Round Marine Pads - (Packaged in pairs)
|
|
- Donna Ryan
- 6 years ago
- Views:
Transcription
1 Round Marine Pads - (Packaged in pairs) POLISHED PADS 3-Hole Round Pads - Bright Dipped POLISHED - Standard Edge D # #10 (5/16 threaded center hole) D #10 D-303A 3 1/4 D-303-NCS 3 1/4 (NO countersink on holes) D /4 D-353-NCS 3.5 1/4 (NO countersink on holes) D /4 D /4 (1-1/4 center hole) D /4 (3/8 center hole - NOT threaded) D /4 D-453-NCS 4.5 1/4 (NO countersink on holes) D /4 3 Hole Round Pads - Bright Dipped POLISHED - EP STYLE EP /16 EP /4 EP /4 EP /4 EP /4 4-Hole Round Pads - Bright Dipped POLISHED - Standard Edge D #10 D /4 D /4 D-404-NCS 4 1/4 (NO countersink on holes) D /4 (1-1/4 center hole) D-404OS 4 1/4 (offset) D /4 D /4 SPECIAL ORDER 5 (D ) 1/4 (1-1/4 center hole) D = Polished B = Brushed 4 3-Hole Round Pad Bright Dipped Polished (D) 4-Hole Round Pad - Bright Dipped Polished (D) 1-1/4 center hole 4 Hole Round Pads - Offset Bright Dipped Polished (D) 4 Hole Round Pads - Bright Dipped POLISHED - EP STYLE EP /4 EP /4 EP /4 (1-1/2 center hole) EP-404OS 4 1/4 (offset) EP /4 EP /4 (1-1/2 center hole) EP /4 4 Hole Round Pads (EP Style) Bright Dipped Polished 5 Hole Round Pads - Bright Dipped POLISHED - EP STYLE EP NEW! 5 1/4 Marine 07 website: info@easternmetal.com version: 05/19/17
2 Round Marine Pads - (Packaged in pairs) HIGH POLISHED PADS 3-Hole Round Pads - HIGH POLISHED - EP STYLE PEP #10 PEP /4 PEP /4 PEP /4 PEP /4 (1-1/4 center hole) PEP /4 (3/8 thick) PEP /4 D = Polished B = Brushed 4-Hole Round Pads - HIGH POLISHED - EP STYLE PEP #10 PEP-404OS 4 1/4 Offset PEP /4 EP /16 (5 holes) PEP /4 BRUSHED PADS 3-Hole Round Pads - Bright Dipped BRUSHED - Standard Edge B-303A 3 1/4 B /4 B-400-TCH 4 3/8 (Threaded Center Hole) B /4 B /4 B /4 4-Hole Round Pads - Bright Dipped BRUSHED - Standard Edge B /4 B-404OS 4 1/4 (offset) B /4 B /4 3 Hole Round Pads - Bright Dipped BRUSHED - EP STYLE - NEW! EPB /2 1/4 EPB /4 EPB /2 1/4 EPB /4 4 Hole Round Pads - Bright Dipped BRUSHED - EP STYLE - NEW! EPB /2 1/4 EPB /4 EPB-404OS 4 1/4 (offset) EPB /2 1/4 EPB /4 4 4-Hole Round Pad Bright Dipped Brushed (B) Marine 08 website: info@easternmetal.com version: 03/15/17
3 Round Marine Pads - (Packaged in pairs) MILL FINISH PADS 3-Hole Round Pads - MILL FINISH - Standard Edge MF 2.5 #10 (5/16 Threaded Center Hole; Mill Finish) (mates with D for folding/pivoting backrest supports) D-303-MF* 3 #10 (Mill Finish) SPECIAL ORDER 3 (D-303A-MF) 1/4 (Mill Finish) D-353-MF* 3.5 1/4 (Mill Finish) SPECIAL ORDER 3.5 (D-353-NCS-MF) 1/4 (Mill Finish - no counter sink) D-403-MF 4 1/4 (Mill Finish) D-403-NCS-MF 4 1/4 (Mill Finish - no counter sink) D NCS-MF 4 1/4 (Mill Finish - no counter sink; 1-1/2 center hole) D-453-MF 4.5 1/4 (Mill Finish) D-453-NCS-MF 4.5 1/4 (Mill Finish - no counter sink) D-503-MF 5 1/4 (Mill Finish) D Standard Edge Style 4-Hole Round Pads - MILL FINISH - Standard Edge D-304-MF 3 #10 (Mill Finish) SPECIAL ORDER 3.5 (D-354-MF) 1/4 (Mill Finish) D-404-MF 4 1/4 (Mill Finish) D-404OS-NCS-MF 4 1/4 (Mill Finish; Offset - no counter sink) D-454-MF 4.5 1/4 (Mill Finish) D-504-MF 5 1/4 (Mill Finish) 3 Hole Round Disc - MILL FINISH - EP STYLE EP-303-MF 3 1/4 (Mill FInish) EP-353-MF 3.5 1/4 (Mill FInish) EP-403-MF 4 1/4 (Mill FInish) EP Edge Style 4 Hole Round Disc - MILL FINISH - EP STYLE EP-404-MF 4 1/4 (Mill FInish) Center Hole Only - Round Disc - D STYLE - NEW! Stock Code Size in Inches Description D-300-CH 3 x.250 1/4 Center Hole (Polished - 1/4 fastener) D-400-CH 4 x.250 1/4 Center Hole (Polished - 1/4 fastener) D-401 (NC) 4 x.250 1/4 Center Hole (Polished - 1/4 fastener) D-500-CH 5 x.250 1/4 Center Hole (Polished - 1/4 fastener) D-501 (NC) 5 x.250 1/4 Center Hole (Polished - 1/4 fastener) 4 Center Hole Only Round Pad High Polished x.375 3/8 Threaded Center Hole (Light Machined) D-400-TCH-MF 4 x.375 3/8 Threaded Center Hole (Mill Finish) D-400-TCH 4 x.375 3/8 Threaded Center Hole (Light Machined) D-400-TCH-HP 4 x.375 3/8 Threaded Center Hole (High Polished) B-400-TCH 4 x.375 3/8 Threaded Center Hole (Brushed) D-500-TCH-MF 5 x.375 3/8 Threaded Center Hole (Mill Finish) D-500-TCH 5 x.375 3/8 Threaded Center Hole (Light Machined) D-500-TCH-HP 5 x.375 3/8 Threaded Center Hole (High Polished) Marine 09 website: info@easternmetal.com version: 06/05/17
4 Rectangular Marine Pads - (Packaged in pairs) POLSHED PADS 2-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped POLISHED RP /2 x 3-1/2 1/4 RP x 4 1/4 4-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped POLISHED SPECIAL ORDER 1-1/2 x 3-1/2 #10 (RP ) RP x 4 1/4 RP /2 x 4 1/4 RP x 4 1/4 RP MF 3 x 4 1/4 (Mill Finish) RP x 4 1/4 (1-1/4 center hole) RP x 4-1/2 1/4 RP /2 x 5 1/4 RP x 6 x 3/8 1/4 RP OB 4 x 6 x 1/4 1/4 RP OB 4 x 6 x 3/8 5/16 4-Hole Rectangular (Radius Corner) Pads - Bright Dipped POLISHED SPECIAL ORDER 2 x 4 1/4 (RP RC) RP RC 3 x 4 1/4 RP RC-MF 3 x 4 1/4 (Mill Finish) HIGH POLISHED PADS Rectangular (Oblong/Shape) Pads - HIGH POLISHED - EP STYLE PEP RC 3 x 4 x Holes (1/4 ): Radius Corner; NOT Oblong PEP OB 3 x 4 x Holes (1/4 ): Oblong PEP OB 3 x x Holes (1/4 ): Oblong PEP OB5 3 x x Holes (1/4 ): Oblong; 1-1/2 Center Hole RC OB 4 x 6 x Holes (5/16 ): Countersunk; 2 Center Hole (6463-T66) RP x 6 x Holes (1/4 ): Oblong; 2-1/2 Center Hole RP x 6 x Holes (.312) Oblong: 2-1/2 Center Hole RP x 6 x Holes (1/4 ): Oblong; 2-1/2 Center Hole RC OB 4.5 x 6.5 x Holes (5/16 ): NO Countersink; (2-3/8 Center Hole (6463-T66) RC OBN 4.5 x 6.5 x Holes (5/16 ): NO Countersink (6463-T66) RC OB3 4.5 x 6.5 x Holes (1/4 ): NO Countersink; 3 Center Hole (6463-T66) RC OB2 4.5 x 6.5 x Holes (1/4 ): Countersunk; 2-3/8 Center Hole (6463-T66) RP OB 5 x 7 x Holes (1/4 ): Oblong RP OB 5 x 7 x Holes (1/4 ): Oblong with 6 Outside Holes BRUSHED PADS 2-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHED RB x 4 1/4 4-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHED RB /2 x 4 1/4 RB OB 3 x 4 1/4 RB MF 3 x 4-1/2 1/4 (Brushed/No Anodize) RB x 4-1/2 1/4 RB /2 x 5 1/4 RB x 6 x 3/8 1/4 RB OB 4 x 6 x 1/4 1/4 4-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHED RB x 4 1/4 RB R 2-1/2 x 4 1/4 RB x 4 1/4 Marine 10 2 Hole Rect. Pads Oblong/Shape Oblong/Shape Pads Polished Oblong/Shape Pads Polished (1-1/4 center hole) Radius Corner Pads Radius Corner Pads Brushed Custom size pads built to your specifications (minimum quantity required) website: info@easternmetal.com version: 06/19/17
5 Miscellaneous Marine Pads - (Packaged in pairs) 2-Hole Oval Pads OP x 3.5 (brushed) 1/4 OP P 2 x 3.5 (polished) 1/4 OP P-MF 2 x 3.5 (mill finish) 1/4 OP B 2.5 x 4 (brushed) 1/4 OP P 2.5 x 4 (polished) 1/4 OP P-MF 2.5 x 4 (mill finish) 1/4 D = Polished B = Brushed Oval Pads Tear Drop Pads - Bright Dipped - Polished TD x 3 (with countersunk hole) Tear Drop Pads Triangular Heart Pads TP /2 1/4 HP x 4 (Polished) 1/4 HB x 4 (Brushed) 1/4 Triangular Heart Pads Heart Pad Diamond Pads DP x 3-1/2 (Polished) 1/4 DB x 3-1/2 (Brushed) 1/4 DB x 4-1/4 (Brushed) 1/4 Diamond Pads Square Pad SB x 1/4 3/16 Outrigger Hard Top Pad Stock Code LHOP-875 Description Outrigger Hard Top Pad Square Pad Pad for Windshield Guard Stock Code Description EPWP-150 (NC) 1-1/2" Round Pad (for 3/4 Pipe; 3/8" threaded center hole) Outrigger Hard Top Pad Windshield Pad Antenna Ratchet Mounting Pads Stock Code Description AP x 2 x 1/4 AP-4 4 x 4x 1/4 Marine 11 Antenna Ratchet Mounting Pads website: info@easternmetal.com version: 04/07/17
6 Special Marine Pads Round Pads - Bright Dipped POLISHED - Standard Edge Fastener D-300-CH 3 x.250 Contains center hole only; countersunk ¼ x.375 Contains center hole only (threaded 3/8-16); countersunk ¼ D-400-CH 4 x.250 Contains center hole only; countersunk ¼ D-500-CH 5 x.250 Contains center hole only; countersunk ¼ * Special Order Round Pads - Bright Dipped BRUSHED - Standard Edge EB-250-CH 2.5 x.250 Contains NON-Threaded Center Hole Only (3/16 ): NO Countersink (6463-T66) EB-300-CH 3 x.250 Contains NON-Threaded Center Hole Only (3/16 ): NO Countersink (6463-T66) B-400-TCH 4 x.375 Contains NON-Threaded Center Hole Only (5/16 ): NO Countersink (6463-T66) A 4.5 x Holes (5/16 ): Countersunk (6061-T6) A 6 x Holes (5/16 ): NO Countersink; NO Center Hole (6061-T6) A * 6 x Holes (5/16 ): Countersunk; 2 Center hole (6061-T6) Round Pads - MILL FINISH - Standard Edge M 4.5 x Holes (5/16 ): NO Countersink (6463-T66) M 6 x Holes (5/16 ): NO Countersink; 2 Center Hole (6061-T6) - Backing Plate Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHED A 4 x 6 x Holes (5/16 ): NO Countersink (6463-T66) A 4 x 6 x Holes (5/16 ): Countersunk (6463-T66) A * 4 x 6 x Holes (5/16 ): NO Countersink; 2 Center Hole (6463-T66) A 4 x 6 x Holes (5/16 ): Countersunk; 2 Center Hole (6463-T66) AA 4 x 12 x Holes (5/16 ): NO Countersink (6463-T66) A 4.5 x 6 x Holes (5/16 ): Countersunk (6061-T6) Rectangular (Oblong/Shape) Pads T66 - MILL FINISH M 4 x 6 x Holes (5/16 ) and 2 Center Hole: NO Countersink M * 4 x 6 x Holes (5/16 ): NO Countersink M 4 x 12 x Holes (5/16 ): NO Countersink and 2-2 Center Holes x 6 x Holes (5/16 ): NO Countersink; 2-2 Center Holes Poling Platform Mounting Pad - Bright Dipped - POLISHED PPMP 3 x 10 x.25 5 Holes 4 Round Hard Top Mounting Pad - Bright Dipped - POLISHED 4RHTMP 4 x.375 (3/8 thread) Sold in set of 2 pads; Hardware NOT included. Hard Top Mounting Pad - Bright Dipped - POLISHED HTMP 4 x x Holes Leaning Post Pad - Bright Dipped - POLISHED LPP x 16 6 Holes Polling Platform Mounting Pad Hard Top Mounting Pad Leaning Post Pad A 4 Round Hard Top Mounting Pad (2 pads) A A AA M M Marine 12 website: info@easternmetal.com version: 11/18/15
PADS - ROUND: STANDARD 2 & 3 HOLE MOUNTING
PADS - ROUND: STANDARD 2 & 3 HOLE MOUNTING (1/4 Thick) (1) & (2) Ref Diameter P/N (2) 2-1/2 PR25D3H14 (1) 2-1/2 PR25D3HS (4) 2-3/4 PR275D3H90 (5) 2-3/4 PR275D2H180 (1) 3 PR3D3HS 3 PR3D3H (3) 3 PR3D3H90
More informationIndustrial Catalog. Index
Index Pg Description 2 Fixture Shapes 3 Tee Mouldings 4 Price Tag moulding 4 Plain Facing 5 CW Systems 8 Flatbar 9 U Channel 11 Angles 13 Caps, Coves & Dividers 17 Marine Metals & Facings 18 Finish Codes
More informationSign Frames & Accessories. Eastern Metal Supply Quality Shapes In Aluminum. 12 Fixed Retainer Sign Frame x 24 6 SF-12R
Signage EMS has an extensive stock of sign frames, raceways & raceway lids, retainers, flex face signage, double tees, half-round posts, and a full line of aluminum standards including Square Tube (Standards
More informationnew! Revolutionary Patented Design
EasyMount Channel Letter Raceway Exclusively Distributed by new! Revolutionary Patented Design 6 EasyMount Raceway Back Wall Bracket x 25 24-63-159 6063-T6 Mates with EasyMount Raceway Face 6 EasyMount
More informationPRICES FOR #40 PUNCHES & #82 DIES SEPTEMBER 1, 2018 PRICE LIST FIRST EDITION
PRICES FOR #40 PUNCHES & #82 DIES RETAIL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. All Prices Are F.O.B. Philip, South Dakota. Minimum Order $25.00 (Net). #40, #45, #49 & SPLIT RING PUNCHES & #82, #86,
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationWagner Die Supply W A G N E R P U N C H E S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL. Diemaking & Diecutting Source and Resource
W A G N E R P U N C H E S www.wagnerdiesupply.com ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL America s Punch Experts - Since 1947. Since we opened our doors in 1947, Wagner has focused on providing
More informationTUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
More information3 THE ARENA 3.1 OVERVIEW Dimensions and Tolerances. [This section includes all modifications through Team Update 10]
3 THE ARENA [This section includes all modifications through Team Update 10] 3.1 OVERVIEW Note: The animated pictures in this section of the manual are for a general visual understanding of the field only.
More informationNominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)
PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads
More informationCLIMBING Pads. Straps Gaffs Spikes Hardware
CLIMBING Pads Straps Gaffs Spikes Hardware Quick Change Aluminum Climbers CTB Tree and Pole Climbing Kit Kit with straps and L pads Patented design give these climbers strength, durability and style Utilizes
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More informationTERMS & OTHER IMPORTANT INFORMATION
PRICEBOOK 2014 TERMS & OTHER IMPORTANT INFORMATION LEAD TIME SHIPPING PAYMENT RETURNS Items in stock ship in 48 hours. Please call for current lead time on items that are not in stock. UPS Ground & Freight
More informationDEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
More informationHP10168 & HP10169 KITS HP10152 / HP10154 / HP10156
HP10168/&HP10154 HP10169/KITS HP10152 HP10156 HP10152: 2" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10154: 4" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10156: 6" AMP
More information7 FORAGE AND HARVESTING
Sickle Assemblies 4560R2 Sickle section, 3" x 3-1/4" underserrated. X-Hvy gauge, Chrome finish. Uses rivet RIV101. 142669H L. FT, SECTION NUMBER 141198, TYPE UND 14260 STEEL HEAT THREADED HEADS. Section
More informationTactical Ballistic Helmet II (TBH II )
Care and Use Instructions Tactical Ballistic Helmet II (TBH II ) Mission Configurable (MC) TBH II MC TBH II HC-MC TBH II HST-MC 2013 Gentex Corporation When you replace components or install additional
More informationSub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171
Transformer Business Department Regulator & Inductive Products Sub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171 Last Update 11-19-2013 Tom Dauzat,
More informationTable of Contents FIRST 2005 FIRST Robotics Competition Manual: Section 3 The Arena rev B Page 1 of 8
Table of Contents 3 THE ARENA...2 3.1 OVERVIEW...2 3.1.1 Dimensions and Tolerances...3 3.2 PLAYING FIELD...4 3.2.1 Boundaries and Markings...4 3.2.2 Goals...5 3.2.3 Center Goal...5 3.2.4 Tetra Loading
More informationPull Handles & Push Plates General hardware
Pull Handles & Push Plates General hardware The Legge range of push and pull plates are ideally suited to heavy duty applications such as hospitals, schools and high usage public facilities. The products
More informationParts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE
COMMERCIAL CLEANING EQUIPMENT MODELS: Parts Manual (EN) 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE Read the Operators Manual before using the machine. Read the Safety Messages before servicing machine.
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationOutdoor Basketball Units - Square Posts
72 Outdoor Basketball Units - Square Posts Best Quality Outdoor Units Available with Acrylic or Glass s at Great s! Pole Sizes: 6, 5 and 4 Square Powder Coated Black LS-200 (Shown with optional PP-66 pole
More informationParts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' Disk 26'' Disk 28'' Disk. 24'' Cylindrical 24'' EDGE 28'' EDGE
COMMERCIAL CLEANING EQUIPMENT MODELS: Parts Manual (EN) 20'' Disk 26'' Disk 28'' Disk 24'' Cylindrical 24'' EDGE 28'' EDGE Read the Operators Manual before using the machine. Read the Safety Messages before
More informationRig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05
26 PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type, less than 1/2 weight of chromed
More informationDE8410 FIVB Official Beach Volleyball Net
DE8410 FIVB Official Beach Volleyball Net User s Manual For Safety Use Caution Misuse causes unexpected injury and net damages. Keep the net away from solid and sharp materials. Keep the rope away from
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationAssembly, Installation, Care, Maintenance and Use Instr uctions.
UPPER BOUNCE Enclosure Set & Enclosure Net USER MANUAL Assembly, Installation, Care, Maintenance and Use Instr uctions. This Instructions manual is for Upper Bounce Enclosure Sets and Enclosure Nets which
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO
P# 0 DRILL 1/4" DIA. X.20 DP. (4) EQUALLY SPACED ON A.530 DIA. B.H.C. 1.625 DIA 1/8" SLOT X.05 DEEP (2).6875 RAD.5625 RAD.5962 Events ID On Print 10 Points.1875 Tool List 10 Points Events ID On Print Plot
More informationthreaded rod Keystock Diamond Case Linear Shafting strapping seals tools
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4
More informationAssembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for
More informationMSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
More informationSpecial square punch with flattened corners
Special square punch with flattened corners Mild steel (St37), plastic and aluminium to 2.0 Punching of burr-free openings 12.7 dia pilot drill 503102 Punch including punch, die, draw stud, counter nut
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationwalk with independence
walk with independence Lightweight www.novamedicalproducts.com WARNING Failure to follow any or all safety instructions may result in serious injury or death. adjustment and usage yourself or ambulate
More informationFootball Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
More informationGUARD RAIL HEIGHT 42" STANDARD FIN. FLR. 12" MAX ANCHOR SPACING WILL DEPEND ON MOUNTING SUBSTRATE AND REGION OF PROJECT
FIN. FLR. STANDARD 8" TO 60" STD. PANEL WIDTH CRL SURFACE MOUNT TYPICAL GLASS RAILING ELEVATION VIEW - 8" TO 60" STD. PANEL WIDTH 1 MAX HORIZONTAL CAP RAIL TYPICAL BUTT JOINTS BETWEEN GLASS PANELS ANCHOR
More informationV-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1
ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH
More informationE10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
More informationOrder No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationTEES PLEASE GOLF RELATED CUSTOM PRINTED PROMOTIONAL ITEMS
TEES PLEASE 1-520-888-0899 Tucson, AZ GOLF RELATED CUSTOM PRINTED PROMOTIONAL ITEMS WOOD GOLF TEES 1000 2000 5000 20,000 50,000 100,000 na na na 73.00 66.00 52.00 47.00 42.00 40.00 39.00 83.00 76.00 62.00
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationReferences, characteristics. References (1) Complementary characteristics not shown under general characteristics (page 30395/3)
References, characteristics Electromechanical pressure switches For power circuits, type XMP. IP degree of protection Size (87 psi). Adjustable differential, for regulation between thresholds Switches
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationWe can make custom parts that work with many top office furniture manufacturers such as:
About Premium Machine and Tool Premium Machine and Tool, Inc. specializes in the manufacturing of custom office furniture parts and hardware. All of our work is performed in our Lyons, Michigan manufacturing
More informationDimensions & Specifications
Dimensions & Specifications These pages illustrate our commonly used punches, dies and related tooling for Mubea Ironworkers. Refer to our Cross Reference Catalog for the proper tooling to fit your machine.
More informationMount the actuator in the bracket provided and install a 24-foot EFTC cable to the actuator.
. Mount the actuator in the bracket provided and install a 4-foot EFTC cable to the actuator. Route the cable through left stanchions,, and 4. Be sure that the cable does not contact any spring or push
More information2011 RowWing ASSEMBLY INSTRUCTIONS. Congratulations on your purchase of a RowWing!
2011 RowWing ASSEMBLY INSTRUCTIONS Congratulations on your purchase of a RowWing! STERN BOW 1. Monorail 2. Rigger Wing 3. Port Oarlock 4. Port Stern Stay 5. Stern Stay Tower 6. Piantedosi Decal 7. Port
More informationSEADUCER BOATS GAS SPORT HYDRO
SEADUCER BOATS GAS SPORT HYDRO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 2 - Pkg. Of 440 push rod ends 2 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 30" flex
More informationADA Training Accessible Pedestrian Signal (APS) 2018 MnDOT
ADA Training Accessible Pedestrian Signal (APS) 2018 MnDOT APS and ADA APS is not currently an ADA Standard and is provided at the discretion of the Title II entity APS is recognized in the MnMUTCD, but
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationFoundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
More informationHydraulic and Electrical Service Loop Pins
Product Bulletin # TDS-164 Hydraulic and Electrical Service Loop Pins Affected Units All Canrig top drive models with a hydraulic and electrical service loop installed. Service Loop Pins The ends of the
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationNICROS-GRANITPANELS INSTALLATION MANUAL
NICROS-GRANITPANELS INSTALLATION MANUAL NICROS, INC. 845 PHALEN BLVD. ST. PAUL, MN 55106 PHONE: 651.778.1975 FAX: 651.778.8080 THANK YOU FOR YOUR PURCHASE OF THIS NICROS PRODUCT Nicros-GranitPanels are
More informationTroyer s Gourd Rack 8 unit F R H O P
B E A D I M-N L Vertical Parts F R H O P Horizontal Parts C G J Updated 11/16 Parts List A: Top of Pole B: Bottom of Pole C: 48 Ground Stake D: Top Perch rods 48 long E: Hub F: Rope Winder w/ attached
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationFIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
More information2018 ACCESSORY ATTACHMENTS OWNER S MANUAL
2018 ACCESSORY ATTACHMENTS OWNER S MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV031418 Welcome Thanks you
More informationI.H.S INSTALLATION INSTRUCTIONS
I.H.S INSTALLATION INSTRUCTIONS TOOLS REQUIRED The following tools will be required for installation of your I.H.S. system. Item Qty Needed 9/16 Open End Wrench 2 3/4 Open End Wrench 1 1/2 Open End Wrench
More information3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS
A GENERAL TOWER & SITE ACCESSORIES 3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS 3 6 Tower Leg 2.38 O.D. x 5 Long Mounting Tube Tower Leg 2.38 O.D. x 5 Long Mounting Tube 3 Side Arm 6 Side Arm UNIVERSAL
More informationfischer Epoxy Mortar FIS EB The basic epoxy mortar for applications in concrete
fischer Epoxy Mortar FIS EB The basic epoxy mortar for applications in concrete For standard applications in concrete and rebar connections. Advantages at a glance Epoxy mortar for applications in concrete
More informationTOP GUN & COMPACT SERIES
TOP GUN & COMPACT SERIES REVOLUTION TOP GUNS This innovative outrigger base is great for new installations or retrofits on both hard or soft tops. Rupp Revolution Top Guns offer an efficient and flexible
More informationHARDWARE. Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessories... A4...
front line Table of Contents A4 1 HARDWARE Section Page Push / Pulls... A4... 2 Pivots... A4... 3 Hinges, Locks and Cylinders... A4... 4 Handles, Locks and Accessies... A4... 5 Exit Devices... A4... 6
More informationShade Sails - Installation Tips
Shade Sails - Installation Tips Shade Sails Installation Suggestions Design and Layout: Shade Sails can be mounted in a variety of ways. Sails can be mounted flat or with high and low points. A flat sail
More informationRADROVER REAR RACK INSTALLATION MANUAL
RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for
More informationBull s-eye Levels and Screw-On Levels
Bull s-eye Levels and Screw-On Levels Technical information Definition of terms A spirit level is a hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an
More informationLUMINAIRES PAUL GRÉGOIRE INC
LUMINAIRES PAUL GRÉGOIRE INC 601012 WS8324-CH WS8424-CH Cylinder shaped white opal glass Size - W5 x H19-1/2 x E3-1/2 Cylinder shaped white opal glass Size - W4-3/4 x H24 x E2-5/8 Rectangular shaped white
More informationFree Computer Design Tools For The Richard Joyner Offset Pendant Chucks By: Bill Kloepping, February 2018
Free Computer Design Tools For The Richard Joyner Offset Pendant Chucks By: Bill Kloepping, February 2018 Free Excel spreadsheets allow you to quickly see how different chuck set-up combinations look when
More informationBUILDERS HARDWARE SECTION 6 INDEX
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleasant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
More informationUSES AND APPLICATIONS
MULTIVER USES AND APPLICATIONS DATA SHEET / Quebec Version 2.0 Multiver For those who wish to add a unique touch to their home, Multiver offers a large selection of grilles to create architectural windows
More informationE3F2 Series DC Cylindrical M18 Photoelectric Sensors to be Discontinued March 2014; Replace with E3FA or E3FB
NO: PH-177 PRODUCT: E3F2 DC Photoelectric Sensors DATE: May 2013 TYPE: Partial Discontinuation Notice E3F2 Series DC Cylindrical M18 Photoelectric Sensors to be Discontinued March 2014; Replace with E3FA
More informationGilman Gear 2012 Price List Effective January 1, 2012
RP284 ADJUSTABLE CROSSBAR REPLACEMENT (EACH) 1,400.00 RP274 BLADDER-GIANT PUSHBACK 40.00 RP101 BLADDER-PNEUBACK TOP 135.00 RP102 BLADDER-ROLLBACK RING 70.00 RP103 BLADDER-ROLLBACK TOP 185.00 RP106 BULLSEYE
More informationInjection mortar FIS VL
Injection mortar FIS VL The solid injection mortar for standard applications in cracked concrete and masonry High-bay warehouses BUILDING MATERIALS Approved for anchorings in: Concrete C20/25 to C50/60,
More informationAppendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade
Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade 143 Northeaster Dory Sailing Rig Upgrades: Adding sail track, an outhaul, and camcleats for the jib We ll start with the mast.
More informationPhoto Coming. Utility Anchors. macleanpower.com
Photo Coming Utility Anchors macleanpower.com Utility Anchors MPS Utility Anchors MacLean Power Systems has served the utility anchor market for over 90 years. With a rich history of quality, innovation
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationLIFTING MAGNETS ERIEZ MAGNETICS
MJ-2300E Installation, Operation and Maintenance Instructions LIFTING MAGNETS ERIEZ MAGNETICS HEADQUARTERS: 2200 ASBURY ROAD, P.O. BOX 10608, ERIE, PA 16514 0608 U.S.A. WORLD AUTHORITY IN ADVANCED TECHNOLOGY
More informationWHOLESALE PRICING. GLASS THICKNESS 1/8" 3/16" 1/4" 3/8" 1/2" 1/4" Lami
WHOLESALE PRICING CUSTOM GLASS & MIRROR 1/4" Lami Clear $1.76 $2.44 $2.52 $5.05 $6.43 $6.60 Bronze Grey $4.00 $4.12 $5.00 Greylite 14/Midnight CALL Clear Mirror $3.16 $3.65 $3.65 Bronze or Grey Mirror
More informationunittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC
CATALOG F&D-91 TOOLING for Fabricating & Duplicating Type Machines INTRODUCING New! 1/2" & 5/8" Drop In Tooling unittool punch & die company TOOLING FOR FABRICATING & DUPLICATING TYPE MACHINES Manufactured
More informationAssembly Guide ST200 FUNCTIONAL TRAINER
Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before proceeding,
More informationASSORTED FIXTURE TRIM
... ASSORTED FIXTURE TRIM RIGHT SHAPES RIGHT PRICE RIGHT NOW CHANNEL CAP ALUMINUM CHANNEL CAP FOR 3/4" MATERIAL EM 3197, BC, SS ALUMINUM CHANNEL CAP FOR 5/8" MATERIAL EM 3198, BC, SS VINYL CHANNEL CAP
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationCOLT AUTOMATIC PISTOL
COLT AUTOMATIC PISTOL CALIBER.22 INSTRUCTIONS FOR ASSEMBLY - DISASSEMBLY CLEANING COLT AIUTOMATIC PISTOL IN 6 INCH OR 4}~2 INCH BARREL.22 Long Rifle, rim fire Cartridge Capacity of Magazine, 10 Shots Description
More informationTHE ARENA TABLE OF CONTENTS 6 THE ARENA OVERVIEW Dimensions and Tolerances... 2
Section 6 THE ARENA TABLE OF CONTENTS 6 THE ARENA... 2 6.1 OVERVIEW... 2 6.1.1 Dimensions and Tolerances... 2 6.2 PLAYING FIELD... 4 6.2.1 Boundaries and Markings... 4 6.2.2 The RACK... 5 6.3 GAME PIECES...
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationCITY OF FERNANDINA BEACH, FLORIDA
CITY OF FERNANDINA BEACH, FLORIDA ADDENDUM ONE FOR INVITATION TO BID ITB #16-02 EGANS CREEK FISHING PIER AND KAYAK LAUNCH Prepared By: City of Fernandina Beach 204 Ash Street Fernandina Beach, FL 32034
More informationADA COMPLIANCE CHECKLIST (RESTAURANT) Meet Fail N/A. Parking Lot
ADA COMPLIANCE CHECKLIST (RESTAURANT) Parking Lot Tow away warning at entrance to lot Accessible spaces - minimum 1, and at least 1 for each 25 spaces (e.g., 26 spaces requires 2 accessible spaces) Accessible
More informationThis document to be used with Hurley traditional Davits
~ InstructIon Manual ~ This document to be used with Hurley traditional Davits WarnIngs WarnIng - Failure to install, maintain, protect, and operate the system properly can cause malfunction resulting
More informationDIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D
OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D LUBRICATE DAILY: A. Gears inside gear housing at chuck shaft (1) Oil B. Seam rolls and cam rolls (4) - Oil C. Seam roll levers through gear
More informationtubular EntrancE sets 6
tubular entrance sets Item Qty Part No. Part Name 1 1 6420.xxx.00052 Cylinder Collar 2 1 6420.xxx.00012 Large Plate 3 1 6420.xxx.00022 Small Plate 4 1 2598.xxx.00013 Door Pull 5 1 5300.xxx.95115 Thumbpiece
More informationArbor Terminator Press Operation Manual For IDT Connectors Order No Engineering No: AM
Arbor Terminator Press Operation Manual For IDT Connectors Order No. 11-20-0815 Engineering No: AM7223-140 Description Operation Maintenance Order No: TM-011200815 Release Date: 03-08-12 UNCONTROLLED COPY
More informationReynolds Technology Ltd
Reynolds Technology Ltd Reynolds Technology Ltd, Building 21, Shaftmoor Industrial Estate, 226 Shaftmoor Lane, Hall Green, Birmingham B28 8SP Cycle Frame Tube Price List - 1st January 2017 Payment by TT,
More information