Frank J. Marino, CSP Partner
|
|
- Jayson Melton
- 5 years ago
- Views:
Transcription
1 Illinois Roofing Symposium & Legislative Reception Tuesday, April 4 th 2017 Frank J. Marino, CSP Partner
2 Presentation Outline 2016 local Inspection Results 2016 OSHA Top 10 OSHA Update
3 Chicagoland Safety Inspection Deficiencies Fire Protection 13% Access Between Elevations 11% 2016 Inspections With Violations: 71% Without Violations: 29% Electrical 7% Fall Protection 56% Material Storage, Handling, & Disposal 5% Personal Protective Equipment 4% Hazard Communication 2% Scaffold <1%
4
5 ACCESS VIOLATIONS Ladder not secured 10% Top / Bottom of ladder not kept clear 5% Wrong ladder type 3% 3 Points of Contact not maintained 2% Break in Elevation > 19"; No steps / ladder 23% Ladder not extended 3 feet 16% Damaged Ladder in use 20% Ladder feet missing 3% Improper use of stepladder 11% Improper ladder footing 2% Hand rail needed 2% Fixed ladder deficiencies 3%
6 FIRE VIOLATIONS Kettle/Tanker fire safety 4% Propane cylinder storage 1% Fire extinguisher discharged 13% Fire extinguisher deficiencies 4% Propane < 10 Feet from torch flame 1% Safety gas can deficiencies 11% Lack of Fire extinguisher 10% Fire extinguisher inspection 17% Compressed gas cylinders not secured 29% Flammable Liquid Handling & Storage 8% Smoking near flammables 2%
7 ELECTRICAL VIOLATIONS Cord ran through wall/window/doo r 3% Exposed wiring 2% Close proximity to electrical power circuit 9% Lack of a GFCI 37% Damaged Electrical Cords / Tools 35% Extension Cord not protected 14%
8 MATERIAL HANDLING VIOLATIONS Fall protection screen for material 5% Roofing material used as beam ballast 5% Rigging: Capacity Marking 5% Improper use of rigging/hand lines 5% Crane hand signal deficiencies 5% Damaged rigging equipment 4% Damaged hoisting equipment 9% Material Storage 62%
9 PPE VIOLATIONS Lack of Safety Glasses 14% Misuse of hardhat 5% Lack of Hardhats 33% Lack of Gloves 10% Protective Clothing 19% Improper use of hardhats 5% Lack of Face-shield 14%
10 OSHA Top 10
11
12 Top 10 OSHA Citations by Penalty Amount for Calendar Year 2016
13 Data Parameters INSPECTION DATA FROM THE FOLLOWING OSHA AREA OFFICES: CHICAGO NORTH NORTH AURORA CALUMET CITY MILWAUKEE
14 Citations issued 476 TOTAL VIOLATIONS ISSUED VIOLATION BREAKDOWN: 6 WILLFUL VIOLATIONS 87 REPEAT VIOLATIONS 382 SERIOUS VIOLATIONS 1 OTHER-THAN-SERIOUS VIOLATION
15 no (b)(13) residential construction fall protection 172 violations 5 Willful, 53 repeat, 114 serious $1,147,601 penalty
16
17
18 No (b)(10) Low-slope roof fall protection 58 Violations 12 repeat, 46 serious $359,528 Penalty
19
20 No (a)(1) Fall protection training 61 violations 1 willful, 3 repeat, 57 serious $176,779 penalty
21
22
23
24
25 No (b)(1) Ladder not extended 3 feet above upper landing surface 55 violations 4 repeat, 50 serious, 1 other-than-serious $134,700 penalty
26
27 No (b)(1) unprotected sides & edges 15 Violations 5 repeat, 10 serious $128,318 Penalty
28
29 No (a)(1) Eye protection 47 Violations 1 repeat, 46 serious $93,059 Penalty
30
31 No (a) No hard hat 32 violations 3 repeat, 29 serious $88,256 penalty
32
33 No (b)(22) carrying loads while on ladder 9 violations 1 repeat, 8 serious $46,419 penalty
34
35 No (b)(11) STEEP slope roof fall protection 18 Violations 3 repeat, 15 serious $41,712 Penalty
36
37 No (g)(1)(i) No fall protection while on a ladder jack scaffold 9 violations 2 repeats, 7 serious $36,876 penalty
38
39 Top 10 OSHA Citations by Penalty Amount for Calendar Year total violations $2,253,248 total penalty $4,734 Average per violation
40 OSHA Update
41 Penalty Increase November 2015 Congress enacted legislation requiring federal agencies to adjust their civil penalties to account for inflation Penalties have not been adjusted since 1990 New penalties took effect August 2, 2016 Each year Office of Management & Budget will issue guidance to agencies to adjust their penalties before January 15 of the next year based on the Consumer Price Index (CPI-U) On January 15, 2017, a CPI-U adjustment factor of was applied to OSHA penalties
42 Penalty Increase Type of Violation Current Maximum Penalty New Maximum Penalty Serious Other-Than-Serious Posting Requirements Failure to Abate $12,471 per violation $12,675 per violation $12,471 per day beyond the abatement date $12,675 per day beyond the abatement date Willful or Repeated $124,709 per violation $126,749 per violation Number of Employees in Company Percent Reduction or more None
43
44 Crane Standard Certified Crane Operator November 2017
45 Operator Qualifications and Certifications (cont d) Accredited testing organization Employer Qualification Program Portable YES * NO 5 years 5 years US Military license NO * Set by issuing entity State/local license NO * Valid only in entity s jurisdiction Valid Set by issuing entity, not > 5 years 45
46 Written Certification Tests Administered in any language understood by the operator candidate. Test must cover: Controls/performance characteristics Calculate capacity (w/ or w/out calculator) Preventing power line contact Ground support Read and locate info in operating manual Appendix Q subjects
47 Practical Examination Must be well designed and sufficiently comprehensive Must have the demonstrated the skills and knowledge needed to operate the equipment safely. An operator's ability to handle unusual worksite conditions, such as adverse weather or working on crowded jobsites, are hazards that are not commonly part of this exam.
48 New OSHA Recordkeeping Requirements Injury & Illness data, which is already required to be recorded, must now be reported electronically to OSHA Based on behavioral economics, OSHA believes that making injury information publicly available will nudge employers to focus on safety. OSHA will provide a secure website with three options for submission Not all data on Forms 300, 300A, & 301 must be submitted The amount of data required to be submitted is dependent on the size of the employer and the industrial classification (NAICS).
49 New OSHA Recordkeeping Requirements For employers with 250 or more employees: Information on Form 300A due by 7/1/2017 Information on Form 300A & select information on 300 & 301 due by 7/1/2018 Information on Form 300A & select information on 300 & 301 due by 3/2 every year thereafter, starting in 2019 For employers with employees and in certain high-risk industries: Information on Form 300A due by 7/1/2017 Information on Form 300A due by 7/1/2018 Information on Form 300A due by 3/2 every year thereafter, starting in 2019
50 New OSHA Recordkeeping Requirements High-risk industries include but are not limited to: NAICS Industry 11 Agriculture, forestry, fishing and hunting 22 Utilities 23 Construction Manufacturing 42 Wholesale trade
51 New OSHA Recordkeeping Requirements According to OSHA, this regulation will also improve the accuracy of this data by ensuring that workers will not fear retaliation for reporting injuries or illnesses. Although Section 11(c) the OSH Act of 1970 has always included anti-discrimination provisions, this rule includes anti-retaliation protections, which specifically prohibits employers from discouraging workers from reporting an injury or illness. This allows OSHA to issue citations in cases where the employee did not make a timely 11(c) complaint within 30 days of the retaliation, as is required by the Act. The need to issue such citations? concerns that new electronic reporting requirements could lead to increased incentives to take retaliatory action that would discourage workers from reporting their work-related injuries or illnesses.
52 New OSHA Recordkeeping Requirements An employer s procedure for reporting injuries and illnesses must be reasonable and must not deter or discourage reporting This rule requires employers to inform employees that they have a right to report work-related injuries and illnesses free from retaliation by their employer One of many ways to do this, is to post the most current version of the already required OSHA poster (Form 3165)
53 New OSHA Recordkeeping Requirements The rule does not ban appropriate disciplinary, incentive, or drugtesting programs. However, it allows OSHA to issue citations for retaliatory actions against workers when these programs are used to discourage workers from exercising their right to report workplace injuries and illnesses The new recordkeeping rules became effective January 1, 2017
54 New OSHA Recordkeeping Requirements Changes to citation policies??
55 Silica Standard Respirable Crystalline Silica Quartz (SiO2) is the most common form of crystalline silica Basic component of sand, soil, granite, and many other minerals Inhalation hazard when dust particles are very small, or respirable Crystalline silica becomes respirable (< 10 micrometers) when workers chip, cut, drill, or grind objects that contain crystalline silica
56 Silica Standard (Cont.) Common objects that contain silica include: Asphalt Brick Concrete Cement Concrete Block Drywall Grout Mortar Plaster Roof Tile (concrete) Clay and ceramic tile Sand Stone (granite, limestone, sandstone, etc.) Soil
57 Silica Standard (Cont.) Respirable crystalline silica is classified as a human carcinogen Exposure to respirable crystalline silica causes silicosis The silica dust forms scar tissue in lungs, reducing lungs ability to take in oxygen Prevention is key. There is no cure for silicosis
58 Silica Standard (Cont.) Highlights of new OSHA standard, 29 CFR Becomes effective June 23, 2017 Applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below the Action Level under any foreseeable conditions. Reduces the permissible exposure limit (PEL) to 50 µg/m³ (8-hr. TWA), one fifth of the old PEL, which was approximately 250 µg/m³, Establishes an Action Level of 25 µg/m³ (8-hr. TWA), which triggers the requirements of the standard
59 Silica Standard (Cont.) If exposure is at or above the Action Level, employers have three options: Follow Table 1, which contains 18 pre-defined tasks using specific engineering controls (e.g. wet methods, dust collection systems), and in some cases, respiratory protection as an additional control. Rely on objective data that proves the control method reduces exposure below the PEL Assess exposure by performing personal air monitoring
60 Silica Standard (Cont.) If Table 1 is not followed, employers must: Measure the amount of silica that workers are exposed to if it may be at or above an action level of 25 µg/m³ (8-hr. TWA). Protect workers from respirable crystalline silica exposures above the PEL of 50 µg/m³ (8-hr. TWA). Use dust controls to protect workers from silica exposures above the PEL. Provide respirators to workers when dust controls cannot limit exposures to the PEL.
61 Silica Standard (Cont.) Medical Surveillance Medical exams must be made available to employees who are required to use respirators under the standard for 30 days or more per year Written Exposure Control Plan Required when exposure may be at or above the Action Level. Must contain: Description of tasks Description of engineering controls, work practices, and PPE used Description of housekeeping measures Description of procedures used to restrict access to work areas when necessary
62 Silica Standard (Cont.) Employees must be trained on: The health hazards associated with exposure to respirable crystalline silica; Tasks in the workplace that could result in exposure Specific engineering controls, work practices, and respirators to be used; The contents of the silica standard The identity of the competent person designated to implement the exposure control plan The purpose and a description of the medical surveillance program
63 OSHA Walking / Working Surfaces Standard for General Industry The rule benefits employers by providing greater flexibility in choosing a fall protection system. For example, it eliminates the existing mandate to use guardrails as a primary fall protection method and allows employers to choose from accepted fall protection systems they believe will work best in a particular situation.
64 OSHA Walking / Working Surfaces Standard for General Industry Alignment with Construction Standards As much as possible, OSHA aligned fall protection requirements for general industry with those for construction, easing compliance for employers who perform both types of activities. Outdated scaffold standard has been replaced with reference to 1926, which makes the two standards identical Criteria for guardrail systems aligned with requirements of 1926 construction standard. The height requirement is no longer 42 inches. It is now 42 +/- 3, as it is in construction. More options to protect employees from falling through holes/skylights Covers Guardrails Travel Restraint Systems Personal Fall Arrest Systems
65 OSHA Walking / Working Surfaces Standard for General Industry The old standard for skylight protection was a screen capable of withstanding 200 lbs. Now, if covers are used to protect a skylight, they must be capable of supporting at least twice the maximum intended load that may be imposed on the cover at any one time, which is nearly identical to the construction standard.
66 OSHA Walking / Working Surfaces Standard for General Industry Allows for alternative fall prevention procedures similar to the construction standard: Designated Areas (similar to the warning line system for roofing work) are permitted on low-slope roofs for work that is both temporary and infrequent The minimum distance the warning line must be from the roof edge varies (6, 10, & 15 ) depending on the nature, duration, and location of the work, and the equipment used, similar to the mechanical equipment rules for roofing work in construction
67 OSHA Walking / Working Surfaces Standard for General Industry Some key differences from construction standard Fall Protection Training must be conducted by a Qualified Person, as opposed to a Competent Person required under the construction standard. The fall protection threshold remains at 4 in general industry, whereas construction is 6 Walking/working surface design, maintenance, & training must also address fall to same level hazards.
68 OSHA Walking / Working Surfaces Standard for General Industry Most of the rule will become effective 60 days after publication in the Federal Register (11/17/2016), but some provisions have delayed effective dates, including: Ensuring exposed workers are trained on fall hazards (6 months), Ensuring workers who use equipment covered by the final rule are trained (6 months), Inspecting and certifying permanent anchorages for rope descent systems (1 year),
69 OSHA Walking / Working Surfaces Standard for General Industry Installing personal fall arrest or ladder safety systems on new fixed ladders over 24 feet and on replacement ladders/ladder sections, including fixed ladders on outdoor advertising structures (2 years), Ensuring existing fixed ladders over 24 feet, including those on outdoor advertising structures, are equipped with a cage, well, personal fall arrest system, or ladder safety system (2 years), and Replacing cages and wells (used as fall protection) with ladder safety or personal fall arrest systems on all fixed ladders over 24 feet (20 years).
70 Questions..?
OSHA Final Rule: Occupational Exposure to Respirable Crystalline Silica
OSHA Final Rule: Occupational Exposure to Respirable Crystalline Silica OSHA has amended its existing standards for occupational exposure to respirable crystalline silica. They have determined that employees
More informationSpecifically. Construction
Specifically Construction Goals for this presentation What is Silica? Where is Silica on our jobsites? How is Silica a hazard? What does OSHA require from Contractors? What is Table 1? Alternate Methods
More informationOSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica David O Connor OSHA Directorate of Standards and Guidance March 8, 2017 Final Rule Published on March 25, 2016 Reasons for the
More informationOSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica: The Construction Standard
OSHA s Final Rule on Occupational Exposure to Respirable Crystalline Silica: The Construction Standard David O Connor oconnor.david@dol.gov 202-693-2269 OSHA Directorate of Standards and Guidance December
More informationUniversity of Delaware Respirable Crystalline Silica Dust Program June 2018
University of Delaware Respirable Crystalline Silica Dust Program June 2018 Prepared by: University of Delaware Department of Environmental Health and Safety 222 S. Chapel Street Newark, DE 19716 www.udel.edu/ehs
More informationPracticing Proactive Silica Dust Housekeeping by: Nilfisk, Inc.
Practicing Proactive Silica Dust Housekeeping by: Nilfisk, Inc. Page 1 Overview 1 2 3 4 What is Silica Dust? Silica Dust Events and NEW OSHA Standard Who s at Risk? Proper Engineering Controls and Housekeeping
More informationSilica Dust Safety Program
Silica Dust Safety Program Prepared by: The Ohio State University Environmental Health and Safety Occupational Safety & Industrial Hygiene 1314 Kinnear Road Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404
More informationRegulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule
Regulatory Update Regulation Summary: Walking-Working Surfaces & Personal Protective Equipment (Fall Protection Systems); OSHA s Final Rule General Industry 29 CFR 1910 On November 17, 2016, OSHA published
More informationPresented by: Laura Cullom Phillips 66 Rodeo Jay Prescott Shell Martinez Refinery
Presented by: Laura Cullom Phillips 66 Rodeo Jay Prescott Shell Martinez Refinery WHAT IS CRYSTALLINE SILICA? Silica is a naturally occurring mineral found in rock, sand, stone, concrete, brick, mortar,
More informationWalking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
More informationReporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions As of January 1, 2015, employers must report the following to OSHA: All work-related fatalities within 8 hours
More informationHow OSHA's New Crystalline Silica Rule Will Affect Your Operations
How OSHA's New Crystalline Silica Rule Will Affect Your Operations November 17, 2017 Josh Schultz Law Office of Adele L. Abrams jschultz@aabramslaw.com (303) 228-2170 This is Why You are Here Today; The
More informationOSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None
Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,
More informationOSHA s Respirable Crystalline Silica Standard for Construction. OSHA Cranes & Derricks Subpart CC
OSHA Silica Rule OSHA s Respirable Crystalline Silica Standard for Construction OSHA Cranes & Derricks Subpart CC Workers who are exposed to respirable crystalline silica dust are at increased risk of
More informationOSHA's New Silica Rule Everything You Need to Know. Defined. Respirable Crystalline Silica Dust
OSHA's New Silica Rule Everything You Need to Know Chris Hall, CHST 12 West Vermont Street Indianapolis, IN 46204 800.641.5990 www.safetyresources.com Defined Respirable Crystalline Silica Dust Common
More informationSILICA EXPOSURE MEASUREMENT IN REAL-TIME FOR CONSTRUCTION
SILICA EXPOSURE MEASUREMENT IN REAL-TIME FOR CONSTRUCTION APPLICATION NOTE EXPMN-023(A4) Frequently Asked Questions What is crystalline silica and why is it important to measure exposure? Silica is found
More informationOSHA Silica Regulation s Upcoming Impact
OSHA Silica Regulation s Upcoming Impact North Eastern States Materials Engineering Association October 18, 2016 Tina M. Stanczewski Law Office of Adele L. Abrams tstanczewski@aabramslaw.com (301) 595-3520
More informationKey provisions of OSHA's new rule on walking/working surfaces, fall protection
ARTICLES CASES Key provisions of OSHA's new rule on walking/working surfaces, fall protection Although an overwhelming majority of general industry accidents stem from slips, trips and falls, Subpart D
More informationOSHA s Construction Standard for Occupational Exposure to Respirable Crystalline Silica 29 CFR
OSHA s Construction Standard for Occupational Exposure to Respirable Crystalline Silica 29 CFR 1926.1053 Joseph Coble ScD, CIH Director, Office of Technological Feasibility Directorate of Standards and
More informationOSHA CRYSTALLINE SILICA STANDARD CRYSTALLINE SILICA STANDARD 29 CFR rpbsafety.com
OSHA CRYSTALLINE SILICA STANDARD CRYSTALLINE SILICA STANDARD 29 CFR 1926.1153 1 rpbsafety.com 2 HIGH LEVEL OSHA SILICA STANDARD RATIONALE OSHA estimates that the rule will save over 600 lives and prevent
More informationTRAIN THE TRAINER FIELD GUIDE SILICA SAFETY
TRAIN THE TRAINER SILICA SAFETY PURPOSE The purpose of this manual is to serve as a guideline/resource for Field Management during training sessions on silica safety. Information contained in this manual
More informationRespirable Crystalline Silica
Respirable Crystalline Silica 29 CFR 1926.1153 Presented by: ETTA Bureau, 919-807-2875 Objectives 1926.1153 In this course, we will discuss: Respirable crystalline silica what it is, sources and health
More informationSILICA WEBINAR. Chris Chipponeri Chief Operations Officer Hazard Management Services, Inc.
SILICA WEBINAR Chris Chipponeri Chief Operations Officer Hazard Management Services, Inc. SILICA HISTORY AND BACKGROUND Basic component of soil, sand, granite and many other minerals Naturally-occurring
More informationSilica Intro. Silica is the second most common element on earth It is 28% of the earth s crust Several forms. Found: dirt, rocks, drywall.
Silica Training Silica Intro Silica is the second most common element on earth It is 28% of the earth s crust Several forms Crystalline Amorphous (non crystaline) Types: Quartz Cristobalite Tridymite Found:
More informationOSHA s Proposed Silica Rule Randy Nicholls Northwestern Energy
OSHA s Proposed Silica Rule 1910.1053 Randy Nicholls Northwestern Energy Exposure Limit Comparison Previous Permissible Exposure Limit from Table Z- 3, Mineral Dusts, had to be calculated as follows: Quartz
More information2. True or False: Inhaling very small crystalline silica can be hazardous to employee health.
COMPETENT PERSON TEST 1. True or False: Crystalline silica is a common mineral that occurs in many naturally occurring and man-made materials used at construction sites. 2. True or False: Inhaling very
More informationSilica Health Standard. Subpart Z 29 CFR
Silica Health Standard Subpart Z 29 CFR 1926.1153 Topics Scope and Definitions Specified & Alternative Exposure Controls Respiratory Protection Housekeeping Written Exposure Control Plan Medical Requirements
More informationJohn Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO
OSHA s Respirable Crystalline Silica Rule May 2016 John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov Denver AO
More informationOccupational Safety and Health Administration
Occupational Safety and Health Administration Standard Number: 1910.134; 1910.1053; 1910.1200; 1926.1153; 1926.1153(c); 1926.1153(c)(1); 1926.1153(d); 1926.1153(d)(1); 1926.1153(d)(2); 1926.1153(d)(2)(iii)(B);
More informationOSHA S CRYSTALLINE SILICA RULE: What does it mean for you?
OSHA S CRYSTALLINE SILICA RULE: What does it mean for you? WHAT IS RESPIRABLE SILICA AND WHO IS EXPOSED? Crystalline silica is an abundant natural material found in soil, stone and sand. It is also present
More informationE Light Electric Services, Inc. Workplace Crystalline Silica Exposure Control Policy
E Light Electric Services, Inc. Workplace Crystalline Silica Exposure Control Policy Approval: Approved. Ted Smith 10/9/17 Rev: 0 10/03/17 1. Purpose To reduce employee exposure of airborne crystalline
More informationSILICA EXPOSURE CONTROL PLAN
SILICA EXPOSURE CONTROL PLAN June 2017 Contents Purpose... 3 Scope... 3 Responsibilities... 3 Program Requirements... 4 Initial Exposure Assessment... 4 Periodic Exposure Assessment... 5 Employee Notification...
More informationSubparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
More informationNovember Head Safety... P. 2-3 Winter Driving Safety... P. 4-5 Do Not Obstruct (Emergency Equipment)... P. 6-7 Power Actuated Tool... P.
November, 2016 : Head Safety... P. 2-3 Winter Driving Safety... P. 4-5 Do Not Obstruct (Emergency Equipment)... P. 6-7 Power Actuated Tool... P. 8-9 Safety Article: November 2016 New Silica Rules... P.
More informationWalking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
More informationHighlights of Respirable Crystalline Silica. Jim Shelton, CAS Houston North Area Office
Highlights of 1926.1153 Respirable Crystalline Silica Jim Shelton, CAS Houston North Area Office 1926.1153 Respirable Crystalline Silica Published March 25, 2016 Effective dates for construction: Effective
More informationCompliance with OSHA s Silica Rule
Compliance with OSHA s Silica Rule Rule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment Overview Known health hazard and top priority
More informationRule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment
Compliance with OSHA s Silica Rule Rule s obligations and implementation dates NAPA s guidance documents and other assistance Milling and brooming equipment Overview Known health hazard and top priority
More informationUpdate 29 CFR Subparts D & I
Because every life has a purpose Update 29 CFR 1910.30 Subparts D & I 1 OSHA & This Regulation OSHA has created regulations to protect workers from various hazards, including falls. OSHA has separate regulations
More informationPresented By: Kary S. Amin Nova Environmental, Inc. Nova Environmental, Inc.
Presented By: Kary S. Amin Definition of an Indoor Air Quality (IAQ) Problem: Air quality adversely affects building occupants Acceptable IAQ Air in which there are not known contaminants at harmful concentrations
More informationOSHA Respirable Crystalline Silica Standard: Tips for Developing a Compliance Strategy June 2016
RiskTopics OSHA Respirable Crystalline Silica Standard: Tips for Developing a Compliance Strategy June 2016 This RiskTopic outlines the new OSHA standard for respirable crystalline silica and provides
More informationApplying Construction Fall Protection Concepts to General Industry
Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This
More informationEngineering the Silica Out of Foundries
Engineering the Silica Out of Foundries Industrial Accessories Company - Introduction Capabilities Our Mission The Premier EPC Provider: Bring value in service, products, and solutions to meet customer
More informationRESPIRABLE CRYSTALLINE SILICA PROGRAM July 2018
RESPIRABLE CRYSTALLINE SILICA PROGRAM July 2018 A. SCOPE The Respirable Crystalline Silica Program is established in accordance with 29 CFR 1910.1053 and 29 CFR 1926.1153, Respirable Crystalline Silica.
More informationNew Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule
New Walking-Working Surfaces and PPE (Fall Protection) Rule John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov
More informationFall Prevention in Residential Construction FALL HAZARD AWARENESS, PREVENTION, SOLUTIONS, AND RESCUE.
Fall Prevention in Residential Construction FALL HAZARD AWARENESS, PREVENTION, SOLUTIONS, AND RESCUE. Welcome! This training is provided as a service to the residential construction industry by: jssafety.org
More informationTECHNICAL BULLETIN September 17, 2001
DuPont's Commitment to Safety DuPont is committed to selling only products that can be produced, handled and disposed of in a manner compatible with human safety and environmental best practices. Zodiaq
More informationFALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS
Requirements FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS Navy FP Chapter 13 of OPNAVINST 5100.23G (2005) and Fall Protection Guide for Ashore Facilities
More informationCHAPTER 39: SILICA AWARENESS
CHAPTER 39: SILICA AWARENESS 511 Purpose To reduce team member exposure to airborne crystalline silica to below the OSHA Permissible Exposure Limit (PEL) by means of substitution, engineering controls,
More informationOSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
More informationSILICA EXPOSURE PREVENTION PROGRAM
SILICA EXPOSURE PREVENTION PROGRAM A. BEFORE ANY EMPLOYEE GRINDS OR SAW CUTS CONCRETE AND WEARS A RESPIRATOR HE OR SHE MUST HAVE: 1. A medical examination, medical and occupational history to collect data
More informationRespirable Crystalline Silica Program
PURPOSE Respirable Crystalline Silica Program This Respirable Crystalline Silica Program was developed to prevent employee exposure to hazardous levels of Respirable Crystalline Silica that could result
More informationThe New OSHA Silica Standard
The New OSHA Silica Standard What do you need to know? March 17, 2017 Robyn Steiner, MSPH CIH CSP www.atcgroupservices.com Agenda What is Silica? Silica Exposure Health Effects OSHA regulations old and
More informationDREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
More informationFALL PROTECTION
115500 FALL PROTECTION PART 1 GENERAL 1.01 General A. Cornell University seeks to prevent exposures to fall hazards whenever possible and protect personnel that may be exposed to fall hazards. Therefore,
More informationOSHA FALL PROTECTION COMPLIANCE
WHITE PAPER ROOFING & BUILDING MAINTENANCE OSHA FALL PROTECTION COMPLIANCE TOUGH NEW STANDARDS TO PROTECT PEOPLE AND THE BOTTOM LINE Fall Protection under OSHA regulation 29 CFR 1926.501 has been the number
More informationRespirable Crystalline Silica
29 CFR 1 Overview What is Crystalline Silica OSHA Fact Sheets available OSHA Regulations Old vs New Definitions Exposure Control Methods Table 1 Alternative Exposure Control Methods Respiratory Protection
More informationPERSONAL PROTECTIVE EQUIPMENT
13.0 The purpose of this program is to ensure that, where applicable, the appropriate and necessary personal protective equipment (PPE) is selected and provided to employees to protect from illness or
More informationNo November 28, 2016 OSHA ISSUES SMALL ENTITY COMPLIANCE GUIDE FOR SILICA IN CONSTRUCTION
No. 1606 November 28, 2016 OSHA ISSUES SMALL ENTITY COMPLIANCE GUIDE FOR SILICA IN CONSTRUCTION The Occupational Safety and Health Administration (OSHA) has issued a final rule to curb lung cancer, silicosis,
More informationCreating a Written Silica Control Plan
Health & Safety Webinars Creating a Written Silica Control Plan March 13, 2018 NON-FERROUS FOUNDERS SOCIETY This webinar and all associated materials are Copyright 2018 by Non-Ferrous Founders Society
More informationFall Protection Resource Guide P AGE 1
Fall Protection Resource Guide P AGE 1 As a Home Builder, we do not self-perform any work. This section is a resource guide only and is not intended to put any requirements on the company. All subcontractors,
More informationNational Safety Stand-Down. January 22, 2016 Presented By:
National Safety Stand-Down To Prevent Falls in Construction January 22, 2016 Presented By: Larry Joswiak, MPH Assistant Area Director Frank J. Marino, CSP Partner Presentation Outline Local Inspection
More informationOSHA s New Respirable Crystalline Silica Standard for Construction What You Need to Know
OSHA s New Respirable Crystalline Silica Standard for Construction What You Need to Know Kevin Cannon AGC of America, cannonk@agc.org Nazia Shah AGC of America, nazia.shah@agc.org Enforcement Update Enforcement
More informationOSHA Silica Regulations: Impact & Best Practices
OSHA Silica Regulations: Impact & Best Practices OSHA Silica Regulations: Impact & Best Practices Khadija Talley Hilti This session is eligible for 1 Contact Hour. For these hours to appear on your certificate,
More informationOSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
More informationPalm Beach State College. Florida s First Public Community College SILICA EXPOSURE CONTROL PLAN
Palm Beach State College Florida s First Public Community College SILICA EXPOSURE CONTROL PLAN 2018 Purpose The purpose of this document is to establish and implement a written exposure control plan that
More informationCRYSTALLINE SILICA. Silica (Silicon dioxide) is one of the most common chemical compounds found in nature.
Silica (Silicon dioxide) is one of the most common chemical compounds found in nature. Amorphous silica is common sand. The most common crystalline silica is quartz. Tridymite and cristobalite are other
More informationOSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
More informationCompetent Person Training. OSHA Silica Standard
Slide 1 Competent Person Training OSHA Silica Standard Slide 2 Presenter: Alicia Dorsey Catamount Consulting, LLC P.O. Box 442 Warrensburg, NY 12885 518-623-2352 Email: ADorsey@catamountconsultingllc.com
More informationAPPENDIX A. Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows
APPENDIX A Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows 1. In general, fall protection must be provided to construction workers who are
More information4/18/2018. What is silica? Respirable Crystalline Silica. Concern: 3 forms of crystalline silica. Silica is found in rock, soil, and sand
What is silica? Respirable Crystalline Silica Its Not Just Dust! One of the most common minerals on Earth Photos courtesy PDPhoto.org Silica is found in rock, soil, and sand Concern: 3 forms of crystalline
More informationThis information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and others as they
New Walking-Working Surfaces and PPE (Fall Protection) Rule Disclaimer This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and
More informationFall Hazards at Walking and Working Surfaces What You Need to Know. Presented by PENTA Engineering Group, Inc. August 2017
Fall Hazards at Walking and Working Surfaces What You Need to Know Presented by PENTA Engineering Group, Inc. August 2017 Presenters Christopher M. Everett, PE President ceverett@pentaeng.com Michael J.
More informationCrystalline Silica Program
Crystalline Silica Program Occupational Health, Safety and Injury Prevention Subject Matter Expert Beth Handler Email: eh489@cornell.edu Phone (607) 227-7138 CONTENTS 1.0 INTRODUCTION... 3 2.0 OBJECTIVES...
More informationRecent OSHA Regulations. Presenter: Joe Mlynek CSP, OHST
Recent OSHA Regulations Presenter: Joe Mlynek CSP, OHST Today s Presentation Regulatory Reform Current Administration Electronic Reporting for Workplace Injuries and Illnesses Walking-Working Surface Standard
More informationOSHA Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for Construction
OSHA 3902-11 2016 Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for Construction Occupational Safety and Health Act of 1970 To assure safe and healthful working conditions
More informationFall Hazards: One of OSHA s Big Three. By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION
OPTIMUM Articles Provided by www.optimumresultsusa.com Fall Hazards: One of OSHA s Big Three By Mark A. Lies II and Elizabeth Leifel Ash I. INTRODUCTION In 2010, the Bureau of Labor Statistics (BLS) reported
More informationOverview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used
FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to
More informationOSHA Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for General Industry and Maritime
OSHA 3911-07 2017 Small Entity Compliance Guide for the Respirable Crystalline Silica Standard for General Industry and Maritime Occupational Safety and Health Act of 1970 To assure safe and healthful
More informationRespirable Crystalline Silica Standard. Presented by Joseph Kraham, CIH, CSP Director of Industrial Hygiene AIRIS Wellsite Services
Respirable Crystalline Silica Standard Presented by Joseph Kraham, CIH, CSP Director of Industrial Hygiene AIRIS Wellsite Services Overview Current 1910.1053 Status Perception vs. Reality Reviewing some
More informationSilica Dust in Construction: Real Case Studies in Exposure Assessment and Hazard Control
Silica Dust in Construction: Real Case Studies in Exposure Assessment and Hazard Control Xavier Alcaraz, CIH, CSP Principal Consultant Michael Peterson, CIH, CSP Senior Consultant 1 Webinar Logistics All
More informationExposure Control Plan for Drilling/Grinding Concrete
Exposure Control Plan for Drilling/Grinding Concrete Drilling or grinding into concrete without proper dust controls can generate high levels of silica-containing dust. Breathing in this fine dust can
More informationFAQs: Confined Spaces in Residential Construction
Provided by Marshall & Sterling, Inc. FAQs: Confined Spaces in Residential Construction A new standard for construction work in confined spaces became effective Aug. 3, 3015. The new standard (Subpart
More informationEffective Date: 24-April-2017 Version: 6 Page: 1 of 8 TITLE: SAF-370, PERSONAL PROTECTIVE EQUIPMENT GUIDELINES. Table of Contents
24-April-2017 Version: 6 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 3 Environmental Health and Safety Office (EHSO),
More informationSILICA EXPOSURE SAFETY POLICY & WRITTEN EXPOSURE CONTROL PLAN
SILICA EXPOSURE SAFETY POLICY & WRITTEN EXPOSURE CONTROL PLAN FOR TOWNSEND & SCHMIDT MASONRY 8788 Elder Creek Road Phone 916-383-5354 Contractors License #186559 Sacramento, CA 95828 Fax 916-383-5357 www.townsendschmidt.com
More information1.0 Scope and Application
1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and
More informationFALL PROTECTION PLAN INSTRUCTIONS
Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or
More informationIntroduction. Welcome to this course! Intended for: Duration: 60 minutes. Respirable Crystalline Silica for Exposed Construction Workers
Introduction Welcome to this course! Respirable Crystalline Silica for Exposed Construction Workers Intended for: Construction workers Construction foremen Construction managers Duration: 60 minutes Introduction
More informationRespirable Crystalline Silica Program
Respirable Crystalline Silica Program PURPOSE This Respirable Crystalline Silica Program was developed to prevent employee exposure to hazardous levels of Respirable Crystalline Silica that could result
More information#37 - Occupational Exposure to Silica; Final Rule
Regulatory Update #37 - Occupational Exposure to Silica; Final Rule Published: April 1, 2016 General Industry and Maritime 29 CFR 1910.1053 On March 25, 2016, OSHA (Occupational Safety and Health Administration)
More informationThe MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZODIAQ" QUARTZ SURFACES COR009 Revised
More informationConfined Space. Program Responsibilities
Confined Space CONFINED SPACE ENTRY AND RESCUE The OSHA standard on Permit-Required Confined Spaces (29 CFR 1910.146) requires employers to implement practices and procedures to protect employees from
More informationOSHA s Crystalline Silica Rule. Overview. What is Crystalline Silica? 1/10/2017
OSHA s Crystalline Silica Rule Adele L. Abrams, Esq., CMSP Law Office of Adele L. Abrams, PC www.safety-law.com Overview Final OSHA rule: March 25, 2016 Fed Reg 606 pp long! 30 pp of actual reg text and
More informationView-Only Access To edit and download this template as a Word document, please click here.
View-Only Access To edit and download this template as a Word document, please click here. The Association of the Wall and Ceiling Industry provides the following Respirable Crystalline Silica Control
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM INTERNAL AND EXTERNAL PAGE: 1 DEPARTMENT: ALL OF: 5
INTERNAL AND EXTERNAL PAGE: 1 1.0 OBJECTIVE The Federal Occupational Safety and Health Administration (OSHA) requirements for personal protective equipment (PPE) are presented in 29 CFR 1910.132 General
More informationSAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET Re-roofing exposes workers to the hazards of demolition work at heights. With the proper fall protection,
More informationNPGA White Paper. OSHA Hazard Communication Standard
I. INTRODUCTION NPGA White Paper OSHA Hazard Communication Standard The purpose of this white paper is to describe the changes to the Occupational Safety and Health Administration (OSHA) Hazard Communication
More informationRespiratory Protection Program 29CFR
Respiratory Protection Program 29CFR1910.134 Program Objectives OSHA requires employers to establish and implement procedures for the proper use of respirators by doing the following: Verify the need for
More informationFALL PROTECTION. Supplement to Standard Training Module
0 FALL PROTECTION Supplement to Standard Training Module TRAINING REQUIREMENTS OVERVIEW This standard Vivid training module provides a general overview of Fall Protection and the use of fall protection
More informationHarley-Davidson Motor Company
Harley-Davidson Motor Company Standardized Contractor Safety Pre-Qualification Form (SCSPF) Complete and email this form to the appropriate facility by clicking on the location below: Arizona Proving Grounds
More information