M315D Wheel Excavator

Size: px

Start display at page:

Download "M315D Wheel Excavator"

Magnus Gaines
6 years ago
Views:

1 M315D Wheel Excavator Diensions All diensions are approxiate VA Boo One-Piece Boo Offset Boo Length 1 Shipping Height 2 Shipping Length Support Point Tail Swing Radius Counterweight Clearance Cab Height Overall Machine Width ** Maxiu tire clearance with outrigger fully down Roading position with stick ** Undercarriage with dozer only Undercarriage with 2 sets of outriggers Undercarriage with 1 set of outriggers and dozer

2 Working Ranges VA Boo One-Piece Boo Offset Boo Length 1 Digging Height Dup Height Digging Depth Vertical Wall Digging Depth Depth 2.5 Straight Clean-Up Reach Reach at Ground Level Bucket Forces (ISO 6015) kn Forces (ISO 6015) kn Values 1-7 are calculated with bucket and quick coupler with a tip radius of Breakout force values are calculated with heavy lift on (no quick coupler) and a tip radius of 1405.

3 Bucket Specifications Contact your Cat dealer for special bucket requireents. Variable Adjustable Boo One-Piece Boo Pin-On Buckets Length Width Weight* Capacity (ISO) kg 3 Adapters Excavation Extree Excavation Excavation (leveling) Extree Excavation (leveling) Ditch Cleaning Tiltable Ditch Cleaning * Bucket weight includes Ground Engaging Tools Maxiu aterial density 1800 kg/ 3 Maxiu aterial density 1500 kg/ 3 Maxiu aterial density 1200 kg/ 3 Not recoended

4 Bucket Specifications Contact your Cat dealer for special bucket requireents. Variable Adjustable Boo One-Piece Boo CW Quick Coupler Buckets Length Width Weight* Capacity (ISO) kg 3 Adapters Excavation Extree Excavation Excavation (leveling) Extree Excavation (leveling) Ditch Cleaning Tiltable Ditch Cleaning * Bucket weight includes Ground Engaging Tools Maxiu aterial density 1800 kg/ 3 Maxiu aterial density 1500 kg/ 3 Maxiu aterial density 1200 kg/ 3 Not recoended

5 Work Tools Matching Guide When choosing between various work tool odels that can be installed onto the sae achine configuration, consider work tool application, productivity requireents, and durability. Refer to work tool specifications for application recoendations and productivity inforation. Variable Adjustable Boo One-Piece Boo Offset Boo (1) (2) (3) (1) (2) (3) (1) (2) (3) Without Quick Coupler Length () Haers H100, H100 S H115 S, H120C S MP15 CC, CR Multiprocessors MP15 MP15 PP PS MP15 S Crusher P315 Hydraulic Shears (* boo ounted) S320B S320B* S325B* G310B D, R Multi-Grapples G315B D R Hydraulic Pulverizer P215 Copactor CVP GSH15B 5 tines Orange Peel Grapples GSH15B 4 tines With Quick Coupler (CW-20, CW-20S) Haers Multiprocessors Multi-Grapples Hydraulic Pulverizer Copactor H100, H100 S H115 S, H120C S MP15 CC, CR, PS MP15 S G310B D G310B R G315B D, R P215 CVP Working Range Maxiu aterial density 3000 kg/ 3 Over the front only Maxiu aterial density 1800 kg/ 3 Maxiu aterial density 1200 kg/ 3

6 Lift Capacities Variable Adjustable Boo (5200 ) All values are in kg, without bucket and without QC, with counterweight (3900 kg), heavy lift on. Load at axiu reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height Short Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5700 *5700 * *3950 * sets of stabilizers down *5700 *5700 *5700 *5000 *5000 *5000 *3950 *3950 *3950 Rear dozer up * Rear dozer down * * * Dozer and stabilizer down *6350 *6350 * * sets of stabilizers down *6350 *6350 *6350 *5100 *5100 *5100 *3650 *3650 *3650 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7350 *7350 *7350 *5450 * *3600 * Rear dozer up Rear dozer down * * * * Dozer and stabilizer down * * * * sets of stabilizers down *8000 * *5800 * *4300 * *3750 * Rear dozer up Rear dozer down * *5700 * Dozer and stabilizer down * * * sets of stabilizers down *7750 * *5700 * *4100 * Rear dozer up * Rear dozer down *7150 *7150 * *4950 * Dozer and stabilizer down *7150 *7150 * * * sets of stabilizers down *7150 *7150 *7150 *6750 *6750 *6750 *4950 * *3900 *3900 *3900 Rear dozer up * Rear dozer down * Dozer and stabilizer down *4800 * sets of stabilizers down *4800 *4800 * Mediu Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5400 *5400 * *3300 * sets of stabilizers down *5400 *5400 *5400 *4900 *4900 *4900 *3300 *3300 *3300 Rear dozer up * Rear dozer down * * * Dozer and stabilizer down *6050 *6050 * *3100 * sets of stabilizers down *6050 *6050 *6050 *5000 *5000 *5000 *3100 *3100 *3100 Rear dozer up Rear dozer down * * * * Dozer and stabilizer down * * * * sets of stabilizers down *7100 *7100 *7100 *5300 * *4300 * *3100 *3100 *3100 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7900 * *5750 * * *3250 *3250 *3250 Rear dozer up Rear dozer down * *5700 * * Dozer and stabilizer down * * * * sets of stabilizers down *7850 * *5700 * *4250 * *3550 * Rear dozer up * Rear dozer down *7100 *7100 * *5150 *3800 Dozer and stabilizer down *7100 *7100 * * * sets of stabilizers down *7100 *7100 *7100 *7000 *7000 *7000 *5150 * *3800 * Rear dozer up * * Rear dozer down * * Dozer and stabilizer down *5250 *5250 *3400 * sets of stabilizers down *5250 *5250 *5250 *3400 *3400 * * Liited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot ounting pin on the stick. The oscillating axle ust be locked. Lifting capacities are based on the achine standing on a fir unifor supporting surface and the Variable Boo Cylinder adjusted to the axiu length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted fro above values. The use of a work tool attachent point to handle/lift objects, could affect the achine lift perforance. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation.

7 Lift Capacities Variable Adjustable Boo (5200 ) All values are in kg, without bucket and without QC, with counterweight (3900 kg), heavy lift on. Load at axiu reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height Long Rear dozer up * * Rear dozer down *4950 *4950 * * Dozer and stabilizer down *4950 *4950 * *3000 * sets of stabilizers down *4950 *4950 *4950 *4750 *4750 *4750 *3000 *3000 *3000 Rear dozer up * * * Rear dozer down * * * * Dozer and stabilizer down *5800 *5800 * *2850 *2850 *2850 * sets of stabilizers down *5800 *5800 *5800 *4900 *4900 *4900 *2850 *2850 *2850 *2850 *2850 *2850 Rear dozer up Rear dozer down * * * * Dozer and stabilizer down * * * * sets of stabilizers down *6950 *6950 *6950 *5200 * *4200 * *2850 *2850 *2850 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7800 * *5700 * *4400 * *2950 *2950 *2950 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7900 * *5750 * *4350 * *3200 *3200 *3200 Rear dozer up *6850 * Rear dozer down *6850 *6850 * *5250 * Dozer and stabilizer down *6850 *6850 * * * sets of stabilizers down *6850 *6850 *6850 *7150 *7150 *7150 *5250 * *3750 * Rear dozer up * * Rear dozer down * *3850 * Dozer and stabilizer down *5550 *5550 *3850 *3850 *3200 * sets of stabilizers down *5550 *5550 *5550 *3850 *3850 *3850 *3200 *3200 * * Liited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot ounting pin on the stick. The oscillating axle ust be locked. Lifting capacities are based on the achine standing on a fir unifor supporting surface and the Variable Boo Cylinder adjusted to the axiu length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted fro above values. The use of a work tool attachent point to handle/lift objects, could affect the achine lift perforance. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation.

8 Lift Capacities One-Piece Boo (5050 ) All values are in kg, without bucket and without QC, with counterweight (3900 kg), heavy lift on. Load at axiu reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height Short Rear dozer up * Rear dozer down * Dozer and stabilizer down *3850 * sets of stabilizers down *3850 *3850 *3850 Rear dozer up * Rear dozer down * * * Dozer and stabilizer down *6050 *6050 * *3600 * sets of stabilizers down *6050 *6050 *6050 *5100 *5100 *5100 *3600 *3600 *3600 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7150 *7150 *7150 *5500 * *3600 *3600 *3600 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *8000 * *5850 * *3800 * Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *8050 * *5850 * *4250 * Rear dozer up * Rear dozer down * * * *4450 Dozer and stabilizer down *8750 *8750 * * * sets of stabilizers down *8750 *8750 *8750 *7250 *7250 *7250 *5250 * *4450 * Rear dozer up *7100 * * * Rear dozer down *7100 *7100 * * Dozer and stabilizer down *7100 *7100 *5400 *5400 *3900 * sets of stabilizers down *7100 *7100 *7100 *5400 *5400 *5400 *3900 *3900 * Mediu Rear dozer up * Rear dozer down * * Dozer and stabilizer down *4300 *4300 *3250 * sets of stabilizers down *4300 *4300 *4300 *3250 *3250 *3250 Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5700 *5700 * *3100 * sets of stabilizers down *5700 *5700 *5700 *4900 *4900 *4900 *3100 *3100 *3100 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *6900 *6900 *6900 *5350 * *3100 *3100 *3100 Rear dozer up Rear dozer down * * * * Dozer and stabilizer down * * * * sets of stabilizers down *7850 * *5750 * *4150 * *3300 *3300 *3300 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *8050 * *5850 * *3650 * Rear dozer up * Rear dozer down * * * * Dozer and stabilizer down *8500 *8500 * * * sets of stabilizers down *8500 *8500 *8500 *7450 * *5400 * *4350 * Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *7900 *7900 *5850 *5850 *3950 * sets of stabilizers down *7900 *7900 *7900 *5850 *5850 *5850 *3950 *3950 * * Liited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot ounting pin on the stick. The oscillating axle ust be locked. Lifting capacities are based on the achine standing on a fir unifor supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted fro above values. The use of a work tool attachent point to handle/lift objects, could affect the achine lift perforance. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation.

9 Lift Capacities One-Piece Boo (5050 ) All values are in kg, without bucket and without QC, with counterweight (3900 kg), heavy lift on. Load at axiu reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height Long Rear dozer up * Rear dozer down * * Dozer and stabilizer down *4350 *4350 *2950 * sets of stabilizers down *4350 *4350 *4350 *2950 *2950 *2950 Rear dozer up * Rear dozer down * * Dozer and stabilizer down * *2800 * sets of stabilizers down *4800 *4800 *4800 *2800 *2800 *2800 Rear dozer up Rear dozer down * * * * Dozer and stabilizer down *6700 *6700 * * *2850 * sets of stabilizers down *6700 *6700 *6700 *5250 * *3900 * *2850 *2850 *2850 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7750 * *5700 * * *3000 *3000 *3000 Rear dozer up *4400 *4400 * Rear dozer down *4400 *4400 * * * * Dozer and stabilizer down *4400 *4400 * * * * sets of stabilizers down *4400 *4400 *4400 *8100 * *5850 * *4050 * *3300 *3300 *3300 Rear dozer up * Rear dozer down * * *5500 * Dozer and stabilizer down *8150 *8150 * * * sets of stabilizers down *8150 *8150 *8150 *7600 * *5500 * *3950 * Rear dozer up * Rear dozer down * * * * Dozer and stabilizer down *8450 *8450 *6150 *6150 *4100 *4100 *3950 * sets of stabilizers down *8450 *8450 *8450 *6150 *6150 *6150 *4100 *4100 *4100 *3950 *3950 * * Liited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot ounting pin on the stick. The oscillating axle ust be locked. Lifting capacities are based on the achine standing on a fir unifor supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted fro above values. The use of a work tool attachent point to handle/lift objects, could affect the achine lift perforance. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation.

10 Lift Capacities Offset Boo (5200 ) All values are in kg, without bucket and without QC, with counterweight (3900 kg), heavy lift on. Load at axiu reach (sticknose/bucket pin) Load over front Load over rear Load over side Load point height Short Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5600 *5600 * *3550 * sets of stabilizers down *5600 *5600 *5600 *4900 *4900 *4900 *3550 *3550 *3550 Rear dozer up * Rear dozer down * * * Dozer and stabilizer down *6200 *6200 * *3250 * sets of stabilizers down *6200 *6200 *6200 *5000 *5000 *5000 *3250 *3250 *3250 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7100 *7100 *7100 *5300 * *3200 *3200 *3200 Rear dozer up Rear dozer down * *5600 * * Dozer and stabilizer down * * * * sets of stabilizers down *7650 * *5600 * *4150 * *3300 *3300 *3300 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7400 * *5450 * *3600 * Rear dozer up * Rear dozer down * * *4700 *3600 Dozer and stabilizer down *7350 *7350 * * * sets of stabilizers down *7350 *7350 *7350 *6400 *6400 *6400 *4700 * *3600 *3600 *3600 Rear dozer up * Rear dozer down * Dozer and stabilizer down *4500 * sets of stabilizers down *4500 *4500 * Mediu Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5300 *5300 * *3000 * sets of stabilizers down *5300 *5300 *5300 *4750 *4750 *4750 *3000 *3000 *3000 Rear dozer up * * Rear dozer down * * * Dozer and stabilizer down *5950 *5950 * *2800 * sets of stabilizers down *5950 *5950 *5950 *4850 *4850 *4850 *2800 *2800 *2800 Rear dozer up Rear dozer down * * * * Dozer and stabilizer down * * * *2750 * sets of stabilizers down *6900 *6900 *6900 *5150 * *4150 * *2750 *2750 *2750 Rear dozer up Rear dozer down * * * Dozer and stabilizer down * * * sets of stabilizers down *7600 * *5500 * *4300 * *2850 *2850 *2850 Rear dozer up Rear dozer down * *5450 * * Dozer and stabilizer down * * * * sets of stabilizers down *7500 * *5450 * *4050 * *3100 *3100 *3100 Rear dozer up * Rear dozer down * * *4900 * Dozer and stabilizer down *7250 *7250 * * * sets of stabilizers down *7250 *7250 *7250 *6650 *6650 *6650 *4900 * *3550 *3550 *3550 Rear dozer up * * Rear dozer down * * Dozer and stabilizer down *4950 *4950 *3200 * sets of stabilizers down *4950 *4950 *4950 *3200 *3200 * * Liited by hydraulic rather than tipping load. Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot ounting pin on the stick. The oscillating axle ust be locked. Lifting capacities are based on the achine standing on a fir unifor supporting surface and the Variable Boo Cylinder adjusted to the axiu length. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted fro above values. The use of a work tool attachent point to handle/lift objects, could affect the achine lift perforance. Always refer to the appropriate Operation and Maintenance Manual for specific product inforation.

420D/420D IT Backhoe Loader

420D/420D IT Backhoe Loader 0D/0D IT Backhoe Loader () () () () () () (0. m /. yd ) with Quick Coupler (.00 m /. yd ) (0. m /. yd ) (.0 m /. yd ) Overall transport length 0 mm/ ft in 0 mm/ ft in 0 mm/ ft 0 in 0 mm/ ft 0 in Overall