Level Plus. Liquid-Level Sensors With Temposonics Technology. Product Specification. M-Series Model MG Transmitter Digital Output F SENSORS
|
|
- Mildred Snow
- 6 years ago
- Views:
Transcription
1 Features Level Plus Liquid-Level Sensors With Temposonics Technology M-Series Model MG Transmitter Digital Output Modbus and FOUNDATION fieldbus Output -in-1 Measurement Product Interface Temperature 100 point strap table No Scheduled Maintenance or Recalibration API Temperature Corrected Volumes Non-linearity 0.008% F.S. Applications Custody Transfer Inventory Control Bulk Storage Sanitary Process Control Markets Petroleum/Petrochemical Propane Terminals Biotech / Pharmaceuticals Food and Beverage Water and Wastewater Product Specification NEMA Type X Enclosure Sanitary Transmitter Product overview SENSORS 078 F The M-Series Model MG transmitter satisfies the demand for a digital communication interface in the Liquid Level marketplace for vessels from 0 inches to 60 feet. Outputs for the Model MG include Modbus, FOUNDATION fieldbus, and DDA (a proprietary ASCII protocol). Modbus and DDA outputs are communicated via a -wire multi-drop power and data bus (EIA 8), whereas FOUNDATION fieldbus has a specified -wire bus. Utilizing the bus networks eliminates the requirements for individual cable runs from each tank and these three data formats provide a direct interface to most types of computers and digital communication equipment. The Model MG provides -in-1 sensing through one process opening of the product level, the interface level, and temperature. The Modbus and FOUNDATION fieldbus output also allow the user to measure volume from a 100 point strap table with the option for temperature correction. Once the transmitter is installed and calibrated there is no requirement for scheduled maintenance or recalibration. Set it and forget it! Single Chamber Housing Rigid Transmitter Dual Chamber Housing Flexible Transmitter All specifications are subject to change. Contact MTS for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only. Go to for the latest support documentation.
2 Product specifications Parameters Specifications LEVEL OUTPUT Measured variable: Product level and interface level Output: Modbus RTU, DDA or FOUNDATION fieldbus Measurement Flexible transmitter: 08 mm (10 in.) to range: 000 mm (866 in.) Rigid transmitter: 08 mm (0 in.) to 760 mm (00 in.) Sanitary transmitter: 08 mm (0 in.) to 760 mm (00 in.) Non-linearity: 0.008% F.S. or 1.6 mm (1/16 in.)* Hysteresis: 0.00% F.S. or 0.66 mm (0.01 in.)* (any direction) Resolution: Up to 0.0 mm (0.001 in.) Time constant: 1- second (typical) Temperature output Measured variable: Temperature accuracy: Computed variables (Modbus and FOUNDATION fieldbus): electronics Input voltage range: Reverse polarity protection: Lightning/ Transient protection: Safety approvals: Modbus and DDA Safety approvals FOUNDATION fieldbus: Average and multi-point temperature Up to 1 Modbus Up to, DDA and FOUNDATION fieldbus ±0.8 C (±0. F) Gross volume Mass Net volume Alarms Modbus and DDA: 10. to 0.1 Vdc, 8 Vdc maximum for I.S. ATEX approval FOUNDATION fieldbus: 9 to Vdc bus powered Series diode Stage 1: line-to-ground surge suppressors; IEC Stage : line-to-line and line-to-ground transient suppressors; IEC FM/CSA: Explosion-proof Class I, Groups B, C and D Class II, Groups E, F and G Division 1, NEMA Type X Models: Explosion-proof housing req. FM/CSA: Intrinsically safe Class I, Groups A, B, C and D Class II, Groups E, F and G Division I, NEMA Type X Division, Non-Incendive ATEX: Intrinsically safe EEx ia IIA & IIB T (con tact factory for model numbers). FM/CSA: Explosion-proof Class I, Groups B, C and D Class II, Groups E, F and G Division 1, NEMA Type X Models: Explosion-proof housing required FM/CSA: Intrinsically safe pending ATEX: Intrinsically safe pending M-Series Model MR Liquid-Level Transmitter, Digital Output - Product Specification, 078 F Parameters calibration Zero adjust range: Span adjust range: environmental Sealing: Humidity: Operating temperatures: Specifications Anywhere within the active length. Full scale to 1 mm (6 in.) from zero O-Ring sealed for outdoor use (NEMA Type X) 0 to 100% relative humidity, noncondensing Electronics: -0 C (-0 F) to 71 C (160 F) Sensing element: -0 C (-0 F) to 1 C (7 F) Temperature element: -0 C (-0 F) to 10 C (1 F) Vessel pressure: Dependent on float pressure rating (18.7 bar (7 psi) max. - flexible outer pipe) Materials (wetted parts): Wetted parts: 16L stainless steel Non-wetted parts: 16L SS, Epoxy coated aluminum field installation Length 08 mm (0 in.) to 1888 m (70 ft.) (excluding housing): Housing dimensions: Mounting: Wiring: Modbus or DDA Wiring: FOUNDATION Fieldbus Single chamber enclosure: ( in.) by 1 mm (.8 in.). 119 mm (.70 in.) O.D. Dual chamber enclosure: ( in.) by 177 mm (6.9 in.). 109 mm (.8 in.) O.D. NEMA Type X enclosure: 81 mm (. in.) by 1 mm (.8 in.) Rigid pipe: / in. NPT adjustable fitting, flange mount Flexible pipe: 1 in. NPT adjustable fitting, Tri-clamp -wire connections + earth ground/tank ground, 1/ in. NPT conduit opening NEMA (NEMA Type X), / in. NPT (XP housing) -wire Type A fieldbus cable 1/ in. NPT conduit opening (NEMA Type X), / in. NPT XP housing * Whichever is greater ** Must specify at time of order, not on all units. Contact factory for other materials. Contact factory for longer lengths. Length dependent. Contact factory for higher temperatures. Contact factory for higher pressures. Flexible sensing elements come standard with flexible pipes. Rigid sensing elements come standard with rigid pipes. A flexible sensing element is optional for a rigid pipe configuration. Minimum length of 0 mm (80 in.) for 1 temperature positions. All specifications are subject to change, contact MTS for specifications critical to your needs.
3 Typical installation and mounting, rigid pipe Illustrated below are three typical product installation and mounting methods for rigid pipe applications. For information about typical floating roof and typical cone roof installation methods see page 6. Rigid transmitter pipe installation and mounting references ( in.) Threaded / in. NPT - compression fitting, male 9 mm (.7 in.) 16 mm (6. in.) 11 mm (.7 in.) O.D. 9 mm (.7 in.) Minimum height 10 mm (8. in.) max. / in. NPT fitting Riser Tank flange (provided by customer) Order length 08 mm (0 in.) to 760 mm (00 in.) Teflon, 6100 mm (0 in.) max. Level 1 Float (Order Separately) Level Float (Order Separately) Tank flange Outer pipe 16 mm (0.6 in.) O.D. Welded RF flange DT Custom Positions Modbus Tip of transmitter 1 / in. NPT Adjustable fitting 9 mm (.7 in.) minimum DDA & F.F. Tank flange (provided by customer) Order length Pipe diameter 16 mm (0.6 in.) Transmitter Inactive Zone (see table) 1 Tip of Transmitter Transmitter inactive zone: 16L SS, 7 mm (.9 in.) 7 mm (.9 in.) min. Inactive zone 1. Drawings are for reference only.. Contact factory for engineering drawings.. Application worksheets are available at Tip of transmitter M-Series Model MG Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
4 Typical installation and mounting, sanitary pipe Illustrated below are three typical product installation and mounting methods for sanitary pipe applications. For information about typical floating roof and typical cone roof installation methods see page 6. sanitary pipe installation and mounting references 1 mm (.8 in.) 1 mm (6 in.) 81 mm (.19 in.) XP Housing 6. mm (. in.) NEMA Housing 8 mm (1.9 in.) Sanitary Process Connection (Size) Sanitary clamp (customer supplied) Top view Customer supplied cable (1 ft.) connected to terminal strip Sanitary process connection, sanitary cap (welded to sensor pipe) Mating process connection (customer supplied) Riser Order Length 08 mm (0 in.) to 760 mm (00 in.) Level 1 Float (Order Separately) Pipe, 16 mm (0.6 in.) O.D. Constructed of 16L SS DT Custom Positions Modbus Sanitary float (permanently mounted on some pipe styles) Level Float (Order Separately) 7 6 Tip of transmitter transmitter inactive zones TB, CP 81 mm. in. DP, DN 7 mm.9 in. 1 DDA & F.F. Inactive zone: 81 mm (. in.) from tip (typical) Inactive zone: 7 mm (.9 in.) from tip (typical) CP Clean-in-place DN Drain-in-place, no through hole Transmitter Inactive Zone (see table) 1 * TB Sanitary* Inactive zone: 81 mm (. in.) from tip (typical) DP Drain-in-place w/end plug Inactive zone: 7 mm (.9 in.) from tip (typical) * This end plug style has permanently mounted floats floats cannot be removed from pipe. 1. Drawings are for reference only.. Contact factory for engineering drawings.. Application worksheets are available at M-Series Model MR Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
5 Typical installation and mounting, flexible pipe Illustrated below are three typical product installation and mounting methods for flexible pipe applications. For information about typical floating roof and typical cone roof installation methods see page 6. flexible pipe installation and mounting references 11 mm (.7 in.) O.D. 1 in. NPT adjustable fitting Stainless-steel flexible pipe ( in.) 10 mm (8. in.) max. Tank flange (provided by customer) Riser Product float Interface float Bottom-fixing weight, magnet or hook transmitter inactive zones < ft. 76 mm in. <0 ft. 96. mm.8 in. <60 ft. 119 mm.7 in. Order length m (10 in.) to 18 m (70 in.) 0 mm (1 in.) Outer Pipe, Constructed of 16L SS Flexible Pipe, mm (0.87 in.) O.D. Level 1 Float (Order Separately) Level Float (Order Separately) Threaded 1 in. NPT - Compression Fitting, Male DDA & F.F. 686 mm (7 in.) Tank Flange Optional Welded RF Flange DT Custom Positions Modbus Total Inactive Zone Transmitter Inactive Zone See Table 1 in. (typ.) Bottom-Fixing Hook ( in.) Bottom-Fixing Weight 76 mm ( in.) Bottom-Fixing Magnet 1. Drawings are for reference only.. Contact factory for engineering drawings.. Application worksheets are available at M-Series Model MG Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
6 Typical tank mounting and floating roof and cone roof installations Illustrated below are tank mounting, floating roof installation, floating roof and cone roof methods. typical tank mounting Single entry into tank Easy to install Product and interface level measurement Single and multi-point temperature Average temperature of submerged DTs Modbus and FOUNDATION fieldbus outputs provide gross volumes, net volumes, mass and alarms DDA output provides product and interface, level and temperature Note: 11 mm (.7 in.) O.D. Order length 9 mm (.7 in.) (typical) Product level ( in.) 10 mm (8. in.) max. / in. NPT adjustable fitting Vessel flange Float magnet Drawings are for reference only. Contact factory for engineering drawings. Interface Optional stop collar E-ring float clip Vessel bottom External floating roof installation typical Fixed floating roof installation 11 mm (.7 in.) O.D. 1 in. NPT Customer provided tank-gauge bracket MTS ( in.) 10 mm (8. in.) max. Customer wiring conduit 11 mm (.7 in.) O.D. Blind-flange drilled for 1 in. NPT Existing tank riser Tank top ( in.) MTS 10 mm (8. in.) max. Customer wiring conduit Gauge well and cover Floating roof Product level Product level Float Float Flex pipe Flex pipe Optional BS&W float Bottom fixing magnet or weight Bottom-fixing magnet or weight M-Series Model MR Liquid-Level Transmitter, Digital Output - Product Specification, 078 F 6
7 Interface and enclosure options MTS DDA protocol MTS DDA proprietary protocol IS developed for use in intrinsically safe areas. The M-Series Model MG transmitter is backwards compatible with existing IS installations of D8/D9 and LDF MTS sensors, as long as the total number of transmitters does not exceed 8 per monitor. The DDA protocol allows the transmitter to be in a low power or idle mode while not pro cessing commands. This protocol allows for level, interface and temperature data to be output from the transmitter. Modbus RTU protocol The Modbus RTU protocol is available for use in explosion-proof areas and allows the M-Series Model MG transmitter to communicate level, temperature and volume information directly from the transmitter head. foundation fieldbus PROTOCOL FOUNDATION fieldbus H1 is intended primarily for process control, field-level interface and device integration. Running at 1. kbit/s, the technology interconnects field networked devices such as transmitters and actuators. FOUNDATION fieldbus H1 is designed to support intrinsically safe (I.S.) applications and operate on an existing twisted pair instrument cabling with power and signal on the same wire. enclosure options Note: Drawings are for reference only. Contact factory for engineering drawings. nema type x enclosure 1 mm (.8 in.) O.D. Top View 1 mm (6 in.) 81 mm (.19 in.) Factory supplied cable connected to internal terminal strips single cavity enclosure dual cavity enclosure ( in.) 1 mm (.8 in.) ( in.) 81 mm (.18 in.) 177 mm (6.9 in.) 11 mm (.7 in.) O.D. 10 mm (8. in.) max. / in. NP conduit a 10 mm (8. in.) max. 11 mm (.7 in.) O.D. / in. NPT conduit access 7 M-Series Model MG Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
8 M-Series Model MG, Digital transmitter - Ordering information Use the guide below to build a model number for the M-Series Model MG transmitter. A model number is required to place an order and is helpful in identifying installed products. For standard accessory information, refer to page 9 or the Liquid-Level Accessories Catalog (part no. 110) for additional information. transmitter model = M 1 m = Magnetostrictive transmitter type = G G = Digital output level transmitter a = Vdc input power = A output power = M = Modbus RTU data format T = Modbus sight glass D = MTS DDA F = FOUNDATION fieldbus S = FOUNDATION fieldbus sight glass housing type = = NEMA Type X, 16L stainless steel with NPT and internal C = Dual cavity (explosion-proof and intrinsically safe) terminal blocks (Intrinsically safe only) b = Single cavity (explosion-proof and intrinsically safe) l = NEMA Type X, 16L w/6-pin connector electronics mounting = 6 1 = Integral electronics transmitter pipe = 7 b = Industrial end-plug with stop collar f = Sanitary, drain-in-place, no hole, DN c = Sanitary, T-bar, TB m = Flexible w/bottom fixing hook (stainless steel only) d = Sanitary, drain-in-place, DP n = Flexible w/bottom fixing weight (stainless steel only) e = Sanitary, clean-in-place, CP p = Flexible w/bottom fixing magnet (stainless steel only) materials of construction (wetted parts) = 8 Note: contact factory for other materials 1 = 16L stainless steel a = Teflon = Electropolished 16L stainless steel Ra 1 C = CRN Approved process connection type = 9 1 = NPT, Adjustable = Sanitary, welded = Sanitary, adjustable 6 = 10 lbs. welded RF flange 7 = 00 lbs. Welded RF flange 8 = 600 lbs. welded RF flange X = None process connection size = 10 A = ¾ in. (NPT only) Rigid pipe only B = 1 in. (NPT only) Flex pipe only C = 1½ in. D = in. E = ½ in. F = in. G = in. H = in. (except sanitary) J = 6 in. X = None TEMPERATURE (DIGITAL THERMOMETERS) = 11 0 = None 1 = One DT, 0 mm (8 in.) when order length is less than 91 mm (6 in.) = One DT, customer defined position = Five DTs, evenly spaced as API (if this option is selected, option 18 E must also be selected) K = Twelve DTs, evenly spaced per API 6 = Five DTs, customer defined position (if this option is selected, option 18 E must also be selected) L = Twelve DTs, customer defined position unit of measurement = 1 M = Metric (millimeters) Encode length in millimeters if using metric (XXXXX mm) U = US Customary (inches) Encode length in inches if ordering in US Customary (XXX.XX in.) length = 1-17 = Order length based on unit of measurement - Rigid transmitter pipe length;\: 08 mm (0 in.) to 760 mm (00 in.) and Flexible transmitter pipe length: 00 mm (10 in.) to 000 mm (866 in.) special = 18 s = Standard product e = Engineering special (not affecting agency controlled parts or features) M-Series Model MR Liquid-Level Transmitter, Digital Output - Product Specification, 078 F 8
9 Model MG - Accessories overview, floats Product & Dimensions Pressure Temp. Magnet Offset Type Specific Gravity Material Weight Offset Part Number STANDARD RIGID FLOAT 18 mm (0.70 in.) dia. 0.6 SS No mm (.01 in.) 9. bar ( psi) No Product 0.67 SS Yes 1981-* 0.68 Hastelloy C No mm (1.8 in.) dia Hastelloy C Yes 1981-* CRITICAL SERVICE FLOAT 18 mm (0.7 in.) dia. 0. SS No mm (.7 in.) 9. bar ( psi) No Critical service 89 mm (. in.) dia. 0. SS Yes 169-* STANDARD SANITARY FLOAT 108 mm (. in.) 18 mm (0.7 in.) dia. Centerline of magnet SS 00 Grit/ Ra No Yes 011-* 89 mm (. in.) 7 mm (1.8 in.) dia. 10. bar (10 psi) Yes Sanitary 0.66 SS 0 Grit/ Ra 1 No 011-* Yes 011-* STANDARD FLEX FLOAT Product 0. SS No * 0. Hastelloy C No 0709-* (.98 in.) 6 mm (.9 in.) 8 mm (1.10 in.) 10 mm (.11 in.) Magnet 7.9 bar (0 psi) No Interface SS No 071-1* Hastelloy C No 071-* SS No 08-1* Hastelloy C No 08-* 1. *Call the factory for specific lead times. Typical lead time exceeds lead time of the sensor.. Drawing contained in this document are for reference only. Contact the factory for engineering drawings. 9 M-Series Model MG Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
10 6.9 in. (00.0 mm) Model MG - Accessories overview, float options (for all applications) Product & Dimensions Pressure Temp. long-gauge flex FLOATs 91. mm (.6 in.) dia. 8 mm (1.10 in.) dia. Magnet Offset Specific Gravity Material/ Type Weight Offset Part Number 0. SS No mm (. in.) C Magnet L 9. bar ( psi) No mm (1.7 in.) 0.6 Hastelloy C No 1-* (.98 in.) C L Magnet No mm (. in.) 7.9 bar (0 psi) Yes 0. SS 8 mm (1.1 in.) 10 mm (.11 in.) Yes 018-* 178 mm (7 in.) 8 mm (1.9 in.) dia. No 16-1* 0. SS 178 mm (7 in.) 17. bar (0 psi) No Yes 16-* No 16-* 0.7 Hastelloy C Yes 16-* 1. Be sure that the float specific gravity is at least 0.0 less than that of the measured liquid as a safety margin at ambient temperature.. For interface measurement: A minimum of 0.0 specific gravity differential is required between the upper and lower liquids.. When the magnet is not shown, the magnet is positioned at the center line of float.. Offset weight option: A weight is installed in the float to bias, or tilt, the float installed on the transmitter tube so that the float remains in contact with the transmitter tube at all times. The offset option is required for installations that must conform to PTB standards.. *Call the factory for specific lead times. Typical lead time exceeds lead time of the sensor. 6. Drawing contained in this document are for reference only. Contact the factory for engineering drawings. M-Series Model MR Liquid-Level Transmitter, Digital Output - Product Specification, 078 F 10
11 Nitrophyl product and interface float options 1. Floats and may be used with propane, butane, and liquefied petroleum gas. Precautions should be taken to ensure that no other contaminant s are present in these liquids, which may not be compatible with Nitrophyl.. When magnet is not shown, the magnet is positioned at the centerline of the float. Product & Dimensions Pressure Temp. Magnet Offset Specific Gravity Material/ Type Weight Offset Part Number Nitrophyl Product / Interface Floats 0.6 Nitrophyl/ Product No 998* Stainless cover 17. bar (0 psi) 10 C (0 F) Yes Stainless float post 168 mm (6.61 in.) C LMagnet 1 mm (.99 in.) Nitrophyl/ Interface No 999* 0 mm (1.19 in.) 1. mm I.D. (6.00 in.) dia. Nitrophyl base 11 M-Series Model MG Liquid-Level Transmitter, Digital Output - Product Specification, 078 F
12 Accessories overview Accessories Product descriptions MTS part no. M-Series PC Setup Software H100 LIQUID-LEVEL HT100 HAND HELD TERMINAL (DDA ONLY) M-Series Modbus setup software, shipped with the sensor, will allow the setup and calibration of M-Series digital sensors. The software communicates via RS-8 to RS- adapter. M-Series Modbus setup software, shipped with the sensor, will allow the setup and calibration of M-Series digital sensors RS-8 to RS- adapter 8007 M-Series Digital PC setup software (DDA) 60 The liquid-level HT100 is a convenient and cost-effective tool for supporting MTS Direct Digital Access (DDA) sensors, side tank indicators and tank moni tors in the field. The hand-held microprocessor-based unit performs all the operations necessary for setting up, troubleshooting and maintaining an MTS DDA tank gauging system. Using the HT100 allows users to program and per form diagnostics on-site, saving time and money. 19 magnet and weight assemblies Disposable RS-8 Surge protector, go to (part no. 8FPP) 70 Belden cable, -wire RS-8 cable, mm ( in.) 10 lb. pull for LDF long sensor and M-Series sensors mm ( in.) 1 mm ( in.) Standard 11 lb. weight for M-Series sensors ( in.) A 191 mm (7. in.) dia. 16 mm (6. in.) dia. 8 mm (. in.) mm (0.1 in.) 16 mm (0.6 in.) Low liftoff 11 lb. weight assembly Use with float part no. 998/ A Section A-A Label, A Sanitary FM APPROVED Part Number: 08-08, Revision F MTS, Level Plus and Temposonics, are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. All Temposonics sensors are covered by US patent number,,98. Additional patents are pending. Printed in USA. Copyright 008 MTS Systems Corporation. All Rights Reserved in all media. SENSORS UNITED STATES MTS Systems Corporation Sensors Division 001 Sheldon Drive Cary, NC 71 Tel: (800) Fax: (919) (800) sensorsinfo@mts.com GERMANY MTS Sensor Technologie GmbH & Co. KG Auf dem Schüffel 9 D - 81 Lüdenscheid Tel: +9 / 1 / Fax: +9 / 1 / info@mtssensor.de JAPAN Technology Corporation Ushikubo Bldg. 77 Aihara-cho, Machida-shi Tokyo , Japan Tel: +81 () 77 / 88 Fax: +81 () 77 / 16 info@mtssensor.co.jp
Torque Tube TB300 Digital Transmitters
Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional
More information780S Ultra High Purity Series
Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no seperate temperature or pressure inputs required Field adjustment of critical flow meter settings via on-board
More informationTwo-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 March, 2004 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: - CENELEC EEx ia IIC - Class I Div. I Gr. B, C, D (pending) Operates at
More informationDTG - LCD Digital Temperature Gauge USER MANUAL
DTG - LCD USER MANUAL Page 1 of 7 USERS GUIDE page 1. Description 3 2. Function 3 3. Safety Instruction 3 3.1. Safety Conventions 3 3.2. Proper Use 3 4. Installation 4 4.1. Unpacking 4 4.2. Storage 4 4.3.
More informationFor Multi-Parameter Meters see mvx
Design Features VORTEX IN-LINE FLOW METERS For Multi-Parameter Meters see m Principles of Operation n No moving parts to wear or fail. n Electronics can be remotely mounted up to 30.5 m (0 ft). n No fluid
More informationUltra High Purity Model 780S
Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no separate temperature or pressure inputs required Built-in flow conditioner which eliminates velocity-profile
More information9700 Transmitter Submersible hydrostatic level transmitter
Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-10
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well
More informationFeatures. Description
Features Fast response flow meter ideal for inert gas and liquid mass flow measurement applications Smart electronics permit field adjustment of critical flow meter settings Field validation of flow meter
More informationFor Multi-Parameter Meters see mvx
VORTEX IN-LINE FLOW METERS Design Features For Multi-Parameter Meters see mvx Principles of Operation VX No moving parts to wear or fail. Electronics can be remotely mounted up to 30.5 m (0 ft). No fluid
More information2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor
INDUSTRIAL INSTRUMENTS AND CONTROLS SPECIALIST Kent-Taylor 2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters Features Include Base accuracy : ±0.075% Span limits
More information3.0 Pressure Transmitter Selection
3.0 Pressure Transmitter Selection Each Tronic Line pressure transmitter has different features to meet specific performance, environmental, and price requirements. It is not possible to describe every
More informationFlow and Energy Measurement F-5400 THERMAL MASS FLOW METER
THERMAL MASS FLOW METER s Series Thermal Mass Flow Meters provide accurate and reliable flow measurement for natural gas, compressed air, and other industrial gas applications. Natural Gas Compressed Air
More informationanalytical bulk flow distance FLOW level pressure temperature industrial communication
analytical bulk flow distance level pressure temperature industrial communication isolv THERMAL MASS METER Measuring Principle Self-heated Sensor Reference Sensor isolv Thermal Mass Flow Meters have two
More informationSteel-Mass Model 640S
Smart Insertion Thermal Gas Mass Flow Meter Features Direct mass flow monitoring eliminates need for seperate temperature and pressure inputs Accuracy +/- 1% of reading plus 0.5% of full scale Patented
More informationType N-10, N-11 Hazardous Area Non-incendive Transmitters
Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial
More information7Flat-Trak Model 780S. Smart In-Line Thermal Gas Mass Flow Meter with Flow Conditioner. For information online...
Smart In-Line Thermal Gas Mass Flow Meter with Flow onditioner Features Direct mass flow monitoring eliminates need for seperate temperature and pressure inputs Built-in flow conditioner which eliminates
More informationAutocalibration Systems For In Situ Oxygen Analyzers
Product Data Sheet PDS 106-340AC SPS 4000, IMPS 4000, and MPS 3000 January, 1999 Autocalibration Systems For In Situ Oxygen Analyzers Cost-effective autocalibration systems for installations ranging from
More informationModbus Submersible Level Transducer
ISO-91:2 Certified Modbus Submersible Level Transducer KPSI Transducers Series 51 FEATURES! Level Ranges up to 23 ft (7 m) H 2 O! Accuracy of ±.1% Total Error Band! RS-485 Communication Interface with
More informationLevel transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationModel 601CV. Mass Flow Controller. Product Features:
Model 601CV Mass Flow Controller Porter s Model 601CV Series II Mass Flow Controller (MFCs) is designed for precise control of virtually all conventional process gases. The MFC consists of a thermal mass
More information200A Series ELECTRONIC LEVEL TRANSMITTER
MARINE - WATER AND PROCESS INDUSTRIES LIQUID LEVEL AND CONTENTS APPLICATIONS HYDROSTATIC OPERATION 200A Series ELECTRONIC LEVEL TRANSMITTER INTRINSICALLY SUBMERSIBLE - SCREWED MARINE SAFE FLANGED - HYGIENIC
More informationWL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination
WL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination Warning: Non-vented water level loggers may have readings with errors of up to 250mm due to barometric pressure changes.
More informationThe M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions
The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions Flow Meter with multiple functions for gases and liquids M3 The M-series Flow Meter, with its versatile and user-friendly
More information660 Multipoint Electronic Level Switch
660 Multipoint Electronic Level Switch General Instructions The Multipoint Electronic Level Switch is a level sensing device which reads process level by capacitance measurement. Capacitance varies according
More informationKDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
More informationAPG. Intrinsically Safe, Heavy Duty Pressure Transducer Series: PT-400
Intrinsically Safe, Heavy Duty Pressure Transducer Series: PT-400 C US The PT-400 offers high accuracy and reliability over a wide range of pressures. The small size, integrated electronics, wide operating
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationBUBBLER CONTROL SYSTEM
BUBBLER CONTROL SYSTEM Description: The LDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air
More informationOSAT Series. Intrinsically Safe Infrared Temperature Sensor Operator's Guide
OSAT Series Intrinsically Safe Infrared Temperature Sensor Operator's Guide Issue L Jan 2017 Introduction OSAT Series intrinsically safe non-contact infrared temperature sensors measure the temperature
More informationTwo-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 September, 2007 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: ATEX, Zone 1, EEx ia IIC T4 Class I, Div. I, Gr. A, B, C, D T4 Operates
More informationXMO2. Panametrics Smart Oxygen Analyzer. Applications. Features. bhge.com. An oxygen transmitter for use in:
XMO2 Panametrics Smart Oxygen Analyzer Applications An oxygen transmitter for use in: Inerting/blanketing liquid storage tanks Reactor feed gases Centrifuge gases Catalyst regeneration Solvent recovery
More informationED 701 Hygenic Pressure Transmitter
ED 701 Hygenic Pressure Transmitter Hygienic process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response time < 25 ms (Option
More informationSeries INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
More informationSeries INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN
INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II
More informationPrecision pressure sensor Basic version Model CPT6020
Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications
More informationBUBBLER CONTROL SYSTEM
BUBBLER CONTROL SYSTEM Description: The HDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air
More informationx act i Precision- Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor
Precision- Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationFTS SUBMERSIBLE PRESSURE TRANSMITTER USER S MANUAL
FTS SUBMERSIBLE PRESSURE TRANSMITTER USER S MANUAL TABLE OF CONTENTS PRODUCT OVERVIEW 2 I - USE AND CARE: 3 II - INSTALLATION: 5 III - GENERAL MAINTENANCE TIPS: 5 IV - APPENDIX: A-1 2-WIRE CURRENT LOOP
More informationKDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
More informationC-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
More informationDifferential Pressure Transmiter
Differential Pressure Transmiter Description The is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor;
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationL 100. Bubble-Tube Level System. Installation, Operation and Maintenance Instructions
L 100 Bubble-Tube Level System Installation, Operation and Maintenance Instructions Figure 1 Contents Section Description Page 1.0 Introduction 2 2.0 Specifications 3 3.0 Installation 3 4.0 Warranty 6
More informationSITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
More informationPressure Transmitter P41
SENSORS FOR AND BIOPHARMA. Product Information P41 Pressure Transmitter P41 Application/Specified usage Pressure measurement in pipes and tanks For process temperatures up to 250 C (428 F) with optional
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Description Intelligent pressure and level transmitters for all industries
More informationSimple Set. Pressure Independent Control Valves 2 Way 1/2-2
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control
More informationInstallation and Operation Manual
Installation and Operation Manual WIKA FLR-SBDF / BLR-SBDF Magnetic Level Transmitter (Please retain for future usage) Contact: Gayesco-WIKA USA, L.P. 229 Beltway Green Boulevard Pasadena, TX 77503 www.wika.com
More informationSDX Submersible Depth Transmitter User Manual
SDX Submersible Depth Transmitter User Manual July 2017 USER INFORMATION Stevens makes no warranty as to the information furnished in these instructions and the reader assumes all risk in the use thereof.
More informationPro-V Multivariable Flowmeter
Pro-V Multivariable Flowmeter Model M23 Insertion Meter M23-V flowmeter provides cost-effective volumetric flow monitoring solution for most liquids M23-VT incorporates temperature sensing to provide a
More informationADVANTAGES DESCRIPTION MECHANICAL FITTINGS AND DIMENSIONS
03304 Float Gauge: Level measurement Application: LNG tanks Level 03304 E 1 ADVANTAGES - High level accuracy - Local mechanical counter read out. - High reliability - Suitable for 12 and 8 still well.
More informationInstallation, operating and maintenance Instructions for Seemag bypass level indicator
Issue: S Date: 05-09-14 Type G35 General information The Seetru bypass magnetic level indicator, abbreviate SEEMAG, serves to show the filling level of fluids in tanks, basins, tubes etc. The Seemag operates
More informationL3 Pressure and Level transmitter
SENSORS FOR AND BIOPHARMA. Product Information L3 L3 Pressure and Level transmitter Range of applications Hydrostatic Level measurement in dynamic temperature environments Pressure measurement in pipes
More informationPro-V Multivariable Flowmeter Model M22 In-line Vortex
Pro-V Multivariable Flowmeter Model M22 In-line Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationUNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
More information2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
More informationLiquid level instruments BM 24 /BM 51
KROHNE 09/2001 7.02362.21.00 GR/PRINTO Liquid level instruments / Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationTEK-SUB 4800B. Submersible Level Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys LEVEL
Technology Solutions TEK-SUB 4800B Submersible Level Transmitter LEVEL Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Sub 4800B Submersible Level Transmitter
More informationSmart performance with innovative and ever-strong coil drive even under harsh working environments
Smart Valve Positioner SS2 inear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)
More informationRTX 1000H Series. Versatile Transmitters for a World of Pressure. GE Measurement & Control. Features
GE Measurement & Control RTX 1000H Series Versatile Transmitters for a World of Pressure GE Measurement & Control is renowned for the design and manufacture of compact and rugged high performance pressure
More informationPressure transmitter PASCAL Ci4
Pressure transmitter PASCAL Ci4 for general application,type Series CI4100 Features Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids High-resolution
More informationUltrasonic. 58 Overview VEGASON 60 VEGASON 61, 62, 63
Ultrasonic 58 Overview VEGASON 60 VEGASON 61, 62, 63 57 Overview VEGASON Area of application The ultrasonic sensors of the VEGASON series are suitable for non-contact level measurement of liquids and bulk
More informationP9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6
P9000 High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESCRIPTION The P9000 Series is a range of advanced,
More informationParametrable / Programmable Pressure Transmitter
Parametrable / Programmable Pressure Transmitter PTM/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available
More informationOnline data sheet FLOWSIC30 GAS FLOW METERS
Online data sheet A B C D E F H I J K L M N O P Q R S T Ordering information LTRASONIC GAS FLOW METER FOR CTION Type Part no. On request The exact device specifications and performance data of the product
More informationKTE6000 / KTU6000 Series OEM pressure transmitters for industrial media
FEATURES 50 mbar to 400 bar, 5 to 6000 psi gage or absolute pressure For many industrial gases and liquids 00, 0545, 05, 6 or 40 ma output Field interchangeable EMC according to EN 66-8 MEDIA COMPATIBILITY
More informationLVU2800 Series. Ultrasonic Level Transmitter
LVU2800 Series Ultrasonic Level Transmitter 2 of 23 INTRODUCTION / TABLE OF CONTENTS Step One The LVU2800 Series is a general purpose ultrasonic level transmitter that provides a loop powered 4 20 ma output.
More informationUBEC 1AT. AUTO TANK Fill System Installation, Operation, & Setup Instructions
Document Number: XE-ATA5PM-R1A UBEC 1AT AUTO TANK Fill System 08899155 Installation, Operation, & Setup Instructions Rev170906-EB-FRC PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM
More informationISO 9001/ Model SDT-420. Torque Tube, Displacement Type Level Transmitter
ISO 9001/14001 Model SDT-420 Torque Tube, Displacement Type Level Transmitter SDT-420 Introduction The SEOJIN INSTECH model SDT-420 Displacement Level Transmitter is one of the most advanced level instruments
More informationDepth/Level. Druck Submersible Pressure Sensors Product Guide. GE Sensing. Applications. Features
Features High accuracy Excellent reliability Robust construction Harsh media compatible High stability Low power/pulsed power operation Applications Bore hole monitoring River level Tank level Tide and
More informationSSL. Smart Valve Positioner.
Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration
More informationProgrammable Submersible Level Transmitters
Programmable Submersible Level Transmitters PTM/N/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available as
More informationElectropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765
Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from
More informationDesign Features. General Description
Model thermal Mass Flow Controllers are designed to indicate and control set flow rates of gases. The combines the characteristics and accuracy of conventional mass flow devices into a unique compact design
More informationBubble Tube Installations
Instruction MI 020-328 September 2013 Bubble Tube Installations For Liquid Level, Density, and Interface Level Measurements 2 Contents Introduction... 5 Abbreviations... 5 Principle of Operation... 5 Alternative
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition
Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationFeatures. Main Voltage: Vdc. Input Control Signal: 0-5 Vdc or 4-20 madc (Sourcing) Monitor Output Voltage: 0-5 Vdc or 4-20 madc (Sourcing)
1 X-Flow Mass Flow Controller Flow Range from 0.8 ml/min to 20 l/min Target Markets Laboratory and Process Instrumentation Pharma / Bio-Pharma Equipment Air Quality Monitoring Systems Furnace and Coatings
More informationUser s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] IM 01C25A00-12E
User s Manual EJX/EJA-E Series NEPSI Certification [Option code: /NF2, /NS21, /NS24 and /NS25] 12th Edition 1 1. Introduction Thank you for purchasing the DPharp electronic pressure transmitter. This manual
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More informationL (up to 25 m) Electronic part. working temp.: Ñ IP 66 / IP67. Mounting bracket ÐÑ. Sensor type. working temp.:
Smart level probe type APC-2000ALW/L Programmable zero shift, range and damping ratio 4...20 ma output signal + HART protocol Accuracy 0,16% Local display Intrinsic safety certificate (ATEX, IECEx) II
More informationIntelligent SUNTEX DC-5310(RS) Dissolved Oxygen Transmitter
Intelligent SUNTEX DC-5310(RS) Dissolved Oxygen Transmitter Overview C % ppm 4~20mA Analog Output ppb Power Supply 100~240 VAC mg/l Dimensions 96 x 96 x 132mm RS-485 Digital Output (for DC-5310-RS only)
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationMPM426W/436W Submersible Level Transmitter
/436W Submersible Level Transmitter Features Full sealed stainless steel construction for submersible part; sensor and amplifier circuit are all in the sealed housing; protection class IP68; Aluminum-alloy
More informationHigh-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements
More informationViatran s Sanitary Pressure and Level Measurement Family
s a n i t a r y p r e s s u r e a n d l e v e l m e a s u r e m e n t FOUR DECADES of PRESSURE AND LEVEL MEASUREMENT SOLUTIONS CLEANED UP. Viatran s Sanitary Pressure and Level Measurement Family Viatran
More informationSteel-Mass Model 640S
Immersible Thermal Gas Mass Flow Meter Direct mass flow monitoring eliminates need for separate temperature and pressure inputs Accuracy +/- 1% of reading plus 0.5% of full scale Patented Dry-Sense technology
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationMonitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
More informationMPM280 Piezoresistive OEM Pressure Sensor
MPM280 Piezoresistive OEM Pressure Sensor MPM280 Pressure Sensor (V1.2) Features Pressure range 0kPa~20kPa 70MPa; Gauge, absolute and sealed gauge; Constant current / Constant Voltages power supply; Isolated
More informationPowers Controls RC 195 Single Input Receiver-Controller
Document No. 155-119P25 RC 195-4 Powers Controls RC 195 Single Input Receiver-Controller Description The RC 195 Single lnput Receiver-Controller is a pneumatic instrument which receives one pneumatic input,
More informationPreferred Instruments Danbury, CT USA
Tank Level Sensor Model TG-EL-WF-xx Installation & Operation Instructions SDI-TG-EL-WF March 6, 2006 Preferred Instruments Danbury, CT USA www.preferredinstruments.com CONTENTS Installation Pg. 2 Calibration
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationDigital Mass Flow Meters and Controllers for Gases
Digital Mass Flow Meters and Controllers for Gases A Bronkhorst company. M+W Instruments. Your specialists for inline measurement WORTH KNOWING M+W Instruments was founded in 1988 and has always specialised
More informationWATER MADE EASY MARINE ENERGY MUNICIPAL INDUSTRIAL
Capital Controls Series 71V3000 The Series 71V3000 electrically-heated vaporizer automatically vaporizes and superheats liquid chlorine, sulfur dioxide or ammonia at a rate controlled by the gas feed system.
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
More informationMOYNO FLUID DETECTION CONTROL SERVICE MANUAL. Section: ACCESSORIES. Page: 1 of 8 Date: May 1, 1998 GENERAL
MOYNO Section: ACCESSORIES Page: 1 of 8 Date: May 1, 1998 SERVICE MANUAL FLUID DETECTION CONTROL GENERAL The Moyno Fluid Detection Control prevents unnecessary loss of production time or repair costs to
More informationDifferential pressure
Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor
More informationMPM416W/WK/WRK Submersible Level Transmitter
/WK/WRK Submersible Level Transmitter /WK/WRK Submersible Level Transmitter Features Separate construction; full sealed stainless steel construction for submersible/inserted sensor; aluminum-alloy electric
More information7000 Series OPTIMASS Mass Flowmeters. Titanium Hastelloy Stainless Steel
KROHNE 04/2003 7.02445.71.00 GR 7000 Series OPTIMASS Mass Flowmeters with single straight measuring tube Titanium Hastelloy Stainless Steel One tube no limits No limits with tube material No limits with
More information