Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.
|
|
- Rafe Flowers
- 6 years ago
- Views:
Transcription
1 eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / ilter regulator ilter regulator ody size ote 1) rain guide is (applicable to size ), and (applicable to size and ). ote 2) rain guide is (applicable to size ), and (applicable to size and ) ort size 3/ 1/2 ody size ote 3) escription il ith bracket ith round ote 4) pressure (ithout limit indicator) / R ote 3) Optional parts are not assembled and are supplied loose at the time of shipment. ote 4) mounting screw is for size and, and for size. is 49 type. / R "" must always be selected. Option 1 ote 5) 2 ote ) R 0.02 to 0.2 a setting etal bowl ylon bowl escription etal bowl with level ith bowl guard rain guide rain guide on-relieving ame plate, caution plate ote ) for bowl, and pressure in imperial units (I, ) /-0 R ,, hen more than one specification is required, indicate in ascending alphanumeric order. ote 5) he only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2 a or more. ote ) ithout a valve function. ote ) or thread type. his product is for overseas use only according to the new easurement Law. (he I unit type is provided for use in apan.) / tandard specifications odel luid roof pressure aximum operating pressure et pressure range connection port size Relief pressure mbient and fluid temperature ominal filtration rating rain capacity (cm 3 ) rain guide port size onstruction rease article generation grade (Refer to front matter pages 13 to 22 for details.) ombination filter regulator 1 2 R / /, 1 2 R / / / /-0,, 3/, 3/, 1/2 ir 1.5 a 1.0 a 0.05 to 0.5 a et pressure a (at relief flow rate of 0.1 l/min (R)) 5 to 0 (o freezing) 5 µm Relieving type : luorine grease : Lithium soap based grease : rade 1 : rade 1 ote ) ssembly includes a bracket and set nuts. ote 9) in part numbers for a pressure indicates a type of connection thread. o indication is necessary for R; however, indicate for. 2 / ith bracket Round pressure ith set nut 0.02 to 0.2 a setting etal bowl ylon bowl etal bowl with level ith bowl guard rain guide on-relieving type ame plate, caution plate for bowl, and pressure in imperial units (I, ) ith set nut (or panel mount) ombination available ombination not available combinations aries depending on the vailable only with thread
2 ilter regulator imensions rain racket tubing ø/4 port size in. clearance for maintenance exagon width across flats 14 anel fitting dimension late thickness /: ax. 3.5 ir cylinder Rotary actuator ir gripper to -0 rain racket tubing ø/4 connection port size in. clearance for maintenance exagon width across flats 1 anel fitting dimension late thickness /: ax. 3.5 /: ax. 5 irectional control valve low control ilter, ressure control imensions / / to -0 ith bowl guard etal bowl etal bowl etal bowl with level ittings & ubing odel / / / /-0 odel / / / /-0,, 3/, 3/, 1/2 ressure port size 0 tandard specifications ith pressure ith bowl guard etal bowl etal bowl with level specifications racket mounting size anel mount x 1 3 x x x 1.5 ir preparation ressure switch lean gas filter 3
3 eries ow to Order lean series opper, fluorine and silicon-free + Low particle generation part no. il ote 1) ote 2) racket assembly ote ) ote 9) ilter regulator ody size hread type Rc ote 1) rain guide is (applicable to size ), and (applicable to size and ). ote 2) rain guide is (applicable to size ), and (applicable to size and ). 1.0a 0.2a ith backflow mechanism ort size 3/ 1/2 / ody size / R ilter regulator with back flow mechanism ote 3) il ith round ote 4) pressure (ithout limit indicator) ith set nut (or panel mount) ote 3) Optional parts are not assembled and are supplied loose at the time of shipment. ote 4) mounting screw is for size and, and for size. / R "" must always be selected. Option 1 ote 5) 2 ote ) R ote ) 0.02 to 0.2 a setting etal bowl ylon bowl escription etal bowl with level ith bowl guard rain guide rain guide on-relieving type /-0 R ,, is 49 type. hen more than one specification is required, indicate in ascending alphanumeric order. ote 5) he only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2 a or more. ote ) ithout a valve function. ote ) or thread type. his product is for overseas use only according to the new easurement Law. (he I unit type is provided for use in apan.). / odel luid roof pressure aximum operating pressure et pressure range connection port size Relief pressure mbient and fluid temperature ominal filtration rating rain capacity (cm 3 ) rain guide port size onstruction rease tandard specifications article generation grade (Refer to front matter pages 13 to 22 for details.) filter regulator ombination with backflow mechanism 1 2 R / /, 1 2 R / / / /-0,, 3/, 3/, 1/2 ir 1.5 a 1.0 a 0.05 to 0.5 a et pressure a (at relief flow rate of 0.1 l/min (R)) 5 to 0 (o freezing) 5 µm escription ith bracket Relieving type : luorine grease : Lithium soap based grease : rade 1 : rade 1 ote ) ssembly includes a bracket and set nuts. ote 9) in part numbers for a pressure indicates a type of connection thread. o indication is necessary for R; however, indicate for. 4 / ith bracket Round pressure ith set nut 0.02 to 0.2 a setting etal bowl ylon bowl etal bowl with level ith bowl guard rain guide on-relieving type ame plate, caution plate for bowl, and pressure in imperial units (I, ) ombination available ombination not available combinations aries depending on the vailable only with thread ame plate, caution plate for bowl, and pressure in imperial units (I, )
4 ilter regulator with back flow mechanism imensions rain racket tubing ø/4 port size learance for maintenance exagon width across flats 14 anel fitting dimension late thickness /: ax. 3.5 ir cylinder Rotary actuator ir gripper to -0 racket tubing ø/4 port size anel fitting dimension irectional control valve rain learance for maintenance exagon width across flats 1 late thickness /: ax. 3.5 /: ax. 5 low control ilter, ressure control imensions / / to -0 ith bowl guard etal bowl etal bowl etal bowl with level ittings & ubing odel /, /, 3/ /, 3/, 1/2 /-0 odel / / / /-0 ressure port size 0 tandard specifications ith pressure ith bowl guard etal bowl etal bowl with level specifications racket mounting size anel mount x 1 3 x x x 1.5 ir preparation ressure switch lean gas filter
5 .R. recautions 1 e sure to read before handling. arning esign 1. he standard bowl for the air filter and filter regulator are made of polycarbonate. o not use in an environment where they are exposed to or come in contact with organic solvents, chemicals, cutting oil, synthetic oil, ester based compressor oil, alkali, and thread lock solutions. 2. void applications where pressurized air is frequently introduced to and released from the standard bowl of an air filter, or filter regulator. It may cause the bowl to be damaged. se of a metal bowl is recommended for such applications. 3. Regulator and filter regulator e sure to install a safety device to prevent damage or malfunction of the outlet side components when the output pressure exceeds the set pressure value. aution 1. elect a that is suitable for desired purity by referring to the 's est neumatics catalog. 2. omponents cannot be used for applications that are outside the range of specifications. lease consult with when you anticipate using the component outside the range of its specifications (such as temperature and pressure). 3. ist separator and micro mist separator esign the system so that the mist separator and micro-mist separator are installed where there is less pulsation. pressure difference between internal and external pressure inside the element should be kept within 0.1 a, as exceeding this value can cause damage. arning 1. he grease (: luorine, : ineral) used on internal sliding parts and seals may run down to outlet side components. lease consult with if this is not desirable. 2. Regulator and filter regulator election 1) Residual pressure release (outlet pressure release) is not complete by releasing the inlet pressure. o release residual pressure, select a with a back flow mechanism. sing a without a back flow mechanism makes for inconsistent residual pressure release (i.e., residual pressure may or may not be released) depending upon the operating conditions. 2) lease contact if air will not be consumed in the system for a long period of time, or if the outlet side will be used with a sealed circuit and a balanced circuit, as this may cause the set pressure of the outlet side to fluctuate. 3) et the regulating pressure range for the outlet pressure of the regulator in a range that is 5% or less of the inlet pressure. If set to above 5%, the outlet pressure will be easily affected by fluctuations in the flow rate and inlet pressure, and become unstable. 4) safety margin is calculated into the maximum set pressure range appearing in the catalog's specification table. herefore, the outlet pressure may exceed the set pressure. 5) lease contact when a circuit requires relief sensitivity or setting accuracy with high precision. 4. Regulator and filter regulator ir consumption is 0.1 l/min (R) or less under standard specifications. lease consult with, if this value is not allowable. 00
6 .R. recautions 2 e sure to read before handling. aution ounting 1. o avoid reversed connections of the air inlet/outlet, make connections after confirming the "/" mark or arrows that indicate the direction of air flow. Reversed connections can cause malfunction. 2. omponents with a bowl, e.g., air filter, filter regulator must be installed vertically with the bowl downward so that faulty drain discharge and dripping can be verified. 3. nsure sufficient top, bottom, and front clearance for maintenance and operation of each component. Refer to the dimensions section for the minimum clearance for each component. 4. Regulator and filter regulator e sure to unlock the knob before adjusting the pressure and to lock it after the pressure is set. 5. rain piping 1) he drain guide bowl of a filter or filter regulator is not provided with a valve function to exhaust drainage. Install valves onto the drain guide before supplying air to discharge air and drainage. 2) hen piping the drain guide bowl of the filter or filter regulator, first secure the drain guide with a wrench. ailure to secure the drain guide may result in bowl damage. aution ir supply 1. hen there is excessive drainage Install the dryer or water separator (rain atch) before the air filter or filter regulator. djustment 1. Regulator and filter regulator 1) et the regulator while verifying the displayed values of the inlet and outlet pressure s. urning the knob excessively can cause damage to the internal parts. 2) o not use a tool on the pressure regulator knob as this can cause damage. It must be operated manually. 1. Regulator and filter regulator 1) e sure to check the inlet pressure before setting the outlet pressure. 2) he pressure included with regulators for 0.02 to 0.2 a setting is for up to 0.2 a only. o not apply pressure exceeding 0.2 a. It can damage the pressure. 3) o set the pressure using the knob, turn the knob in the direction that increases pressure and lock the knob after the pressure is set. If this is done in the direction that decreases pressure, the pressure may drop from the original set pressure. urning the knob clockwise increases the outlet pressure, and turning it counterclockwise reduces the pressure. 1. o screw piping materials into components, tighten with a recommended tightening torque while holding the female thread side. If the minimum tightening torque is not observed, this can cause a looseness and seal failure. On the other hand, excess tightening torque can cause damage to the thread. urthermore, tightening without holding the female thread side can cause damage due to the excess force that is applied directly to the piping bracket. Recommended tightening torque orque arning aution onnection thread arning to 9 12 to 14 iping 3/ 22 to 24 1/2 2 to 2 to nit: m 1 3 to 3 ir cylinder Rotary actuator ir gripper irectional control valve ittings & ubing lean gas filter ressure switch low control ilter, ressure control ir preparation 01
7 .R. recautions 3 e sure to read before handling. arning aintenance 1. hen disassembly or installation is required during the maintenance, repair, or replacement of a device, be sure to follow the instructions provided in the instruction manual or safety instructions in this catalog. 2. erform periodical inspections to detect any cracks, scratches, or other deterioration of the transparent resin bowl of the air filter and filter regulator. Replace with a new bowl or metal bowl when any kind of deterioration is found, otherwise this can cause damage. 3. erform periodical inspections to detect dirt on the transparent resin bowl of the air filter and filter regulator. hen you find dirt on any of the above devices, clean with a household neutral detergent. o not use other cleaning agents, otherwise this can cause damage. 4. ir filter 1) Replace the element every 2 years or when the pressure drop becomes 0.1 a, whichever comes first, to prevent damage to the element. 2) Release accumulated condensate periodically before it reaches the maximum capacity. ondensate that flows out to the outlet side can cause malfunctions. 5. ist separator and micro mist separator 1) Replace the element every 2 years or when the pressure drop becomes 0.1 a, whichever comes first, to prevent damage to the element. 2) Release accumulated condensate periodically before it reaches the maximum capacity. ondensate that flows out to the outlet side can cause malfunctions. aution 1. erform periodical inspections of the filter element and replace it as necessary. heck the element whenever the outlet pressure drops below normal or air does not flow smoothly during operation. 2. Regulator and filter regulator heck the sliding part or seat of the internal valve when a setting malfunction or relief leakage occur and temporary or emergency repairs need to be made. 02
Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)
eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof
More informationFilter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4
eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationHow to Order. Rc NPT 1/8 1/4 3/8 1/2
AWM 3 AWD 3 Mist Separator Regulator AWM2 to AWM4 Micro Mist Separator Regulator AWD2 to AWD4 3 E 3 E How to Order Mist Separator Regulator 1 2 Micro Mist Separator Regulator The AWM series is made up
More informationM9N. Nil. s n. Type of auto switch. Refer to the table below for auto switch part numbers.
eries XP/XP ir slide table ø, ø1, ø12, ø1 ow to Order lean series 11 acuum suction type 11 XP 12 1 9N 22 XP 12 1 9N opper, fluorine and silicon-free + low particle generation 22 acuum suction type ore
More informationFilter-Regulator-Lubricator
Models: 10671-1/2" NPT Filter 10673-1/2" NPT Regulator 10675-1/2" NPT Lubricator 10677-1/2" NPT Filter-Regulator 10679-1/2" NPT Regulator-Lubricator 10681-1/2" NPT Filter-Regulator-Lubricator Parts Page
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationFilter-Regulator-Lubricator
Filter-Regulator-Lubricator 1/2" NPT Inlet/Outlet Ports PD16.19 July, 2016 Machine Parts & Operating Instructions Save This Document and Educate All Personnel WARNING Always follow the safety instructions
More informationF.R.L. Units Precautions 1 Be sure to read this before handling.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc.,
More informationF.R.L. Units Precautions 1 Be sure to read this before handling products.
Precautions 1 1. Confirm the specifications. Products represented in this catalog are designed only for use in compressed air systems (including vacuum). Do not operate at pressures, temperatures, etc.,
More informationModular Type Regulators
Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot
More informationSeries SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationRelated Products: Auto Drain Valve. Model/Specifications. Model
Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationNew Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A
Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator
More informationModular F.R.L. Units. New. New. Series AC 46% Better visibility and environmental resistance. Energy saving regulator
Modular F.R.L. Units New RoHS etter visibility and environmental resistance Double layer design The bowl is covered with a transparent bowl guard! The inside is visible from 36. The bowl is completely
More informationMaximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications
Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationRegulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut
Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options
More informationClean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationRecommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material
Series K Clean one-touch fittings For blowing Recommended applicable olyolefin: Series T Tubing material Soft polyolefin: Series TS Tubing O.D. ø, ø, ø, ø, ø olyurethane Series TU, Nylon Series T, and
More informationSeries 10-IRV10/20. Vacuum Regulator C08 IRV C08 IRV 20 A. How to Order. Standard connections. Single sided connections. Accessory w Nil G ZN ZP ZA ZB
Vacuum egulator eries -IV/ How to Order tandard connections IV C08 traight Clean series ody size Max. flow 140 L/min (N) Max. flow 240 L/min (N) L Fittings traight Connection tubing O.D. ymbol ubing O.D.
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationMINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4
P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation
More informationlternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0
ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationVacuum Regulator. IRV10/20 Series. Weight reduced by. RoHS ARJ ARX AMR ARM ARP IR -A IR IRV VEX SRH SRP SRF ITV
Vacuum egulator IV0/ eries oh AJ A45 ingle ided Connections eries AX For ease of installation and panel mounting AM AM Integrated digital pressure switch for panel mounting I -A I (Made to Order) ingle
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationModular Air Combination Units
...... 12-25 NAC1 ~ 6 series.................................. 12-16 Filter + Regulator + Lubricator NAC11 ~ 41 series.................................. 17-18 Filter/Regulator + Lubricator NAC12 ~ 62 series..................................
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationRelated products. Components for air preparation and pressure adjustment / F.R.L. unit. Pressure gauge. Indidcator
Related products Pressure gauge / indicator omponents preparation and pressure adjustment / unit Refrigerating ir uto. drain ir Pressure gauge ONTENTS Pressure gauge assembly (G401-W) 660 With safety mark
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationIR1000-A IR1010-A IR1020-A
Document No. IR -OMT0020 PRODUCT NAME Precision Regulator MODEL / Series / Product Number IR1000-A IR1010-A IR1020-A Contents Safety Instructions 1 to 5 1. Application 6 2. Specifications 6 3. Construction
More informationThe plastic bowl guard does not corrode. The draining method is selectable between the push type and the auto drain type.
he plastic bowl guard does not corrode. he draining method is selectable between the push type and the auto drain type. he air filter is designed for draining and removal of foreign matter. (Element: 5µm)
More information/ Air Line Kit AL - M1202. / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651
/ Air Line Kit AL - M1202 / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651 002 1 Thank you for purchasing the Air Line Kit " AL - M1202 ". This Air Line Kit is designed to adjust the air supply
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationPrecision Regulator. Series Model Regulating pressure range Port size Page
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationSeries AMJ. Drain Separator for Vacuum
CAT.E 827- Drain Separator for Vacuum Remove water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps
More informationSeries variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
More informationLUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS
AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight
More informationElectro-hydraulic Proportional Flow and Direction Control Valve
lectro-hydraulic control valve his valve uses a D solenoid in a traditional 4- way solenoid valve to create a solenoid valve capable of both direction switching and highspeed control. he lineup consists
More informationBooster Regulator/Air Tank
Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed
More informationTypes 749B and R130 Changeover Manifolds
Instruction Manual MCK-1179 Types 749B and R130 June 2012 Types 749B and R130 Changeover Manifolds TYPE HSRL-749B TYPE 64SR/122 TYPE R130/21 TYPE 749B/21 Figure 1. Changeover Manifolds and Regulator Assemblies
More informationOperation Manual Air Saver Unit ASV5000 Series
9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.
More informationDoc. No.SYJ300-OMO0002-A. Air Operated Valve PRODUCT NAME. SYJA300 / SYJ3000 Series MODEL/ Series
Doc. Air Operated Valve PRODUCT NAME SYJA300 / SYJ3000 Series MODEL/ Series Contents Safety Instructions ---------------------------------------------------------------------------- 2,3 Precautions on
More informationSelf-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type.
Process Pump Series 3/5 Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted
More informationFlow Characteristics NAR1 NAR 9 6 M5X.8 NAR2 NPT 3/ Flow (scfm) NAR5 NPT 3/ Flow (scfm) Flow (
How To Order NAR 1, 2, 25,, 4, 5, 6 Regulator Body size 1 M5 2 1/8 25 1/4 3/8 4 1/2 5 3/4 6 1 NAR N 3 BG 1N Port Thread Nil Rc(PT) F G(PF) N NPT Accessories and Combinations Accessory Suffix 1 4 N R Port
More informationAir operated valve. VGA342R Series
Doc. No.VG300***-OMH0006-A PRODUCT NAME Air operated valve MODEL / Series / Product Number VGA342R Series Contents Safety Instructions ----------------------------------------------------------------------------
More informationRHPS Series PRV 2 all types of connections User Manual
RHPS Series PRV 2 all types of connections User Manual Read the complete manual before installing and using the valve. Before removing a valve from the system for service, you must depressurize system
More informationRHPS Series PRV 6 User Manual
RHPS Series PRV 6 User Manual Read the complete manual before installing and using the valve. 1 WARNING Before removing a valve from the system for service, you must depressurize system purge the system
More informationSeries AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use
CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and
More informationOperating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationPVC Quick Drain Valve
PVC Quick Drain Valve LVW Series Complies to JIS standard for polyvinyl chloride piping (JIS K 6742) Applicable fluids: Deionized water, Chemical liquids Application Example Cleaning Equipment Process
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationPressure Control (and Check) Valve
Pressure ontrol (and heck) Valve PRSSUR OTRO (A ) VAV 50 to 80l/min 4Pa eatures qthis circuit control valve works as a sequence valve, unloading valve, and counter balance valve. waximum operating pressure
More informationModel GPR Primary Pressure Regulating Valve. Instruction Manual
Model GPR-2000 Primary Pressure Regulating Valve Instruction Manual Please read this instruction manual thoroughly before using the primary pressure regulating valve, so that you may do so correctly and
More informationOPERATING AND MAINTENANCE MANUAL
Series 4300 Engineered Performance TABLE OF CONTENTS 0 INTRODUCTION 1 1 Scope 1 2 Description 1 3 Specifications 1 0 INSTALLATION 1 1 Mounting 1 2 Piping 1 1 Connecting Process Pressure 2 2 Vent Connections
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationDoc. No. AC -OMQ0008-B PRODUCT NAME AIR COMBINATION. MODEL/ Series AC10(A,B)- -A AC20(A,B,C,D)- -A AC25(B,C)- -A AC30(A,B,C,D)- -A AC40(A,B,C,D)- -A
Doc. No. AC OMQ0008B PRODUCT NAME AIR COMBINATION MODEL/ Series AC10(A,B) A AC20(A,B,C,D) A AC25(B,C) A AC30(A,B,C,D) A AC40(A,B,C,D) A Contents PAGE 1. PRECAUTION FOR SAFETY 1~8 2. APPLICATION 9 3. SPECIFICATIONS...
More informationAir Saving Valve. Pressure Valve Flow Valve
Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction
More informationVACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
More informationSeries VBA1110 to 4200
Booster Regulator Series 0 to 4200 Specifications increase ratio Max. supply pressure Set pressure range Ambient and fluid temperature Lubrication Installation adjustable mechanism 0-02 400-04 Handle operated
More informationLow torque Metal seal type Rotary joint
CAT.E0- A Low torque Metal seal type Rotary joint Long Life 0. to billion rotations Under SMC s life test conditions. Flexible Coupling Fixed (Body) Low rotational torque 0.00 to 0.0 N.m or less Rotary
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationMF2M Monnier Miniature Compressed Air Filter
5040050 / 2 IM-P504-02 CH Issue 2 MF2M Monnier Miniature Compressed Air Filter Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationAir Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.
Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu
More informationProcess Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order
Process Pump /5 Series Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted areas.
More informationPressure booster combination DPA-CRVZS. Operating instructions a [ ]
Pressure booster combination en Operating instructions 8074546 2017-07a [8074548] Original instructions -EN Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which
More informationB2KL: 6-way ball valve with male thread, PN 16
Product data sheet 3.1 58.001 K: 6-way ball valve with male thread, PN 16 How energy efficiency is improved fficiency means precise control and low actuating forces eatures 6-way ball valve for changeover
More informationMounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
More informationProcess Pump. Series PAF3000/Series PAF5000
Process Pump Series 3/Series The excellent corrosion resistance is achieved due to the new PFA wetted material construction! PPS/PFA dual construction, withstand pressure and heat cycle performance have
More informationSIX R (P ) AND SEVEN R (P ) POSITION CYLINDERS Service Information
SIX R431006322 (P -063892-00001) AND SEVEN R431006321 (P -063981--00002) POSITION CYLINDERS Service Information The six and seven position cylinders are medium duty pneumatic positioning devices that operate
More informationThe products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model UAMR AD- L
his modular type unit offers a rich variety of combinations and features easy maintenance. Air Filter (1) (2) (3) (4) Regulator Mist Filter or Micromist Filter (5) (6) (1) ype (2) Unit combination Code
More informationModel: 720-UL INSTALLATION OPERATION MAINTENANCE. Bermad Pressure Reducing Valve IOM. Model: FP -720-UL Sizes: 2"-12" BERMAD. Application Engineering
Bermad Pressure Reducing Valve Model: 720-UL INSTALLATION OPERATION MAINTENANCE Application Engineering BERMAD 1. Safety First BERMAD believes that the safety of personnel working with and around our equipment
More informationList of Contents VMA. System description 2. Individual Units Pre-Filters 3. Combinations 6. Accessories and Main spare parts 6
List of Contents VMA System description Individual Units Pre-Filters 3 Micro-Filters Activated-Charcoal-Filters 5 Combinations Accessories and Main spare parts Service Units G 1 / Pre-Filter Micro-Filter
More informationApollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
More informationTESCOM 50-4X Series Safety, Installation & Start-Up Procedures
Operations & Service Manual TESCOM 50-4X Series Safety, Installation & Start-Up Procedures Do not attempt to select, install, use or maintain this product until you have read and fully understood this
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationHow to Order. Body size. Pressure: 2 MPa. Pressure increase ratio 0 Twice. Symbol. Thread type. Body size
Booster Regulator Series VBA How to Order VBA 0 series VBA 0 0 Body size /4 Pressure: MPa Pressure increase ratio 0 Twice Thread type Symbol F Thread type G Port size Symbol Port size 0 /4 Symbol VBA0-0
More informationSeries K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
More informationSpecifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style
Finger Valve SeriesVHK Large effective area: to mm 2 Small knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. Selection
More informationLRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
More informationTech Tips. Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves
Service Call: Adjustable Hydraulic Valves Flow controls Pressure controls Sequence valves Holding valves Tools Required: Flow Meter Pressure gauge Holding valve test block Wrenches for installation of
More informationE 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More information