Product Guide -Electronic & Engineering Materials - Casting & Potting Compounds
|
|
|
- Cori Stephens
- 6 years ago
- Views:
Transcription
1 Product Guide -Electronic & Engineering Materials - Casting & Potting Compounds Segment End-Product/ Components Capacitor Potting Dobeckot 5601/ Hardener :12 Filled, Fire Retardant, Halogen free, RoHS Compliant, Rigid, EP Potting System, RT Elan-tron PU PH :16 Filled,Highly Flexible (Shore A -15 ), Polyurethane Casting Resin system, RT Shimocast 101 / Hardener IS :22 Filled, Flexible, PU Potting System,RT Shipal 81 FR / Hardener IS :16 Filled, Fire Retardant, Halogen free,rohs Compliant, Flexible, PU Potting System, RT Shipal 40 FR / Hardener IS :26 Filled, Fire Retardant, RoHS Compliant, Rigid,PU Potting System, RT Capacitor Coating Shimokote E 39 A(3) / Hardener E 39 B / Diluent M 100:30:30 Thixotropic, Long Pot Life, Liquid Dip Coating EP System, Heat Electronic protection Regulator / Rectifier Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Potting, RT Dobeckot 5601 / Hardener :12 Filled,Fire Retardant, Halogen free, RoHS Compliant, Rigid, EP Potting System,RT Shipal 30 B / Hardener IS :25 Filled, Highly Flexible,PU Potting System for Stress free Potting,RT Dobeckot 5503 / Hardener EH :25 Filled, Low viscosity, Rigid, EP Potting & Casting System,RT Dobefil 60 Black /Hardener EH :25 Filled, Rigid, EP Potting & Casting System,RT CDI Coil Elan-tron MC WH :25 Filled, Highly Flexible, Fire Retardant, Epoxy Resin System for Potting,Heat Potting, RT Shimokote 11 Black / Hardener :20 Filled, Highly Flexible, EP Potting System,RT Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Technical Information - Revision: 1, July
2 Flasher Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Dobeckot 5503 / Hardener EH :25 Filled, Low Viscosity, Rigid, EP Potting & Casting System,RT Dobeckot Hardener :12 Filled,Fire Retardant, Halogen free, RoHS Compliant, Rigid,EP Potting System,RT Dobefil 60 Black + Hardener EH :25 Filled, Rigid, EP Potting & Casting System,RT Elan-tron MC Elan-tron W ;16 Filled, Fire retardant, Halogen Free, RoHS Compliant, Epoxy Resin System for Potting, RT Pick Up Coil Elan-tron MC W :25 Filled, Rigid, EP Potting & Casting System,RT Dobeckot 5601 / Hardener :12 Filled,Fire Retardant, Halogen Free, RoHS Compliant, Rigid EP Potting System,RT Dobeckot 5503 / Hardener EH :25 Filled, Low viscosity, Rigid, EP Potting & Casting System,RT Dobefil 60 Black / Hardener EH :25 Filled, Rigid, EP Potting & Casting System,RT Sensor & Actuators Shimorez 402 M / Hardener :40 Unfilled, Semi Rigid, Clear EP System for Stress Free Potting,RT Shipal 30 B / Hardener IS :25 Filled, Highly Flexible, PU System for Stress Free Potting,RT Elan-tron PU 54 + PH :16 Filled, Fire Retardant, RoHS Compliant, RT curing, Polyurethane Resin System for Potting & Casting Safety Devices - Central Lock System Shimokote 10 / Hardener :18 Filled, Flexible, EP System for Stress Free Potting,RT Elan-tron PU 54 + PH :16 Filled, Fire Retardant, RoHS Compliant, RT curing, Polyurethane Resin System for Potting & Casting Shipal 30 B / Hardener IS :25 Filled, Highly Flexible, PU System for Stress Free Potting,RT Shipal 40 FR / Hardener IS :26 Filled, Fire Retardant, Halogen free, RoHS Compliant, Rigid, PU Potting System, RT Technical Information - Revision: 1, July
3 Other Assemblies Relays Shimocast 101 / Hardener IS :22 Filled, Flexible, PU Potting System,RT Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Shipal 81 FR / Hardener IS :16 Filled,Flexible, Fire retardant, Halogen free,rohs Compliant, PU Potting System,RT Shipal 40 FR / Hardener IS :26 Filled, Fire Retardant, Halogen free,rohs Compliant, Rigid,PU Potting System,RT Potting, RT Cable Joints Shimocast 101 / Hardener IS :22 Filled, Low Viscosity, Flexible, PU Cable Jointing System, RT Shipal 40 / Hardener IS :30 Filled, Rigid, Good Chemical Resistance, PU Cable Jointing System, RT Shimocast 101 M2 / Hardener IS :16 Filled, Medium Viscosity, Flexible,PU Cable Jointing System, RT Battery Sealing Shimorez SV 400 / Hardener :08 Filled, Acid Resistant, EP System for Battery Terminal Sealing Shimorez 400 / Hardener :12 Unfilled, Acid Resistant, EP System for Battery lid & Terminal Sealing Elan-tron MC 19 / W :14 Filled, Acid Resistant, RoHS Compliant, Good Adhesion & Electrical Properties for lid & Terminal Sealing. Ignition coil Ignition Coil Dobefil 60 / Hardener 7055/Acc.803 M 100:50:0.5 Filled, Off White Colored, EP Resin System, Heat Shimorez 400 / Elan-tron WH 95 / Acc.01 / 100:100:01: Unfilled, Clear, EP Resin System, Heat Filler Ignition Coil High Tg Dobeckot 5401 / Hardener 7055 / Acc :60:1 Filled, High Tg, Black Colored, EP Resin System, Heat. M Elan-tron MC 5701 / WH :30 Filled, Fire Retardant, Halogen free, Very High Tg, EP Resin System, Heat Technical Information - Revision: 1, July
4 Inductive Components PCB- Protection Shimocast 101 / Hardener IS :22 Filled, Flexible, PU Casting & Potting System, RT. Elan-tron MC W :8 Filled, Self-extinguishing, RoHS Compliant, Thermal Class H (180 C). High Thermal Conductivity. Epoxy Resin System. The system is UL 94 V0 and listed (File E and E116643). Potting, RT Elan-tron PU 54 + PH :16 Filled, Fire Retardant, RoHS Compliant, RT curing, Polyurethane Resin System for Potting & Casting Shipal 30 B / Hardener IS :25 Filled, Highly Flexible, PU Potting System, RT. LV- Transformers Dobefil 60 / Hardener EH :25 Filled, Rigid, EP System, RT Elan-tron MC W :8 Filled, Self-extinguishing, RoHS Compliant, Thermal Class H (180 C). High Thermal Conductivity. Epoxy Resin System. The system is UL 94 V0 and listed (File E and E116643). Dobeckot 5601 / Hardener :12 Filled,Fire Retardant, Halogen free, RoHS Compliant, Rigid EP Potting System, RT Shipal 40 / Hardener IS :30 Filled, Rigid, PU Potting & Casting System,RT Shipal 40 FR / Hardener IS :26 Filled, Fire Retardant, Halogen free,rohs Compliant, Rigid,PU Potting System,RT Electromagnetic Devices / Switches Dobefil 60 /Hardener EH :25 Filled, Rigid, EP Potting & Casting System,RT Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Elan-tron MC W : 16 Filled, Semi Rigid, Halogen free, Fire Retardant, EP System for Potting, RT Shipal 40 / Hardener IS :30 Filled, Rigid, PU Potting & Casting System,RT Shipal 40 FR / Hardener IS :26 Filled, Fire Retardant, Halogen free, Rigid, RoHS Compliant,PU Potting System,RT Lift magnets Shimokote 10 / Hardener :18 Filled, Semi Flexible, EP Potting System,RT Elan-tron MC W :16 Filled, Fire Retardant, Halogen free, RoHS Compliant, Rigid,PU Potting System, RT Technical Information - Revision: 1, July
5 Heavy - Electric Dry Type - Resin Cast Transformers Shimoplast 08 / Acc.01 / Filler EP 09 /Acc.803 M / Filler 1 : : Unfilled, EP Resin System for Casting, Heat. Unfilled, EP Resin System for Casting, Heat. Instrument Transformers Shimoplast 08 / Acc.01+Filler EP 09 /Acc.803 M + Filler 100:100:10:1: : Unfilled, EP Resin System for Casting, Heat. Unfilled, EP Resin System for Casting, Heat. HV Insulators / Bushings /Bus Bar Supports / Switchgear Shimoplast 08 / Acc.01+Filler EP 09 /Acc.803 M + Filler 1 : : Unfilled, EP Resin System for Casting, Heat. Unfilled, EP Resin System for Casting, Heat. Air Core Reactor Shimorez 400 / Hardener :12 Unfilled, very high Tg, EP Resin System for Impregnation & Coating, RT curing Dobeckot 520 F / Hardener :12 Unfilled, Very High Tg, EP Resin System for Impregnation & Coating, RT Small coils & motors Solenoid Valves Elan-tron MC W :16 Filled, Semi Rigid, Halogen free, Fire Retardant, EP System for Potting, RT Dobeckot 5601 / Hardener :12 Filled, Fire Retardant, Halogen free,rohs Compliant, Rigid, EP System, RT curing Dobeckot 5503 / Hardener EH :25 Filled, Rigid EP Potting & Casting System,RT Shimorez 402 M / Hardener :40 Unfilled, Semi rigid, Clear EP System, RT Submersible Pump Dobeckot 5503 / Hardener EH :25 Filled, Rigid EP Potting & Casting System,RT Dobeckot 5601 / Hardener :12 Filled, Fire Retardant, Halogen free,rohs Compliant, Rigid, EP System,RT Shimokote 9 Black / Hardener :25 Filled, Rigid, EP Potting & Casting System,RT Technical Information - Revision: 1, July
SOLAR ENERGY. solutions. adhesives, sealants, and Potting encapsulants For solar energy applications
SOLAR ENERGY solutions adhesives, sealants, and Potting encapsulants For solar energy applications Micro-inverters charge controllers J-Box Potting Batteries Bonding / sealing EPIC RESINS quality SolutIoNS
About ABB Micafil Facts
About ABB Micafil Facts Location Zurich Employees ~ 200 Switzerland Revenues 2008 85 MUSD Production area 11 000 m 2 Export > 80%. About ABB Micafil History 1918 1939 1946 1960 1970 1972 1993 1996 1998
WACKER Thermally Conductive Silicone Adhesives & Potting Compounds
Description Modern power semiconductor devices and electronic assemblies are both subject to the same trend miniaturisation. This is leading to ever higher operating temperatures. WACKER s thermally silicone
QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems
Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route
Solenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
Maintaining electrical equipment/systems
Unit 037 Maintaining electrical equipment/systems Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
Epoxy Curing Agents and Modifiers
Epoxy Curing Agents and Modifiers Epodil LV5 Diluent Technical Data Sheet Description V5 diluent is a chemically inert, low viscosity liquid hydrocarbon resin. It is soluble in and compatible with a wide
11. Spare Parts. applications since applications since
2 8 2 6 20 2 8 0 5 6 8 9 2 2 25 7 8 9 5 0 2 2 7 . Spare Parts * C0 C02 C06 C0 C7 C C0 C5 C58 Article No. Description B-26 B-2009 Steam generation Steam cylinder CY DN20 compl. with electrodes and hand
This parts list is current as of the above revision date. See for the current revision.
Parts List This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-.pdf for the current revision. Heat Pumps - Commercial Table of Contents Model Explanation...................................................................................................................
SHELF LIFE. Appearance Color 1 (Gardner) Pot life 21 C (70 F) Increased by 15-60% 5 Thin Film Set Time 21 C Increased by % 5
Epoxy Curing Agents and Modifiers EPODIL LV5 Diluent DESCRIPTION diluent is a chemically inert, low viscosity liquid hydrocarbon resin. It is soluble in and compatible with a wide variety of epoxy resins
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
SAPCON. User Manual. Capacitance Continuous Level Indicator. . Introduction. . General Description. . Principle of Operation. .
User Manual Capacitance Continuous Level Indicator Comprehensive User s Manual. Introduction. General Description. Principle of Operation. Specifications. Connection Diagrams. Quick Calibration Chart.
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
Tolerance code. Lead space
FEATURES Non-inductive construction. Self-healing. Flame-retardant plastic case and epoxy resin (compliance with UL 94V-0). High moisture-resistance. Good solderability (plated with 100% Matte Sn). APPLICATIONS
CONDUCTIVITY POINT/S LEVEL SWITCH JAYCEEAQUA 4000 SERIES
I N S T R U C T I O N - M A N U A L CONDUCTIVITY POINT/S LEVEL SWITCH JAYCEEAQUA 4000 SERIES FUNCTION: Conductivity level limit switches are based on the principle of measuring level through the electrical
DCA Modified Alkyd Conformal Coating (SCC3)
Page 1 DCA Modified Alkyd Conformal Coating (SCC3) DCA is a flexible, transparent and unique modified alkyd conformal coating specifically designed for the protection of electronic circuitry. It has been
Surf Clear EVO Epoxy system for surfboards
Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,
SIROCCO. Robust high-pressure diecast aluminium housing. Computer aided design reflector. Graduated scale for accurate aiming.
SIROCCO is a family of floodlight, surface washer and area lighting. Three (3) types of light distribution, asymmetric, bi-symmetric, and road optic. Available in 2 sizes with a range of mounting accessories
24 AWG Nano M8 Single Ended and Double Ended Assemblies
24 AWG M8 Single Ended and Double Ended Abrasion Chemicals Flexing UL Listed CSA IP68 Rated RoHS Compliant 300 V Operating Temperature Range -30 C to 90 C Current Rating: 4 Amps Cord sets made with Trex-Onics
3M Thermally Conductive Epoxy Adhesive TC-2810
Technical Data January, 2010 3M Thermally Conductive Epoxy Adhesive TC-2810 Product Description 3M Thermally Conductive Epoxy Adhesive TC-2810 is a boron nitride filled, two-part, thermally conductive
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
Rheem Spare Parts Manual Commercial gas model A Exterior 265L
Commercial gas model A631265 Exterior 265L 1 2 36 3 6 14 11 31 7 40 8 9 10 14 22 23 25 11 16 24 7 12 13 9 20 21 19 17 18 37 38 39 34 35 26 4 5 32 30 39 29 38 27 33 37 28 Commercial gas model A631265 Exterior
Innovative Techniques for Mitigating Arc Flash Exposure
Innovative Techniques for Mitigating Arc Flash Exposure Presented at MEMSA 2009 Annual Meeting & Technical Symposium 2007 Eaton Corporation. All rights reserved. INTRODUCTION. As more and more industries
Simple Set Max. Pressure Independent Control Valves 2 Way 2-1/ /09/18
The Bray Simple Set Max is a flanged pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SSM Series combines high rangeability
PSD 250 Minimum Lubrication System. For lubricants in the 1000 mm²/sec viscosity range
PSD 250 Minimum Lubrication System For lubricants in the 1000 mm²/sec viscosity range PSD 250 Spray System Minimum lubrications system for the external feed of paste-type products Use Formdrill with 1
PolySwitch Radial-leaded Resettable Devices
PolySwitch Radial-leaded Resettable Devices Radial-leaded Raychem Circuit Protection has pioneered PPTC technology for over twenty years. Our radialleaded products represent the widest range of product
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF)
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF) LIQUID PHOTOIMAGEABLE SOLDER MASK Application by Screen Printing Dark Green Satin Available in DI version Halogen-Free RoHS Compliant Compatible with
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F03 Product Name Product Type Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) [CBB61-S3(P2)] Product Code
Laminating. POLYESTER MASTICS 48 Polyester mastic PLASTOBOAT...48 Polyester mastic with fiberglass FIBROBOAT...48 Wood mastic PLASTOBOIS...
POLYESTER RESINS 47 Polyester kit..................................................47 Polyester resin pre accelerated...................................47 Polyester resin non accelerated..................................47
INSTRUCTION BOOK CARE AND MAINTENANCE OF OIL-IMMERSED (R-TEMP-OR SILICONE IMMERSED) TRANSFORMERS
Industrial Transformers Secondary Substation Transformers INSTRUCTION BOOK CARE AND MAINTENANCE OF OIL-IMMERSED (R-TEMP-OR SILICONE IMMERSED) TRANSFORMERS TABLE OF CONTENTS Page SHIPPING........2 INSPECTION
MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:
MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve
Spare parts list ( ) Spare parts list Puzzi 8/1 C *CUL
Spare parts list (5.970-773.0) Spare parts list Puzzi 8/1 C *CUL 10.02.2012 www.kaercher.com EN Table of contents Spare parts list Puzzi 8/1 C *CUL (5.970-773.0)... 6 10 Tank (0.164-775.0)... 7 20 Individual
Nordic Model CCM0330, 0430, 0530, 0630 Service Parts Manual (Includes 50Hz. Units)
IMI CORNELIUS INC. www.cornelius.com Nordic Model CCM0330, 0430, 0530, 0630 Service Parts Manual (Includes 50Hz. Units) Publication Number: 631806058 Revision Date: October 13, 2009 Revision: E Visit the
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
Detector Carrier Gas Comments Detector anode purge or reference gas. Electron Capture Nitrogen Maximum sensitivity Nitrogen Argon/Methane
Gas requirements Gases for packed columns The carrier gas you use depends upon the type of detector and the performance requirements. Table 520-1 lists gas recommendations for packed column use. In general,
Pipe-Away Pressure Vacuum Vent /Conservation Vent
R R Pressure Vacuum Vent / End of Line Conservation Vent Flame Arrester with Pressure Vacuum Vent Pipe Away Pressure Vacuum Vent / Conservation Vent Vacuum Relief Vent Pressure Emergency Vent Free Vents
Rheem Spare Parts Manual. Commercial gas model A Exterior 265L
Commercial gas model A631265 Exterior 265L Commercial gas model A631265 Exterior 265L Item Part No. Description 1 221735 Foam cover 2 221914 Anode x 3 (black) 1153mm 2 221924 Anode x 3 (blue) 1153mm 3
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
Flygt low speed mixers
Flygt low speed mixers Outstanding efficiency motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0250A4-T4-W4, ICE0400A3-T3-W3 MODEL - ICE0500A3-T3-W3-R4, ICE0606A3-T3-W3-R4 Includes 50Hz.
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0250A4-T4-W4, ICE0400A3-T3-W3 MODEL - ICE0500A3-T3-W3-R4, ICE0606A3-T3-W3-R4 Includes 50Hz. Units ICE-O-Matic 11100 East 45th Ave Denver, Colorado 80239
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Product information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
https://www.indiamart.com/barodamouldsdies/
+91-8079453591 Baroda Moulds & Dies https://www.indiamart.com/barodamouldsdies/ We are manufacturer, trader and exporter of Epoxy Resin Cast Insulators, Bushings & other Epoxy Molded Components widely
WS Series WS-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU WS Series WS-BOP Series Customer Service: 877.963.4966 High Pressure Wingstyle Hydraulic Couplings Applications:
XIAMETER RSN-0997 Resin
XIAMETER RSN-0997 Resin Silicone Resin in solvent FEATURES Easy to use Excellent electrical properties Good bond strength retention Moisture resistance Designed to meet MIL-I- 24092B APPLICATIONS Impregnant
Deep Well Submersible Pump Model MSU/MSUS
Instruction Manual Installation Manual Deep Well Submersible Pump Model MSU/MSUS Thank you for your purchase of the Deep Well Submersible Pump. To the customers Instruct the dealer (installation contractor)
ELITE CHEMICAL INDUSTRIES (PTY) LTD
MATERIAL SAFETY DATA SHEET SECTION 1 MANUFACTURERS NAME STREET ADDRESS 23 BARIUM STREET, ALRODE EXT 7 ALBERTON EMERGENCY TELEPHONE NUMBER + 27 (11) 864 4620 FAX : + 27 (11) 864 3403 E-MAIL ADDRESS WEBSITE
CABLE ENTRIES IN HAZARDOUS AREAS CORRECT SELECTION, INSTALLATION AND MAINTENANCE
CABLE ENTRIES IN HAZARDOUS AREAS CORRECT SELECTION, INSTALLATION AND MAINTENANCE Compiled by: Arthur Cameron NOT SO CORRECT SELECTION AND INSTALLATION OF CABLE GLANDS AND JUNCTION BOXES IN HAZARDOUS AREAS
PNEU-THANE K5090, K5094, K5096 Series
REINFORCED AIR & WATER HOSE An extremely lightweight, tough, flexible pneumatic air tool hose that is suitable for a wide range of industrial and construction applications. Tube Clear ether-based polyurethane.
Electrical Tapes Selection Guide. 3Innovation
Electrical Tapes Selection Guide Innovation M Electrical Tape Chart PRODUCT NAME PRODUCT TAPE SIZES TEMPERATURE TYPICAL DESCRIPTION THICKNESS AVAILABLE RATING APPLICATIONS Vinyl Electrical Tapes Scotch
VERSION 1 SUMP PUMP PIT UNIT KAWAMOTO PUMP ASIA CO.,LTD.
SUMP PUMP PIT UNIT FEATURES All needed parts are assembled and united as a sump pit and easy to install for short period. Sump tank is made of SUS with epoxy coating and pipe is integrated by stainless
Single-Phase Pad-Mounted Distribution. Single-Phase Pad-Mounted Distribution Transformers KVA
62-10 Single-Phase Pad-Mounted Distribution Catolog Transformers Section Howard Industries, Inc. Certifi ed to ISO 9001:2015 62-10 Single-Phase Pad-Mounted Distribution Transformers 5-500 KVA 10002179
K Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0250A5-T5-W5, ICE0400A4-T4-W4 MODEL - ICE0500A4-T4-W4-R5, ICE0606A4-T4-W4-R5 Includes 50Hz.
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0250A5-T5-W5, ICE0400A4-T4-W4 MODEL - ICE0500A4-T4-W4-R5, ICE0606A4-T4-W4-R5 Includes 50Hz. Units Date 1/09 Table Of Contents This parts list contains
Hammond Control Transformers
Hammond Control Transformers Q SERIES CONTROL TRANSFORMERS SINGLE PHASE ENCLOSED POTTED INDOOR/OUTDOOR TYPE 50 TO 5000 FEATURES: For applications where cost effective approach to general purpose loads
CONTENTS TABLE OF MAIDA S HISTORY TERMINOLOGY & GENERAL SPECIFICATIONS. iii. LEAD CODES and TAPE & REEL STANDARD SERIES 1 HC SERIES 17
TABLE OF CONTENTS MAIDA S HISTORY TERMINOLOGY & GENERAL LEAD CODES and TAPE & REEL i ii iii STANDARD SERIES 1 HC SERIES 17 LOW PROFILE SERIES 33 THERMALLY PROTECTED SERIES 39 HIGH ENERGY SERIES LEAD CODES
Valve Proving System VDK 200 A S02
Valve Proving System VDK 200 A S02 Valve proving system with the following approvals. UL Recognized File # MH17004 CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter
TWC Services, Inc. Structured On-The-Job Training for JT- 1, 2, 3
TWC Services, Inc. Structured On-The-Job Training for JT- 1, 2, 3 The following tasks parallel the Jr. Tech (JT-1, 2, 3) description and development plan and use the Refrigeration and Air conditioning
Project: Consultant : MEP Contractor: PREPARED BY: DORMAN SMITH SWITCHGEAR - DUBAI REVIEWED BY CONSULTANT : Page 1 of 15
PRCEDURES FR RUTINE TESTING F CAPACITR BANKS Consultant : MEP Contractor: Project: PREPARED BY: DRMAN SMITH SWITCHGEAR - DUBAI NAME: REVIEWED BY CNSULTANT : NAME: SIGNATURE: SIGNATURE: Page 1 of 15 Table
Valve Proving System VDK 200 A S06*
Valve Proving System VDK 200 A S06* Valve proving system with the following approvals. UL Recognized File # MH17004 CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter
EASA Safety Information Bulletin
EASA SIB No: 2008-50 EASA Safety Information Bulletin SIB No.: 2008-50 Issued: 23 June 2008 Subject: Aircraft s with Fraudulently Produced Documents that include FAA Airworthiness Tags and traceability
PRODUCT INFORMATION ÖLFLEX ROBUST 215 C
GmbH PRODUCT INFORMATION Proven all-weather control cables resistant to a wide range of chemical media Outstanding weather, ozone and UV resistance together with the wide temperature range enable versatile
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure Switching range: -250 +100 mbar, 1 16 mbar to 16 63 bar Temperature: max. 70 C Material: Copper, brass, stainless
Installation and maintenance instructions for liquid-filled distribution transformers
Installation and maintenance instructions for liquid-filled distribution transformers Your partner in energy solutions Installation and maintenance instructions for liquid-filled distribution transformers
TECHNICAL DATASHEET CARAPACE EMP110 W- LED
TECHNICAL DATASHEET CARAPACE EMP110 W- LED Aqueous Developable PHOTOIMAGEABLE SOLDERMASK for LED applications PRODUCT DESCRIPTION Carapace EMP110 has been used in the high volume production of PCBs since
WHITE PAPER on Explosion Proof and Intrinsic Safety Solutions. Oct. 2013
WHITE PAPER on Explosion Proof and Intrinsic Safety Solutions Oct. 2013 TABLE OF CONTENTS Abstract... 3 Abbreviations... 4 Introduction to Standards... 5 Protection Layers... 7 Simple Devices... 7 Mechanical
TIGHTNESS. Glass sealing Thanks to our glass-sealing technology, ODU products can meet the most demanding tightness requirements.
TIGHTNESS Glass sealing Thanks to our glass-sealing technology, ODU products can meet the most demanding tightness requirements. ODU has the necessary expertise for developing and manufacturing connectors
References 6 k thermal overload relays, adjustable from 0.11 to 16 A
s 6 k thermal overload relays, adjustable from 0.11 to 16 A 3-pole relays with screw clamp terminals These overload relays are designed for the protection of motors. They are compensated and phase failure
Comparison of Sealing Methods for FDM Materials
TECHNICAL APPLICATION GUIDE Comparison of Sealing Methods for FDM Materials There are many methods, and even more materials, for sealing FDM parts. To assist in selecting the best approach, Stratasys,
(51) Int Cl.: B64C 39/02 ( ) A63H 29/16 ( )
(19) TEPZZ Z64 7A_T (11) EP 3 06 427 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 17.08.16 Bulletin 16/33 (1) Int Cl.: B64C 39/02 (06.01) A63H 29/16 (06.01) (21) Application number: 1389.2
Chemistry - Scale-up F.32. Lara TM - Controlled - Lab Reactor. The Concept
The Concept The concept behind Lara was to develop a flexible, affordable, easy-to-use CLR system. Lara incorporates many unique features that simplify the user s interaction saving time and money and
PUR cable. PUR cable. The harmonised version H05BQ-F/H07BQ-F can be used at building construction areas and where HAR-approval is required in Europe.
Polyurethan (PUR) cables are suitable as control cables, for fl exible use where high mechanical stress occurs. The PUR outer jacket has very good resistance against mineral oils and different chemical
Gas Network Craftsperson
Gas Network Craftsperson Unit EIAU06 Maintaining Instrumentation and Control Equipment Circuits This assessment specification has been developed as part of the network maintenance craftsperson standard
20 L 45 L. HFM-LP, ME, EDC] base function) G3/2x1 O2 sensor 1 connector, before TWC [KAT] K40k1 FP relay. K40k6 AIR pump relay.
![20 L 45 L. HFM-LP, ME, EDC] base function) G3/2x1 O2 sensor 1 connector, before TWC [KAT] K40k1 FP relay. K40k6 AIR pump relay.](/thumbs/80/81171079.jpg "20 L 45 L. HFM-LP, ME, EDC] base function) G3/2x1 O2 sensor 1 connector, before TWC [KAT] K40k1 FP relay. K40k6 AIR pump relay.")
Document number: pe07.6-p-000-99c Document title: Wiring diagram - ME-SFI fuel injection and ignition system Code: Designation: Coordinates: A6/ Right knock sensor 9 L A6/ Left knock sensor 8 L B Coolant
Advantages of ALEXIT BladeRep
Advantages of ALEXIT BladeRep Product can be used individually or as a complete system User-friendly packaging for repairs of any size Easy mixing and application Specifically designed for blade repair
MWR - MWF Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low power switching applications. Low pulse operation
Thermal Adhesives Ther-O-Bond 1500
Products / Interface Materials / Adhesives Thermal Adhesives Ther-O-Bond 1500 casting system for potting and encapsulation Ther-O-Bond 1600 Two part epoxy for bonding Ther-O-Bond 2000 Rapid cure acrylic
CO 2 radial piston compressor (transcritical)
CO 2 radial piston compressor (transcritical) At a glance Operating limits and performance data Technical data Dimensions and connections Scope of supply 124 126 129 130 131 Radial piston compressor (transcritical)
PSR-4000BN DI Colors (UL Name: PSR-4000BN / CA-40 BN)
PSR-4000BN DI Colors (UL Name: PSR-4000BN / CA-40 BN) LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Designed for the latest DI Technology Available in Black, Blue, White, Clear, Red, Yellow,
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure measuring monitoring analysing Switching range: -250 +100 mbar, 1 16 mbar to 16 63 bar Temperature: max. 70 C Material:
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
Product Information. Tolerance compensation unit TCU-Z
Product Information TCU-Z TCU-Z Compact. Flexible. Productive. TCU-Z tolerance compensation unit The TCU is compensated on the basis of elastomers that compensate in all three directions, enabling them
GROUTEC SCOTT VICKERS. Grouting Equipment
GROUTEC SCOTT VICKERS Grouting Equipment SCOTT VICKERS manufacturers a range of cement and chemical grouting equipment including:- PUMPS - The Cement Grout Pumps are all diaphragm-type. These diaphragms,
D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER
. ACCESSORIES AAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANLES & LIFT CORS GALVANIC PROTECTION KITS MUSHROOM STRAINER SLUGE STRAINERS NEMA 4 WATERTIGHT CONTROL & UAL LEVEL CONTROL (Replaces
INSTRUCTION MANUAL STATION CONTROLLER SC100 MOTOR PROTECTION ELECTRONICS, INC.
INSTRUCTION MANUAL STATION CONTROLLER SC100 MOTOR PROTECTION ELECTRONICS, INC. 2464 Vulcan Road, Apopka, Florida 32703 Phone: (407) 299-3825 Fax: (407) 294-9435 Revision Date: 2-12-07 STATION CONTROLLER
Spare Parts catalogue 2012
Spare Parts catalogue 2012 TriFlo Pump Number Description Part # Pump Model Quantity 1 Barrel Union Nut 9-2008 AH, XH, ET, ST, SK 2 2 Barrel Union Pipe Socket 9-2007 AH, XH, ET, ST, SK 2 3 O-ring Barrel
METHOD STATEMENT SikaFuko VT System
METHOD STATEMENT 01.05.2018 / VERSION 3 / SIKA UK / ALEX BURMAN WATERPROOFING TABLE OF CONTENTS 1 Scope 3 2 System Description 3 2.1 Limitations 3 2.2 References 3 3 Products 4 3.1 Materials Storage 4
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure Switching range: -250 +100 mbar, 1 16 mbar to 16 63 bar Temperature: max. 70 C Material: Copper, brass, stainless
C I R E D 18 th International Conference on Electricity Distribution Turin, 6 th to 9 th June 2005
RELIABILITY AND LONG TIME BEHAVIOUR OF MV-DISTRIBUTION SWITCHGEAR IN SEVERE ENVIRONMENTAL CONDITIONS - EXAMINATION OF SF 6 -INSULATED RING MAIN UNITS (RMU) UP TO 20 YEARS IN SERVICE. B. I. Oftedal, Siemens
NZQA Expiring unit standard version 7 Page 1 of 8. Demonstrate knowledge of safe working practices in telecommunications.
Page 1 of 8 Title Demonstrate knowledge of safe working practices in telecommunications Level 2 Credits 4 Purpose This unit standard covers basic instruction in safe working practices in the telecommunications
Product information. Capacitive. Level measurement in liquid VEGACAL 62 VEGACAL 63 VEGACAL 64 VEGACAL 66 VEGACAL 69. Document ID: 30138
Product information Level measurement in liquid VEGACAL 6 VEGACAL 6 VEGACAL 64 VEGACAL 66 VEGACAL 69 Document ID: 08 Contents Contents Description of the measuring principle... Type overview... 5 Housing
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure
Mechanical Pressure Switches for overpressure, vacuum pressure and differential pressure Switching range: -250 +100 mbar, 1 16 mbar to 16 63 bar Temperature: max. 70 C Material: Copper, brass, stainless
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSURE PUMP To minimize vibration, it is best to build brackets on the motor itself, similar to alternator brackets. Use cardboard to construct a pattern first before making
PSR-9000 FXT Series (UL Name: PSR-9000AC/CA-90AC)
PSR-9000 FXT Series (UL Name: PSR-9000AC/CA-90AC) LIQUID PHOTOIMAGEABLE SOLDER MASK Designed for Flexible Printed Circuit Boards Screen Print Application Halogen-Free Compatible with Lead-Free Processing
Liquid level instruments BM 24 /BM 51
KROHNE 09/2001 7.02362.21.00 GR/PRINTO Liquid level instruments / Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
II 2G EEx ia IIC T6. Ignition protection class
ATEX General information According to 94/9/EC, a device that is to be used in an environment at risk of explosion may only be brought into the market if it satisfies the standards specified in the norm.
The accuracy and safety of the connected measuring devices are directly regulated. of the introduced current transformers.
Product family Current transformers Current transformers (CTs) are introduced where it is difficult to access a direct measuring ot network current. Current transformer transforms the high network current
RPLA. Heat Pumps. Parts List 19-July-2011
Parts List This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-.pdf for the current revision. Heat Pumps Table of Contents Model Explanation...................................................................