Roller Link Plate Pin Link Plate Roller Bushing Pin. Closed type Connecting Link
|
|
- Rosa Murphy
- 5 years ago
- Views:
Transcription
1 chain consists of roller links and pin links in series. RIVEE CHAIN COERE CHAIN chain ARS & LINKS. Link late in Link late Bushing in CONNECION OF ROLLER CHAIN Connecting Link Offset Link Spring clip type Connecting Link Closed type Connecting Link Cottered pin type Connecting Link Single pitch Offset Link wo pitch Offset Link SANAR ROLLER CHAINS Made to B29.1 specifications(american National Standard Institute). 1
2 he chains are available as single or multiple strand and may be supplied with either riveted or cottered pins. d L1 L2 Link late C eight imensions in Inches and ounds. ensile 25 1/4 1/8 * /4 1/8 * /4 1/8 * /8 3/18 * /8 3/18 * /8 3/18 * /2 5/ /2 5/ /2 5/ /2 5/ /2 1/ /8 3/ /8 3/ /8 3/ /8 3/ /8 3/ /4 1/ /4 1/ /4 1/ /4 1/ /4 1/ /4 1/ / /
3 / / / / / 4 3/ / 4 3/ / 4 3/ / 4 3/ / 4 3/ / 4 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / *s are rollerless - dimension shown is bushing diameter. Offset link of #25 is two pitch type. 3
4 he standard types of attachments provided on the chains are Bent attachments on one side or both sides - A1,K1,A2,K2 etc. Straight attachments on one side or both sides - SA1,SK1,SA2,SK2 etc. ide contour attachments -A1,A2,K1,K2 etc. Extended pin attachments - 1,3 etc. Standard Straight and Bend Attachments. A-1 attachment K-1 attachment SA-1 attachment SK-1 attachment imensions in Inches. Attachment. N O E C X Y S Z
5 ide Contour Straight and Bend Attachments. A-1 A-2 attachment K-1 K-2 attachment SA-1 SA-2 attachment SK-1 SK-2 attachment imensions in Inches. Attachment. N O E C X Y S Z
6 ouble - Bend Attachments. A-1 attachment K-1 attachment A-2 attachment K-2 attachment Attachment. N O C X Y F C C-2040 C C-2042 C C-2050 C C-2052 C-2060H C-2060H C-2062H C-2062H C-2080H C-2080H C-2082H C-2082H C-2100H C-2100H C-2102H C-2102H. imensions in Inches. 6
7 C-2120H C-2120H C-2122H C-2122H ouble - Straight Attachments. SA-1 attachment SK-1 attachment SA-2 attachment SK-2 attachment Attachment. N O O' C S Z F C C-2040 C C-2042 C C-2050 C C-2052 C-2060H C-2060H C-2062H C-2062H C-2080H C-2080H C-2082H C-2082H C-2100H C-2100H C-2102H C-2102H C-2120H C-2120H C-2122H C-2122H imensions in Inches.. Standard Extended ins. For Standard Series s, ouble - s. 7
8 -1 attachment (one extended pin) -3 attachment (two extended pins). in d in roj. H L imensions in Inches. -1 attachment -3 attachment in in roj. L. d H. C-2040 C C-2042 C-2042 C C-2050 imensions in Inches. 8
9 C-2052 C-2052 C-2060H C-2060H C-2062H C-2062H C-2080H C-2080H C-2082H C-2082H C-2100H C-2102H C-2100H C-2102H HEAVY SERIES ROLLER CHAINS Made to B29.1 specifications. hese chains are similar to standard roller chain, but having plate thickness of the next large pitch. he thicker link plates provide additional capacity for absorbing shock load. d L1 L2 Link late C eight imensions in Inches and ounds. ensile 40H 1/2 5/ H 40H-2 1/2 5/ H-2 50H 5/8 3/ H 50H-2 5/8 3/ H-2 60H 3/4 1/ H 60H-2 3/4 1/ H-2 80H 1 5/ H 80H-2 1 5/ H-2 100H 1 1 / 4 3/ H 100H / 4 3/ H-2 120H 1 1 / H 9
10 120H / H-2 140H 1 3 / H 140H / H-2 160H / H 160H / H-2 180H 2 1 / / H 180H / / H-2 200H 2 1 / / H 200H / / H-2 OUBLE ICH ROLLER CHAINS Made to B 29.3 specifications. hese are characterized by the figure 8 contour link plates and are similar to the basic series roller chains dimensionally except that the pitch is double. d L1 L2 Link late eight ensile imensions in Inches and ounds. A / A2040 A /4 3/ A2050 A /2 1/ A2060 A / A2080 OUBLE ICH CONVEYOR CHAINS Made to B 29.4 specifications. hese are extended pitch with oval contour link plates. hey are designed for conveyor service and made in 1" to 4" pitch in both standard roller(s-roller type) and large rollers(r-roller type). 10
11 Standard ype(s-) Large ype(r-) Standard ype(s-) d L1 L2 Link late eight ensile C / C-2040 C / 4 3/ C-2050 C-2060H 1 1 / 2 1/ C-2060H C-2080H 2 5/ C-2080H C-2100H 2 1 / 2 3/ C-2100H C-2120H C-2120H C-2160H / C-2160H imensions in Inches and ounds. Large ype(r-) d L1 L2 Link late eight ensile C / C-2042 C / 4 3/ C-2052 C-2062H 1 1 / 2 1/ C-2062H C-2082H 2 5/ C-2082H C-2102H 2 1 / 2 3/ C-2102H C-2122H C-2122H C-2162H / C-2162H imensions in Inches and ounds. 11
12 ISO/IN SANAR CHAINS hese chains are standardized in accordance with ISO and are fully interchangeable with chains built according to IN 8187 and BS 228:1970. *All riveted pin-type. ISO BS / IN No. d L2 Link late t C eight ensile 06B ,310 06B 06B ,080 06B-2 08B ,410 08B 08B ,600 08B-2 08B ,900 08B-3 10B ,840 10B 10B ,700 10B-2 10B ,500 10B-3 12B ,500 12B 12B ,000 12B-2 12B ,500 12B-3 16B ,500 16B 16B ,500 16B-2 16B ,000 16B-3 20B ,300 20B imensions in Inches and ounds. ISO BS / IN No. 12
13 20B ,100 20B-2 20B ,200 20B-3 24B ,900 24B 24B ,800 24B-2 24B ,500 24B-3 28B ,500 28B 28B ,400 28B-2 28B ,500 28B-3 32B ,100 32B 32B ,900 32B-2 32B ,100 32B-3 40B ,200 40B 40B ,300 40B-2 40B ,300 40B B - Straight Shape Link late. SAINLESS ROLLER CHAINS hese are standard series chains made of "304" chrome nickel stainless steel for using under corrosive conditions or in high temperature applications. d L1 L2 C Link late eight 25SS 1/4 1/8 * SS 25SS-2 1/4 1/8 * SS-2 imensions in Inches and ounds. 13
14 35SS 3/8 3/16 * SS 35SS-2 3/8 3/16 * SS-2 40SS 1/2 5/ SS 40SS-2 1/2 5/ SS-2 50SS 5/8 3/ SS 50SS-2 5/8 3/ SS-2 60SS 3/4 1/ SS 60SS-2 3/4 1/ SS-2 80SS 1 5/ SS 80SS-2 1 5/ SS-2 1. *s are rollerless - dimension shown is bushing diameter. 2. Offset link of #25 is two pitch type. d L1 L2 Link late eight imensions in Inches and ounds. C2040SS 1 5/ C2040SS C2042SS 1 5/ C2042SS C2050SS 1 1 / 4 3/ C2050SS C2052SS 1 1 / 4 3/ C2052SS C2060SS 1 1 / 2 1/ C2060SS C2062SS 1 1 / 2 1/ C2062SS C2080SS 2 5/ C2080SS C2082SS 2 5/ C2082SS 14
15 NICKEL LAE CHAINS Nickel plated chain may be desirablein mildly corrosive areas.he appearance is nickel gloss resembling the finish of stainless steel,and the tensile strength meets specifications. he chains are available as single or multiple strand. d L1 L2 Link late eight ensile 25N 1/4 1/8 * N 35N 3/8 3/16 * N 40N 1/2 5/ N 50N 5/8 3/ N 60N 3/4 1/ N 80N 1 5/ N 100N 1 1 / 4 3/ N 120N 1 1 / N C2040N 1 5/ C2040N C2050N 1 1 / 4 3/ C2050N C2060HN 1 1 / 2 1/ C2060HN 1. *s are rollerless - dimension shown is bushing diameter. imensions in Inches and ounds. SIE BO CHAINS 15
16 he basic dimensions are the same as those of standard chain,but the side bow chains are provided with extra clearances between both the bushings and pins and in overall chain width for extra lateral radii and flexibility. in d Link late L2 Min. Radius of Side Bow R eight imensions in Inches and ounds. ensile 40SB 1/2 5/ ,480 40SB 50SB 5/8 3/ ,420 50SB 60SB 3/4 1/ ,830 60SB 80SB 1 5/ ,840 80SB in d Link late L2 Min. Radius of Side Bow eight imensions in Inches and ounds. ensile 16
17 R C / ,480 C-2040 C / ,480 C-2042 C / 4 3/ ,420 C-2050 C / 4 3/ ,420 C-2052 C- 2060H 1 1 / 2 1/ ,830 C-2060H C- 2062H 1 1 / 2 1/ ,830 C-2062H C- 2080H 2 5/ ,840 C-2080H C- 2082H 2 5/ ,840 C-2082H OILESS CHAINS he luburucant impregnated into the porosity of sintered metal bushings permit operation in low speed applications where lubricantion is restricted, food processing equipment, packing and textile machines etc. e offere two types of SL-Series and NL-Series Oiless s - even in applications that don't receive proper lubrication. SL-series Oiless s his chain is constructed a one -piece sintered metal bushing. (Bushing chains - no rollers). No. d L L2 Link late eight ensile imensions in Inches. No. 40SL 1/2 5/ SL 50SL 5/8 3/ SL 60SL 3/4 1/ SL 80SL 1 5/ SL 17
18 ouble pitch Oiless s No. A- 2040SL d L L2 Link late eight ensile imensions in Inches. No. 1 5/ A-2040SL C-2040SL 1 5/ C-2040SL C-2042SL 1 5/ C-2042SL A- 2050SL 1 1 / 4 3/ A-2050SL C-2050SL 1 1 / 4 3/ C-2050SL C-2052SL 1 1 / 4 3/ C-2052SL A- 2060SL 1 1 / 2 1/ A-2060SL C-2060SL 1 1 / 2 1/ C-2060SL C-2062SL 1 1 / 2 1/ C-2062SL A- 2080SL 2 5/ A-2080SL C-2080SL 2 5/ C-2080SL C-2082SL 2 5/ C-2082SL NL-series Oiless s 18
19 his chain is constructed sintered metal bushing and chain roller combination for smooth engagement with sprocket. No. Bushing d L1 L2 Link late t eight ensile imensions in Inches. No. 40NL 1/2 5/ NL 50NL 5/8 3/ NL 60NL 3/4 1/ NL 80NL 1 5/ NL ouble pitch Oiless s No. C- 2040NL C- 2042NL Bushing d L L2 Link late eight ensile imensions in Inches. No. 1 5/ C-2040NL 1 5/ C-2042NL 19
20 C- 1 1 / 2050NL 4 3/ C-2050NL C- 2052NL C- 2060NL C- 2062NL C- 2080NL C- 2082NL 1 1 / 4 3/ C-2052NL 1 1 / 2 1/ C-2060NL 1 1 / 2 1/ C-2062NL 2 5/ C-2080NL 2 5/ C-2082NL HOLLO IN CHAINS Because of the hollow-pin design,many types of crossrods, pins and custom attachment may be inserted at any link without disassembling the chain. Available in both single and double pitch types. Bushing d L2 Hole do Link late eight ensile imensions in Inches and ounds. 40H 1/2 5/16 5/ ,420 40H 50H 5/8 3/ ,400 50H 60H 3/4 1/2 15/ ,940 60H 80H 1 5/8 5/ ,803 80H 20
21 Bushing d L2 Hole do Link late eight ensile imensions in Inches and ounds. 2040H 1 5/16 5/ , H 2050H 1 1 / 4 3/ , H 2060H 1 1 / 2 1/2 15/ , H 2080H 2 5/8 5/ , H 2042H 1 5/16 5/ , H 2052H 1 1 / 4 3/8 3/ , H 2062H 1 1 / 2 1/2 5/ , H 2082H 2 5/8 1 1 / , H LEAF CHAINS Made of roller chain type links and riveted pins to utilize maximum strenght widths. Available in various lacings on both AL & BL series leaf chains. Lacing combinations 21
22 Notes to Selection o not use a chain with low safety factor.otherwise,pin will turn,resulting in chain failure. erform periodic lubrication.even when safety factor is satisfactory,insufficient lubrication will result in pin rotation. Safety factor of chain is determined by the related regulations,or by this bulletin, whichever is greater. Leaf Operating Notes 1. Lubricate leaf chain periodically to avoid rotation of pin and reduce wear for extended service life. Recommended oil:sae30-sae40 Lubrication intervals:etermined to keep lubricant left between pin and inner link plate. Lubrication method:lubrication into space between link plates wen chin is loosend. 2. Avoid use of chain in corrosive environment. 3. Measure chain length periodically to check for wear and elongation. If elongation reaches its limit(3%),immediately replace chain. AL SERIES LEAF CHAINS AL series leaf chains - light duty,consist of link plates of the same contour and thickness as the link plates of standard roller chains having the same pitch. imensions in Inches and ounds. 22
23 Lacing Over Rivets L in d late Heiht H late ensile eight AL 422 1/2 2 X AL 422 AL 444 1/2 4 X AL 444 AL 466 1/2 6 X AL 466 AL 522 5/8 2 X AL 522 AL 544 5/8 4 X AL 544 AL 566 5/8 6 X AL 566 AL 644 3/4 4 X AL 644 AL 666 3/4 6 X AL 666 AL X AL 844 AL X AL 866 AL / 4 4 X AL 1044 AL / 4 6 X AL 1066 AL / 2 4 X AL 1244 AL / 2 6 X AL 1266 AL / 4 4 X AL 1444 AL / 4 6 X AL 1466 AL X AL 1644 AL X AL 1666 BL SERIES LEAF CHAINS BL series leaf chains - heavy duty,consist of link plates with next larger size pitch chain of standard roller chains. 23
24 Lacing Over Rivets L in d late Heiht H late ensile eight BL 423 1/2 2 x , BL 423 BL 434 1/2 3 x , BL 434 BL 446 1/2 4 x , BL 446 BL 523 5/8 2 x , BL 523 BL 534 5/8 3 x , BL 534 BL 546 5/8 4 x , BL 546 BL 623 3/4 2 x , BL 623 BL 634 3/4 3 x , BL 634 BL 646 3/4 4 x , BL 646 BL x , BL 823 BL x , BL 834 BL x , BL 846 BL / 4 2 x , BL 1023 BL / 4 3 x , BL 1034 BL / 4 4 x , BL 1046 BL / 2 2 x , BL 1223 BL / 2 3 x , BL 1234 BL / 2 4 x , BL 1246 BL / 4 2 x , BL 1423 BL / 4 3 x , BL 1434 BL / 4 4 x , BL 1446 BL x , BL 1623 BL x , BL 1634 BL x , BL 1646 imensions in Inches and ounds. SIE ROLLER CHAINS Side chains has extended pins and side rollers are mounted on the extended pin at one or both sides of the chain. he side rollers received the weight of materials carried,ensuring stable chain running for conveyance of materials. Available in both of steel side roller and poliacetal resin side roller. Alternate one side at every pitch. Both sides at 2 pitches. 24
25 No. imensions in Inches and ounds. in Side iameter d A B S HS 40 1/2 5/ /8 3/ /4 1/ / /4 3/ Alternate one side at every pitch. Both sides at 2 pitches. 25
26 No. imensions in Inches and ounds. in Side iameter d A B S HS C / C C /4 3/ C C-2060H /2 1/ C-2062H C-2080H / C-2082H C-2100H /2 3/ C-2102H O ROLLER CHAINS op rollers are monunted above the chain pitch line in the middle of adjacent rollers to support material directly.he goods on the top roller can be loaded,taken off or temporarily stopped while the chain is in running. Available in both of steel top roller and poliacetal resin top roller. op at every pitch 26
27 op at 2 pitches d op F1 F2 C Z N E imensions in Inches and ounds. 40 1/2 5/ /8 3/ /4 1/ / / 4 3/ op at every pitch imensions in Inches and ounds. d F1 A B C Z 27
28 C / C-2040 C / C-2042 C / 4 3/ C-2050 C / 4 3/ C-2052 C-2060H 1 1 / 2 1/ C-2060H C-2062H 1 1 / 2 1/ C-2062H C-2080H 2 5/ C-2080H C-2082H 2 5/ C-2082H C-2100H 2 1 / 2 3/ C-2100H C-2102H 2 1 / 2 3/ C-2102H AGRICULURAL CHAINS S-series steel chains are designed to replace steel/malleable chains when greater wear resistance and strength are required.hey are characterizes by the figure 8 contour linkplates. A wide range of attachments are available. d L2 Link late eight ensile imensions in Inches and ounds. S ,980 S 35 S ,600 S 42 S ,400 S 52 S ,400 S 55 S ,400 S 45 S ,380 S 62 CA-series steel chains have greater wear life and higher strength than S-series steel chains.hey are characterizes by oval contour linkplates. A wide range of attachments are available. 28
29 d L2 Link late eight ensile imensions in Inches and ounds. CA ,200 CA 550 CA ,200 CA
Q Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket
Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22
More informationSKF Transmission chain
SKF ransmission chain Standard and compliance SKF s are manufactured in state of the art facilities. ight quality controls are employed to assure product conformance to the ISO standards and the existing
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationMADE-TO-ORDER SERIES CHAIN
Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationSMALL SIZE. The Smart Chain Choice!
SMLL SIZE COVEYOR CIS he Smart Chain Choice! In Markets round the World. Only from SUBKI. SUBKI Small Size Conveyor Overseas Group Companies SUBKI Group Environmental olicy hilosophy he subaki Group understands
More informationRoller Chain and Sprocket Troubleshooting Guide
Roller Chain and Sprocket Troubleshooting Guide Drive System (Roller Chain and Sprockets) Troubleshooting Guide 1. General Chain is riding up on the sprocket. The roller chain and sprocket do not match.
More informationSTRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains
812 815 STRAIGHT RUNNING CHAIN Series 1874 GV Sideflexing steel gripper chains 1874 GV GRIPPER CHAINS with vulcanized rubber pads 9.5 3.1 23.8 31.8 SC 56.5 21 17 7 19.05 19.05 Ø 5.08 Ø 11.91 14.35 25 12.7
More informationD O U B L E - P I T C H POWER TRANSMISSION AND CONVEYOR ROLLER CHAIN 19 AT TACHMENT CHAIN ASME/ANSI STA N D A R D 23
BUILDING THE LONGEST LASTING ROLLER CHAIN H I S T O RY 2 ISO 9001 4 Chain Components 6 Manufacturing Process 6 CHAIN PERFORMANCE 10 Why Use Roller Chain? 11 Cost Comparison Work Sheet 12 S TANDARD AND
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées
INTERNATIONAL STANDARD ISO 1977 Second edition 2006-08-15 Conveyor chains, attachments and sprockets Chaînes de manutention, plaques-attaches et roues dentées Reference number ISO 1977:2006(E) ISO 2006
More informationChain Drives ELEMEN MESIN II
Chain Drives ELEMEN MESIN II Introduction Belt and rope drives slipping may occur To avoid slipping Chains The chains are made up of number of rigid links which are hinged together by pin joints in order
More informationDrive and Conveyor Chains Catalog. Rexnord and Link-Belt Roller Chains
rive and onveyor hains atalog Rexnord and Link-elt Roller hains Section Index escription Page Introduction Introduction -2 rive hains Standard Roller hains -1 SU and H Series hains -4 ouble rive hains
More informationA&S. More than just a chain.
A&S. More than just a chain. www.renold.com 2 I More than just a chain Renold A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationCHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT
CHAIN PRODUCTS ALL-MAKES CROSS REFERENCE GUIDE FARM & AGRICULTURAL CONSTRUCTION INDUSTRIAL HEAVY DUTY FARM & AGRICULTURAL EQUIPMENT PRECISION ROLLER CHAIN The entire range of precision roller chain meets
More informationChain Drives. Chain Drives 759 C H A P T E R
Chain Drives 759 C H A P T E R 21 Chain Drives 1. Introduction. 2. Advantages and Disadvantages of Chain Drive over Belt or Rope Drive. 3. Terms Used in Chain Drive. 4. Relation Between Pitch and Pitch
More informationAsphalt Batch Plant Processing
Asphalt atch Plant Processing ngineered for Asphalt Operations www.ustsubaki.com Asphalt Chain www.ustsubaki.com Asphalt is tough! ard aggregates, shock loads, intense heat, and almost around-the-clock
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationForestry Chain. Forestry
sec Forest Forestry 11/19/08 9:57 M Page 158 Forestry Renold Jeffrey ngineering lass s for the forestry and paper industries are built to move materials in demanding conditions. Our 81X onveyor s and Welded
More informationSteel Adaptors and Idler Sprockets
Steel Adaptors and Idler Sprockets Detachable Hubs Hub Ref. Min. Bore Max. Bore A B C D E F H App. Wt. D30 8 20 55 45 30 20.0 4.2 4 3.0 0.15 D40 10 26 70 58 40 25.0 5.2 5 5.2 0.32 D50 14 32 80 67 50 32.0
More informationDiamond Oil Field PRoduct Guide Agriculture Product Guide
Diamond Oil ield oduct Guide Agriculture roduct Guide able of ontents Diamond Series Standard Series 4 Heavy Series 4 Double 5 ower ransmission hain 5 onveyor hain 5 Sapphire Series Standard Series 6 Heavy
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationShort-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 606 Fourth edition 2015-08-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de
More informationISO 606 INTERNATIONAL STANDARD. Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
INTERNATIONAL STANDARD ISO 606 Third edition 2004-03-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de transmission de précision à rouleaux
More informationLIFTING CHAIN DESIGN FOR TAINTER GATES AND ROLLER GATES
LIFTING CHAIN DESIGN FOR TAINTER GATES AND ROLLER GATES Timothy Paulus, P.E. U.S Army Corps of Engineers, Saint Paul District (651) 290-5530 INTRODUCTION AND SUMMARY This paper is a follow-up to a technical
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationSelective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric
THE INNOVATOR OF OUR INDUSTRY Selective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric Protected by U.S. and International Patents Overview
More informationPLATE TOP AND GRIPPER CHAINS
PLTE TOP ND GRIPPER CHINS Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater ing capacity and permits even higher speeds and longer runs
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationAlso suitable for: Concrete C12/15. For fixing of: Steel constructions Railings Consoles Ladders Wooden constructions Cable trays Machines Staircases
28 Highbond anchor FHB II Flexible installation and highest loads in the cracked tensile zone. OVERVIEW FHB II-A S (standard), zinc plated steel FHB II-A L (performance optimised), zinc-plated steel Resin
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationRACING TO PERFORMANCE DETAIL B (11) Ra 3,2
(9) 0,5 X 45 RCING TO PERFORMNCE DETIL B (11) B www.afam.com Ra 3,2 (7) Sprockets 4 FRONT SPROCKETS fam uses the best alloy steel available to produce their front sprockets. Minimum tolerances combined
More informationRelated Elevator Products
37 SECTION 2 - Elevator Products Reeving Splices Related Elevator Products Reeving Splice Specifications PIN # Wire Rope Size Units per Carton Wt. per Carton (Lbs) Length (IN) Color Code 1119100012 3/8
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationG238. G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable. Features
G238 G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable The G238 features a unique modular design enabling it to expand to a variety of test scenarios from a standard 3 point bend test to 4 point
More informationChain (11-speed) Dealer's Manual CN-9000 CN-6800 CN-HG CN-HG CN-HG CN-HG CN-HG CN-HG600-11
(English) DM-CN0001-04 Chain (11-speed) Dealer's Manual CN-9000 CN-6800 CN-HG901-11 CN-HG900-11 CN-HG701-11 CN-HG700-11 CN-HG601-11 CN-HG600-11 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY... 4 INSTALLATION...
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationChain (11-speed) Dealer s Manual CN-9000 CN-6800 CN-HG CN-HG CN-HG CN-HG CN-HG CN-HG CN-E DM-CN
(English) DM-CN0001-06 Chain (11-speed) Dealer s Manual CN-9000 CN-6800 CN-HG901-11 CN-HG900-11 CN-HG701-11 CN-HG700-11 CN-HG601-11 CN-HG600-11 CN-E8000-11 CONTENTS IMPORTANT NOTICE...3 TO ENSURE SAFETY...4
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationFraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast
Fraser Bronze Alloy LG2 - BRONZE Bronze Bushing Product Information Sheet - LG2 A. W. Fraser Alloy LG2 is a general puspose leaded gunmetal conforming to the requirements of B.S. 1400-1985 Alloy LG2. LG2
More informationCost reduction for conveyor systems through self-adjusting chain wheel
Cost reduction for conveyor systems through self-adjusting chain wheel Karl Herkenrath Current energy costs let expenses for the production and manufacturing of round link chains reach a very high level.
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationoilite BEARINGS Oilite Super Oilite Non-Tox Excelite Bearings
BEARINGS Oilite Super Oilite Non-Tox Excelite Bearings BEARINGS INTRODUCTION A commitment to provide products and support that routinely goes beyond the expected. From engineering assistance to production
More informationDesign Guide. Technical Information29
Development of Early Roller Chain As the industrial revolution gained pace, the need for higher performance chain ensured that the product did not stand still. A quick look at the 1880 patent would give
More informationOIL FIELD ROLLER CHAIN
OIL FIL OLL AI OIL FIL OLL AI AI SIPTIOS A IMSIOS oller chains used in the oil and gas industry are subject to some of the greatest operating loads and harshest environments. iamond hain OLL WIT O L L
More informationHoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
More informationRexnord 815 TableTop Chain
815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information
More informationPrecision Power Transmission Roller Chains, Attachments, and Sprockets
ASME B29.1-2011 (Revision of ASME B29.1 and Partition From ASME B29.100-2002) Precision Power Transmission Roller Chains, Attachments, and Sprockets AN AMERICAN NATIONAL STANDARD ASME B29.1-2011 (Revision
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationRoughneck TM Mesh Slings
Roughneck TM Slings ROUGHNECK WIRE MESH SLINGS Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings Features and Benefits Promotes Safety Steel
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationINTRODUCTION TABLE OF CONTENTS
2 INTRODUCTION Thank you for choosing Servometer to design and manufacture your unique, new electrodeposited bellows for your particular application. The definitions, formulas and design parameters inside
More informationHeavy Equipment Technician Rigging
1. What is SWL? a. Single weight of load b. Second weakest location c. Working load limit Heavy Equipment Technician IP Red Seal Practice Exam d. Abbreviation for swivel Heavy Equipment Technician Rigging
More informationMeasure to solve technical subjects in MARICO-2 subassembly retrieval. Experimental Fast Reactor Joyo Oarai R&D Center, JAEA
Measure to solve technical subjects in MARICO-2 subassembly retrieval Experimental Fast Reactor Joyo Oarai R&D Center, JAEA 1 Status of MARICO-2 test subassembly (S/A) Rotating Plug Hold-down shaft Hold-down
More informationCLIMBING Pads. Straps Gaffs Spikes Hardware
CLIMBING Pads Straps Gaffs Spikes Hardware Quick Change Aluminum Climbers CTB Tree and Pole Climbing Kit Kit with straps and L pads Patented design give these climbers strength, durability and style Utilizes
More informationInjection mortar FIS VL
Injection mortar FIS VL The solid injection mortar for standard applications in cracked concrete and masonry High-bay warehouses BUILDING MATERIALS Approved for anchorings in: Concrete C20/25 to C50/60,
More informationBEST RIDERS CHOICE WORLD S NO.1 GENUINE PARTS MANUFACTURER MADE IN JAPAN: UNCOMPROMISED QUALITY PROVIDING OUTSTANDING PERFORMANCE THE WORLD OVER
CATALOG 2018 BEST RIDERS CHOICE WORLD S NO.1 GENUINE PARTS MANUFACTURER D.I.D is the World s No.1 original parts (OE) supplier for Japanese and European motorcycle manufacturers (Based on industry surveys
More informationFall Protection Checklist. Guardrail System
Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the
More information(12) Patent Application Publication (10) Pub. No.: US 2005/ A1
(19) United States US 20050272546A1 (12) Patent Application Publication (10) Pub. No.: US 2005/0272546A1 Reiter (43) Pub. Date: Dec. 8, 2005 (54) RIVETED SPROCKETASSEMBLY (75) Inventor: Markus Reiter,
More informationThese products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have
More informationOMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring
More informationSECURITY AND CONFIDENCE AT HEIGHT
Detachable Cable Sleeve SECURITY AND CONFIDENCE AT HEIGHT THE ULTIMATE IN FALL PROTECTION THE DANGERS OF WORKING AT HEIGHT Every day, workers around the world climb ladders to great heights to get their
More informationLARGE SIZE CONVEYOR CHAINS & SPROCKETS
SUBAKI LARGE SIZE COVEYOR CHAIS & SROCKES Bearing Roller Conveyor Chain Shoulder Bush Chain Large Size Conveyor Chains & Sprockets RF Flow Chain Bucket Elevator Chain General Use subaki Group Basic Environmental
More informationROPE. Average Tensile (lbs) Average. Tensile. (lbs)
Rope Class ropes are made from any or all of the following fibers: olefin, polyester or nylon. Additional rope needed for splice length of crowns plus lengthof eye with thimble length of crowns plus cerc.
More informationPRODUCT SPECIFICATION. SFP+ Cage and Cage Assembly 1 of 8 A
SFP+ Cage and Cage Assembly 1 of 8 A 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the _Small Form-factor Pluggage (SFP+) product. 2.0 Scope This
More informationBANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline?
BANKSMAN / SLINGER 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? A. 16mm B. 10mm C. 12mm 2. What is the maximum temperature that a webbing sling can be
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationTools & Installation. Tools & Installation Index
L Radius +0 59-2 32 60 +2 A B -0 32 C E F.09" ia. Weep Hole Tools & Installation MAXIMATOR offers manual Coning and Threading tools that are designed to prepare accurate tubing ends to accept the medium,
More informationPTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3
The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer
More informationStainless Steel Straps
Stainless Steel s Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature,
More informationHYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
More informationLiftAlloy TM Chain Slings
LiftAlloy TM LiftAlloy CHAIN SLING BASICS Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations LiftAlloy chain slings, available in grade 00 for 7/32" through 3/4",
More informationProfile Design Recommendations
Profile Design Recommendations Gates Mectrol Profile Design 1 Over one thousand profile designs are available from Gates Mectrol s extensive mold inventory. Visit the Gates Mectrol Profile Selector Guide
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationBellows actuator EB Key features
Bellows actuator B Bellows actuator B Key features Key features Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 50 KN Low installation
More informationTechnical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationOperator s Safety Manual Sumner Max Jax / Beam Jax
May 2013 Operator s Safety Manual Sumner Max Jax / Beam Jax www.sumner.com 7514 Alabonson Road Houston, TX 77088 U.S.A ph: 281.999.6900 fax: 281.999.6966 75 Saltsman Drive Unit 5 Cambridge, ON N3H 4R7
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationOver 330 Times World Champion.
General Catalogue 2017 Since 1919. 100% Made in Italy. The chain of Champions. Original equipment on top bike manufacturers. Over 330 Times World Champion. 2 Index 4 5 6 9 10 : 98 years of unbeatable chains
More informationdon't print this page!
don't print this page! www.ustsubaki.com Markets and Applications U.S. Tsubaki sprockets are utilized worldwide in many markets and applications, including: Oil and Gas Lumber Mining Primary Metals Material
More informationGeneral Performance Data Hose Ref Minimum Bend. Safety Pressure at 20 C (BAR) Working Pressure at. Flow Rate at 3 bar (lit/min) Working Pressure
The Classic range provides a safe and taint free conveyance of potable water supplies for Domestic and Commercial plumbing applications. The range is designed to achieve robust and flexible solutions with
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationA joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT PFT-0105
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT P O L I F L E X - PFT-05 POLIFLEX-T PTFE FLEXIBLE JOINT FEATURES Polytetrafluoroethylene (PTFE) hose has solved the short life problem of metall with most
More informationTwo Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
More informationParachutage Hardware Onderdelenlijst
Parachutage Hardware Onderdelenlijst Alle hardware items voor Parachute gebruik werden opgesomd op deze pagina. Graag beantwoorden we uw specifieke vragen. Contacteer ons info@jera-aae.com Tel. 056 50
More informationIntroduction to Stainless Steel Fitting Line
Introduction to Fitting Line he wyer Series -1000 quality tube fittings have been designed and manufactured to provide reliable leak-free connections in a wide variety of applications. reliable leak-free
More informationБерг АБ Тел. (495) , факс (495) Turning Ideas Into Engineered Solutions KAYDON RING & SEAL, INC.
Turning Ideas Into Engineered Solutions RING & SEAL, INC. K-CBS Series Circumferential Barrier Seals Kaydon s high performance circumferential barrier seals back up DGS systems with performance & economy.
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Conveyor Wear Bed T- Chain Guides and Wear Beds Valu Guide rail can be used as a guide or wear strip for wide
More informationPeinert ZEPHYR. Assembly. The Zephyr is easily rigged; there are only three removable parts - the seat, the foot stretcher, and the rigger arm.
Peinert ZEPHYR Assembly The Zephyr is easily rigged; there are only three removable parts - the seat, the foot stretcher, and the rigger arm. Removal and installation of the seat. If the seat is in the
More informationPLEASE NOTE: Pressures for 200mm (8ins) and 250mm (10ins) are based on the use of METALFLEX Braided Braid
METCONAB B-FLEX Stainless Steel Annular Convoluted Hose. A close pitch hose with a high degree of flexibility suitable for most applications and normally supplied. BRAID Single or double layers of Stainless
More information