GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS

Size: px
Start display at page:

Download "GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS"

Transcription

1 GRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein Mission Oaks Blvd., Camarillo, CA Visit our Web Site at Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts please call

2 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below: Model Serial No. Purchase Date SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Overall Dimensions: 21 L X 27-3/8 W X 83 H Holder Hook Dimensions: 3-1/8 L X 1-11/16 W X 1/8 Thick Base Dimensions: 27-1/4 L X 6 W Arm Dimensions: 10 L X 1-5/8 O.D. X 15-1/4 W Weight Capacity: 110 Lbs. (evenly distributed) Stores a maximum of two bikes vertically. Arms can be angled for bike hanging preference. Safety Warnings and Precautions WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Keep work area well lighted. 3. Use the right product for the job. There are certain applications for which the Gravity Bike Rack was designed. Do not modify the Gravity Bike Rack and do not use this product for a purpose for which it was not intended. 4. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. 5. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. 6. Do not operate product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product. 7. Use eye protection. Always wear ANSI approved impact safety goggles during assembly. 8. Always check hardware and assembled parts after assembling. All connections should be tight and hardware tightened. 9. Do not exceed the Bike Rack s maximum weight capacity of 110 lbs. 10. Make certain that the Gravity Bike Rack is mounted into a 2 x 4 stud. The mounting surface must be able to support the weight of the Bike Rack, bicycles and any accessories suspended from the Bike Rack. SKU For technical questions please call Page 2

3 11. Do not allow children to play with, or, hang/climb on the Bike Rack; adults should put on and take off bikes from the rack. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking your Gravity Bike Rack, check to make sure all parts listed on page 5 are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at: Assembly Your Gravity Bike Rack will require complete assembly before use. It is important that you read the entire manual to become familiar with the product BEFORE you set up and use the Gravity Bike Rack. The Gravity Bike Rack can be easily assembled by attaching the parts listed in the following steps. The Bike Rack will stand on its own and will hold the weight of two standard bicycles. You also have the option of mounting the Bike Rack to a solid surface as described in the Mounting the Bike Rack section on page Attach the Angle Post (2) down into the Base (1). Slide the Middle Post (3) down into the Angle Post (2). Note: All key slots must face (down) the same direction-see Figure Slide the Upper Post (6) down into the Middle Post (3). 3. Decide on the location to install the Support Beams (14). The Support Beams have two tabs located on the end. Line up the tabs with the key hole slots, press the tabs into the slots and slide down the Support Beam (14), making certain that it is firmly in place-see Figure 1. Figure 1 Big Tube Cap (15) key slot Support Beam (14) Upper Post (6) 4. The Adjustable Beam (4) attaches to the Support Beam (14) and can be adjusted at different angles. Line up the tab on the Adjustable Beam (4) with the holes on the end of the Support Beam (14) so that the desired angle is attained. Insert the tab into the desired hole-see Figure 2 on page 4. SKU For technical questions please call Page 3

4 Figure 2 holes on Support Beam (14) pin on Adjustable Beam (4) 5. Once the Adjustable Beam (4) is set in place, insert the Inner Hex Round Head Bolt M8X55 (8) into the Adjustable Beam and thread into the Support Beam using a Hex Wrench (not included). 6. Attach the Bike Holder Hooks (7) to the Adjustable Beams (4) at the desired angle. Secure in place with Plastic Washer (12), Philips Head Bolt (11), and Plastic Bolt Cap (10). 7. Attach Helmet Hooks (5) to either Middle Post (3) or Upper Post (6). 8. Insert Big Tube Caps (15) into the top end of the Upper Post (6), and ends of the Base (1). 9. Insert Small Tube Caps (16) onto the end of both Adjustable Beams (4). Using the Gravity Bike Rack 1. Bicycles can be hung on the Bike Holder Hooks (7) by the frame, handlebars, or by placing the wheel rims onto the hooks. When hanging bicycles on the Gravity Bike Rack, be careful not to scratch the bicycle frame or bang the bicycle components. 2. Bicycle accessories such as helmets and gloves can be placed on the Helmet Hooks. Mounting the Bike Rack 1. Before attaching the Gravity Bike Rack to a wall or surface, make sure the mounting surface is capable of supporting the weight of the Bike Rack, bicycles and any accessories that will be hung from the Rack. 2. Make certain the mounting surface is solid. The Gravity Bike Rack must be mounted to a solid wood stud. Mount using stainless steel grade 5 anchored hardware, 3 length x 1/4 diameter (not included). 3. Line up the mounting holes on the Upper Post (6) and Middle Post (3) against the stud. Tap through the mounting holes to make a mark on the mounting surface. Remove the Rack and drill to create path for screws. Pre-drill holes making certain that the drilling path is clear of any obstacles such as cables, wires and lines. 4. Secure the Gravity Bike Rack to the mounting surface with stainless steel grade 5 anchored hardware (not included). SKU For technical questions please call Page 4

5 Parts List Part # Description Quantity Part # Description Quantity 1 Base 1 10 Plastic Bolt Cap 4 2 Angle Post 1 11 Philips Head Bolt 3 Middle Post 1 M6 X Adjustable Beam 2 12 Plastic Washer 4 5 Helmet Hook 2 13 Spring 2 6 Upper Post 1 14 Support Beam 2 7 Bike Holder Hook 4 15 Big Tube Cap 3 8 Inner Hex Round 16 Small Tube Cap 4 Head Bolt M8X Washer 2 Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Parts and Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU For technical questions please call Page 5

airplaine kite Model assembly & Operating Instructions Important: If damage is caused due to a crash; your warranty is void.

airplaine kite Model assembly & Operating Instructions Important: If damage is caused due to a crash; your warranty is void. airplaine kite Model 95081 assembly & Operating Instructions Important: If damage is caused due to a crash; your warranty is void. Visit our website at: http://www.harborfreight.com Read this material

More information

30 magnetic sweeper with wheels

30 magnetic sweeper with wheels 30 magnetic sweeper with wheels Model 93245 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095 10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

deluxe toilet safety support

deluxe toilet safety support deluxe toilet safety support Model 97388 Cleaning, Assembly, And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

foldable/adjustable sawhorse

foldable/adjustable sawhorse foldable/adjustable sawhorse Model 96506 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

AIR/OVER HYDRAULIC JACK 20 TON

AIR/OVER HYDRAULIC JACK 20 TON AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.

More information

PORTABLE 5 GALLON AIR TANK ASSEMBLY & OPERATING INSTRUCTIONS

PORTABLE 5 GALLON AIR TANK ASSEMBLY & OPERATING INSTRUCTIONS PORTABLE 5 GALLON AIR TANK MODEL 472 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight

More information

1 DRIVE INDUSTRIAL IMPACT WRENCH

1 DRIVE INDUSTRIAL IMPACT WRENCH 1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight

More information

Model Visit our website at:

Model Visit our website at: 6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

2000 lb manual winch

2000 lb manual winch 2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

COMPACT METAL bender 99826

COMPACT METAL bender 99826 COMPACT METAL bender 99826 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011 60 farm jack 66183 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

Model ASSEMBLY and OPERATING INSTRUCTIONS

Model ASSEMBLY and OPERATING INSTRUCTIONS QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

1/4 Air Ratchet Wrench

1/4 Air Ratchet Wrench /4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All

More information

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS 1/2 Twin Hammer Composite Air Impact Wrench 95098 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save Save This This Manual Manual Keep manual for the safety warnings and precautions, assembly, Keep manual for the safety warnings and precautions, assembly, operating,

More information

Heavy duty English wheel

Heavy duty English wheel Heavy duty English wheel 65619 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

6 digital caliper with case

6 digital caliper with case 6 digital caliper with case Model 98563 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

G R AV I T Y B I K E S TA N D OWNER S MANUAL

G R AV I T Y B I K E S TA N D OWNER S MANUAL G R AV I T Y B I K E S TA N D OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Hole cutter. Model 97194

Hole cutter. Model 97194 Hole cutter Model 97194 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product

More information

AIR INLINE METAL SHEAR

AIR INLINE METAL SHEAR AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

4-BIKE HITCH RACK OWNER S MANUAL

4-BIKE HITCH RACK OWNER S MANUAL 4-BIKE HITCH RACK OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS 1 / 2 COMPACT AIR TWIN HAMMER IMPACT WRENCH 94802 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

20 Ton Air Over Hydraulic Jack

20 Ton Air Over Hydraulic Jack 20 Ton Air Over Hydraulic Jack Model 95553 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

6 DUAL ACTION AIR SANDER

6 DUAL ACTION AIR SANDER 6 DUAL ACTION AIR SANDER Model 42966 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ

More information

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product. Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser

More information

Reciprocating saw attachment

Reciprocating saw attachment Reciprocating saw attachment Model 96635 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

1/2 CROWN AIR STAPLER

1/2 CROWN AIR STAPLER 1/2 CROWN AIR STAPLER Model 54753 ASSEMBLY AND OPERATION INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

3 AIR HIGH SPEED CUTTER

3 AIR HIGH SPEED CUTTER 3 AIR HIGH SPEED CUTTER 90114 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

300 Lbs. Motorcycle Scissor Lift

300 Lbs. Motorcycle Scissor Lift 300 Lbs. Motorcycle Scissor Lift 65318 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

metal detector 98760

metal detector 98760 metal detector 98760 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL

WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL WALL-MOUNT GARDEN HOSE REEL OWNER S MANUAL Perpendicular Mount Parallel Mount WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety

More information

2 Gallon, 100 PSI Oilless

2 Gallon, 100 PSI Oilless 2 Gallon, 100 PSI Oilless Air Compressor Model 47407 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

8 TON AIR/MANUAL FLAT BOTTOM JACK

8 TON AIR/MANUAL FLAT BOTTOM JACK 8 TON AIR/MANUAL FLAT BOTTOM JACK Model 95967 OPERATION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.

Important Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts. Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt

More information

3 COMPOSITE AIR CUT-OFF TOOL

3 COMPOSITE AIR CUT-OFF TOOL 3 COMPOSITE AIR CUT-OFF TOOL 95028 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

pneumatic dust collector

pneumatic dust collector pneumatic dust collector Model 96450 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

FLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS

FLOOR STAPLER. WITH HAMMER Model ASSEMBLY and OPERATING INSTRUCTIONS FLOOR STAPLER WITH HAMMER Model 93197 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight

More information

222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions

222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions 222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your

More information

1/4 COMPOSITE AIR DIE GRINDER

1/4 COMPOSITE AIR DIE GRINDER 1/4 COMPOSITE AIR DIE GRINDER 95029 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Offset head dual chuck

Offset head dual chuck Offset head dual chuck Tire inflator 90670 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

Bike Rack and Tire Carrier

Bike Rack and Tire Carrier Bike Rack and Tire Carrier OWNER'S MANUAL Rev: 10.26.2017 Page 1 Bike Rack and Tire Carrier Owners Manual TABLE OF CONTENTS System 2 Description 2 Prior To Operation 3 Manual Slide-Out Bike Rack Operation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS KIT CONTENTS: INSTALLATION INSTRUCTIONS PART NUMBER: DESCRIPTION: E361SXA302 roof MOUNT BICycle CARRIER SINGLE Short Carriage Bolt 1x Long Carriage Bolt 3x Over-Molded Wrench 1x Button Head Screw 2x Washer

More information

Portable Compressed CO 2 Regulator

Portable Compressed CO 2 Regulator Portable Compressed CO 2 Regulator 99901 Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

Ladies Shopper Bike Assembly Manual 28C03

Ladies Shopper Bike Assembly Manual 28C03 Ladies Shopper Bike Assembly Manual 28C03 Ecosmo Ltd 1 Know your bike 1. Wheel 2. Rear Derailleur 3. Chain 4. Crank Set 5. Pedal 6. Seat Quick Lock 7. Saddle and Post 8. Frame 9. Front Light 10. Front

More information

60 Drum Style Spike Aerator

60 Drum Style Spike Aerator 60 Drum Style Spike Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE

DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES DISASSEMBLING & REASSEMBLING CARTRIDGE INSTALLING SEATPOST ON BIKE OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations

More information

Air Hammer Model 32940

Air Hammer Model 32940 Air Hammer Model 32940 Assembly and Operation Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

More information

WORK TABLE CART OWNER S MANUAL

WORK TABLE CART OWNER S MANUAL WORK TABLE CART OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

HIGH WHEEL HOSE REEL CART OWNER S MANUAL

HIGH WHEEL HOSE REEL CART OWNER S MANUAL HIGH WHEEL HOSE REEL CART OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Bike Rack and Spare Tire Carrier 1-1/4" Receiver

Bike Rack and Spare Tire Carrier 1-1/4 Receiver Bike Rack and Spare Tire Carrier 1-1/4" Receiver OWNER'S MANUAL Rev: 11.15.2017 Page 1 Bike Tire Carrier 1.25 Owners Manual TABLE OF CONTENTS Safety Information 2 Product Information 2 Installation 3 Installation

More information

Final Assembly Instructions Bikes with 16 Wheel Size

Final Assembly Instructions Bikes with 16 Wheel Size Final Assembly Instructions Bikes with 16 Wheel Size Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-100. Club Volleyball Gear WARNING VOLLEYBALL SPIKE TRAINER Model # VST-100 Assembly Instructions Owner s Manual WARNING To ensure safety, do not attempt to assemble this system without following all instructions carefully. Check entire

More information

SUMMITTM 400 & 600. Natural Gas Barbecues. Step-By-Step Guide

SUMMITTM 400 & 600. Natural Gas Barbecues. Step-By-Step Guide SUMMITTM 400 & 600 Natural Gas Barbecues Step-By-Step Guide W E B E R W E B E R W E B E R W E B E R Summit 400 NG Summit 600 NG CANADIAN GAS ASSOCIATION R A P P R O V E D WARNING: Follow all leak check

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS KIT CONTENTS: PART NUMBER: DESCRIPTION: E361SXA300 ROOF MOUNT BICYCLE CARRIER B9 TRIBECA Short Carriage Bolt Long Carriage Bolt 3x Over-Molded Wrench Button Head Screw 2x Washer

More information

COOPER POWER SERIES. D-73P3 bypass switches installation instructions. Switches MN008005EN. Effective April 2016 Supersedes S June 2013

COOPER POWER SERIES. D-73P3 bypass switches installation instructions. Switches MN008005EN. Effective April 2016 Supersedes S June 2013 Switches MN008005EN Effective April 2016 Supersedes S328-120-1 June 2013 D-73P3 bypass switches installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY The information,

More information

EZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions

EZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions EZee Glider Manual Congratulations on your purchase of the EZee Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and

More information

8MAY15 US RACK, Inc Falcon Drive, Madera, CA

8MAY15 US RACK, Inc Falcon Drive, Madera, CA 8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following

More information

21 Gallon. Model Visit our website at:

21 Gallon. Model Visit our website at: 21 Gallon Cast Iron VERTICAL Oil-lubricated AIR COMPRESSOR Model 94667 OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to

More information

INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY

INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY INTRODUCTION BILL OF MATERIALS SPECIFICATIONS & TOOLS PROCEDURES OPERATION OF SEATPOST GIANT LIMITED WARRANTY 1 INTRODUCTION Congratulations on the purchase of your new GIANT CONTACT SWITCH seatpost. This

More information

Marine 6-Boat Free-Standing Racks SKU: Updated November 2011

Marine 6-Boat Free-Standing Racks SKU: Updated November 2011 Marine 6-Boat Free-Standing Racks SKU: 30-061 Updated November 011 Contains: Marine -Boat Free-Standing Racks (SKU 1-003) Marine 3 rd Boat Expansion Racks (SKU 1-0303) Marine Back Legs (SKU -001) 3 Sets

More information

Model OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein.

Model OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein. 2 GALLON 1.5 HP AIR COMPRESSOR Model 94724 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Backboard and Rim Owners Manual

Backboard and Rim Owners Manual REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Backboard and Rim Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Step Ladder - 8ft. (2.4

More information

Steel Spring Driven Reel Instruction Manual

Steel Spring Driven Reel Instruction Manual Steel Spring Driven Reel Instruction Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in

More information

ALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS

ALTERNATOR RACKS 135, 170 & 190 INSTRUCTIONS Figure A Item # Description Quantity 1 Alternator Rack 1 1 3 4 11 5 10 8 2 Lower Mount Kit (see detail) 2 3 16mm M5 Swivel-Mount Bolt 2 4 M7 Washer 2 5 M6 Lock Nut 2 6 Lock Washer 2 7 Swivel Mount 2 8

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory (ROOF) P/N 08L07-E09-100 Application 6 PILOT Publications No. Issue Date JUN 5 PARTS LIST 6 Washers Bicycle attachment 2 Brackets Hex wrench 4 Knobs 2 Keys 1 Rear Bracket

More information

PRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel

PRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel PRODUCT SUPPORT MANUAL YACHT BEAM 6M Searchlight Remote Control System with Joystick Remote Control Panel The Yacht Group - 4545 Ponce de Leon Blvd. Coral Gables FL 33146 Tel. 305.667.5811 - Fax. 305.663.5551

More information

Final Assembly Instructions Bikes with Quill Stems

Final Assembly Instructions Bikes with Quill Stems Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

RADROVER REAR RACK INSTALLATION MANUAL

RADROVER REAR RACK INSTALLATION MANUAL RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-400. Club Volleyball Gear

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-400. Club Volleyball Gear VOLLEYBALL SPIKE TRAINER Model # VST-400 Wall-mount Volleyball Spike Trainer with 28 height adjustment range Assembly Instructions Owner s Manual Club Volleyball Gear 18434 Technology Drive, Morgan Hill,

More information

Final Assembly Instructions Bikes with Threaded Headsets

Final Assembly Instructions Bikes with Threaded Headsets Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our

More information

Assembly Instructions. -Cantilever Boat Lifts

Assembly Instructions. -Cantilever Boat Lifts Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for

More information

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly.

Mini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly. Mini Glider Manual Congratulations on your purchase of the Mini Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and

More information

pneumatic air scraper kit

pneumatic air scraper kit pneumatic air scraper kit Model 95826 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

Model Read this material before using this product. Failure to do so can result in serious injury.

Model Read this material before using this product. Failure to do so can result in serious injury. BENCHTOP planishing hammer Model 97028 ASSEMBLY And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

USER MANUAL. DM65 Manual Flush/Tilt Combo Mount

USER MANUAL. DM65 Manual Flush/Tilt Combo Mount USER MANUAL DM65 Manual Flush/Tilt Combo Mount 1 D1_1.11.11.indd 1 ! CAUTION When using this mounting system, basic precautions should be followed, including: Follow the entire installation/user s manual

More information

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-300. Club Volleyball Gear. For fixed-height Basketball Hoop Systems

VOLLEYBALL SPIKE TRAINER. Assembly Instructions. Owner s Manual. Model # VST-300. Club Volleyball Gear. For fixed-height Basketball Hoop Systems VOLLEYBALL SPIKE TRAINER Model # VST-300 For fixed-height Basketball Hoop Systems Assembly Instructions Basketball Hoop System Not Included Owner s Manual Club Volleyball Gear 18434 Technology Drive, Morgan

More information

Owner s Manual. for. Manual Reel Mower. (Model MM-1)

Owner s Manual. for. Manual Reel Mower. (Model MM-1) Owner s Manual for Manual Reel Mower (Model MM-1) Sunlawn, Inc. 325 Garfield Street Fort Collins, CO 80524 Tel: 970-493-5284 FAX: 970-493-5202 For service inquiries, parts replacement, and maintenance

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory (ROOF) P/N 08L07-E09-100 Application 2013 CROSSTOUR Publications No. AII 13168 Issue Date NOV 2012 PARTS LIST 6 Washers Bicycle attachment 2 Brackets Hex wrench 4 Thumbwheel

More information

2018 ACCESSORY ATTACHMENTS OWNER S MANUAL

2018 ACCESSORY ATTACHMENTS OWNER S MANUAL 2018 ACCESSORY ATTACHMENTS OWNER S MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV031418 Welcome Thanks you

More information

2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift

2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift 2,500/4,000 LB Easy Riser Vertical Cable Feighner Lift CAUTION - PUT SAFETY FIRST 1. Before attempting to install or operate this lift, study and fully understand the proper operating procedures and safety

More information

S&S. Installation Instructions: S&S Stealth Air Cleaner Kit for Harley-Davidison Models With Stock Cable Operated Delphi EFI

S&S. Installation Instructions: S&S Stealth Air Cleaner Kit for Harley-Davidison Models With Stock Cable Operated Delphi EFI Instruction 510-0388 01-11-16 Version 1 Copyright 2016 by S&S Cycle, Inc. All rights reserved. Printed in the U.S.A. S&S Cycle, Inc. 14025 Cty Hwy G PO Box 215 Viola, Wisconsin 54664 Phone: 608-627-1497

More information

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal

USER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal Model No. FMEX81110.0 Serial No. Write the serial number in the space above for reference. USER S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please

More information

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)

HoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x) HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY

More information

OWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS

OWNERS MANUAL. Model Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS OWNERS MANUAL Model 2400 Shown with optional Primary Mooring Cleats. Portable Mooring System SAFETY OPERATION MAINTENANCE PARTS CAUTION: Before using your new Pier Tender, read rules for Safety, Operation,

More information

Santa Fe Cycles Assembly Guide Introduction

Santa Fe Cycles Assembly Guide Introduction Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and

More information

VERTICAL SURFBOARD CARRIER READ ME! IMPORTANT WARNING!

VERTICAL SURFBOARD CARRIER READ ME! IMPORTANT WARNING! VERTICAL SURFBOARD CARRIER ENG RRAC09 30 min READ ME! Thank you for purchasing a Front Runner Vertical Surfboard Carrier. Before you start, take a moment to familiarize yourself with this Fitting Instruction

More information

Trilogy Theory of Operation

Trilogy Theory of Operation INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...

More information

Operator s Safety Manual Sumner Max Jax / Beam Jax

Operator s Safety Manual Sumner Max Jax / Beam Jax May 2013 Operator s Safety Manual Sumner Max Jax / Beam Jax www.sumner.com 7514 Alabonson Road Houston, TX 77088 U.S.A ph: 281.999.6900 fax: 281.999.6966 75 Saltsman Drive Unit 5 Cambridge, ON N3H 4R7

More information

inspection, maintenance and cleaning procedures. Write the product s serial number in the back of the manual

inspection, maintenance and cleaning procedures. Write the product s serial number in the back of the manual Owner s Owner s Manual Manual & Safety Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, Save This Manual Keep this manual for the safety

More information

48 Piece Pneumatic Tool Kit

48 Piece Pneumatic Tool Kit 48 Piece Pneumatic Tool Kit Model 95034 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ

More information

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL ATD-8402 90LB PRESSURE BLASTER INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS FOR SANDBLASTER 1. Before opening the tank release the air pressure on the sand tank. To do this, turn off

More information

Retractable Hose Reel with 3/8" x 50' PVC Hose

Retractable Hose Reel with 3/8 x 50' PVC Hose Retractable Hose Reel with 3/8" x 50' PVC Hose Item# 4816153 Owner s Manual Assembly and Operation Instructions MADE IN CHINA Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before

More information

Parts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post.

Parts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post. NV 2.0 2 Parts: Outer Front Tire Tray Inner Front Tire Tray Outer Rear Tire Tray Inner Rear Tire Tray Pivot Assembly Trail Doc Clamp Trail Doc Post Included in the parts box: 6mm Allen Wrench M6 Lock Washer

More information

ST Shimano Total Integration. Technical Service Instructions. General Safety Information SI-6CT0B

ST Shimano Total Integration. Technical Service Instructions. General Safety Information SI-6CT0B Technical Service Instructions SI-6CT0B t ST-4400 Shimano Total Integration Shimano Total Integration Features The Shimano Total Integration TIAGRA series features a dual action control lever which actuates

More information