County: Field: Location: Well: Company: Drilling Measured From: API Serial No. KELLY BUSHING KELLY BUSHING. District: Grant.
|
|
- Christopher Freeman
- 5 years ago
- Views:
Transcription
1 Measured Temperature Measured Temperature Source RMF RMC MRT MRT Maximum Recorded Temperatures Circulation Stopped Time Logger On Bottom Time Unit Number Location Recorded By Witnessed By Kevin Stiles 346 Weston, WV Michael Winter 31 Aug 21 @ MUD Fluid Loss PH Source Of Sample Measured Temperature Density Viscosity Logging Date Run Number Depth Driller Schlumberger Depth Bottom Log Interval Top Log Interval Casing Driller Depth Casing Schlumberger Bit Size Type Fluid In Hole 2762 ft 8.75 in Air lbm/gal 2762 ft Aug ft 7346 ft 7338 ft County: Field: Location: Well: Company: API Serial No District: Grant Watershed: Trib of Wyatt Run Quad: Pine Grove 7.5 Drilling Measured From: KELLY BUSHING Wetzel Heather LAT: * Mills Wetzel #1H Stone Energy Corporation LOCATION Log Measured From: KELLY BUSHING 1. ft above Perm. Datum Permanent Datum: GROUND LEVEL Elev.: ft D.F ft LONG: * G.L ft LAT: * Elev.: K.B ft GAMMA RAY / CALIPER ARRAY INDUCTION PLATFORM EXPRESS Well: Field: County: Mills Wetzel #1H Heather Wetzel State: West Virginia Company: Stone Energy Corporation Measured Temperature Measured Temperature Source RMF RMC MRT MRT Maximum Recorded Temperatures Circulation Stopped Time Logger On Bottom Time Unit Number Location Recorded By Witnessed By MUD Fluid Loss PH Source Of Sample Measured Temperature Density Viscosity Logging Date Run Number Depth Driller Schlumberger Depth Bottom Log Interval Top Log Interval Casing Driller Depth Casing Schlumberger Bit Size Type Fluid In Hole Run 1 Run
2 3 DEPTH SUMMARY LISTING Date Created: 31 AUG 21 3:48:51 Depth System Equipment Depth Measuring Device Type: IDW B Serial Number: 2844 Calibration Date: 3 MAR 21 Calibrator Serial Number: 33 Calibration Cable Type: 7 39P LXS Wheel Correction 1: 1 Wheel Correction 2: 9 Tension Device Logging Cable Type: CMTD B/A Type: 7 39P LXS Serial Number: 1883 Serial Number: Calibration Date: 11 AUG 21 Length: 157 FT Calibrator Serial Number: Conveyance Method: Wireline Number of Calibration Points: 1 Rig Type: LAND Calibration RMS: 14 Calibration Peak Error: 26 Depth Control Parameters Log Sequence: Rig Up Length At Surface: Rig Up Length At Bottom: Rig Up Length Correction: Stretch Correction: Tool Zero Check At Surface: First Log In the Well FT FT. FT. FT 33.1 FT 1. ALL SCHLUMBERGER DEPTH CONTROL POLICIES FOLLOWED 2. IDW IS PRIMARY DEPTH CONTROL 3. Z CHART IS SECONDARY DEPTH CONTROL Depth Control Remarks DISCLAIMER THE USE OF AND RELIANCE UPON THIS RECORDED DATA BY THE HEREIN NAMED COMPANY (AND ANY OF ITS AFFILIATES, PARTNERS, REPRESENTATIVES, AGENTS, CONSULTANTS AND EMPLOYEES) IS SUBJECT TO THE TERMS AND CONDITIONS AGREED UPON BETWEEN SCHLUMBERGER AND THE COMPANY, INCLUDING: (a) RESTRICTIONS ON USE OF THE RECORDED DATA; (b) DISCLAIMERS AND WAIVERS OF WARRANTIES AND REPRESENTATIONS REGARDING COMPANY S USE OF AND RELIANCE UPON THE RECORDED DATA; AND (c) CUSTOMER S FULL AND SOLE RESPONSIBILITY FOR ANY INFERENCE DRAWN OR DECISION MADE IN CONNECTION WITH THE USE OF THIS RECORDED DATA. OTHER SERVICES1 OTHER SERVICES2 OS1: TLD OS1: OS2: CNTG OS2: OS3: TEMP/AUDIO OS3: OS4: ECS OS4: OS5: OS5: REMARKS: RUN NUMBER 1 REMARKS: RUN NUMBER 2 PRESENTATION AS PER CLIENT REQUEST TOOLS RUN AS PER TOOL SKETCH SCHLUMBERGER FIRST RUN DEPTH CONTROL POLICY FOLLOWED MATRIX = LIMESTONE MATRIX DENSITY = 2.68 g/cc
3 THANK YOU FOR CHOOSING SCHLUMBERGER WIRELINE! YOUR CREW TODAY: J. MOORE AND J. BUSH RUN 1 RUN 2 SERVICE ORDER #: BEUA 14 SERVICE ORDER #: PROGRAM VERSION: 17C 154 PROGRAM VERSION: FLUID LEVEL: FLUID LEVEL: LOGGED INTERVAL START STOP LOGGED INTERVAL START STOP GSR U/Y WITM (DTS) A EQUIPMENT DESCRIPTION RUN 1 RUN 2 SURFACE EQUIPMENT CNB AB NCT B NCS VB GSR U/Y SURFACE EQUIPMENT WITM (DTS) A DOWNHOLE EQUIPMENT DOWNHOLE EQUIPMENT LEH QT LEH QT 36.2 LEH QT LEH QT 42.2 DTC H ECH KC 6371 DTCH A 8461 DTCH1 A SGT N SGH K SGC TB SGD TAB CTEM TelStatus ToolStatu Gamma Ray DTC H ECH KC 6371 DTCH A 8461 DTCH1 A SGT N SGH K SGC TB SGD TAB CTEM TelStatus ToolStatu Gamma Ray AGDT2 AA AGDT2 AA 25 AGDT2 Tem AGDT2 Aud DTA A ECH KE 8226 DTA A AGDT AA AGDT AA 26 AGDT Temp AGDT Audi CNT G CND NA NLS KL NSR F 3116 CNC GA 5 CNH G 468 BOW SPR NPV N 26.8 CFTC CNTC CNEC CFEC AIT M 16.
4 AMIS A 275 AMRM A IN Standoff Induction Temperatu Power Sup IN Standoff HILTH FTB HTBCD H 3779 HMCA H HRCC H 4317 HRMS H 489 HRGD H 4882 GLS VJ 543 MCFL Device H HILT Nucl. LS H 13 HILT Nucl. SS H HILT Nucl. BS H 4117 HMCA HRCC cart MCFL HILT cali HRDD LS HRDD SS HRDD BS SP SENSOR DF Mud Resis HV Tension TOOL ZERO.1. BNS CCS HMAS HV DF Tension HTEN TOOL ZERO..5 MAXIMUM STRING DIAMETER 6.88 IN MEASUREMENTS RELATIVE TO TOOL ZERO ALL LENGTHS IN FEET MAXIMUM STRING DIAMETER 4.63 IN MEASUREMENTS RELATIVE TO TOOL ZERO ALL LENGTHS IN FEET MAIN PASS 2 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5: FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5: FT 19.5 FT Integrated Hole/Cement Volume Summary Hole Volume = F3 Cement Volume = F3 (assuming 5.5 IN casing O.D.) Computed from FT to FT using data channel(s) HCAL OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3
5 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM)
6
7
8
9
10 27 CSG 28 TENS 29 HCAL GR 3 AT9 AT
11 TENS 37 HCAL GR
12 38 AT9 AT
13 TENS HCAL 44 AT9 AT
14 49 TENS HCAL 5 AT9 AT
15 TENS HCAL 58 GR AT9 AT6 59
16 TENS HCAL 65
17 AT9 AT
18 TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223 ACDE Array Induction Casing Detection Enable No ACEN Array Induction Tool Centering Flag (in Borehole) Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution AIGS Array Induction Select Akima Interpolation Gating On
19 AMRF AORSV Array Induction Mud Resistivity Factor Array Induction Response Set Version for One ft Resolution ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_MAIN_2 Vertical Scale: 2" per 1 Graphics File Created: 31 Aug 21 5:58 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5: FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58
20 MAIN PASS 5 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5: FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5: FT 19.5 FT Integrated Hole/Cement Volume Summary Hole Volume = F3 Cement Volume = F3 (assuming 5.5 IN casing O.D.) Computed from FT to FT using data channel(s) HCAL OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM) 2
21 1 2
22 3 4 5
23 6 7
24 8 9
25 1 11
26 12 13
27
28 17 18
29 19 2
30 21 22
31 23 24
32
33 CSG 28 29
34 TENS 3 HCAL GR AT9 AT6 31
35 32 33
36 34 35
37 36 37 TENS 38
38 HCAL GR AT9 AT6 39 4
39 41 42
40 43 44 TENS HCAL
41 AT9 AT
42
43 5 TENS HCAL GR 51 AT9 AT6
44 52 53
45 54 55
46 56 57
47 58 TENS HCAL GR 59 AT9 AT6 6
48 61 62
49 63 64
50 65 TENS HCAL 66 AT9 AT6
51 67 68
52
53 72 73 < FR GR
54 FR RES > TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223 ACDE Array Induction Casing Detection Enable No ACEN Array Induction Tool Centering Flag (in Borehole) Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution AIGS Array Induction Select Akima Interpolation Gating On AMRF Array Induction Mud Resistivity Factor 1 AORSV Array Induction Response Set Version for One ft Resolution ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE
55 SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_MAIN_5 Vertical Scale: 5" per 1 Graphics File Created: 31 Aug 21 5:58 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5: FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58 REPEAT PASS 5 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_14 FN:1 PRODUCER 31 Aug 21 5: FT FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_18PUP FN:15 PRODUCER 31 Aug 21 5: FT 787. FT Integrated Hole/Cement Volume Summary Hole Volume = F3 Cement Volume = 84.1 F3 (assuming 5.5 IN casing O.D.) Computed from FT to FT using data channel(s) HCAL
56 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM)
57 73 TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223
58 ACDE ACEN Array Induction Casing Detection Enable Array Induction Tool Centering Flag (in Borehole) No Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution AIGS Array Induction Select Akima Interpolation Gating On AMRF Array Induction Mud Resistivity Factor 1 AORSV Array Induction Response Set Version for One ft Resolution ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_REPEAT Vertical Scale: 5" per 1 Graphics File Created: 31 Aug 21 5:51 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_14 FN:1 PRODUCER 31 Aug 21 5: FT FT
59 Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_18PUP FN:15 PRODUCER 31 Aug 21 5:51 CALIBRATIONS MAXIS Field Log Calibration and Check Summary Measurement Nominal Master Before After Change Limit Units Array Induction Tool M Wellsite Calibration Electronics Calibration Check Thru Cal Mag. & Phase Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Magnitude N/A N/A N/A V Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Thru Cal Phase N/A N/A N/A DEG Array Induction Tool M Wellsite Calibration Electronics Calibration Check Auxiliary Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Array Induction SPA Plus N/A N/A N/A MV Array Induction SPA Zero N/A N/A N/A MV Array Induction Temperature Pl N/A N/A N/A V Array Induction Temperature Ze N/A N/A N/A V Array Induction Tool M Wellsite Calibration Test Loop Gain Correction Master: Calibration out of date 28 Nov 29 22:22 Test Loop Gain Correctio 1.12 N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio N/A N/A N/A N/A V Test Loop Gain Correctio.712 N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Test Loop Gain Correctio N/A N/A N/A N/A DEG Array Induction Tool M Wellsite Calibration Sonde Error Correction Master: Calibration out of date 28 Nov 29 22:22 R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M
60 R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M R Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M X Sonde Error Correction N/A N/A N/A N/A MM/M Array Induction Tool M Wellsite Calibration Mud Gain Correction Master: Calibration out of date 28 Nov 29 22:22 Coarse Mag, Real, Imag N/A N/A N/A N/A Coarse Mag, Real, Imag N/A N/A N/A N/A Coarse Mag, Real, Imag N/A N/A N/A N/A Fine Mag, Real, Imag N/A N/A N/A N/A Fine Mag, Real, Imag N/A N/A N/A N/A Fine Mag, Real, Imag N/A N/A N/A N/A Scintillation Gamma Ray Tool N Wellsite Calibration Detector Calibration Before: 29 Aug 21 12:38 Gamma Ray (Jig Bkg) N/A N/A N/A 14.8 GAPI Gamma Ray (Calibrated) 165. N/A 165. N/A N/A 15. GAPI Array Induction Tool M / Equipment Identification Primary Equipment: Rm/SP Bottom Nose AMRM A 275 Array Induction Sonde AMIS A 275 Auxiliary Equipment: Array Induction Tool M Wellsite Calibration Electronics Calibration Check Thru Cal Mag. & Phase Idx Phase Value Thru Cal Magnitude V Nominal Value Thru Cal Phase DEG Nominal Master Before Master Before Master Before Master Before Master Before Master Before Master Before Master Before % 14. % Nom 6. Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Nom + 6. Phase Array Induction Tool M Wellsite Calibration Electronics Calibration Check Auxiliary Array Induction SPA Plus MV Value Phase Array Induction SPA Zero MV Value Master Master.1595
61 Before Before Phase Array Induction Temperature Plus V 14 Value 5. Phase Array Induction Temperature Zero V 5. Value Master.9135 Master.162 Before.9138 Before Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4.5 Idx Value 1.12 Array Induction Tool M Wellsite Calibration Test Loop Gain Correction Test Loop Gain Correction Magnitude V Value Test Loop Gain Correction Phase DEG Master: Calibration out of date 28 Nov 29 22:22 Idx Value Array Induction Tool M Wellsite Calibration Sonde Error Correction R Sonde Error Correction MM/M Value X Sonde Error Correction MM/M
62 5. Master: Calibration out of date 28 Nov 29 22: Array Induction Tool M Wellsite Calibration Mud Gain Correction Idx Value Coarse Mag, Real, Imag Value Fine Mag, Real, Imag Master: Calibration out of date 28 Nov 29 22:22 Array Induction Tool M Master Calibration Electronics Calibration Check Thru Cal Mag. & Phase Idx Phase Value Thru Cal Magnitude V Nominal Value Thru Cal Phase DEG Nominal Master Master Master Master Master Master Master Master % 14. % Nom 6. Nom + 6. Master: Calibration out of date 28 Nov 29 22:22 Phase Array Induction Tool M Master Calibration Electronics Calibration Check Auxiliary Array Induction SPA Plus MV Value Phase Array Induction SPA Zero MV Value Master Master Phase Array Induction Temperature Plus V 14 Value 5. Phase Array Induction Temperature Zero V 5. Value Master.9135 Master Master: Calibration out of date 28 Nov 29 22:22 Idx Value 1.12 Array Induction Tool M Master Calibration Test Loop Gain Correction Test Loop Gain Correction Magnitude V Value Test Loop Gain Correction Phase DEG
63 Master: Calibration out of date 28 Nov 29 22:22 Idx Value Array Induction Tool M Master Calibration Sonde Error Correction R Sonde Error Correction MM/M Value X Sonde Error Correction MM/M Master: Calibration out of date 28 Nov 29 22:22 Array Induction Tool M Master Calibration Mud Gain Correction Idx Value Coarse Mag, Real, Imag Value Fine Mag, Real, Imag Master: Calibration out of date 28 Nov 29 22:22 Scintillation Gamma Ray Tool N / Equipment Identification Primary Equipment: Scintillation Gamma Cartridge Scintillation Gamma Detector Auxiliary Equipment: Scintillation Gamma Housing Gamma Source Radioactive SGC TB SGD TAB SGH K GSR U/Y Scintillation Gamma Ray Tool N Wellsite Calibration
64 Phase Gamma Ray Background GAPI Value Phase Before 3.64 Before Detector Calibration Gamma Ray (Jig Bkg) GAPI Value Phase Gamma Ray (Calibrated) GAPI Value Before Before: 29 Aug 21 12:38 DTS Telemetry Tool / Equipment Identification Primary Equipment: DTC H Auxiliary Cartridge DTCH A DTC H Telemetry Cartridge DTCH A 8461 Auxiliary Equipment: DTCH Telemetry Cartridge Housing ECH KC 6371 Company: Well: Field: County: State: Stone Energy Corporation Mills Wetzel #1H Heather Wetzel West Virginia PLATFORM EXPRESS ARRAY INDUCTION GAMMA RAY / CALIPER
Location: MUD Density. Province: Field: Location: Well: Company: Newfoundland Undefined UTM (NAD 27) Storm #1 Vulcan Minerals Inc.
RMF Measured Temperature RMC Measured Temperature Source RMF RMC RM MRT RMF MRT Recorded Temperatures Circulation Stopped Time Logger On Bottom Time Unit Number Location Recorded By Witnessed By Karla
More informationLamont Doherty. Expedition 330 Site U1376A. Louisville Seamounts. Company: Well: Field: Phasor Induction. Natural Gamma Ray.
Run 1 Run 2 Run Company: Lamont Doherty Well: Field: Rig: Expedition 33 Site U1376A Louisville Seamounts JOIDES Resolution Ocean: Phasor Induction Pacific JOIDES Resolution Louisville Seamounts Latitude:
More informationLamont Doherty. Expedition 330 Site U1374A. Louisville Seamounts. Company: Well: Field: Phasor. Induction Natural Gamma Ray.
Run 1 Run 2 Run Company: Lamont Doherty Well: Field: Rig: Expedition 33 Site U1374A Louisville Seamounts JOIDES Resolution Ocean: Phasor Pacific JOIDES Resolution Louisville Seamounts Latitude: S 28* 35.75
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 102948 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationLamont Doherty. Expedition 335 Site U1256D. Superfast Spreading Crust IV. Pacific Ocean. Company: Well: Field: Hostile Litho Density
Run 1 Run 2 Run Company: Lamont Doherty Well: Field: Rig: Expedition 335 Site U1256D Superfast Spreading Crust IV Joides Resolution Ocean: Hostile Litho Density Pacific Ocean Joides Resolution Superfast
More informationDepth - Driller COMPANY VAL ENERGY INC. BROWN-ROLFE 3-26 FIELD COUNTY GROUND LEVEL. , 11.0 ft above perm. Datum. Elev.: K.B ft
Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation Rm BHT Source Rmf Rmc Rmc Meas. Temperature Rmf Meas. Temperature Rm Meas. Temperature Source of
More informationHRLA High-Resolution Laterolog Array Tool. Improving the accuracy of Rt
HRLA High-Resolution Laterolog Array Tool Improving the accuracy of Rt Applications Resistivity determination in conductive mud systems Thin-bed evaluation Invasion characterization for permeability indication
More informationNew power in production logging
New power in production logging Locating the zones where fluids enter the wellbore in a producing or injecting well is an important aspect of production logging. It is relatively straightforward to establish
More informationPowerDrive X6. Rotary Steerable System for high-performance drilling and accurate wellbore placement
Rotary Steerable System for high-performance drilling and accurate wellbore placement The PowerDrive X6 RSS maintains control under the most difficult conditions, bringing the benefits of rotary steerable
More informationFlow Scanner. Production logging in multiphase horizontal wells
Flow Scanner Production logging in multiphase horizontal wells Applications Multiphase flow profiling in nonvertical wells Identification of fluid and gas entries in multiphase well or liquid in gas wells
More informationOIL/GAS WELL COMPLETION REPORT. Well Name and Number Surveyed elevation (feet): KB GL
1800 Washingn Blvd. Baltimore Maryland 21230 OIL/GAS WELL COMPLETION REPORT Permit No. Name of Operar Address Well Name and Number Surveyed elevation (feet): KB GL Well Location Field (If wildcat, so state)
More informationCased-Hole Logging Environment
Cased-Hole Logging Environment 2 Planning a Production Logging Job Planning is an important part of a production logging job. Frequently these jobs can only be done in safety during daylight. Thus, the
More informationFORMATION TESTER MOBILITY. Lachlan Finlayson, Chief Petrophysicist Petrofac Engineering & Production Services Engineering Services Consultancy
FORMATION TESTER MOBILITY Lachlan Finlayson, Chief Petrophysicist Petrofac Engineering & Production Services Engineering Services Consultancy 1 Introduction Petrofac Formation Testers Pretest Procedure
More informationWell Integrity Log Interpretation (Magnetic Thickness Detector and 56-Arm Multi-Finger Caliper)
Well Integrity Log Interpretation (Magnetic Thickness Detector and 56-Arm Multi-Finger Caliper) Company: Well: Field: Province: Alberta Country: Canada License: UWI: Logging Date: 21-Mar-2015 Report Date:
More informationCOPYRIGHT. Production Logging Flowmeter Survey Solution Guide
Production Logging Flowmeter Survey Solution Guide Applying Slippage & Liquid Holdup equations, solve for Q oil and Q water at 6130 ft and 6216 ft @ 6130 ft, the % ratio of flow is about 100 %, or 9190
More informationOverview. 2 Module 13: Advanced Data Processing
2 Module 13: Advanced Data Processing Overview This section of the course covers advanced data processing when profiling. We will discuss the removal of the fairly gross effects of ship heave and talk
More informationHydraulic Optimization Worksheet for MS Excel All Versions subsequent to 5.0
Hydraulic Optimization Worksheet for MS Excel All Versions subsequent to 5.0 1. Introduction. 2. Data Input. Header. Bit Information. Mud Information. Casing Program. P.D.M./Turbine. Drill String Design.
More informationD & V Oil Co. LP. Daily Completion Report - University CN A #6 API # /23/2016. Perfs ' ' Activity :
Daily Completion Report - University CN A #6 API # 42-105-42334 12/23/2016 Activity at Report Time: Perfs - 2512' - 2632' Depth at Report Time Put Well on Production 2655' - PBTD Activity : Arrive Location.
More informationAdvanced Applications of Wireline Cased-Hole Formation Testers. Adriaan Gisolf, Vladislav Achourov, Mario Ardila, Schlumberger
Advanced Applications of Wireline Cased-Hole Formation Testers Adriaan Gisolf, Vladislav Achourov, Mario Ardila, Schlumberger Agenda Introduction to Cased Hole Formation tester Tool specifications Applications
More informationBLACK HILLS PLATEAU PRODUCTION COMPANY
BLACK HILLS PLATEAU PRODUCTION COMPANY DRILLING PROGRAM Homer Deep Unit 9 11CH SHL: 300 FNL, 200 FWL, NWNW Sect. 9 T8S R98W BHL: 1350 FSL, 2100 FEL NWSE Sect. 15 T8S R98W Garfield & Mesa Counties, Colorado
More informationGeoNeurale. Testing, Testing 1,2,3. GeoNeurale. by Gene Ballay PART 1. Lichtenbergstrasse Munich Garching
GeoNeurale Testing, Testing 1,2,3 by Gene Ballay PART 1 GeoNeurale Lichtenbergstrasse 8 85748 Munich Garching www.geoneurale.com Fluid Pressures and Capillary Pressure Fluid pressure gradients, and the
More informationFIG: 27.1 Tool String
Bring up Radioactive Tracer service. Click Acquisition Box - Edit - Tool String Edit the tool string as necessary to reflect the tool string being run. This is important to insure proper offsets, filters,
More informationBasic Well Log Interpretation
PDHonline Course K132 (3 PDH) Basic Well Log Interpretation Instructor: Joshua Cook, P.E. 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org
More informationComparative temperature measurements in an experimental borehole heat exchanger. Vincent Badoux 1, Rita Kobler 2
European Geothermal Congress 2016 Strasbourg, France, 19-24 Sept 2016 Comparative temperature measurements in an experimental borehole heat exchanger Vincent Badoux 1, Rita Kobler 2 1 GEOTEST AG, Bernstrasse
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More informationDM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationRiver Bridge - Test Shaft-1 Clarke County, MS, 4/2/2012
Page 1 of 9 The enclosed report contains the data and analysis summary for the SoniCaliper shaft caliper, performed at River Bridge (Test Shaft-1), Clarke County, MS on Monday, April 02, 2012 by Dave Jakstis.
More informationETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationAPPENDIX A1 - Drilling and completion work programme
APPENDIX A1 - Drilling and completion work programme Information about the well and drilling To the extent possible, the international system of units (SI) should be adhered to, and the drilling programme
More informationAlong-string pressure, temperature measurements hold revolutionary promise for downhole management
Along-string pressure, temperature measurements hold revolutionary promise for downhole management IT S WIDELY KNOWN that the majority of stuck pipe incidents occur while pulling out of hole. If we can
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationSensoric 4-20 ma Transmitter Board Operation Manual
Sensoric 4-20 ma Transmitter Board Operation Manual 1 Content Features Operation Manual Technical Data Mechanical Dimensions Remarks & Contact information 2 Features Soldered sensor cell (non replaceable)
More informationQ2: Which instruments are necessary for monitoring the groundwater level?
Micro-Diver 1. Q: What do Divers actually do? 2. Q: Which instruments are necessary for monitoring the groundwater level? 3. Q: Can I place the Diver close to an electrical pump? 4. Q: How should I install
More informationBIT User Manual. 1. About this manual. 2. Know your BIT 1.1. WARNING System Components
BIT User Manual About this manual WARNING Know your BIT System Components Operation Methods Maintenance, charging 3.3.1. Cleaning General handling Software Setup Calibrating the BIT Inclinometer calibration
More informationAnalysis of 24-Hour Pump Test in Well NC-EWDP-3S, Near Yucca Mountain, Nevada
Analysis of 24-Hour Pump Test in Well NC-EWDP-3S, Near Yucca Mountain, Nevada Prepared for: Nye County Department of Natural Resources and Federal Facilities, Nuclear Waste Repository Project Office, Grant
More informationIADC/SPE Innovative Tubular, Hoisting, and Deepwater Rig Designs Extend Hook Load Envelope to 2,000,000 Pounds
IADC/SPE151140 Innovative Tubular, Hoisting, and Deepwater Rig Designs Extend Hook Load Envelope to 2,000,000 Pounds J. N. Brock, R. B. Chandler, NOV Grant Prideco; C. Selen, Maersk Drilling USA; J. Dugas,
More informationRig Math. Page 1.
Page 1 The Calculator and Main Keyboard Display Numerical 10-key pad used for entering numerical values Trigonometric Functions These keys will be used where wellbore angle is an issue These are the keys
More information4 RESERVOIR ENGINEERING
4 RESERVOIR ENGINEERING This chapter summarizes the reservoir engineering data and analysis used in the development of the Depletion Plan for the White Rose Field. The data were derived from seismic and
More informationReducing Nonproductive Time
Reducing Nonproductive Time Pipe Recovery Services Solving challenges. Pipe Recovery Services Pipe Recovery Services Halliburton offers a wide range of free point indicators, severing tools and experienced
More informationOxygen Meter User Manual
Oxygen Meter User Manual Monday, July 23, 2007 1. Outline...2 2. Program...3 2.1. Environment for program execution...3 2.2. Installation...3 2.3. Un installation...3 2.4. USB driver installation...3 2.5.
More informationDataCan. Linewise System. Description. Hardware. Applications
Linewise System Description The Linewise System is a basic acquisition system comprised of hardware and software that records and displays simple process measurements. Examples of these include: depth,
More informationChapter 5 HORIZONTAL DRILLING
Chapter 5 HORIZONTAL DRILLING Chapter 5 How much money am I about to put on the table for a horizontal well? Did I do sufficient planning? Keys to Successful Horizontal Wells Multi-disciplined teams working
More informationOCEAN DRILLING PROGRAM
BIH OCEAN DRILLING PROGRAM www.oceandrilling.org Scientifi c Application Packers A packer is an inflatable rubber element that inflates to seal the annular space between the drill string and the borehole
More informationWL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination
WL16 WATER LEVEL LOGGERS Submersible pressure transducer and USB datalogger combination Warning: Non-vented water level loggers may have readings with errors of up to 250mm due to barometric pressure changes.
More informationStadium Project - DP-70 Atlanta, GA, 9/30/2014
Page 1 of 13 The enclosed report contains the data and analysis summary for the SoniCaliper shaft caliper, performed at Stadium Project (DP-70), Atlanta, GA on Tuesday, September 30, 2014 by Chris Kohlhof.
More informationDepth - Driller COMPANY MCCOY PETROLEUM CORP SCHMIDT C 4-29 FIELD COUNTY GROUND LEVEL. , 13.0 ft above perm. Datum. Elev.: K.B ft
Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation Rm @ BHT Source Rmf Rmc Rmc @ Meas. Temperature Rmf @ Meas. Temperature Rm @ Meas. Temperature Source
More informationPITFALLS OF RUNNING CONVENTIONAL PRODUCTION LOGGING IN HORIZONTAL/HIGHLY DEVIATED WELLS: A CASE STUDY
PITFALLS OF RUNNING CONVENTIONAL PRODUCTION LOGGING IN HORIZONTAL/HIGHLY DEVIATED WELLS: A CASE STUDY Waqar Khan, Venkataraman Jambunathan, and Luis Quintero, Halliburton Copyright 2015, held jointly by
More informationFormation Pressure Testers, Back to Basics. Mike Millar
Formation Pressure Testers, Back to Basics. A review of the acquisition, quality control and use of formation pressures. Mike Millar LPS Seminar - Everything Formation Testing Thursday 14th December 2017
More informationECD Reduction Tool. R. K. Bansal, Brian Grayson, Jim Stanley Control Pressure Drilling & Testing
ECD Reduction Tool R. K. Bansal, Brian Grayson, Jim Stanley Control Pressure Drilling & Testing Drilling Engineering Association, Fourth Quarter Meeting November 20, 2008 1 Presentation outline Description
More informationGEOTHERMAL WELL COMPLETION TESTS
GEOTHERMAL WELL COMPLETION TESTS Hagen Hole Geothermal Consultants NZ Ltd., Birkenhead, Auckland, New Zealand. ABSTRACT This paper reviews the measurements that are typically made in a well immediately
More informationInstructions for SMV 3000 Multivariable Configuration (MC) Data Sheets
Instructions for SMV 3000 Multivariable Configuration (MC) Data Sheets Similar to the TC option for ST 3000 transmitters, the MC option for the SMV 3000 provides a service to our customers which results
More informationOffshore Managed Pressure Drilling Experiences in Asia Pacific. SPE paper
Offshore Managed Pressure Drilling Experiences in Asia Pacific SPE paper 119875 Authors: Steve Nas, Shaun Toralde, Chad Wuest, SPE, Weatherford Solutions Sdn Bhd, SPE, Weatherford Indonesia SPE, Weatherford
More informationNEW PROGRAM! OIL AND GAS TECHNOLOGY PROGRAM
NEW PROGRAM! PROGRAM Mechanical Maintenance MODEL H-IRT-1 Industrial Refrigeration Trainer MODEL H-RIG-1C Rigging Systems Trainer MODEL H-IMTS-1 Industrial Maintenance Training System MODEL H-FP-223-14
More informationMoyno ERT Power Sections. Operational Guidelines
Moyno ERT Power Sections Operational Guidelines Moyno ERT Power Section Operational Guidelines Index 1. Introduction... 3 2. ERT Performance Graph Interpretation... 3 3. Elastomer Compression (Fit) Recommendations...
More informationCOPYRIGHT. Production Logging Fundamentals. By the end of this lesson, you will be able to:
Production Logging Fundamentals Learning Objectives Production Logging Fundamentals By the end of this lesson, you will be able to: Demonstrate the principles and operation of the logging tools associated
More informationD DAVID PUBLISHING. Gas Ratio Analysis in Hovsan Oil Field. 1. Introduction 1. Samir Hashimov
Journal of Geological Resource and Engineering 1 (2015) 42-48 doi:10.17265/2328-2193/2015.01.006 D DAVID PUBLISHING Samir Hashimov Department of Lithology, Mineralogy and Petrography, The Azerbaijan State
More informationHOBO MX Water Level Logger (MX2001-0x) Manual
HOBO MX Water Level Logger (MX2001-0x) Manual HOBO MX Water Level Logger Models: MX2001-01 or MX2001-01-Ti (Titanium), 9-meter/30-foot depth) MX2001-02, 30-meter/100-foot depth MX2001-03, 76-meter/250-foot
More informationSituated 250km from Muscat in
CYAN MAGENTA YELLOW BLACK GRAVITY GAINS A novel method of determining gas saturation has proved successful in Oman s Natih Field where conventional methods were giving anomalous results in difficult conditions.
More informationSTIPumpCard. User Manual
STIPumpCard User Manual Contents 1. Introduction...1 1.1. What is STIPumpCard?... 1 1.2. Main User Interface... 2 2. Input Parameters...4 2.1. Project... 4 2.2. Simulation Settings GroupBox... 4 2.3. Pump
More informationBUYER S GUIDE AQUAlogger 530WTD
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 530WTD Wireless Temperature and Depth Logger AQUAlogger 530WTD The AQUAlogger 530WTD has an innovative design that includes the ability to transfer stored
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 16947 Status: Submitted RAILROAD COMMISSION OF TEAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationDEVELOPMENT OF AN ELECTRONIC MEMORY TOOL FOR LOGGING GEOTHERMAL TEMPERATURE AND PRESSURE PROFILES
47 Proceedings 18th NZ Geothermal Workshop 1996 DEVELOPMENT OF AN ELECTRONIC MEMORY TOOL FOR LOGGING GEOTHERMAL TEMPERATURE AND PRESSURE PROFILES S.M. R~THLISBERGER~, A.H. SPINKS' AND P. BIXLEY~ 1 Spinks
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 10/13/2015
More informationCHDT Cased Hole Dynamics Tester. Pressure testing and sampling in cased wells
CHDT Cased Hole Dynamics Tester testing and sampling in cased wells Applications Evaluation of old wells for bypassed hydrocarbons Development of critical economic data for well evaluation Reduced-risk
More informationPRESENTATION TITLE. DwpD field results Harald Bolt. Industry Steering Committee on Wellbore Survey Accuracy
1 PRESENTATION TITLE Industry Steering Committee on Wellbore Survey Accuracy What Wellbore Depth Positioning? More Technical accurate Section Driller s Depth DwpD field results Harald Bolt Speaker Information
More informationDQM Annual Hopper QA Checks
DQM Annual Hopper QA Checks The following document is intended to be a guide for conducting annual Dredge Quality Management quality assurance checks on hopper dredges. The procedures should provide general
More informationOxyScan Graphic. Operating Instructions. UMS Micro-oxygen sensor 501. Microprocessor instrument
OxyScan Graphic Operating Instructions UMS Micro-oxygen sensor 501 Microprocessor instrument Introduction Thank you for choosing the UMS Micro Oxygen Sensor 501 - a highly advanced product! Please read
More informationRev. IR. Release Date: Aug 1, 2017 CANCELLATION DATE: Aug 8, Smithwood Rd. Liberty, NC Ph or
6120 Smithwood Rd. Liberty, NC 27298 Ph. 336-685-0078 or 800-762-0844 Rev. IR Release Date: Aug 1, 2017 CANCELLATION DATE: Aug 8, 2017 SUBJECT: INSPECT OR REPLACE ALL PMA PRODUCTS, INC. CONTROL SHAFT UNIVERSALS,
More informationRMAG, Snowbird, UT, October 6-9, Michael Holmes, Antony M. Holmes, and Dominic I. Holmes, Digital Formation, Inc.
RMAG, Snowbird, UT, October 6-9, 2007 A METHOD TO QUANTIFY GAS SATURATION IN GAS/WATER SYSTEMS, USING DENSITY AND NEUTRON LOGS INTERPRETATION OF RESERVOIR PROPERTIES WHEN COMPARED WITH GAS SATURATIONS
More informationDepth - Driller COMPANY HILL TRUST 7-20 FIELD COUNTY. , 14.0 ft above perm. Datum. Elev.: K.B ft ft. Fold here
Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation Rm @ BHT Source Rmf Rmc Rmc @ Meas. Temperature Rmf @ Meas. Temperature Rm @ Meas. Temperature Source
More informationSCHEINWORKS Measuring and Analysis Systems by
Pressure Measurement Systems for standing and walking analysis Germany since 1879 Pressure Measurement Systems for standing and walking analysis Documentation of Gait image Stance Symmetry of all parameters
More informationINTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
INTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following
More informationUser Manual. asense VAV. CO 2 / temperature sensor with built-in general purpose controller
Gas and Air Sensors User Manual asense VAV CO / temperature sensor with built-in general purpose controller General The IAQ-sensor product asense VAV is used to measure indoor air carbon dioxide concentration
More informationResidual Stresses in Railway Axles
Residual Stresses in Railway Axles ŘEHA BOHUSLAV 1,a,*, VÁCLAVÍK JAROSLAV 2,b NÁVRAT TOMÁŠ 3,c and DAVID HALABUK 3,d 1 GHH-BONATRANS GROUP a.s., Revoluční 1234, 735 94 Bohumín, Czech Republic 2 Výzkumný
More informationDRILLING MANAGED PRESSURE REGIONAL OUTLOOK: EAST AFRICA REDUCED EMISSION COMPLETIONS SHALE TECHNOLOGY REVIEW
MARCH 2014 / DEFINING TECHNOLOGY FOR EXPLORATION, DRILLING AND PRODUCTION / WorldOil.com MANAGED PRESSURE DRILLING How automated MPD enables drilling of an impossible well in Mexico REGIONAL OUTLOOK: EAST
More informationTroubleshooting Guide: 640 Pediatric Exam Table with Midmark Scale
Troubleshooting Guide: 640 Pediatric Exam Table with Midmark Scale Contents Description Refer To: Scale Troubleshooting Chart Troubleshooting Error Codes Error Messages Adjustments / Repair Procedures
More informationPC-PUMP Points to Consider
PC-PUMP Points to Consider March 2007 This document contains a list of details regarding the use of C-FER s PC-PUMP software that all users should be aware of. These are based on questions asked and problems
More informationINTRODUCTION TO NETWORK WIND 3 MOUNTING THE UNIT 14 SELECTING THE DISPLAY MODE 5 ABBREVIATIONS AND DEFINITIONS 17
CONTENTS CONTENTS 1 INSTALLATION 14 GENERAL INTRODUCTION TO B&G NETWORK 2 SITING THE UNIT 14 INTRODUCTION TO NETWORK WIND 3 MOUNTING THE UNIT 14 EXAMPLE SYSTEMS USING NETWORK WIND 4 SPECIFICATION 16 SELECTING
More informationSURFACE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
SURFACE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following graphs.
More informationPneumatic high-pressure controller Model CPC7000
Calibration technology Pneumatic high-pressure controller Model CPC7000 WIKA data sheet CT 27.63 Applications Healthcare and avionics industry Industry (laboratory, workshop and production) Transmitter
More informationAbandonment Program for Paramount Fort Liard F 36
Abandonment Program for Paramount Fort Liard F 36 Well Name: Paramount et al Liard F 36 Area: 60 0 10 N, 123 0 15 W Location: Latitude: 60 0 05 27 Longitude: 123 0 22 00 UWI: 300F366010123150 WID: 1841
More informationTroxler Electronic Laboratories, Inc.
TROXLER MODELS 3400 4640 BASIC GAUGE OPERATIONS Troxler Electronic Laboratories, Inc. 3008 Cornwallis Road P.O. Box 12057 Research Triangle Park, NC 27709 Phone: 1.877.TROXLER Outside the U.S.A.: +1.919.549.8661
More informationFREQUENTLY ASKED QUESTIONS
What are some applications in which you ve successfully used this product? New Completions - Stage by Stage Diversion Between Frac plugs for Intra-Stage Diversion Replace Frac Plugs with Perf PODs - Full
More informationColorado Oil and Gas Conservation Commission
Colorado Oil and Gas Conservation Commission http://cogcc.state.co.us/ FORM 5A Completed Interval Report INDUSTRY TRAINING Denver, Colorado November 27, 2012 Form 5A Completed Interval Report Introduction
More informationMEASUREMENT COMMUNICATION INSIGHT
Temperature & Depth MEASUREMENT COMMUNICATION INSIGHT CONTENTS Introduction to Aquatec Measuring Temperature and Depth 2 3 Aquatec s Temperature and Depth Loggers AQUAlogger 520 AQUAlogger 530 AQUAlogger
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Date: Tracking No.: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Submitted
More informationDDR Dive Data Recorder Manual - Rel /12
DDR Dive Data Recorder Manual - Rel. 1.1 2/12 TABLE OF CONTENTS 1. WHAT IS THE DDR? 4 2. TECHNICAL CHARACTERISTICS 5 3. DOWNLOADING DATA TO A PC 6 4. DDR MANAGER 7 5. CONFIGURE DEVICE BUTTON 9 6. READ
More informationDepth - Driller COMPANY VAL ENERGY INC. BLEVINS #1-35 FIELD COUNTY GROUND LEVEL. , 11.0 ft above perm. Datum. Elev.: K.B ft
Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation Rm @ BHT Source Rmf Rmc Rmc @ Meas. Temperature Rmf @ Meas. Temperature Rm @ Meas. Temperature Source
More informationWhy Do Not Disturb Is a Safety Message for Well Integrity
Why Do Not Disturb Is a Safety Message for Well Integrity Presented at the Practical Well Integrity Conference 9-10 December, 2014 in Houston By Ron Sweatman, Principal Advisor, Reservoir Development Services,
More informationA Novel Approach to Capitalize WITSML Data in Geospatial Platform for Realtime Monitoring and Risk Assessment
A Novel Approach to Capitalize WITSML Data in Geospatial Platform for Realtime Monitoring and Risk Assessment Dr. Sethupathi Arumugam PhD Principal Consultant Biswa Ranjan Patra Principal Consultant Shebi
More informationAC : MEASUREMENT OF HYDROGEN IN HELIUM FLOW
AC 2010-2145: MEASUREMENT OF HYDROGEN IN HELIUM FLOW Randy Buchanan, University of Southern Mississippi Christopher Winstead, University of Southern Mississippi Anton Netchaev, University of Southern Mississippi
More informationDeep Submersible Level Transducer Series 300DS
KPSI Transducers Deep Submersible Level Transducer Series 300DS FEATURES! Custom Level Ranges up to 4614 ft (1408 m) H 2 O! Accuracy of ±0.5% FS! Analog Outputs of 4-20 ma or 0-5 VDC! Welded 316 SS Construction!
More informationSUBSEA KILL SHEET EXERCISE No. 5
Subsea Kill Sheet Exercise No. 5 SUBSEA KILL SHEET EXERCISE No. 5 Name: Date: Complete the Subsea vertical kill sheet provided on pages 2 and 3. Then answer questions 1 to 12. Please round calculations
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 15871 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationFor a similar sensor with o-ring mounting, refer to the 85BSD digital output pressure sensor.
Weldable or threaded process fittings Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option DESCRIPTION The 85BSD is a small profile, media
More informationUsing True Real-Time Data Interpretation to Facilitate Deepwater Drilling Mario Zamora and Sanjit Roy, M-I L.L.C.
AADE 1-NC-HO-9 Using True Real-Time Data Interpretation to Facilitate Deepwater Drilling Mario Zamora and Sanjit Roy, M-I L.L.C. Copyright 21 AADE National Drilling Technical Conference This paper was
More informationHydroPull. Extended-Reach Tool. Applications
Extended-Reach Tool HydroPull This tool incorporates a cycling valve that momentarily interrupts the flow to create water-hammer pressure pulses inside coiled or jointed tubing used in horizontal well
More informationB04 Guided Interpretation #4
Emeraude v2.60 Doc v2.60.01 - KAPPA 1988-2010 Guided Interpretation #4 B04-1/14 B04 Guided Interpretation #4 This example illustrates the following options: - Apparent Downflow - SIP (selective inflow
More informationBUYER S GUIDE AQUAlogger 520
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 520 Mini Temperature and Pressure Logger AQUAlogger 520 Aquatec s primary temperature and depth model, the AQUAlogger 520, combines years of product development
More informationE NGINEERED C EMENTING S OLUTIONS
DART CATCHER TOOL Blackhawk s Dart Catcher Tool provides indication of the exact location of downhole fluids during inner string cement jobs, cementing squeezes, or balanced cement plugs for temporary/permanent
More information