GOLD SUBSTRATES - ANNEALED AU 2.0X1.6 CM ON MICA 2.4X1.6 CM - PACKAGE OF 5

Transcription

1 SAFETY DATA SHEET SECTION 1 Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Product name GOLD SUBSTRATES - ANNEALED AU 2.0X1.6 CM ON MICA 2.4X1.6 CM - PACKAGE OF 5 Part No. N9806B-FG, N9805A-FG, N9805B-FGN, 9806A-FG, N9807A-FG, N9807B-FG 1.2 Relevant identified uses of the substance or mixture and uses advised against Analytical chemistry. 25MM OD 52MM HT x 5 Identified uses 1.3 Details of the supplier of the safety data sheet Keysight Technologies, Inc Fountaingrove Parkway Santa Rosa, California address of person responsible for this SDS James_Powell@Keysight.com 1.4 Emergency telephone number Emergency telephone number (with hours of operation) (707) Monday - Friday SECTION 2 Hazards identification 2.1 Classification of the substance or mixture Product definition Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] H373 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Ingredients of unknown toxicity Ingredients of unknown ecotoxicity Classification according to Directive 1999/45/EC [DPD] The product is not classified as dangerous according to Directive 1999/45/EC and its amendments. Classification Not classified. See Section 16 for the full text of the R phrases or H statements declared above. See Section 11 for more detailed information on health effects and symptoms. 2.2 Label elements Hazard pictograms Percentage of the mixture consisting of ingredient(s) of unknown toxicity 100% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment 100% Signal word Hazard statements Precautionary statements Prevention Warning H373 - May cause damage to organs through prolonged or repeated exposure. P260 - Do not breathe dust. 01/08/2014 1/9

2 SECTION 2 Hazards identification Response Storage Disposal Hazardous ingredients Supplemental label elements Special packaging requirements Tactile warning of danger P314 - Get medical attention if you feel unwell. Not applicable. P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations. Mica-group minerals Not applicable. Not applicable. 2.3 Other hazards Other hazards which do not result in classification None known. SECTION 3 Composition/information on ingredients Substance/mixture Product/ingredient name Mixture Identifiers Classification % 67/548/EEC Regulation (EC) No. Type 1272/2008 [CLP] Mica-group minerals CAS >=90 Not classified. STOT RE 2, H373 (lungs) (inhalation) See Section 16 for the full text of the H statements declared above. [1] There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Type [1] Substance classified with a health or environmental hazard [2] Substance with a workplace exposure limit [3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII [4] Substance meets the criteria for vpvb according to Regulation (EC) No. 1907/2006, Annex XIII [5] Substance of equivalent concern Occupational exposure limits, if available, are listed in Section 8. SECTION 4 First aid measures 4.1 Description of first aid measures Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention following exposure or if feeling unwell. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention following exposure or if feeling unwell. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention following exposure or if feeling unwell. Wash clothing before reuse. Clean shoes thoroughly before reuse. 01/08/2014 2/9

3 SECTION 4 First aid measures Ingestion Protection of first-aiders Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention following exposure or if feeling unwell. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. 4.2 Most important symptoms and effects, both acute and delayed Potential acute health effects Ingestion Over-exposure signs/symptoms No specific data. No specific data. No specific data. Ingestion No specific data. 4.3 Indication of any immediate medical attention and special treatment needed Notes to physician Specific treatments SECTION 5 Firefighting measures Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. No specific treatment. 5.1 Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Use an extinguishing agent suitable for the surrounding fire. None known. 5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture Hazardous combustion products No specific fire or explosion hazard. Decomposition products may include the following materials metal oxide/oxides 5.3 Advice for firefighters Special precautions for fire-fighters Special protective equipment for firefighters Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves) conforming to European standard EN 469 will provide a basic level of protection for chemical incidents. 01/08/2014 3/9

4 SECTION 6 Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures For non-emergency personnel For emergency responders No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel". 6.2 Environmental precautions Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). 6.3 Methods and materials for containment and cleaning up Methods for cleaning up Move containers from spill area. Avoid dust generation. Do not dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place in a closed, labeled waste container. Dispose of via a licensed waste disposal contractor. 6.4 Reference to other sections SECTION 7 Handling and storage 7.1 Precautions for safe handling Protective measures Advice on general occupational hygiene See Section 1 for emergency contact information. See Section 8 for information on appropriate personal protective equipment. See Section 13 for additional waste treatment information. Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures. 7.2 Conditions for safe storage, including any incompatibilities Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination. 7.3 Specific end use(s) Recommendations Industrial sector specific solutions Industrial applications, Professional applications. Not applicable. SECTION 8 Exposure controls/personal protection 8.1 Control parameters Occupational exposure limits No exposure limit value known. Recommended monitoring procedures If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to monitoring standards, such as the following European Standard EN 689 (Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy) European Standard EN (Workplace 01/08/2014 4/9

5 SECTION 8 Exposure controls/personal protection Derived effect levels No DNELs available. atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents) European Standard EN 482 (Workplace atmospheres - General requirements for the performance of procedures for the measurement of chemical agents) Reference to national guidance documents for methods for the determination of hazardous substances will also be required. Predicted effect concentrations No PNECs available. 8.2 Exposure controls Appropriate engineering controls Individual protection measures Hygiene measures Eye/face protection Skin protection Hand protection Body protection Other skin protection Respiratory protection Environmental exposure controls If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection safety glasses with sideshields. Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. SECTION 9 Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance Physical state Colour Odour Odour threshold ph Melting point/freezing point Solid. 01/08/2014 5/9

6 SECTION 9 Physical and chemical properties Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) Upper/lower flammability or explosive limits Vapour pressure Vapour density Relative density Solubility(ies) Partition coefficient n- octanol/water Auto-ignition temperature Decomposition temperature Viscosity Explosive properties 9.2 Other information No additional information. SECTION 10 Stability and reactivity 10.1 Reactivity No specific test data related to reactivity available for this product or its ingredients Chemical stability The product is stable Possibility of hazardous reactions Under normal conditions of storage and use, hazardous reactions will not occur Conditions to avoid No specific data Incompatible materials Reactive or incompatible with the following materials oxidizing materials Hazardous decomposition products SECTION 11 Toxicological information 11.1 Information on toxicological effects Acute toxicity Acute toxicity estimates Irritation/Corrosion Conclusion/Summary Sensitiser Conclusion/Summary Under normal conditions of storage and use, hazardous decomposition products should not be produced. Chronic toxicity / Carcinogenicity / Mutagenicity / Teratogenicity / Reproductive toxicity Specific target organ toxicity (single exposure) 01/08/2014 6/9

7 SECTION 11 Toxicological information Specific target organ toxicity (repeated exposure) Aspiration hazard Product/ingredient name Category Route of exposure Mica-group minerals Category 2 lungs Target organs Information on the likely routes of exposure Routes of entry anticipated Oral, Dermal,. Potential acute health effects Ingestion Potential chronic health effects General Carcinogenicity Mutagenicity Teratogenicity Developmental effects Fertility effects Symptoms related to the physical, chemical and toxicological characteristics Ingestion No specific data. No specific data. No specific data. No specific data. Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate effects Potential delayed effects Long term exposure Potential immediate effects Potential delayed effects Other information May cause damage to organs through prolonged or repeated exposure. SECTION 12 Ecological information 12.1 Toxicity Conclusion/Summary 12.2 Persistence and degradability Conclusion/Summary 12.3 Bioaccumulative potential 12.4 Mobility in soil 01/08/2014 7/9

8 SECTION 12 Ecological information Soil/water partition coefficient (KOC) Mobility 12.5 Results of PBT and vpvb assessment PBT Not applicable. vpvb Not applicable Other adverse effects SECTION 13 Disposal considerations 13.1 Waste treatment methods Product Methods of disposal The generation of waste should be avoided or minimised wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Hazardous waste The classification of the product may meet the criteria for a hazardous waste. Packaging Methods of disposal Special precautions SECTION 14 Transport information The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Regulatory information ADR/RID / IMDG / IATA Not regulated Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code SECTION 15 Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorisation Substances of very high concern None of the components are listed. Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles Not applicable. Other EU regulations Europe inventory Black List Chemicals Priority List Chemicals Not determined. Not listed Not listed 01/08/2014 8/9

9 SECTION 15 Regulatory information Integrated pollution prevention and control list (IPPC) - Air Integrated pollution prevention and control list (IPPC) - Water Listed Listed 15.2 Chemical Safety Assessment SECTION 16 Other information This product contains substances for which Chemical Safety Assessments might still be required. Indicates information that has changed from previously issued version. Abbreviations and acronyms ATE = Acute Toxicity Estimate CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008] DNEL = Derived No Effect Level EUH statement = CLP-specific Hazard statement PNEC = Predicted No Effect Concentration RRN = REACH Registration Number Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] STOT RE 2, H373 Classification Calculation method Justification Full text of abbreviated H statements Full text of classifications [CLP/GHS] Date of issue/ Date of Date of previous issue Version H373 H373 (lungs) (inhalation) STOT RE 2, H373 STOT RE 2, H373 (lungs) (inhalation) 01/08/ /10/ May cause damage to organs through prolonged or repeated exposure. May cause damage to organs through prolonged or repeated exposure if inhaled. (lungs) SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (lungs) (inhalation) - Category 2 Notice to reader Disclaimer The information contained in this document is based on Keysight s state of knowledge at the time of preparation. No warranty as to its accurateness, completeness or suitability for a particular purpose is expressed or implied. 01/08/2014 9/9