Cameron MBS Multi-Bowl Wellhead System
|
|
- Evan Shaw
- 5 years ago
- Views:
Transcription
1 Cameron MBS Multi-Bowl Wellhead System
2 MBS Multi-Bowl Wellhead System Tubing Head Adapter Tubing Hanger Upper Casing Spool Pack-off Bushing Emergency Slip and Seal Assembly Lower Casing Head Standard MBS and MBS Pack-off Support Bushing Emergency C-1 and MBS Pack-off Support Bushing SD016672
3 MBS Multi-Bowl Wellhead System The Cameron MBS Multi-Bowl Wellhead System is a compact, unitized wellhead which can be used as an alternative to conventional wellhead systems in onshore and platform applications. The MBS Wellhead offers the following advantages over conventional systems: The lower and upper casing heads are installed as a single unit, saving installation time. The casing and tubing can be installed, landed and sealed through the BOP stack, increasing safety and saving rig time normally required to remove and reinstall the BOP stack during conventional wellhead installations. Uses many conventional wellhead components and practices. Components of the MBS Wellhead System are based on field-proven technology and offer a range of features including: Lower Casing Head The lower casing head incorporates a slip-on weld bottom connection with a single O-ring to seal between the casing stub and the casing head inside diameter. The lower casing head is available with line pipe threaded, flanged or studded outlets. The casing head incorporates a straight-bore design with a 45 load shoulder for casing hanger support. This design minimizes hoop load on the housing, provides a high hanging capacity and reduces the risk of bowl damage due to drill stem rotation. Upper Casing Spool The upper casing spool is a straight-bore design. The casing spool includes two sets of type N lockscrews to lockdown wellhead components. These lockscrews are designed with the packing in front of the threads to prevent contamination of the threads by wellbore fluid. The spool is available with studded outlets. The MBS Wellhead casing hanger is a high-capacity, mandrel-type hanger which is rated to the full joint strength of the suspended casing. The hanger is designed with integral flutes which allow cement returns to pass up through the BOP stack. Pack-off Bushing The MBS Wellhead pack-off bushing lands on the casing hanger to suspend and seal the intermediate casing string(s). The inner seal on the bushing is a D seal which is energized by plastic packing. This seal can be reenergized, if necessary, throughout the life of the well. The outer seal is radially energized. Tubing Hangers The MBS Wellhead tubing hanger lands on the pack-off bushing and is locked in place with N lockdown screws. Several alternative tubing hangers are available including the coupling (HT, HT-2), tubingless (TLC), mandrel (CXS, T), and dual (MB-CDT and MB-TLC). Control line options are available for most applications. A comparison of these tubing hangers is available on the MBS Tubing Hanger Comparison chart. Tubing Head Adapter The MBS tubing head adapter provides the connection point for the Christmas Tree. t is available in several types to fit individual applications. Emergency Slip and Seal Assemblies n the event that casing becomes stuck and slips must be set, the upper casing spool may be lifted to install a sliptype hanger, cut off the casing and install the emergency pack-off bushing assembly. This feature eliminates the expensive, time consuming process of cutting pipe inside the head with internal casing cutters. Auxiliary Equipment The MBS Wellhead System has a complement of installation tools including BOP test plugs, wear bushings and handling tools.
4 MBS Component Options Standard and Pack-off Bushing Emergency and Pack-off Bushing MBS Pack-off Support Bushing MBS Dual Pack-off Support Bushing MBS Emergency Pack-off Support Bushing MBS Dual Emergency Pack-off Support Bushing MBS Fluted C-1 Emergency Wellhead Options SD MBS Multi-Bowl Wellhead MBS Multi-Bowl Wellhead with Trulok Bottom
5 MBS Tubing Hanger Options HT Completion HT-2 Completion TLC Completion CXS Completion SD T Completion MB-TLC Dual Completion MB-CDT Dual Completion MBS Tubing Hanger Comparison Name Single/Dual Type Body Seal Neck Seal Control Line HT Single Coupling Elastomer Elastomer None HT-2 Single Rotatable Coupling Elastomer Elastomer None TLC Single Mandrel Elastomer Metal None CXS Single Mandrel Elastomer Elastomer Optional, Non-Continuous T Single Mandrel Elastomer Metal Optional, Continuous MB-TLC Dual Split Elastomer Elastomer None MB-CDT Dual Split Elastomer Metal Optional, Continuous
6 Western Hemisphere Cameron PO Box 1212 Houston Texas Tel Fax Eastern Hemisphere Cooper Cameron (U.K.) Ltd. 5 Mondial Way Harlington Hayes, UB3 5AR England Tel Fax Asia Pacific/Middle East Cooper Cameron (Singapore) Pte. Ltd. No. 2 Gul Circle, Jurong ndustrial Est Locked Bag Service No. 3 Jurong Town Post Office Singapore 2262 Republic Of Singapore Tel Fax Cameron and Trulok are trademarks of the Cooper Cameron Corporation Cooper Cameron Corporation, Cameron Division, Printed in USA, 2/98, TG/3M, WR6576/TC1262
5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
More informationDB Bridge Plug. Features. Benefits. Applications
DB Bridge Plug The WELLFIRST Premium Cast Iron Bridge Plug designed to run on electric line. Rated between 2000-10000-psi differential, and 300 F from above and below. Features Field Proven Design Constructed
More informationInstruction Manual Updated 7/26/2011 Ver. 2.2
4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationPIONEER OIL TOOLS LIMITED
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, UK. DD113RD Tel: +44 (0)1241 877776 Fax: +44 (0)1241 871037 Email: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
More informationEngineered solutions for complex pressure situations
SPECIAL SERVICES Engineered solutions for complex pressure situations Cudd Energy Services (CES) delivers custom engineered solutions to resolve complex pressure situations resulting from equipment failure
More informationModel A Sleeve Valve Cement Retainer
Ret. O.D. Model A Sleeve Valve Cement Retainer DIMENSIONAL DATA A B C D E F G H J K L M N P Q R 3.593 3.593 3.500 2.500 3.531 3.531 1.345 3.375.750.437 2.437 2.187 7.062 2.437 5.312 11.685 20.093 3.937
More informationFLANGES, TEES AND CROSSES, SPOOLS AND ADAPTERS. Sara Sae
FLANGES, TEES AND CROSSES, SPOOLS AND ADAPTERS Sara Sae Quality and Innovation Products Catalog Spools and Adapters Sara manufactures a wide range of Spools and Adapter Flanges conforming to API-16 A and
More informationCasing Design. Casing Design. By Dr. Khaled El-shreef
Casing Design By Dr. Khaled El-shreef 1 Casing Design CONTENTS Function of Casing Casing Types & Tools Strength Properties Casing Specification Casing Design 2 1 RUNNING AND CEMENTING CASING Reasons for
More informationOffshore Managed Pressure Drilling Experiences in Asia Pacific. SPE paper
Offshore Managed Pressure Drilling Experiences in Asia Pacific SPE paper 119875 Authors: Steve Nas, Shaun Toralde, Chad Wuest, SPE, Weatherford Solutions Sdn Bhd, SPE, Weatherford Indonesia SPE, Weatherford
More informationTHE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
More informationSubsea Safety Systems
Subsea Safety Systems The ELSA-HP has been developed to service the high pressure horizontal tree completion and intervention market. With systems designed and qualified up to 15,000 psi, 250 degf and
More informationIRP 5 : Minimum Wellhead Requirements An Industry Recommended Practice (IRP) for the Canadian Oil and Gas Industry
5 : Minimum Wellhead Requirements An Industry Recommended Practice () for the Canadian Oil and Gas Industry EDITION: 3 SANCTION DATE: June 20, 2018 Copyright/Right to Reproduce Copyright for this Industry
More informationThe topics I will briefly cover, are; Stack Configurations Wellhead Connector Considerations Control Systems Tensioning Systems will be discussed by
Thank you Greg. 1 The topics I will briefly cover, are; Stack Configurations Wellhead Connector Considerations Control Systems Tensioning Systems will be discussed by Mr. Muhammad Sadiq, however in short,
More informationSuperior Hydraulic Fishing Jar. Manual D420
Superior Hydraulic Fishing Jar Manual D420 Contents Logan Superior Hydraulic Fishing Jar General Decsription...2 Application...2 Fishing, Milling, and Washover...2 Formation Testing...2 Coring...2 Rig
More informationMeter, PD Series H8-S1, S3, S5, S6, & S7 Parts List
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationOn-Off Connector Skirt
On-Off Connector Skirt Retrievable Packers & Accessories The On-Off Connector Skirt is compact, reliable, fully sealing, J-type tubing disconnect device that automatically engages and releases with a small
More informationMUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2
operating Instructions manual MUELLER GAS TAble of contents PAGE No-Blo Operations Using D-5 General Information 2 Installing No-Blo Service Tees, Service Stop Tees and Curb Stop Tees 3-8 Reconditioning
More informationCasing! 07 An Overview!
Casing! 07 An Overview! Introduction to Well Engineering - 07 - Casing 1 Contents 1. Introduction 4 2. Component Parts Of A Casing 7 3. Casing Terminology 8 3.1 Conductor Casing (30" O.D.) 9 3.2 Surface
More informationVAM 21 VAM TOP HT VAM FJL VAM HTF DINO VAM VAM HW ST VAM MUST
No gamble with the royal flush VAM 21 VAM TOP VAM TOP HC VAM TOP HT VAM SLIJ II VAM FJL VAM HTF DINO VAM BIG OMEGA TM VAM TOP FE VAM HW ST VAM MUST External seal geometry Thread form Ø 2 3/8 to 11 7/8
More informationInstallation Instructions
Installation Instructions Durametallic MD-200 Series Gas Dual Cartridge Canister Seal for Mixers and Agitators Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment
More informationIndependent Wellhead Products
New Products Poster Independent Wellhead Products Weir Independent Line Offers Comprehensive 1500 psi stack-up 3000 psi stack-up 5000 psi stack-up with dual ram BOP High-temp applications available 10K
More informationIRP 5 : Minimum Wellhead Requirements An Industry Recommended Practice (IRP) for the Canadian Oil and Gas Industry Volume
5 : Minimum Wellhead Requirements An Industry Recommended Practice () for the Canadian Oil and Gas Industry Volume 5 2018 EDITION: 3 SANCTION DATE: INSERT DATE HERE Copyright/Right to Reproduce Copyright
More informationSpecial Note: Single Pawl Spacer is required when using a Ratchet Pawl Assembly.
Line Overview The automatic spring-fed knives feature of this tool prevents excessive strain from being applied from the rig floor that could cause the knives to burn or break before the cut is completed.
More informationPROPOSED NEW SUB- CODE 1 RIG UP AND TEAR. Possibly Fits into Existing Code. 7/26/2018 Review PROPOSED NEW CODE EXISTING OPERATION
NW NW 1 RIG UP AND TAR 1 no sub-code RIG UP AND TAR DOWN Start: Rig released from previous well, nd: Rig fully rigged up, acceptance tests successfully completed, and signed off. DOWN 1 1 Rig Under Tow
More informationOCEAN DRILLING PROGRAM
BIH OCEAN DRILLING PROGRAM www.oceandrilling.org Scientifi c Application Packers A packer is an inflatable rubber element that inflates to seal the annular space between the drill string and the borehole
More informationW I L D W E L L C O N T R O L SNUBBING OPERATIONS
SNUBBING OPERATIONS Snubbing Operations Learning Objectives You will learn - Various activities suitable for snubbing operations. Best practices and techniques for conducting snubbing operations. The types
More informationDIVERLESS SUBSEA HOT TAPPING OF PRODUCTION PIPELINES
DIVERLESS SUBSEA HOT TAPPING OF PRODUCTION PIPELINES Dale Calkins Senior Project Engineer, TD Williamson Inc Biography Dale Calkins joined TD Williamson Inc in November of 1999 after working as a consulting
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationHydro-Mech Bridge Plug
Manual No: 0620000303 Revision: F Approved By: Quality Engineer Date: 2014-9-9 Hydro-Mech Bridge Plug DESCRIPTION: Map Hydro-Mech Bridge Plug is hydraulically actuated and mechanically set. Compact, with
More informationRetrievable Bridge Plugs
Retrievable Bridge Plugs & Associated Equipment Well Intervention omega-completion.com Our Philosophy High performance and integrity The Omega range of Retrievable Bridge Plugs and our accompanying suite
More informationNorth American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug
North American sealing solutions Bridge Plug Ball Drop Frac Plug Caged Ball Frac Plug The North American Sealing Solutions composite bridge plug, caged ball and ball drop (flow thru) frac plug provide
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationINTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96)
BOP CLASSIFICATION SYSTEM FOR ONSHORE NEWFOUNDLAND AND LABRADOR INTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96) PREPARED BY THE PETROLEUM RESOURCE DEVELOPMENT DIVISION
More informationA LIFE OF THE WELL ARTIFICIAL LIFT STRATEGY FOR UNCONVENTIONAL WELLS
A LIFE OF THE WELL ARTIFICIAL LIFT STRATEGY FOR UNCONVENTIONAL WELLS Jay Miller Sales Manager Production Lift Companies Inc. Artificial Lift & Production Congress January 29, 2019 Unconventional Wells
More informationAbandonment Program for Paramount Fort Liard F 36
Abandonment Program for Paramount Fort Liard F 36 Well Name: Paramount et al Liard F 36 Area: 60 0 10 N, 123 0 15 W Location: Latitude: 60 0 05 27 Longitude: 123 0 22 00 UWI: 300F366010123150 WID: 1841
More informationWELL SCAVENGER. Versatile wellbore clean-up tool for the most demanding operations
WELL SCAVENGER Versatile wellbore clean-up tool for the most demanding operations WELL SCAVENGER: A versatile wellbore cleanup tool for flowrestricted applications The inability to recover wellbore debris
More informationForm No. P Meter, PD Series H8-S3 Flat Plate Cover Parts List
Form No. P0550.50 Meter, PD Series H8-S3 Flat Plate Cover Parts List Issue/Rev. 0.0 (10/04) Bulletin P0550.50 The Most Trusted Name In Measurement Inner Mechanism Page P0550.50 Issue/Rev. 0.0 (10/04) Item
More informationCase History. North Sea Platform Wellhead Isolation Tubing Hanger Body Seals Locking Device 20-3/4 x 13-3/8 Mandrel Neck Seal
Case History North Sea Platform Wellhead Isolation Tubing Hanger Body Seals Locking Device 20-3/4 x 13-3/8 Mandrel Neck Seal History / Introduction: Failed test issues as reported in 2001(SBMS-II, S Seal)
More informationAssembly Drawing: W-311B-A01, or as applicable Parts List: W-311B-A01-1, or as applicable Special Tools: , , &
REDQ Regulators Model 411B Barstock Design Powreactor Dome Regulator OPERATION AND MAINTENANCE Contents Scope..............................1 Installation..........................1 General Description....................1
More informationSPE Coiled Tubing in High-pressure Wells. Well Control Considerations. Introduction
Society of Petroleum Engineers SPE 24793 Coiled Tubing in High-pressure Wells K.R. Newman and M.G. Allcorn, Dowel1 Schlumberger SPE Members Copyright 1992, Society of Petroleum Engineers Inc. This paper
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More informationNORSOK standard D-010 Rev. 3, August 2004
7 COMPLETION ACTIVITIES... 3 7.1 GENERAL... 3 7.2 WELL BARRIER SCHEMATICS... 3 7.3 WELL BARRIER ACCEPTANCE CRITERIA... 3 7.4 WELL BARRIER ELEMENTS ACCEPTANCE CRITERIA... 5 7.5 WELL CONTROL ACTION PROCEDURES
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationW I L D W E L L C O N T R O L COMPLETIONS AND WORKOVERS
COMPLETIONS AND WORKOVERS Completions & Workovers Learning Objectives You will learn - The reasons why a well needs to be worked over. The benefits derived from working a well over. To prepare a well completion.
More informationSCORPION HIGH-QUALITY, FULLY COMPOSITE PLUGS
SCORPION HIGH-QUALITY, FULLY COMPOSITE PLUGS A DIFFERENT KIND OF ENERGY COMPANY Nine Energy Service isn t your typical oilfield services company. Our success stems from a culture driven by performance
More informationBridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation
Bridge Plugs, Ball Drop & Caged Ball Plugs For Zone Isolation ADVANTAGE composite bridge plug, caged ball and ball drop (flow thru) frac plug provide a means to isolate multiple zones during high pressure
More informationIWCF Equipment Sample Questions (Combination of Surface and Subsea Stack)
IWCF Equipment Sample Questions (Combination of Surface and Subsea Stack) 1. Given the volumes below, how much hydraulic fluid will be required to carry out the following operations (no safety margin)?
More informationThe industry reference for premium connections
The industry reference for premium connections VAM 21 VAM TOP VAM TOP HC VAM TOP HT VAM SLIJ II VAM FJL VAM HTF VAM SG DINO VAM BIG OMEGA TM VAM TOP FE VAM HW ST VAM MUST Vanishing threads Thread form
More informationMarine Technology Society
Marine Technology Society Dynamic Positioning Conference 21-22 October, 1997 Session I Review of DP Applications, Consequences and Cost of Failures Drilling Fundamentals-DP Operations-Drilling with Riser
More informationGas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
More informationNHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed
More informationErsatzteilliste. Düsenwagen R 30
Ersatzteilliste Düsenwagen R 30 Beinlich Agrarpumpen und maschinen GmbH Eifel-Maar-Park 16 D 56766 Ulmen Tel.: 02676 9516-0 - Fax: 02676 951615 www.beinlich-beregnung.de info@beinlich-beregnung.de Beinlich
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationT e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers
More informationHAYWARD FLOW CONTROL FLV SERIES, PVC/CPVC FILTER VESSEL INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
HAYWARD FLOW CONTROL FLV SERIES, PVC/CPVC FILTER VESSEL INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Pg. 1of 15 PLEASE READ THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING ANY HAYWARD PRODUCT.
More informationGM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
More informationSuccess Paths: A Risk Informed Approach to Oil & Gas Well Control
API Winter E&P Standards Conference, Austin January 18, 2017 Success Paths: A Risk Informed Approach to Oil & Gas Well Control Dr. Dan Fraser Director, Strategic Alliances for Global Energy Solutions,
More informationRestoring Fluid Flow in Tubing Strings
Restoring Fluid Flow in Tubing Strings Andrew Roth, Product Manager Fike Corporation Fike Hydraulic Tubing Drains (HTD) for use with deep hole drilling tools, downhole devices and other oil and off shore
More informationFLOAT EQUIPMENT AND CASING ACCESSORIES
FLOAT EQUIPMENT AND CASING ACCESSORIES CONTENTS INTRODUCTION... 2 FLOAT EQUIPMENT... 4 Standard Valve... 4 Differential Valve... 5 SPECIALITY FLOAT EQUIPMENT Double Valve Float Shoes... 6 Float Equipment
More informationTYPE ECS SEAL METAL BELLOWS DRY-RUNNING SECONDARY CONTAINMENT Technical Specification
Low Temperature Design A Spacer Ring B Compression Ring C Retaining Ring D Wave Spring E O-ring F ent/drain Connection G Seat/Mating Ring H Insert I Bellows Assembly J Housing A K Spacer B F G H I C D
More informationDeepwater Horizon Incident Internal Investigation
Not all Information has been verified or corroborated. Subject to review based on additional information or analysis. Deepwater Horizon Incident Internal Investigation 1 Areas of Discussion Investigation
More informationSmith Meter PD Meter Meter, PD Series, F4 S6, S7. Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13)
Smith Meter PD Meter Meter, PD Series, F4 S6, S7 Parts List Bulletin PO01012 Issue/Rev 0.0 (7/13) 17 34 71 71 19 33 21 71 58 35 68 25 26 10 44 60 59 61 24 55 54 57 16 14 29 36 28 42 70 48 27 41 32 6 47
More informationFlexible Engineered Solutions International CALM Buoy Swivels
Flexible Engineered Solutions International CALM Buoy Swivels Merchant Court, North Seaton Industrial Estate, Ashington, Northumberland, NE63 0YH, England Telephone: +44 (0) 1670 524 960 I Fax: +44 (0)
More informationBulletin /06/2012 Supersedes 10/23/00. Installation of John Crane Type 73 Inflatable Mechanical Seal. Page 01 of 10
01 of 10 1. Carefully read all instructions and notes before installation. 2. Bench Pre-assembly: a. Insert the support ring (item #1) inside the inflatable boot (item #2) to form inflatable seal assembly
More informationINSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals
INSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals A. Description of Seal Assembly B. Installation C. Piping D. Testing for undocking E. Installation check seat F. Operation G. Sealing
More informationWHEATLEY Series 500 Swing Check Valve
Document Number: TC003001-13 Revision: 02 WHEATLEY Series 500 Swing Check Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS...3 SCOPE...5 INSTALLATION AND OPERATION
More informationIWCF Equipment Sample Questions (Surface Stack)
IWCF Equipment Sample Questions (Surface Stack) 1. During a well control operation 4000 psi was shut in below the middle pipe rams. Ram type BOP data: Model: Cameron U type Rated Working Pressure: 15000
More informationCATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
More informationRPSEA UDW Forum June 22 & 23, Secure Energy for America
RPSEA UDW Forum June 22 & 23, 2010 Secure Energy for America PROJECT TEAM RPSEA Operator Advisory Committee Anadarko Chevron Shell ConocoPhillips Subcontractors IntecSea NOV CTES General Marine Contractors
More informationDavorin Matanović DRILLING LINE (ROPE) AND BLOCKS
Davorin Matanović DRILLING LINE (ROPE) AND BLOCKS DRILLING LINE (ROPE) AND BLOCKS The term drilling line pertain to the wire rope made from steel wires. It is spooled onto the drum of the draw works hoist,
More informationMeter, PD Model T-11 and T-11NF Parts List
Form No. P0565.11 Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P0565.11 The Most Trusted Name In Measurement Item G Description Calibrator Version Qty. Part Number Item Description
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationGROUTEC SCOTT VICKERS. Grouting Equipment
GROUTEC SCOTT VICKERS Grouting Equipment SCOTT VICKERS manufacturers a range of cement and chemical grouting equipment including:- PUMPS - The Cement Grout Pumps are all diaphragm-type. These diaphragms,
More informationFilter Housings. Universal & Compact Multi-Chamber Filter Housings
Filter Housings engineer approved Universal & Compact Multi-Chamber Filter Housings White Knight dual- and quad-chamber filter housings fit standard filter cartridges offered by major suppliers. They provide
More informationKTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
More informationSolid Expandable Tubular Technology: The Value of Planned Installation vs. Contingency
Solid Expandable Tubular Technology: The Value of Planned Installation vs. Contingency Chris Carstens Unocal Corporation 14141 Southwest Freeway Sugar Land, Texas 77478 Mike Breaux Unocal Corporation 14141
More informationWeatherford Inverse Gas Lift System (IGLS)
36 th Gas-Lift Workshop Stavanger, Norway February 4 8, 2013 Weatherford Inverse Gas Lift System (IGLS) Jerry Sutton Senior Applications Engineer 2013 Gas-Lift Workshop Contents Why is IGLS needed? What
More informationCost-efficient polymer solutions
Cost-efficient polymer solutions 1 QUALITY PRODUCTS AROUND THE WORLD We produce and deliver quality products for the offshore market. Through years of close collaboration with the market we have developed
More informationField Loading Procedures Casing Cutters
JRC Explosive Jet Cutters with Aluminum and/or Steel Housings 3.625 Inch (92.1 mm) to 8.188 (208.0 mm) O.D. for Casing and Tubing 4 1/2 (4.500) Inch (114.3 mm) to 9 5/8 (9.625) Inch (244.5 mm) O.D. Field
More informationNo gamble with the royal flush
No gamble with the royal flush VAM 21 VAM TOP VAM TOP HC VAM TOP HT VAM SLIJ II VAM FJL VAM HTF VAM SG DINO VAM BIG OMEGA TM VAM TOP FE VAM HW ST VAM MUST External seal geometry Thread form Ø 2 3/8 to
More informationABS DWV FITTINGS BOW INDUSTRIAL CORPORATION
JANUARY 31, 2011 SUPERCEDES ABS-0111 ASTM D2661 BOW INDUSTRIAL CORPORATION CHAMPLAIN, NY USA TEL: 800.852.8527 info@bow-group.com FAX: 800.526.5668 www.bow-group.com JANUARY 31, 2011 Page 1 COUPLING (Hub
More informationOPERATING MANUAL DOUBLE ACTING DRILLING INTENSIFIER HYDRAULIC TYPE
Page 1 of 8 OPERATING MANUAL DOUBLE ACTING DRILLING INTENSIFIER HYDRAULIC TYPE Size Series 6.50" 478 Reviewed And Approved By: Signature: Initials: Date: Page 2 of 8 Section OPERATING MANUAL DOUBLE ACTING
More informationwith self-sealing gas valve system
with self-sealing gas valve system R DUCTILE PVC POLSAFE GAS DISTRIBUTION SYSTEM INTRODUCTION POLSAFE is a programme of fittings for low pressure gas distribution systems. POLSAFE is designed for 25 up
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationKey No. Description Part No.
ENGINE ASSEMBLY 45 319042 10 (SEE ENGINE MANUAL) ENGINE 12 SCREW, 5/16 18 710024 13 WASHER 120638 41 GUIDE, ROD BELT 3949 42 PLASTIC WASHER 6711 43 WASHER 120638 44 SCREW, 5/16 24X 1.00 910828 45 SPACER
More informationRANGER PROP BUILDING INSTRUCTIONS & PHOTOS
RANGER PROP BUILDING INSTRUCTIONS & PHOTOS Science under the ice Ice sheet At the international competition, the science under the ice product demonstration will take place under an actual sheet of ice.
More informationInstallation restrictions for length of sections should also be noted.
Since 1966 CHART (formerly MVE) has specialized in the design and fabrication of custom cryogenic piping for liquid nitrogen, oxygen, argon, helium, and hydrogen in pipe sizes ranging from 1/4" through
More informationASSEMBLY INSTRUCTIONS
XR 9-2009:new odc 1018 revised 2/17/10 9:11 AM Page 1 ODC XR 9 OUTDOOR DISCOVERY CRAFT ASSEMBLY INSTRUCTIONS Your ODC XR 9 Pontoon Boat comes in two separate cartons consisting of the following parts:
More informationSHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 9 1. SCOPE: 1.1. This provides the minimum design, port preparation and installation and removal requirements for SLAS4383-XX-XX, SLF2002-XX-XX and SLF3004-XX-XX adapter reducer and is applicable
More informationMeter, PD Series, E3 S6, S7 All Parts List
Issue/Rev. 0.0 (3/13) Meter, PD Series, E3 S6, S7 All Parts List Bulletin PO01005 32 68 29 17 68 16 14 19 15 68 20 54 22 18 24 58 23 10 59 41 31 56 55 57 47 52 25 27 34 34 26 40 67 44 39 The Most Trusted
More informationSpring steel fasteners KWHS-14R. KwikWire. Hanging system
Spring steel fasteners KWHS-14R KwikWire Hanging system KwikWire Hanging System Takes the strain out of hanging with chain The KwikWire Hanging System is a flexible replacement for jack chain and all thread
More informationKAYDON RING & SEAL, INC.
KAYDON RING & SEAL, INC. K-DGS Series Dry Gas Seals KAYDON K-DGS Dry Gas Seals K-DGS Configurations Single Seal (K-DGS) Compact and economical, the single seal configuration is recommended for non-toxic
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Probe Instrument Regulator Model The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for
More informationSHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 11 1. SCOPE: 1.1. This provides the minimum design, port preparation, and installation and removal requirements for SLAS5103 plugs and is applicable when specified on engineering drawings. These
More informationB-LINE SERIES. Spring steel fasteners KWHS-15. KwikWire. Hanging system
Spring steel fasteners KWHS-5 B-LINE SERIES KwikWire Hanging system KwikWire hanging system. Takes the strain out of hanging with chain Application Photos Applications for the KwikWire Hanging System include:
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More information