Cartridge Valves Technical Information. Pressure Reducing, Quick Reference

Transcription

1 Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-2 PRC 06 SDC10- NCS06/ Pressure Reducing, Non-Relieving, Direct Acting 40 l/min [10 US gal/min] 40 l/min [10 US gal/min] 210 bar [000 psi] 15 bar [4500 psi] Symbol Model No. Description Flow* Pressure Page CP20-1 SDC10- Pressure Reducing, 40 l/min 210 bar 05.6 Relieving, Direct Acting [10 US gal/min] [000 psi] Pressure Reducing, Relieving Model No. Description Flow* Pressure Page PRR10-PVG SDC10- Pressure Reducing, Relieving, Direct Acting, Designed for PVG Actuators 40 l/min [10 US gal/min] 210 bar [000 psi] 05.7 Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-4 SDC10- Pressure Reducing, 40 l/min 50 bar 05.8 Non-Relieving, [10 US gal/min] [5000 psi] PPRC 06 NCS06/ Pilot Operated 40 l/min 15 bar 05.9 [10 US gal/min] [4500 psi] P10 Pressure Reducing, Relieving Model No. Description Flow* Pressure Page PRMP 064 SDC10- Pressure Reducing, 40 l/min 15 bar CP21- CP12-S Relieving, Pilot Operated [10 US gal/min] 115 l/min [0 US gal/min] [4500 psi] 50 bar [5000 psi] Pressure Reducing, Relieving Model No. Description Flow* Pressure Page PRR10-DRD SDC10-4 Pressure Reducing, Relieving, Direct Acting with Dampening Port 8 l/min [10 US gal/min] 207 bar [000 psi] * Flow ratings are based on a pressure drop of 7 bar [100 psi] unless otherwise noted. They are for comparison purposes only Quick reference

2 Application Notes PRESSURE REDUCING VALVES are pressure limiting devices that limit pressure in one portion of a circuit while leaving system pressure unaffected. They are available in direct-acting and pilot-operated types and as pressure reducing/relieving valves or as pressure reducing valves only. F DIRECT ACTING PRESSURE REDUCING / RELIEVING VALVES Direct-acting pressure reducing/relieving valves allow flow to pass from 2 to 1 until the pressure at 1 reaches the predetermined setting, at which point the spool shifts to restrict input flow from 2 (reducing mode) or to open flow from 1 to (relieving mode) as needed to maintain the regulated pressure at 1. Advantages of direct-acting pressure reducing valves are: Fast response Economical Direct acting pressure reducing valve 1 2 P A typical application for direct-acting pressure reducing valves is for pressure control in systems requiring two or more different pressure settings. These valves are best suited for low flow applications such as hydraulic brake or motor shift. Applications notes 5.2

3 Application Notes PILOT-OPERATED PRESSURE REDUCING / RELIEVING VALVES Pilot-operated pressure reducing/relieving valves operate similarly to direct-acting pressure reducing/relieving valves -- the spool allows flow to pass from 2 to 1 until the pressure at 1 reaches the predetermined setting and forces the pilot poppet off it s seat. This creates a pressure differential across the spool that causes the spool to shift and maintain regulated pressure at 1 in the same manner as the direct-acting pressure reducing/relieving valve. Advantages of pilot-operated relief valves are: Pilot-operated pressure reducing valve Smooth, stable response High pressure capability Precise pressure control with varying flow rates 1 2 P A typical application for pilot-operated pressure reducing valves is for pressure control in systems requiring two or more different pressure settings where high pressure capability and/or extremely precise pressure control is required. Applications notes 5.

4 Pressure Reducing, Non-Relieving CP20-2 This is a direct-acting pressure-reducing (non-relieving) valve. psi bar 1, SUS ( cst) hyd. 100 F (8 C) P1040E 1, , Pressure L/min US gal/min Flow P104E Rated flow at 7 bar [100 psi] 210 bar [000 psi] 40 l/min [10 US gal/min] 0.25 kg [0.56 lb] SDC10-1 Regulated 2 Press Tank 46.4 [1.8] 7/8-14 UNF THD 55.9 [2.20] h 1.00 in t N. m [0-5 lbf. ft] Type A Type F 80.0 [.15] max. Type E Type K P1041E CP20-2-B-6S-A-C CP20-2 Seal kit B = Buna-N V = Viton = No Housing No Housing SEB = Al, /8 BSP SDC10--SE-B SE4B = Al, 1/2 BSP SDC10--SE-4B 6S = Al, #6 SAE CP10--6S 8S = Al, #8 SAE CP10--8S Adjustment option A = Internal E = External F = Tamper resistant K = Knob Crack pressure Code x 10 = psi Example: 100 = 1000 psi Pressure range bar [psi] A = 4-28 [50-400] Std. setting 17 [250] B = 5-55 [75-800] Std. setting 28 [400] C = 7-97 [ ] Std. setting 69 [1000] D = [ ] Std. setting 10 [1500] P1044E 5.4

5 Pressure Reducing, Non-Relieving PRC 06 This is a direct-acting pressure reducing (non-relieving) valve. Reduced pressure psi bar P1040E l/min US gal/min P10 57E Rated Flow 15 bar [4500 psi] 40 l/min [10 US gal/min] 0.14 kg [0.1 lb] NCS06/ I P Type of E = Internal screw EN = External screw M = Handwheel Setting range.5 = 1-10 bar [ psi] 1 = bar [145-6 psi] 2 = bar [ psi] PRC 06 - EN V V =Viton B = Buna-N Seal kit = No Housing No Housing SE/8 = AL, /8 BSP NCS06/-SE-/8 SE1/2 = AL, 1/2 BSP NCS06/-SE-1/2 SE6S = AL, #6 SAE NCS06/-SE-6S SE8S = AL, #8 SAE NCS06/-SE-8S To order this valve with a specific factory setting,contact your Sauer-Danfoss representative P10 784E PRC

6 Pressure Reducing, Relieving CP20-1 This is a direct-acting pressure reducing/ relieving valve. psi 2,01 1,740 bar SUS ( cst) hyd. 100 F (8 C) regulated press to tank (relieving) regulated press (reducing) P105E 1,450 1, Pressure L/min 40 US gal/min Flow P107E Rated flow at 7 bar [100 psi] 210 bar [000 psi] 40 l/min [10 US gal/min] 0.2 kg [0.51 lb] SDC10-1 Regulated 2 Press Tank 46.4 [1.8] 7/8-14 UNF THD 55.9 [2.20] h 1.00 in t N. m [0-5 lbf. ft] Type A Type F 80.0 [.15] max. Type E Type K P106E CP20-1-B-6S-A-C CP20-1 Seal kit B = Buna-N V = Viton = No Housing No Housing SEB = Al, /8 BSP SDC10--SE-B SE4B = Al, ½ BSP SDC10--SE-4B 6S = Al, #6 SAE CP10--6S 8S = Al, #8 SAE CP10--8S Adjustment option A = Internal E = External F = Tamper resistant K = Knob Pressure setting Code x 10psi (0.69 bar) Example: 100 = 1000 psi (70 bar) Pressure range bar [psi] A = 4-28 [50-400] Std. setting 17 [250] B = 5-55 [75-800] Std. setting 28 [400] C = 7-97 [ ] Std. setting 69 [1000] D = [ ] Std. setting 10 [1500] P109E 5.6

7 Pressure Reducing, Relieving PRR10-PVG This is a direct-acting pressure reducing/ relieving valve, designed for PVG actuators. s Max. pressure in port 2 Maximum flow Cartridge 210 bar [000 psi] 5 l/min [1. US gal/min] 0.2 kg [0.51 lb] SDC10- PVG Pressure Comparison from ports 2-1 at 1 l/min Reduced Pressure from ports 2-1 P108 65E P108 6E P108 62E E H B P108 64E PRR10-PVG 5.7

8 Pressure Reducing, Non-Relieving CP20-4 This is a pilot-operated pressurereducing (non-relieving) valve. psi bar 2, SUS ( cst) hyd. 100 F (8 C) P , ,450 1, Pressure L/min 10 US gal/min Flow P1050E Rated flow at 7 bar [100 psi] 50 bar [5000 psi] 40 l/min [10 US gal/min] 0.20 kg [0.4 lb] SDC10-1 Regulated 7/8-14 UNF THD 2 Press Tank 46.4 [1.8] 41.7 [1.64] h 1.00 in t 64-7 N. m [47-54 lbf. ft] Type A Type F 62.2 [2.45] max. Type E Type K P1049E CP20-4 Seal kit B = Buna-N V = Viton = No Housing No Housing SEB = Al, /8 BSP SDC10--SE-B SE4B = Al, 1/2 BSP SDC10--SE-4B 6S = Al, #6 SAE CP10--6S 8S = Al, #8 SAE CP10--8S Adjustment option A = Internal E = External F = Tamper resistant K = Knob CP20-4-B-6S-A-C Pressure setting Code x 10psi (0.69 bar) Example: 150 = 1500 psi (105 bar) Pressure range bar [psi] A = [ ] Standard 28 [400] B = [ ] Standard 69 [1000] C = [ ] Standard 10 [1500] D = [ ] Standard 10 [1500] P1052E 5.8

9 Pressure Reducing, Non-Relieving PPRC 06 This is a pilot-operated pressure reducing (non-relieving) valve. psi bar 154 SUS ( cst) hyd. 100 F (8 C) P Pressure L/min 0 US gal/min Flow P10 860E Rated flow at 7 bar [100 psi] 15 bar [4500 psi] 40 l/min [10 US gal/min] 0.14 kg [0.1 lb] NCS06/ P10 91E PPRC 06 - EN V Type of Seal kit E = Internal screw V =Viton EN = External screw Omit = Buna-N M = Handwheel Setting range 00 = No Housing No Housing SE/8 = AL, /8 BSP NCS06/-SE-/8 1 = bar [ psi] 2 = bar [ psi] = bar [ psi] SE8S SE1/2 SE6S = AL, #8 SAE = AL, 1/2 BSP = AL, #6 SAE NCS06/-SE-8S NCS06/-SE-1/2 NCS06/-SE-6S To order this valve with a specific factory setting,contact your Sauer-Danfoss representative P10 794E PPRC

10 Pressure Reducing, Relieving PRMP 064 This is a pilot-operated pressure reducing/relieving valve. psi bar SUS ( cst) hyd. 100 F (8 C) Dump 1 Reduced pressure P Pressure Rated Flow 15 bar [4500 psi] 40 l/min [10 US gal/min] 0.21 kg [0.46 lb] SDC L/min Flow US gal/min P10 786E P PRMP EN SE/8 -V PRMP 064 Adjustment E = Internal screw EN = External screw M = Handwheel V =Viton Omit = Buna-N Seal Kit Setting range 00 = No Housing No Housing SEB = Al, /8 BSP SDC10--SE-B 1 = bar [ psi] SE4B = Al, 1/2 BSP SDC10--SE-4B 2 = bar [ psi] 6S = Al, #6 SAE CP10--6S = bar [ psi] 8S = Al, #8 SAE CP10--8S To order this valve with a specific factory setting,contact your Sauer-Danfoss representative P10 787E 5.10

11 Pressure Reducing, Relieving CP21- This is a pilot-operated pressure reducing/relieving valve. psi bar regulated press regulated press to tank (relieving) (reducing) P Pressure L/min US gal/min Flow P E Rated flow at 7 bar [100 psi] 50 bar [5000 psi] 115 l/min [0 US gal/min] 0.27 kg [0.60 lb] CP12-S 1 1/16-12 UN THD 55.4 [2.18] Max. TYPE E shown Internal h6.5 [0.25] h 1.8 [1.25] t N m [50-55 lb ft] h 19.1 [0.75] P10 621E CP21--B-10S-A-A-050 Adjustment options A = Internal F =Tamper Resistant E = External K = Knob Seal kit B = Buna-N 1205 V = Viton 1206 Pressure setting Code x 10psi (0.69 bar) Pressure range Example: 050 = 500 psi (4 bar) A = bar [ psi] B = bar [ psi] C = bar [ psi] D = bar [ psi] 0 = No Housing No Housing 4B = Al, 1/2 BSP CP12-S-4B/2B 6B = Al, /4 BSP CP12-S-6B/2B 10S = Al, #10 SAE CP12-S-10S/4S 12S = Al, #12 SAE CP12-S-12S/4S P E CP

12 Pressure Reducing, Relieving PRR10-DRD This is a direct-acting pressure reducing/ relieving valve, with dampening port. 4 psi 1740 bar 120 cst[154 SUS] hyd.oil@8 C[100 F] Relieving Reducing 2 1 P108 69E l/min USgal/min Rated Flow at 7 bar [100 psi] 105 bar [1522 psi] 8 l/min [10 US gal/min] 0.29 kg [0.64 lb] SDC10-4 P108 68E 7/8-14 UNF 1.00 in Nm [0-5 lbf-ft] 1.00 in. Type A Adjustment Type E Type F Adjustment Type K 62.5 [2.45] 55.7 [2.18] 80 [.15] max. P108 67E PRR10-DRD PRR10-DRD-4-E-104-B-00 Pressure Range 1 = 4-27 bar [ psi] Standard Setting 21 bar [00 psi] 2 = 5-55 bar [ psi] Standard Setting 5 bar [500 psi] = 7-96 bar [ psi] Standard Setting 69 bar [1000 psi] 4 = bar [ psi] Standard Setting 104 bar [1500 psi] Adjustment Type A = Internal E = External F = Tamper Resistant K = Knob 00 = No Housing B = Al, /8 BSP 4B = Al, 1/2 BSP 6S = Al, #6 SAE 8S = Al, #8 SAE Seal Kit B = Buna-N V = Viton Pressure Setting 104 = 104 bar [1500 psi] XXX = Standard Setting Housing Part # No Housing CP10-4-B CP10-4-4B CP10-4-6S CP10-4-8S P108 70E 5.12