Holder Assembly. Assembly. 1 MCP bottom holder. 2 MCP top holder 3 Clip. 9.5x9.5x0.4 1 lbf. Weight: 0.32 lbs. Allen Zhao
|
|
- Stanley Murphy
- 6 years ago
- Views:
Transcription
1 Holder ssembly ssembly 9.5x9.5x0. lbf MP bottom holder Weight: 0. lbs MP top holder lip llen Zhao
2 Sheet Metal inder top spring clamp spacer inding for mm edge llen Zhao
3 FE of MP Load:.: 5G Max on the plane and out of the plane Fixed at the mm edges On the plane: eflection: ths Stress: psi (.ksi) Out of the plane: eflection: 0.6 ths Stress: 58 psi (.ksi) llen Zhao
4 PRTS LIST ITEM QTY PRT NUMER 8x8_MP 8by8_MP_MidPlate 8by8_MP_UpownPlate MP ottom_sheet Metal 5 MP Top_Sheet Metal 6 lip F G 5 F SETION F-F SLE : ETIL G SLE : NEXT SSEMLY REQ THIS RWING IS THE PROPERTY rgonne NTIONL LORTORY STTUS UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES EIML TOLERNE `. `.0 X NGULR TOL ` /~ FRTIONL TOL ` /6 REMOVE LL URRS N SHRP EGES SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M O NOT SLE RWING NUMER RWN Y llen H. Zhao GP LEER 9/8/00 HEKE PROJET MGR RESPONSILE ENGINEER PV/RELESE OUMENT TITLE: Transport Fixture ssembly PROJET NO: PROJET TITLE: SLE MTERIL SHEET 6 SHEET SIZE RWING NUMER Transport Fixture
5 R J.0 H ETIL H SLE R.9 ETIL J SLE : rgonne NTIONL LORTORY NEXT SSEMLY REQ THIS RWING IS THE PROPERTY STTUS NUMER O NOT SLE RWING OUMENT TITLE: UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES EIML TOLERNE `. `.0 X NGULR TOL FRTIONL TOL ` /~ ` /6 RWN Y llen H. Zhao HEKE RESPONSILE ENGINEER hzhao REMOVE LL URRS N SHRP EGES MTERIL SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M Stainless Steel 6 7/6/00 GP LEER PROJET MGR PV/RELESE SLE SHEET SHEET SIZE 6 PROJET TITLE: LPP Spacer PROJET NO: RWING NUMER 8by8_MP_MidPlate
6 R L ETIL K SLE K R.06 ETIL L SLE rgonne NTIONL LORTORY NEXT SSEMLY REQ THIS RWING IS THE PROPERTY STTUS NUMER O NOT SLE RWING OUMENT TITLE: UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES EIML TOLERNE `. `.0 X NGULR TOL FRTIONL TOL ` /~ ` /6 RWN Y llen H. Zhao HEKE REMOVE LL URRS N SHRP EGES MTERIL SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M RESPONSILE ENGINEER Stainless Steel 6 7/6/00 GP LEER PROJET MGR PV/RELESE SLE SHEET SHEET SIZE 6 PROJET TITLE: Spring Plate PROJET NO: RWING NUMER 8by8_MP_UpownPlate
7 NEXT SSEMLY REQ rgonne NTIONL LORTORY THIS RWING IS THE PROPERTY STTUS NUMER O NOT SLE RWING OUMENT TITLE: UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES EIML TOLERNE `. `.0 X NGULR TOL FRTIONL TOL ` /~ ` /6 RWN Y llen H. Zhao HEKE RESPONSILE ENGINEER llen H. Zhao REMOVE LL URRS N SHRP EGES MTERIL SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M Stainless Steel 6 9/8/00 GP LEER PROJET MGR PV/RELESE SLE SHEET SHEET SIZE 6 PROJET TITLE: LPP Spring lip RWING NUMER lip PROJET NO:
8 R M N M R SETION M-M SLE / STTUS UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES NUMER RWN Y llen H. Zhao 9/8/00 ETIL N SLE O NOT SLE RWING GP LEER rgonne NTIONL LORTORY OUMENT TITLE: NEXT SSEMLY REQ THIS RWING IS THE PROPERTY EIML TOLERNE `. `.0 X NGULR TOL FRTIONL TOL ` /~ ` /6 HEKE REMOVE LL URRS N SHRP EGES MTERIL SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M RESPONSILE ENGINEER Stainless Steel 6 PROJET MGR PV/RELESE SLE 5 SHEET SHEET SIZE 6 PROJET TITLE: PROJET NO: RWING NUMER MP Top_Sheet Metal
9 R P P R ETIL R SLE 5 rgonne NTIONL LORTORY NEXT SSEMLY REQ THIS RWING IS THE PROPERTY STTUS NUMER O NOT SLE RWING OUMENT TITLE: SETION P-P SLE / UNLESS OTHERWISE NOTE LL IMENSIONS RE INHES EIML TOLERNE `. `.0 X NGULR TOL FRTIONL TOL ` /~ ` /6 RWN Y llen H. Zhao HEKE REMOVE LL URRS N SHRP EGES MTERIL SURFES TO E IN ORNE WITH LTEST NSI 6. IMENSIONS & TOLERNES IN ORNE WITH LTEST SME Y.5M RESPONSILE ENGINEER Stainless Steel 6 9/8/00 GP LEER PROJET MGR PV/RELESE SLE 6 SHEET SHEET SIZE 6 PROJET TITLE: PROJET NO: RWING NUMER MP ottom_sheet Metal
Instructions for Continued Airworthiness
Instructions for ontinued irworthiness Grizzly law Ski rag ocument No. F00I ircraft Serial Number: ST Number: S0K These Instructions for ontinued irworthiness shall be included in the airplane Maintenance
More informationPump Assembly. 25 Ton Jack. Air Kit. Emerson PN. Hyd Kit. Emerson PN. Air Kit ITEM NO.
2 4 ITM NO. ir Hyd SRIPTION QTY. 2-0P Pump ody 2 2-02P Piston Spring 2-0P Piston ssembly 4 2-04P Piston O-Ring 2-0P ir Piston Rod O-Ring 6 2-06P ir Motor lock 7 2-07P ir Motor lock O-Ring 8 2-08P ir Motor
More informationLS3L-R-D. Litespeed MOD 3 LED Recessed Slot. Ordering Guide. Key Features. Performance LITESPEED LS3L-R-D. Fixture Type: Project Name:
Fixture Type: Project Name: Litespeed MO LE Recessed Slot Ordering Guide Feature ode Options escription Series L MO Mounting W rywall PT rywall with plaster trim LG / Grid NG 9/ Grid SS 9/ Screw Slot &
More informationBollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationTechnical Data. Approvals UL and C-UL Listed FM Approved. Maximum Working Pressure 250 psi (7,2 bar) Friction Loss Refer to Graphs A and B
Worldwide ontacts www.tyco-fire.com Model Pipe Line Strainer General Description The welded steel body Model Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply
More informationAN Wireless Tower Assembly Instructions
N Wireless Tower ssembly Instructions RED THOROUGHLY EFORE SSEMLY ND ERETION Thank you for your purchase of an N Wireless Self Supporting Tower. N Wireless Towers are designed and fabricated to be high-strength,
More information300lb MALLEABLE FITTINGS
NIPPLES & FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS MLLEBLE FITTINGS ISO 9002 - CERTIFICTE OF QULITY - UL/ LISTED ND PPROVED T 300 PSI Our quality fittings are made with care and attention to detail.
More informationMechanical Drawings POS-Line 17.3 (438.2 mm)
Mechanical rawings POS-Line 7. (8. ) Revision. Oct. ata isplay Group www.datadisplay-group.com ,8 8 7,,,,, ( 9, ) ( 8 ) 9, (chassis outline) 8 (bezel opening),8 (active area) 9,, 8,, (chassis outline)
More informationHORIZONTAL SLIDER - NON-IMPACT
73 /" 72" MX. UNIT 7 7/8" MX. SSH /" GLSS LO HORIZONTL SLIER - NON-IMPT 3" MX. SSH WITH /" GLSS LO X 75 /" WITH 7" MX. UNIT WITH O 3" MX. SSH WITH /" GLSS LO 75 /" WITH 7" MX. UNIT WITH GENERL NOTES:.
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationMechanical Drawings POS-Line 17.3 (438.2 mm)
Mechanical rawings POS-Line 7. (8. ) Revision.9.7 ata isplay Group www.datadisplay-group.com ,8 8 7,,,,, ( 9, ) ( 8 ) 9, (chassis outline) 8 (bezel opening),8 (active area) 9,, 8,, (chassis outline) 8,
More informationOPTIONS. Mounting ACCESSORIES FLEXAC.CLIP FLEXAC.EC FLEXAC.P6 FLEXAC.4.C04 FLEXAC.4.C10 PERFORMANCE
FLEX 4 FLEX features driver-less LE technology R9 Values of 60+ Optically clear thermoplastic coating rated for IP65, interior or exterior This product can run up to 100 ft from a single feed with uniform
More informationService Manual IMPORTANT SAFETY NOTICE
PEG0909042E Version:1101 Service Manual Super Quiet Ventilating Fan/Light ombination WhisperLite TM (North merican Market) FV-05VQ5 FV-08VQ5 FV-11VQ5 FV-08VQL5 FV-11VQL5 FV-15VQ5 FV-15VQL5 WRNING This
More informationD A N D E BATTERY BOX ASSEMBLY
NOTS:. TTRY OX SSMLY ONSISTS O TWO INTIL SSMLIS 2. OTH MOUNT TO TH QUTORIL PLT ON TH +Z SI. SSM IS MOUNT ON TH +X SI 4. SSM 2 IS MOUNT ON TH -X SI 5 7 5 6 4 RVISIONS RVISION RVISION HNG T R PS2. INITIL
More informationE. STRUCTURAL STEEL G. STRUCTURAL SPECIAL INSPECTIONS
9 9. GENERL STRUTURL NOTES. ESIGN INFORMTION. OES a. ESIGN ONFORMS TO I 9 NEW JERSEY EITION. b. MERIN ONRETE INSTITUTE (I) - "UILING OE REQUIREMENTS FOR STRUTURL ONRETE" I - c. MERIN INSTITUTE OF STEEL
More informationTite-Seal and Screw Type Assemblies
Tite-Seal and Screw Type ssemblies 2-2206-2 ontinental Disc orporation s Tite-Seal and Screw Type assemblies are complete rupture disc and holder units specifically designed for use on various types of
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationSIX CYLINDER RADIAL STEAM ENGINE WITH SLIDE VALVES GENERAL ARRANGEMENT IF NOT STATED ALL CHAMFERS ARE 0.2mmx45
/// IF IN DOUBT SK REMOVE LL BURRS ND SHRP EDGES 0 QTY. PRT NUMBER 0-BSE 0-BSE PLTE 0-SPCER PLTE -SIDE PLTE -SIDE PLTE -CRNK SHFT BERING 0-FLYWHEEL INNER 0-FLYWHEEL HUB -FLYWHEEL HUB PINS -CRNK SHFT -CRNK
More informationLOT 2 PEDRICK-ECKERD FILING NO. 3
SITE WG NO. RWING TITLE LOT PERIK-EKER FILING NO. 67 SEURITY LV OLORO SPRINGS, O 809 OF TITLE SHEET OF EVELOPMENT PLN OF EVELOPMENT ETILS OF PRELIMINRY UTILITY N PULI FILITY PLN OF PRELIMINRY GRING PLN
More informationgpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference.
LL VLVS 51 *imensions are subject to change and are considered reference. 2 1 TURS & NITS O PP LL VLVS Trunnion style ball valves w/positive shut-off in 10,000-15,000-psi (689-104-179 bar) esigned for
More informationC 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
More informationl DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
More informationNEW INTERLOCKING BLOCK RETAINING WALL, TYP. 7' - 0" 4' - 0" CRUSHED ROCK, TYP. 3' - 0" 8' - 0" 2' - 0" 3' - 0" 6' - 0" 24' - 0" 1% MIN.
' - 0" ' - 0" 6' - " ' - 8" 6' - 0" ' - 5" ' - 0" ' - " 6' - 7/" ' - /" ' - 0" RUSHE ROK, TYP. ' - 0" NEW INTERLOKING LOK RETINING WLL, TYP. ' - 0" LIMIT OF ITION OVE ' - " ON. SL ON. WLL - SEE STRUTURL
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationSense Element Pump Ripple Fatigue
white paper Sense Element Pump Ripple Fatigue Providing and analyzing solutions to protect sensitive components in aircraft hydraulic systems from prolonged exposure to pump ripple. 2 CONTENTS Sense Element
More informationNON-TRAP PARASITIC ELEMENTS ELEMENT P-10 10M Reflector 39 10m Rear Driver 28 10M Front Driver 28 10M Director 24
C B REINFORCEMENT TYPE P (SEE DWG. 140009) 36" P-10 COMPONENTS, DIMENSIONS: PRSITIC ELEMENTS REINFORCEMENT TYPE BE (SEE DWG.) B REINFORCEMENT TYPE BC SSY 140019 COMPONENTS, TRP SSEMBLY SLOT WITH SINGLE
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationACCU-STEAM GAS GRIDDLE PARTS MANUAL
U-STEM S RILE PRTS MNUL orm SP800-0808 ccutemp Products, Inc. 8 North linton Park ort Wayne, IN 68 800-80-0 www.accutemp.net OUMENT HISTORY urrent revision: Prior revision: None ate: 08/08/08 ate: None
More informationColumn w/laterals. Steel Column A992 50ksi Steel. 1 Rev
olumn w/ SOREOR HEIGHT WITH ddtional display area consisting signs, arches, message centers or video above or below the scoreboard. (see sheets 7) for column and pier sizing) Equal TOP SOREOR SETION OTTOM
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationErection, maintenance and disposal Inverted installation. Zinc oxide silicone-housed surge arresters PEXLIM R-X, Q-X and P-X
Erection, maintenance and disposal Inverted installation Zinc oxide silicone-housed surge arresters PEXLIM R-X, Q-X and P-X 1 Important information The following instruction is valid for PEXLIM R-X, PEXLIM
More informationNMSU PROJ #3077 STORAGE FACILITY - PHASE 3 BUILDING C (384)
2 SEPT 26, WG PROJET NO: OWNER: NEW MEXIO STTE UNIVERSITY NMSU PROJ #3077 STORGE FILITY - PHSE 3 UILING (384) RWING INEX: GENERL G00 OVER SHEET NMSU STORGES PHSE 3 RESERH R. LS RUES, NM 8800 780 E UNIVERSITY
More informationRESIDENTIAL - IRRIGATION - WATER TREATMENT OF FLORIDA PUMP PROTECTION - EFFICIENCY - ENERGY SAVER - COMFORT
OF FLORIDA Pressure Gauge Dry Pressure gauge DRY Steel casing Lower mount PG060L20D4M 1/4" LOWER MOUNT METAL 2" 0-60 PSI 100 0.21 PG100L20D4M 1/4" LOWER MOUNT METAL 2" 0-100 PSI 100 0.21 Pressure gauge
More informationSCOUT DECK ANCHOR 3 1/4" BONDING SCREW
SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR
More informationpneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
More informationTower Accessories & Hardware
Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing
More informationDifferential pressure switch / Lube oil protection control MP 54 and MP 55
Data sheet Differential pressure switch / Lube oil protection control MP 54 and MP 55 MP 54 and MP 55 oil differential pressure switches are used as safety switches to protect refrigeration compressors
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationTECHNICAL DATA - CHASSIS 185
TECHNICAL DATA - CHASSIS 185 Frame Fork Shock absorber Suspension travel (990 Adventure) Suspension travel (990 Adventure R) Suspension travel (990 Adventure) Suspension travel (990 Adventure R) Brake
More informationSECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
More informationTools & Installation. Tools & Installation Index
L Radius +0 59-2 32 60 +2 A B -0 32 C E F.09" ia. Weep Hole Tools & Installation MAXIMATOR offers manual Coning and Threading tools that are designed to prepare accurate tubing ends to accept the medium,
More information3/4 MPT w/ MHT Flush & Cap (80 psi) (A2)
4E PLASTIC FILTERS Debris Basin Typical Filter Components Shown 3/4 MPT w/ MHT Flush & Cap (80 psi) (A2) Note: All Plastic Filter models available drilled and tapped for 1/8 schrader valve. Contact customer
More informationFT16 Ball Float Steam Trap Installation and Maintenance Instructions
1430050/1 IM-P143-04 ST Issue 1 FT16 Ball Float Steam Trap Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation ½" and ¾" shown 4 Commissioning
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationIndustrial Regulator Series 1800/2000
E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series
More informationFASTENERS, CLAMPS & STRAPS
Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie
More informationEn-Tegrity. A step change in subsea well control safety
En-Tegrity A step change in subsea well control safety Product Overview 7-3/8, 10,000psi, Shear & Seal Gate Valve Main Well Barrier in Intervention Well Control Package (WCP) Features Bi-Directional Sealing
More informationDrop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated
Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation
More informationBronze Fittings & Flanges Brass Nipples
CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM ronze Fittings & Flanges rass Nipples 125 lb ronze Threaded Fittings 90 Elbow 1/8 36E 1001C 0.54 - - 0.078 50
More informationCasing Spacer Technology Leaders
Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,
More informationCOM PRESSO R. mini air compressor. makeup cpmpressor
COM PRESSO R makeup cpmpressor makeup cpmpressor MDC-10 The lightweight (455g / 0.99lb), palm-sized designed that is quiet, high powered. Our compressor can be used for makeup, temporary tattoos, finger
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationS5 HAB/HAD SEAT Abductor / Adductor
Number S3-S5/QTY. DESRIPTION SF615 1 NITRO H SET FRME M635 1 LEFT MOVEMENT RM LK639 1 S3 H RNGE SELETOR LEVER S602 1 S3H SET K M634 1 RIGHT MOVEMENT RM LK635 1 S3H IDLER LINKGE SSY LK634 1 S3H SELETOR
More informationMISSISSIPPI RIVER SPILLWAY PLAN (2013 FLOOD RECOVERY) MISSISSIPPI RIVER SPILLWAY PROFILE (2013 FLOOD RECOVERY) C-200 PROJECT BOUNDARY
c:\pw_working\mvr\b5eddlh\d032060\_-200xxx.dgn $TE$ 5E 9:6:5 M N 37+00 372+00 373+00 37+00 PO N 3397.37 E 23639.0 535.90 537.6 535.8 535.27 535.2 535.07 H:V 50H:V 375+00 5H:V 376+00 5H:V H:V 3H:V PROJET
More information10mm SHOWER PANEL SIZES 1000 & 1200 SIZES 500, 600, 700, 800 & 900 SIZES 1000 & 1200 OPTION 1 - PAGES 2-4 OPTION 2 - PAGES 2-5 OPTION 3 - PAGES 6-7
SHOWER PANEL 785 / Issue / 5 SIZES 5, 6, 7, 8 & 9 SIZES & SIZES & OPTION - PAGES - OPTION - PAGES - 5 OPTION 3 - PAGES 6-7 Plese red these instrutions refully nd keep for future referene. Inorret fitting
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationa division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
More informationMechanical Anchoring Systems HDA Undercut Anchor Product description. HDA-P Undercut Anchor Pre-Set Type
Mechanical Anchoring Systems 3.3 3.3.1 HDA Undercut Anchor 3.3.1.1 Product description The Hilti HDA undercut anchor is a heavy-duty mechanical anchor with carbide-tipped undercut segments used to perform
More informationCopyright 2015 Winnebago Industries, Inc.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
More information6146XX-X OPEN STYLE HOSE REELS
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationCOMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam
OMMRIL MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas
More informationLARGE BINOCULAR TELESCOPE 2 x 8.4M TELESCOPE SAFFORD, ARIZONA
REV DESCRIPTION DTE REVISED BY PPROVED INITIL RELESE 05/21/07 V. GSHO V. GSHO 2 x 8.4M TELESCOPE SFFORD, RIZON DYNMIC BLNCING PIPING INSTLLTION OWNER Ph. 1 520 626-5231 Fax. 1 520 621-9843 LOCTION MP P
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationLMP 110 Maximum pressure 80 bar F l o w r a t e s t o l / m i n
LMP Maximum pressure 8 bar F l o w r a t e s t o 6 l / m i n Technical data Filter housing (Materials) Head: luminium Housing: ataphoresis Painting ypass valve: rass - luminium Pressure LMP length: - -
More informationMaximum Inlet Pressure. Maximum Outlet (Casing) Pressure. Outlet Pressure Range. 2-inches w.c. to 10 psig (5 mbar to 0,69 bar) Flow Coefficients
Introduction The quickreacting S200 Series pressure reducing service regulators are typically used in industrial or commercial installations to minimize the shock effect of sudden downstream load changes
More informationIN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
More informationCOMMERCIAL. Resilent Seated Butterfly Submittal/Technical. Technical Specifications. Application COMMERCIAL. Service
OMMRIL Resilent Seated utterfly Submittal/Technical pplication ray s NY and series resilient seated butterfly valves set the design standard for quality, reliability and long life in a wide variety of
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationRM052S-XXX-XX TWO POST LIFT / RAM
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). INGERSOLL RAND COMPANY LTD 209 NORTH MAIN STREET BRYAN, OHIO 43506 (800)
More informationREPORT HOLDER: FRAMECAD LICENSING LTD. POST OFFICE BOX 1292 AUCKLAND 1140 NEW ZEALAND EVALUATION SUBJECT: COLD FORMED STEEL C SHAPES AND TRACKS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2361 Reissued 05/2017 This report is subject to renewal 05/2019. DIVISION: 05 00
More informationRM051S-XXX-XX SINGLE POST LIFT / RAM
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). INGERSOLL RAND COMPANY LTD 209 NORTH MAIN STREET BRYAN, OHIO 43506 (800)
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationUTILITY SPRINGS SeRvIce We DeLIveR and QUaLITY YoU can DePeND on DaYToN LaMINa DaYToN LaMINa
Service We Deliver and Quality You Can Depend On DAYTON LAMINA is a leading manufacturer of die and mold components supplied globally to the metalstamping and parts forming industry. Backed by years of
More information5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
More informationCA14 SG Iron Air and Gas Trap ½" and ¾" (Screwed)
ert. No. LRQ 9638 ISO 91 14 SG Iron ir and Gas Trap ½" and ¾" (Screwed) TI-P148-1 ST Issue 6 escription The 14 is a range of float type automatic liquid drainers for air and gas systems. The body and cover
More informationRADON 237A: ASSEMBLY GUIDE. Revision Valid for MY2017 Radon
RADON 237A: ASSEMBLY GUIDE Revision 3.0-05-29-2017 - Valid for MY2017 Radon RADON 237A: Table of Contents 1. Tools Needed and First Aid Kit... 3 2. Sizing Chart... 4 3. Seat Post Collar Assembly... 5 4.
More informationModel 1800 PFM Series Regulator
Model 800 PFM Series Regulator Model 800 PFM Series Regulator 0 Elster 800 PFM Series Regulator losing Springs For improved lock-up performance Low differential High differential (See losing Spring chart
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationFLAT BAR ERGOPOWER 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY WARNING! COMPATIBILITY
ERGOPOWER FLT R 1 - TECHNICL SPECIFICTIONS 2 - COMPTIILITY WRNING! COMPTIILITY These controls were conceived, sized and created solely for use on roads. They are therefore not suited to other purposes
More information44 CE RANGE WATERTIGHT SURFACE-MOUNTING JUNCTION BOXES
WALL BOXES IN GWPLAST 75 - GWT 650 C GWT 650 C TP 85 C WALLS WITH CABLE GLAND - IP44 AND IP55 GW44001 JUNCTION BOXES WITH PLAIN PRESS-ON LID - IP44 - GREY RAL 7035 LxHxD (mm) No. holes / Ø GW 44 001 Ø
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationSuperstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
More informationOpening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º
17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000
More information02 Push-to-Close Latch
142 02 Push-to-lose Latch ousing: Polypropylene, black or white Pole pieces and mounting : Steel, zinc plated Magnet:, large: Barium ferrite : Strontium ferrite 7.7 (.30) 13.3 (.52) 6.1 (.24) 23.6 (.93)
More informationL125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE
L15 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE TAKE CONTROL Take control with Muncie Power Products L15 directional control valve. The L15 is constructed with high-grade, iron castings and nickel-plated
More informationFTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
More informationPTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
More informationTZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
www.ucanfast.com TECHNICAL MANUAL SECTION 2.2 PAGE 1 / 10 ä DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind
More informationDifferential pressure controls/ Lube oil protection controls MP 54 and MP 55 REFRIGERATION AND AIR CONDITIONING. Technical leafl et
Differential pressure controls/ Lube oil protection controls MP 54 and MP 55 REFRIGERATION AND AIR CONDITIONING Technical leafl et Contents Page Introduction... 3 Features... 3 Approvals... 3 Materials
More informationORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
l MANUAL AIRSPRAY GUN S3 TECHNICAL FEATURES ORIGINAL MANUAL IMPORTANT : before assembly and start-up, Please read and clearly understand all documents relating to this equipment (professional use only).
More informationAWWA Pipe Flanges. AWWA C Standard Steel Hub Flanges Class D AWWA C Standard Steel Hub Flanges Class E AWWA C Flange Manufacturer
WW Pipe Flanges WW Flanges are commonly used in waterworks, wastewater, slurry, plant piping or other light duty applications generally requiring pressures of less than 300 psi. Pressure ratings for WW
More informationAUTOMATIC AIRSPRAY GUN model A 25 - A 26
SPECIFICTIONS UTOMTIC IRSPRY GUN model 25-26 Manual : 0407 573.061.212 Date : 19/07/04 Supersede : Modif. : DDITIONL DOCUMENTTIONS SPRE PRTS : GUN, model 25 Doc. 573.083.050 GUN, model 25 LP Doc. 573.084.050
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES SZ)
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES ) Double-acting. Spring closed (upon request). Patented self-centering system. Multiple mounting and porting options. Optional magnetic sensors.
More informationVirtue Suspension Manual
Contents:.... 5. Introduction Equilink Function Simply Explained Setup Rebuild / Maintenance Parts Lists Carbon Care uide. Introduction To The Equilink: Congratulations on purchasing this high quality
More informationPrewired position switches FA series
Prewired position switches Technical data Housing Made of metal, coated with baked epoxy powder 2 m wired cable with 5x0,5 mm 2 wires marked SEV and IMQ Protection degree: IP6 General data Ambient temperature:
More informationBourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
More information