AS Australian Standard. Guide to swimming pool safety. This is a free 7 page sample. Access the full version online.

Size: px
Start display at page:

Download "AS Australian Standard. Guide to swimming pool safety. This is a free 7 page sample. Access the full version online."

Transcription

1 AS Australian Standard Guide to swimming pool safety

2 This Australian Standard was prepared by Committee CS/34, Safety of Private Swimming Pools. It was approved on behalf of the Council of Standards Australia on 12 March 1993 and published on 26 July The following interests are represented on Committee CS/34: Australian Chamber of Commerce and Industry Australian Chamber of Manufactures Australian Uniform Building Regulations Coordinating Council Child Accident Prevention Foundation of Australia Department of Housing, Local Government and Planning, Queensland Department of Local Government and Co operatives, N.S.W. Fence Industry Association of Australia Health Department, Western Australia Metal Trades Industry Association of Australia National Injury Surveillance Unit National Safety Council of Australia (S.A. Division) Office of Planning and Urban Development, South Australia Pool Fencing Action Group, N.S.W. Pool Owners Objection Lobby, Queensland Swimming Pool and Spa Association of Australia Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto. Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue of Publications; this information is supplemented each month by the magazine The Australian Standard, which subscribing members receive, and which gives details of new publications, new editions and amendments, and of withdrawn Standards. Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made without delay in order that the matter may be investigated and appropriate action taken. This Standard was issued in draft form for comment as DR

3 AS Australian Standard Guide to swimming pool safety First published as part of SAA M Second edition Revised and redesignated AS Second edition Revised and designated in part as AS PUBLISHED BY STANDARDS AUSTRALIA (STANDARDS ASSOCIATION OF AUSTRALIA) 1 THE CRESCENT, HOMEBUSH, NSW 2140 ISBN

4 PREFACE This Standard was prepared by the Standards Australia Committee on Safety of Private Swimming Pools to supersede (in part) AS , Guide to swimming pool safety. During preparation of a previous edition of this Standard, the Committee looked into the problem of serious injuries resulting from diving into private swimming pools. It was considered that no private swimming pool could be considered as absolutely safe for the inexperienced person to dive into. Minimum dimensions for diving pools were therefore not included. This decision has been reviewed and reconfirmed. This edition incorporates the following major changes from the previous edition: (a) Requirements for location to pool fencing are now included in AS (Int), Swimming pool safety, Part 2: Location of fencing for private swimming pools. (b) Clauses on skimmer boxes and suction points are now included in AS , Swimming pool safety, Part 3: Water recirculation and filtration systems. AS will be withdrawn following substantial regulatory implementation of this edition, or within two years of publication of this edition, whichever is the earlier. Copyright STANDARDS AUSTRALIA Users of Standards are reminded that copyright subsists in all Standards Australia publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from Standards Australia. Permission may be conditional on an appropriate royalty payment. Requests for permission and information on commercial software royalties should be directed to the head office of Standards Australia. Standards Australia will permit up to 10 percent of the technical content pages of a Standard to be copied for use exclusively in house by purchasers of the Standard without payment of a royalty or advice to Standards Australia. Standards Australia will also permit the inclusion of its copyright material in computer software programs for no royalty payment provided such programs are used exclusively in house by the creators of the programs. Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever the Standard is amended or revised. The number and date of the Standard should therefore be clearly identified. The use of material in print form or in computer software programs to be used commercially, with or without payment, or in commercial contracts is subject to the payment of a royalty. This policy may be varied by Standards Australia at any time.

5 CONTENTS Page FOREWORD SCOPE REFERENCED DOCUMENTS RELATED STANDARDS DEFINITIONS RESPONSIBILITY FOR SUPERVISION LEGAL LIABILITY UNDERWATER DIMENSIONS DIVING POOL FENCING POOL COVERS WARNING DEVICES AND ALARMS ABOVE GROUND POOLS INSTRUCTIONS SAFETY FEATURES SAFETY IN POOL MAINTENANCE ELECTRICAL SAFETY SAFETY IN POOL USE

6 AS FOREWORD The effectiveness of any installed safety measures is dependent on their proper use or observance by the pool user. It is intended that the pool owner, having regard to the information and recommendations in this guide should determine which safety considerations are appropriate for the particular situation. The Standard includes recommendations on aspects of pool safety which relate to persons of all ages. The recommendations set out are mainly concerned with preventive safety rather than first-aid measures, which are already well established and widely publicized. Recommendations in this Standard reduce the risk of injury or drowning but do not reduce the importance of competent supervision nor the responsibility of the pool owner.

7 5 AS STANDARDS AUSTRALIA Australian Standard Guide to swimming pool safety 1 SCOPE This Standard provides guidance on the prevention of accidental drownings and injuries in private swimming pools and spa pools and identifies potential hazards in the use and maintenance of private swimming pools. Requirements for swimming pool safety are given in Parts 1, 2 and 3 of AS Design features for private spa pools are specified in AS REFERENCED DOCUMENTS The following documents are referred to in this Standard: AS 1926 Swimming pool safety Part 1: Fencing for swimming pools Part 2: Location of fencing for private swimming pools* Part 3: Water recirculation and filtration systems 2610 Spa pools Part 2: Private spas 3000 SAA Wiring Rules 3190 Approval and test specification Residual current devices (current-operated earth-leakage devices) 3633 Private swimming pools Water quality 3 RELATED STANDARDS Attention is drawn to the following related Standards: AS 1838 Swimming pools Premoulded fibre reinforced plastics Design and fabrication 1839 Swimming pools Premoulded reinforced plastics Installation 2020 Safety covers for private swimming pools and wading pools (for the protection of children 5 years of age and under) 2160 Contract for the supply and construction of a swimming pool 2783 Use of reinforced concrete for small swimming pools 3634 Solar heating systems for swimming pools 4 DEFINITIONS For the purpose of this Standard, the definitions given in AS and those below apply. 4.1 Beach area a shallow area within the pool, usually with a sloping floor, suitable for sitting on, lying on or use as an entry or exit for the pool. * First published as an Interim Standard. COPYRIGHT

8 The remainder of this document is available for purchase online at SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4488.2:1997 Australian/New Zealand Standard Industrial rope access systems Part 2: Selection, use and maintenance AS/NZS 4488.2:1997 This Joint Australian/New Zealand Standard was prepared by Joint

More information

Australian Standard. Swimming pool safety. Part 3: Water recirculation systems AS AS

Australian Standard. Swimming pool safety. Part 3: Water recirculation systems AS AS AS 1926.3 2003 AS 1926.3 Australian Standard Swimming pool safety Part 3: Water recirculation systems This Australian Standard was prepared by Committee CS-034, Safety of Private Swimming Pools. It was

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1906.4:1997 Australian/New Zealand Standard Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments AS/NZS 1906.4:1997 This

More information

Australian Standard. Bourdon tube pressure and vacuum gauges AS

Australian Standard. Bourdon tube pressure and vacuum gauges AS AS 1349 1986 Australian Standard Bourdon tube pressure and vacuum gauges [Title allocated by Defence Cataloguing Authority: GAUGES, PRESSURE AND VACUUM (Bourdon Tube Type)... NSC Gp 66] This Australian

More information

AS AS Australian Standard. Spa pools. Part 2: Private spas. This is a free 6 page sample. Access the full version online.

AS AS Australian Standard. Spa pools. Part 2: Private spas. This is a free 6 page sample. Access the full version online. AS 2610.2 2007 AS 2610.2 2007 Australian Standard Spa pools Part 2: Private spas This Australian Standard was prepared by Committee CS-059, Spa Pools. It was approved on behalf of the Council of Standards

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2299.3 Australian/New Zealand Standard Occupational diving operations Part 3: Recreational industry diving and snorkelling operations This Joint Australian/New Zealand Standard was prepared by Joint

More information

Australian Standard. Manual of uniform traffic control devices. Part 3: Traffic control for works on roads AS AS 1742.

Australian Standard. Manual of uniform traffic control devices. Part 3: Traffic control for works on roads AS AS 1742. AS 1742.3 2009 AS 1742.3 2009 Australian Standard Manual of uniform traffic control devices Part 3: Traffic control for works on roads This Australian Standard was prepared by Committee MS-012, Road Signs

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1716:2003 (Incorporating Amendment No. 1) AS/NZS 1716:2003 Australian/New Zealand Standard Respiratory protective devices AS/NZS 1716:2003 This Joint Australian/New Zealand Standard was prepared

More information

Australian Standard. The storage and handling of gases in cylinders AS (Incorporating Amendment No.1) AS

Australian Standard. The storage and handling of gases in cylinders AS (Incorporating Amendment No.1) AS AS 4332 2004 (Incorporating Amendment No.1) AS 4332 2004 Australian Standard The storage and handling of gases in cylinders This Australian Standard was prepared by Committee CH-009, Safe Handling of Chemicals.

More information

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 5: Dive supervisor. Australian/New Zealand Standard

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 5: Dive supervisor. Australian/New Zealand Standard AS/NZS 2815.5:2013 Australian/New Zealand Standard Training and certification of occupational divers Part 5: Dive supervisor Superseding AS 2815.5 2006 AS/NZS 2815.5:2013 AS/NZS 2815.5:2013 This Joint

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1716:2012 AS/NZS 1716:2012 Australian/New Zealand Standard Respiratory protective devices AS/NZS 1716:2012 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee SF-010,

More information

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 2: Surface supplied diving to 30 m

AS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 2: Surface supplied diving to 30 m AS/NZS 2815.2:2013 Australian/New Zealand Standard Training and certification of occupational divers Part 2: Surface supplied diving to 30 m AS/NZS 2815.2:2013 AS/NZS 2815.2:2013 This Joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2210.3:2009 AS/NZS 2210.3:2009 Australian/New Zealand Standard Occupational protective footwear Part 3: Specification for safety footwear (ISO 20345:2004, MOD) AS/NZS 2210.3:2009 This Joint Australian/New

More information

AS/NZS :2010. Retroreflective materials and devices for road traffic control purposes AS/NZS :2010

AS/NZS :2010. Retroreflective materials and devices for road traffic control purposes AS/NZS :2010 Australian/New Zealand Standard AS/NZS 1906.4:2010 Incorporating Amendment No. 1 Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments

More information

AS/NZS :2017. Retroreflective materials and devices for road traffic control purposes AS/NZS :2017. Part 1: Retroreflective sheeting

AS/NZS :2017. Retroreflective materials and devices for road traffic control purposes AS/NZS :2017. Part 1: Retroreflective sheeting AS/NZS 1906.1:2017 Australian/New Zealand Standard Retroreflective materials and devices for road traffic control purposes Part 1: Retroreflective sheeting Superseding AS/NZS 1906.1:2007 AS/NZS 1906.1:2017

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1891.4:2009 AS/NZS 1891.4:2009 Australian/New Zealand Standard Industrial fall-arrest systems and devices Part 4: Selection, use and maintenance AS/NZS 1891.4:2009 This Joint Australian/New Zealand

More information

AS/NZS 1596:2014. The storage and handling of LP Gas AS/NZS 1596:2014. Australian/New Zealand Standard. Superseding AS/NZS 1596:2008

AS/NZS 1596:2014. The storage and handling of LP Gas AS/NZS 1596:2014. Australian/New Zealand Standard. Superseding AS/NZS 1596:2008 AS/NZS 1596:2014 Incorporating Amendment No. 1 Australian/New Zealand Standard The storage and handling of LP Gas Superseding AS/NZS 1596:2008 AS/NZS 1596:2014 AS/NZS 1596:2014 This joint Australian/New

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 1715:2009 AS/NZS 1715:2009 Australian/New Zealand Standard Selection, use and maintenance of respiratory protective equipment AS/NZS 1715:2009 This Joint Australian/New Zealand Standard was prepared

More information

BRITISH STANDARD BS 341-4: Transportable gas container valves. Part 4: Pressure relief devices ICS

BRITISH STANDARD BS 341-4: Transportable gas container valves. Part 4: Pressure relief devices ICS BRITISH STANDARD BS 341-4:2004 Transportable gas container valves Part 4: Pressure relief devices ICS 23.060.40 This British Standard, having been prepared under the direction of the Standards Policy and

More information

AS SSA AS SSA Australian Standard. Australian Fish Names Standard. This is a free 8 page sample. Access the full version online.

AS SSA AS SSA Australian Standard. Australian Fish Names Standard. This is a free 8 page sample. Access the full version online. AS SSA 5300 2007 AS SSA 5300 2007 Australian Standard Australian Fish Names Standard This Australian Standard was prepared by Seafood Services Australia Limited. As an accredited Standards Development

More information

RepublicofSouthAfrica

RepublicofSouthAfrica RepublicofSouthAfrica EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticeforal, abeterinformedcitizenry,theruleoflaw,worldtradeandworldpeace, thislegaldocumentisherebymadeavailableonanoncommercialbasis,asit

More information

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-20190-6 Any reference to SABS 0134 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The safeness of private swimming

More information

IS First edition

IS First edition INTERNATIONAL STANDARD IS0 286-2 First edition 1988-06-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXAYHAPOAHAR OPTAHM3A~Mfl IlO CTAHJJAPTM3A~MM IS0

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Fitting of valves to gas cylinders. Bouteilles à gaz Montage des robinets sur les bouteilles à gaz

ISO INTERNATIONAL STANDARD. Gas cylinders Fitting of valves to gas cylinders. Bouteilles à gaz Montage des robinets sur les bouteilles à gaz INTERNATIONAL STANDARD ISO 13341 Second edition 2010-10-01 Gas cylinders Fitting of valves to gas cylinders Bouteilles à gaz Montage des robinets sur les bouteilles à gaz Reference number ISO 13341:2010(E)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13289 First edition 2011-12-01 Recreational diving services Requirements for the conduct of snorkelling excursions Services relatifs à la plongée de loisirs Exigences pour la

More information

ISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods

ISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods INTERNATIONAL STANDARD ISO 14790 Second edition 2005-02-01 Snowboard plate-bindings without a release mechanism Requirements and test methods Fixations de surf des neiges de type à plaque sans mécanisme

More information

ICC Uniform Rules for. Collections

ICC Uniform Rules for. Collections ICC Uniform Rules for Collections 1995 Revision in force as of January 1, 1996 The ICC Uniform Rules for Collections were first published by the ICC in 1956. Revised versions were issued in 1967 and 1978.

More information

POOL & SPA/HOT TUB APSP STANDARDS AS REFERENCED IN THE 2009 INTERNATIONAL CODES

POOL & SPA/HOT TUB APSP STANDARDS AS REFERENCED IN THE 2009 INTERNATIONAL CODES POOL & SPA/HOT TUB APSP STANDARDS AS REFERENCED IN THE 2009 INTERNATIONAL CODES APSP Standards: As Referenced in the 2009 International Codes Publication Date: June 2010 ISBN-978-1-58001-662-9 PUBLISHED

More information

5. Clearances- Fingerprinting and Training Requirements. 7. Record Keeping and Reporting Responsibilities

5. Clearances- Fingerprinting and Training Requirements. 7. Record Keeping and Reporting Responsibilities The Office of Children and Family Services Residential Pool Guidelines (Updated 8-6-08) Table of Contents: 1. Regulations Pertinent to Residential Pool Use 2. Operation Requirements 3. Pool Safety Plan

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition

ISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition INTERNATIONAL STANDARD ISO 11625 Second edition 2007-08-15 Gas cylinders Safe handling Bouteilles à gaz Sécurité de manutention Reference number ISO 2007 PDF disclaimer This PDF file may contain embedded

More information

Gear hobs Accuracy requirements

Gear hobs Accuracy requirements BRITISH STANDARD Gear hobs Accuracy requirements ICS 21.200 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS ISO 4468:2009 BS ISO 4468:2009 This British Standard was published

More information

TYPE F. Home Pools GUIDELINES FOR SAFE POOL OPERATION DOMESTIC POOLS SLSQ ANNUAL REPORT 14 15

TYPE F. Home Pools GUIDELINES FOR SAFE POOL OPERATION DOMESTIC POOLS SLSQ ANNUAL REPORT 14 15 0 TYPE F Home Pools GUIDELINES FOR SAFE POOL OPERATION DOMESTIC POOLS SLSQ ANNUAL REPORT 14 15 Royal Life Saving Bahrain Royal Life Saving Bahrain (RLSB) is a charity registered under the Ministry of Social

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 6605 Third edition 2017-06 Hydraulic fluid power Test methods for hoses and hose assemblies Transmissions hydrauliques Méthodes d essai pour les tuyaux et flexibles Reference

More information

Appendix A ORDINANCE NO. An ordinance amending Chapter 43A, Swimming Pools, of the Dallas City Code by amending

Appendix A ORDINANCE NO. An ordinance amending Chapter 43A, Swimming Pools, of the Dallas City Code by amending Appendix A 4-22-16 ORDINANCE NO. An ordinance amending Chapter 43A, Swimming Pools, of the Dallas City Code by amending Sections 43A-1, 43A-3, 43A-6, 43A-20 and 43A-21; amending Article I, General Provisions,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13970 First edition 2011-12-01 Recreational diving services Requirements for the training of recreational snorkelling guides Services relatifs à la plongée de loisirs Exigences

More information

ISO 9244 INTERNATIONAL STANDARD. Earth-moving machinery Machine safety labels General principles

ISO 9244 INTERNATIONAL STANDARD. Earth-moving machinery Machine safety labels General principles INTERNATIONAL STANDARD ISO 9244 Second edition 2008-06-15 Earth-moving machinery Machine safety labels General principles Engins de terrassement Étiquetage de sécurité de la machine Principes généraux

More information

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor INTERNATIONAL STANDARD ISO 15970 First edition 2008-06-15 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor Gaz naturel Mesurage des caractéristiques

More information

ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales

ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales INTERNATIONAL STANDARD ISO 4344 Second edition 2004-02-01 Steel wire ropes for lifts Minimum requirements Câbles en acier pour ascenseurs Exigences minimales Reference number ISO 2004 PDF disclaimer This

More information

ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 2: Housing dimensions for general applications

ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 2: Housing dimensions for general applications INTERNATIONAL STANDARD ISO 3601-2 First edition 2008-06-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et pneumatiques Joints toriques Partie

More information

AUSTRALIAN BRED FOALS THAT RACE - BY AGE

AUSTRALIAN BRED FOALS THAT RACE - BY AGE Australian Bred Foals That Race - 2YOs Racing Season 2001/02 2005/06 2008/09 2009/10 2010/11 2011/12 2012/13 2013/14 2014/15 2015/16 Starters Total 13,457 12,949 12,562 12,521 12,496 12,175 11,837 11,377

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10651-5 First edition 2006-02-01 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators

More information

BUILDING STANDARDS INFORMATION BULLETIN 17-08

BUILDING STANDARDS INFORMATION BULLETIN 17-08 DEPARTMENT OF GENERAL SERVICES 2525 Natomas Park Drive, Suite 130 Sacramento, California 95833-2936 (916) 263-0916 FAX (916) 263-0959 GOVERNOR EDMUND G. BROWN JR BUILDING STANDARDS INFORMATION BULLETIN

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Operational procedures for the safe removal of valves from gas cylinders

ISO INTERNATIONAL STANDARD. Gas cylinders Operational procedures for the safe removal of valves from gas cylinders INTERNATIONAL STANDARD ISO 25760 First edition 2009-06-15 Gas cylinders Operational procedures for the safe removal of valves from gas cylinders Bouteilles à gaz Modes opératoires de dépose en toute sécurité

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-34475-7 ISO 10460:2005 SOUTH AFRICAN NATIONAL STANDARD Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing This national standard is the identical implementation

More information

Ships and marine technology Servicing of inflatable life-saving appliances

Ships and marine technology Servicing of inflatable life-saving appliances ISO 2014 All rights reserved ISO TC 8/SC 1/ WG 1/ N 273 Date: 2016-11-22 ISO/FDIS 18079-3 ISO TC 8/SC 1/WG 1 Secretariat: ANSI Ships and marine technology Servicing of inflatable life-saving appliances

More information

TITLE XIV POOL AND SPA SAFETY

TITLE XIV POOL AND SPA SAFETY Virginia Graeme Baker Pool and Spa Safety Act. 15 USC 8001 note. 15 USC 8001. TITLE XIV POOL AND SPA SAFETY SEC. 1401. SHORT TITLE. This title may be cited as the Virginia Graeme Baker Pool and Spa Safety

More information

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid INTERNATIONAL STANDARD ISO 23181 First edition 2007-08-15 Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid Transmissions hydrauliques Éléments

More information

The National. Drowning Report M 7 F 2 M 11 F 3 M 0 M 45 F 14 F 4 M 69 F 24 M 31 F 0

The National. Drowning Report M 7 F 2 M 11 F 3 M 0 M 45 F 14 F 4 M 69 F 24 M 31 F 0 The National 08 Drowning Report NT M 7 F 2 WA M 30 F 4 SA M 11 F 3 QLD M 45 F 14 NSW M 69 F 24 M - Male (204) F - Female (57) ACT M 0 F 0 VIC M 31 F 10 TAS M 11 F 0 Drowning deaths in 2007/2008 There were

More information

ISO INTERNATIONAL STANDARD. Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General

ISO INTERNATIONAL STANDARD. Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General INTERNATIONAL STANDARD ISO 7146-1 First edition 2008-10-15 Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General Paliers lisses Aspect et caractérisation

More information

ISO INTERNATIONAL STANDARD. Recreational diving services - Requirements for the training of recreational snorkelling guides

ISO INTERNATIONAL STANDARD. Recreational diving services - Requirements for the training of recreational snorkelling guides INTERNATIONAL STANDARD ISO 13970 First edition 2011-12-01 Recreational diving services - Requirements for the training of recreational snorkelling guides Services relatifs a la plongee de loisirs - Exigences

More information

Swimming Pool Requirements

Swimming Pool Requirements Swimming Pool Requirements 1. Definitions: Approved Safety Pool Cover. Means a manually or power-operated safety pool cover that meets all of the performance standards of the American Society for Testing

More information

Part 2: Fluid power systems O-rings. Housing dimensions for general applications

Part 2: Fluid power systems O-rings. Housing dimensions for general applications Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3601-2 Second edition 2016-07-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et

More information

2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE

2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE TITLE 14 CHAPTER 8 PART 3 HOUSING AND CONSTRUCTION PLUMBING CODES 2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE 14.8.3.1 ISSUING AGENCY: Construction Industries Division (CID) of the Regulation and

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13732-1 First edition 2006-09-01 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces Ergonomie des

More information

ISO INTERNATIONAL STANDARD. Breathing system filters for anaesthetic and respiratory use Part 2: Non-filtration aspects

ISO INTERNATIONAL STANDARD. Breathing system filters for anaesthetic and respiratory use Part 2: Non-filtration aspects INTERNATIONAL STANDARD ISO 23328-2 First edition 2002-10-15 Breathing system filters for anaesthetic and respiratory use Part 2: Non-filtration aspects Filtres pour matériel d'anesthésie et de réanimation

More information

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales INTERNATIONAL STANDARD ISO 2944 Second edition 2000-03-15 Fluid power systems and components Nominal pressures Transmissions hydrauliques et pneumatiques Pressions nominales Reference number ISO 2944:2000(E)

More information

ISO INTERNATIONAL STANDARD. Inflatable boats Part 2: Boats with a maximum motor power rating of4,5kwto15kwinclusive

ISO INTERNATIONAL STANDARD. Inflatable boats Part 2: Boats with a maximum motor power rating of4,5kwto15kwinclusive INTERNATIONAL STANDARD ISO 6185-2 First edition 2001-11-15 Inflatable boats Part 2: Boats with a maximum motor power rating of4,5kwto15kwinclusive Bateaux pneumatiques Partie 2: Bateaux équipés d'un moteur

More information

Industry update on Ontario s Public Pools and Recreational Camps Regulations under the Health Protection and Promotion Act

Industry update on Ontario s Public Pools and Recreational Camps Regulations under the Health Protection and Promotion Act Industry update on Ontario s Public Pools and Recreational Camps Regulations under the Health Protection and Promotion Act Health Improvement Policy and Programs Branch July 24, 2018 Purpose: To update

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 61245 Edition 2.0 2015-03 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS

More information

ISO INTERNATIONAL STANDARD. Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance

ISO INTERNATIONAL STANDARD. Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance INTERNATIONAL STANDARD ISO 10425 First edition 2003-08-15 Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance Câbles en acier pour les industries

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 24801-2 Second edition 2014-04-01 Recreational diving services Requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous diver Services relatifs à

More information

ISO INTERNATIONAL STANDARD. Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kw

ISO INTERNATIONAL STANDARD. Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kw INTERNATIONAL STANDARD ISO 6185-1 First edition 2001-11-15 Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kw Bateaux pneumatiques Partie 1: Bateaux équipés d'un moteur d'une puissance

More information

Trackside Warning Signs and Markings

Trackside Warning Signs and Markings Discipline: Engineering (Track & Civil) Category: Standard Trackside Warning Signs and Markings ETM-11-01 Applicability New South Wales CRIA (NSW CRN) Primary Source ARTC Standards BDS 19, RDS 03 and ESS

More information

COMPLIANCE WITH STANDARDS, REGULATIONS AND ORDINANCES

COMPLIANCE WITH STANDARDS, REGULATIONS AND ORDINANCES INTRODUCTION TO THE BUILDER Your safety and that of your family and friends is of vital concern to all of us. When installed and used properly, swimming pools provide many hours of safe, healthy fun and

More information

ISO INTERNATIONAL STANDARD. Personal fall-arrest systems Part 1: Full-body harnesses

ISO INTERNATIONAL STANDARD. Personal fall-arrest systems Part 1: Full-body harnesses INTERNATIONAL STANDARD ISO 10333-1 First edition 2000-07-01 Personal fall-arrest systems Part 1: Full-body harnesses Systèmes individuels d'arrêt de chute Partie 1: Harnais complet Reference number ISO

More information

ISO INTERNATIONAL STANDARD. Cranes and lifting appliances Selection of wire ropes Part 1: General

ISO INTERNATIONAL STANDARD. Cranes and lifting appliances Selection of wire ropes Part 1: General INTERNATIONAL STANDARD ISO 4308-1 Third edition 2003-05-01 Cranes and lifting appliances Selection of wire ropes Part 1: General Grues et appareils de levage Choix des câbles Partie 1: Généralités Reference

More information

Building Code Guidelines for Residential Pools

Building Code Guidelines for Residential Pools Building Code Guidelines for Residential Pools KEEP YOUR POOL SAFE Department of Development and Permits 306 Cedar Road, City Hall 2 nd Floor Chesapeake, VA 23322 Phone: (757) 382-6018 E-mail: develop-permits@cityofchesapeake.net

More information

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 2006 PDF disclaimer

More information

ISO INTERNATIONAL STANDARD. Small craft Watertight cockpits and quick-draining cockpits

ISO INTERNATIONAL STANDARD. Small craft Watertight cockpits and quick-draining cockpits INTERNATIONAL STANDARD ISO 11812 First edition 2001-12-15 Small craft Watertight cockpits and quick-draining cockpits Petits navires Cockpits étanches et cockpits rapidement autovideurs Reference number

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10692-2 First edition 2001-08-01 Gas cylinders Gas cylinder valve connections for use in the micro-electronics industry Part 2: Specification and type testing for valve to cylinder

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10691 First edition 2004-08-15 Gas cylinders Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after filling Bouteilles

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 4302 Second edition 2016-10-01 Cranes Wind load assessment Appareils de levage à charge suspendue Évaluation des charges dues au vent Reference number ISO 4302:2016(E) ISO 2016

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14573 First edition 2002-05-01 Corrected version 2003-05-15 Snowboard strap bindings for soft boots Requirements and test methods Fixations de surf des neiges pour chaussures

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing

ISO INTERNATIONAL STANDARD. Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing INTERNATIONAL STANDARD ISO 22435 First edition 2007-09-01 Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing Bouteilles à gaz Robinets de bouteilles avec détendeur

More information

OHRP Guidance on Written IRB Procedures

OHRP Guidance on Written IRB Procedures Office for Human Research Protections (OHRP) Department of Health and Human Services Date: OHRP Guidance on Written IRB Procedures Scope: This document outlines the required elements of written Institutional

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Specifications and testing of LPG cylinder valves Self-closing

ISO INTERNATIONAL STANDARD. Gas cylinders Specifications and testing of LPG cylinder valves Self-closing INTERNATIONAL STANDARD ISO 14245 First edition 2006-02-15 Gas cylinders Specifications and testing of LPG cylinder valves Self-closing Bouteilles à gaz Spécifications et essais pour valves de bouteilles

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-24871-0 SOUTH AFRICAN NATIONAL STANDARD The selection, use and maintenance of respiratory protective equipment Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag

More information

FEE SCHEDULE POOL PERMIT FEES. Refundable Security (Cash of L.C.) 1 Hot Tub, Spa, etc. $ nil 2 Above Ground Pool $ nil

FEE SCHEDULE POOL PERMIT FEES. Refundable Security (Cash of L.C.) 1 Hot Tub, Spa, etc. $ nil 2 Above Ground Pool $ nil FEE SCHEDULE POOL PERMIT FEES Type of Pool Total Fee Refundable Security (Cash of L.C.) 1 Hot Tub, Spa, etc. $100.00 nil 2 Above Ground Pool $200.00 nil 3 Inground Pools (assumed $350.00 $1500.00 subdivision)

More information

d r o w n i n g r e p o r t 2005 t h e n at i o n a l How Many People Drowned in 2004/05? 259 Male Female

d r o w n i n g r e p o r t 2005 t h e n at i o n a l How Many People Drowned in 2004/05? 259 Male Female t h e n at i o n a l d r o w n i n g r e p o r t 2 How Many People Drowned in 2/? 29 Last year 29 people drowned in Australian waters. The number of people who drowned this year is down on last year s

More information

FINAL EXPRESS TERMS FOR PROPOSED BUILDING STANDARDS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HELATH

FINAL EXPRESS TERMS FOR PROPOSED BUILDING STANDARDS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HELATH FINAL EXPRESS TERMS FOR PROPOSED BUILDING STANDARDS OF THE CALIFORNIA DEPARTMENT OF PUBLIC HELATH REGARDING PROPOSED CHANGES TO THE CALIFORNIA BUILDING STANDARDS, ADMINISTRATIVE CODE CALIFORNIA CODE OF

More information

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2006(E)

More information

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et

More information

IGEM/SR/4 Edition 3 Communication 1752 Variable volume gasholders storing lighter than air gases

IGEM/SR/4 Edition 3 Communication 1752 Variable volume gasholders storing lighter than air gases Communication 1752 Variable volume gasholders storing lighter than air gases Founded 1863 Royal Charter 1929 Patron: Her Majesty the Queen Communication 1752 Variable volume gasholders storing lighter

More information

ISO INTERNATIONAL STANDARD. Flow-metering devices for connection to terminal units of medical gas pipeline systems

ISO INTERNATIONAL STANDARD. Flow-metering devices for connection to terminal units of medical gas pipeline systems INTERNATIONAL STANDARD ISO 15002 Second edition 2008-07-01 Flow-metering devices for connection to terminal units of medical gas pipeline systems Dispositifs de mesure de débit pour raccordement aux prises

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 24802-1 First edition 2007-02-15 Recreational diving services Safety related minimum requirements for the training of scuba instructors Part 1: Level 1 Services relatifs à la

More information

ISO INTERNATIONAL STANDARD. Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate

ISO INTERNATIONAL STANDARD. Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate INTERNATIONAL STANDARD ISO 9444-2 First edition 2009-06-01 Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate Acier inoxydable laminé à chaud en

More information

Safe transport of radioactive materials Leakage testing on packages

Safe transport of radioactive materials Leakage testing on packages INTERNATIONAL STANDARD ISO 12807 Second edition 2018-09 Safe transport of radioactive materials Leakage testing on packages Sûreté des transports de matières radioactives Contrôle de l'étanchéité des colis

More information

ISO INTERNATIONAL STANDARD. Transportable gas cylinders Inspection and maintenance of cylinder valves

ISO INTERNATIONAL STANDARD. Transportable gas cylinders Inspection and maintenance of cylinder valves INTERNATIONAL STANDARD ISO 22434 First edition 2006-09-01 Transportable gas cylinders Inspection and maintenance of cylinder valves Bouteilles à gaz transportables Contrôle et maintenance des robinets

More information

G.B. Collins Engineering, P.A. Comments to Proposed Code Modification SW7074-A1

G.B. Collins Engineering, P.A. Comments to Proposed Code Modification SW7074-A1 G.B. Collins Engineering, P.A. Comments to Proposed Code Modification SW7074-A1 I. REFERENCES: CURRENT CODE PROVISIONS Florida Building Code, 5th Edition (2014) Chapter 4 Special Detailed Requirements

More information

BCGA GUIDANCE NOTE 17

BCGA GUIDANCE NOTE 17 BCGA GUIDANCE NOTE 17 BCGA POLICY AND GUIDANCE FOR THE SAFE FILLING OF THIRD-PARTY OWNED AND / OR MAINTAINED TANKS Revision 2: 2013 BCGA GUIDANCE NOTE 17 BCGA POLICY AND GUIDANCE FOR THE SAFE FILLING OF

More information

Retailer Swimming Pool Package

Retailer Swimming Pool Package Retailer Swimming Pool Package Contents: A) Downloadable Pool Fencing Warning for use by retailers B) Fact Sheet on Inflatable & Above-Ground Swimming Pools for Educational Purposes C) Media release This

More information

ISO 2503 INTERNATIONAL STANDARD

ISO 2503 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 2503 Third edition 2009-07-15 Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied

More information

POOL AND SPA REPLASTERING AND/OR REMODELING REQUIREMENTS

POOL AND SPA REPLASTERING AND/OR REMODELING REQUIREMENTS POOL AND SPA REPLASTERING AND/OR REMODELING REQUIREMENTS Effective January 1, 2017 PLAN SUBMITTAL Any person proposing to renovate, replaster, reconstruct or alter a public pool or its ancillary facilities,

More information

Safe working practices to ensure the integrity of gas assets and associated installations

Safe working practices to ensure the integrity of gas assets and associated installations Communication 1828 Safe working practices to ensure the integrity of gas assets and associated installations Founded 1863 Royal Charter 1929 Patron: Her Majesty the Queen Communication 1828 Safe working

More information

Safety barriers to a swimming pool and spa pool at 130 Wharf Road, Pigeon Bay

Safety barriers to a swimming pool and spa pool at 130 Wharf Road, Pigeon Bay Determination 2010/104 Safety barriers to a swimming pool and spa pool at 130 Wharf Road, Pigeon Bay 1. The matters to be determined 1.1 This is a Determination under Part 3 Subpart 1 of the Building Act

More information

Swimming pool barriers. Schedule 1 - Modifications to the Standard... 5 MP 3.4 SWIMMING POOL BARRIERS. Table of Contents

Swimming pool barriers. Schedule 1 - Modifications to the Standard... 5 MP 3.4 SWIMMING POOL BARRIERS. Table of Contents Table of Contents Purpose... 2 Commencement... 2 Application... 2 Referral Agency... 2 Compliance with the QDC... 2 Relationship between the Standard and this part... 2 Associated Requirements... 2 Referenced

More information

ISO INTERNATIONAL STANDARD. Welding consumables Gases and gas mixtures for fusion welding and allied processes

ISO INTERNATIONAL STANDARD. Welding consumables Gases and gas mixtures for fusion welding and allied processes INTERNATIONAL STANDARD ISO 14175 Second edition 2008-03-01 Welding consumables Gases and gas mixtures for fusion welding and allied processes Produits consommables pour le soudage Gaz et mélanges gazeux

More information

ISO INTERNATIONAL STANDARD. Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis

ISO INTERNATIONAL STANDARD. Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis INTERNATIONAL STANDARD ISO 12213-2 Second edition 2006-11-15 Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Gaz naturel Calcul du facteur de compression

More information