Series KJ. Miniature One-touch Fittings. Applicable Tube

Size: px
Start display at page:

Download "Series KJ. Miniature One-touch Fittings. Applicable Tube"

Transcription

1 Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing, the chuck and collet are released, thus preventing them from biting into the tube to an unnecessary degree. Unique shape allows easy tube release. acking Can be used for a wide range of pressure from a low vacuum up to a pressure of 15psi (1.0a). he use of a special profile ensures positive sealing and reduced resistance when the tube is being inserted. ube Body O-ring Stud ossible to insert tube in narrower space. he body and threaded portion can turn independently. Stud has electroless nickel plating. Standard preapplied thread sealant. (Except -2, ) Optimum piping in less space with 20% minituarization of the outside diameter Standard with thread sealant Can be used in applications where copper-free material is required. ossible to use in vacuum to 1.Ka ( orr) pplicable ube ube material ube O.D. Specifications rincipal Element aterial Nylon, Soft nylon, olyurethane Inch ø1/, ø5/2, ø1/ etric ø.2, o, ø NOE 1) Operating fluid ir, Water ax. operating pressure 15psi (1.0pa) ax. operating vacuum pressure 1.Ka ( orr) roof pressure 5psi(.0a) mbient and fluid temperature 2 to 10 F (-5 to 0 C), Water: 2 to 5 F (0 to 0 C) (no freezing) NSI/SEB ( thread), ortion Inch JIS B 02 2, Class 2B (-thread) Nut JIS B 02 2, Class 2B (-thread) ortion JIS B 020 (aper pipe thread) etric JIS B 0209, Class 2 (etric coarse thread) Nut JIS B 02, Class 2 (etric fine thread) Note1) pplicable for general industry water. Consult SC if using for other kinds of fluid. Surge pressure must be under the max. operating pressure. Body Stud Chuck, Guide Collet, Release button, Guide acking, O-ring SUS0, C0BD, B C0BD ( portion) SUS0 O NBR

2 odel exagon socket head male connector KJS. Internal hex allows thread connection by using an allen wrench, for confined space. Bulkhead union KJE. 20 Used to connect two tubes through a panel. Extended male elbow KJW. 15 he most appropriate use is when the elbow extends over a standard elbow for ease of connection/ disconnection of tubing. ale connector KJ. Use to pipe in the same direction from female threaded portion. ost general type. lug-in elbow KJ. 1 Use to change by 90 in a tube direction from One-touch fittings. Union Y KJU. 1 Use to branch connection of tubes in the same direction. Female union KJF. 1 Use to pipe from male threaded portion such as pressure gauge. Reducer elbow KJ. 15 Use to change by 90 in tube direction from One-touch fittings and to size down. Different union Y KJU. 1 Use to branch connection of tubes with size down in the same direction. Straight union KJ. 1 Use to connect tubes in the same direction. Branch tee KJ. 1 Use to branch line from female thread of both side 90 direction. lug-in Y KJU. 1 Use to branch tubing in the same direction from One-touch fittings. Different straight KJ. 1 Use to connect different size tubes. Union tee KJ. 1 Use to branch connection of tubes of both side 90 direction. Different plug in Y KJX. 19 Use to branch line of size down in the same direction from Onetouch fittings. ale elbow KJ. 1 Use to pipe in right angle to female threaded portion. ost general type. Different tee KJ. 1 Use to branch connection of tubes with size down in both side 90 direction. Branch Y KJU. 19 Use to branch line in the same direction from female thread. Union elbow KJ. 1 Use to connect tubes in right angle. ale run tee KJY. 1 Use to branch line in the same direction from female thread and in 90 direction. lug-in reducer KJR. 19 Use to change size of One-touch fittings. recautions Be sure to read before handling. Refer to ir Fittings & ubing recautions for other details. Interchangeability of and Series K Caution 1 Do not use the plug-in K Series with the KJ Series, it will not hold. 2 For combinations other than the plug-in Ks, they are interchangeable. Installation and Removal of One-touch ini Fittings Caution Installing ube 1 Cut the tube perpendicularly, using caution not to damage its O.D. surface. (Use tube cutter K-1, 2 or. Do not cut the tube with cutting pliers, nippers, scissors, etc.) 2 Grasp the tube, then slowly push it until it comes to a dead-end. hen pull it back gently to make sure that it does not pull out. Removing ube (Use one hand for removal.) 1 old the release button with the thumb and forefinger. 2 Grasp the tube with the remaining three fingers and palm. hen pull out the tube by the three fingers and palm while pushing in the release button with the thumb and the forefinger. o re-use the released tube, cut off the damaged portion of the tube.

3 ale connector: KJ Inch -2 pplicable tube () O.D KJ01-2 KJ01-S KJ01-S KJ0-2 KJ0-S KJ0-S KJ0-2 KJ0-S (ex.) KJ0-S Reference dimensions after thread installation in R() KJ etric pplicable (ex.) 0.5 KJ KJ R() KJ2-01S KJ KJ KJ0-01S KJ KJ0-01S Reference dimensions after R() thread installation exagon socket head male connector: KJS Inch -2 pplicable tube () O.D. (ex.) -2 KJS KJS KJS0-S KJS0-S KJS0-2 KJS0-S KJS0-S Reference dimensions after thread installation in KJS etric pplicable (ex.) 0.5 KJS KJS KJS KJS KJS0-01S KJS KJS0-01S 20 Reference dimensions after R() thread installation R()

4

5 ale elbow: KJ Inch -2 pplicable () -2 (ex.) KJ KJ01-S 9.5. KJ01-S. -2 KJ KJ0-S KJ0-S. -2 KJ KJ0-S KJ0-S. 1. Reference dimensions after thread installation. KJ etric pplicable R() KJ2- KJ2-5 KJ2-01S KJ0- KJ0-5 KJ0-01S KJ0-5 KJ0-01S (ex.) Reference dimensions after R() thread installation in Union elbow: KJ Inch pplicable KJ KJ KJ in KJ etric pplicable.2 KJ2-00 KJ0-00 KJ Nylon Urethane lug-in elbow: KJ Inch pplicable KJ01-99 KJ0-99 KJ0-99 Note) 1: max. diameter KJ etric pplicable.2 pplicable ød pplicable ød.2 Note) 1: max. diameter KJ2-99 KJ0-99 KJ in Nylon Urethane

6 Reducer elbow: KJ Inch pplicable pplicable ød KJ KJ KJ0-0 Note) 1: max. diameter in KJ etric pplicable pplicable fittings size ød KJ2-0.2 KJ2-0 KJ0-0 Note) 1: max. diameter Extended male elbow: KJW Inch -2 pplicable () -2 (ex.) KJW KJW01-S 9.5. KJW01-S. -2 KJW KJW0-S KJW0-S. -2 KJW KJW0-S KJW0-S. 1. Reference dimensions after thread installation in KJW etric pplicable R() R() 5 0. KJW2- KJW2-5 KJW2-01S KJW0- KJW0-5 KJW0-01S KJW0-5 KJW0-01S (ex.) R() 1. Reference dimensions after R() thread installation

7 Branch tee: KJ Inch -2 pplicable () -2 (ex.) KJ KJ01-S 9.5. KJ01-S. -2 KJ KJ0-S KJ0-S. -2 KJ KJ0-S KJ0-S. 1. Reference dimensions after thread installation in KJ etric pplicable R() R() (ex.) KJ2- KJ2-5 KJ2-01S KJ0- KJ0-5 KJ0-01S KJ0-5 KJ0-01S R() 1. Reference dimensions after R() thread installation Union tee: KJ Inch pplicable KJ KJ KJ in.. KJ etric pplicable.2 KJ2-00 KJ0-00 KJ Nylon.2.5 Urethane

8 Different tee: KJ Inch pplicable a b KJ KJ01-0 Note) 1, 2: max. diameter in KJ etric pplicable 1 a b.2 KJ KJ0-0. Note) 1, 2: max. diameter Nylon.5 Urethane ale run tee: KJY Inch -2 pplicable () -2 (ex.) KJY KJY01-S KJY01-S. -2 KJY KJY0-S KJY0-S. -2 KJY KJY0-S KJY0-S. 1.9 Reference dimensions after thread installation in KJY etric pplicable R() KJY2- KJY2-5 KJY2-01S KJY0- KJY0-5 KJY0-01S KJY0-5 KJY0-01S (ex.) R() R() 1.5 Reference dimensions after R() thread installation

9 Union Y : KJU Inch pplicable KJU KJU KJU in KJU etric pplicable.2 KJU2-00 KJU0-00 KJU Nylon.2.5 Urethane Different union Y : KJU Inch pplicable a b KJU KJU01-0 Note) 1, 2: max. diameter in KJU etric pplicable 1 2 a b.2 KJU KJU Note) 1, 2: max. diameter lug-in Y : KJU Inch pplicable pplicable ød KJU01-99 KJU0-99 KJU0-99 Note) 1: max. diameter in KJU etric pplicable.2 pplicable fittings size ød.2 Note) 1: max. diameter KJU2-99 KJU0-99 KJU

10 Different lug-in Y : KJX Inch pplicable pplicable ød KJX01-0 KJX0-0 Note) 1: max. diameter in. 2.. KJX etric pplicable pplicable fittings size ød.2 KJX2-0 KJX0-0 Note) 1: max. diameter Branch Y : KJU Inch -2 pplicable () KJU01-2 KJU01-S KJU01-S KJU0-2 KJU0-S KJU0-S KJU0-2 KJU0-S (ex.) KJU0-S Reference dimensions after thread installation. Note) 1: max. diameter KJU etric pplicable (ex.) KJU2-5 KJU0-5 KJU0-5 R() R() R() KJU2-01S KJU0-01S KJU0-01S. 9.. Reference dimensions after R() thread installation. Note) 1: max. diameter in lug-in reducer: KJR Inch pplicable pplicable ød KJR KJR KJR in KJR etric pplicable pplicable fittings size ød KJR2-0.2 KJR2-0 KJR

11 Bulkhead union: KJE Inch pplicable pplicable.2 KJE01-00 KJE0-00 KJE0-00 KJE etric KJE2-00 KJE0-00 KJE0-00 ounting in. () (ex.) (ex.) ounting

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Brass One-touch Fittings

Brass One-touch Fittings Brass One-touch Fittings Series KQB Fluid temperature: 5 to 0 C Grease-free material: FEP PF Nylon Soft nylon Polyurethane Polyolefin Electroless nickel plated (Brass parts): ade to Order (-X2) K D S Q

More information

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material Series K Clean one-touch fittings For blowing Recommended applicable olyolefin: Series T Tubing material Soft polyolefin: Series TS Tubing O.D. ø, ø, ø, ø, ø olyurethane Series TU, Nylon Series T, and

More information

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread

More information

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power

More information

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.

More information

Prestolok PLM Metal Push-to-Connect Fittings

Prestolok PLM Metal Push-to-Connect Fittings Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for

More information

Recommended Applicable Tubing. Specifications. Particulate generation grade

Recommended Applicable Tubing. Specifications. Particulate generation grade Clean One-touch Fittins For Blowin Series K Recoended Tubin olyolefin: Series T Tubin material Soft polyolefin: Series Tubin O.D. ø, ø, ø, ø, ø olyurethane tubin: Series TU, Nylon tubin: Series T, and

More information

Clean One-touch Fittings. For Driving Air Piping. KPQ/KPG Series. Applicable Tubing. Tubing material. Specifications

Clean One-touch Fittings. For Driving Air Piping. KPQ/KPG Series. Applicable Tubing. Tubing material. Specifications Clean One-touch Fittins os For Drivin ir Pipin KP/KPG Series ubin ubin material PF, Polyurethane ubin O.D. ø, ø, ø, ø, ø FEP, nylon and soft nylon, and not compatible with the clean series can also be

More information

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style Finger Valve SeriesVHK Large effective area: to mm 2 Small knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. Selection

More information

Push-In Fitting Type with Stop Valve

Push-In Fitting Type with Stop Valve http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage

More information

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

TOTALINE BRASS FITTINGS

TOTALINE BRASS FITTINGS LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3.

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Finger Valve eriesvhk Large effective area:.0 to 7.5 mm mall knob operating force: 0. to. kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. G GS PPA Compact and lightweight Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g)

More information

Stainless Steel 316 One-touch Fittings

Stainless Steel 316 One-touch Fittings CT.ES50-2 Stainless Steel 31 One-touch Fittings aterial etal parts: Stainless steel 31 Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP,

More information

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs

More information

Clean One-touch Fittings

Clean One-touch Fittings Clean One-touch Fittins Series K/K/KG K KK D S T Series K Series K Series KG Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C 900-30-ain Office: (0) -9200-Outside ocal rea: (00) 2-9200-www.stevenenineerin.com

More information

Pressure Gauge Series

Pressure Gauge Series Pressure Gauge Series Compact Design. Connection type In line Plug in Panel mount Threaded Model Designation (Example) GP C 15 U10 U 1 Type Pressure Gauge 1 Type 2 Series 4 Wrench size 3 Thread size/ Tube

More information

Prestolok PLS Stainless Steel Push-to-Connect Fittings

Prestolok PLS Stainless Steel Push-to-Connect Fittings Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance

More information

Compact Manometer. Pressure measurements can easily be taken any time, anywhere.

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. 1 Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. Compact and lightweight Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g) can also

More information

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4 eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always

More information

Push-In Fitting Type Pressure Gauge

Push-In Fitting Type Pressure Gauge http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller

More information

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual

More information

screw fittings - nickel plated brass series SC

screw fittings - nickel plated brass series SC screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical

More information

Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12

Applicable Tubing. Nylon, Soft nylon, Polyurethane, other soft plastic tubing ø4, ø6, ø8, ø10, ø12. Model TM-04 TM-06 TM-08 TM-10 TM-12 Multi-tube Holder TM Series Easy arrangement of tubing Easy tube insertion and firm fixation Possible to separate options depending on number of connection tubes Use of flame resistant resin (Equivalent

More information

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and

More information

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and

More information

(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure

(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure This type of tube fitting comes in eight lengths to suit your applications. The tube fitting, provided with a hexagonal hole, can be easily installed using an Allen wrench, even in a narrow or limited

More information

COMMON PRECAUTIONS Data Sheet - Be Sure To Read Before Handling Page 1 of 6

COMMON PRECAUTIONS Data Sheet - Be Sure To Read Before Handling Page 1 of 6 COMMON PRECAUTIONS Page 1 of 6 These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution",

More information

Polyurethane Tube. Straight Tube for General Pneumatic Piping. Excellent in Flexibility. Suitable for Compact Piping Requiring Small Bending Radius

Polyurethane Tube. Straight Tube for General Pneumatic Piping. Excellent in Flexibility. Suitable for Compact Piping Requiring Small Bending Radius http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Straight for General Pneumatic Piping Polyurethane 596 Standard Excellent in Flexibility Suitable for Compact Piping Requiring Small Bending Radius Variety

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Compression Fittings

Compression Fittings Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377

More information

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0. Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu

More information

F l o w c o n T R o l v a l v E S

F l o w c o n T R o l v a l v E S Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,

More information

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2 ISO G and ISO R Thread Options Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes

More information

Instruments AQDC. Aluminium Quick Disconnects. Light-weight, quick and reliable method a making a number of pneumatic connections.

Instruments AQDC. Aluminium Quick Disconnects. Light-weight, quick and reliable method a making a number of pneumatic connections. AQDC Aluminium Quick Disconnects Instruments Light-weight, quick and reliable method a making a number of pneumatic connections. 8, 16, 24 and 32 port stainless steel quick disconnects. Available with

More information

AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02

AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02 Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than

More information

Tube for General Pneumatic Piping

Tube for General Pneumatic Piping http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for General Pneumatic Piping 608 Standard Fine Pressure, Wear, and Cold Resistance. NB for Hot Water and Thermal Oil. Multi-core Coiling Twin Coiling

More information

Tube for Clean Environment Polyurethane Tube Clean-Room Package

Tube for Clean Environment Polyurethane Tube Clean-Room Package http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Clean Environment Polyurethane Clean-Room Package 642 Fine Flexibility. Suitable for Small Bending Radius in General Pneumatic Piping. Cleaned and

More information

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD The polyurethane tube, featuring excellent flexiblity, helps compact piping requiring small bending radius. The useful cut marks at 500mm interval are printed on the tube. Model UD0425 UD0640 UD0860 UD1075

More information

Die Temperature Control Fitting Series

Die Temperature Control Fitting Series http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Molding oupling Fitting 244 Push-In Fitting Type for. Thermal Oil, lean Water and Air for Fluid Medium. No

More information

4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED

4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED T UBE FITTINGS 4-63 P OLYURETHANE TU Flexible tubing For general industrial air and water applicatons 20m and 100m coils 8 colour option Available in metric size (TU) and inch size (TIUB) CONTACT SMC FOR

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Cautions : 1. The gauge orientation on the GPU and GPM types can be changed by using

Cautions : 1. The gauge orientation on the GPU and GPM types can be changed by using The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure

More information

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure

More information

Ball Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia.

Ball Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Shut-off Valve Ball Valve Series 564 ontrol Open/lose Air Supply. Ensure Effective Area for Variety of Tube Dia. Easily Adjustable

More information

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006 Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055

More information

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance

More information

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8 to 1 (6mm to 25mm) O.D. Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied

More information

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK

More information

Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings

Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial

More information

Cautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the

Cautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the The Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. The Silencer displays an excellent noise suppression effect. Three types are available for your selection. The element

More information

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel) // FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator

More information

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R) This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around

More information

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8

More information

Push-In Fitting Type Silencer

Push-In Fitting Type Silencer http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 540 Reduce Exhaust Noise from Exhaust Port. Excellent Silencing Effect. Selection from 3 types. Push-In Fitting

More information

Insert Ring. Protection Ring from Tube Deformation. Protect tubes from deformation. Ultra soft tube is connectable to Fitting.

Insert Ring. Protection Ring from Tube Deformation. Protect tubes from deformation. Ultra soft tube is connectable to Fitting. http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Protection Ring from Deformation Insert Ring 668 Protect tubes from deformation. Ultra soft tube is connectable to Fitting. Necessary for the connection

More information

Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω).

Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Anti-Static Environment Anti-Static 650 ESD Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). Classification of conductivity region UE

More information

Intru-lok Flareless Bite Type Fittings

Intru-lok Flareless Bite Type Fittings Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2

More information

Anti-spatter Tube. Spatter-Proof Tube for Pneumatic Piping. Polyamide type Tube Coated with Flame-Retardant Resin(Equivalent to V-0 )

Anti-spatter Tube. Spatter-Proof Tube for Pneumatic Piping. Polyamide type Tube Coated with Flame-Retardant Resin(Equivalent to V-0 ) http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Spatter-Proof for Pneumatic Piping Anti-spatter 646 Spark Resistance Polyamide type Coated with Flame-Retardant Resin(Equivalent to V-0 ) UL94 V-0 UL94

More information

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings CAT.E832- A Air Suction Filter In-line Type with One-touch Fittings Series ZFC An in-line type air suction filter that prevents trouble in vacuum equipment due to contaminants in the air IN/OUT straight

More information

Industrial Compression Style Fittings

Industrial Compression Style Fittings Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial

More information

Multi Core Tube for General Pneumatic Piping

Multi Core Tube for General Pneumatic Piping http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Multi Core for General Pneumatic Piping 616 Fine Flexibility. Simple Piping for Plural Actuators. Identification Line printed on Black Two-Core to Prevent

More information

INSERT FITTINGS INSERT FITTINGS

INSERT FITTINGS INSERT FITTINGS Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure

More information

Coiling Tube Series. Coiling Tube for General Pneumatic Piping. Coiling Tube for General Pneumatic Piping. Suitable for Air Gun or Air Driver.

Coiling Tube Series. Coiling Tube for General Pneumatic Piping. Coiling Tube for General Pneumatic Piping. Suitable for Air Gun or Air Driver. http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Coiling for General Pneumatic Piping Coiling Series 620 Coiling for General Pneumatic Piping. Suitable for Air Gun or Air Driver. Less Stress on Fittings

More information

Speed Controller Anti-spatter Series

Speed Controller Anti-spatter Series http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flame-Retardant Spatter-proof 422 Adopting Flame-Retardant Resin (V-). Protective Cover to Protect from Sparks.

More information

8.0. Tube and Fitting Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0

8.0. Tube and Fitting Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0 Product Catalogue Section J Version 8.0 Tube and Fitting Components Section J Tube & Fitting Components Index Barb Tee J:11 Blank Plug J:4 Branch Tee / Stud Tee Coupling J:10 Bulkend Coupling J:5 Bulkhead

More information

reduces flow setting time and setting errors!

reduces flow setting time and setting errors! Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! New RoHS Indicator window Size Size or larger Indicator window Number

More information

C 0G 00 N/US

C 0G 00 N/US G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow

More information

Speed Controller Constant Flow

Speed Controller Constant Flow http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Speed Control Valve for Fixed Flow Rate Speed Controller 440 Adjust Actuator Speed. Suitable for Mass Production

More information

Fittings, Materials and Tubing Guide. Instrumentation Products

Fittings, Materials and Tubing Guide. Instrumentation Products Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,

More information

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve. Pressure Valve Flow Valve Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

More information

Tube Cutter with Measuring tape built-in

Tube Cutter with Measuring tape built-in http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Cutter with Measuring tape built-in 658 Series Cutter TUBE VALVE CONTROLLER FITTING Model Code of Cutter (Example) Cutter Model Code of Cutter Blade (Example)

More information

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure

More information

Primary Terminals & Connectors

Primary Terminals & Connectors Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to

More information

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/ COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1

More information

EXH. Specifications. Descriptions. Min. working pressure MPa

EXH. Specifications. Descriptions. Min. working pressure MPa Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,

More information

Section 3- Repair and Calibration Procedures

Section 3- Repair and Calibration Procedures Section 3- Repair and Calibration Procedures 1. Refrigerant Removal Procedures 2. Scale/PC Board Recalibration Procedure 3. PC Board Configuration Procedure of AR400 4. Scale Tare Procedure 5. Gauge Calibration

More information

SIMPLAIR PIPING TOOL. JXT Company

SIMPLAIR PIPING TOOL. JXT Company SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

TANK MATE INCLUDES: TOOLS REQUIRED: CONRADER VALVES 3/4 WRENCH **TUBING CUTTERS TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING

TANK MATE INCLUDES: TOOLS REQUIRED: CONRADER VALVES 3/4 WRENCH **TUBING CUTTERS TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING CONRADER VALVES TANK MATE AUTOMATIC DRAIN VALVE INSTALLATION KIT INCLUDES: TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING WV-1 DRAIN VALVE TOOLS REQUIRED: 3/4 WRENCH **TUBING CUTTERS ** NEEDED TO CUT METAL

More information

Piloted Non-Return Valves

Piloted Non-Return Valves ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product

More information

INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN

INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l

More information

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can

More information

Push-in fittings CRQS, stainless steel

Push-in fittings CRQS, stainless steel Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and

More information

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424

More information

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

High Pressure Equipment Taper Seal Valves, Fittings and Tubing igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an

More information

Halsey Taylor Owners Manual

Halsey Taylor Owners Manual Halsey Taylor Owners Manual Refrigerated Marblyte Fountains with Back Panel HRFG - ER HRFG - SR HRFG - SER Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS

More information

>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:

>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB: >B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4

More information