Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement
|
|
- Sharlene Joseph
- 5 years ago
- Views:
Transcription
1 Hydraulic Motor/Pump Fixed Displacement
2 Specifications size F Displacement [cm 3 /rev] Operating pressure max intermittent 1) [bar] max continuous [bar] Motor operating speed [rpm] max intermittent 1) max continuous min continuous Max pump selfpriming speed 2) L or R function; max [rpm] Motor input flow max intermittent 1) [l/min] max continuous [l/min] circuit temp. 3), max [ C] min [ C] Theoretical torque at 100 bar [Nm] Mass moment of inertia (x10-3 ) [kg m 2 ] Weight [kg] size F Displacement [cm 3 /rev] Operating pressure max intermittent 1) [bar] max continuous [bar] Motor operating speed [rpm] max intermittent 1) max continuous min continuous Max pump selfpriming speed 2) L or R function; max [rpm] Motor input flow max intermittent 1) [l/min] max continuous [l/min] circuit temp. 3), max [ C] min [ C] Theoretical torque at 100 bar [Nm] Mass moment of inertia (x10-3 ) [kg m 2 ] Weight [kg] ) Intermittent: max 6 seconds in any one minute. 2) Selfpriming speed valid at sea level. 3) See also installation information, operating temperature. 6 Parker Hannifin
3 F11 F11-CETOP page 43 size M Motor x x x - - x H Motor, high pressure x - x x x x S Motor, high speed - - (x) - - (x) R Pump, clockwise rot'n (x) - (x) (x) (x) (x) L Pump, counter clockw. (x) - (x) (x) (x) (x) For other versions, contact Parker Hannifin Code B BSP threads x x x x x x U SAE, UN threads (x) - (x) - - (x) Code C CETOP x x x x x x W Saw motor - - (x) (x) (x) (x) (assigned for special versions) Code MVR Make-up valve clockwise rotation - - (x) (x) (x) (x) MVL Make-up valve counter clockwise rotation - - (x) (x) (x) (x) Code K Metric key x x x x x x K Metric key, 25 mm 3) - (x) (x) (x) - - D Spline, DIN 5480 (x) (x) (x) (x) (x) (x) S Spline, SAE (x) Code N NBR 1), low pressure (x) (x) (x) - - (x) V FPM 2), high pressure, high temperature x x x x x x S FPM 2), saw motor - (x) (x) - - (x) x: Available (x): al : Not available 3) Special version 349 Code sensor (x) (x) (x) 7 Parker Hannifin
4 F11 F11-ISO page 43 size M Motor x - - H Motor, high pressure x x x S Motor, high speed (x) - - R Pump, clockwise rot'n (x) (x) (x) L Pump, counter clockw. (x) (x) (x) Code F Metric threads x x x B BSP threads (x) (x) (x) Code I ISO x x x (assigned for special versions) Code MVR Make-up valve clockwise rotation (x) (x) (x) MVL Make-up valve counter clockwise rotation (x) (x) (x) Code K Metric key x x x D Spline, DIN 5480 (x) (x) (x) K Metric key, 25 mm 2) (x) (x) - Code V FPM 1), high pressure, high temperature x x x S FPM 1), saw motor (x) - - x: Available (x): al : Not available 1) FPM - Fluor rubber 2) Special version 349 Code sensor - (x) (x) 8 Parker Hannifin
5 F11 F11-SAE page 43 size M Motor x - - x H Motor, high pressure x x x x S Motor, high speed (x) - - (x) R Pump clockwise rot'n (x) (x) (x) (x) L Pump counter clockw. (x) (x) (x) (x) For other versions, contact Parker Hannifin (assigned for special versions) 19 Code MVR Make-up valve clockwise rotation (x) (x) (x) (x) MVL Make-up valve counter clockwise rotation (x) (x) (x) (x) 19 Code T SAE key - - x x S SAE spline (x) (x) (x) (x) K Metric key x x - - K Metric key, 25 mm 3) (x) (x) Code U SAE, UN threads x x x x B BSP threads (x) (x) - (x) 19 Code N NBR 1), low pressure (x) - - (x) V FPM 2), high pressure, high temperature x x x x S FPM 2), saw motor (x) - - (x) 19 Code S SAE x x x x x: Available (x): al : Not available 3) Special version Code sensor - (x) (x) (x) 9 Parker Hannifin
6 F12 F12-ISO page size (assigned for special versions) Code D DIN spline al (x) (x) (x) (x) (x) (x) (x) Z " " al (x) (x) (x) (x) (x) (x) (x) K Metric key Standard x x x x x x x P " " al (x) M Motor x x x x x x x Pump: L counter clockw. (x) (x) (x) (x) (x) (x) (x) R clockwise (x) (x) (x) (x) (x) (x) (x) Code L01 Integr. flushing valve (x) (x) (x) (x) (x) - 3) - 3) MVR MVL Make-up valve clockwise rotation (x) Make-up valve counter clockwise rotation (x) Code F SAE 6000 psi x x x x x x x Code sensor (x) (x) (x) (x) (x) (x) (x) Code I ISO x x x x x x x Code N NBR 1), low pressure (x) (x) (x) (x) (x) (x) (x) V FPM 2), high temperature, x x x x x x x high pressure x: Available (x): al : Not available 3) F and -125: Accessory valve block (page 45) 10 Parker Hannifin
7 F12 F12-Cartridge CETOP page size M Motor x x x x x x x x H Motor, high pressure (x) Pump: R Clockwice (x) L counter clockw (x) 150 Code F SAE 6000 psi x x x x x x x x (assigned for special versions) size Code C DIN spline Standard x x x x x x x - K Metric key al (x) - (x) (x) (x) - - x X Metric key 4) al - (x) X Spline 5) DIN x x - D Spline DIN (x) 150 Code L01 Integr. flushing valve (x) (x)(x) (x) (x) - 3) - 3) - MVR MVL Make-up valve clockwise rotation (x) Make-up valve counter clockwise rotation (x) Code sensor x (x) (x) (x) (x) x x Code C Cartridge x x x x x x x - C CETOP x x: Available (x): al : Not available 3) F and -125: Accessory valve block (page 45) 4) Special version 264 5) Special version Code N NBR 1), low pressure (x) (x) (x) (x) (x) (x) (x) (x) V FPM 2), high temperature, x x x x x x x x high pressure 11 Parker Hannifin
8 F12 F12-SAE page size size M Motor x x x x x x x x - H Motor, high pressure (x) - Q Motor x Pump: L counter clockw. (x) (x) (x) (x) (x) (x) (x) (x) (x) R clockwise (x) (x) (x) (x) (x) (x) (x) (x) (x) (assigned for special versions) Code S SAE spline al (x) (x) (x) (x) (x) (x) (x) (x) (x) U " " al (x) (x) T SAE key Standard x x x x x x x x - K Metric key (x) x F SAE spline (x) D Spline, DIN (x) Code L01 Integr. flushing valve (x) (x) (x) (x) (x) - 3) - 3) - - MVR Make-up valve clockwise rotation (x) MVL Make-up valve counter clockwise rotation (x) Code S SAE 6000 psi x x x x x x x - - U SAE, UN threads (x) (x) (x) (x) (x) (x) (x) - - F SAE 6000 psi 4) x x Code P Prepared for speed sensor (x) (x) (x) (x) (x) (x) (x) - - size Code S SAE 4 bolt x x x x x x x x x T SAE 2 bolt x x x Code N NBR 1), low pressure (x) (x) (x) (x) (x) (x) (x) (x) - V FPM 2), high temperature, x x x x x x x x x high pressure x: Available (x): al : Not available 3) F and -125: Accessory valve block (page 45) 4) Metric threads 12 Parker Hannifin
9 For a copy of the full catalogue and further support please contact Hydratorque (07) sales@hydratorque.com.au Fluid Power Solutions
Fixed Displacement Motor A4FM
Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering
More informationFixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
More informationVariable Displacement Double Pump A20VO. Series 1, for open circuits Axial piston - swashplate design, Back to back - design
Brueninghaus Hydromatik Series 1, for open circuits Axial piston - swashplate design, Back to back - design RE 93100/02.97 Sizes 60...260 Nominal Pressure up to 350 bar Peak Pressure up to 400 bar Preliminary
More informationDENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC
DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB
More informationFixed Displacement Pump KFA for commercial vehicles in open circuits
RE 91 501/05.98 Replaces: 11.96 Fixed Displacement Pump KFA for commercial vehicles in open circuits Sizes 23...107 Series 6 Nominal pressure 300 bar Peak pressure 350 bar KFA List of contents Features
More informationAuxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998
Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal
More informationVPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationFixed Displacement Motor A4FM
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91
More informationP2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES
52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
More informationIndustrial Hydraulic Pumps T6EDC. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial Hydraulic Pumps T6EDC Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationDual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications
Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents
More informationPRESSURE COMPENSATORS TECNORD
PRESSURE COMPENSATORS 2-way, Compensating / Reducing Valves GPM PSI LPM BAR MODEL CAVITY PAGE 8 3500 30 245 DF-CP2 7/8 14 UNF 60 16 3500 60 245 QC-CP2 Special 62 Typical Schematic Typical application for
More informationDisplacement. from 2 up to 6 sections balanced, unbalanced from 0.8 to 31 ccm FLOW DIVIDERS
Displacement from 2 up to 6 sections balanced, unbalanced from 0.8 to 31 ccm FLOW DIVIDERS DP Catalogue of flow dividers DP TABLE OF CONTENTS GENERAL DESCRIPTION........................................................................................................
More informationDisplacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
More informationVariable Displacement Pump A10VO
Brueninghaus Hydromatik Variable Displacement Pump A1VO Series 5, open circuits, SAE-Version Axialpiston, swash plate design size 28 6 Nominal pressure 2 bar Peak pressure 315 bar RE 9273/4.96 replaces
More informationOrbital Motors Type OMP X and OMR X
Technical Information Orbital Motors Type OMP X and OMR X powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev January 218 Major revision. 21 February 217 First edition. 11 2
More informationDENISON HYDRAULICS high performance hydraulic vane pumps single, double, triple T7 and T67 industrial application
Back to Content DENISON HYDRAULICS high performance hydraulic vane pumps single, double, triple T7 and T67 industrial application Publ. 1 - EN 079 - B 01 / 97 / 3000 / FB Replaces : 1 - EN 079 - A CONTENTS
More informationAPPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
More informationXpress L90LS Directional Control Valve. Catalog HY /UK December, 2001
Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables
More informationOrbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH Contents Revision View Date Page Changed Revision Mar 26 Small updates B Jun 27 all Major revision with new lit-number (minus
More informationPLD 03 T A CASAPPA S.p.A.
GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...
More informationDENISON HYDRAULICS T6 industrial application
DENISON HYDRAULICS T6 industrial application vane pumps - single, double, triple Publ. 1 - EN0700 - B 10 / 2000 / FB Replaces : 1 - EN0700 - A L13-10700 - 2 CONTENTS - T6 SERIES INDUSTRIAL APPLICATION
More informationOMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
More informationPVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
More informationMAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motor VMP powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Feb 214 New dimension drawings. Converted to Danfoss
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
More informationSauer Danfoss Series 90 Hydraulic Axial Piston Pump
Sauer Danfoss Series 90 Hydraulic Axial Piston Pump www.hydpump.com 90R030, 90R042, 90R055, 90R075, 90R100, 90R130, 90R180, 90R250 90L030, 90L042, 90L055, 90L075, 90L100, 90L130, 90L180, 90L250 Series
More informationGEAR PUMPS. Displacement from 5 to 39 ccm Pressure up to 280 bar Speed from 400 to 3000 RPM
Displacement from 5 to 39 ccm Pressure up to 280 bar Speed from 400 to 3000 PM GEA PUMPS TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationPilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size
More informationAxial piston-variable motor A10VM Plug-in version A10VE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service xial piston-variable motor 10VM Plug-in version 10VE R 91703/06.09 1/28 Replaces:11.07 Technical Data Sheet
More informationRCOe 1806/ PARKER CALZONI Radial Piston Motor Type MR, MRE
RCOe 86/9. PARKER CALZONI Radial Piston otor Type R, RE TABLE OF CONTENTS OTOR TYPE R RE CONTENTS PAG. TABLE OF CONTENTS GENERAL CHARACTERISTICS FUNCTIONAL DESCRIPTION TECHNICAL DATA FLUID SELECTION 6
More informationOMS, OMT and OMV Orbital Motors. Technical Information
OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV A Wide Range of Orbital Motors F300540.eps F300030.TIF A wide range of orbital motors Sauer-Danfoss is a world leader within production
More informationAxial piston pumps type PVC
www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise
More informationAxial piston pumps type PVC
www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low
More informationAxial piston pumps type PVPY-C (-R, -L) variable displacement, with mechanical controls obsolete components - availability on request
www.atos.com Table TA60obs/E Axial piston pumps type PVPY- (-R, -) variable displacement, with mechanical controls obsolete components - availability on request PVPY are variable displacement axial piston
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
More informationPressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
More informationdirectional control valve series cv691
directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages
More informationF05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK
CONTINENTAL HYDRAULICS F05MSV-N* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
More informationOrbital Motors Type VMP. Technical Information
Orbital Motors Type VMP Technical Information A Wide Range of Orbital Motors Revision View Date Page Changed Revision May 213 All First edition AA F31 245 A Wide Range of Orbital Motors Sauer-Danfoss is
More informationSDM to 8 sections monoblock valve D1WWDA02A
SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information
More informationAxial piston variable motor A10VM Plug-in version A10VE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service xial piston variable motor 10VM Plug-in version 10VE RE 91703/06.09 1/28 Replaces:09.07 Data sheet Series
More informationOrbital Motors OMSW with brake nose
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMSW with brake nose powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 214 Changed to Danfoss layout
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationHYDRAULIC MOTORS MV APPLICATION GENERAL
HYDRAULIC V APPLICAION» Conveyors» etal working machines» Agriculture machines» Road building machines» ining machinery» Food industries» Special vehicles» Plastic and rubber machinery etc. CONENS Specification
More informationControllers DR, DP, FR and DFR
Controllers DR, DP, FR and DFR RE 9060 Edition: 04.014 Replaces: 10.006 For variable pump A4VSO series 1 and 3 Open circuit Features Control of pressure and flow Remote controlled optional Pressure controller
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationHYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationSpin-On Filters SSF 24,25
Spin-On Filters SSF,5 Technical Specification Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections Flow rate Working pressure Operating temperature By-pass valve Clogging indicators
More information420 Mobile Piston Pump Design Code B
42 Mobile Piston Pump Design Code B ADU41 ADU49 ADU62 ADU8 Introduction 42 Series Mobile Piston Pump Eaton s 42 Series mobile pumps are open circuit, axial piston designs with displacements of 41cc, 49cc,
More informationDirectional Controls
Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP
More informationDISC VALVE HYDRAULIC MOTORS
DISC VALVE HYDRAULIC CONTENTS Page Hydraulic otors Series S... 4 Hydraulic otors Series T... 25 Hydraulic otors Series V... 39 otor Special Features... 51 otors with Speed Sensor... 52 Application Calculation...
More informationSafety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
More informationENGINEERING DATA. PVB Piston Pumps. w w w. F l u i D y n e F P. c o m Same Day Shipments of Units or Part Orders
ENGINEERING DT PV Piston Pumps Same Day Shipments of Units or Part Orders Interchangeable Parts Fully Tested w w w. F l u i D y n e F P. c o m Email:cs@FluiDyneFP.com Contents asic characteristics.........................................................................................
More informationSTAINLESS STEEL OVERFLOW VALVE TYPE 417
MAIN CHARACTERISTICS The 417 valve is intended for the discharge of fluids overflow when an upstream limitation of pressure is looked for, for example downstream to a pump. This valve also works in presence
More informationOrbital Motors OMS, OMT and OMV
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev February 216 Corrected Hardening specification
More informationE 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationAuxiliary Valve PRS6 Pressure Reducing Valve. Catalogue HY /UK June 2003
Auxiliary Valve Pressure Reducing Valve June 2003 General Subject to alteration without prior notice. The curves and diagrams in this catalogue are typical examples only. While the contents of the catalogue
More informationHydraulic Accumulators with Back-Up Nitrogen Bottles
Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the accumulator range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum
More information3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
More informationOver-center valves type LHT with oscillation damping, zero leakage
Over-center valves type LHT with oscillation damping, zero leakage Flow rate Q max = 250 lpm Operation pressure p max = 450 bar See also: o Over-center valve type LHK acc. to D 7100 o Over-center valve
More informationINVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:
direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum
More informationOMS, OMT and OMV Orbital Motors. Technical Information
, OMT and OMV Orbital Motors Technical Information , OMT and OMV A Wide Range of Orbital Motors Revision History Table of Revisions Date Page Changed Rev ED Dimensions changed EF A Wide Range of Orbital
More informationProp. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
More informationPVK OPEN LOOP PUMPS. Bulletin E
PVK OPEN LOOP PUMPS Bulletin 47025-E Table of Contents Performance Assurance page 3 Features and Benefits page 4-5 Specifications page 6 Pump Controls page 7 Table of Contents Curves Performance page 8
More informationG SERIES METRIC MACHINE SCREW ACTUATOR
G SERIES METRIC MACHINE SCREW ACTUATOR kn to 0kN Duff-Norton metric actuators are manufactured to the same high quality standards and include all the same features and benefits as the standard line of
More informationPressure Relief Valves. SPV, SPVF direct operated
Pressure Relief Valves SPV, SPVF direct operated Construction P Ø d 1 a T c 2 3 b 4 1 Housing 2 Sliding piston 3 Compression spring 4 Set screw Bleeding screw 6 Protective cap 6 Description The pressure
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
More informationE Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21
E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 Table of Contents Introduction......................................................................................................
More informationL6090 (LC04M-CBL) - L6095 (LC04M-CBD)
or 3 way pressure compensated flow regulators L69 (LC4M-CBL) - L695 (LC4M-CBD) RE 1833-4 Edition:.16 Replaces: 7.1 Size 4 Series Maximum operating pressure 31 bar (45 psi) Maximum flow (-way) 1 l/min (3.
More informationGEAR MOTORS HYDRAULIC MOTORS SECTION 4C
HYLI MOOS SEIO 4 E MOOS EES...210 EHIL IOMIO...210 MOOS OP 2 S...211 MOOS OP 2 SE, SE -O...212 MOOS OP 2 80, 50...213 MOOS OP 2 E52...2 MOOS OP 2 SPP.S...2 MOOS OP 2 OPIOL...216 MOOS OP 2 VILLE SHS...218
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min
More informationPressure relief valves
Pressure relief valves Type DV700 Features Direct operated valve High degree of pressure stability Safe operation Precise pressure adjustment Maximum pressure setting with lock nut Applications as cartridge
More information220 Mobile Piston Pump Catalog Design Code A AEC028
220 Mobile Piston Pump Catalog Design Code A AEC028 Introduction 220 Series Piston Pump Eaton s new 220 Series piston pump signifies a step change in the generation of hydraulic power. Utilizing the latest
More informationDiaphragm Accumulators
Diaphragm Accumulators HYDAC Diaphragm Accumulators Index Page 1. Description 3 Introduction 3 Construction 3 2. Applications 4 3. Technical Data 6 Operation 6 Technical Specifications 6 Temperature Effect
More informationBrueninghaus Hydromatik Rexroth A11VLO pump and A11VO pump
Brueninghaus Hydromatik Rexroth A11VLO pump and A11VO pump www.hydpump.com A11VLO40, A11VLO60, A11VLO75, A11VLO95, A11VLO130, A11VLO145, A11VLO190, A11VLO260. A11VO40, A11VO60, A11VO75, A11VO95, A11VO130,
More informationASB Accumulator Safety Blocks
ASB Accumulator Safety Blocks For working pressures up to 350 bar Catalogue HY07-1241/UK Note: In line with our policy of continuing product improvement, specifications in this catalogue are subject to
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1.1.1 Key to the circuit diagram Circuit diagram The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies
More informationProportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
More informationCartridge Valves Technical Information. Pressure Reducing, Quick Reference
Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-2 PRC 06 SDC10- NCS06/ Pressure Reducing, Non-Relieving, Direct Acting 40 l/min [10 US gal/min] 40 l/min
More informationLoad Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)
Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)
More informationPressure reducing valve, direct operated, type DR 5 DP Huade América 1
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, type DR 5 DP Size 5 up to 31.5MPa up to
More informationvacon nx ac drives hxm120 cooling unit, ss-piping commissioning and maintenance manual
vacon nx ac drives hxm120 cooling unit, ss-piping commissioning and maintenance manual WARNING HOT SURFACE! NOTE WARNING HOT SURFACE! NOTE 11571_uk WARNING ! NOTE! NOTE WARNING! NOTE Secondary
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators. It complies with the relevant safety standards
More informationvacon nx ac drives hxl040 cooling unit, ss-piping commissioning and maintenance manual
vacon nx ac drives hxl040 cooling unit, ss-piping commissioning and maintenance manual WARNING HOT SURFACE! NOTE WARNING HOT SURFACE! NOTE 11571_uk WARNING ! NOTE! NOTE WARNING! NOTE Additional
More informationExercise 2-3. Flow Rate and Velocity EXERCISE OBJECTIVE C C C
Exercise 2-3 EXERCISE OBJECTIVE C C C To describe the operation of a flow control valve; To establish the relationship between flow rate and velocity; To operate meter-in, meter-out, and bypass flow control
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 25, LEM 5 Pressure range: Suction volume flow: 33 to 113 mbar 4 to 6 m³/h CONSTRUCTION SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
More information420 Mobile Piston Pump Design Code B
42 Mobile Piston Pump Design Code B ADU41 ADU49 ADU62 ADU8 Introduction 42 Series Mobile Piston Pump Eaton s 42 Series mobile pumps are open circuit, axial piston designs with displacements of 41cc, 49cc,
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 8 l/min, up to 35 bar 3 6 4 6 4 8 33 5 66.x 66.x 99.x 3.x 3 3.x 64 3.x 396 3.x. TECHNICAL SPECIFICATIONS. FILTER HOUSING Construction The filter housings are designed
More informationFlow divider designs MTL
H Y D R A U L I K Flow divider designs MTL Edition November 1999/2005 Jahns-Regulatoren GmbH D 63069 Offenbach Sprendlinger Landstraße 150 Telephon (069) 83 10 86 D 63009 Offenbach Postbox 10 09 52 Telefax
More informationDouble Pilot Operated Cartridge Check Valve, Size 8
Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type
More informationPressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationSIHI LPH-X - Liquid Ring Compressors
- Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationAxial Piston Variable Pump A10V(S)O (US-Version)
Axial Piston Variable Pump A1V()O (U-Version) RA-A 9271/3.12 1/52 Replaces: 12.9 Data sheet eries 31 ize NG18 ((A)A1VO) ize NG28 to 14 (A1VO) Nominal pressure 4 psi (28 bar) Maximum pressure 51 psi (35
More informationPressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series)
Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, sandwich
More information