Innovative, Labor Saving Solutions

Transcription

1 Resource Manual Innovative, Labor Saving Solutions Designed by professionals for professionals! Features and Benefits Jobsite Problems / s Product Overview Ordering Made Easy CONSTRUCTION ENGINEERED ATTACHMENT SOLUTIONS A Division of Tomarco Contractor Specialties ceasattachments.com (877) GOO-CEAS (877)

2 Innovation Since 1977 The Stiffy Concept - Introduction Labor Saving Attachment Solutions Introduction Stiffys work because they are innovative solutions designed on real-world job sites. Stiffys save install time and frustration, mitigate injury and most of all - SAVE MONEY to INCREASE YOUR BOTTOM LINE! The CEAS manufacturing department can turn a conceptual design into a prototype in as little as 24 hours, complete with approved structural engineer submittals. That s unheard of anywhere else and is a service CEAS prides itself on as the leader in the industry. CEAS offers installers a wide array of custom support solutions for Electrical, Low Voltage, Cast-in-place and Slabon-grade supports for concrete, metal/steel and wood applications. Each Stiffy support is made specifically to order and ships from our manufacturing facility within 24 to 48 hours. This enables contractors to custom tailor their support packages for each project and take delivery on a just-in-time basis. During the preconstruction phase of your next project, contact your local CEAS distributor. Whether it is overhead, below a computer floor, mounted to a wall or cast into concrete, CEAS will help to create the most labor saving and cost effective engineered attachment solution specific to your application. At a glance Pre-assembled - Designed, Engineered and Built as an assembly to dramatically reduce installation times Stamped submittals - Project specific submittals are created and stamped by a PE Simplify installations - Designed to combine multiple installation steps into a single assembly Ordering made easy - Every order is custom, simply select support, select options and customize dimensions Attachment options for any substrate - Concrete, Steel, Wood and Dirt connections In-house witnessed UL testing Buy American Act Compliant Jobsite Problems - s Ordering Made Easy Fastener & Options Product Overview Jobsite Problems - s Ordering Made Easy Fastener & Options Product Overview Pg. 2 Pg. 3 Pg. 4 Pg. 5 Pg. 6 Pg. 7 Pg. 4 Pg. 8 Reference for both 100 and 200 series Jobsite Problems - s Ordering Made Easy Product Overview Pg. 9 Pg. 10 Pg. 11 Jobsite Problems - s Ordering Made Easy Product Overview Pg. 12 Pg. 13 Pg. 14 1

3 Jobsite Problems - s Real-world Jobsite Innovation Job Site Problem 1 Ceiling wire using bat wing clips Job Site Problem 2 Pin, CADDY 708AB, Pencil Rod and CADDY MCS100 Fig 101 Stiffy Stacker CADDY MCS50 (Max 4 MC), MCS100 (Max 8 MC), MCS 101 (Max 7 MC) Fasteners are Engineered pre-assembled to the support Job Site Problem 1 Step 1 - Install Ceiling Wire Step 2 - Climb up a ladder and attach each individual MC cable Step 3 - Return to the location (after T-bar Grid is installed), climb a ladder & attach the banana clip. (Per NEC ) Step 4 - Tie the ceiling wire to the clip Job Site Problem 2 Step 1 - Assemble components (Cut Rod, Attach Clip, Insert Fastener) Step 2 - Install Pencil Rod Assembly Step 3 - Climb up a ladder and attach each individual MC Support Step 4 - Climb up a ladder and attach each individual MC Cable Step 1 - Install Fig 101 Stiffy Stacker from the ground using a pole tool Step 2 - Install the MC or EMT into the support and pull down the restraint washer. It doesn t get any easier than this... Job Site Problem 1 Job Site Problem 2 Engineered as an assembly Can be ordered for multiple sizes of MC and EMT UL Listed for MC and EMT NEC compliant Pre-staked with several Engineered Attachment options UL listed engineered attachment options for concrete, wood, metal and steel Quick to install. Only when a Banana Clip is used to secure the wire to the T-bar Grid.. Very labor intensive to install the batwing clips. Also, per NEC the ceiling wire must be secured at the top as well as bottom which requires a second trip to the same location. Just small MC. t available for EMT.. First the pin, clip and rod have to be cut and assembled. Then the MCS100s are attached. Finally 2

4 Stiffy 100 Series Ordering Custom Ordered - Complete Assemblies Designed and Engineered by Professionals for Professionals Easy as 1, 2, 3 Pre-assembled - Reduced installation times Reduces inventory - Reduced confusion on job sites Engineered submittals - Stamped by an engineer Simplify installations - Designed to combine multiple installation steps into a single assembly Attachment options for any application - Concrete, metal and wood In-house witnessed UL testing Buy American Act Compliant To download specific product order forms, or to order online, go to CEASattachments.com B - Select Option (Example shown = *01) A - Select Fastener Option (Example shown = *01) Ordering Grid - Options as Shown on Individual Order Forms C Select Drop Length Example = 18 *00 *01 *02 *03 *03.1 *04 *04.1 *06 *07 *08 *09 *13 *14 *16 *17 *25 A Fastener 1-1/4 Power Actuated Pin 1 Embedment 1-1/2 Power Actuated Pin 1-1/4 Embed 1/4 x 3-1/4 Wedge Anchor (2 Embed) 3/8 x 3 Wedge Anchor (2 Embed) 1/4 x 1-3/4 Concrete Screw Anchor 3/8 x 1-3/4 Concrete Screw Anchor #10 Hex Washer Head Self Driller #10 Hex Washer Head Sharp Point Timberpin (Wood Applications) Wide Mouth Beam Clamp 1-1/4 PowderPuff Pin 1 Embedment Stiffy Wood Pull Down Attachment Hammer-on Beam Clamp 1/8-3/4 Flange Bar Joist Pull Down Clamp 1/16-1/4 Flange Other Please Specify *01 90º *012 Gas Tool *03 B Threaded End (1/2 of Threads) NOTE (A) Fastener Options - Refer to Page 4 for Details. NOTE (B) Options - Refer to Page 4 for Details. Example Form Results *011 Hard Concrete *02 Sidemount *04 Straight Rod *10 Other-Please Specify C Drop Lenth (Inches) D Safety End Cap *01 *02 A B C D Qty Fig D Safety End Cap (Shown = *01) Order Example - Stiffy Fig

5 A - Fastener Options for 100 & 200 Attachments for any application *01 & *02 Powers Power Actuated Fasteners *03 & *031 Powers SD1 Wedge Anchor *04 & *041 Powers Wedge Bolt *13 CEAS PowderPuff Power Actuated Fasteners *07 Hex Washer Head Sharp Point Screw *08 Timber Pin PAT Fastener *14 Stiffy Wood Pull Down Clamp STEEL METAL *17 Stiffy Pull Down J-Clip *06 Hex Washer Head Self Drilling Screw *07 Hex Washer Head Sharp Point Screw *09 Wide Mouth Beam Clamp *12 Hammer-on Beam Clamp 360 *16 Stiffy Hammer-on Beam Clamp B - Options for 100 & 200 Illustrations are not to scale. *01 90 Angle Example Shown *07 Fastener Hex Washer Head Sharp Point Screw in Wood *011 Hard Concrete Example Shown *01 Fastener 1-1/4 Pin in Concrete *012 Gas Tool Example Shown *01 Fastener 1-1/4 Pin in Concrete *02 Side Mount Example Shown *01 Fastener 1-1/4 Pin in Concrete *03 Threaded End Example Shown in BLue Banger Hanger with Poured Concrete *04 Straight Rod Example Shown with *12 Hammer-on Beam Clamp 360 4

6 Stiffy 100 Series Overview Product Index Fig. 100 thru 119 Single Hung Stiffy Supports Fig. 100 Stiffy Straight Rod Fig 101 Stiffy Stacker Fig 102 Threaded Stiffy Fig 104 Threaded Stiffy with Hanger Fig 105 Threaded Stiffy with New Hard Concrete Fig 106 Stiffy Temp Power Support Fig. 120 thru 139 Stiffy s Fig 120 Stiffy Crossbar Fig 121 Stiffy Fig 123 Stiffy Cradle Crossbar Fig 124 Stiffy Snap-in Fig 125 Stiffy Strut Stiffy s (Cont.) Box Supports Fig 127 Stiffy Wall Mounted Snapin Fig 128 Stiffy Snap-in Wall Rack Fig 129 Stiffy HD Crossbar Fig 130 Stiffy HD 2-Tier Crossbar Fig 140 Stiffy Multi Stacker Support Fig. 160 thru 199 Misc Supports 5 Fig 160 Stiffy Stud Spanner Fig 161 Stiffy Gripper Fig 162 Fixed Stiffy Stud Spanner Fig 163 Adjustable Stud Spanner

7 Jobsite Problems - s Real-world Jobsite Innovation Job Site Problem Typical T-Bar Installation Fig 200 Comfort Cradle Job Site Problem Step 1 - Install Ceiling Wire Step 2 - Climb up a ladder and attach the data support Step 3 - Climb up a ladder and install the cable Step 4 - Install Restraint Clip Step 5 - Return to the location (after the T-bar Grid is installed), climb a ladder and attach the banana clip. (Per NEC ) Step 6 - Tie the ceiling wire to the clip Installer must revisit every support Step 1 - Install the Stiffy from the ground Pre-assembled Saves labor Step 2 - PULL the cable through the Stiffy need to revisit - The rigid connection to the structure satisfies the requirements of NEC It doesn t get any easier than this... Job Site Problem Engineered as an assembly NEC compliant Pre-staked with several Engineered Attachment options UL listed engineered attachment options for concrete, wood, metal and steel Quick to install. Only when a Banana Clip is used to secure the wire to the T-bar Grid.. Very labor intensive to install the batwing clips. Also, per NEC the ceiling wire must be secured at the top as well as bottom which requires a second trip to the same location. 6

8 Stiffy 200 Series Ordering Custom Ordered - Complete Assemblies Designed and Engineered by Professionals for Professionals A - Select Fastener Option (Example shown = *01) B - Select Option (Example shown = *011) C Select Drop Length Example = 9 D - Select Cradle Dimension and Color (Example shown = *02B) Easy as 1, 2, 3 2 Wide Bearing Surface - Provides an exceptional support for more sensitive cables Plenum Rated Plastic - Approved for use in plenum environments Self closing latch - Ensures that all cables are secured without using tie wraps Reduce installation steps - Reduce installation time Available in Red, White, Blue, Green and Yellow - Allows for separation of systems Pre-assembled - more time wasted in the field assembling multiple components Stamped Submittals - Project specific submittals stamped by an Engineer Attachment options for any application - Concrete, metal and wood In-house witnessed UL testing Buy American Act Compliant To download specific product order forms, or to order online, go to CEASattachments.com Ordering Grid - Options as Shown on Individual Order Forms *00 *01 *02 *03 *03.1 *04 *04.1 *06 *07 *08 *09 *12 *13 *14 *16 *17 *25 A Fastener 1-1/4 Power Actuated Pin 1 Embedment 1-1/2 Power Actuated Pin 1-1/4 Embed 1/4 x 3-1/4 Wedge Anchor (2 Embed) 3/8 x 3 Wedge Anchor (2 Embed) 1/4 x 1-3/4 Concrete Screw Anchor 3/8 x 1-3/4 Concrete Screw Anchor #10 Hex Washer Head Self Driller #10 Hex Washer Head Sharp Point Timberpin (Wood Applications) Wide Mouth Beam Clamp Adjustable Hammer-on BC Rotates 360º Specify Flange Thickness) 1-1/4 PowderPuff Pin 1 Embedment Stiffy Wood Pull Down Attachment Hammer-on Beam Clamp 1/8-3/4 Flange Bar Joist Pull Down Clamp 1/16-1/4 Flange Other Please Specify *01 90º *012 Gas Tool *03 B Threaded End (1/2 of Threads) *011 Hard Concrete *02 Sidemount *04 Straight Rod *10 Other-Please Specify C Drop Lenth (Inches) Dimensions: 1 Cradle 2 Cradle 6 Cradle 3-1/2 Cradle *01 *02 *03 *04 R B G Y D 1 Cradle 2 Cradle 3-1/2 Cradle 6 Cradle Red Blue Green Yellow *Standard cradles come in white. Specify custom colors. Example: 02 = White 2 Cradle 02R = Red 2 Cradle NOTE (A) Fastener Options - Refer to Page 4 for Details. NOTE (B) Options - Refer to Page 4 for Details. Example Form Results 7 A B C D Qty Fig B 500 Order Example - Stiffy Fig. 200

9 Stiffy 200 Series Overview Product Index Fig. 200 thru 219 Stiffys with Comfort Cradles Fig 200 Stiffy with Comfort Cradle Fig 201 Stiffy Clip-on Comfort Cradle Fig 202 Stiffy Wall Rack Support Fig 203 Stiffy Fixed Wall Rack Support Fig 204 Stiffy Double Wall Rack Support Fig 206 Stiffy Data Tree Fig Stiffy Shorty Comfort Cradle Detail #1 Fastner Detail #2 #10 x 2-1/2 Hex Washer Head Self Driller Detail #3 #10 x 2-1/2 Hex Washer Head Sharp Point Detail #4 Wide Mouth Beam Clamp Detail #5 Wide Mouth Beam Clamp - Rotates 360 Detail #6 Hammer-on Beam Clamp Detail #7 Hammer-on Beam Clamp Rotates 360 Detail #8 Bar Joist Pull Down Clamp 1/16-1/4 Flange Detail #9 Under Floor Support to 3/4 dia. Round Pedestal Detail #10 Under Floor Support to Pedestal - Universal Detail #11 Stiffy Hammer-on Beam Clamp 1/8-1/4 Flange Detail #12 Stiffy Pull Down Beam Clamp 1/16-1/4 Flange Detail #13 Wood Pull Down Beam Clamp - minal 2 Lumber Detail #14 Flat Mount with Fastener Detail #15 Flat Mount w/fastener #10 x 2-1/2 Hex Washer Head Self Driller Detail #16 #10 x 2-1/2 Hex Washer Head Sharp Point Fig. 220 thru 239 Low Voltage s Fig 220 Stiffy Low Voltage Fig 222 Stiffy LV Triangle Fig 223 Stiffy Wall Mount Fig 224 Stiffy Wall Mount Fig. 240 thru 259 Misc Low Voltage Supports Order Online Fig 240 Bridle Ring Stiffy Fig 241 Stiffy D-Ring 8

10 Jobsite Problems - s Real-world Jobsite Innovation Job Site Problem Typical Wire Installation Fig 302 Stiffy Tree Job Site Problem 1 Decks are clear Step 1 - Perform Layout 1st layer of rebar installed Step 2 - Install horizontal conduit 2nd layer of rebar installed Step 3 - Return to each location when the decks are most dangerous and find tie wire and scrap material Installer must revisit every support Dangerous tripping hazard Decks are clear Step 1 - Perform Layout and install all of the Stiffy Supports with the 90s 1st layer of rebar installed Step 2 - Install horizontal conduit It doesn t get any easier than this... Job Site Problem Promotes a safe work environment Quick to install Eliminates support revisit Additional Benefits - This method puts the installer at an increased risk for trip and impalement hazards - It is labor intensive to install tie wire and come up with supports on a deck - Installer must revisit each location after the second layer of rebar is installed - The supports are installed when the decks are clear thereby reducing the risks of injury - Install supports that securely hold pipes and boxes in place without costly and dangerous re-work with tie wire Supports 90s, Deck Sleeves and more 9

11 Stiffy 300 Series Ordering Custom Ordered - Complete Assemblies Eliminates revisiting decks prior to pour Safety - Perform all layouts on clean deck before first layer of rebar Pre-assembled - Designed to combine multiple installation steps to save labor Available with the Stiffy Sock plastic foot: Provides a uniform opening to install fasteners Reduces exposed metal when the forms are removed Provides rigid support for pipes and conduits in concrete decks prior to the pour Support loop design eliminates restraint at the top Offers many additional uses Barely noticeable from below after forms are removed Works great in Post-Tension Decks to keep pipes away from Cables Eliminates the need to support from rebar or plastic chairs that break Support can extend above the concrete pour to protect the pipe Constructed with Zinc Coated Rod to Resist Corrosion To download specific product order forms, or to order online, go to CEASattachments.com Designed and Engineered by Professionals for Professionals Easy as 1, 2, 3 Multiple Loop Diameters are available on the same support. B - Example = *06 C - Example =.5 To alter this dimension, please note it on this order form. A - Select the support height Example = 18 D - Example = *01) Ordering Grid - Options as Shown on Individual Order Forms A B C D For reference only Height Stiffy I.D. Spacing GRC/PVC/ENT PVC Coated Rigid (Inches) *01 7/8 1/2 (.84 OD) (1/2 min to *01 Stiffy Sock *02 1-1/8 3/4 (1.05 OD) fit Couplings) *03 1-3/8 1 (1.32 OD) 3/4 (1.13 OD) *04 1-5/8 1-1/4 (1.66 OD) 1 (1.4 OD) *05 1-7/8 1-1/2 (1.9 OD) 1-1/4 (1.74 OD) *06 2-1/8 1-1/2 (1.98 OD) *07 2-3/8 2 (2.38 OD) *02 Stiffy Loop *08 2-7/8 2-1/2 (2.88 OD) 2 (2.46 OD) *09 3-1/2 3 (3.5 OD) 2-1/2 (2.96 OD) * /2 (4 OD) 3 (3.58 OD) *11 4-1/2 4 (4.5 OD) 3-1/2 (4.08 OD) *12 Other-Specify Size 1- Snap in style conduit supports are used for 1/2 and 3/4 GRC/PVC/ENT 2- Conduit Clips are used for 1 GRC/PVC/ENT and larger *Dimensions shown are for conduit OD only. Be sure to oversize the openings to account for couplings. Example Form Results A B1 B2 B3 B4 B5 B6 B7 B8 B9 C D Qty Fig Order Example - Stiffy Fig. 314 Order Online

12 Stiffy 300 Series Overview Product Index Designed and Engineered by Professionals for Professionals Fig. 300 thru 339 Form Poured Cast-in-Place Stiffy Supports Fig 300 Cast-in-Place Stiffy Tree Fig 301 Single Loop CIP Stiffy Tree Fig 302 Double Loop CIP Stiffy Tree Fig 303 Triple Loop CIP Stiffy Tree Fig 304 Single Loop CIP Stiffy with V Fig 310 CIP Stiffy Fig 311 CIP 2 Tiered Stiffy Fig 312 CIP Stiffy Loop Fig 313 CIP Stiffy 2 Tiered Loop Fig 314 Stiffy Snap-in CIP Fig 316 CIP Stiffy Cage Fig 317 Stiffy Snap-in Back-to-Back CIP Fig 320 CIP Stiffy Street 90 Support Fig 321 CIP Stiffy Billy Chair Support Fig 322 Table Top Turtle Box Support Fig 323 Stiffy Rebar Hook CIP Box Support Fig. 340 thru 379 Steel Deck Cast-in-Place Stiffy Supports Fig 324 Stiffy CIP Channel Box Support Fig 330 Stiffy Cast-in-Place Deck Sleeve Fig 331 Stiffy Single Row CIP Deck Sleeve Fig 332 Stiffy Double Row CIP Deck Sleeve Fig 333 Stiffy Cast-in-Place Strut Block Out Fig 340 Steel Deck Stiffy Tree Fig 341 Steel Deck Stiffy Tree with Loop Fig 351 Steel Deck CIP 2 Tiered Stiffy Fig 370 Stiffy Metal Deck Sleeve Fig 371 Stiffy Single Row Metal Deck Sleeve Fig 372 Stiffy Double Row Metal Deck Sleeve Fig. 380 thru 399 Steel Deck Drop thru Supports 11 Fig 380 Cast-in-Place Stiffy Jack Chain Loop Fig 381 Cast-in-Place Stiffy Straight Rod Fig 382 Cast-in-Place Stiffy Threaded Support

13 Jobsite Problems - s Real-world Jobsite Innovation Job Site Problem Typical Slab-on-grade Stub-up Support Fig. 410 Stiffy Slab-on-grade Supports Job Site Problem Step 1 - Perform layout Step 2 - Cut EMT for support Step 3 - Drive EMT into the ground Step 4 - Use tie wire to attach EMT and build the support Step 5 - Use tie wire to secure 90s to the support Step 6 - Use a level to confirm that the 90s are plumb Step 1 - Perform layout and install the Stiffy Supports Step 2 - Attach 90s to the support It doesn t get any easier than this... Quick to install Job Site Problem - Labor intensive, cut parts to size, tie wire - costly - Delivered as a complete assembly Addtional Benefits Insures that 90 s stay vertical during concrete pours YES Supports 90s in dirt prior to the concrete pour Rebar extends above the loops to allow for installation Support loop design eliminates top restraint YES 12

14 Stiffy 400 Series Ordering Product Index Designed and Engineered by Professionals for Professionals Eliminates the need to revisit stub up locations prior to concrete pours Designed to combine multiple installation steps to reduce the installed cost Provides rigid support for pipes and conduits in dirt and sand prior to the concrete pour Support loop design eliminates restraint at the top Offers many additional uses Support can extend above the concrete pour to protect the pipe Rebar extends above the loops to provide a surface to hammer the supports into the soil **Important te: When the rebar legs must penetrate a vapor barrier dip the Stiffy into a bucket of vapor barrier mastic to preserve the seal and eliminate the need to tape the penetrations. To download specific product order forms, or to order online, go to CEASattachments.com To alter this dimension, please note it on this order form. B - Example = *06 C - Example = *01 Conduit Clip A - Select Drop Length Example = 24 Easy as 1, 2, 3 Ordering Grid - Options as Shown on Individual Order Forms A B C For reference only Lower Assembly Height Stiffy I.D. GRC/PVC/ENT PVC Coated Rigid *00 Lower Assembly (Inches) *01 7/8 1/2 (.84 OD) *01 Conduit Clip (22 Typ.) *02 1-1/8 3/4 (1.05 OD) *02 Loop *03 1-3/8 1 (1.32 OD) 3/4 (1.13 OD) *04 1-5/8 1-1/4 (1.66 OD) 1 (1.4 OD) *05 1-7/8 1-1/2 (1.9 OD) 1-1/4 (1.74 OD) *06 2-1/8 1-1/2 (1.98 OD) *07 2-3/8 2 (2.38 OD) *08 2-7/8 2-1/2 (2.88 OD) 2 (2.46 OD) *09 3-1/2 3 (3.5 OD) 2-1/2 (2.96 OD) * /2 (4 OD) 3 (3.58 OD) *11 4-1/2 4 (4.5 OD) 3-1/2 (4.08 OD) *12 Other-Specify Size Example Form Results *Dimensions shown are for conduit OD only. Be sure to oversize the openings to account for couplings. A B1 B2 C Qty Fig Order Example - Stiffy Fig

15 Stiffy 400 Series Overview Product Index Fig Slab-on-grade Stiffy Stake Supports Fig. 401 Single Loop Fig. 402 Double Loop Fig. 403 Triple Loop Fig. 404 Quad Loop Fig Slab-on-grade Supports Fig 410 Stiffy Snap-in Slab-on-Grade Fig 414 Stiffy Single Loop Slab-on-Grade Fig 415 Stiffy Double Loop Slab-on-Grade Fig 417 Stiffy Back-toBack Slab-on-Grade Fig Slab-on-grade Other Supports Figs 420 Stiffy Slab-on-Grade Candy Cane Pipe Support Figs 421 Stiffy Slab-on-Grade Double Candy Cane Pipe Support Figs 430 Stiffy Slab-on-Grade Panel Cage Support Fig. 450 Stiffy Slab-on-Grade Single Column Trench Rack Fig. 451 Stiffy Slab-on-Grade Double Column Trench Rack Order Online

16 Shooting, drilling and screwing... Manufacturers of engineered support solutions for more than three decades. BUY AMERICAN ACT COMPLIANT CORPORATE HQ & MFG rtham St. La Mirada, CA GOO-CEAS ( ) BRANCH OFFICES SAN DIEGO, CA 6490 Marindustry Pl., Suite C San Diego, CA ph EAST COAST HEADQUARTERS 1020 Crews Road, Suite Q Matthews, NC ph SAN FRANCISCO BAY AREA, CA Albrae Street Fremont, CA ph SACRAMENTO, CA 8169 Alpine Ave., Suite C & D Sacramento, CA ph ARIZONA 4219 Broadway Rd., Suite 108 Phoenix, AZ ph OREGON N.E Airport Way, Suite 113 Portland, OR ph WASHINGTON 5113 Pacific Highway, Unit 3 Fife, WA ph NEVADA 4125 Wagon Trail Road Las Vegas, NV ph NEW YORK 2800 Bruckner Blvd., Suite# 308 Bronx NY, ph UTAH Lone Peak Pkwy, Suite 106 Draper, UT ph PUERTO RICO 701 Ponce de León Ave, PMB 157 San Juan, PR ph CONSTRUCTION ENGINEERED ATTACHMENT SOLUTIONS ceasattachments.com (877) GOO-CEAS (877) CEAS - All Rights Reserved