Kirra Entertainment Unit Assembly Instructions

Size: px

Start display at page:

Download "Kirra Entertainment Unit Assembly Instructions"

Oswin Doyle
5 years ago
Views:

1 irra ntertainment Unit Thank you for your purchase. lease follow the instructions below for correct assembly. dowel x x 0 wedge x C bolt x locking nut x x F G slide x rail long x N wheel slide rail H I slide slide rail rail O wheel small bolt x0 small locking nut x0 V W X Y Z safety strap x x wall anchor x wall x washer Wall Strap Hardware Supplied WRNING: ny furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. ccordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. hillips & Flathead drivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting.

2 irra ntertainment Unit C F F F CR G G G ttach x slide rails (F) to panel [] and secure with x small s (). ttach x slide rails (G) to panel [] and secure with x small s (). Tighten with a driver. Insert x dowels () to panel []. Insert x bolts (C) into panel []. Tighten with a driver.

3 irra ntertainment Unit ttach panels [], [] and [] to panel [] and secure with x locking nuts (). Tighten with a driver. Slide panels [] between the grooves of panels [], [] and [] to form the back of the unit, as shown.

4 irra ntertainment Unit Insert x dowels () into the ends of panels [], [] and []. ttach panel [5] to the unit and secure with x s (). Tighten with a driver. ttach the legs [] and [9] to panel [5] as shown using 0x (). Tighten with a driver.

5 irra ntertainment Unit Insert 5x small bolts () and x dowel ().to panel [0].Tighten with a driver. 0 ttach panels [],[]and [5] to panel [0] and secure with 5x small locking nuts (). Tighten with a driver. 5

6 irra ntertainment Unit Slide panel [] down along the grooves of panels [] and []. ttach panel [], [] and [] as shown using x s (). Tighten with a driver.

7 irra ntertainment Unit I 0 H 0 ttach slide rails (I) and slide rails (H) to the underside of the side panels as shown. Secure with x s () and tighten with a driver. Insert the assembled drawers into the corresponding compartments as shown. nsure the drawers slide easily along the rails. 7

8 irra ntertainment Unit N O N 7 7 back O Note: If the door is not sliding smoothly or sitting straight, there is a in the middle of the wheel on the bottom of each door that can be tightened/loosened until the door is sitting properly. ttach x wheels (O) and (N) to panel [7] as shown, and secure with x s (). Tighten with a driver. O ttach door panel [7] as shown, starting with the back door first and then the front door. ress the clip down on the back of the door to assemble the door. ush the clip back up to lock into place.

9 irra ntertainment Unit 5 X Z Y V Z W ttach x wedges () into the corners of the back of the unit and secure with x s (). Tighten with a driver.ttach x safety strap (V) to the top of the back side of the unit as shown using x washer (Z) and x (W). Tighten with a driver. Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (V). Fasten to wall using x washer (Z), x wall plug (X) and x (Y). nsure unit is balanced and steady before use. You re done, enjoy! 9

A-FRAME RESIN IN & OUT FLIP UP LADDER

A-FRAME RESIN IN & OUT FLIP UP LADDER NE1222 NOTE FOR SAFETY PURPOSES ALL LADDERS SHOULD BE SECURED BY ATTACHING THEM TO THE TOP LEDGE OF THE POOL. (See step 13 for details) In order for the ladder to