Multi Vision. Digital Transmitter 10/ EN
|
|
- Clifford Goodwin
- 5 years ago
- Views:
Transcription
1 Multi Vision Digital Transmitter 2010TD for Differential Pressure, Flow Rate and Level Spans: 50 Pa MPa (0.2 in. H 2 O psi) 2 kpa... 2 MPa abs. (8 in. H 2 O psia) 2010TDSW.TIF Measured media: gases, vapours, liquids Accuracy: 0.075% (option 0.05%) One sided overload up to rated pressure; max. 410 bar (6000psi) Large turn down ratio 100 : 1 Span and zero externally adjustable Transfer function configurable: linear square rooting freely programmable In conjunction with the LCD indicator, the transmitter can be configured with the external keys Communication protocol: PROFIBUS PA or Foundation Fieldbus or HART, mA Explosion protection: Intrinsic safety flameproof enclosure connection to Zone 0 Surge voltage resistant acc. to IEC Interchangeable electronics with self reconfiguration 1 Application The Multi Vision - series is a complete series of differential pressure, pressure and absolute pressure transmitters with an analogue or digital output signal for the process industry. The transmitter 2010TD measures differential pressure, flow rate or level; the transmitter 2010TA absolute pressure of aggressive and non-agressive media. The measuring ranges are: 2010TD: from 1 kpa to 10 MPa (5 in. H 2 O to 1500 psi) 2010TA: from 40 kpa to 2 MPa abs. (160 in. H 2 O to 300 psia) each for the nominal pressure ranges (safe working pressure SWP ) 160, 250 and 410 bar (2300, 3600 and 6000 psi).
2 Technical data 2 Principle of Operation and Construction The transmitter has a modular design and consists of the differential pressure sensor module with an integrated electronic matching unit and an amplifier with control unit. Lower range value Span Write protection Isolating diaphragm dp - sensor pabs - sensor Filling liquid Process connection Overload diaphragm Sensor body Output power supply TEST INSTRUMENT Micrprocessor based electronics Matching Transmitter 2010TD for differential pressure Output power supply TEST INSTRUMENT the fill fluid to the diaphragms of the silicon differential pressure sensor. A minimal deflection of the silicon diaphragm changes the output voltage of the pick-up system. This output voltage, proportional to the pressure, is converted by the matching unit and the amplifier into an electrical signal. 3 Input Measured value 2010TD: Differential pressure and Absolute pressure 2010TA: Absolute pressure Measuring range (upper and lower range values) Lower range value (continuously adjustable) 2010TD: - 100% to + 100% of the URL 2010TA: 0% and + 100% of the URL Upper range value (continuously adjustable) Up to 100% of the URL Spans dp-sensor: The adjusted span must not be lower than the minimum range (recommendation for square root function: at least 10% of the range). Measuring ranges Code min. max. SWP (bar) A 0.5 mbar 10 mbar 6 B 2 mbar 60 mbar C 4 mbar 400 mbar D 25 mbar 2.5 bar E 0.2 bar 20 bar G 1 bar 100 bar L 20 mbar abs. 400 mbar abs. 160 M 125 mbar abs. 2.5 bar abs. 160 N 1 bar abs. 20 bar abs. 160 Lower range value Span Write protection Isolating diaphragm dp - sensor Filling liquid Process connection Overload diaphragm Sensor body Transmitter 2010TA for absolute pressure The completely welded sensor module is a twin-chamber system with an integral overload diaphragm, an internal absolute pressure sensor and a silicon differential pressure sensor. The absolute pressure sensor, which is only exposed to the pressure at the high pressure side ( ), acts as a reference value to compensate for the static pressure. The differential pressure sensor is connected via a capillary tube to the negative side / the reference vacuum of the sensor module. The applied differential pressure (dp) / absolute pressure (pabs) is transferred via the separating diaphragm and Code min. max. SWP (psi) A 50 Pa (0.2 in.h 2 O) 1 kpa (5 in.h 2 O) 90 B 200 Pa (0.8 in.h 2 O) 6 kpa (25 in.h 2 O) C 400 Pa (1.6 in.h 2 O) 40 kpa (160 in.h 2 O) D 2.5 kpa (10 in.h 2 O) 250 kpa(1000 in.h 2 O) E 20 kpa (80 in.h 2 O) 2 MPa (300 psi) G 100 kpa (400 in.h 2 O) 10 MPa (1500 psi) L 2 kpa / 8 in.h 2 O 40 kpa / 160 in.h 2 O 2300 abs. abs. M 12.5 kpa / 50 in.h 2 O 250 kpa / 1000 in.h 2 O 2300 abs. abs. N 100 kpa / 400 in.h 2 O 2 MPa / 300 psi 2300 abs. abs. pabs-sensor: Measuring range Code 1 41 MPa abs. / 410 bar abs. / 6000 psia (0,6 MPa/6 bar abs./90 psi with 10 mbar range) 4 Output Output signal Transmitters with mA Analogue signal ma Output signal limits: Imin = 3.5 ma, Imax = 22.5 ma (configurable). Standard setting: Imin = 3.8 ma, Imax = 20.5 ma Page 2 of
3 Technical data Alarm current Min. alarm current: Max. alarm current: Standard setting: Load Transmitters with ma R configurable from 3.5 ma to 4 ma, standard setting: 3.6 ma configurable from 20 ma to 22.5 ma, standard setting: 21 ma max. alarm current Imax = ma (configurable) Us = supply voltage min. power supplyy: 10.5 VDC, 14 VDC with backlit LCD-indicator min. load for digital communications > 250 Ohm Field Bus units (communication code: P / F) Digital signal Transmission technique: acc. to IEC Power supply: 10.2 VDC V DC Base current: 14 ma Transmission rate: kbits/s PROFIBUS-PA: Version 3.0, Profile B for pressure transmitters; Ident No.: 04C2 HEX Foundation Fieldbus: FF-890 / 891 and FF-902 / 903 Characteristic Linear, square root, freely programmable with 20 reference points, x 3/2 and x 5/2 output function 5 Accuracy Reference conditions to DIN IEC Temperature: 20 C (68 F) Relative humidity: 65 % Atmospheric pressure: 1013mbar (1013 hpa, 14.7 psia) additional conditions: Separating diaphragm material Hastelloy C 1), filll fluid silicone oil and linear output All specifications are limits and relate to the output range or calibrated range. The influences marked relate to the measuring range (URL) and are to be multiplied by the turn down factor (ratio range (URL) / calibrated span). The turn down factor should be kept to a minimum. Conformity for 2010TD and 2010TA, dp-sensor: terminal based, including hysteresis and the dead band 2) linear square root 0.075% 0.15% Optional 2) (Order code: 5C9) linear Us 10, 5V I max square root 0.05% 0.1% in kohm for 2010TD, pabs-sensor: 0.8 bar, with pabs-sensor 6 bar: 12 mbar (321 in.h 2 O, with pabs-sensor 90 psi: 4,82 in.h 2 O) Hysteresis 2) linear square root 0.05% 0.1% Reproducibility 0.01 % Warm-up time < 15 s Rise time The time behaviour of this transmitter is composed of the rise time of the sensor and an adjustable integration time constant of the A/D converter. A high time constant results into a high resolution, e.g. required for a high span ratio, and at the same time into a higher rise time for the output signal. A low time constant means a lower resolution, but a shorter rise time and thus a faster reaction time of the transmitter. In case of the default integration time constant the values shown in the table below result. range 10mbar (4 in.h 2 O) 60mbar (25 in.h 2 O) 1 : 10 linear turn down factor > 1 : 10 up to 1 : 20 > 1 : 20 up to 1 : 40 additional adjustable time constant > 1: s square root freely programmable function ~ 2.0 s ~ 2.2 s ~ 2.6 s ~ 3.1 s ~ 2.6 s ~ 2.2 s ~ 0.8 s ~ 1.0 s ~ 1.4 s ~ 1.9 s ~ 1.4 s ~ 1.0 s 400mbar ~ 0.3 s ~ 0.5 s ~ 0.9 s ~ 1.4 s ~ 0.9 s ~ 0.5 s (160 in.h 2 O) The effect appearing at the output for non-linear output (e.g. square root function) depends on the function and is to be calculated accordingly. Long-term drift 0.05% per 12 months Effect of position Ranges on zero approx. 3.5 mbar (1.4 in.h 2 O) x sin ( = angular deviation in degrees from the nominal mounting position) Ambient temperature effect (dp-sensor) Temperature coefficient (-40 C C) 3)4) / (-40 F F) 3)4) on zero 0.04 % per 10 K (18 F) on span 0.04 % per 10 K (18 F) Ambient temperature effect (pabs-sensor (2010TD)) Thermal change (-40 C C) 3)4) / (-40 F F) 3)4) on zero 0.4 bar (160 in.h 2 O) 6 mbar with 6 bar pabs-sensor (2.4 in.h 2 O with 90 psi-sensor) Thermal change (-20 C C) 3)4) / (-4 F F) 3)4) on span 2 bar (803 in.h 2 O) 30 mbar with 6 bar pabs-sensor (12 in.h 2 O with 90 psi-sensor) Page 3 of 14
4 Technical data Thermal change (-40 C C) 3)4) / (-40 F F) 3)4) on span 3 bar (1204 in.h 2 O) 45 mbar with 6 bar pabs-sensor (18 in.h 2 O with 90 psi-sensor) Static pressure effect Effect of electro-magnetic interference 0.05% 1) 2) Measuring range on zero on span with Tantalum, Monel or Gold Plated Isolating Diaphragm, the factor 1.5 is to be taken into account with static pressure and ambient temperature effect with conformity additionally with turn-down factor > 10:1 ± ( mbar (4 in.h2o) up to 2 bar: 0.05% > 2 bar: 0,05% / bar up to 2 bar: 0.05% > 2 bar: 0.05% / bar 3) with range 10mbar / 100 bar: -20 C C (4 in.h 2 O / 1450 psi: (-4 F F) 4) with carbon fluoride filling liquid: -20 C C (-4 F F) 6 General conditions 60 mbar ( 24 in.h2o) up to 100 bar: 0.05% > 100 bar: 0.05% / 100 bar up to 100 bar: 0,05% > 100 bar: 0.05% / 100 bar measuring range )% adjusted span 100 bar (1450 psi) up to 100 bar: 0.1% > 100 bar: 0.1% / 100 bar up to 100 bar: 01% > 100 bar: 0.1% / 100 bar 6.1 Installation conditions Notes on installation Installation position: The transmitter can be directly flanged in any position. Preferably in such a position that the process flange axes are vertical (horizontal with barrel-type amplifier housing). Deviations from this can cause a shift in the zero, which can be corrected. The electronic housing can be rotated through 360 and can be fixed in any position. A stop prevents the housing beeing turned too far. 6.2 Ambient conditions Ambient temperature -40 C C (with O-ring Viton / PTFE: -20 C C) (-40 F F) (with O-ring Viton / PTFE: -4 F F), Observe approvals for explosion-protected transmitters. Storage temperature / transport temperature -50 C C, with LCD-indicator -40 C C (-58 F F, with LCD-indicator -40 F F) Humidity Relative humidity: 95% annual average Condensation, icing: admissible Protection class IP 67 acc. to EN ( NEMA Standard Type 6); with Han 8U plug: IP 65 ( NEMA Standard Type 4x) Protective varnish epoxy resin, greywhite, RAL 9002 Shock resistant Acceleration: 50g Duration: 11ms Vibration resistance 2g up to 1000 Hz, with amplifier housing made of stainless steel are valid restricted values (on request) Electromagnetic compatibility (EMC) to EN Definition: Class 3 Radio suppression (EN ): Limit class B Fulfills NAMUR recommendation. Process conditions Temperature limits -50 C C (-58 F F), at process connection to +400 C (752 F) in conjunction with remote seals. with gaskets: O-rings Viton / PTFE -20 C C (-4 F F) Pressure limits 2010TD: Static pressure limits: from 3.5 kpa abs. (14 in.h 2 O abs.) to the nominal pressure (SWP); proof pressure up to 1.5-times the nominal pressure simultaleously on both sides of the transmitter admissible. 2010TA: Static pressure limits: from full vacuum up to the nominal pressure (SWP); proof pressures up to 1.0-times the nominal pressure admissible. Overload limit One-sided overload up to the nominal pressure (SWP). Weight 3.5 kg Material Sensor body: 316 L stainless steel Isolating diaphragm(s): Hastelloy C * / 316 L stainless steel * (1.4435) / Tantalum / Monel /gold plated Process flange: 316 L stainless steel (1.4404) * / Hastelloy C * / Monel * / PVDF Nuts and bolts: stainless steel (A4) * Plugs: as process flange material Fill fluid: Silicone oil / carbon fluoride O-rings: the whole ranges: Viton(FPM) (green) Perbunan (NBR) (black) EPDM * (black) furthermore: ranges 60mbar ( 24 in.h 2 O) PTFE * (white) : max. permissible SWP 250bar ( 3600 psi) min. permissible operating temperature -20 C (-4 F) range 10mbar (4 in.h 2 O) : FEPcoated silicone (grey) Amplifier housing / aluminium with epoxy resin coat / Housing cover: stainless steel * in compliance with NACE MR0175 Class II Page 4 of
5 Technical data Process connection Flange with fixing thread 7/16-20 UNF and 1/4-18 NPT female thread on both sides or flange connection to DIN with thread M 10 for 6 bar (90 psi) and 160 bar (2300 psi) or M 12 for 250 bar (3600 psi) / 410 bar (6000 psi) and 1/4-18 NPT female thread on both sides. Electrical connections Two female threads 1/2-14 NPT or M 20 x 1.5 or one plug Han 8 U. (with Profibus PA: plug connector M 12 [without female mating plug]). Screw terminals for wire cross-sections up to 2.5 mm 2. Cable connection compartment / electrical connection Output signal / power supply Earthing / potential equalizing terminal Test sockets for 4 20 ma (not in function with fieldbus transmitters) Screw terminals for 2 0,5...2,5 mm -wires Electrical connection with plug barrel-type Cable entry (e.g. via M 20 x 1.5) DIN-type M01431E2.TIF 7 Display and operation interface Operation with keys Retrofit / optional key unit for external adjustment of zero and span and a write protect switch. There are no physical connections through the housing for the keys. In conjunction with an LCD indicator, the transmitter can be configured with the keys as follows: Zero and span with or without applied pressure, oblique sensor, damping, output current during faults, displayed value, pressure unit, linear or square rooting, temperature unit, as well as address with fieldbus devices. Operation via remote communications Communication protocol: PROFIBUS-PA or Foundation Fieldbus or HART Hardware: for HART : FSK modem for PC / notebook Handheld Terminal: STT 04 or HHT 275 or 691 HT LCD indicator 2-line, 6-character 19-segment alphanumeric display with additional bar chart display, optionally with back illumination. User-specific displays: Pressure value as a physical unit or percentage of the output current or output current in ma or instrument temperature in freely selectable units or free process variable address (only with Fieldbus-Transmitters) Diagnostic messages, alarms, measuring range infringements and changes in the configuration are also displayed. 8 Auxiliary energy Transmitters with mA (communication code: H ) Power supply: VDC ( VDC with backlit indicator), inverse polarity protection, explosion-protected transmitters, observe the approvals. Harmonic distortion: Maximal permissible voltage ripple of the power supply during the communication: 7 Vpp at 50Hz f 100Hz 1 Vpp at 100Hz < f 200Hz 0.2 Vpp at 200Hz < f 300Hz Field Bus units (communication code: P / F) Power supply: VDC, inverse polarity protection, explosion-protected transmitters, observe the approvals. Pollution degree 2 according to ANSI / ISA Overvoltage category II according to ANSI / ISA Certificates and Approvals Observe mounting conditions according to EN ; 1996ff! Transmitters of the type of protection Intrinsically safe EEx ia according to the directions 94 / 9 / EG (ATEX) Transmitter with ma output signal Marking (DIN EN ):II 1/2 G T 50 C EEx ia IIC T6 II 1/2 G T 95 C EEx ia IIC T4 EC-Type-Examination Certif.:ZELM 01 ATEX 0064 (1st + 2nd add.) Supply and signal circuit type of protection Intrinsic Safety EEx ib IIB/IIC resp. EEx ia IIB/IIC for connection to supply units with maximum values: II 1/2 G T 50 C EEx ia IIC T6 II 1/2 G T 95 C EEx ia IIC T4, for Temperature class T4: Ui = 30 V Ii = 200 ma Pi = 0,8 W for T4 with Ta = ( ) C / ( ) F Page 5 of 14
6 Technical data Pi = 1,0 W for T4 with Ta = ( ) C / ( ) F for Temperature class T5, T6: Pi = 0.7 W for T6 with Ta = ( ) C / ( ) F effective internal capacitance,ci 10 nf effective internal inductivity Li 0 Field Bus transmitters (PROFIBUS / Foundation Fieldbus) Marking (DIN EN ):II 1/2 G T 50 C EEx ia IIC T6 II 1/2 G T 95 C EEx ia IIC T4 EC-Type-Examination Certif.:ZELM 01 ATEX 0064 (1st + 2nd add. Supply and signal circuit type of protection Intrinsic Safety EEx ia IIB/IIC resp. EEx ib IIB/IIC for connection to FISCO supply units with rectangular or trapezoidal characteristics with maximum values: II 1/2 G T 50 C EEx ia resp. ib IIC T6 Ui = 17.5 V II 1/2 G T 95 C EEx ia resp. ib IIC T4li = 360 ma Pi = 2.52 W II 1/2 G T 50 C EEx ia resp. ib IIC T6Ui = 17.5 V II 1/2 G T 95 C EEx ia resp. ib IIC T4li = 380 ma Pi = 5.32 W resp. for connection to supply unit or barrier with linear characteristics maximum values: II 1/2G EEx ia respectively ib IIC T4...T6 Ui = 24 V li = 250 ma Pi = 1.2 W effective internal inductance Li 10 µh, effective internal capacitance Ci 0 Maximum permissible ambient temperatures depending on the temperature class : Transmitters of category 3 for the application in "Zone 2" according to the directions 94 / 9 / EG (ATEX) Marking (DIN EN ):II 3 GD 50 C EEx nl IIC T6 II 3 GD 95 C EEx nl IIC T4 EC-Type-Examination Certificate: ZELM 01 ATEX 3059 Operating conditions: Supply and signal circuit (terminals signal + / -): U 45 V I 22.5 ma Ambient temperature range: Temperature class T4 Ta= -40 C C (-40 F F) Temperature class T5, T6 Ta= -40 C C (-40 F F) Factory Mutual (FM) Intrinsically safe: Class I; Division 1; Groups A, B, C, D; Class I; Zone 0; Group IIC; AEx ia IIC Degree of protection: NEMA Type 4X (indoor or outdoor) Permissible ambient temperature range in dependence on temperature class U max = 30 V, C i = 10.5 nf, L i = 10 µh Ambienttemperaturclass max P i Temperature- I -40 C +85 C 0.8 W (-40 F +185 F) T4 200 ma -40 C +70 C 1 W (-40 F +158 F) -40 C +40 C T W T6 1) 25 ma (-40 F +104 F) 0.5 W 1) 1) not with 2010TC Temperature class Ambient temperature minimum Ambient temperature maximum Explosion-Proof: Degree of protection: Class I, Division 1, Groups A, B, C, D Class II / III, Division 1, Groups E, F, G NEMA Type 4X (Indoor or outdoor) T4 T5 T6-40 C -40 F -40 C -40 F -40 C -40 F +85 C +185 F +40 C +104 F +40 C +104 F Canadian Standard (CSA) (pending) Intrinsically safe, Explosion-Proof: Class I, Division 1, Groups A, B, C, D Class II, Division 1, Groups E, F, G Class III Degree of protection: NEMA Type 4X (Indoor or outdoor) Transmitters of the type of protection flameproof enclosure EEx d according to the directions 94 / 9 / EG (ATEX) Marking (DIN EN ): II 1/2 G EEx d IIC T6 EC-Type-Examination Certificate: PTB 00 ATEX 1018 Ambient temperature range: -40 C C (-40 F F) 2010TD as a part of Overflill protection on vessels for water polluting and flammable liquids. Flammable liquids: only when combined with Ex-Code 5A3 Total pressure up to 40 bar / (580 psi) Process temperature limits: 2010TD without remote seal -40 C C / (-40 F F) 2010TD with remote seal and capillary tube(s) 250 C / (482 F) 2010TD with directly mounted remote seal 180 C / (356 F) Approval: Z Page 6 of
7 Model ordering number Catalog No. Code EUR Delivery Transmitter 2010TD for differential pressure measurement V ,- 4 wks Transmitter 2010TA for absolute pressure measurement V ,- 4 wks Communication HART, ma H - Foundation Fieldbus F +161,- - PROFIBUS-PA P +161,- - Measuring Ranges dp / pabs 10 mbar (1kPa / 5 inch H 2 O) (max. SWP 6 bar / 90 psi) A +237,- + 2 wks 60 mbar (6kPa / 25 inch H 2 O) adj. to... B mbar (40kPa / 160 inch H 2 O) adj. to... C bar (250kPa / 1000 inch H 2 O) adj. to... D bar (2MPa / 300 psi) adj. to... E bar (10MPa / 1500 psi) adj. to... G +102,- + 2 wks 400 mbar abs. only adj. to... L wks 2.5 bar abs. sensing diaphragm adj. to... M wks 20 bar abs. made of Hastelloy C adj. to... N wks Measuring Ranges pabs-sensor (second value, only with 2010TD) 410 bar / 6000 psi (6 bar / 90 psi with range 10 mbar / 5 in.h 2 O [Code A]) without second value (only with 2010TA) Measuring sensor Diaphragm Fill fluid Hastelloy C Silicone oil A - - Carbon fluoride B +46,- + 2 wks 316 L stainless steel (1.4435) Silicone oil E +64,- + 3 wks (not 2010TA) Tantalum Carbon fluoride (only with PTFE O-ring) K +423,- on req. (not with range 10 mbar) Monel Silicone oil (only with PTFE O-ring) N +130,- + 4 wks (not with range 10 mbar) Gold plated Silicone oil (only with PTFE O-ring) T on req. on req. (not with range 10 mbar) Process flange, HP and LP sides identical Material Nominal Pressure (SWP) 316 L stainless steel (1.4404) 160 bar / 2300 psi bar / 3600 psi 2 +76, bar / 6000 psi ,- - 6 bar / 90 psi (range 10 mbar / 5 in.h 2 O) E - - Hastelloy C 160 bar / 2300 psi 7 on req. + 6 wks 250 bar / 3600 psi 8 on req. + 6 wks 410 bar / 6000 psi 9 on req. + 6 wks 6 bar / 90 psi (range 10 mbar / 5 in.h 2 O) F on req. + 6 wks Monel 160 bar / 2300 psi A on req. + 8 wks 250 bar / 3600 psi B on req. + 8 wks 410 bar / 6000 psi C on req. + 8 wks 6 bar / 90 psi (range 10 mbar / 5 in.h 2 O) G on req. + 8 wks PVDF 10 bar / 150 psi D on req. on req. 6 bar / 90 psi (range 10 mbar / 5 in.h 2 O) H on req. on req. Process Connection Position of the thread holes for the drain / vent valves (scope of delivery: plugs only, no vent valves) 7/16 UNF and 1/4-18 NPT upright A - - female thread side (only in conjunction with Code 395 / 396) B +16,- - acc. to DIN upright C - - (M10/M12 and 1/4-18 NPT) side (only in conjunction with Code 395 / 396) D +16,- - attached remote seal 1) E - - Continued on next page Page 7 of 14
8 Model ordering number Continued from preceding page Catalog No. Code EUR Delivery Bolts Flange O-rings Stainless Steel Viton (Temperature Limits: -20 C +120 C) ,- - Perbunan PTFE (PN <= 250 bar, T operating => -20 C) ,- - EPDM (for NACE application) ,- - for vacuum proof remote seals (only in conjunction with Code 739) B - - Amplifier Housing Type Material Electrical connection Barrel - Type, Aluminium 1/2 NPT A 3) + 15,- +2 wks ID Plate, Stainless Steel Barrel - Type, Aluminium 1/2 NPT D - - ID Plate Plastic One M20 x 1.5 cable gland E - - Plug Han 8U (with Profibus PA: plug M12 2) ) F + 53,- - Barrel - Type, Stainless Steel 1/2 NPT J + 349,- - ID Plate Plastic One M20 x 1.5 cable gland K + 349,- - DIN - Type, Aluminium 1/2 NPT L - - ID Plate Plastic One M20 x 1.5 cable gland M - - Plug Han 8U (with Profibus PA: plug M12 2) ) N + 53,- - Function square rooting Conformity < 0.05 % 5C ,- - Amplifier housing accessories Local keys (not with amplifier housing Code J, K) 5C2 + 13,- - LCD indicator 5C ,- - LCD indicator, back lit (only with communication HART, 4 20 ma) 5C ,- - Transient Suppression (not with Ex-Protection "Intrinsically Safe") 5C ,- +2 wks Explosion Protection (acc. to ATEX) II 1/2 G EEx d IIC T6 (not with housing Code F or N; without cable gland) 5A1 + 33,- - FM Explosion Proof (only with amplifier housing code A) 5A2 + 33,- +2 wks II 1/2 GD EEx ia IIC T6 5A3 + 16,- - FM Intrinsically Safe 5A4 + 16,- - II 3 GD EEx nl IIC T6 (supply without cable gland) 5AC + 16,- - Oxygen measurement (O 2 ) Free from oil and grease for measuring oxygen (P max = 60 bar; T max = 60 C) ,- +2 wks (only when combined with filling liquid Carbon fluoride [measuring sensor Code B], material process flange [Code 1 or 7] and flange O-rings Viton [Code 6] Overfill protection for water polluting liquids; (flammable liquids: only with Ex-Code 5A3) ,- - for 2010TD and 2010TD with close coupled or remotely coupled chemical seal(s) via capillary tube (only with range Code B, C and D) Mounting Bracket Wall mounting, stainless steel ,- - Wall and pipe mounting, stainless steel ,- - Vent / drain plugs Stainless Steel (2 pieces) ,- - Hastelloy (2 pieces) 396 on req. +6 wks Flange Adapter (material: oval flange / bolts) Oval flange 1/2-14 NPT(stainless steel / stainless steel) ,- - Tag-No. on Type plate (max. 30 characters) Stainless Steel Tag Plate (max. 30 characters) 5C8 + 14,- - Operating manual (1 pcs. free of charge) German each Z2D + 11,- - English each Z2E + 11,- - 1) 2010TA: 1 remote seal, 2010TD: 2 remote seals, but with 1 remote seal please indicate the Process connection Code A, B, C or D 2) without mating plug (female), see Data Sheet 10/ ) for Explosion Proof acc. to FM Page 8 of
9 Model ordering number Continued from preceding page Catalog No. Code EUR Delivery Certificates Factory Certificate EN of the instrument design ,- - Acceptance Test Certificate B EN of the conformity, hysteresis ,- - Acceptance Test Certificate B EN of the pressure testing ,- - Factory Certificate EN of process wetted parts ,- - Acceptance Test Certificate B EN of the Cleanliness Stage acc. to DIN ,- - Accept. Test Certificate B EN Helium leakage test of the sensor module (only with Code 150) ,- - Acceptance Test Certificate B EN of the pressure-bearing and process wetted parts with ,- +2 wks analysis certificates as material verification (minor parts with Factory Certificate acc. to "EN ") Factory Certificate EN of the pressure-bearing and process wetted parts ,- - Measuring mechanism leak-tested with helium ,- - Scope of Delivery Supplied against special order: 1 Instructions Remote Seal, Power supply e.g. TZN 128 (Data Sheet EN) 1 Instrument socket with plug connector Spare Parts Transmitter 2010TD / 2010TA 2 Plugs Page 9 of 14
10 Model ordering number Customer-specific configuration (Please add to the order) Output signal (please pick) ma linear PROFIBUS-PA square root: Zero suppression... % lin / Sq.Rt. transition point... % Foundation Fieldbus characteristic, programmable (please complete Table): Characteristic Input (%) Output (%) Electrical damping Output current... s ( s) Max. output current... ma ( ma) Min. output current... ma ( ma) Max. alarm current... ma ( ma) Min alarm current... ma ( ma) Tag-No. Digital display... Displayed value... Page 10 of
11 Dimensional drawings 10 Construction Transmitter with barrel-type amplifier housing Errors and omissions excepted. Dimensions are in inches (mm). ~4.49(114) +0.91(23mm) with LCD-Indicator Connections this side (9) ~2.28(58) ( 2 6 ) (20) Clearance for Cover removal ~ (1 8 6 ) (1 0 8 ) (54) 3.78(96) (4 1.3 ) ( 3 0 ) 3.54(90) ( 6 1 ) M E 4. T I F Ø (8 3 ) ~ (1 1 7 ) 1 1/4-18 NPT female thread for process connection or sealing plug. 2 Thread for fixing screws: 7/16-20 UNF, 16mm deep. Minimum screw-in length is 12mm, however 15mm with PN410. With a flange according to DIN : M 10 with PN 6 and PN 160 bar, M 12 with PN 250 and PN 410 bar, minimum screw-in length according to DIN Electrical connections: M20 x 1.5 cable gland or 1/2-14 NPT female threads on both sides or one plug Han 8U. 4 Type plate. 5 Measuring mechanism plate. 6 Threaded side-mounted entry 1/4-18 NPT for drain / vent valves. 7 Captive screw for key unit cover. 8 Housing rotation stop screw. 9 Blind plug. 10 Enclosure cover. 11 Tie-on plate, e.g. for tag number (optional). 12 Plate, also with key legend. 13 Fastener for seal wire (cover and key-board cover) Page 11 of 14
12 Dimensional drawings Transmitter with DIN-type amplifier housing Errors and omissions excepted. Dimensions are in inches (mm) /4-18 NPT female thread for process connection or sealing plug. 2 Thread for fixing screws: 7/16-20 UNF, 16mm deep. Minimum screw-in length is 12mm, however 15mm with PN410. With a flange according to DIN : M 10 with PN 6 and PN 160 bar, M 12 with PN 250 and PN 410 bar, minimum screw-in length according to DIN Electrical connections: M20 x 1.5 cable gland sides or 1/2-14 NPT female threads on both sides or one plug Han 8U. 4 Type plate. 5 Measuring mechanism plate. 6 Captive screw for key unit cover 7 Housing rotation stop screw. 8 Blind plug 9 Enclosure cover. 10 Tie-on plate, e.g. for tag number (optional). 11 Plate, also with key legend. 12 Fastener for seal wire (cover and key-board cover) Page 12 of
13 Dimensional drawings Errors and omissions excepted. Dimensions are in mm. Possible mounting with bracket (optional,code 143/144) for barrel-type electronic housing 1 2 M01517x1.TIF Vertical pipe mounting Horizontal pipe mounting Vertical pipe mounting and transmitter above the mounting bracket Horizontal pipe mounting and transmitter above mounting bracket M01520x1.TIF M01521x1.TIF M01518x1.TIF M01519x1.TIF 1 U-bolts for pipe mounting. Pipe: 2 (internal-ø). Permissible pipe-ø: mm. Rearrange the brackets for horizontal pipe mounting. 2 Brackets, hole-ø: 11mm Page 13 of 14
14 ABB Automation Products GmbH Schillerstraße 72 D Minden Tel. (0571) Fax (0571) ABB Automation Inc. 125 East County Line Road Warminster PA USA Tel. (215) /6320/6777 Facsmile (215) Technical revision reserved Printed in the Fed. Rep. of Germany 10 / EN
2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor
INDUSTRIAL INSTRUMENTS AND CONTROLS SPECIALIST Kent-Taylor 2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters Features Include Base accuracy : ±0.075% Span limits
More informationTorque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationDifferential Pressure Transmiter
Differential Pressure Transmiter Description The is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor;
More information2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationSiemens AG psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) 3626 psi (250 bar) 8700 psi (600 bar) psi (800 bar)
Technical specifications SITRANS P, DS III series Input Measured variable Spans (infinitely adjustable) or nominal measuring range and max. permissible test pressure HART Gauge pressure Span (min.... max.)
More informationPressure transmitter PASCAL Ci4
Pressure transmitter PASCAL Ci4 for general application,type Series CI4100 Features Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids High-resolution
More information1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure
Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3
More informationSITRANS. Pressure transmitter SITRANS P, Z series for gauge and absolute pressure. Introduction. Safety instructions 2.
Introduction 1 Safety instructions 2 SITRANS Pressure transmitter SITRANS P, Z series for gauge and absolute pressure 7MF1564 Description 3 Assembly and connection 4 Technical data 5 Dimensional drawings
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More information2600T Series Pressure Transmitter
Data Sheet 2600T Series Pressure Transmitter Model 261GC/GG/GJ/GM/GN Gauge Model 261AC/AG/AJ/AM/AN Absolute with direct mount seal Base accuracy: ±0.15 % Span limits 0.3 to 60000kPa; 1.2inH 2 O to 8700psi
More informationType N-10, N-11 Hazardous Area Non-incendive Transmitters
Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial
More informationDifferential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationPressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
More informationTechnical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications
Technical Datasheet D Series SMART Pressure Transmitter Model: DPC-2000 Key Features ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe SIL 2 certificate Compliant to NAMUR
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition
Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.
More informationModel NDA Differential pressure transmitter. Deltapi N Series A complete range of pneumatic pressure transmitters
Data Sheet DS/NDA-EN Rev. H Model NDA Differential pressure transmitter Deltapi N Series A complete range of pneumatic pressure transmitters Introduction The blind type differential pressure transmitter
More informationModel 261GR for gauge pressure Model 261AR for absolute pressure
Change from one to two columns Data Sheet SS/261GR/AR-EN Rev. 07 Model 261GR for gauge pressure Model 261AR for absolute pressure 2600T series pressu re transmitters Engineered solutions for all applications
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
More informationPressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationGas density monitor With integrated transmitter Model GDM-100-TI
SF 6 gas solutions Gas density monitor With integrated transmitter Model GDM-100-TI grid Products WIKA data sheet SP 60.05 for further approvals see page 5 Applications Gas density monitoring of closed
More informationx act i Precision- Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor
Precision- Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationLevel transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationDM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationL (up to 25 m) Electronic part. working temp.: Ñ IP 66 / IP67. Mounting bracket ÐÑ. Sensor type. working temp.:
Smart level probe type APC-2000ALW/L Programmable zero shift, range and damping ratio 4...20 ma output signal + HART protocol Accuracy 0,16% Local display Intrinsic safety certificate (ATEX, IECEx) II
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationHigh-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
More informationETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationModel 266MST Differential Model 266RST Absolute. 2600T Series Pressure Transmitters Engineered solutions for all applications
Data Sheet DS/266MST/RST-EN Model 266MST Differential Model 266RST Absolute 2600T Series Pressure Transmitters Engineered solutions for all applications Base accuracy 0.04 % of calibrated span, (Option
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationCompact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
More informationSeries INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
More information780S Ultra High Purity Series
Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no seperate temperature or pressure inputs required Field adjustment of critical flow meter settings via on-board
More informationModel 266MST Differential Model 266RST Absolute. 2600T Series Pressure Transmitters. Engineered solutions for all applications
Data Sheet DS/266MST/RST-EN Rev. B Model 266MST Differential Model 266RST Absolute 2600T Series Pressure Transmitters Engineered solutions for all applications Base accuracy 0.04 % of calibrated span,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000123 This is to certify: That the Pressure Transmitter with type designation(s) SITRANS P series DS III, P310, P410 Issued to Siemens AG - Process Industries
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationS265 Remote seals with capillary tube. 2600T Series Pressure Transmitters. Engineered solutions for all applications
Contents Data Sheet S265 2600T Series Pressure Transmitters Engineered solutions for all applications Wide range of remote seal types Allows optimum design for each application without compromising performance
More information9700 Transmitter Submersible hydrostatic level transmitter
Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous
More informationATM.1ST/Ex - High Precision Transmitter
Pressure Transmitter - ATEX / IECEx certified ATM.1ST/Ex - High Precision Transmitter CUSTOMER BENEFITS Certificate: ATEX, IECEx & EAC High measurement accuracy is ensured by sophisticated digital temperature
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationElectropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition
Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationATM.ECO/IS - Analog Transmitter with Temperature compensation
Pressure Transmitter - FM / FM-C certified ATM.ECO/IS - Analog Transmitter with Temperature compensation CUSTOMER BENEFITS Certificate: FM, FM-C & IECEx & ATEX Entry level series into precision pressure
More informationLiquid level instruments BM 24 /BM 51
KROHNE 09/2001 7.02362.21.00 GR/PRINTO Liquid level instruments / Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationC-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
More informationOSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
More informationPressure Switches Application Guideline
Pressure Switches Application Guideline Product Overview The Fema Pressure Switch product portfolio provides devices suitable for many applications. The portfolio contains Special functions and equipment
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 10 mm
Dimensions M30x1,5 5 40 37 0102 Model Number 36 LED Features Comfort series 10 mm embeddable Connection BN BU Accessories BF 30 Mounting flange, 30 mm L+ L- Technical Data specifications Switching element
More informationDifferential Pressure Transmitter deltabar S PMD 25 K for use in Nuclear Power Plants
Technical Information TI 330P/00/en Differential Pressure Transmitter deltabar S PMD 25 K for use in Nuclear Power Plants Deltabar S with silicon sensor overload resistant with function monitoring Application
More informationUNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
More informationPrecision pressure sensor Basic version Model CPT6020
Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications
More informationABB measurement & analytics data sheet. 266MST and 266RST Differential and absolute pressure transmitters
ABB measurement & analytics data sheet 266MST and 266RST Differential and absolute pressure transmitters 2 266MST an d 266RST Di ffer en ti al And absolu te pre ssu re tr ansmit te rs DS/266MST/RST-EN
More informationPressure Measurement Transmitters for applications with advanced requirements (Advanced)
Siemens AG 207 Technical specifications SITRANS P DS III series for absolute pressure (from the gauge pressure series) Input Measured variable Absolute pressure Span (fully adjustable) or measuring range,
More informationVortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres
Vortex flow sensor VA Di Ex-d with integrated, configurable transducer UVA in a flameproof enclosure for applications in explosive atmospheres Drawing 1 VA Di ZG1 Ex-d Measured variables actual flow rate
More informationFeatures. Description
Features Fast response flow meter ideal for inert gas and liquid mass flow measurement applications Smart electronics permit field adjustment of critical flow meter settings Field validation of flow meter
More informationRTX 1000H Series. Versatile Transmitters for a World of Pressure. GE Measurement & Control. Features
GE Measurement & Control RTX 1000H Series Versatile Transmitters for a World of Pressure GE Measurement & Control is renowned for the design and manufacture of compact and rugged high performance pressure
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 2 mm
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-12 Quick mounting bracket with dead stop BF 12 Mounting flange, 12 mm Technical Data specifications Switching
More informationSeries INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
More informationDifferenz-Drucktransmitter Differential pressure transmitter Transmetteur de pression différentielle bar
692 Differenz-Drucktransmitter Differential pressure transmitter Transmetteur de pression différentielle 0 0.1 25 bar E Technical overview The differential pressure transmitter of type series 692 with
More informationLMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
More informationsitrans p Operating Instructions (de/en) Edition 03/2004
(de/en) Edition 03/2004 sitrans p Messumformer für Food, Pharma und Biotechnik Transmitters for food, pharmaceuticals and biotechnologgy 7FM8010 Contents Information for the operator...27 Important security
More informationTechnical Datasheet. Pressure Transmitter: Analogue Series 387. Performance characteristics. Product applications. How can we help you?
Technical Datasheet Pressure Transmitter: Analogue Series 387 387 ISSUE G High Accuracy ± 0.15%. Ranges from 1 bar to 1000 bar. 4 : 1 turndown. 4-20mA analogue with digital communications. 316 stainless
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 26.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationBourdon tube pressure gauge for diaphragm seals
Bourdon tube pressure gauge for diaphragm seals and switch function, Type series BR42.. Features Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1 3 bar to -1 15 bar,
More informationMiniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 800
KROHNE 1/22 7.236.22. GR Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 8 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationJUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
More informationVortex Flow Sensor VA Di Ex-d for flow measurement in gases; with integrated, configurable transducer UVA in Ex-d housing
Vortex Flow Sensor VA Di Ex-d Vortex Flow Sensor VA Di Ex-d for flow measurement in gases; with integrated, configurable transducer UVA in Ex-d housing Drawing 1 Measurable variables actual flow rate actual
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationUltra High Purity Model 780S
Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no separate temperature or pressure inputs required Built-in flow conditioner which eliminates velocity-profile
More informationTechnical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationMonitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
More informationTechnical Data. Dimensions
00 Model Number Features Comfort series 30 mm non-flush Accessories MHW 0 Modular mounting bracket V-G Female connector, M, 4-pin, field attachable V-W-N-M-PUR Female cordset, M, -pin, NAMUR, PUR cable
More informationHydrostatic. Continuous level measurement. Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 AL-EN
Hydrostatic Continuous level measurement 8 Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 187 Hydrostatic Level and pressure measurement Measuring principle The pressure
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Description Intelligent pressure and level transmitters for all industries
More informationTechnical Data. Dimensions
0102 Model Number Features 2 mm flush Usable up to SIL2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 2 mm Installation flush Output
More informationGA24 Technical Datasheet
GA24 Technical Datasheet Variable-area flowmeter Sturdy construction for several applications Local indication without auxiliary power Replaceable mounting parts KROHNE CONTENTS GA24 1 Product features
More informationInstruction Manual Differential Pressure Transmitter
DE13 Instruction Manual Differential Pressure Transmitter Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationDMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
More informationInstruction Manual Differential Pressure Transmitter
DE61 Instruction Manual Differential Pressure Transmitter Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
More informationRelative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the
More informationParametrable / Programmable Pressure Transmitter
Parametrable / Programmable Pressure Transmitter PTM/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available
More informationATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified
Intrinsically safe pressure transmitters ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified CUSTOMER BENEFITS Certificate: ATEX & IECEx Fast customization thanks to configurable
More informationTechnical Data. Dimensions
00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationUser s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] IM 01C25A00-12E
User s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] 12th Edition 1 1. Introduction Thank you for purchasing the DPharp electronic pressure transmitter. This manual
More informationPressure Measurement Transmitters for applications with advanced requirements (Advanced)
Siemens AG 206 Technical specifications SITRANS P DS III series for absolute pressure (from the gauge pressure series) Input Measured variable Absolute pressure Span (fully adjustable) or measuring range,
More informationATM/Ex - Analog Pressure Transmitter
Pressure Transmitter - ATEX certified ATM/Ex - Analog Pressure Transmitter CUSTOMER BENEFITS Certificate: ATEX & EAC Fast customization thanks to configurable product design Demountable electrical connector
More informationATM.ECO - Analog Pressure Transmitter
Pressure Transmitter ATM.ECO - Analog Pressure Transmitter CUSTOMER BENEFITS Entry level series into precision pressure measurement High measurement accuracy is ensured by sophisticated digital temperature
More informationLevel sensing relative and absolute pressure transmitter type 712
Level sensing relative and absolute pressure transmitter type 712 Pressure range 0... 0.3-3 bar The level sensing pressure transmitter Type 712 is manufactured using an relative or absolute pressure measuring
More informationED 701 Hygenic Pressure Transmitter
ED 701 Hygenic Pressure Transmitter Hygienic process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response time < 25 ms (Option
More informationAT9000 Advanced Transmitter Differential Pressure Transmitters
No. SS2-GTX00D-0500 AT9000 Advanced Transmitter Differential Pressure Transmitters OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and excellent
More information