Pool and Spa. Water Testing

Transcription

1 Pool and Spa Water Testing

2 Pocket Digital Testers for Pools HI-701 Checker: Free Chlorine Hand-held Colorimeter The HI-701 is a simple, accurate and cost effective way to measure free chlorine. Free Chlorine: 0.00 to 2.50 mg/l (ppm Single-button operation Clear to read large Liquid Crystal Display screen (LCD High precision results - more accurate than chemical test kits Affordable, quick & easy Fully portable, fitting easily into both palm and pocket Auto shut-off feature means the Checker cannot be left on by mistake HI Checker Plus ph Tester with replaceable electrode The HI Checker Plus provides users with fast and accurate readings from 0 to 14 ph with a resolution of 0.01 ph. The Checker Plus features and easy to read LCD and two-point calibration with automatic buffer recognition. ph: 0.00 to Fast, accurate readings Sturdy compact meter with thin long-reach ph electrode Large LCD screen Stability indicator and automatic shut-off One or two point automatic calibration One button operation

3 HI phep Pocket ph Tester with renewable cloth junction The HI has an extended life over typical ph testers with a 2cm long junction that can be pulled out to expose a fresh section in order to effectively renew the ph tester's life. ph: 0.0 to 14.0 Temp: 0.0 to 50.0 Large multi-level LCD screen Integrated temperature sensor Two button operation One or two point calibration Stability indicator and automatic shut-off Low battery indicator HI Pocket ph & ORP (Redox Tester with replaceable cartridge electrode With the HI it is possible to monitor both ph and ORP at the same time. This tester is designed to float making it ideal for taking ORP measurements in pools and spas. With a cartridge electrode - exclusive to Hanna - there are no pins to bend or break during replacement. ph: to ORP: ± 1000 mv Temp: -5 to +60 Combination ph and Redox / ORP electrode Large multi-level LCD screen Automatic temperature compensation One or two point automatic calibration Stability indicator and hold function

4 HI Multi-parameter Photometer with ph meter for swimming pools and spas The HI is a compact, multi-parameter photometer for use in pool and spa applications. Parameters measured include alkalinity, free chlorine, nitrite, and phosphate, which are critical to maintaining a healthy system. The sample cell fits a round, glass cuvette with a 25 mm path length. The larger size of the cuvette greatly reduces errors in rotation from the indexing mark of the cuvettes. Alkalinity: 0 to 500 mg/l (as CaCO 3 Bromine: 0.00 to 8.00 mg/l (as Br 2 Chlorine: 0.00 to 5.00 mg/l (as Cl 2 Copper: 0.00 to 5.00 mg/l (as Cu2+ Cyanuric Acid: 0 to 80 mg/l (as CYA Hardness, Calcium: 0.00 to 2.70 mg/l (as CaCO 3 Iron: 0.00 to 5.00 mg/l (as Fe Nitrate: 0.0 to 30.0 mg/l (as NO 3 - N Ozone: 0.00 to 2.00 mg/l (as O 3 ph: 6.5 to 8.5 ph 12 different programmed methods measuring 11 key water quality parameters Data Logging - Up to 1000 photometric and ph readings High efficiency LED light source Optional digital ph electrode input allowing for ph measurement with a glass electrode Built-in reaction timer for photometric Measurements USB connection for data export

5 HI Portable ph, Chlorine & Cyanuric Photometer The HI portable photometer is for the measurement of ph, free and total chlorine, and cyanuric acid. ph: 6.5 to 8.5 Chlorine: 0.00 to 5.00 mg/l (ppm Cyanuric Acid: 0 to 80 mg/l (ppm CAL Check - verification & calibration of the meter using a CAL Check NIST traceable secondary standard Built-in timer ensures appropriate reaction time is used for the chemical reaction Auto-shut off after 10 minutes of non-use when the meter is in measurement mode Battery status indicator HI ISO Portable Turbidity Meter The HI is a high accuracy ISO compliant portable turbidity meter which meets and exceeds the requirements of the ISO 7027 for water quality and provides reliable and accurate readings on low turbidity values. FTU: 0.00 to to to 1000 Optical system consists of an infrared LED and two detectors, for long term stability and the minimising of stray light and colour interferences Data Logging - Up to 200 readings Two, three or four point calibration

6 BL-121 Pool & Spa Controller ph/orp swimming pool controller with built-in chemical feed pumps The BL-121 swimming pool controller is a complete system designed for maintaining swimming pool, hot tub, and spa disinfection water quality, available in two configurations. The basic version is the in-line model, which allows for direct installation of probe and chemical injection fittings into existing piping. A panel-mounted version with a bypass flow cell is also available. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Two peristaltic dosing pumps with replaceable chemical resistant tubing Proportionally controlled dosing pumps allow for very fine control in maintaining the desired set point Adjustable flow rate for better control in maintaining a desired set point LCD screen with three display options: all three parameters at one time, a 3-second cycle of single parameters, or a real-time plot screen with options for parameter selection, zooming, and log recall Readings for each parameter are automatically logged every 10 seconds. A new log is started after each calibration or at the start of a new day.

7 supplied with HI multi-parameter digital ph, ORP, temperature probe The HI is a digital probe that measures ph, ORP, and temperature. This probe also incorporates a potential matching pin. The matching pin is considered the earth ground connection and is used to prevent ground loop effects from causing erratic readings and damage to the system. The ORP and ph sensors and reference electrode use a differential measurement technique which is known to stay in service and provide accurate measurements under adverse conditions that may cause conventional ph probes to produce erroneous measurements. Three Display Modes The versatile display of the BL-121 allows for three display modes. The LCD can display all three parameters at one time, a 3-second cycle of single parameters, or a real-time plot screen with options for parameter selection, zooming, and log recall. Range 0.00 to ph, to mv, -5.0 to C Pumps Logging Alarms Password Protection automatic and manual modes with adjustable flow rate from 0.5 to 3.5L/h automatic logging of ph, ORP and temperature including date/time and events such as alarms, errors, power failure. Data capacity for 60 days with 10 second sampling interval. Data stored as.csv files and transferrable to USB flash drive high and low with enable/disable option for all parameters prevents unauthorised interference

8 ph & Chlorine (ORP electrodes for fully automatic dosing* AmpHel ph Electrode with replaceable battery HI AmpHel ORP Electrode with replaceable battery HI Plastic Body ph Electrode with Teflon junction HI-1286A ORP Electrode with anti-clogging design HI-3214P Combination ph Electrode with high-temperature glass (-5 to 80 C HI-1211T Combination ORP Electrode with platinum sensor HI-3211T ph Buffer Solutions 500 ml bottles HI-7004L ph 4.01 HI-7007L ph 7.01 HI-7010L ph10.01 Storage and Cleaning Solutions 500 ml bottles HI-7061L Cleaning HI-70300L Storage *Hanna electrodes are fully compatible with other makes of automatic pool dosing systems Your local stockist: