THINK SAFETY - WORK SAFELY
|
|
- Harriet Dorsey
- 6 years ago
- Views:
Transcription
1 - Plot Date: Friday, July 06, 1:52:0 PM Last Saved: Friday, July 06, 1:13:03 PM Last Saved By: Garcia, Felipe File Path: C:\Users\garciafe\documents\S\first Coast Oncology\first Coast Oncology_drawings\FIRST COST ONCOLOGY_Cover.dwg THINK SFETY - WORK SFELY SHEET NUMBER - COVER NEREST EFCO OFFICE: EFCO ORLNDO 1 GILLS DRIVE ORLNDO, FL PHONE: (07) FX: (07) -313 FIRST COST ONCOLOGY EFCO : EFCO DRWING SHEET INDEX SHEET NME EFCO HOME OFFICE: EFCO CORP. 100 N.E. BRODWY DES MOINES, IOW PHONE: (515) FX: (515)
2 '-0" 53'-6" 5'-6" 37'-0" 1'-6" '-0" Plot Date: Friday, July 06, 1:52:0 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 32'-0" 27'-10" 25'-0" 3'-0" 23'-0" '-0" '-0" 6'-" '-0" '-0" 3'-0" PLN VIEW 3 65'- 1/" 69'-" '-3 3/" 7'-0 1/2" 2'-10" 9'-0 1/2" FG 7/6/12
3 PG 7'-0"R 21"CBC 3"RCBC '-0" 3'-0"R HD OUTSIDE NGLE CX-h. (TYP) PG 9'-0"R '-0" 1"Ø X 7'-" PG 9'-0"R 5'-6" 37'-0" 1'-6" Plot Date: Friday, July 06, 1:52:11 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe EL WLL LIGNER (12'+12'+') PG 3'-0"R PG 5'-0"R PG 5'-0"R 32'-0" PG 7'-0"R PG 5'-0"R 3"RCBC 21"CBC 1"CBC 1"Ø X 5'-2" CBC ' VERT CTRS (TYP) SHE-BOLT 1"Ø X 20" (TYP) 3"RCBC 9"CBC 1"CBC 1"Ø X 3'-0" 27'-10" 25'-0" R R 2" CBC 1" CBC 2"CBC/"RDBC 1"Ø X 5'-" CBC STRUT 10"CBC 2"CBC 1"Ø X 3'-" SHE-BOLT 1"Ø X 20" (TYP) R R PG '-0"R 2 WOOD BLOCKING BY CONTR '-0" 3'-0" PG 7'-0"R 1"CBC CBC ' VERT CTRS (TYP) PG 5'-0"R 3"RCBC 21"CBC "CBC 3"RCBC/ 13"CBC PG 5'-0"R '-0" '-0" 1"Ø x 1" B PG 5'-0"R 3'-0" 2'-0" '-0"R EL WLL LIGNER (12'+12'+') 2' VERT CTRS WOOD BULKHED BY CONTRCTOR B 2'-0"R 2"CBC 22"CBC 5'-0" BY-2 - LOCTION OF HEVY DUTY PIPE '-0" (200mm) CENTERS MX. (UNLESS NOTED OTHERWISE - TYP) - LOCTION OF SCFFOLD POST SS-2 & SCFFOLD RM '-0" (200mm) CENTERS MX. (TYP) FG 7/6/12
4 Plot Date: Friday, July 06, 1:52:1 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe NOTE: THIS IS ONLY REQUIRED FOR THE EXTERIOR WLLS WHERE THE WILL BE REQUIRED TO NCHOR THE SLB EDGES FORMS 2'-0" 2'-0" '-0" '-0" '-0" '-0" '-0" X '-0" X 12'-0" X 12'-0" VRIES SECTION X '-0" X 12'-0" X 12'-0" TOP YOKE EVERY TIE LOC (TYP) TTW-5 WSHERS S SPCERS (TYP) SCFFOLD RM: SS-21 & POST: '-0" CTRS. MX. (TYP.) WOOD PLNKING & HNDRIL BY CONTRCTOR (TYP) SHE-BOLT 1"Ø X 20" (TYP) HD PIPE BRCE: 15'-26' (TYP.) 60 MX HD PIPE BRCE SHOE PBS-1. NOTE: THIS IS ONLY REQUIRED FOR THE EXTERIOR WLLS WHERE THE WILL BE REQUIRED TO NCHOR THE SLB EDGES FORMS 60 HD PIPE BRCE SHOE PBS-1. TOP YOKE EVERY TIE LOC (TYP) SCFFOLD RM: SS-21 & POST: '-0" CTRS. MX. (TYP.) WOOD PLNKING & HNDRIL BY CONTRCTOR (TYP) SHE-BOLT 1"Ø X 20" (TYP) HD PIPE BRCE: 15'-26' (TYP.) X 12'-0" X 12'-0" X '-0" X 2'-0" SECTION VRIES B X 12'-0" X 12'-0" X '-0" X 2'-0" 2'-0" '-0" '-0" '-0" '-0" '-0" 3'-0" 5'-0" 30'-0" FG 7/6/12
5 Z-BEM X 12'-0" 37'-0" SUPER STUD X 3'-0" E-BEM X 12'-0" SUPER STUD TO E-Z DECK HED Plot Date: Friday, July 06, 1:52:1 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 32'-0" Z-BEM X '-0" E-BEM X 13'-0" Z-BEM X '-0" E-BEM X 25'-0" PLN VIEW - LYOUT POUR 1 - TOP SLB 2 '-0" '-0" SS HUB 9'-0" SUPER STUD X E-BEM X 12'-0" Z-BEM X 12'-0" Z-BEM X Z-BEM X 12'-0" 3 FG 7/6/12
6 12'-0" SUPER STUD X 3'-0" SUPER STUD TO E-Z DECK HED SS HUB 9'-0" SUPER STUD X E-BEM X 12'-0" Plot Date: Friday, July 06, 1:52:20 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 2 '-0" PLN VIEW - LYOUT POUR 2 '-0" Z-BEM X 12'-0" Z-BEM X Z-BEM X 12'-0" FG 7/6/12
7 37'-0" Z-BEM X 12'-0" SUPER STUD X 3'-0" E-BEM X 12'-0" SUPER STUD TO E-Z DECK HED Plot Date: Friday, July 06, 1:52:2 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe Z-BEM X '-0" E-BEM X 13'-0" E-BEM X 13'-0" E-BEM X 1 E-BEM X 12'-0" E-BEM X 1 PLN VIEW - LYOUT POUR 3 '-0" SS HUB 9'-0" SUPER STUD X E-BEM X 12'-0" Z-BEM X 12'-0" Z-BEM X Z-BEM X 12'-0" 3 FG 7/6/12
8 SS X 12' S SLB EDGE SUPPORT '-0" CTRS Plot Date: Friday, July 06, 1:52:27 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 5'-0" 2'-0" PG X ('+2') 3" DOUBLE Z-BEM PNEL X '-0" SHORT JCK 2'-2" 2'-2" LONG JCK PLYWOOD BY CONTRCTOR (TYP) E-BEM X 12'-0" PNEL X '-0" SECTION POUR '-" " 5'-10" 5'-10" " " 11 1/2" " 5'-" " " 5'-" " " " PLYWOOD BY CONTRCTOR (TYP) PNEL X '-0" SHORT JCK '-" PG X '-0" '-" LONG JCK SUPER STUD PLUMBING SCREW FG 7/6/12
9 Plot Date: Friday, July 06, 1:52:29 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 2'-0" 5'-0" SECTION POUR '-6" " 5'-" " " 10" PLYWOOD BY CONTRCTOR (TYP) Z-BEM PNEL X '-0" SHORT JCK '-" LONG JCK FG 7/6/12
10 5'-0" Plot Date: Friday, July 06, 1:52:31 PM Last Saved: Friday, July 06, 1:51:32 PM Last Saved By: Garcia, Felipe 2'-0" 3'-0" " 10" 2'-3" WOOD BLOCKING BY CONTRCTOR (TYP) Z-BEM X 12'-0" PNEL X '-0" SHORT JCK LONG JCK PLYWOOD BY CONTRCTOR (TYP) E-BEM X 12'-0" PNEL X '-0" SECTION '-3" POUR 3 PLYWOOD BY CONTRCTOR (TYP) PNEL X '-0" SHORT JCK LONG JCK 9'-2 1/2" " 10'-2" " 9'-3 1/2" 30'-0" FG 7/6/12
16" SS CABLE TEE POST 1) STAINLESS STEEL* (STANDARD) *ALL SS IS #6 SATIN FINISH (#8 MIRROR FINISH UPON REQUEST) 2) PVD COATING
RILING OPTIONS ) Ø 2" or 2" SS* 2) Ø 2" WOOD CHERRY RED OK WHITE OK MPLE 3) Ø 2" LED iril 6" SS CBLE 4" MX 3'6" TEE POST ) STINLESS STEEL* (STNDRD) *LL SS IS #6 STIN FINISH (#8 MIRROR FINISH UPON REQUEST)
More information* SEE ANCHOR SCHEDULE SHEET 7
"-20 MLE PNELMTE W/ WINGNUT -1/2" O.C. "-20 X 1/2" MCHINE OLT & NUT -1/2" O.C 04/0/15 JH UPDTE TO 5TH EDITION (2014) FC 8/14/1 Y DTE SPCING ERROR OR MSONRY POWERS CLK-IN W/ "-20 SIDEWLK OLT -1/2" O.C.
More informationGREEN MOUNTAIN POWER CORP.
Exhibit GMP-H-3 GREEN MOUNTIN POWER CORP. PROJECT LOCTION MONTPELIER MRSHFIELD HYDROELECTRIC STTION SERVICE SPILLWY GTE STRUCTURE VERMONT DRWING LIST SHEET NUMBER STTE MP DRWING NME REVISION GENERL PROJECT
More informationNON-TRAP PARASITIC ELEMENTS ELEMENT P-10 10M Reflector 39 10m Rear Driver 28 10M Front Driver 28 10M Director 24
C B REINFORCEMENT TYPE P (SEE DWG. 140009) 36" P-10 COMPONENTS, DIMENSIONS: PRSITIC ELEMENTS REINFORCEMENT TYPE BE (SEE DWG.) B REINFORCEMENT TYPE BC SSY 140019 COMPONENTS, TRP SSEMBLY SLOT WITH SINGLE
More informationLanding Gear Accessories
RIGHT QUALITY RIGHT PRICE RIGHT AWAY Landing Gear Accessories www.goldlinequalityparts.com Edition 2016-02 powered by Introduction, Warranty and Contact Information... 1 Crank Handles 7/8" Dia. Shaft Crank
More informationINSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Non-Refrigerated Universal Bi-Level AquaAccess Barrier Free, Wall Mounted Water Cooler
INSTLLTION, OPERTION ND MINTENNCE INSTRUCTIONS Non-Refrigerated Universal i-level quaccess arrier Free, Wall Mounted Water Cooler OR lternate Configuration Standard Configuration 112100F-UL / 112100-UL
More informationG SERIES METRIC MACHINE SCREW ACTUATOR
G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of
More informationREQUEST FOR COMMENTS
REQUEST FOR COMMENTS NEW UNIFORM STNDRD DRWING NUMER 217.S2, "RESIDENTIL CUR ND GUTTER R-TYPE"; MODIFICTIONS TO STNDRD DRWING NUMERS 223, 224, 226.S1, ND 227.S1 The Specifications Subcommittee of the Regional
More informationDIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE MINIMUM CORE HOLE SIZE TO PULL PUNCHES WITH WINDOWS
MINIMUM CORE HOLE SIZE TO PULL PUNCHES WITH WINDOWS THE MINIMUM DIMENSIONS FOR THE HOLE IN THE PD REQUIRED TO INSERT THE PUNCH-PULLER ND THE BLL-LIFTER RE GIVEN IN THE TBLE BELOW. C CORE HOLE ØB MIN. SECTION
More information10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7
SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting
More informationFREESTANDING WOOD FIRES
FREESTNDING WOOD FIRES F12000HW - USTRLI 2013 Item No. MRKET FUEL TYPE FINISH YER FN 995957 Charcoal VHT Paint U HRDWOOD SEP-2013 Yes 995958 Matt Black Enamel IPL No. : 999173 Issue: Date: Page: 1 of 11
More informationSkills Practice Skills Practice for Lesson 4.1
Skills Prctice Skills Prctice for Lesson.1 Nme Dte Interior nd Exterior Angles of Tringle Tringle Sum, Exterior Angle, nd Exterior Angle Inequlity Theorems Vocbulry Write the term tht best completes ech
More informationPLAN - TYPICAL WETLAND NOT TO SCALE SECTION - TYPICAL WETLAND NOT TO SCALE
INTERNL SIDE SLOPES TO E NO STEEPER THN 9 HORIZONTL TO 1 VERTICL SPILLWY INLET PIPE CONVEYING SH3 RUNOFF OUTLET FOR STREM OUTLET STRUCTURE ROCK PRON MINTENNCE CCESS EMNKMENT PERMELE ROCK FOREY UND WETLND
More informationAutomatic Twin Greasing System
Parts Manual Automatic Twin Greasing System YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm or
More informationSailing Seats. Traditional Rowing Seats
The SILING PEPOD L 6 William C ates L 1 Sailing Seats Traditional Rowing Seats SILING PEPOD design by William C ates Specifications & Salient Features Length Overall: 16 ft 6 - ½ in Maximum eam: 5 ft 1
More informationLCN 1460 SERIES Super Stock
Cylinder Assemblies 1461-3071 Cylinder Assembly F Includes screw pack (SRT standard please specify other) Size 1 cylinder is adjustable from size 1-6 1461-3071DEL Cylinder Assembly w/delay F Includes screw
More informationDual Monitor Desk Mount
Dul Mnitr Desk Munt Instructin Mnul SKU: STAND-V002 Scn the QR cde with yur mbile device r llw the link r helpul vides nd speciictins relted t this prduct. https://viv-us.cm/prducts/stnd-v002 help@viv-us.cm
More informationUNIFORM STANDARD DRAWINGS CLARK COUNTY AREA, NEVADA YEAR 2016 REVISIONS
, NEVD YER 2016 REVISIONS DWG NO. TITLE ND REVISIONS SUMMRY EFFECTIVE DTE 223.1 Residential Driveway without djacent Sidewalk 7/1/2016 New Drawing to allow flexibility in Roadway Design. 234.1 Typical
More informationTYPICAL CARRIAGEWAY SCALE - A3 SIZE
EXISNG SURFE LEVEL SURFE LEVEL m TYPIL. UP TO.m DEPENDENT ON WETHERING DEPTH OF PKIRI FORMON m TYPIL. UP TO 5.m DEPENDENT ON WETHERING DEPTH OF PKIRI FORMON TYPIL UT SEON REFER TO DEL R TYPIL FILL SEON
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS 136 137 TECHNICAL SPECIFICATIONS GROUPSETS 138 SUPER 141 144 CHORUS 146 ATHENA 148 CENTAUR 10 veloce 12 pista 13 TIME TRIAL 14 COMP TRIPLE 1 CX WHEELS 16 Low / High-Profile 18
More informationCHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
More informationSkills Practice Skills Practice for Lesson 4.1
Skills Prctice Skills Prctice for Lesson.1 Nme Dte Interior nd Exterior Angles of Tringle Tringle Sum, Exterior Angle, nd Exterior Angle Inequlity Theorems Vocbulry Write the term tht best completes ech
More informationHEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION
901020 - HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION www.gillathletics.com 800-637-3090 Install the pipe cap (PCAP00158002) at the top of the net pole. Install net pole pulley (73210042)
More informationLEGACY II TM STARTING PLATFORMS
LEGACY II TM STARTING PLATFORMS INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationReplaces Lesco 300 & 500 Parts
Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R
More informationFFP bow mount anchor nests
FFP bow mount anchor nests 208-580-1904 www.fishfighterproducts.com relentlessly in the PURSUIT OF BIG FISH www.fishfighterproducts.com TABLE OF CONTENTS Bow Mount Anchor Nests...Pgs. 1 Bow Mount Anchor
More informationSIX CYLINDER RADIAL STEAM ENGINE WITH SLIDE VALVES GENERAL ARRANGEMENT IF NOT STATED ALL CHAMFERS ARE 0.2mmx45
/// IF IN DOUBT SK REMOVE LL BURRS ND SHRP EDGES 0 QTY. PRT NUMBER 0-BSE 0-BSE PLTE 0-SPCER PLTE -SIDE PLTE -SIDE PLTE -CRNK SHFT BERING 0-FLYWHEEL INNER 0-FLYWHEEL HUB -FLYWHEEL HUB PINS -CRNK SHFT -CRNK
More informationInnovative, Labor Saving Solutions
Resource Manual Innovative, Labor Saving Solutions Designed by professionals for professionals! Features and Benefits Jobsite Problems / s Product Overview Ordering Made Easy CONSTRUCTION ENGINEERED ATTACHMENT
More informationAPI HPHT 6BX Flange Design, Verification & Capabilities: Example use of Methodology
API HPHT 6BX Flange Design, Verification & Capabilities: Example use of Methodology January 22 nd, 2018 Summary 1. Determine the suitability of the existing BX gaskets for 20K 2. Use Robert Eichenberg
More informationGary L. Owens Trust Administrative Permit. Application
Gary L. Owens Trust dministrative Permit pplication SITE PLN NOTES PN: 007 OWNER: GRY L OWENS STORGE / MECHNICL FINISH FLOOR = 69' (E) POWER POLE WITH HIGH VOLTGE FEED 68 68 690.THERE IS N EXISTING WELL
More informationa division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
More informationPARK HILL HIGH SCHOOL TURF FIELD IMPROVEMENTS
PK HILL HIGH SCHOOL TUF FIELD IMPOVEMENTS 8150 N CONGESS VENUE, KNSS CITY, MO 64152 7701 NW BY OD PK HILL HIGH SCHOOL I ON NG L E TUF FIELD IMPOVEMENTS OVELL SITE PLN FE IN P O O SS MI S S EE TE I U ST
More informationLARGE BINOCULAR TELESCOPE 2 x 8.4M TELESCOPE SAFFORD, ARIZONA
REV DESCRIPTION DTE REVISED BY PPROVED INITIL RELESE 05/21/07 V. GSHO V. GSHO 2 x 8.4M TELESCOPE SFFORD, RIZON DYNMIC BLNCING PIPING INSTLLTION OWNER Ph. 1 520 626-5231 Fax. 1 520 621-9843 LOCTION MP P
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
More information32" & 36" CUTTER DECKS
2 32" & 36" CUTTER DECKS 20 21 22 21 20 24 23 18 25 37 26 27 28 29 30 31 33 4 34 32 31 35 1 36 38 45 43 42 44 45 43 46 44 59 60 58 9 48 2 58 22 42 50 52 51 49 41 69 49 SC409G99 8 62 5 22 3 65 63 6 66 67
More informationTHIS DOCUMENT, TOGETHER WITH THE CONCEPTS AND DESIGNS PRESENTED HEREIN, AS AN INSTRUMENT OF SERVICE, IS INTENDED ONLY FOR THE SPECIFIC PURPOSE AND CLIENT FOR WHICH IT WAS PREPARED. REUSE OF AND IMPROPER
More informationMethylethycetone (MEC) - PMS 60 polyurethane glue - Grease - White silicone
CHAPTER PLAN page : 1/8 SAILING BOAT SUSPENDED WITHOUT DECK BEARING SAILING BOAT SUSPENDED WITH DECK BEARING SAILING BOAT SUSPENDED WITH AUTOMATIC BEARING ALIGNMENT RUDDER SYSTEM FOR ANTARES MOTOR BOAT
More informationInstallation. Heat Trace Combination Drench Shower and Eyewash Unit (includes 120 V and 208/240 V versions) S19-304GA
Heat Trace Combination Drench Shower and Eyewash Unit (includes 120 V and 208/240 V versions) Top or Bottom Supply General Area Table of Contents Pre-Installation Information... 2-3 Components...4 Supplies
More informationHD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING
FLOT SWITH DN50 upv PRESSURE FOR SENSOR TUING ( OVER) REFER TO 4 ND FLOT SWITH (50%) DN80 upv SUTION (600 OVER) GRVITY SEWER MINS FLL TOWRDS SUMP REFER TO NOTE 9 PLN (OVERS REMOVED) SLIDE GTE VLVE ± HMER
More informationaccessories cleats shackle & pad-eyes toe-rail roller bearings promotional items model index...
accessories cleats... 174 shackle & pad-eyes... 176 toe-rail... 178 roller bearings... 179 promotional items... 180 model index...188-173 - roller cleat mod. RC280/SI mod. RC280/ 1. 2. 3. 4. Roller is
More informationLeft Side Discharge Parts Manual
430-340-250 Left Side Discharge Parts Manual Table Of Contents Page Content 1 EXTERNAL FRONT ILLUSTRATION 2 EXTERNAL FRONT 3 PTO 4 PTO DRIVE LINE 5 SCALE SUPPORT ASSEMBLY 6 BOTTOM FRONT PTO DRIVE ASSEMBLY
More informationMISSISSIPPI RIVER SPILLWAY PLAN (2013 FLOOD RECOVERY) MISSISSIPPI RIVER SPILLWAY PROFILE (2013 FLOOD RECOVERY) C-200 PROJECT BOUNDARY
c:\pw_working\mvr\b5eddlh\d032060\_-200xxx.dgn $TE$ 5E 9:6:5 M N 37+00 372+00 373+00 37+00 PO N 3397.37 E 23639.0 535.90 537.6 535.8 535.27 535.2 535.07 H:V 50H:V 375+00 5H:V 376+00 5H:V H:V 3H:V PROJET
More informationActivity Based - Risk Assessment Report
Company : IDMC PTE TD CHOO'- PHAE 2 Approved by : K.W. Ten (Project Manager) ast Review Date : Chan Bok eng (ite Manager) Next Review Date : Trade / Activities: Mechanical ystem -Install Big Ass Fans 1
More information400/488 Rotating Davit Installation Instructions
400/488 Rotating Davit Installation Instructions These instructions were written with the owner in mind. If you are the installer make sure these instructions are passed along to the owner of the boat.
More informationbuilt build to TRENCHLINING DOWN A CAISSON
uilt build to TRENCHLINING DOWN A CAISSON TRENCHLINING Trenchlining_DOWN A CAISSON DOWN A CAISSON CHARACTERISTICS Base panel 315x230 (815 kg) and 415x230 (1018 kg). Super-elevation panel 315x120 (511
More informationNominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm
(DN25) 1.5" (DN40) (DN100) (DN150) (DN200) (DN250) (DN300) 1 (DN350) (DN400) 1 (DN450) (DN500) 2 (DN600) 3 (DN900) 4 (DN1200) 5 (DN1350) O.D. 2.50" 10.8 15.3 43.3 64mm 1 C 2 2 2 L Minimum L 0.7 1.0 1.3
More informationRocky Mountain Element Technical Manual. Rev B
Rocky Mountain Element Technical Manual Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions... 6 1) Bearing Installation...
More informationMaterials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
More information400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L
User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: www.ergotron.om 1 of 10 Hzrd Symols Review These symols lert
More informationWHEEL PARTS & ACCESSORIES
WHEEL PARTS & ACCESSORIES Table of Contents What You Need to Know...1 Snap-On & Universal Products...2-3 Dodge/International Products... 4-5 Ford Products... 6-10 General Motors Products... 11-13 Heavy
More informationMETRIC TOLERANCE DATA & STANDARD SPECIFICATION MATERIAL TOLERANCE HEAT TREAT
Metric Fixture Pins METRIC TOLERNCE T & STNR SPECIFICTION MTERIL TOLERNCE HET TRET HRENE & ROUN 8620 STINLESS 300 SERIES MIL STEEL 8620 PREHRENE 311 &P 12mm I OR LESS R C 50-52.6 -.9 EEP 16mm I N UP R
More informationC-M Precast Traffic Islands Index
C-M Precast Traffic Islands Index Selecting Left or Right Hand Islands Product Range Splitter Islands Single Splitter Islands 1072 Chicane Splitter Islands 1075 Pedestrian Refuge 1082 Tweed Pedestrian
More informationTECHNICAL HANDBOOK nvent CADDY Speed Link Manual. SLS Locking Device
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual SLS Locking Device Contents 1. WIRE ROPE SUPPORT OVERVIEW 3 A. Using Wire Rope 3 B. The nvent CADDY Speed Link Manual 3 C. SLS Features 4 D. SLS Mechanism
More informationGB Collins Engineering PA
FENCE: Florida Building Code requires that all public pools shall be surrounded by a minimum 48" high fence. The fence shall be continuous around the perimeter of the pool area that is not otherwise blocked
More informationRiggers and Associated Parts
Riggers and Associated Parts Pins are all 13mm shafts, with 8x27mm tops, and supplied with washers, nuts and spacers. Rig 1A-sc 13x105mm shaft, 10x55mm base - for scull & sweep Carbon wing S/S yes 28.57
More informationHydraulic Damper (HB) 07/2011
e l b a t adjus Hydraulic Damper (HB) EL2 = 2x + 40 M5x5 Ø15 Ø6 M5x5 Size 6/15 : (Extension and compression force 20N to 800N) size EL1 V0 V0 A 6 100 240* V0 = Thread V0 = Thread 6 = 6/15 25 90* S2 = S2
More informationNEW SINGLE FAMILY, RUGGIERO WAY, ANDOVER, MA
NEW SINGLE FMILY, RUGGIERO WY, Sheet Number DRWING LIST Sheet Name CS COVER SEET 00 Site Plan 0 FOUNDTION PERIMETER 0 PLNS 0 PLNS 04 PLNS 05 LIGTING PLNS 0 EXTERIOR ELEVTIONS 0 EXTERIOR ELEVTIONS 0 EXTERIOR
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles oded Switches Features/Benefits PB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS ompliant Typical Applications
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More information80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES
OPERATOR S MANUAL FOR MORSE Model 80A and 80A-M for 55 gallon standard steel drums (22½ diameter) Model 80C for steel or fiber drums (21-23 diameter) Model 80i for 55 gallon steel drum (22-½ diameter).
More information64203 w/5 Spring External Pivots & Single Stage Tower Single Stage Tower, External Pivots, Up To 24 of Tarp
Roll Off Hook Lift System 64203 w/5 Spring External Pivots & Single Stage Tower Single Stage Tower, External Pivots, Up To 24 of Tarp 2014 Roll Rite, LLC, All Rights Reserved Welcome to Roll Rite Automated
More informationFirst Aid in School Policy
First Aid in School Policy Approved y the Governing Body of West Monkton Church of Englnd Primry School: Reviewed y Governors nd Agreed: Septemer 2017 At West Monkton we im to e n inspirtionl community,
More informationLAZY RIVER 3 3 PUMP LOCATION
.0 1 TEE WITH () " RETURN NOZZLE 1 1.0 10" OR 1 SCH 0 PVC PIPE RETURN WITH ACCELERATOR NOZZLE 2 LAZY RIVER PUMP LOCATION PUMP LOCATION PRELIMINARY SITE LAYOUT AND PUMP LOCATION 1 DETERMINE CURRENT RETURN
More informationQuick Start SunPump Install
Quick Start SunPump Install Make A Plan Visualize the complete install. The first step is to commit a plan to paper by a simplified sketch. Where is the best location for the Panels? What is the preferred
More informationOwners Manual Bottle Filler Freeze Resistant Tubular Fountain & Pet Fountain with 98837C Dual Valve Control Assembly
LK Owners Manual 4420 Bottle Filler Freeze Resistant Tubular Fountain & Pet Fountain with 98837C Dual Valve Control ssembly MODEL 4420BF1UDBFR MODEL 4420BF1LDBFR ITLLER 4420DBBFFR Fountains are among the
More informationMEASURING GUIDE CUSTOM SAFETY COVER. Please Submit this form as: Cover Style - Mesh. Contact Information. Cover Style - Solid
CUSTOM SFETY COVER MESURING GUIDE Please Submit this form as: Quote Only Order Order No. Questions? Phone 1-855-467-4224 (toll free Monday-Friday 9am-5pm EST) FX 1-781-848-0507 or email us at customerservice@thepoolcenters.com
More informationNEEDLE VALVES TYPE RA
R NL VLVS TYP R The products are included in pressure adjusting accessories class. They are designed according to main requests regarding the security assurance of the pressure equipment users, mentioned
More informationMEASURING GUIDE CUSTOM SAFETY COVER. Please Submit this form as: Cover Style - Mesh
CUSTOM SFETY COVER MESURING GUIDE Please Submit this form as: Quote Only Order Order No. Questions? Phone 1-844-878-2964 (toll free Monday-Friday 9am-5pm EST) FX 1-781-848-0507 or email us at care@wholesalepoolcovers.com
More informationLCN 4040 SERIES SUPER SMOOTHEE
Cylinder Assemblies 4041-3071 Cylinder Assembly F Includes screw pack (SRT standard please specify other) Size 1 cylinder is adjustable from size 1-6 4041-3071DEL Cylinder Assembly w/delay F Includes screw
More informationK Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
More informationDuke Street (Route 236) Over I Bridge Plan & Elevation
Duke Street (Route 236) Over I-395 - ridge Plan & Elevation ity of Alexandria Exist. sign structure supports on bridge fascia to be removed in 395 express lanes project Abutment A Sta. 102+03.02 E 41-1"
More informationMaterials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Flanges RF CLASS 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Rising non rotating stem
More informationMAXIM 3000 MAJOR ASSEMBLY
30 2012 Parts Catalog MAXIM 3000 MAJOR ASSEMBLY MAXIM 3000 COLOR CHART GREY DOOR & VIP ONLY TEAL ROYAL BLUE SAND FOREST GREEN GRANITE DOOR ASSY PART# 17594 17592 17593 17589 17591 17590 RIGHT PANEL ASSY
More informationFOODSERVICE PLAN ONTARIO SD ONTARIO HS FS1.01 FOOD SERVICE EQUIPMENT LIST FOODSERVICE LAYOUT ITEM QUANTITY. Continental Refrigerator
FOOD SERVICE EQUIPMENT LIST FS3.03 0 9 9 8 8. 6 5 4 3 G D 4 5 6 9 8 6 5 4 3 FS3.0 FOODSERVICE PLN /4" = '-0" 4' - /3" FS3.0 FS3.0 Electrical Panel ITEM QUNTITY NO QTY LOT DESCRIPTION MNUFCTURER HETED CBINET,
More informationSGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility
More informationKOHU 6 M / 32-2 *** PILOT OPERATED CHECK VALVES KOHU6M/ ORDERING ORDERING DIMENSIONS ORDERING ORDERING CODE SYMBOL
Ø DESCRIION mdular munting- KOHU6M/32-... in ne directin freely ( t, t ) and at availability f cntrl signal in the ppsite directin ( t, t ). he valve ensures hydraulic lcking f the rvides their stability
More information340/430 Truck Mount Parts Manual
340/430 Truck Mount Parts Manual Table Of Contents Page Content 1 EXTERNAL BACK ILLUSTRATION 2 EXTERNAL BACK 3 MAIN HYDRAULIC DRIVE 4 BOTTOM REAR PTO DRIVE ASSEMBLY 5 REAR SPEED REDUCTION & TUMBLER DRIVE
More informationINSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN
INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l
More informationTRAFFIC IMPACT ANALYSIS For Bradfield Elementary School In Highland Park, Texas
TRFFIC IMPCT NLYSIS For Bradfield Elementary School In Highland Park, Texas EXECUTIVE SUMMRY The purpose of conducting this Traffic Impact nalysis (TI) was to evaluate the existing vehicular conditions
More informationDELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS
DELUXE LOW PROFILE 18 & 30 STARTING PLATFORMS INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationProgression 24LD Stern Drive
Progression 24LD Stern Drive This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 24LD. As you compare Progression s many superior features to the competition,
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES SZ)
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES ) Double-acting. Spring closed (upon request). Patented self-centering system. Multiple mounting and porting options. Optional magnetic sensors.
More informationSECTION 23iS/U: SIDE SKINS
SECTION 23iS/U: SIDE SKINS F-1203G-R BULKHEAD SIDE CHANNEL F-01248-R-1 ARM REST F-01205D SEAT BACK ADJUSTMENT GUIDE, 4 PLACES F-01205B-1 ROLL BAR ATTACH PLATE, F-01248B-1 FUSELAGE PIN LATCH, F-01204J BULKHEAD
More informationAmerican Flagpole & Flag Co. 1(800)
SENTRY CONCEALED HALYARD-REVOLVING TRUCK GROUND SET INSTALLATIONS INSTRUCTIONS 1. Dig foundation as detailed in SECTION A FOUNDATION SPECIFICATIONS, set sleeve in enter of hole with top 2 above grade.
More informationSEADUCER BOATS GAS SPORT HYDRO
SEADUCER BOATS GAS SPORT HYDRO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 2 - Pkg. Of 440 push rod ends 2 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 30" flex
More informationMATHEMATICAL PRACTICES In the Solve It, you used what you know about triangles to find missing lengths. Key Concept Law of Sines
8-5 -20-5 Lw of Sines ontent Stndrds G.SRT.11 Understnd nd ppl the Lw of Sines... to find unknown mesurements in right nd non-right tringles... lso G.SRT.10 Ojetives To ppl the Lw of Sines 66 ft 35 135
More informationChannel Nuts & Hardware
Channel Nuts Channel nuts are one of the main components of our strut system. It is designed to provide essential gripping power and ease during installation. Channel nuts are press formed, machined and
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationMAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS In-ground or surface mount Impact Recovery System protects foundations from damage when bollards are impacted, need replacing or upgrading. Surface mount version uses Impact resistant
More informationLOT 2 PEDRICK-ECKERD FILING NO. 3
SITE WG NO. RWING TITLE LOT PERIK-EKER FILING NO. 67 SEURITY LV OLORO SPRINGS, O 809 OF TITLE SHEET OF EVELOPMENT PLN OF EVELOPMENT ETILS OF PRELIMINRY UTILITY N PULI FILITY PLN OF PRELIMINRY GRING PLN
More informationStation class Codes Services Geographical Area Codes FIXED MOBILE RADIOLOCATION FIXED MOBILE
Bands (considered to be) Shared on an Equal Basis Between Space and Terrestrial Services - Region 2 Source: RR2016 Art 5, Art 9, Art 21, App 5, App 7, Rules of Procedure 2012 Rev. 3 Lower 137 137.025 FB,
More informationRock. ky Altit. ude. Rev B
Rock ky Mountain Altit ude Technical Manual Date: August 17 th, 2016 Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions...
More informationHALF GONDOLA / END DISPLAY
HALF GONDOLA / END DISPLAY D End display / half-island, free standing. Consisting of: Upright, foot, footcover, kickplate, base shelf with or without label moulding, bottom tie bar, galvanized crossbar,
More information* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE
* MXIMUM LNDING IS 2.0% IN ECH DIRECTION OF TRVEL. LNDING MINIMUM DIMENSIONS 5' x 5'. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). "NON-WLKING" RE * LNDING 24" CROSS FULL WIDTH PERMNENT
More informationPasture Meter Auto Lift Kit 5003 (Leaflet Pt.No Issue 4, October 2015)
Pasture Meter Auto Lift Kit 5003 (Leaflet Pt.No.2400-1210 Issue 4, October 2015) DESCRIPTION The C-Dax Auto lift kit is an optional extra for the C-Dax Pasture Meter and raises/lowers the pasture meter
More informationAssembly Instructions
Audi A4 Audi A5 Audi S4 Audi S5 Assembly Instructions for Version 07.03.2014 for for Vehicles: Assembly time: Audi A4, A5, S4, S5 approx. 120 min Attention: To guarantee optimal function and security of
More information