Manual Handling Safety Procedure
|
|
- Stanley Crawford
- 5 years ago
- Views:
Transcription
1 Pars Oil & Gas Company Manual Handling Safety Procedure HEALTH, SAFETY AND ENVIRONMENT PROCEDURE Manual Handling Safety Procedure DOCUMENT ID - PR-26-POGC-001 REVISION 0.0
2 Pars Oil & Gas Company Pages 21 Revision 00 Manual Handling Safety Procedure Document ID. PR-26-POGC-001 HSE Department Manual Handling Safety Procedure Document Authorization Document Type Security Classification Document Authority/Owner Document Custodian Safety Procedure Unrestricted P.O.G.C HSE Document Author HSE-S Approved By M.Ansari HSE-S593443
3 Table of Contents 1. INTRODUCTION PURPOSE SCOPE RESPOSIBILITIES PROCEDURES GENERAL ASSESSMENTS REDUCING THE RISK OF INJURY GOOD HANDLING TECHNIQUES KINETIC METHOD (SEE FIGURES 3, 4 AND 5) TRAINING DEFINITIONS & ABBREVIATIONS REFERENCES APPENDIXES SUGGESTION FORM September Manual Handling Safety Page 2
4 1. INTRODUCTION Pars Oil and Gas Company (POGC), a subsidiary of National Iranian Oil Company (NIOC), was established in POGC is a developmental and manufacturing organization that specializes in the fields of engineering and management of development projects, production, operation and integrated management of oil and gas reservoirs. POGC s mission is to ensure sustainable and preservative production and development of Iran s oil and gas industry in the areas under its responsibility, development of oil and gas value chain as well as optimization of energy supply processes at national, regional and international levels. POGC is also in charge of development of joint and non-joint oil and gas fields of the country including South Pars, North Pars, Golshan and Ferdowsi. Aimed at creating superior value and boosting the level of satisfaction of the beneficiaries and with an approach focusing on sustainable, integrated and knowledge-oriented production and development, the company feels committed to comply with national and international requirements, regulations and standards in such areas as quality, safety, as well as occupational and environmental health. 2. PURPOSE This procedure and guidance information has been developed to ensure that all persons carrying out manual handling duties handle the load in the safest possible manner, thereby avoiding sprains and strains to their back and other parts of the body. 3. SCOPE This procedure is to be used by POGC employees, members of the Contractor Project Management Team, Supervisors and Subcontractors who supervise and control persons carrying out manual handling duties. This procedure and guidance will also provide assistance in the necessary training of personnel involved in manual handling. 4. RESPOSIBILITIES 4.1 Site Manager To ensure that the manual handling of loads are kept to a minimum and that all persons carrying out manual handling duties are trained in the correct techniques and take a consideration to subcontractors to do these techniques. 4.2 HSE Manager September Manual Handling Safety Page 3
5 To monitor manual handling duties by conducting assessments on load handling. To arrange training for all persons concerned in correct manual handling techniques and provision of information on weights to be lifted. 4.3 HSE Supervisor/Field Supervisors To monitor manual handling duties by conducting assessments on load handling and provision of information on weights to be lifted. To ensure that the manual handling of loads are kept to a minimum and that all persons carrying out manual handling duties are trained in the correct techniques. 4.4 Contractor area Manager It is the Contractor s responsibility to provide a safe procedure and a safe working environment, which includes: Safe plant and equipment; Safe protective equipment; Manual handling aids if necessary; Rest or exercise breaks during tiring or repetitive tasks. Task planning before work begins; Employee training about potential hazards and skills required; Clearing the way to avoid bumping into or tripping over things; and Suitable protective clothing should be provided and worn 4.5 All employees All employees have a responsibility and duty to: work safely; participate in hazard identification, risk assessment and risk control when requested by theirs supervisor follow any information, training and instruction received from subcontractor Use the risk controls that have been provided by subcontractor. Handle, move materials properly and safely Use the correct methods for handling and manual of load and equipment while working at site September Manual Handling Safety Page 4
6 5. PROCEDURES 5.1 General Fatal manual handling accidents are extremely rare, however back injuries are the greatest single cause of sick leave. Sprains and strains are the result of excessive or incorrect use of bodily force; such injuries can lead to permanent disability No person(s) should be required to lift carry or move any load which, by reason of its size and weight is likely to jeopardize their health or safety Assessments need to be made on items to be lifted and considerations as to whether the load needs to be handled at all, or whether the requirement for manual handling can be minimized will need to be taken into account. If load handing is essential, the first step should be consideration of mechanical lifting equipment. This requirement should take place during the planning stage of the activity If as a result of such planning and assessments it is determined that Manual Handling is the only method applicable, information on the loads to be handled and adequate training must be provided to the persons involved in the manual handling tasks Employees could be trained to recognize loads whose weight, in conjunction with their shape and other feature, and the circumstances in which they are handled, might cause injury. In general, unfamiliar loads should be treated with caution and, if undue strain is felt, the task could be reconsidered. 5.2 Assessments Many operational and administrative tasks can involve manual handling, so a hazard identification process is best, using: direct observation; and incident report analysis. Risk assessments by management normally do as follow as Identify the Hazard Manual handling activities exert force during a task (lifting, lowering, pushing, pulling, carrying or moving; holding or restraining any person or thing). Consequently, it covers many tasks and these occur in every workplace, every day. Manual handling September Manual Handling Safety Page 5
7 affects all employees to a degree and is potentially a major health and safety risk in particular areas. Examples of manual handling tasks include: Office based work; Pushing trolleys; Lifting bags, suitcases or packages; Loading or unloading cargo; Handling equipment; Moving stock or stores; Shifting furniture; Unpacking or packing containers; Sorting mail Placing boxes on shelves Assess the Risk Factor Contractor/Subcontractor should study all manual handling tasks that pose a risk to health and safety. A workplace handling risk factor assessment could be considered as follow as: Actions and movements of the task; Duration and frequency of the task; Workplace layout and geometry where the task in terms of movement distance, direction, obstacles, Posture and position of the person; Location of the load, distance and direction moved; weights and forces ; Characteristics of the loads and equipment used; Organization of work; Environment factors such as temperature, humidity, illumination, noise, vibration, frictional stability of the foot, etc. Skills and experience of the person; Age, physical capacity or special needs of the person; Opportunities to vary work or have breaks; and Clothing worn. September Manual Handling Safety Page 6
8 Problems could be addressed in a practical way by looking at the same factors of "task", "load", "working environment" and "individual capability" to see where improvements can be made, for example: APPENDIX II will assist the assessment of risks involved Type of Injury Most manual handling injuries are strains and sprains and the most frequently injured part of the body is the back. Some manual handling back and neck injuries can cause workers long months of pain and rehabilitation. Serious strain injuries may require surgery and occasionally may cause life-long disability and loss of career. Manual handling tasks can also cause in slips, falls and crush incidents, involving cuts, bruises and broken bones. Manual handling injuries can also cause hernia, strained heart muscles and occupational overuse syndrome (OOS). Most manual handling injuries can be prevented by instruction, training and supervision. Risk assessments should to be reviewed with experience of the tasks, when there is a change in the handling operations and if a manual handling injury occurs. 5.3 Reducing the Risk of Injury Risks identified must be reduced, so far as is reasonably practicable, by taking "appropriate" steps as followed. The effectiveness of measures taken should be monitored and, if they do not have the desired effect, the situation should be reappraised Job design The best approach to preventing manual handling injuries is to avoid risks in the first place through safe design of processes. For the safe design of the work the supervisors could be mentioned that: Minimize the risk by engineering that means manual handling are designed with minimum risk; Minimize the risk by administrative that means introduce job rotation, implement a safe lifting policy, provide appropriate training; Provision personal protective equipment Working environment design for safely manual handling tasks; Individual capability could be improved by information and training September Manual Handling Safety Page 7
9 5.3.2 Risk mitigation If the risk assessment has shown a need to redesign a job then consider the following where applicable: Modify the object the object being handled may be modified or repackaged into a bigger or smaller weight or a different size or shape; Modify workplace layout the layout of equipment and furniture may be modified or rearranged. Rearrange materials flow the timing, and paths of materials flow may be modified; Different actions, movements, forces undertake a task in a different way using different actions movements and forces. Provision of mechanical aids or similar devices, such as a gin wheel or scaffold crane to minimize risk of injury Provide personal protective equipment e.g. non-slip footwear to prevent slips, trips and falls while performing manual handling activities; Remove unnecessary tasks; Prevent double handling; Prevent heavy carrying; Provide rest breaks during heavy or repetitive work; Manual handling by team lifting; Varying the operator position and posture; Identifying and controlling work peaks ; Isolate the hazard from the person. Containers used are constructed and maintained so no risk to health when manually handled; Allowing the employee to control their workflow; Regular monitoring and review. Records of injuries or near misses and assessing if incidents rising or falling; Administrative control September Manual Handling Safety Page 8
10 Administrative control of manual handling hazards is a could be mentioned to comply that: Development of safe systems of work; Maintain housekeeping procedure; Purchasing strategies that seek to control the introduction of manual handling hazards to the workplace; Supervision walk-through and staff meeting discussions issues ; Development of risk assessment systems Implementation of a manual handling training. Although the primary effort in reducing the risk of injury should be put into the three factors quoted above, also employees have duties to keep their health and safety. 5.4 Good Handling Techniques Good handling techniques are essential in the prevention of injury from manual handling operations. The correct method of lifting is to use the strong leg and thigh muscles and to maintain the natural shape of the spine throughout the lift. (See the APPENDIX I. Illustration). The following points should be emphasized in training programs and the capability of employees to follow such advice should be considered in good handling techniques: Plan the Moving Think before moving/handling. Where is the load to be placed? Use any appropriate handling aids. Do you need help with the load? Ensure there are no obstructions to the lift. For a long lift, such as ground to shoulder height, consider resting the load midway, if possible, in order to change grip. Quick mention could be considered as follow as: Keep the load close to the waist. Adopt a stable position. Get a good hold. Start in a good posture. Don t flex the back any further while lifting. Avoid twisting the back or leaning sideways September Manual Handling Safety Page 9
11 Keep the head up when handling Move smoothly. Don t lift or handle more than can be easily managed. Put down, and then adjust. If precise position of the load is necessary Good lifting and lowering The guideline weights in Figure below are weight limits for manual operations involving lifting and lowering at different "movement zones". They assume that the load is readily grasped with both hands and that the operation takes place in reasonable working conditions with the handler adopting a proper posture (such as straight back, bend knees etc.). Source: Guidance on Manual Handling Operation Regulations HSE Note: Further assessment is needed when the load to be handled is greater than 16 Kg. Read the bellow accompanying text before interpreting this diagram. Figure 1 The limits for lifting and lowering in above figure should be reduced if the handler twists to the side during the operation.( For example: the limits could be reduced by about 10% where the handler twists through 45 degrees and by about 20% where the handler twists through 90 degrees). The limits for lifting and lowering in above figure are applicable for relatively infrequent operations for example up to approximately 30 operations per hour where the pace of work is not forced, adequate pauses for rest or recovery are possible and the load is not supported for any length of time. They could be reduced if the operation is repeated more frequently. As a rough guide the limits should be reduced by 30% where the operation is September Manual Handling Safety Page 10
12 repeated once or twice per minute, by 50% where the operation is repeated around five to eight times per minute, by 80% where the operation is repeated more than twelve times per minute. It is also assumed that the load is held against the body and is carried no further than about 10 meters without resting. If the load is carried over a longer distance without resting the limits may need to be reduced Good Handling for Pushing and Pulling For pushing and pulling loads, the limit for starting or stopping the load is a force of about 20kg (200 newtons). The limit for keeping the load in motion is a force of about 10kg (100 newtons). It is assumed that the force is applied with the hands between knuckle and shoulder height. If this is not possible, the limits may need to be reduced. No specific limit is intended as to the distance over which the load is pushed or pulled provided that there are adequate opportunities for rest or recovery. The load has not to be moved for more than about 20 m without a break The person through ill health can t push or pull the load Handling Devices Aids such as barrows and trolleys could have handle heights that are between the shoulder and waist. Devices should be well maintained with wheels that run smoothly. Lifting may be replaced by controlled pushing or pulling in certain cases, such as sliding or rolling an object along. However uncontrolled sliding or rolling, particularly of large or heavy loads, may introduce additional risks thus increasing the risk of injury. For both pulling and pushing a secure footing is necessary and the hands need to be applied to the load between waist and shoulder height wherever possible. September Manual Handling Safety Page 11
13 Pulling: Wrong Right Pushin g: Wrong Right Figure Posture Bend the knees so that the hands, when grasping the load, are as nearly level with the waist as possible. Do not keel or over flex the knees. Keep the back straight (tucking in the chin helps). Lean forward a little over the load, if necessary, to get a good grip. Keep shoulders level and facing in the same direction as the hips. September Manual Handling Safety Page 12
14 5.4.5 Grip Try to keep the arms within the boundary formed by the legs. The optimum position and nature of the grip will depend on the circumstances and individual preference, but it must be secure. A hook grip is less fatiguing than keeping the fingers straight. If it is necessary to vary the grip as the lift proceeds, do this as smoothly as possible Correct Method of Lifting Do not jerk. Carry out the lifting movement smoothly, keeping control of the load. Move the feet. When turning to the side, move the feet; do not twist the trunk. Keep close to the load. Keep the load close to the trunk for as long as possible. Keep the heaviest side of the load next to the trunk. If a close approach to the load is not possible, try sliding it towards you before attempting to lift it. Put down, and then adjust. If precise positioning of the load is necessary, put it down first, and then slide it into the required position. 5.5 Kinetic Method (see Figures 3, 4 and 5) The Kinetic Method relies on using the strong leg muscles rather than the weaker back muscles, and using the momentum of the body weight to initiate movement in the desired direction. Personnel should be on the look out for splinters, projecting nails and sharp wire whenever they prepare to lift or carry loads. Also ensure that the space to set down the load has been identified and prepared. The person carrying the load should be able to see over the top of the load. When lifting, the chin should be held in and care taken not to bend the head forwards or backwards. The knees should be bent to a crouching position, the back held straight, but not necessarily vertical. A firm grip must be obtained with the palm of the hand and the roots of the fingers - using finger tips means more effort and a chance of dropping the load. Arms must be held as close to the body as possible so that the body takes the weight instead of the fingers, wrists, arms and shoulders. If possible opposite sides of the object should be gripped. Lifting must be done with the thigh muscles, by straightening the legs, lifting by easy stages from floor to knee, knee to carrying position. When carrying, do not change grip - rest the load on some support and then change. To set the object down, the lifting procedure should be reversed. Gloves must be worn when handling sharp or slippery objects. Do not wear rings. Do not stand holding a heavy load for any longer than absolutely necessary. Safety boots or shoes September Manual Handling Safety Page 13
15 must be worn. Special protective equipment must be worn when handling dangerous liquids or chemicals. When a load is being lifted and carried by a group of men, the same basic principles as above should apply. One man must be in charge and responsible for giving instructions. Use skids, levers or rollers to assist in moving heavy loads. Use chains or ropes to pull loads out of ditches etc. Notice: We will recommend to consider the National Iranian Oil Company (N.I.O.C.) safety regulations, PART 3: Methods and work safety conditions for more details. 6. TRAINING If manual handling has been assessed as a risk then appropriate training could be provided. Training could include: The risks to health from manual handling; Safe manual handling techniques; Correct and safe use of any assigned specialized equipment such as mechanical aids; Correct and safe use of any assigned PPE; Specific manual handling hazards; Safe work procedures; Using manual handling aids 7. DEFINITIONS & ABBREVIATIONS Contributory factors (manual handling): The factors of load, environment, people, task and management that can contribute to the incidence and severity of manual handling hazards Hazardous manual handling Involves any of the following: Repetitive or sustained application of force Repetitive or sustained awkward posture Repetitive or sustained movement Application of high force Exposure to sustained vibration Manual handling of loads that are unstable, unbalanced or difficult to hold September Manual Handling Safety Page 14
16 Manual handling: Activities such as lifting, pushing, pulling, holding, throwing and carrying. It also includes repetitive tasks such as packing, typing, assembling, cleaning and sorting, using handtools, and operating machinery and equipment. Musculoskeletal disorders (MSD): An injury or disease that arises in whole or part from manual handling in the workplace, whether occurring suddenly or over a long period of time. Personal protective equipment: Items of personal equipment worn for protection of some sort: ear muffs, gloves and boots are examples. Task Analysis: Task analysis comprise of the methodical investigation of activities specific to a task. Workplace design: The design of the workplace by implication in relation to the characteristics of the people who will use the workplace and the work that will be done in it 8. REFERENCES 1991 National Institute for Occupational Safety and Health (NIOSH) Lifting Equation, Proposed American Conference of Governmental Industrial Hygienists (ACGIH) Lifting Tables, and Snook and Ciriello Psychophysical Tables (Liberty Mutual Research 1978, rev. 1991). Guidance on Manual Handling Operation Regulations 1992 HSE Manual Handling Mr.H.Googoonani- Isfahan university publishers Lifting and carrying Mr.H.Googoonani nile Ab publisher- isbn: Second edition OSHA Standards (Occupational Health and Safety Administration) Ed:2007 NIOSH Standards (National Institute of Safety and Health) Ed:2007 ILO Standards (International Labor Office) Ed:2003 WHO Standards (World Health Organization) Ed:2006 OEL Standards Ed: 1998 September Manual Handling Safety Page 15
17 9. APPENDIXES APPENDIX I :Illustrations APPENDIX II : Manual Handling Risk Assessment Table APPENDIX I :Illustrations September Manual Handling Safety Page 16
18 FIGURE 1: MANUAL HANDLING THIS STIFFENS THE LEGS & BACK SO THAT THE FEET DO NOT ADJUST FOR MOVEMENT HANDS HAVE TO REACH OUT EXCESSIVELY ELBOWS JUT OUT FROM THE BODY EXCESSIVE END OF FINGER PRESSURE OCCURS THE LEGS & BACK RELAX FOR MOVEMENT FEET ADJUST TO ALLOW FOLLOW THROUGH WITH LOAD ELBOWS TEND TO REMAIN INTO BODY GOOD HAND HOLD OCCURS September Manual Handling Safety Page 17
19 FIGURE 2: MANUAL HANDLING FIGURE 3: MANUAL HANDLING September Manual Handling Safety Page 18
20 APPENDIX II : Manual Handling Risk Assessment Table Job Description: Area: Unit: Company Name: Position/Job Title: Name: Signature: Date/Time: Yes / No Factors Questions Remark The tasks The loads The working environment Individual capability Other factors Do they involve: - Holding or manipulating loads at distance from trunk? - Unsatisfactory bodily movement or posture, especially: * twisting the trunk? * stooping? * reaching upward? - Excessive movements of loads, especially: * Excessive lifting or lowering distance? * Excessive carrying distances? - Excessive pushing or pulling of loads? - Risk of sudden movement of loads? - Frequent or prolonged physical effort? - Insufficient rest or recovery periods? - A rate of work imposed by a process? Are they: - Heavy? - Bulky or unwieldy? - Difficult to grasp? - Unstable, or with contents likely to shift? - Sharp, hot or otherwise potentially damaging? Are there: - Space restraints preventing good posture? - Uneven, slippery or unstable floors? - Variations in level of floor or work surfaces? - Extremes of temperature or humidity? - Conditions causing ventilation problems or gusts of wind? - Poor lighting conditions? Does the job: - Require unusual strength, height etc? - Create a hazard to those who might reasonably be considered to have a health problem? - Require special information or training for its safe performance? Is movement or posture hindered by personal protective equipment or by clothing? Other Recommendation and Safety Precaution Issued by CONTRACTOR HSE Supervisor : Name : Signature : September Manual Handling Safety Page 19
21 SUGGESTIONS FOR THE POGC MANUAL HANDLING SAFETY PROCEDURE MANAGER, HSE Department Pars Oil & Gas Company Tehran I.R. Iran Please consider the following suggestion(s) relative to the POGC Manual handling safety procedure: (Signature) (Date) (Address) Contact Telephone Number Contact FAX Number September Manual Handling Safety Page 20
Manual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
More informationSAFE MANUAL HANDLING OPERATIONS
SAFE MANUAL HANDLING OPERATIONS STFC Safety Code No 12 Rev. 1.5, Issued August, 2017 Note - This document may have been superseded by a more recent version. Revisions 1 Initial Launch November 2007 1.1
More informationMANUAL HANDLING CODE OF PRACTICE
MANUAL HANDLING CODE OF PRACTICE 1. Introduction For some years national statistics have shown that more than a quarter of accidents reported are associated with the manual handling of loads. Sprains and
More information2.18 Manual Handling Policy and Procedure Table of Contents
Table of Contents Section 1 - Policy... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 Requirements... 3 1.4 Responsibilities... 3 Section 2 - Procedure... 4 Section 3 - References... 9 3.1 Statutory Documents...
More informationOne Direct Manual Handling Guidance
Author Version V1 One Direct Health and Safety Date Issued December 2016 Review Date May 2018 What s the problem? Incorrect manual handling is one of the most common causes of injury at work. It causes
More informationGetting to grips with manual handling
Health and Safety Executive Getting to grips with manual handling A short guide 2 This booklet explains the problems associated with manual handling and sets out best practice in dealing with them. The
More informationManual Handling Risk Assessment Procedure (HS.1.09)
LTD Manual Handling Risk Assessment Procedure () MANUAL HANDLING RISK ASSESSMENT GUIDANCE NOTE Contents Section 1: Introduction Section 2: Risk Assessment Section 3: General Guidelines Section 4: Team
More informationHEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING
HEALTH AND SAFETY GUIDANCE NOTE MANUAL HANDLING INTRODUCTION Manual handling is interpreted as the transporting or supporting of any load (which also includes a person or an animal). It involves a variety
More information1 P a g e. Moving & Handling Procedure. Title: Reference No: Procedure 01. Assistant Chief Officer. Ian Plummer, Health & Safety Manager
Title: Moving & Handling Procedure Reference No: Procedure 01 Owner: Author Assistant Chief Officer Ian Plummer, Health & Safety Manager First Issued On: Latest Issue Date: August 2016 Operational Date:
More informationHealth and Safety Services. Safety Guide 37. Manual Handling. Facilities Management Directorate
Health and Safety Services Safety Guide 37 Manual Handling Facilities Management Directorate Safety Guide 37 Manual Handling Manual Handling Contents Summary... ii Manual handling assessment flow chart...iii
More informationAge Concern Hounslow Manual Handling Risk Assessment PART ONE PRELIMINARY RISK ASSESSMENT
Age Concern Hounslow Manual Handling Risk Assessment PART ONE PRELIMINARY RISK ASSESSMENT This checklist is to be used as a preliminary assessment of the work area. If the answer is yes or possibly, then
More informationManual Tasks Minimum Standard. October, 2014
Manual Tasks Minimum Standard Manual Tasks Minimum Standard October, 2014 Contents 1 Executive Summary... 2 2 More Information... 2 3 Using this Standard... 2 4 Managing Risk... 2 4.1 Consultation... 2
More informationManual handling at work
Manual handling at work A brief guide Introduction This leaflet describes what you, as an employer, may need to do to protect your employees from the risk of injury through manual handling tasks in the
More informationGetting to grips with manual handling A short guide
Getting to grips with manual handling A short guide This booklet explains the problems associated with manual handling and sets out best practice in dealing with them. The advice is intended for managers
More informationThis guidance note gives simple, practical advice on what can be done to eliminate or reduce the risks.
Health and Safety Guidance Note MANUAL HANDLING A guide for Managers, Heads of Departments Introduction Manual handling operations currently account for approximately 35% percent of all reported industrial
More informationCorporate Standard Manual Handling HB#
Contents Contents... 1 Functional Flowchart... 1 Objective... 1 Scope... 1 Definitions... 1 Responsibilities... 2 OH&S Systems Manager... 2 Station / Site Manager... 2 Workers... 2 Hazards... 2 Inspections
More informationHealth & Safety and Employment Law
Health & Safety and Employment Law Manual Handling Health and safety training for employees The definition of Manual Handling The transporting or supporting of a load, including the lifting, putting down,
More informationSafety Toolkit and Short Guide to General Application Regulations 2007 Manual Handling Section. Manual Handling
Manual Handling Section Manual Handling Introduction Safety Toolkit The objective of the Toolkit is to provide guidance on the prevention of accidents or ill health at work and to provide a practical tool
More informationTECHNICAL INFORMATION SHEET 17. Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS
TECHNICAL INFORMATION SHEET 17 Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS Copyright 2016 by British Compressed Gases Association. First printed 2009. All rights reserved.
More informationThe Management of Hazardous Manual Handling Operations. The Management of Health and Safety at Work Regulations
Number MS - 09 The Management of Hazardous Manual Handling Operations Scope Law This document provides the information necessary to identify and manage hazardous manual handling activities. The Management
More informationHealth and Safety Manual Handling Risk Assessment
Health and Safety Manual Handling Risk Assessment 2014 City of Glasgow College Charity Number: SC0 36198 Page 1 of 14 Table of Contents 1. Purpose... 3 2. Scope... 3 3. Responsibility... 3 4. Manual Handling
More informationGUIDELINE for MSD Hazard Control Measures
APPENDIX C GUIDELINE for MSD Hazard Control Measures This MSD Control Measures guideline document will help you eliminate or reduce musculoskeletal disorder hazards identified by the MSD Hazard ID Form.
More informationASSESSING AND CONTROLLING MANUAL HANDLING RISK
ASSESSING AND CONTROLLING MANUAL HANDLING RISK Location of task: Description of manual handling task: Date of assessment: Persons doing assessment: Work area management rep: Work area H&S rep (or deputy):
More informationHorizon Care and Education Group Limited MANUAL HANDLING POLICY
Purpose. The purpose of the policy is outline ensure that Horizon Care and Education Group meets it Health and Safety obligations, under Manual Handling Operations Regulations 1992. Scope The policy applies
More informationManual handling assessment charts (the MAC tool) Introduction DRAFT
Manual handling assessment charts (the MAC tool) This is a web-friendly version of leaflet INDG383(rev1), published 01/14 Introduction Work-related musculoskeletal disorders (MSDs), including manual handling
More informationConstructive Ideas. Assessing the risk of sprains and strains CI Introduction. Step 1: Identify hazards. What is musculoskeletal injury (MSI)?
Constructive Ideas Innovative ideas to reduce soft tissue injuries in the construction in dus try! Assessing the risk of sprains and strains Introduction What is musculoskeletal injury (MSI)? Musculoskeletal
More informationChapter 13: Manual Handling
Chapter 13: Manual Handling Learning Outcomes: 1. Define the term manual handling, 2. Know the activities involve manual handling, 3. Know types of injuries caused by manual handling, 4. Know the risk
More informationManual Handling October 2014
Manual Handling October 2014 How Are We Doing? LTI s 0 in last 12 months Period Location Oil & Gas Base AFR Oil & Gas Sites AFR Total AFR September 0 0 0 12 Month Rolling 0 1.59 1.45 Statistics presented
More informationInjury Prevention and Ergonomics Manual Health & Safety
Rev Document Number Author Approver / BFO Approver Signature Issue Date Page 1 OP-MAN-00041 D Christie-Down Manager Regional 28/06/2018 1 of 14 TABLE OF CONTENTS 1 Purpose and Scope...3 2 Manual Handling...
More informationManual Handling Policy
Manual Handling Policy Version No V1.0 DRAFT Author Date Comments Approved by Bridget Meats 2-10-15 Recommended for Approval by H&S Group V1.0 29-10-15 APPROVED For approval by QRC V2.0 13-10-16 Recommended
More informationList 4 Example Of How Manual Handling Risks Can Be Reduced
List 4 Example Of How Manual Handling Risks Can Be Reduced Risk assessment for reduced handling capacity (staff) So for example a possible risk (2) of a medium severity injury requiring 3 days away from
More informationLEAFLET 4 MANUAL HANDLING
LEAFLET 4 MANUAL HANDLING AMENDMENT RECORD Amnd No Date Text Affected Authority and Date 001 11 May 10 Annex E, para 3 Corrected reference to Annex B SSDC Safety3 11 May 10 REVISION NOTE Leaflet 4, Manual
More informationRisk factors associated with pushing and pulling loads
Risk factors associated with pushing and pulling loads There are a number of risk factors associated with pushing and pulling of loads. To make it easy to remember, it can be broken down to TILE, which
More informationBASICS OF MANUAL HANDLING SAMPLE COURSE HANDBOOK. HSM Safety Management
BASICS OF MANUAL HANDLING COURSE HANDBOOK THIS PAGE INTENTIONALLY LEFT BLANK BASICS OF MANUAL HANDLING COURSE HANDBOOK FIRST EDITION 2011 C. N. PERRY MBA PgD CMIOSH AIIRSM RMaPS NOTE: The legislation and
More informationChapter 13: Manual Handling
Chapter 13: Manual Handling Learning Outcomes: After successful studying this chapter, You should be able to: 1. Define the term manual handling, 2. Know the activities involved in manual handling, 3.
More informationTailgate Topic Review
[PP 03/04/2018-03/17/2018] Lifting/Carrying/MH Lifting/Walking CONSTRUCTION INSPECTOR, 7291 (Specifications) Physical Requirements: Strength to perform average lifting up to 15 pounds and occasionally
More informationMSD Risk Assessment Checklist
MSD Risk Assessment Checklist Purpose This MSD Risk Assessment Checklist is designed to provide you with a relatively quick and easy way to more formally assess the risk associated with exposures to some
More informationPreventing Musculoskeletal Injuries (MSIs) in Manufacturing
7-Step Process to Reduce the Risk of MSI B.C. s Occupational Health and Safety Regulation requires employers to eliminate or, if that is not practicable, minimize the risk of musculoskeletal injury to
More informationRisk Guide: Manual Handling
Risk Guide: Manual Handling Date Description of Original Document/Amendments Prepared/Edited By 11/06/14 Initial Draft Jasmina Lozanovska 17/06/14 Released Version Jasmina Lozanovska 30/09/14 Released
More informationErgonomics: Assessments and Evaluations for Job Improvements. Travis Ellis, CSP, CHMM
AND/OR AND/OR AND = Force Awkward Posture Repetition Long Duration Increased Ergo Risk Ergonomics: Assessments and Evaluations for Job Improvements Travis Ellis, CSP, CHMM Course Objectives: 1. Identify
More informationMSD RISK ASSESSMENT. Risk Factor "Potential Risk" "High Risk" Contact Stress Repetition Grip Force Lift/Lower Force Awkward Posture Vibration WSPS.
Job or Task: Date: Completed by: Once a potential risk of a musculoskeletal disorder (MSD) has been identified, the purpose of this risk assessment is to determine if a high risk of injury exists. We recommend
More informationSAFE HANDLING OF CYLINDERS Information for Customers Handling Gas Cylinders
SAFE HANDLING OF CYLINDERS Information for Customers Handling Gas Cylinders Musculoskeletal disorders (MSDs) are the most common occupational illness in the world; affecting 1.1 million people a year.
More informationSafety Meeting. Meeting Leader Instructions. Safety, Teamwork & Our Customer s 1 st Choice
Meeting Leader Instructions These meetings are more than safety meetings. While they address safety as a top priority, these meetings are also an opportunity for you to interact with your team; a chance
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT AUGER / POST HOLE DIGGER Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationManual Handling - Theory
Manual Handling - Theory Manual Handling can be defined as any transporting, supporting of a load, lifting, pushing, putting down, pulling, carrying or moving of any load. The load includes a person, it
More informationSoteria Strains. Safe Patient Handling and Mobility Program Guide
Soteria Strains Safe Patient Handling and Mobility Program Guide Section 4 Special Considerations Section 4.1 - Emergency Situations V1.0 edited July 20, 2015 A provincial strategy for healthcare workplace
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationCITY AND COUNTY OF DENVER CR&CF RISK UNIT Job Hazard Analysis
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.4.1 Job Hazard Analysis 1.0 Introduction The Job Hazard Analysis (JHA) shall be used to describe task specific hazards and to identify control measures that
More informationOffice Ergonomics Standard
This standard outlines general workstation and work practices to be followed in order to reduce the risk factors for developing musculoskeletal injuries (MSIs) and visual strain from working at computer
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationLow Medium High Critical Business Impact: X Changes are important, but urgent implementation is not required, incorporate into your existing workflow.
Page: 1 of 10 Reviewed: 10/02/2017 Amended: 13/02/2017 CC22 - Moving and Handling Policy and Procedure Category: Care Management Sub-category: Care Practice Policy Review Sheet Review Date: 10/02/17 Policy
More informationEnvironmental Health & Safety Programs
1.0 Introduction Material handling accounts for approximately 25% of all occupational injuries. Common injuries include strains, sprains, fractures, and bruises. The largest number of injuries occur to
More informationNEBOSH International General Certificate Paper-2
A worker is manually loading boxes of components onto metal shelves. Identify FOUR types of injury that the worker could suffer while carrying out this task. (4) The four types of injuries include; spinal
More informationTHE BISHOP POLICE Department is accepting applications for part-time and substitute crossing guards. You must clear a background check.
THE BISHOP POLICE Department is accepting applications for part-time and substitute crossing guards. You must clear a background check. Job consists of 2-3 hrs per school day @ $10.00 per hour. Contact
More informationInduction SGAC - EVENTS -
Induction SGAC - EVENTS - 1 P a g e CONTENTS CONTENTS... 2 WELCOME... 3 VISITING SGAC... 3 EMERGENCY PROCEDURES... 3 Warning Tones:... 4 It Is Important You Know The Location Of:... 4 If You Discover Smoke
More informationWorking Alone Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared
More informationGENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE. St Euphemia College - General Work Health and Safety Checklist
GENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE This document is a summary checklist intended for employees as well as the School executive, and sets out the measures that a PCBU should put in place
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationSAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
More informationManual Handling Risk Assessment In accordance with the Manual Handling Operations Regulations 1992
Ref o MHRA 3.1 Task Carrying Bin Bags Location Bath Area ame of Assessor Simon Foley Job Title Quality Health and Environmental Manager Signature 28 th ovember 2014 Review Details (Reviewed following change
More informationYou must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.
SYDNEY TOWN HALL 1 HIRER & CONTRACTOR SAFETY FACT SHEET Issue 2 September 2013 www.sydneytownhall.com.au City of Sydney - Venue Management will provide and maintain a safe working environment for the health,
More information1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
More informationNIOSH Equation Outputs: Recommended Weight Limit (RWL): Lifting Index (LI):
The NIOSH Equation is a tool used by occupational health and safety professionals to assess the manual material handling risks associated with lifting and lowering tasks in the workplace. This equation
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationMSD HAZARD IDENTIFICATION FORM
MSD HAZARD IDENTIFICATION FORM Job Title Task Assignment Job Code (if used) Essential Safety Resources Location Location of Assessment Identification Applies to the Following Locations Date Completed by
More informationQUEENSLAND UNIVERSITY OF TECHNOLOGY
QUEENSLAND UNIVERSITY OF TECHNOLOGY SITE SPECIFIC SAFETY MANAGEMENT PLAN FOR SAMFORD HOUSE SAMFORD ECOLOGICAL RESEARCH FACILITY SAMFORD VALLEY 2007 Dylan Randall SN: 06305466 dylan.randall@student.qut.edu.au
More informationEmployee: Branch Name: 2) Has Jobsite visit been conducted to gather details, and get photos? Yes/No
Workers Comp Check list Employee: Branch Name: 1) Accident Investigation Report Completed: Yes/No Date Completed: 2) Has Jobsite visit been conducted to gather details, and get photos? Yes/No 3) Employee
More informationGarbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014
Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028 Name Date Signature Author Jarred Hearle 30/11/2014 Reviewed John Nulty 30/11/2014 Approved Geoff Selfe 01/12/2014 Key Safety Acts Complete a 5
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationControl of Vibration at Work
Control of Vibration at Work 1) POLICY University of Glasgow will put in place measures to protect employees from the risks of Hand Arm Vibration Syndrome (HAVS) and Whole Body Vibration. These measures
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationManual handling assessment charts (the MAC tool)
Manual handling assessment charts (the MC tool) Introduction Work-related musculoskeletal disorders (MSDs), including manual handling injuries, are the most common type of occupational ill health in the
More informationManual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift
Manual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift Job Description Gary S. Nelson, Henry Wickes, and Jason T. English Cartons of product are accumulated
More informationSAMPLE MANUAL HANDLING CODE OF PRACTICE
SAMPLE MANUAL HANDLING CODE OF PRACTICE Company: Workplace Address: Introduction This code sets out requirements that this company will follow for the reduction of MSIs due to manual handling at this workplace.
More informationWORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More informationSlips, Trips and Falls
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
More informationHazard Identification and Risk Management
Hazard Identification and Risk Management Australian Workcover Authorities [supported by the Company] currently use a risk management approach in developing their legislative controls. This means that:
More informationBISHOP POLICE DEPARTMENT Communications Operator
BISHOP POLICE DEPARTMENT Communications Operator Definition To receive all incoming calls for emergency and non-emergency assistance and dispatch necessary units; and to perform a variety of general support
More informationAccident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationSafety Services. Local Rules for Safety in Manual Handling Operations
Safety Services Local Rules for Safety in Manual Handling Operations Last Review Date: 10 October 2012 Approved 23 June 2009 CONTENTS 1. Introduction 2. Responsibilities of Heads of Department 3. Responsibilities
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More informationJob: Dock Gantry Operator Description: Operates the Dock Gantry Equipment Assessed: VanTerm Dock Gantry ESSENTIAL DUTIES
Job: Dock Gantry Operator Description: Operates the Dock Gantry Equipment Assessed: VanTerm Dock Gantry ESSETIAL DUTIES 1. Operating the Dock Gantry A) Sitting B) Handling Controls C) Operating Foot Pedals
More informationSection 5: Hazard Identification ( version)
Section 5: Hazard Identification (2010.06.16 version) 5.1 Introduction Purpose The hazard assessment process is a system to identify health hazards, occupational factors or illnesses, arising in and from
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT LOADING AND UNLOADING VEHICLES Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationTHE CONTROLLED COPY OF THIS DOCUMENT IS ON THE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR THE DATE AT THE BOTTOM OF THE PAGE.
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Using Angle Grinders SWMS No. 8 Authorized and email Signed by the
More informationBasic Movement Patterns Locomotor Skills 1.3
Basic Movement Patterns Locomotor Skills 1.3 Jumping Forward & Sideways & Landing Extending Arms upward upon takeoff Arms Reach Full Extension about head height at lift off Extending the Hips, Knees, and
More informationNaval Facilities Engineering Command. Ergonomics Risk Assessment for. Dinghy Retrieval and Storage
Naval Facilities Engineering Command Ergonomics Risk Assessment for Dinghy Retrieval and Storage Introduction This report summarizes the ergonomics risk assessment conducted on November 16 th, 2006. The
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationHazard and Risk Assessment Guide
Page 1 Safety legislation in Canada (Occupational Health & Safety Act, Sec. 25) entails employers to do everything that is reasonable to ensure their workers have a healthy and safe workplace. The first
More informationMeet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
More informationNEW EMPLOYEE ERGONOMIC WORKSHEET
NEW EMPLOYEE ERGONOMIC WORKSHEET DIRECTIONS New Employee: This document has been prepared to assist you and your supervisor in determining some of the items that you may need. After you have had an opportunity
More informationTo secure the health and safety of workers and workplaces; to ensure everyone goes home safely at the end of each day. To set minimum standards for the management of particular hazards where alternative
More informationPromotion of Safety. Chapter 10 Intro to HST
Promotion of Safety Chapter 10 Intro to HST Using Body Mechanics Unit 1 Prevent strain and help maintain muscle strength Prevent injury to yourself and others Reasons for Using Body Mechanics Muscles work
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT WATER PUMP - PETROL Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationJob: Wheat Specialty Description: Loads grain into ships hatches and levels off load Equipment Assessed: AGT semi-automated operation and PECO at JRI
Job: Wheat Specialty Description: Loads grain into ships hatches and levels off load Equipment Assessed: AGT semi-automated operation and PECO at JRI ESSENTIAL DUTIES 1. Loading Grain A. Semi-Automated
More informationProcess Name Material Handling/MSD Prevention Program
CNM WAY PROCESS CNM Process Name Material Hanling/MSD Prevention Program (04/10/2018 Revision) Overview of Material Hanling/MSD Prevention Program Purpose: To provie a safe an healthy working environment
More information