SCATERBOYS - AN INTRODUCTION

Size: px
Start display at page:

Download "SCATERBOYS - AN INTRODUCTION"

Transcription

1 Lecture Handout SCATERBOYS - AN INTRODUCTION This handout contains a set of notes provided to support the above named lecture and should be considered along with any accompanying presentation slides and referenced publications. SCATERBOYS - AN INTRODUCTION Learning Outcomes: Describe the ScaterBoys organisation Key Words: Synopsis: Review the ScaterBoys Case To enable holistic and deeper thinking whilst enabling management theory to be put into practice we will adopt a single case running through the module. A BRIEF HISTORY OF SKATEBOARDING Dreamed up by skaters who wanted to surf the streets, Skateboarding was invented in the 1950s in California. Initially boards were home produced, as there were no manufactures of boards until the early 1960s. Skateboarding gained credibility in the 1990s, as ESPN hosted the first ever X games (televised across the world). Skateboarding is an action sport which involves riding and performing tricks using a skateboard. Skateboarding can also be considered a recreational activity or a method of transportation. A skateboard is a small piece of wood in the shape of a surfboard with four wheels attached to it. A lone person rides the skateboard, controlling the movement with their feet. While some use skateboards as transportation over short distances, most are used to perform stunts. SKATEBOARD HARDWARE See Fig 1 The basic elements of the skateboard include the board or deck, the wheels, and the trucks, which connect the wheels to the board, and allow the board to turn. Each skateboard wheel is mounted on its axle via two bearings. Mounting hardware, used to attach the trucks to the board, is a set of eight bolts, usually an Allen or Phillips

2 head, and corresponding locknuts. Risers are used to increase the space between the truck and the deck. This allows the truck to twist further without causing wheel bite (when the wheel touches the deck and stops spinning). In addition, grip tape (a sheet paper or fabric with adhesive on one side and a surface similar to fine sand paper on the other) may be applied to the top surface of a board to allow the rider's feet to grip the surface and help the skater stay on the board while undertaking tricks. Skateboards have been customised in many ways using colour, different materials, sizes, shapes and graphics. SKATEBOARD INDUSTRY Some writers claim that Skateboarding is one of the fastest growing sports not only in America but worldwide. Participants in the sport have been growing exponentially, already surpassing the popularity of several more traditional sports. One of the reasons skateboarding has become so popular (over 15 Million in the US) is that it has such a universal and open appeal. Skateboarding has been a significant business since the late 1970s. Since then skating, and the board sports industry, has been commercially driven. The skateboarding industry has evolved into a multibillion dollar business. It is thought that the hard goods (boards, wheels and trucks) account for a much smaller amount of sales than the softer goods such as clothing, hats and shoes. Consequently, not all consumers are skaters. The skate industry posted U.S. retail sales of approximately $7 billion in 2008 (around $6.2B in 2010) according to the Surf Industry Manufacturers Association (SIMA). The industry is typically made up of manufacturers who create the parts and assemblers who put them together to form a wide variety of products. Downstream, skateboards are typically purchased from specialist shops and the Internet. SKATEBOARD MANUFACTURE Skateboards were first manufactured in the late 1950s. Interest was renewed in the early 1970 s with the introduction of polyurethane wheels, (boards became easier to control and more stunts were possible). Also in the 1970s, skateparks were introduced. Skateparks were specially designed places that catered to skateboarders. They had obstacle courses, pools and pipes (large, circular type) to challenge skateboard riders. With skateparks also came more competition, recognition, and sponsorship. RAW MATERIALS: Most skateboard decks are made of glue and wood (usually maple), but some are made of composites, fiberglass and other artificial materials. They are usually decorated by screen printing. Skateboard trucks are usually made of aluminium or other metal. Wheels are made of polyurethane. While some lowend skateboards are assembled by manufacturers, most components are sold

3 separately to consumers who put them together on their own. THE MANUFACTURING PROCESS See Fig 2 DECK: A piece of maple wood undergoes a treatment that allows it to be peeled into veneers (thin sheets of wood) that are then delivered to the deck factory. Each veneer is then put into a glue machine which evenly coats each veneer with wood glue. Each skateboard is made of several layers of veneer. Stacks are put into a mould inside a hydraulic press. The mould creates the nose, concave, and tail of each skateboard. The resulting laminate sits in the press for anywhere from a few minutes to a few hours. The longer the time, the more naturally the wood and glue set. After the laminates are removed from the press, eight holes for the truck mount are drilled. A worker called the shaper takes the newly drilled board and, with a previously made template, hand shapes each deck with a band saw. The deck is hand sanded and coated with a paint or sealant. After the deck is dry, a decorative design may be added by screen printing. The decks are then dried and readied for shipment. TRUCKS: First a master truck pattern is hand tooled and used to construct a mould for making the actual truck. Aluminium is heated to over 700 C in a furnace, reducing it to a liquid. This liquid aluminium is poured into the mould. The mould has the truck's axles in place before the aluminium is poured in. The mould is allowed to cool, then broken by hand and the parts removed. These pieces include the kingpin knob, pivot cup, baseplate, and riser pad. Using machines, a worker heat treats each part. The parts are then grinded, polished, and drilled. Finally, each truck is handassembled with kingpins, brushings, grommets, washers, and nuts and prepared for shipment. WHEELS: polyurethane is heated to create a liquid. If the wheels are to be coloured, a pigment is added and the resulting mixture is poured into aluminium moulds and allowed to harden into a solid. The wheel is removed by hand and cured on trays. Many wheels are made at the same time on a conveyor system (batch or continuous production process). The resulting wheel slug is cut to shape by hand on a lathe. With a blade, the sidewalls (also known as the radius) and tread (riding surface) are cut into the wheel. The wheel may be decorated, in a semi automated sub process next. The wheels are then packaged for shipment. ASSEMBLING THE SKATEBOARD: After purchasing/manufacturing the three separate components, the consumer or manufacturer must put them together. Once assembled, grip tape is needed to provide traction on the board. Grip tape comes in a large rectangular sheet, bigger than the actual deck. It is smoothed over by hand to

4 get rid of any air bubbles. Using a file, the edge of the board under the grip tape is defined. With a blade or scissors, the extra parts of the grip tape are removed. With an awl or another sharp, pointed object, the eight truck holes are exposed through the grip tape, and the mounting bolts are placed. The truck is then installed over the bolts and tightened with the locknuts. One set of bearings and a spacer are placed on each of the four truck axles. The wheel is then attached, flush with the bearings and spacer. The other set of bearings is put in the wheel. The wheels are secured with washers and a lugnut. The skateboard is now ready to be ridden. QUALITY CONTROL: When the components are purchased separately, the consumer must follow all instructions for their own safety. All screws must be tightly secured so that they will continue to hold the trucks in place while stunts are performed. Manufacturers continually check the finished boards to see that they are secure and meet safety requirements. STARTING YOUR OWN SKATEBOARD SHOP There are many specialised skateboard shops worldwide thousands in the US. There are also numerous board, truck and wheel products created by manufactures. Diversified shops may also sell longboards (a longer variant of a skateboard. It is commonly used for cruising, downhill racing, slalom racing, sliding, and/or transport) and scooters. Ideally, the shop should be in a good location. An ideal site would be near a skate park or an area where skaters happen to visit often. Shops cater for different needs from new to professional skaters. New skaters may find skateboards on the lower price range more attractive until they gain additional experience. While experienced skaters may value higher quality skateboards that are more expensive. Experienced skaters are more likely to purchase parts and assemble boards by themselves whilst the novice will seek out a ready assembled board. Additional products can include T shirts, hats, bags, footwear, and first aid kits. Sources: 6/Skateboard.html ScaterBoys is an example of a small manufacturing company within the skateboarding industry. ScaterBoys offer skateboards as their primary product. They also provide skateboarding accessories and clothing. The company was established as a reseller but has more recently pursued growth through vertical integration and has taken to manufacturing/ assembling its own products using procured parts. The company has a variety of trading goods (purchased in their final form from UK and global suppliers who then resell the products directly to consumers (in direct) and directly to consumers (worldwide). The company is located in an Industrial Warehouse built in In Year 1: there are 21 employees. The company is run by the owner (MD) assisted by an office manager and clerk; and five managers/ team leaders (Plant/ production, Sales, Accounts, Warehouse and Procurement/

5 purchasing). There is a team of five employees responsible for making Skateboard products; a team of three employees are responsible for sales and customer service; two clerks assist the accounts manager (one of whom is part time); there are three warehouse employees (one focuses more on inbound logistics and stock control and the withdrawal of stock/ parts for the production team) the other two focus on picking, packaging and shipping goods outbound. Cleaning services and company accounts are contracted out. WAREHOUSE LAYOUT See Fig 3 BUSINESS PROCESSES: The core business processes include fulfilment, procurement and production. FULFILMENT: A customer order is received by , fax, tele or post by the sales team who enter details into the ScaterBoys system to create an internal sales order. The warehouse pick, pack and ship (using an external courier) the goods. If the customer is a business then an invoice is generated with 28 day terms. Consumers pay at the time of placing an order (typically by credit card). Accounts process the payment of invoices (receivables) as they arrive. PROCUREMENT: When inventory is running low or a customer orders goods not in stock, procurement place orders with suppliers. Goods are then received in bound at the warehouse who then store the goods and update systems accordingly. Accounts will receive the invoice from suppliers and will then pay the supplier. PRODUCTION: The production manager plans operations based on either a supply (make to stock) or customer led approach; though they tend to make to order. Upon the issuance of a planned order, the warehouse withdraws the parts needed by the production team to make the Skateboards. The boards are assembled and then placed into the inventory. INFORMATION SYSTEMS: Until recently the company had utilised several standalone computers. A SAGE application was used to manage orders and accounts, a custom built access database managed the inventory. Spreadsheet packages were used to manage suppliers and products. This was, however, far from satisfactory with employees having to go from computer to computer to swap files and printout forms to instigate work etc. In some cases data had to be printed from one system and re entered into another. As a result of a number of problems, growth and a desire to be more efficient, the company recently procured a new integrated and networked system to manage all operational and primary aspects of the company. This new system eliminated the

6 problem of having to re enter data and have multiple versions on different computers. Everyone now had access to the same information but actions are restricted by a user set of privileges. REVENUES: In the first year that you encounter the company they record annual revenues of 3M. Revenues grow in the second year. see Case Study reproduced with permission Dr Phil Kelly 2013 (adapted from Magal, S. and Word, J. (2009), 'Essentials of Business Processes and Information Systems', Wiley)

7 ACTIVITY: 1 Activity duration (mins): 30 AN INTRODUCTION TO SCATERBOYS Briefing Discuss the case

8 Figures FIGURE: 1 SKATEBOARD HARDWARE

9 FIGURE: 2 THE MANUFACTURING PROCESS

10 FIGURE: 3 WAREHOUSE LAYOUT

MR. M S WORLD Price List

MR. M S WORLD Price List MR. M S WORLD Price List www.skateboardsforschools.com Ph: 612-669-7178 Email: chad@skateboardsforschools.com About Our Skateboards All our boards are 100% slow growth maple. While most all skateboards

More information

MR. M S WORLD Price List

MR. M S WORLD Price List MR. M S WORLD Price List www.skateboardsforschools.com Ph: 612-669-7178 Email: chad@skateboardsforschools.com About Our Skateboards All our boards are 100% slow growth maple. While most all skateboards

More information

SCATERS CASE (1) COMPANY BACKGROUND

SCATERS CASE (1) COMPANY BACKGROUND Scaters Simulation Outputs File: 1 SCATERS CASE (1) COMPANY BACKGROUND Scaters, Atlantic Buildings, Harrington Rd, Brunswick Business Park, Liverpool, Merseyside L3 4BH Company No. B029756470 Date of Incorporation:

More information

Carving a Custom Seat

Carving a Custom Seat Carving a Custom Seat Seat Carving your own seat from mini-cell, high-density foam is really quite simple and has proven to be more comfortable than any commercially produced seat and often more reasonably

More information

Engineering (JUN ) General Certificate of Secondary Education June 2014 TOTAL. Time allowed 1 hour

Engineering (JUN ) General Certificate of Secondary Education June 2014 TOTAL. Time allowed 1 hour Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials Question Mark General Certificate of Secondary Education June 2014 Engineering 48501 Unit 1

More information

INSTALLING YOUR CLC RUDDER

INSTALLING YOUR CLC RUDDER INSTALLING YOUR CLC RUDDER These instructions are written to help you install the CLC rudder kit on your wooden kayak. The rudder can be fitted to your boat during construction or after completion. Please

More information

Pre-Paint>Fuselage>Empennage>Fit vertical tail fin. Objectives of this task: Materials and equipment required: Fit the spar extender

Pre-Paint>Fuselage>Empennage>Fit vertical tail fin. Objectives of this task: Materials and equipment required: Fit the spar extender Pre-Paint>Fuselage>Empennage>Fit vertical tail fin Objectives of this task: To fit the vertical tail fin to the fuselage, including fitting the static probe, static tube, optional strobe light wiring and

More information

SUMMER FUN AT SKATEYOGI STARTS ON JUNE 19, 2017! SKATEYOGI SUMMER CAMP 2017 CATALOG

SUMMER FUN AT SKATEYOGI STARTS ON JUNE 19, 2017! SKATEYOGI SUMMER CAMP 2017 CATALOG SUMMER FUN AT SKATEYOGI STARTS ON JUNE 19, 2017! SKATEYOGI SUMMER CAMP 2017 CATALOG WEEKLY CAMPS FROM 6/19 8/18. FOR GRADES K 5. 8:30AM 3:30PM. EXTENDED DAY AVAILABLE. GREETINGS FROM OUR FOUNDER Dear Friends,

More information

1 P age. Wheel Owner

1 P age. Wheel Owner 1 P age Wheel Owner Information 2 P age Congratulations, you have just purchased the best hand built wheels available. These wheels represent more than 50 years of experience by the founders of Pro-Lite.

More information

Seamax Boat Bimini Top User Manual

Seamax Boat Bimini Top User Manual Seamax Boat Bimini Top User Manual Size A / B / C 3 BOW Size D / E / F 4 BOW Thanks for your purchase. Seamax Bimini Top has built-in the aluminum eye-end fitting to install on standard oar lock pin (diameter

More information

Thanks for shopping with Improvements! 20 Reel Mower with Catcher Item #

Thanks for shopping with Improvements! 20 Reel Mower with Catcher Item # Thanks for shopping with Improvements! 20 Reel Mower with Catcher Item # 411837 To order, call 1-800-642-2112 West Chester, OH 45069 0313 If you have any questions regarding this product, call 1-800-642-2112

More information

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING VOLLEYBALL SPIKE TRAINER Model # VST-100 Assembly Instructions Owner s Manual WARNING To ensure safety, do not attempt to assemble this system without following all instructions carefully. Check entire

More information

RADROVER REAR RACK INSTALLATION MANUAL

RADROVER REAR RACK INSTALLATION MANUAL RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for

More information

TURF BROOM ATTACHMENT ASSEMBLY KIT

TURF BROOM ATTACHMENT ASSEMBLY KIT TURF BROOM ATTACHMENT ASSEMBLY KIT INSTRUCTION BOOKLET Wood Bay Turf Technologies, 2012 1 Revised March 2012 PURPOSE OF THE KIT The purpose of this greensiron 3900, turf BROOM Kit is to enable owners of

More information

E-trike Li Assembly Guide

E-trike Li Assembly Guide PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box

More information

How to Setup & Repair a Complete Skateboard

How to Setup & Repair a Complete Skateboard Another ebookwholesaler Publication How to Setup & Repair a Complete Skateboard by Tim Swike Proudly brought to you by Jacob Gan Email Recommended Resources Web Site Hosting Service Internet Marketing

More information

-Round Down- Description & Overview. VEX Classroom Competition Round Down

-Round Down- Description & Overview. VEX Classroom Competition Round Down -Round Down- Description & Overview Round Down is a head-to-head robotics competition designed and scaled to be run in a classroom environment by a single teacher. This game provides a challenge for designers

More information

Advantage Lockers & Bike

Advantage Lockers & Bike Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience

More information

BICYCLE ACCESS RAMP INSTALLATION INSTRUCTIONS. Customer Service all4cycling.com.au

BICYCLE ACCESS RAMP INSTALLATION INSTRUCTIONS. Customer Service all4cycling.com.au BICYCLE ACCESS RAMP INSTALLATION INSTRUCTIONS Customer Service 1300 429 254 all4cycling.com.au Thanks for buying our Bicycle Access Ramp! You re now the proud owner of the Bike Fixation Bicycle Access

More information

HELMETS SAVE LIVES!!! ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR SCOOTER. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET CONDITIONS.

HELMETS SAVE LIVES!!! ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR SCOOTER. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET CONDITIONS. HELMETS SAVE CORRECT FITTING - MAKE SURE YOUR HELMET COVERS YOUR FOREHEAD. LIVES!!! ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR SCOOTER. DO NOT RIDE AT NIGHT. AVOID RIDING IN WET CONDITIONS.

More information

Grandpa's Homemade Rocket for About a Dollar!

Grandpa's Homemade Rocket for About a Dollar! Grandpa's Homemade Rocket for About a Dollar! Grandpa and Granny Co. 2012 The most common items needed: (The number of Rocket parts from each item is before the parts name and its proportionate cost is

More information

Contents. Stainless Steel Side Block. 1.1 Separating the Side Block. Stainless Steel Side Block Reassembly of. Assembly from the Helmet Shell

Contents. Stainless Steel Side Block. 1.1 Separating the Side Block. Stainless Steel Side Block Reassembly of. Assembly from the Helmet Shell Separating the Side Block Assembly from the Helmet Shell Contents SSB-1 SSB-3 SSB-5 SSB-5 SSB-7 1.1 Separating the Side Block Assembly from the Helmet Shell 1.2 Side Block Assembly Replacement 1.3 Defogger

More information

Pure, Simple, Fun. Paddlesurf

Pure, Simple, Fun. Paddlesurf Pure, Simple, Fun. Paddlesurf Boards All-around These boards form the core of our sport: fun, versatile designs that can take you from entrylevel flat water paddling to playing in the surf. Stability is

More information

Surfboard Repairs Chapter 7

Surfboard Repairs Chapter 7 Surfboard Repairs Chapter 7 The Complete Surfing Guide for Coaches - Bruce "Snake" Gabrielson Repair Problems Boards continuously get bumped, hit rocks, break fins, get dropped, and many other things that

More information

Operator s Safety Manual Sumner Max Jax / Beam Jax

Operator s Safety Manual Sumner Max Jax / Beam Jax May 2013 Operator s Safety Manual Sumner Max Jax / Beam Jax www.sumner.com 7514 Alabonson Road Houston, TX 77088 U.S.A ph: 281.999.6900 fax: 281.999.6966 75 Saltsman Drive Unit 5 Cambridge, ON N3H 4R7

More information

Hip Block Installation Instructions:

Hip Block Installation Instructions: Hip Block Installation Instructions: The instructions that follow are shown for our low profile hip blocks installed in a Storm Chaser M C-1. However, the very same technique can be used for any of our

More information

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)

#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B) Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic

More information

Parts List. Description. Additional Considerations. Installation Instructions. Dual/Elite Hydraulic Treadmill Kit (supplied by EPI)

Parts List. Description. Additional Considerations. Installation Instructions. Dual/Elite Hydraulic Treadmill Kit (supplied by EPI) Page 1 of 9 Parts List Dual/Elite Hydraulic Treadmill Kit (supplied by EPI) Qty Description Treadmill Body 1 Treadmill Power Unit (per Treadmill Body) 2 Treadmill Decks (per Treadmill Body) 1 Treadmill

More information

TRAILMATE METEOR ASSEMBLY MANUAL

TRAILMATE METEOR ASSEMBLY MANUAL TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster

More information

Blazer Marine, Whiplash Sport 40

Blazer Marine, Whiplash Sport 40 Blazer Marine, Whiplash Sport 40 Thank you for choosing to build the Whiplash 40. We have spent over 12 years perfecting this design, and finally we are making it available to the world. We are excited

More information

602 STRINGING MACHINE OWNER'S MANUAL

602 STRINGING MACHINE OWNER'S MANUAL PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...

More information

TM D E A L E R C A T A L O G

TM D E A L E R C A T A L O G 2019 DEALER CATALOG TM TM NEW 2019 FOR Cheek Block K082200-1 Zig Cleat K043550-1 Ring Clip K199250-1 Accessory Track 4" K736104-1 8" K736108-1 12" K736112-1 16" K736116-1 Webbing Clip K199200-1 Paddle

More information

business guide invest.moregoldcoast.com.au

business guide invest.moregoldcoast.com.au inspired by lifestyle driven by opportunity surf AND SKATE business guide surf expo 2018 invest.moregoldcoast.com.au This publication has been prepared as an information source only. Council of the City

More information

42 inch Mower for TimeCutter Z Riding Mowers. Note: Determine the left and right sides of the machine from the normal operating position.

42 inch Mower for TimeCutter Z Riding Mowers. Note: Determine the left and right sides of the machine from the normal operating position. Recycler Form No. -7 Kit inch Mower for TimeCutter Z Riding Mowers Model No. 798 Note: Determine the left and right sides of the machine from the normal operating position. Loose Parts Note: Use the chart

More information

-- SGP (NOVA TEAM SQUARE)

-- SGP (NOVA TEAM SQUARE) -- SGP-100 -- (NOVA TEAM SQUARE) Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-B Page 1 of 9 JAYPRO SPORTS

More information

TOURNAMENT ICE. 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual

TOURNAMENT ICE. 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual TOURNAMENT ICE 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual Thank you for purchasing a Gold Standard Games product. All of us at Gold Standard Games want you to be

More information

The new CryoEase Service - your No. 1 choice of gas supply

The new CryoEase Service - your No. 1 choice of gas supply The new CryoEase Service - your No. 1 choice of gas supply The CryoEase Service is an innovative alternative to customers using conventional supply mode. Using the CryoEase Service allows you to enjoy

More information

AGM 33 PIKE ALL FIBERGLASS. Specifications Length: 92 Diameter 5.5 Weight: 24 lbs Motor Mount: 75mm Fins: 6-3/16 G10 CP: 68 from nose tip Parts List

AGM 33 PIKE ALL FIBERGLASS. Specifications Length: 92 Diameter 5.5 Weight: 24 lbs Motor Mount: 75mm Fins: 6-3/16 G10 CP: 68 from nose tip Parts List ALL FIBERGLASS AGM 33 PIKE Specifications Length: 92 Diameter 5.5 Weight: 24 lbs Motor Mount: 75mm Fins: 6-3/16 G10 CP: 68 from nose tip Parts List (1) Filament Wound Nose Cone w/ Metal Tip (1) Nose Cone

More information

OWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved

OWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE

More information

tubepress press procedure

tubepress press procedure tubepress press procedure tubepress 15mm up to 35mm tubepress 15 mm up to 35 mm 1. The tube ends must be clean with no scratches or grooves. Remove end caps. Cut tube to length. 2. Deburr tube inside and

More information

BIKETRIAL FEDERATION FULL RULES 2017

BIKETRIAL FEDERATION FULL RULES 2017 BIKETRIAL FEDERATION FULL RULES 2017 The rules within this document are for British National events (Cup & Championship). They should be used as a guideline for Club rules, but clubs may change anything

More information

BJC HEAVY INDUSTRIES PCL. GALVANIZING GRATING BUILT-UP BEAM

BJC HEAVY INDUSTRIES PCL. GALVANIZING GRATING BUILT-UP BEAM BJC HEAVY INDUSTRIES PCL. GALVANIZING GRATING BUILT-UP BEAM BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED BJC HEAVY INDUSTRIES PUBLIC COMPANY LIMITED With the company s slogan as New Force in Heavy Industries,

More information

KRYPTONICS SKATEBOARD

KRYPTONICS SKATEBOARD KRYPTONICS SKATEBOARD FALL 2016 - SPRING 2017 info@redipro.es www.redipro.es Distribuidor Exclusivo España y Portugal: REDIPRO, S.L. 22in LOCKERBOARD 22 x 5,75, 9 ply maple concave w/ double kick tail,

More information

Unidirectional fiberglass Eva deck pad 0.6mm Australian pine wood veneer, deck + bottom. Eva deck pad. 2 part epoxy paint

Unidirectional fiberglass Eva deck pad 0.6mm Australian pine wood veneer, deck + bottom. Eva deck pad. 2 part epoxy paint urf Line 2011 Boards Surf All-around 9 9 Surf Amundson 11 3 Dedicated to surf, the 9 9 is designed with a fast wave rocker for early entry and down-the-line speed. The outline and rail shape draw from

More information

Pintail. Kicktail Drop through

Pintail. Kicktail Drop through General longboard introduction Invented during the 1950 s, longboards were mainly built for racing downhill or general transportation. Longboarding is often described as surfing on concrete because the

More information

This document to be used with Hurley traditional Davits

This document to be used with Hurley traditional Davits ~ InstructIon Manual ~ This document to be used with Hurley traditional Davits WarnIngs WarnIng - Failure to install, maintain, protect, and operate the system properly can cause malfunction resulting

More information

Contents page. ISA. Page 3 About... Page 3 Objectives Page 3 Areas.. Page 3 Offices Page 3

Contents page. ISA. Page 3 About... Page 3 Objectives Page 3 Areas.. Page 3 Offices Page 3 2015 Season Contents page ISA. Page 3 About.... Page 3 Objectives Page 3 Areas.. Page 3 Offices Page 3 Championship Structure. Page 4 Regional.. Page 4 World Page 4 Rules and Regulations. Page 4 Competition

More information

TABLE OF CONTENTS FRAME FEATURES INTRODUCTION

TABLE OF CONTENTS FRAME FEATURES INTRODUCTION S3 DISC MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable

More information

The Aldwych Speed Club. Members Handbook.

The Aldwych Speed Club. Members Handbook. The Aldwych Speed Club Members Handbook www.aldwychspeedclub.org This hand book is primarily directed at our new and prospective members. There are however, some sections that even our veteran skaters

More information

Global Bike Inc. Background and overview of GBI strategy and operations.

Global Bike Inc. Background and overview of GBI strategy and operations. Global Bike Inc. Background and overview of GBI strategy and operations. Product SAP ERP G.B.I. Release 6.07 Level Beginner Focus Company Background Authors Simha Magal Stefan Weidner Jeff Word Version

More information

BackCountry ebikes 2019 MULE Assembly

BackCountry ebikes 2019 MULE Assembly BackCountry ebikes 2019 MULE Assembly Required Tools: Cutting Pliers (to cut box poly strapping and heavy bike banding) Scissors (to remove bubble wrap) Allen wrenches (3mm, 4mm, 5mm, 6mm) Wrenches (10mm,

More information

Building a Wind Tunnel

Building a Wind Tunnel Technical Report TR-5 Building a Wind Tunnel Estes Industries 1963 These reports are published as a service to its customers by Estes Industries, Inc., Box 227, Penrose, Colorado 81240 Building a Wind

More information

A Figure Skate Sharpening Machine, version 1.1

A Figure Skate Sharpening Machine, version 1.1 A Figure Skate Sharpening Machine, version 1.1 By R. G. Sparber Copyleft protects this document. 1 This article provides a high level view of a figure skate sharpening machine I recently built. No plans

More information

275 RID Assembly Instructions

275 RID Assembly Instructions 75 RID Assembly Instructions Part No. 0003003 v. Lscsep0 PARTS LIST (Specifications and contents subject to change without notice) Description Part # A. RID Track...0000050 B. Capacity Plate...0053 C.

More information

HYDRAULIC PALLET TRUCKS. MODEL Nos: PT550BC, PT685BC, PT550NC, PT685NC OPERATION & MAINTENANCE INSTRUCTIONS

HYDRAULIC PALLET TRUCKS. MODEL Nos: PT550BC, PT685BC, PT550NC, PT685NC OPERATION & MAINTENANCE INSTRUCTIONS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550BC, PT685BC, PT550NC, PT685NC OPERATION & MAINTENANCE INSTRUCTIONS 0711 WARNING! PT550NC MAXIMUM LOAD - 2000KG PT685NC MAXIMUM LOAD - 2000KG PT550BC MAXIMUM LOAD

More information

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:

Made in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks: Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level

More information

Oversized Pulley Wheel System for Shimano Mounting & Maintenance

Oversized Pulley Wheel System for Shimano Mounting & Maintenance Oversized Pulley Wheel System for Shimano Mounting & Maintenance Congratulations with your new CeramicSpeed Oversized Pulley Wheel System for Shimano Personally, I want to thank you for joining the growing

More information

KMX Kompact Sports Trike

KMX Kompact Sports Trike KMX Kompact Sports Trike Assembly Instructions 1.0 Introduction Thank you for choosing KMX! When properly assembled and set up your KMX will provide many years of enjoyment. KMX Karts Ltd does its utmost

More information

Construction of the Eddie Drifter Versions 1.0 through 1.2

Construction of the Eddie Drifter Versions 1.0 through 1.2 Construction of the Eddie Drifter Versions 1.0 through 1.2 (Revised 20 October 2010 by JiM.) Introduction In the summer of 2010, we began experimenting with alternative drifter designs. While the standard

More information

2-4 YEARS RIDER CONSTRUCTION MANUAL cm 30 kg 90 min. Length Max weight Time to build

2-4 YEARS RIDER CONSTRUCTION MANUAL cm 30 kg 90 min. Length Max weight Time to build RIDER CONSTRUCTION MNUL 2-4 YERS Length Max weight Time to build 88-98 cm 30 kg 90 min WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product, please carefully read the following

More information

WHITE WOLF. X-ray View MID POWER MODEL ROCKET KIT BUILDING INSTRUCTIONS KIT SPECIFICATIONS:

WHITE WOLF. X-ray View MID POWER MODEL ROCKET KIT BUILDING INSTRUCTIONS KIT SPECIFICATIONS: WHITEWOLF-38 PARTS LIST 1 - Nose Cone 1-17" Airframe 1-6" Motor Tube 3 - Aft Fins 3 - Forward Fins 2 - Centering Rings 1-15" Parachute 2 - launch lugs 1-12 Kevlar Shock Cord 1 - Motor Retention >>(screw/washer)

More information

OUTDOOR BACKSTOP WITH 5'-0" EXTENSION

OUTDOOR BACKSTOP WITH 5'-0 EXTENSION INSTALLATION INSTRUCTIONS OUTDOOR BACKSTOP WITH 5'-0" EXTENSION NoUU. 00175- _ READ ALL INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO INSTALL THIS EQUIPMENT. INSTALLATION / ASSEMBLY OF THIS EQUIPMENT MUST

More information

CATERPILLAR XL G2 YEARS CONSTRUCTION MANUAL

CATERPILLAR XL G2 YEARS CONSTRUCTION MANUAL 6-14 CTERPILLR XL G2 YERS CONSTRUCTION MNUL Length Max weight Time to build 120-168 cm / 47-66 inch 70 kg / 153 lbs 2 hours WRNING - IMPORTNT NOTICE TO PRENTS efore you start constructing and use our product,

More information

Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and

Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and Congratulations on your purchase of a JC Series Performer trike! The Performer JC Series is designed for everything from touring to commuting and shopping in the city. The JC Series frames are made of

More information

TURF VENTILATOR ATTACHMENT ASSEMBLY KIT INSTRUCTION BOOKLET

TURF VENTILATOR ATTACHMENT ASSEMBLY KIT INSTRUCTION BOOKLET TURF VENTILATOR ATTACHMENT ASSEMBLY KIT INSTRUCTION BOOKLET Wood Bay Turf Technologies, 2012 1 PURPOSE OF THE KIT The purpose of this greensiron 3900, turf VENTILATOR Kit is to enable owners of our turf

More information

Soling Building Tips II

Soling Building Tips II Soling Building Tips II Prepared: Arthur Deane Jan 20, 2002 adeane@ic.net Introduction The following are some lessons learned and experience gained in building a Soling kit. The plan developed is based

More information

9 Technology in sport

9 Technology in sport 9 Technology in sport I Switch on Look at the picture of a mountain bike and its rider. Match the items of the rider's clothing and the bike components to the materials in the table. brake cables rims

More information

Trim Tab Wind Vane for boats with transom mounted rudders

Trim Tab Wind Vane for boats with transom mounted rudders Trim Tab Wind Vane for boats with transom mounted rudders If your boat has a transom mounted rudder, you can build this self-steering windvane for around $150, using regular wood working tools and some

More information

PACK 24 RAINGUTTER REGATTA November 19, 2010 (7pm at Hawthorne)

PACK 24 RAINGUTTER REGATTA November 19, 2010 (7pm at Hawthorne) PACK 24 RAINGUTTER REGATTA November 19, 2010 (7pm at Hawthorne) Welcome to the Pack 24 Raingutter Regatta! Get ready for a night of excitement, action and a lot of hot air. The premise of Raingutter Regatta

More information

Panoptix PS51-TH FrontVü/LiveVü Thruhull

Panoptix PS51-TH FrontVü/LiveVü Thruhull Panoptix PS51-TH FrontVü/LiveVü Thruhull Transducer Installation Instructions Important Safety Information WARNING See the Important Safety and Product Information guide in the chartplotter or fishfinder

More information

OPERATOR'S MANUAL. MODEL GC-F4 Fabric Grass Catcher P/N 9055 GRASS CATCHER GC-F4. PART Rev.2 SC301G

OPERATOR'S MANUAL. MODEL GC-F4 Fabric Grass Catcher P/N 9055 GRASS CATCHER GC-F4. PART Rev.2 SC301G OPERATOR'S MANUAL MODEL GC-F4 Fabric Grass Catcher P/N 9055 GRASS CATCHER GC-F4 1 2 8 11 10 9 5 6 7 4 3 SC301G PART 03213 Rev.2 SAFETY INSTRUCTIONS Your mower is only as safe as the operator! As with any

More information

OPERATOR S MANUAL. Fabric Grass Catcher PART NO PRINTED 1/2011 PRINTED IN USA

OPERATOR S MANUAL. Fabric Grass Catcher PART NO PRINTED 1/2011 PRINTED IN USA OPERATOR S MANUAL Fabric Grass Catcher Models: GC-F4 Congratulations on owning a Scag mower! This manual contains the operating instructions and safety information for your Scag mower accessory. Reading

More information

Straightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet

Straightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet Sliding & Folding Door Systems Coburn Product Data Sheet Straightaway 0 Sliding & Folding Door Systems Product Overview The Straightaway 0 is a quiet and dependable system designed for interior and exterior

More information

Marking films - Application guide

Marking films - Application guide Marking films - Application guide The application techniques that we will describe should help users by making their job easier, or by saving them time. However, we know that all the advice in the world

More information

How does nordic skiing differ from alpine skiing?

How does nordic skiing differ from alpine skiing? 1 How does nordic skiing differ from alpine skiing? nordic Skis are design for both uphill and downhill travel. Skis need to both grip and glide. Bindings are free heel to allow for a natural stride. Muscled

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Ballpark Classics Baseball Game MLB Edition Figure B Read the instructions completely before beginning g assembly. You will need a Phillips screwdriver. 1. Remove the game from the

More information

About ProEdge Bowling Celebrating Over 30 Years in the Bowling Industry

About ProEdge Bowling Celebrating Over 30 Years in the Bowling Industry www.proedgebowling.com About ProEdge Bowling ProEdge Bowling has been providing advanced pro shop tools and accessories to the domestic and international bowling community for over 30 years. Our unique

More information

IMPORTANT: RECEIVING INSTRUCTIONS:

IMPORTANT: RECEIVING INSTRUCTIONS: Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage

More information

Fitting Instructions for Single Line Mainsail Reefing System For Yachts Up To 9m (30ft) - Part No

Fitting Instructions for Single Line Mainsail Reefing System For Yachts Up To 9m (30ft) - Part No Fitting Instructions for Single Line Mainsail Reefing System For Yachts Up To 9m (30ft) - Part No. 41 130 This single line reefing kit allows reefing control lines to be led aft to the safety of the cockpit.

More information

SURF-AIR MOBILE ATTRACTION TECHNICAL SPECIFICATION

SURF-AIR MOBILE ATTRACTION TECHNICAL SPECIFICATION SURF-AIR MOBILE ATTRACTION TECHNICAL SPECIFICATION Prepared For Annette Matthews Australian Waterslides & Leisure Pty Ltd PO Box 1168, Beenleigh QLD 4207 Australia Murphy s Waves Ltd Euro House, 423 Hillington

More information

ICE PROTECTION - PROPELLER

ICE PROTECTION - PROPELLER ICE PROTECTION - PROPELLER. DESCRIPTION This section describes the portion of the Ice Protection System pertaining to the propeller. This includes the slinger ring and the de-icing propeller boots. Grooved

More information

TECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS

TECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS page 1 ORANGE PIVOT TOOL INSTRUCTIONS This is a guide of how to change the pivot bearings on an Orange frame with a bore style pivot axle. 4 8 Bore Type Pivot Axle Horiz-Hold Type Pivot Axle Please read

More information

Depth sensor. Product reference : REV 1. USER GUIDE and INSTALLATION GUIDE. nke Sailing competition

Depth sensor. Product reference : REV 1. USER GUIDE and INSTALLATION GUIDE. nke Sailing competition Depth sensor Product reference : 90-60-456 REV 1 USER GUIDE and INSTALLATION GUIDE nke Sailing competition Z.I. Kerandré Rue Gutenberg 56700 HENNEBONT- FRANCE http://www.nke.fr After sale service n 33

More information

TaylorMade Golf Company Introduces New OS & OS CB Putters

TaylorMade Golf Company Introduces New OS & OS CB Putters TaylorMade Golf Company Introduces New OS & OS CB Putters Large, High MOI Designs Specifically Engineered to MaximizeStability and Forgiveness CARLSBAD, Calif. (January 20, 2016) TaylorMade Golf Company

More information

Methylethycetone (MEC) - PMS 60 polyurethane glue - Grease - White silicone

Methylethycetone (MEC) - PMS 60 polyurethane glue - Grease - White silicone CHAPTER PLAN page : 1/8 SAILING BOAT SUSPENDED WITHOUT DECK BEARING SAILING BOAT SUSPENDED WITH DECK BEARING SAILING BOAT SUSPENDED WITH AUTOMATIC BEARING ALIGNMENT RUDDER SYSTEM FOR ANTARES MOTOR BOAT

More information

E Manual Self tacking system 30

E Manual Self tacking system 30 597-205-E 2015-12-09 Manual Self tacking system 30 1 Self tacking system 30, 443-200-10 A self-tacking jib makes life on board a lot easier, in particular for shorthanded crews. The jib sheet is led to

More information

Foam Plate Glider: Sonic Silhouette

Foam Plate Glider: Sonic Silhouette Designed by: Ritchie Kinmont Project #40 Page 1/25 Foam Plate Glider: Sonic Silhouette About this project: The Foam Plate Glider Sonic Silhouette is the first in a series of flying glider projects made

More information

Service Bulletin 70. Subject: Vertical fin cracks. Applicability: All Sportsman aircraft

Service Bulletin 70. Subject: Vertical fin cracks. Applicability: All Sportsman aircraft Subject: Vertical fin cracks Applicability: All aircraft Issue: Inspection of the vertical fin and aft fuselage bulkheads B and C, repair of vertical fin and bulkheads and reinforcement of vertical fin

More information

Fish Key Holder. Materials: - 18 gauge sheet steel - 1/4" steel rod ( 1.5 feet is enough ) - Rivets. Material cost: $8 ( with plenty of leftovers )

Fish Key Holder. Materials: - 18 gauge sheet steel - 1/4 steel rod ( 1.5 feet is enough ) - Rivets. Material cost: $8 ( with plenty of leftovers ) Fish Key Holder Materials: - 18 gauge sheet steel - 1/4" steel rod ( 1.5 feet is enough ) - Rivets Material cost: $8 ( with plenty of leftovers ) Safety Equipment: - Thick gloves - Goggles - Ear Protection

More information

high tech ski & snowboard tuning tools

high tech ski & snowboard tuning tools research design made with HIGH TECH Born in 1975, the SKI MAN trade-mark has become internationally known thanks to his high-tech and high-quality products for ski and snowboard hand tuning. Our relationship

More information

Tugster. Tug Boat. Competition or Sport Tug Kit. A Zippkits R/C Boat. Building Instructions

Tugster. Tug Boat. Competition or Sport Tug Kit. A Zippkits R/C Boat. Building Instructions Z I P P M A N U FA C T U R I N G Tugster Tug Boat Competition or Sport Tug Kit A Zippkits R/C Boat Building Instructions 2016 JMP Hobby Group St. Paul, Indiana 47272 www.zippkits.com Toll Free (866) 922-ZIPP

More information

Assembly Instructions And User Guide

Assembly Instructions And User Guide EZ-1/EZ-CLASSIC QUADRIBENT By Blackbird Designs Inc. Mark 5.2 June 2011 Assembly Instructions And User Guide 1 The Quadribent is 2-seat, side-by-side, human powered vehicle that enables almost anyone to

More information

Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project.

Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Greg Cowens' $10 PVC Roller Reefing for CP-16's by Greg Cowen Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Materials: 2

More information

Surfing the 3D printing wave: the changing face of surfboard fin production

Surfing the 3D printing wave: the changing face of surfboard fin production University of Wollongong Research Online Faculty of Science, Medicine and Health - Papers Faculty of Science, Medicine and Health 2017 Surfing the 3D printing wave: the changing face of surfboard fin production

More information

British Showjumping Course Designers Education System COMPETENCIES REQUIRED

British Showjumping Course Designers Education System COMPETENCIES REQUIRED British Showjumping Course Designers Education System COMPETENCIES REQUIRED Competencies for all British Showjumping Course Designers Course Designers Course Designers should be able to demonstrate a good

More information

microtec 865 New from Beissbarth: wheel-balancing with the electronic easyfix data recording arm. All the best for your automobile service.

microtec 865 New from Beissbarth: wheel-balancing with the electronic easyfix data recording arm. All the best for your automobile service. New from Beissbarth: wheel-balancing with the electronic easyfix data recording arm. All the best for your automobile service. Technology and user convenience guarantee high performance in your workshop.

More information

KERSPLASH POOL CLIMBING WALL INSTALLATION INSTRUCTIONS

KERSPLASH POOL CLIMBING WALL INSTALLATION INSTRUCTIONS TOLL FREE: 1-800-476-7366 VOICE 651-665-9131 FAX 651-665-9130 EMAIL: INFO@POOLCLIMBINGWALLS.COM EVERLAST CLIMBING 1335 MENDOTA HEIGHTS ROAD MENDOTA HEIGHTS, MN 55120 2012 EVERACTIVE BRANDS Congratulations!

More information

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved

OWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE

More information

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes

Moai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of

More information

Reebok Invents Liquid Factory Tech to 3D Draw Shoes

Reebok Invents Liquid Factory Tech to 3D Draw Shoes Reebok Invents Liquid Factory Tech to 3D Draw Shoes Numerous athletic wear companies have been incorporating 3D printing, not just into the prototyping of new products, but into the production of end parts

More information