E.2 Series. High efficiency circulator. Technical overview
|
|
|
- Morgan Walker
- 5 years ago
- Views:
Transcription
1 E.2 Series High efficiency Technical File No:.165 Date: june 05, 2017 Supersedes:.165 Date: october 08, 2015
2
3 contents Motor data 4 Technical data 4 Materials of construction 4 Dimensions and weights 5 Dimension drawings 5 Cross reference table 6 Performance curves 8
4 technical E.2 Series high efficiency 4 motor data model speed full load amp draw (a) nominal power rpm 120 v 208 v 240 v 277 v hp (W) e T (125) e T (125) e T (125) e T (125) e T (125) e Q (298) e T (125) e Q (298) e Q (298) e T (125) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) e Q (298) note: Speed in rpm, nominal power in hp (W) and full load amp draw in amps All motors are two pole, single phase. technical data model max. flow in USgpm (L/s) max. head in ft. (m) e (2.4) 26.0 (7.9) e (2.4) 34.0 (.4) e (2.4) 42.4 (12.9) e (2.7) 28.0 (8.5) e (2.8) 31.9 (9.7) e (3.1) 56.0 (17.0) e (3.4) 19.7 (6.0) e (3.3) 61.0 (18.6) e (3.7) 24.5 (7.5) e (4.3) 16.8 (5.1) e (4.1) 27.0 (8.2) e (5.7) 23.0 (7.0) e (5.7) 26.5 (8.1) e (5.6) 39.5 (12.0) e (5.2) 35.5 (.8) e (6.6) 30.0 (9.1) e (7.4) 17.0 (5.2) e (8.1) 19.0 (5.8) e (8.2) 22.0 (6.7) e (9.0) 26.0 (7.9) Max. fluid temperature: 230 f (1 c) Max. ambient temperature: 122 f (50 c) Max. working pressure: 150 psi (34 kpa) MATERIALS OF CONSTRUCTION Pump body: Cast iron or lead free bronze** Impeller: 30% glass-filled Noryl Face plate and shaft: Stainless steel Seal: Silicon carbide enviroseal Gasket: epdm Bearings: Permanently lubricated stainless steel ** Contains less than 0.25% lead, weighted average.
5 E.2 Series high efficiency technical 5 dimensions and weights model a b c d e f connection shipping weight cast iron lead free bronze e7.2/e7.2b 7. (180) 6.40 (164) 5.50 (140) 3.80 (97) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 13.1 (5.94) 13.3 (6.03) e8.2/e8.2b 7. (180) 6.40 (164) 5.50 (140) 3.80 (97) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 13.1 (5.94) 13.3 (6.03) e9.2/e9.2b 7. (180) 6.40 (164) 5.50 (140) 3.80 (97) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 13.1 (5.94) 13.3 (6.03) e.2/e.2b 7.50 (191) 8.50 (215) 5.60 (142) 3.80 (97) 3.40 (86) 4.20 (7) 1.5" diameter 2 bolt flanges 15.1 (6.85) 15.1 (6.85) e11.2/e11.2b 7.50 (191) 8.50 (215) 5.60 (142) 3.80 (97) 3.40 (86) 4.20 (7) 1.5" diameter 2 bolt flanges 15.1 (6.85) 15.1 (6.85) e12.2/e12.2b 9.30 (235) 6.40 (164) 7.80 (197) 4.00 (1) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 17.8 (8.07) 18.4 (8.35) e13.2/e13.2b 7.50 (191) 8.50 (215) 5.60 (142) 3.80 (97) 3.40 (86) 4.20 (7) 1.5" diameter 2 bolt flanges 15.1 (6.85) 14.8 (6.71) e14.2/e14.2b 9.30 (235) 6.40 (164) 7.80 (197) 4.00 (1) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 17.8 (8.07) 18.4 (8.35) e15.2/e15.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 20.9 (9.48) 21.2 (9.62) e16.2/e16.2b 8.40 (212) 8.50 (215) 5.80 (147) 3.80 (97) 2.90 (73) 5.20 (131) 2" diameter 4 bolt flanges 18.8 (8.53) 20.9 (9.48) e17.2/e17.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.20 (81) 4.20 (7) 1.25" diameter 2 bolt flanges 20.9 (9.48) 21.2 (9.62) e19.2/e19.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.40 (81) 4.20 (7) 1.5" diameter 2 bolt flanges 20.7 (9.39) 20.9 (9.48) e21.2/e21.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.40 (81) 4.20 (7) 1.5" diameter 2 bolt flanges 20.7 (9.39) 20.9 (9.48) e22.2/e22.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.40 (81) 4.20 (7) 1.5" diameter 2 bolt flanges 20.7 (9.39) 20.9 (9.48) e23.2/e23.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.40 (81) 4.20 (7) 1.5" diameter 2 bolt flanges 20.7 (9.39) 20.9 (9.48) e24.2/e24.2b.30 (261) 8.50 (215) 8.00 (202) 4.00 (1) 3.40 (81) 4.20 (7) 1.5" diameter 2 bolt flanges 20.7 (9.39) 20.9 (9.48) e28.2/e28.2b (286) 8.50 (215) 8.35 (2) 4.00 (1) 3.50 (89) 6.00 (152) 3" diameter 4 bolt flanges e29.2/e29.2b (286) 8.50 (215) 8.35 (2) 4.00 (1) 3.50 (89) 6.00 (152) 3" diameter 4 bolt flanges e30.2/e30.2b e33.2/e33.2b 26.8 (12.16) 26.8 (12.16) 29.2 (13.24) 29.2 (13.24).90 (276) 8.50 (215) 8.30 (2) 4.00 (1) 2.90 (73) 5.20 (131) 2" diameter 4 bolt flanges 17.2 (7.80) 25.7 (11.66) (286) 8.50 (215) 8.30 (2) 4.00 (1) 3.50 (89) 6.00 (152) 3" diameter 4 bolt flanges 26.8 (12.16) 29.2 (13.24).90 (276) 8.50 (215) 8.30 (2) 4.00 (1) 2.90 (73) 5.20 (131) 2" diameter 4 bolt flanges 17.2 (7.80) 25.7 (11.66) (286) 8.50 (215) 8.30 (2) 4.00 (1) 3.50 (89) 6.00 (152) 3" diameter 4 bolt flanges 26.8 (12.16) 29.2 (13.24) a c d b e f
6 technical E.2 Series high efficiency 6 cross reference table models armstrong b&g grundfos taco e.2 series connection 3-piece old 60 new 60 pl wet rotor 3-piece wet rotor 1400 series e7.2b flanged, 2 bolt 1¼" pl30b up 26 96b 0011 e8.2b flanged, 2 bolt 1¼" up 26 99b 0013 e9.2b flanged, 2 bolt 1¼" pl36b up b e.2b flanged, 2 bolt 1½" hv up 43 75b e11.2b flanged, 2 bolt 1½" pl45b e12.2b flanged, 2 bolt 1¼" pl55b e13.2b flanged, 2 bolt 1½" pl50b up 43 44b e14.2b flanged, 2 bolt 1¼" closed systems open systems e15.2b flanged, 2 bolt 1¼" 601b e16.2b flanged, 4 bolt 2" 2 pl75b ups 40-40b e17.2b flanged, 2 bolt 1¼" 60 11b 602b ups 32-80b e19.2b flanged, 2 bolt 1½" 1600 e21.2b flanged, 2 bolt 1½" 605b 16 e22.2b flanged, 2 bolt 1½" 622b ups b 1614 e23.2b flanged, 2 bolt 1½" 60 11b ups 43-1b 1612 e24.2b flanged, 2 bolt 1½" 60 15b 606b ups 40-80/2b e28.2b flanged, 4 bolt 3" 2½ab/ld3ab 60 13b 121, 122 e29.2b flanged, 4 bolt 3" hd3ab 131 e30.2b flanged, 4 bolt 2" pl130b 2" 1630 e30.2b flanged, 4 bolt 3" pd 35ab pl130b 3" 132 e33.2b flanged, 4 bolt 2" 60 14b 615b ups 50-80/2b e33.2b flanged, 4 bolt 3" 133 e7.2 flanged, 2 bolt 1¼" pl30 up 26-96f 0011 e8.2 flanged, 2 bolt 1¼" up 26-96f 0013 e9.2 flanged, 2 bolt 1¼" pl36 up f e.2 flanged, 2 bolt 1½" hv up 43-75f 112 e11.2 flanged, 2 bolt 1½" pl e12.2 flanged, 2 bolt 1¼" pl e13.2 flanged, 2 bolt 1½" pl50 up 43-44f e14.2 flanged, 2 bolt 1¼" e15.2 flanged, 2 bolt 1¼" e16.2 flanged, 4 bolt 2" 2 pl75 ups e17.2 flanged, 2 bolt 1¼" ups e19.2 flanged, 2 bolt 1½" up e21.2 flanged, 2 bolt 1½" 16 e22.2 flanged, 2 bolt 1½" ups e23.2 flanged, 2 bolt 1½" up e24.2 flanged, 2 bolt 1½" ups 40-80/2 e24.2 flanged, 2 bolt 1½" ups 40-80/2 e28.2 flanged, 4 bolt 3" 2½/ld3 121, 122 e29.2 flanged, 4 bolt 3" hd3 131 e30.2 flanged, 4 bolt 2" pl130 2" 1630 e30.2 flanged, 4 bolt 3" pd 35 pl130 2" 132 e30.2 flanged, 4 bolt 3" pd 35 pl130 2" 132 e33.2 flanged, 4 bolt 2" ups 50-80/ e33.2 flanged, 4 bolt 2" ups 50-80/ e33.2 flanged, 4 bolt 3" 133
7 E.2 Series high efficiency technical 7 models open systems closed systems port to port length (inches) e.2 series armstrong b&g grundfos taco s & h e7.2b 6W" 6W" 6½" 6½" e8.2b 6W" 6½" 6½" e9.2b 6W" 6W" 6½" 6W" e.2b 8½" 8½" 8½" 8½" e11.2b 8½" 8½" 6½" e12.2b 6X 6W" 6W" e13.2b 8½" 8½" 8½" e14.2b 6X e15.2b 8½" 11" 11½" e16.2b 8½" 8 ½" 13½" 8½" 8½" e17.2b 8½" 11" 11" 11½" e19.2b 8½" 13½" e21.2b 8½" 11" ¼" e22.2b 8½" 13½" 11" 13½" e23.2b 8½" 13½" 8½" 13½" 13½" e24.2b 8½" 11½" / 11" 13½" 11½" e28.2b 8½" " 11V" " e29.2b 8½" " 13X" " e30.2b 8½" 8½" 13½" e30.2b 8½" 12" / 8½" 13X" 12" e33.2b 8½" 11½" 13½" 14" 8½" 11½" e33.2b 8½" 13X" e7.2 6W" 6W" 6½" 6½" e8.2 6W" 6½" 6½" e9.2 6W" 6W" 6½" 6W" e.2 8½" 8½" 8½" 8½" e11.2 8½" 8½" 8½" e12.2 6X" 6W" 6W" e13.2 8½" 8½" 8½" e14.2 6X" e15.2 8½" 11" 11½" e16.2 8½" 8½" 13½" 8½" 8½" e17.2 8½" 11" 11" 11½" e19.2 8½" 11½" 8½" ¼" 13½" e21.2 8½" 11" ¼" e22.2 8½" 13½" 11" 13½" e23.2 8½" 13½" 8½" 13½" 13½" e24.2 8½" 11½" 13½" 11½" e24.2 8½" 11" 13½" 11½" e28.2 8½" " 11V" " e29.2 8½" " 13X" " e30.2 8½" 8½" 13½" e30.2 8½" 12" 13X" 12" e30.2 8½" 8½" 13X" 12" e33.2 8½" 11½" 11½" 8½" 11½" e33.2 8½" 13½" 11½" 8½" 11½" e33.2 8½" 13X"
8 technical E.2 Series high efficiency 8 performance curves flow L/s total head feet flow USgpm total head m Circled numbers denote e.2 series model number (performance guaranteed only at operating point indicated). flow L/s toronto buffalo total head feet total head m birmingham +44 (0) flow USgpm manchester +44 (0) bangalore +91 (0) shanghai são paulo armstrong fluid technology established armstrongfluidtechnology.com
DESIGN ENVELOPE 6800 G 1 DUTY PUMP
DESIGN ENVELOPE 68 G 1 DUTY PUMP AND 1 STANDBY, DOMESTIC WATER BOOSTER WIT STANDBY N122s N192s SUBMITTAL File No: 1.615 Date: june 27, 217 Supersedes: new Date: new Job: Representative: Engineer: Contractor:
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
T Y P E V S A B M S E W A G E P U M P
Pe r fo r m a n ce C h a r t s 11 1 D R Y P I T S B U L L E T I N 2 3 9 8 7 6 5 4 3 2 1 12 11 1 / 4 1 1 / 2 9 3 / 4 9 5% 3 HP 5 HP 7 1/2 HP 1 HP 76% 5% C u r v e P a g e V S A B M - 4 1 1 5 R P M M O D
50Hz. water solutions. O SerieS DGO DRO
Hz water solutions O SerieS DGO DRO D a t a b o o k l e t EN water solutions O SerieS DGO DRO Hz D a t a b o o k l e t O SERIES O Series General characteristics AISI stainless steel lifting and carrying
KSB Delta Compact Type Series Booklet
Pressure Booster System KSB Delta Compact Type Series Booklet Legal information/copyright Type Series Booklet KSB Delta Compact All rights reserved. The contents provided herein must neither be distributed,
KSB Delta Compact Type Series Booklet
Pressure Booster System KSB Delta Compact Type Series Booklet Legal information/copyright Type Series Booklet KSB Delta Compact All rights reserved. The contents provided herein must neither be distributed,
TPR Series. Vertical Multistage Centrifugal Pumps. 60Hz
TPR Series Vertical Multistage Centrifugal Pumps z Contents General Data Performance Range Product Range Applications Pump Motor Operating Conditions TPR Materials TPR(S)(N) Materials Type Key Operating
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302
CONTENTS. Page - SPECIFICATIONS 200 SPECIFICATION 200 SELECTION CHART PFC 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 204 PERFORMANCE CURVE 3 205 PERFORMANCE CURVE
Seated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange
Data sheet Seated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange Description VL 2 VL 3 VL 2 and VL 3 valves provide a quality, cost effective solution for most water and chilled applications.
Etanorm V Type Series Booklet
Vertical Low-pressure Pump Etanorm V Type Series Booklet Legal information/copyright Type Series Booklet Etanorm V All rights reserved. The contents provided herein must neither be distributed, copied,
DEEP WELL SUBMERSIBLE PUMPS. An ISO 9001 & Company
C.R.I. PUMPS DEEP WELL SUBMERSIBLE PUMPS EVERGREEN SERIES - 5Hz An ISO 91 & 141 Company Submersible Pumps C.R.I. Submersible Pumps are the products of the expertise gained from over four decades of experience,
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.
Zenit. Blue Professional Series. Submersible Electric Pumps.
Zenit Blue Professional Series Submersible Electric Pumps 1 7 1 www.zenitpumps.com.au A range of submersible pump models innovatively designed and manufactured for industrial, heavy duty use. Meeting the
Industrial TE-5.5-MD-CK. Applications. Features. Construction
Industrial TE-5.5-MD-CK Applications Circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible
Lowara 1300 Series: Pure performance SUBMERSIBILE PUMP RANGE (MENA REGION)
Lowara 13 Series: Pure performance SUMRSIIL PUMP RN (MN RION) PITIS UP TO H UP TO POWR UP TO 1,77 m³/h 74 m 5 kw The Lowara 13 series is a submersible pump line that delivers pure performance at outstanding
Simple Set Max. Pressure Independent Control Valves 2 Way 2-1/ /09/18
The Bray Simple Set Max is a flanged pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SSM Series combines high rangeability
SIHI LPH-X - Liquid Ring Compressors
- Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a
2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
OPERATION, INSTALLATION, & MAINTENANCE MANUAL. for. Aircon Flex-air AN Airlocks
OPERATION, INSTALLATION, & MAINTENANCE MANUAL for Aircon Flex-air AN Airlocks Aircon Corporation P.O. Box 80446 2873 Chelsea Avenue Memphis, TN 38108-0446 Telephone: (901) 452-0230 FAX: (901) 452-0750
Installation Instructions
Installation Instructions Durametallic SLM-6000, SLM-6100 Self contained cartridge medium duty slurry seal Experience In Motion 1 Cartridge Installation Instructions The following instruction manual is
Two-port seat valves
4 345 Two-port seat valves with flange, PN16 VVF45... Two-port seat valves with flange, PN16 Spheroidal cast iron GGG-40 DN50...150 mm k vs 19...300 m 3 /h Stroke 20 or 40 mm Can be equipped with actuators
Installation Instructions
Installation Instructions TM Five Star Seal 80 Series Dual, Cartridge Mounted, Flexible Stator Pusher Seal Designed for General Service Applications 86 and 87 Experience In Motion Description The 86/87
2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
Two-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
Pressure Independent Control Series
Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single
TYPE 3710 CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring/ Retaining Ring C Mating Ring/ Clamp Ring D Mating Ring Adapter E Primary Ring F Primary Ring/ Retaining Ring G Finger Springs H Spring Retainer I Gland O-ring J Flat Gasket
Models 106-RF / 206-RF Rate of Flow Control Valve
Rate of Valve KEY FEATURES Accurately limits low to a pre-set maximum Easily adjustable low limit Paddle-style oriice plate included Optional oriice plate housing 106-RF Globe Product Overview The 106-RF
Remotely-installed Hydraulic Module
Remotely-installed Hydraulic Module HDM 1.1-2.2 Single or twin pump ACC-PRC001E-GB Table of Contents Application Considerations Unit sizing...4 Unit placement... 4 Minimum water volume... 4 Selection Procedure...5
VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
On-Off switch. Selectable manual control for commissioning. Remote start input for control via an irrigation controller, or external sensor.
SPEEDMAN VARIABLE SPEED PUMP SET VARIABLE SPEED PUMP SET PRODUCT DESCRIPTION Variable speed / constant pressure system consisting of a Davey VM vertical multistage pump with Speedman controller, VSD unit,
OHIO GEAR REDUCERS DESIGN FEATURES
REDUCERS Cast Iron NEMA C Flange with machined fits for precision alignment for motor and bearings. Seal Guard on quill-input styles protects input seals from damage during motor installation. Oversized
STAINLESS STEEL GRAND SERIES
STAINLE STEEL GRAND SERIES STAINLE STEEL GRAND SERIES DEEPWELL SUBMERSIBLE PUMPS STAINLE STEEL - GRAND SERIES C.R.I. Always equips itself in advance to face the exponentially growing technological challenges
CAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
Required Indoor Draft Hood. Optional Outdoor Vent Cap
Pump-Mounted Water Heaters B4 - Copper Brute Water Heater Convertible Sizes 175,000-399,000 BTU/hr Indoor/Outdoor Sizes 500,000-1,825,000 BTU/hr Up to 82% Thermal Efficiency The unit will be designed and
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
60HZ XIANDAI PUMP. CDL/CDLF Vertical Multistage Pump ZHEJIANG XIANDAI PUMP CO.,LTD. ZHEJIANG XIANDAI PUMP CO.,LTD.
TECNICAL DATA INCLUDED IN TIS BROCURE MAY BE CANGE FROM TIME TO TIME DUE TO TE PRODUCT IMPROVEMENTS UNDERTAKES BY TE MANUFACTURER. TE COMPANY RESERVES TE UNCONDITIONAL RIGTS TO IMPLEMENT SUC CANGES WITOUT
2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
Берг АБ Тел. (495) , факс (495) Turning Ideas Into Engineered Solutions KAYDON RING & SEAL, INC.
Turning Ideas Into Engineered Solutions RING & SEAL, INC. K-CBS Series Circumferential Barrier Seals Kaydon s high performance circumferential barrier seals back up DGS systems with performance & economy.
WaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
PVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
Need the part number for an impeller, seal, gasket, or motor? It s all here.
Check here for parts questions Flexible Impeller Reference Guide Service Parts & Kits Service & Warranty Information 92 Need the part number for an impeller, seal, gasket, or motor? It s all here. Highlights:
CURVES S-96C. Domestic Pump Series C35 and C17 Styles PF and PVF Close Coupled Centrifugal
CURVES Domestic Pump Series C35 and C17 Styles PF and PVF Close Coupled Centrifugal Pump Construction: Cast iron head & case, bronze fitted. TABLE OF CONTENTS PUMPS MODEL DISCHARGE SUCTION* MAX. IMPELLER
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressor Systems Engineered-to-Order Liquid Ring Compressor Systems Unmatched experience Nash liquid ring compressors are
THIS DOCUMENT SHOULD STAY WITH THE PUMP UNIT AT ALL TIMES!
VERDERMAG Global PC 160L/M/H Maintenance Manual THIS DOCUMENT SHOULD STAY WITH THE PUMP UNIT AT ALL TIMES! TO BE READ IN CONJUNCTION WITH MAINTENACE MANUAL Page 1 of 16 Index 1.0 DOCUMENTATION 1.1 Type
3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
TYPE 2800E EXTERNALLY MOUNTED, GAS LUBRICATED, NON-CONTACTING, DOUBLE CARTRIDGE SEAL
A Seat/Mating Ring B Face/Primary Ring (inboard) C Spring D Face/Primary Ring (outboard) E O-Ring F Drive Collar G Setting Ring H Sleeve TYPE 2800E B A D C H E Spiral Groove Technology G F Product Description
InnovDos Foam proportioning system
InnovDos Lorrie 9 NL - 1724 BL Oudkarspel T: +31 88 9112 112 F: +31 88 9112 119 info@innovfoam.com www.innovfoam.com 1 1. General Information System Composition The InnovDos is made up of two main components
InnoVfoam B.V. InnovDos Foam Proportioning System
1724 BL Oudkarspel F. +31 (0)88 9112 119 info@innovfoam.com 1 1. GENERAL INFORMATION SYSTEM COMPOSITION The InnovDos system is made up of two main components (see flow schedule on page 4) that can be integrated
Seated valves VRB 3, VRG 3
Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations
Liquid ring compressor
Liquid ring compressor KLH 47005, KLH 47105 Compression pressures: Suction volume flow: 2 to 11 bar 56 to 65 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors of
Bell & Gossett ESP-Systemwize Pump Selections
Bell & Gossett ESP-Systemwize Pump Selections Monday Morning Minutes by Norm Hall, May 14, 2018 Monday,May 14, 2018 ESP-Systemwize is a powerful tool provided to the industry by Bell & Gossett. As an engineer
opti-visor tm Ultra-efficient chiller plant automation Sequence of operation File No: Date: december 17, 2015 Supersedes: new Date: new
Ultra-efficient chiller plant automation Sequence of operation File No: 90.897 Date: december 17, 2015 Supersedes: new Date: new 2 variable primary chilled water operation general requirements All Sequencing
WELCOME to CAUx Local India 2018
WELCOME to CAUx Local India 2018 Flange Design In Detail Prepared by Sachin Pol and Fauzan Badiwale Some Typical Flange Images 3 Some Typical Gasket Images 4 Flange Design As Per ASME Sec.VIII Div.1 Mandatory
HYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
HDX HDAR HDXP HDBT HDPV HDSE
HD S E R I E S The Meyer Heavy-Duty Series airlock valves provide maximum versatility in the most severe applications. Each model offers an engineered cost effective solution to the customers needs. These
Precision Rotary Airlocks and Diverter Valves
Precision Rotary Airlocks and Diverter Valves Utilizing over 40 Years of Mac Process Bulk Material Conveying Technology Airlocks and Diverters Schenck Process offers a wide range of airlocks and diverter
4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
TYPE 7800 SERIES 7848D/7848W UNIVERSAL VESSEL SEAL Technical Specification
A Face/Primary Ring B Seat/Mating Ring C O-ring D Disc E Sleeve F Retaining Sleeve D C E C F A B Product Description The Universal Vessel Seal 7800 Series is a modular cartridge seal for use in a wide
Technical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
Liquid Ring Compressors Engineered-to-Order Compressor Systems
Liquid Ring Compressors Engineered-to-Order Compressor Systems NASH Liquid Ring Compressors Greatest Performance Range of Liquid Ring Compressors Worldwide The ability to compress wet, saturated or dirty
Glycol Systems. Engineering Manual. 1/2 to 10 Hp Pumps 3 to 190 Tons Drycoolers (60 Hz Data) Pump Packages & Remote Outdoor Drycoolers
Glycol Systems Engineering Manual 1/2 to 10 Hp Pumps 3 to 190 Tons Drycoolers (60 Hz Data) Pump Packages & Remote Outdoor Drycoolers Stulz Air Technology Systems, Inc. Table of Contents Section - 1 Table
John Crane Type 609HTC/ECS (High-Temperature Corrosion Resistant) Sealol Metal Bellows Seal Installation Instructions
I-609HTC/ECS John Crane Type 609HTC/ECS (High-Temperature Corrosion Resistant) Sealol Metal ellows Seal Installation Instructions Foreword These instructions are provided to familiarize the user with the
SECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
AVK SERIES 601, 602, 603 & 605 UNIVERSAL COUPLINGS, ADAPTORS & END CAPS INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction for use Thank you for selecting an AVK product. With correct use, the product is guaranteed to deliver a long and reliable service. This manual has been prepared to assist you with the installation,
Three-port valves. Special versions with special stem sealing gland for: High temperature hot water C Thermo oils
4 440 Three-port valves with flange, PN6 VXF4... Three-port valves with flange, PN6 Can be used as mixing or diverting valves Grey cast iron GG-25 DN5...50 mm k vs.9...300 m 3 /h Stroke 20 or 40 mm Can
Sandvik Jaw Crushers
Sandvik Jaw Crushers Excellent durability thanks to welded frame. Range including models for mobile applications. 2 The product of decades of experience At Sandvik we have over a century of experience
Sprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
Design Envelope Booster. Sequence of operation
Design Envelope Booster Sequence of operation File No: 62.835 Date: february 11, 2015 Supersedes: 62.835 Date: july 11, 2014 sequence of operation Design Envelope Booster 2 general The packaged domestic
Displacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
PVK OPEN LOOP PUMPS. Bulletin E
PVK OPEN LOOP PUMPS Bulletin 47025-E Table of Contents Performance Assurance page 3 Features and Benefits page 4-5 Specifications page 6 Pump Controls page 7 Table of Contents Curves Performance page 8
AIR AND VACUUM VALVES
MINING DIVISION AIR AND VACUUM VALVES FOR HIGH FLOW K-6NS SERIES DESCRIPTION The K-6NS Series Air and Vacuum Valve discharges air during the filling or charging of the system and admits air into the system
400V 50Hz. Tsurumi TRN. Submersible aerator. Auto-suction submersible aerator for communal and industrial waste water clearance and treatment.
Tsurumi TRN 400V Hz Submersible aerator Auto-suction submersible aerator for communal and industrial waste water clearance and treatment. TRN-submersible aerator The Tsurumi TRN-submersible aerator is
Technical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
Liquid ring compressors
Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
Glycol Systems. Engineering Manual. 1/2 to 10 Hp Pumps 3 to 190 Tons Drycoolers (60 Hz Data) Pump Packages & Remote Outdoor Drycoolers
Glycol Systems Engineering Manual 1/2 to 10 Hp Pumps 3 to 190 Tons Drycoolers (60 Hz Data) Pump Packages & Remote Outdoor Drycoolers Stulz Table of Contents Section - 1 Table of Contents... 1-1 Glycol
Surplus Vehicle and Other Equipment Sealed Bid Listing with results November 5, 2018
Surplus Vehicle and Other Equipment Sealed Bid Listing with results November 5, 2018 Where: The west end of the General Services building (111 W. Knollview Dr.) located at the corner of Knollview Dr. and
Sprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
Variable displacement vane pump (with mechanical pressure compensator)
Variable displacement vane (with mechanical pressure compensator) PVS-Type Key Features: Rotation: Right (viewed from shaft end) Mounting flanges: 4-hole flange (UNI ISO 319/2) onnections: GS SP (UNI ISO
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
FITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable!
FITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable! 1 The New Düker Plunger Valve Type 7015 St Plunger valves
D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER
. ACCESSORIES AAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANLES & LIFT CORS GALVANIC PROTECTION KITS MUSHROOM STRAINER SLUGE STRAINERS NEMA 4 WATERTIGHT CONTROL & UAL LEVEL CONTROL (Replaces
MZT PUMPI PUMP YOUR WAY TO SUCCESS MULTISTAGE CENTRIFUGAL PUMPS - MS,DMS,MSTD,MSS
UM YOUR WAY TO SUCCESS MULTISTAGE CENTRIFUGAL UMS - MS,DMS,MSTD,MSS Catalog 9 CONTENT GENERAL DATA.................................................... 3 Description.......................................................
Quincy QSG Gasends 225, 430, 580, 730 & 850
Quincy QSG Gasends 225, 430, 580, 730 & 850 Parts Manual This publication contains important safety information and should be made available to all personnel who operate and/or maintain this product. Carefully
Fig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions
16355/5 IM-S6-17 ST Issue 5 Fig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation
OMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
Turbo Blowers. Combustion Excellence Since Features. Benefits
Turbo Blowers Features Integral molded scroll design Turbine bladed impeller Steel inlet guard Precisely balanced impellers eliminate vibration Complete line of available accessories for adapting to any
Case 12 Multistage Centrifugal Refrigeration System Halocarbon Refrigerant
Case 12 Multistage Centrifugal Refrigeration System Halocarbon Refrigerant Copy Right By: Thomas T.S. Wan 温 ) April 15, 2011 All Rights Reserved Case Background: This case is to show how to achieve the
4x6x10M. 6x8x12M GPM CUBIC METERS PER HOUR. 8x10x20S. 8x8x17. 6x8x17M. 8x10x17S. 10x12x14. 6x8x12XL. 8x10x12L. 4x6x12A. 6x8x12M. 6x8x12S.
METERS FEET 3 RPM 6 1 4 7 4 3 1 2x3x11L 1 3 4 1 3 4 GPM METERS FEET 118 RPM 1 4 3 8 4x6x12A 6 1 4 4x6xM 3 4 3 2 3 1 8 6 4 4 2x3x11L 2x3x11S 2x3x11S 3 4 7 1 3 4 7 1 CUBIC METERS PER HOUR 6x8x17L 4x6x14L
U.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
Model 531A AURORA. 530 Series SINGLE STAGE SUMP PUMPS NSB
Model 531A AURORA 530 Series SINGLE STAGE SUMP PUMPS NSB WWW.AURORAPUMP.COM AURORA 530 Series Single Stage Sump Pumps NSB Capacities to 1200 GPM Heads to 180 Feet Temperatures to 180 F Introduction The
DISASSEMBLY AND ASSEMBLY INSTRUCTIONS FOR LIQUID RING COMPRESSORS
DISASSEMBLY AND ASSEMBLY INSTRUCTIONS FOR LIQUID RING COMPRESSORS SA INTRODUCTION These instructions are for the maintenance personnel for maintenance and repair of compressors series SA. Disassembly and
2 I All-Flo Pump Co.
2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix PRODUCT SERIES PUMP SIZE FLUID CONNECTI INTERM INNER CHAM ON TYPE FLUID C HAMBER MANIFOLDS EDI A TE/ BER O-RINGS VAL VE SEAT VALVE/BAL
Submersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series
Submersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series Submersible pumps for clean and slightly dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres,
CFC2. Float Control For Closed Tanks MODEL. Specifications. Dimensions (In Inches) Reservoir Connection 1" NPT (Typ. Both Ends 2 Places)
MODEL Float Control For Closed Tanks Accurate Liquid Level Control Fully Hydraulic Operation Simple Design, Easy Maintenance No Lubrication Necessary No Gears, No Mechanical Linkage Between Valve and Control
THE DISECTION of the SUBMERSIBLE MOTOR and PUMP. Deepwell Submersibles
THE DISECTION of the SUBMERSIBLE MOTOR and PUMP THE DISECTION of the SUBMERSIBLE MOTOR and PUMP Presented by: Ken Adams Project Engineer - Submersibles History: Twenty Six Years as Flowserve Design Engineer,
5/2014 Supersedes None SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE TYPE VLSE
SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE TYPE VLSE This guide is valid for all Grundfos CBS Inc. products beginning with product code 28 only. WhileGrundfos
DS MB, MBF THREE PORT VALVES
DS 4.501 04/96, F THREE PORT VALVES Specification No. 617-X-XXX* F 618-X-XXX* and F valves are of the 3-port rotary-shoe type. They are characterised for use as mixing or diverting valves, with hot or
BTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and