Event Time Event Name Meeting Room Sunday, January Monday, January
|
|
|
- Sherilyn Palmer
- 5 years ago
- Views:
Transcription
1 Event Time Event Name Meeting Room Sunday, January :00 PM - 06:00 PM Registration 12:00 PM - 06:00 PM ASME Office 01:00 PM - 03:00 PM CNC Task Group on NQA-1 Part II Checklist [CLOSED MEETING] 03:00 PM - 05:30 PM CNC Task Group on Survey Demonstrations [CLOSED MEETING] 03:00 PM - 06:00 PM TG Procedures/Review Req. (CBPVCA) Oak 09:00 AM - 05:00 PM ASME Senior Consultant Meeting 01:00 PM - 05:00 PM Task Team NDE Performance Qualifications (SC XI) 04:00 PM - 06:00 PM TG Weld Residual Stress (WRS) for New Plant Components (BPV III) 04:00 PM - 08:00 PM TG Creep Strength Enhanced Ferritic Steels (BPV II) 05:00 PM - 07:00 PM TG HDPE Materials, Fabrication & Examination (SG-MFE, BPV III) Suite 05:00 PM - 07:00 PM SG Materials (SC IV) Continental 07:00 PM - 09:00 PM TG Evaluation Procedures for Degraded Buried Pipe Monday, January :00 AM - 06:00 PM Registration 08:00 AM - 10:00 AM QAI Subcommittee on Accreditation Sage 08:00 AM - 05:00 PM Committee on Nuclear Certification (CNC) 12:00 Noon - 01:30 PM CNC Officers Meeting 07:00 AM - 08:00 AM TG Data Analysis (BPV II) 08:00 AM - 10:00 AM WG High Temperature Liquid-Cooled Reactors (SG-HTR, BPV III) 08:00 AM - 10:00 AM SG General Requirements (BPV XII) 08:00 AM - 11:30 AM ANDE SC on Testing Working Sessions Continental 08:00 AM - 12:00 PM Joint TG on HDPE NDE (BPV III/V/XI) 08:00 AM - 12:00 PM TG Repair by Carbon Fiber Composites
2 08:00 AM - 01:00 PM SG External Pressure (BPV II) 08:00 AM - 01:00 PM SG Performance and Procedure Qualifications (BPV IX) 08:00 AM - 01:00 PM SWG Industry Experience for New Plants (BPV III & BPV XI) Consulate 08:00 AM - 02:00 PM WG Piping Design (SG-D, BPV III) Consort I 08:00 AM - 04:00 PM PCC SC R&T Subgroup on Examination and Testing 08:00 AM - 04:00 PM SG Strength, Ferrous Alloys (BPV II) 08:00 AM - 04:00 PM SWG Design by Analysis (BPV VIII) 08:00 AM - 05:00 PM SG Nonferrous Alloys (BPV II) 08:30 AM - 10:30 AM TG Temper Bead Welding 08:30 AM - 12:00 PM TG General Requirements for Graphite Core Components 08:30 AM - 12:00 PM TG Cast Stainless Steel Oak 08:30 AM - 05:00 PM SWG RIM 08:30 AM - 05:00 PM WG Risk-Informed Activities The Roof Westin Oaks - 21st Level 08:30 AM - 06:00 PM WG Pipe Flaw Evaluation 10:00 AM - 12:00 PM Committee on Conduct of Conformity Assessment Activities (BCA) I 10:00 AM - 12:00 PM SG Fabrication, Inspection, and Continued Service (BPV XII) 10:00 AM - 12:00 PM WG High Temperature Gas-Cooled Reactors (SG-HTR, BPV III) 10:30 AM - 01:00 PM TG Partial Excavation and Weld Repair of Dissimilar Welds 11:30 AM - 02:00 PM Materials on Database Training Session Regal Westin Galleria - 24th Level 01:00 PM - 02:00 PM SG Brazing (BPV IX) I 01:00 PM - 03:00 PM ASME ANDE Standards Committee 01:00 PM - 05:00 PM SG Design (SC-SVR) 01:00 PM - 05:00 PM SG Ferrous Specifications (BPV II) Oak 01:00 PM - 05:00 PM SG Design and Materials (BPV XII) 01:00 PM - 05:00 PM SG General Requirements (SC-SVR)
3 01:00 PM - 05:00 PM SG Testing (SC-SVR) 01:00 PM - 05:00 PM TG Appendix VIII 01:00 PM - 05:00 PM WG Analysis Methods (SG-ETD, BPV III) 01:00 PM - 05:00 PM WG Design of Division 3 Containments (SG-CD, BPV III) Consulate 01:00 PM - 05:00 PM WG Graphite and Composite Design Sage 01:00 PM - 05:00 PM WG HDPE Materials (SG-MFE, BPV III) 01:00 PM - 07:00 PM TG High Strength Nickel Alloys Issues 02:00 PM - 04:00 PM WG Environmental Effects Continental 02:00 PM - 04:00 PM SG Welded Boilers (BPV IV) 02:00 PM - 04:00 PM TG Temper Bead Welding (BPV IX) 02:00 PM - 05:00 PM SG Materials (BPV IX) I 02:00 PM - 05:00 PM TG Buried Components Inspection and Testing 02:00 PM - 06:00 PM WG Environmental Fatigue Evaluation Methods Consort I 03:00 PM - 05:00 PM Project Team on Section V Glossary of Terms (BPV V) I 03:00 PM - 05:00 PM SG General Requirements (BPV IX) I 03:00 PM - 05:00 PM TG on Optimization of Ultrasonic Examination Requirements Executive Westin Oaks - 4th Level 03:30 PM - 07:00 PM ANDE SC on Testing Working Session 04:00 PM - 06:00 PM SG RRA Executive 04:00 PM - 06:30 PM SG International Material Specifications (BPV II) 04:00 PM - 07:00 PM SG Stength of Weldments (BPV II & BPV IX) 04:00 PM - 07:00 PM SWG Regulatory Interface (BPV III) Standards Committee on Qualifications for Authorized 04:00 PM - 07:00 PM Inspection (QAI) 05:00 PM - 06:30 PM SC-SVR Chairman's Meeting 05:00 PM - 06:30 PM SG WCS Executive 05:00 PM - 07:00 PM TG Alloy 617 Code Case (SG-ETD, BPV III) Regal Westin Galleria - 24th Level
4 05:00 PM - 07:00 PM WG Non-Metals Repair/Replacement Activities and TG HDPE Repair/Replacement 05:00 PM - 07:00 PM SG Nonmandatory Appendices (BPV XII) 06:00 PM - 08:00 PM TG Flaw Evaluation in HDPE Pipe 06:00 PM - 08:30 PM SG Toughness (BPV VIII) 06:30 PM - 08:00 PM TG Scope & Exemptions (BPV VIII) Tuesday, January :00 AM - 06:00 PM Registration BPV II Executive Session 08:00 AM - 09:30 AM 08:00 AM - 02:00 PM 03:00 PM - 08:00 PM Committee on BPV Conformity Assessment (CBPVCA) BPV XI Executive Committee 08:00 AM - 11:00 AM BPV Committee on Transport Tanks (BPV XII) 08:00 AM - 11:00 PM WG Radiography (BPV V) 08:00 AM - 12:00 PM SG Design (BPV I) 08:00 AM - 12:00 PM WG HDPE Design of Components (SG-CD, BPV III) SWG General Requirement Consolidation 08:00 AM - 12:00 PM 08:00 AM - 12:00 PM WG Creep-Fatigue & Negligible Creep (SG-ETD, BPV III) 08:00 AM - 12:00 PM SG NUPACK (BPV III) 08:00 AM - 01:00 PM WG Valves (SG-CD, BPV III) 08:00 AM - 01:30 PM BPV Committee on Welding, Brazing & Fusing (BPV IX) 08:00 AM - 03:00 PM WG Supports (SG-CD, BPV III) 08:00 AM - 04:00 PM WG ISC 08:00 AM - 04:00 PM WG Vessels (SG-CD, BPV III) 08:00 AM - 04:00 PM SG Design (BPV VIII) I The Roof Westin Oaks- 21st Level II Regal Westin Galleria - 24th Level Continental Westin Oaks- 3rd Level
5 08:30 AM - 10:30 AM PTC 25 Pressure Relief Devices 08:30 AM - 12:00 PM WG Procedure Qualification and Volumetric Exam 08:30 AM - 12:00 PM WG Personnel Qualification SV and ECE 08:30 AM - 12:00 PM Sub-Task Groups on Severe Accident Management Sage 08:30 AM - 03:00 PM WG General Requirements 08:30 AM - 04:00 PM WG Flaw Evaluation Consort I 08:30 AM - 04:00 PM WG Operating Plant Criteria Consulate 08:30 AM - 04:00 PM WG Pressure Testing Oak 08:30 AM - 05:00 PM WG Containment Executive Westin Oaks - 4th Level 08:30 AM - 05:00 PM WG Graphite and Composite Design 08:30 AM - 05:00 PM WG Welding and Special Repair Processes 08:30 AM - 05:00 PM WG Design and Programs 09:00 AM - 12:00 PM WG Fatigue Strength I 09:00 AM - 12:00 PM ASME ANDE SC on Testing Working Session 09:30 AM - 05:00 PM BPV Committee on Materials (BPV II) 12:00 PM - 04:00 PM WG Ultrasonics (BPV V) 12:15 PM - 01:45 PM TG Materials Supporting Division 3 Strain-Based Criteria (BPV II/III) 01:00 PM - 04:00 PM SG Fabrication & Examination (BPV I) II 01:00 PM - 04:00 PM WG Quality Assurance, Certification & Stamping I 01:00 PM - 04:00 PM WG Duties and Responsibilities 01:00 PM - 05:00 PM WG Allowable Stress Criteria (SG-ETD, BPV III) 01:00 PM - 05:00 PM Board on Conformity Assessment (BCA) 01:00 PM - 05:00 PM SWG HDPE Stakeholders (BPV III) 01:00 PM - 05:00 PM Subcommittee on Safety Valve Requirements (SC SVR) 01:00 PM - 05:00 PM SWG New Advanced Light Water Cooled Reactor Plant Construction Issues (BPV III)
6 01:30 PM - 03:00 PM SG Cast Iron Boilers (BPV IV) 02:00 PM - 04:00 PM TG Plate Heat Exchangers (BPV VIII) 02:00 PM - 04:00 PM TG PWHT (BPV IX) 02:00 PM - 05:00 PM WG Design Methodology 03:00 PM - 05:00 PM SG Plastic Fusing (BPV IX) SG Care and Operation of Heating Boilers 03:30 PM - 05:00 PM Section VI (IV) 04:00 PM - 05:00 PM WG Guided Wave UT (BPV V) 04:00 PM - 06:00 PM Project Team on Article 2 Appendices (BPV V) TG Evaluation of Beyond Design Basis Events 04:00 PM - 06:30 PM 04:00 PM - 06:30 PM TG U-2(g) (BPV VIII) 05:00 PM - 06:00 PM WG Acoustic Emissions (BPV V) WG High Temperature Flaw Evaluation 05:00 PM - 06:00 PM (SG-ETD, BPV III & XI) 05:00 PM - 07:00 PM Subcommittee Design (BPV III) WG Probabilistic Methods in Design 05:00 PM - 07:00 PM (SG-CD, BPV III) 05:00 PM - 07:00 PM ISI Program Owners Group 05:00 PM - 07:00 PM TG Modernization (BPV I) 05:15 PM - 06:30 PM BPV IV Executive Committee 06:00 PM - 07:30 PM Materials Database Working Group (MDWG/II) Project Team on the Reorganization of Section V 06:00 PM - 08:00 PM (BPV V) Wednesday, January :00 AM - 06:00 PM Registration The Roof Westin Oaks- 21st Level I II Consort I I The Roof Westin Oaks- 21st Level II 07:00 AM - 08:00 AM BPV Committee on NDE Executive Session (BPV V) 06:00 PM - 08:00 PM BPV III Executive Meeting 07:30 AM - 10:00 AM SG Elevated Temperature Design (SC-D, BPV III)
7 08:00 AM - 12:00 PM SG General Requirements & Piping (BPV I) II 08:00 AM - 04:00 PM SG Design Methods (SC-D, BPV III) 08:00 AM - 04:00 PM SG Component Design (SC-D, BPV III) I 08:00 AM - 04:00 PM SG Materials, Fabrication & Examination (BPV III) 08:00 AM - 04:00 PM SG General Requirements (BPV VIII) 08:00 AM - 04:00 PM SG Heat Transfer Equipment (BPV VIII) 08:00 AM - 04:00 PM SG Fabrication & Inspection (BPV VIII) 08:00 AM - 04:00 PM SG RRA 08:00 AM - 04:30 PM SG Materials (BPV VIII) 08:30 AM - 11:30 AM SG Surface Examination Methods (BPV V) 08:30 AM - 01:00 PM SG Evaluation Standards 08:30 AM - 04:00 PM SG General Requirements (BPV III) 08:30 AM - 04:00 PM SG Water Cooled Systems 08:30 AM - 04:30 PM SG Non-Destructive Examination I 08:30 AM - 05:00 PM SWG Computational Modeling for Explicit Dynamics Regal Westin Galleria - 24th Level 09:00 AM - 05:00 PM BPV Committee on Heating Boilers (BPV IV) 10:00 AM - 12:30 PM SG High Temperature Reactors (BPV III) 10:00 AM - 03:00 PM WG Elevated Temperature Construction (SG-ETD, BPV III) 12:30 PM - 04:00 PM SG Volumetric Methods (BPV V) 01:00 PM - 04:00 PM SG Materials (BPV I) II 01:00 PM - 04:00 PM JSME/ASME Joint TG for System Based Code 01:00 PM - 04:30 PM TG Crack Growth Reference Curves 01:00 PM - 05:00 PM TG on Subsea Applications (SC VII Div 3) 03:30 PM - 5:30 PM Welding Residual Stresses International Round Phase 2B 04:00 PM - 06:00 PM SG Solar Boilers (BPV I) 04:00 PM - 07:00 PM SG General Requirements/Personnel Qualifications & Inquiries (BPV V)
8 04:15 PM - 06:00 PM Special Committee on Interpretations (BPV III) I 04:30 PM - 06:00 PM TG Common Rules (BPV VIII) 04:30 PM - 06:30 PM Special Committee on Interpretations 06:00 PM - 07:00 PM Special Committee on Interpretations (BPV VIII) Thursday, January :00 AM - 12:00 PM Registration BPV Committee on Nuclear Inservice Inspection Administrative Session 08:00 AM - 08:20 AM BPV Committee on Pressure Vessels Administrative Session (BPV VIII) 02:00 PM - 03:00 PM V 02:00 PM - 04:00 PM 07:00 AM - 01:00 PM 08:00 AM - 02:00 PM BPV Committee on Construction of Nuclear Facility Components Administrative Session (BPV III) BPV Committee on Nondestructive Examination (BPV V) BPV Committee on Construction of Nuclear Facility Components (BPV III) 08:00 AM - 02:00 PM BPV Committee on Pressure Vessels (BPV VIII) 08:00 AM - 04:00 PM BPV Committee on Power Boilers (BPV I) SWG General Requirement Consolidation 08:00 AM - 05:00 PM BPV Committee on Nuclear Inservice Inspection 08:30 AM - 04:30 PM SWG Computational Modeling for Explicit Dynamics 08:30 AM - 05:00 PM 02:00 PM - 08:00 PM SWG Editing and Review Friday, January BPV Technical Oversight Management Committee 07:30 AM - 11:30 AM (TOMC) SWG General Requirement Consolidation 08:00 AM - 05:00 PM 01:00 PM - 05:00 PM Board on Codes & Standards Operation (BCO) Saturday, January 31, 2015 I I II V Sage I
9 07:00 AM - 12:00 PM ASME Office SWG General Requirement Consolidation 08:00 AM - 05:00 PM *Please note meeting rooms are subject to change, please check Agenda while onsite*
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK May 5-10, 2019 Grand and Little America Hotels, Salt Lake City, Utah ***The schedule is subject to change. Please pick up the most updated schedule onsite***
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK October 29 - November 3, 2017 Pointe Hilton Squaw Peak Hotel
ASME BOILER CODE WEEK AND PRESSURE VESSEL CODE WEEK October 29 - November 3, 2017 Pointe Hilton Squaw Peak Hotel *** This schedule is subject to change. Please pick up the most updated schedule onsite***
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply
API-510 PRESSURE VESSEL INSPECTOR
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION July 2013 (Replaces July 2012) API Authorized Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance,
MSC Guidelines for Pressure Vessels
References: a. 46 CFR Part 54 Pressure Vessels S. T. Brady, CDR, Chief, Engineering Division b. ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 1, (1998 Edition) c. Navigation and Inspection
SECTION III. ASME Boiler and Pressure Vessel Code An International Code. Div ision 1 Su bs e c t i o n N C Class 2 Comp on en ts
R ules for Construction of Nuclear Facility Components 2015 ASME Boiler and Pressure Vessel Code An International Code Div ision 1 Su bs e c t i o n N C Class 2 Comp on en ts This copy downloaded on 2015-07-14
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION
BODY OF KNOWLEDGE API-510 PRESSURE VESSEL INSPECTOR CERTIFICATION EXAMINATION May and September, 2017 and January 2018 (Replaces May 2016) API Authorized Pressure Vessel Inspectors must have a broad knowledge
QUALITY ASSURANCE SPECIFICATION NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7
QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7 1.0 Purpose The purpose of this specification is to establish the minimum quality assurance requirements
Pressure Vessel Program
Pressure Vessel Program 1. PURPOSE 1.1 This program provides guidance to University employees that work with or are responsible for pressure vessels. Conformance to this Program aids the University in
Regulated Oil and Gas Companies under National Energy Board Jurisdiction
File 185-A000-41 8 August 2003 Regulated Oil and Gas Companies under National Energy Board Jurisdiction Dear Sir / Madam: Guidance Notes for Pressure Equipment under National Energy Board Jurisdiction
Inspection Credit for PWSCC Mitigation via Peening Surface Stress Improvement
Inspection Credit for PWSCC Mitigation via Peening Surface Stress Improvement Glenn A. White, Kyle P. Schmitt, Kevin J. Fuhr, Markus Burkardt, and Jeffrey A. Gorman Dominion Engineering, Inc. Paul Crooker
NASA AEROSPACE PRESSURE VESSEL SAFETY STANDARD
NSS/HP-1740.1 This Standard was CANCELLED on Jul 30 2002 22 FEBRUARY 1974 NASA AEROSPACE PRESSURE VESSEL SAFETY STANDARD OFFICE OF SAFETY AND RELIABILITY AND QUALITY ASSURANCE NATIONAL AERONAUTICS AND
HYDROGEN STANDARDIZATION INTERIM REPORT For
STP/PT-003 Designator: Meta Bold 24/26 Revision Note: Meta Black 14/16 HYDROGEN STANDARDIZATION INTERIM REPORT For Tanks, Piping, and Pipelines Date of Issuance: June 6, 2005 This report was prepared as
Liquefied gas cargo tanks and process pressure vessels
.1 -.3 Liquefied gas cargo tanks and process pressure vessels.1 General.1.1 The present texts give the general principles which are applied by Classification Societies for approval and survey of the relevant
Notice for Pressure Special Equipment Manufacture Licensing
AQSIQ Notice No.151 (2012) Notice for Pressure Special Equipment Manufacture Licensing To further enhance the implementation of the manufacture licensing system to imported pressure special equipment,
PRESSURE VESSELS, Part II: Pressure Vessel Design, External Pressure, Flat Covers and Self Nozzles.
PRESSURE VESSELS, Part II: Pressure Vessel Design, External Pressure, Flat Covers and Self Nozzles. STUDY NOTES Instructor: Javier Tirenti Table of contents Introduction... 4 1. Design codes... 8 1.1)
PROCEDURES FOR REPAIRS TO ASME NV STAMPED PRESSURE RELIEF DEVICES OF NUCLEAR SAFETY RELATED PRESSURE RELIEF VALVES
NB16 0603 NR Task Group 1 9 16 1. One update by NR task group page 3: 7/17/19 2. Two updates to S6.1 and S6.3 on page 1: 7/19/17 SUPPLEMENT 6 PROCEDURES FOR REPAIRS TO ASME NV STAMPED PRESSURE RELIEF DEVICES
PIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
Nondestructive Examination
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE V Nondestructive Examination 21. 2013 ASME FINAL Covers_V Nondestr MECH 5.9.indd 1 5/15/13 5:15 PM AN INTERNATIONAL CODE 2013 ASME Boiler
THE PROCESS OF JOINT INTEGRITY
BOLTED JOINTS A.333 THE PROCESS OF JOINT INTEGRITY To assist in managing a process, ask yourself the following questions: why, what, who, and how? Why do we need a Flange Joint Integrity program? This
Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
F. INTERPRETATION OF THE ESSENTIAL SAFETY REQUIREMENTS ON MANUFACTURING Guideline F-01 Guideline related to: Annex 1 Section 3.1.2 According to section 3.1.2 (permanent joining) of Annex I, the third party
2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
CONTENTS Article NC-1000 Introduction Figures Article NC-2000 Material
CONTENTS Foreword... xv Statements of Policy... xvii Personnel... xix Organization of Section III... xxxi Summary of Changes... xxxiii List of Changes in BC Order... xxxiv Article NC-1000 Introduction...
HEALTH AND SAFETY EXECUTIVE HM NUCLEAR INSTALLATIONS INSPECTORATE
HEALTH AND SAFETY EXECUTIVE HM NUCLEAR INSTALLATIONS INSPECTORATE New Reactor Generic Design Assessment (GDA) - Step 2 Preliminary Review Assessment of: Structural Integrity Aspects of AREVA/EdF EPR HM
Pressure Vessel Design
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with pressure vessel design.
DRAFT REGULATORY GUIDE DG-1074
Draft Guide DG-1074 - December 1998 Page 1 of 55 U.S. NUCLEAR REGULATORY COMMISSION OFFICE OF NUCLEAR REGULATORY RESEARCH DRAFT REGULATORY GUIDE December 1998 Division 1 Draft DG-1074 Contact: E.L. Murphy
API 510: Pressure Vessel Inspection Code (API Exam Preparation Training)
An Intensive 2-Week Training Course API 510: Pressure Vessel Inspection Code (API Exam Preparation Training) Maintenance, Inspection, Rating, Repair and Alteration 11-22 Aug 2019, Dubai 07-MAY-18 This
SDO MECHANICAL CODES CONVERGENCE BOARD:
4 TH MDEP CONFERENCE, SESSION 1: CODES AND STANDARDS HARMONIZATION SDO MECHANICAL CODES CONVERGENCE BOARD: ACHIEVEMENTS & PERSPECTIVES Presented By: Philippe Malouines, on behalf of the SDO board members
High Pressure Iron (HPI) Recertification Guidelines & Procedures
Page 1 of 5 HPI Shop 6201 Andrews Hwy Odessa, Tx 79762 Ph: 432-362-1818 Fx: 432-362-3118 Howard Supply Company www.howard-supply.com High Pressure Iron (HPI) Recertification Guidelines & Procedures Page
DVS Technical - Codes and Bulletins. Table of Contents
DVS 1904-1 (2010-02) Adhesive bonding of plastic in domestic installation Requirements on plants and personnel. 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in domestic installation Pipes and fittings
Justification of Risk Reduction through In-Service Inspection / REDUCE
NUGENIA+ WP6.12 Justification of Risk Reduction through In-Service Inspection / REDUCE Jens Gunnars Inspecta Technology AB jens.gunnars@inspecta.com WP6.12 Task Leader NUGENIA+ Final Seminar, Helsinki
PIPELINE SAFETY. Darin Burk, Manager Pipeline Safety. January 28, 2014
PIPELINE SAFETY Darin Burk, Manager Pipeline Safety January 28, 2014 Congressional Delegation of Authority Pipeline Safety Act of 1968 Congress Delegated Inspection and Enforcement Authority to the Secretary
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16148 Second edition 2016-04-15 Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for
JAPANESE PD EXAMINATIONS FOR DEPTH SIZING OF SCC IN AUSTENITIC STAINLESS STEEL PIPES FROM 2006 TO 2012
JAPANESE PD EXAMINATIONS FOR DEPTH SIZING OF SCC IN AUSTENITIC STAINLESS STEEL PIPES FROM 2006 TO 2012 Keiji Watanabe, Hajime Shohji, and Koichiro Hide PD center, Central Research Institute of Electric
2015 Spring Refining and Equipment Standards Meeting
2015 Spring Refining and Equipment Standards Meeting April 13-16, 2015 Sheraton Seattle Hotel Seattle, Washington Pre- and Post-Week Meetings: April 11-12 and April 16-17, 2015 Program (Current as of April
ENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
NBIC Committee Action Block
NBIC Committee Action Block Subject File Number Change of Service NB 08 0321 (Inspec) NB 08 0320 (Install) NB 08 0322 (R & A) Prop. on Pg. Proposal Explanation Part 2: Add a new Supplement 9, Requirements
Outline for Safety Performance Supervisory Inspection of Boiler and Pressure Vessel Products
Outline for Safety Performance Supervisory Inspection of Boiler and Pressure Vessel Products Appendix 1 Supervisory Inspection Rule for Safety Performance of Boiler and Pressure Vessel Products Published
STS 650 PRESSURE EQUIPMENT
Hunter Water Corporation ABN 46 228 513 446 Standard Technical Specification for: STS 650 PRESSURE EQUIPMENT This Standard Technical Specification (STS) was developed by Hunter Water Corporation to be
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM
2018 Fall Refining and Equipment Standards Meeting FINAL PROGRAM November 12-15, 2018 Hyatt Regency Orlando Orlando, Florida www.api.org/meetings Current as of November 11, 2018 Subject to change SOME
COMPETENCIES FOR IN-SERVICE INSPECTORS OF PRESSURE EQUIPMENT (NOTE 1)
COMPETENCIES FOR IN-SERVICE INSPECTORS OF PRESSURE EQUIPMENT (NOTE 1) AICIP-003REV7 31 JULY 2017 No COMPETENCY LIST Time (Mins) Note 7 1. PLANNING AND PREPARING FOR INSPECTION ISI SISI AS/NZ 3788 Reference
Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ASME PCC-1 2010 (Revision of ASME PCC-1 2000) Guidelines for Pressure Boundary Bolted Flange Joint Assembly A N A M E R I C A N N A T I O N A L S T A N D A R D ASME PCC-1 2010 (Revision of ASME PCC-1 2000)
July 2017 NBIC Committee Meeting Minutes
Table of Contents July 2017 NBIC Committee Meeting Minutes NBIC Committee Attendance July 2017 2 NB13-0903 SC Inspection 7-19-17 7 NB17-0202 SC Inspection 7-19-17 8 NB17-0603 SC Inspection 7-19-17 12 17-144
INSPECTION OF RECOVERY BOILERS
INSPECTION OF RECOVERY BOILERS W. B. A. (Sandy) Sharp SharpConsultant, Columbia, Maryland, U.S.A. TAPPI Kraft Recovery Short Course St. Petersburg, Florida, January 7-10, 2008 OUTLINE Purpose of inspections
Guidelines for Certification - Pressure Equipment Inspectors. DOCUMENT No PRO-CER-08
Guidelines for Certification - Pressure Equipment Inspectors DOCUMENT No Fifth Edition March 2015 Issued under the Authority of the Certification Board for Inspection Personnel, New Zealand (CBIP) CONTENTS
APPENDIX 1. PART 10: Leak Detection Inspector, Level 1, 2 and 3 CERTIFICATION SCHEME FOR PERSONNEL. 3 rd Edition, February 2016
CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
Project Manager David Tuttle. Summary of Changes New paragraph to add pressure relief valve requirements for locomotive boilers.
201 202 203 204 Record 11-1071 Record Level SC Proposal Project Manager David Tuttle Record Sub-Type Revision Pages Subject BPV I; PL-54 Pressure Relief Valves Proposal Add new paragraph PL-54 to Part
GUIDELINES. Systems. Pressure. Guidelines Acceptance of equipment, establishment of safe operating limits and fitness for service
GUIDELINES Pressure Systems Guidelines Acceptance of equipment, establishment of safe operating limits and fitness for service Document Reference: PSG 16 Issue 04 Dated 13/09/16 The Safety Assessment Federation
Australian/New Zealand Standard
AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs)
RG 3 Edition 4 December 2018 Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 / Edition: 4 Page 1 of 8 Contents 1. Introduction 2 2. Scope - Inspection Services
Regulations Respecting Compressed Gas Pressure Vessels
COMPRESSED GAS PRESSURE VESSELS SR 99/70 1 Regulations Respecting Compressed Gas Pressure Vessels Repealed by Chapter B-5.1 Reg 1 (effective January 1, 2007) Formerly Saskatchewan Regulations 99/70 (effective
TECHNICAL REPORT ON CAPACITY BUILDING IN USE OF EDDY CURRENT TESTING EQUIPMENT
REFERENCE NO. PNRA-CNS-NDT-49-13 MAY, 2013 TECHNICAL REPORT ON CAPACITY BUILDING IN USE OF EDDY CURRENT TESTING EQUIPMENT PAKISTAN NUCLEAR REGULATORY AUTHORITY P.O. BOX 1912, ISLAMABAD i Intentionally
API SC 6 SUBCOMMITTEE ON VALVE AND WELLHEAD EQUIPMENT TASK/WORK GROUP STATUS REPORT. 6D/6DSS TG02 on Revisions & Corrections FEBRUARY 8, 2011
API SC 6 SUBCOMMITTEE ON VALVE AND WELLHEAD EQUIPMENT TASK/WORK GROUP STATUS REPORT 6D/6DSS TG02 on Revisions & Corrections FEBRUARY 8, 2011 TABLE OF CONTENTS 1. SCOPE OF WORK... 1-1 2. PREVIOUS STATUS
ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing
INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION
CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to
Procedure: Pressure equipment safety
Procedure: Pressure equipment safety Purpose The purpose of this procedure is to define the method for safe operation and inspection of pressure equipment and the collection and recording of associated
2016 Fall Refining and Equipment Standards Meeting
2016 Fall Refining and Equipment Standards Meeting November 14-17, 2016 Hyatt Regency New Orleans New Orleans, Louisiana www.api.org/meetings Current as of October 18, 2016 Subject to change Pre- & Post-Week
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas
2018 Exploration & Production Winter Standards Meeting January 22-26, 2018 Hyatt Regency San Antonio San Antonio, Texas www.api.org Current as of November 29, 2017 Subject to change Final program distributed
RUPTURE HAZARD OF PRESSURE VESSELS
United States Office of Solid Waste EPA 550-F-97-002a Environmental Protection and Emergency Response Agency (5104) RUPTURE HAZARD OF PRESSURE VESSELS The Environmental Protection Agency (EPA) is issuing
v. Size shall be specified on drawings.
SPECIFICATION FOR VACUUM INSULATED PIPING Part 1 General 1. Submittals a. After award of contract and before executing any manufacturing, shop drawings and specifications shall be submitted to the customer
Pressure Equipment Directive (PED) 97/23/EC Page 033 of 124
Pressure Equipment Directive (PED) 97/23/EC Page 033 of 124 13.7 Pressure Equipment Directive (PED) 97/23/EC 1 The Pressure Equipment Directive (PED) 97/23/EC applies to the design, manufacturing and conformity
ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing
INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et
Standard Pneumatic Test Procedure Requirements for Piping Systems
the pressure equipment safety authority Standard Pneumatic Test Procedure Requirements for Piping Systems AB-522 Edition 2, Rev. 1 Issued 2016-10-24 Table of Contents FOREWORD... 1 1.0 INTRODUCTION...
Transport of gas tanks for motor vehicles
Committee of Experts on the Transport of Dangerous Goods and on the Globally Harmonized System of Classification and Labelling of Chemicals Transport of gas tanks for motor vehicles Submitted by the expert
Design and Analysis of Reactor Dish Vessel
IJIRST International Journal for Innovative Research in Science & Technology Volume 3 Issue 11 April 2017 ISSN (online): 2349-6010 Design and Analysis of Reactor Dish Vessel Aniket D. Patil PG Student
MSC Guidelines for Engine Cooling Systems
S. T. Brady, CDR, Chief, Engineering Division References: Contact Information: a. 46 CFR 56.60, 56.50-95 & 56.50-96 (Subchapter F) b. 46 CFR 77.03-1 (Subchapter H) c. 46 CFR 90.20 & 46 CFR 96.03 (Subchapter
CONVECTION SECTION FAILURE ANALYSIS AND FITNESS-FOR-SERVICE ASSESSMENT
ASSET INTEGRITY INTELLIGENCE CONVECTION SECTION FAILURE ANALYSIS AND FITNESS-FOR-SERVICE ASSESSMENT JAMES R. WIDRIG, Manager Advanced Engineering at Quest Integrity Group VOLUME 23, ISSUE 6 NOVEMBER DECEMBER
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-11027-03-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 14.02.2017 to 13.02.2022 Date of issue: 08.06.2017
DVS Technical Codes an Bulletins
DVS Technical Codes an Bulletins DVS 1904-1 (2010-02) Adhesive bonding of plastics in domestic installation Requirements on plants and personnel... 1 DVS 1904-2 (2010-02) Adhesive bonding of plastics in
By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document
By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has
Supervisory Inspection Rule for Safety Performance of. Boiler and Pressure Vessel Products
Supervisory Inspection Rule for Safety Performance of Boiler and Pressure Vessel Products Chapter 1 General Provisions Article 1 This rule is formulated in accordance with the Supervision Administration
Davis-Besse Small Bore Class 1 Piping Socket Weld Destructive Examination
Davis-Besse Small Bore Class 1 Piping Socket Weld Destructive Examination Authors: Ryan Hosler (AREVA) Beverly Cyrus (AREVA) Steve Fyfitch (AREVA); Presenter Trent Henline (FENOC) Introduction Davis-Besse
Annex G (normative) Requirements for Nondestructive Examination
Purchase API Spec online at http://www.techstreet.com/api Annex G (normative) G.1 General Requirements for Nondestructive Examination This annex specifies the requirements for NDE that shall be performed
DCV6 Disc Check Valve
1342050/6 IM-P134-22 ST Issue 6 DCV6 Disc Check Valve Installation and Maintenance Instructions Printed IM-P134-22 in the UK ST Issue 6 Copyright 20101 Safe operation of this product can only be guaranteed
Approved Code of Practice for. Pressure Equipment. (Excluding Boilers)
Approved Code of Practice for Pressure Equipment (Excluding Boilers) Published by the Occupational Safety and Health Service Department of Labour Wellington New Zealand Published June 2001 ISBN 0-477-03648-1
ACCREDITATION OF ON-LINE LEAK SEAL ORGANIZATIONS
ACCREDITATION OF ON-LINE LEAK SEAL ORGANIZATIONS TSSA GUIDE FOR SURVEY TEAMS The Technical Standards and Safety Authority Boilers and Pressure Vessels Safety Division 3300 Bloor Street West 14th Floor,
WATER MADE EASY MARINE ENERGY MUNICIPAL INDUSTRIAL
Capital Controls Series 71V3000 The Series 71V3000 electrically-heated vaporizer automatically vaporizes and superheats liquid chlorine, sulfur dioxide or ammonia at a rate controlled by the gas feed system.
RELIEF VALVES. General Description
RELIEF VALVES FOR CONDENSER SERVICE General Description Graham Viking Valves are produced in three basic designs: Horizontal, Vertical and Angle. The Horizontal and Angle valves are available with various
CERTIFICATION PROGRAM FOR ASSESSING THE MECHANICAL INTEGRITY OF PRESSURE VESSEL SYSTEMS
PVP-Vol. 487, Aging Management and License Renewal July 25 29, 2004, San Diego, California USA PVP2004-2969 CERTIFICATION PROGRAM FOR ASSESSING THE MECHANICAL INTEGRITY OF PRESSURE VESSEL SYSTEMS Chris
Technical Standards and Legislation: Risk Based Inspection. Presenter: Pierre Swart
Technical Standards and Legislation: Risk Based Inspection Presenter: Pierre Swart Agenda Change in Legislation. Where RBI fits in. Application to implement RBI. RBI concepts. Elements of an RBI analysis.
Notable Clarifications to Directive 077 Requirements
Notable Clarifications to Directive 077 Requirements This summary is provided to assist the reader and is not the official source of the regulaty requirements administered by the ERCB. Readers are reminded
Use of Underwater Dry Welding for In Situ Repair to Offshore Structures. Sabine Powell 02/12/2016
Use of Underwater Dry Welding for In Situ Repair to Offshore Structures Sabine Powell engineering@neptunems.com 02/12/2016 In Situ Welding Steel Structures Suitability of Repair Methods Mobile Offshore
Technical Standard. API6D Ball & Plug Valve. Inspection & Test Procedure
Technical Standard API6D Ball & Plug Valve Inspection & Test Procedure 1 Scope This standard provides specific inspection items to be performed on all ball & plug valves. The valves shall be provided with
NONDESTRUCTIVE INSPECTION OF HULL WELDS
Guide for Nondestructive Inspection of Hull Welds GUIDE FOR NONDESTRUCTIVE INSPECTION OF HULL WELDS FEBRUARY 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York
Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives)
Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on Locomotives) December 5, 1994 TM Rules for the Installation, Inspection and Testing of Air Reservoirs (Other than on
The Need for a New Joining Technology for the Closure Welding of Radioactive Materials Containers
ABSTRACT The Need for a New Joining Technology for the Closure Welding of Radioactive Materials Containers - 9516 G.R. Cannell Fluor Government Group P.O Box 1000, Richland, WA 99352 G.J. Grant Pacific
NOTICE REGARDING CODE CASES OF THE ASME B31 CODE FOR PRESSURE PIPING
NOTICE REGARDING CODE CASES OF THE ASME B31 CODE FOR PRESSURE PIPING All B31 Code Cases in effect as of September 1, 007 will remain available for use unless annulled by the B31 Standards Committee. B31
Pressure Vessel Inspection Code: In-service Inspection, Rating, Repair, and Alteration
Pressure Vessel Inspection Code: In-service Inspection, Rating, Repair, and Alteration API 510 TENTH ELEVENTH EDITION, MAY 2014 ADDENDUM 1, MAY 2017 ADDENDUM 2, MARCH 2018 FIRST BALLOT JUNE 2018 Note to
ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel
1.0 Introduction ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel Katherine Wilson 28 May 2007 To minimize the hazards associated with vacuum and pressure
Ballot ID: Action item Reference Number: Addition of common causes and susceptibility diagram to API RP 581, 3rd Edition, Section 12
Ballot ID: Action item Reference Number: Title Addition of common causes and susceptibility diagram to API RP 581, 3rd Edition, Section 12 Date: October 2018 Purpose: Revision: Impact: Rationale: Technical
P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints
Guideline No.P-04 (201510) P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints Issued date: 20 th October 2015 China Classification Society Foreword This Guideline is a part of CCS
DCV1, DCV3 and DCV3LT Disc Check Valves Installation and Maintenance Instructions
1340050/7 IM-P134-07 CMGT Issue 7 DCV1, DCV3 and DCV3LT Disc Check Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
Liquid Penetrant Procedures TABLE OF CONTENTS
Page: 1 of 8 TABLE OF CONTENTS SECTION PAGE NO. 1.0 Introduction 2 2.0 References 2 3.0 Forms 2 4.0 Personnel Qualifications 3 5.0 Material 3 6.0 Material Restrictions 4 7.0 General Requirements 4 8.0
CNS In-Pool Assembly Mechanical Design for OYSTER Project
CNS In-Pool Assembly Mechanical Design for OYSTER Project JINBOK CHOI, JUNGHYUN RYU Korea Atomic Energy Research Institute (KAERI) 111 Deadeok-daero 989Beon-gil, Yuseong-gu, Daejeon, Republic of Korea
ASME BPVc.m.l.ND-2015
16-2029 11-15-16 page 1 ASME BPVc.m.l.ND-2015 56 An intermediate postweld heat treatment for this purpose is defined as a postweld heat treatment performed on a weld within a temperature range not lower
Design of Pressure vessel for the Hydrocarbon release from the Vent Header Lines
Design of Pressure vessel for the Hydrocarbon release from the Vent Header Lines Bhargav Mangesh Joshi 1 1Student, Department of mechanical engineering, Modern college of engineering, Pune-5 ---------------------------------------------------------------------***---------------------------------------------------------------------
5th Pan American Conference for NDT 2-6 October 2011, Cancun, Mexico. Inspection of Dissimilar Metal Welds in Reactor Pressure Vessels in Spain
5th Pan American Conference for NDT 2-6 October 2011, Cancun, Mexico Inspection of Dissimilar Metal Welds in Reactor Pressure Vessels in Spain J.R. Gadea, J.J. Regidor, J.A. Peláez, P. Serrano Tecnatom,
Electrical. Version 1.0
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
T e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
MU047: Practical Valve Technology: Selection, Installation, Upgrading, Inspection & Troubleshooting MU047 Rev.002 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This five-day intensive course covers