Ground Flat Stock & Drill Rod
|
|
- Vivien Murphy
- 5 years ago
- Views:
Transcription
1 NOW OFFERING 140 NEW SIZES TO THE INDUSTRY S BIGGEST SELECTION! NOW AVAILABLE 72" NUTEC42 72" A-2 GROUND FLAT STOCK EXPANDED DRILL ROD LINE Ground Flat Stock & Drill Rod Our conformance to specifications is the highest in the industry List Prices Effective October 7, 2013 (Supercedes Price List dated April 2, 2012)
2 Price List Effective October 7, 2013 PRECISION GROUND FLAT STOCK PRESCO Oil-hardening Ground Flat Stock AISI/SAE Type O SPECIALS PRODUCTION & ALTERED STANDARDS Non-standards are available from production for both Ground Flat Stock and Drill Rod...26 NEW 72" SIZES! NUTEC42 Pre-hardened Ground Flat Stock AISI Type 4142 Modified...10 SUPER-7 (Oversize) Air-hardening Ground Flat Stock AISI/SAE Type S NEW 72" SIZES! AIR-TRUE Air-hardening Ground Flat Stock AISI/SAE Type A ARISTOCRAT Air-hardening Ground Flat Stock AISI/SAE Type D MARSHALLCRAT Low-carbon Ground Flat Stock...21 PREMAR Stainless Steel Ground Flat Stock AISI/SAE Type RUETOM SPECIAL (Oversize) Stainless Steel Ground Flat Stock AISI/SAE Type PREMAR (Oversize) Stainless Knife Steel Ground Flat Stock AISI/SAE Type 440C...24 FIRECHROME (Oversize) Annealed Ground Flat Stock AISI/SAE Type H NEW SIZES! WATERCRAT Water-hardening Ground and Polished Drill Rod AISI/SAE Type W WATERCRAT Water-hardening Cold Drawn Drill Rod AISI/SAE Type W NEW SIZES! NEW SIZES! NEW SIZES! NEW SIZES! DRILL ROD OILCRAT Oil-hardening Ground and Polished Drill Rod AISI/SAE Type O AIR-TRUE Air-hardening Ground and Polished Drill Rod AISI/SAE Type A SUPER-7 Air-hardening Ground and Polished Drill Rod AISI/SAE Type S ARISTOCRAT Air-hardening Ground and Polished Drill Rod AISI/SAE Type D TRM-2 Annealed High-speed Drill Rod AISI/SAE Type M FIRECHROME 44 Hardened Ground and Polished Drill Rod AISI/SAE Type H NOTE: New sizes are highlighted in purple throughout the price guide. 3
3 Regular and Oversize tolerances are specified in this price list. GROUND FLAT TOLERANCES Thickness-Regular ±.001" Thickness-Oversize +.010/.015" Thickness-Metric +.05mm/-.00 Thickness - 72" Nutec 4142 ±.002 Thickness 72" A-2 +/-.001" Width-Regular +.000/.005" Width-Oversize +.010/.015" Width-Metric* +.2mm/-.000 Squares-Regular ±.001" Squares-Oversize +.010/.015" Length 18" +.125/.250" Length 24" /.375" Length 24" Stainless +.500/-.000 Length 36" +.250/.500" Length 72" /-.000 Squareness-Edge.003 per inch Squareness-End.004 per inch DRILL ROD TOLERANCES STANDARD TOLERANCE (SECTION) STRAIGHTNESS (MAX T.I.R. IN 12 ) STANDARD TOLERANCE (LENGTH) Round Drill Rod thru ±.0010".005" +1/8"/ thru dia. ±.0005".005" +1/8"/ and smaller dia. ±.0003".005" +1/8"/-.0 Flat and Square Drill Rod thru (largest dim.) ±.0015" +1/8"/ thru (largest dim.) ±.001" +1/8"/ and smaller ±.0005" +1/8"/-.0 Note: Closer tolerances than standard can be produced upon inquiry. Dimensional accuracy is very closely controlled within narrow limits. Precision-Marshall drill rod is guaranteed to the limits shown above. Machines can be set up for working to a certain tolerance with confidence that there will be no variation. *Widths of more than 50mm are blanchard ground The Precision-Marshall Guarantee of Quality Precision-Marshall s conformance to specifications is the highest in the industry. Precision-Marshall assumes complete liability for any costs directly relating to a deviation from our published specifications. Any such costs, properly documented, will be reimbursed. 4
4 PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1/64 x 1/ / / / / /32 x 1/ / / / / /64 x 1/ / / / / / /16 x 1/ / / / / / / / / / " Length 36" Length 5/64 x 1/ / / / / /32 x 1/ / / / / / / / /64 x 1/ / / / / /8 x 1/ / / / / / / / / / / /
5 PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1/8 x /64 x 1/ / / / /32 x 5/ / / / / / / / / / /16 x 3/ / / / / / / / / / / / " Length 36" Length 7/32 x 7/ / / / / / /4 x 1/ / / / / / / / / / / / / /32 x 9/ / / / / /16 x 5/ / / / /
6 PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 5/16 x / / / / / /8 x 3/ / / / / / / / / / / /16 x 7/ / / / / / /2 x 1/ / / / " Length 36" Length 1/2 x 1-1/ / / / / /16 x 9/ / / / /8 x 5/ / / / / / /4 x 3/ / / / / / / , , /8 x 7/ /
7 PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 7/8 x 1-1/ x / / / / / , , , /8 x 1-1/ / PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1-1/8 x /4x 1-1/ / / /2 x 1-1/ / , , x , /2 x 2-1/ , OVERSIZE TOLERANCE 18" Length 36" Length 1/8 x 1/ / / / / /16 x 3/ / / / / / / /4 x 1/ " Length 36" Length 1/4 x 1/ / / / / / / /16 x 5/ / / / / / /
8 PRESCO Oil-hardening Ground Flat Stock AISI/SAE TYPE 0-1 OVERSIZE TOLERANCE 18" Length 36" Length 5/16 x / /8 x 3/ / / / / / / / /2 x 1/ / / / / / PRESCO (Metric) Oil-hardening Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1/2 x /8 x 5/ / / / / /4 x 3/ / / / x / / / METER (1000 mm) = INCHES mm 1 Meter Length 3 x x mm 1 Meter Length 5 x x mm 1 Meter Length 8 x x
9 NUTEC42 Pre-hardened Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1/16 x 1/ / / /32 x 1/ / / /8 x 3/ / / / / / / / / /16 x 3/ / / / / / / / / / /4 x 1/ / / / / / " Length 36" Length 1/4 x 1-1/ / / / /16 x 5/ / / / / / / / / / /8 x 3/ / / / / / / / / /2 x 1/ / / / / /
10 NUTEC42 Pre-hardened Ground Flat Stock AISI/SAE TYPE " Length 36" Length 1/2 x / / /8 x 5/ / / / / /4 x 3/ / " Length 36" Length 3/4 x 1-1/ / / / , x / / / / / , , NEW SIZES! NUTEC42 (72" Length) Pre-hardened Ground Flat Stock AISI/SAE TYPE " Length 1/8 x 1/ / / / / /16 x 1/ / / / / Length /4 x 1/ / / / / /16 x 5/ / / / / / Length /8 x 3/ / / / / / /2 x 1/ / / /
11 NEW SIZES! NUTEC42 (72" Length) Pre-hardened Ground Flat Stock 72" Length 1/2 x / /8 x 5/ / / Length , /4x 3/ / , Length 1 x / / / , , Super-7 (Oversize) Air-hardening Ground Flat Stock AISI/SAE TYPE S-7 OVERSIZE TOLERANCE 18" Length 36" Length 1/8 x 1/ / / / / /32x 1/ / / / / /16 x 1/ / / / / /4 x 1/ / / " Length 36" Length 1/4x 1-1/ / / /4 X /4 X /16 x 1/ / / / / /8 x 1/ / / / / / /2 x 3/ / / /
12 AIR-TRUE Air-hardening Ground Flat Stock AISI/SAE TYPE A-2 18" Length 36" Length 3/64 x 1/ / / / /16 x 1/ / / / / /64 x 1/ / / / /32 x 1/ / / / / /64 x 1/ / / / /8 x 1/ / / / / / / / " Length 36" Length 1/8 x 2-1/ / /32 x 1/ / / / / / / /16 x 3/ / / / / / / / / / /32 x 1/ / / / /
13 AIR-TRUE Air-hardening Ground Flat Stock AISI/SAE TYPE A-2 18" Length 36" Length 1/4 x 1/ / / / / / / / / / / /16 x 5/ / / / / / / / / / /8 x 3/ / / / / / / / / " Length 36" Length 3/8 x , /2 x 1/ / / / / / / / , , /8 x 5/ / / / / , , /4 x 3/ / / / / /8 x 7/ / /
14 AIR-TRUE Air-hardening Ground Flat Stock AISI/SAE TYPE A-2 18" Length 36" Length 7/8 x 2-1/ x / / / / /4 x 1-1/ / / " Length 36" Length 1-1/4 x , , , /2 x 1-1/ / , / , , , , x / , , , NEW SIZES! AIR-TRUE (72" Length) Air-hardening Ground Flat Stock AISI/SAE TYPE A-2 72" Length 1/8 x 1/ / / / /16 x 1/ / / / " Length 1/4 x 1/ / / / /8 x 1/ / / / " Length 1/2 x 1/ / / /
15 AIR-TRUE Air-hardening Ground Flat Stock AISI/SAE TYPE A-2 OVERSIZE TOLERANCE 18" Length 36" Length 1/8 x 1/ / / / / / / / / / /32 x 1/ / / / / /16 x 3/ / / / / / / / / / /4 x 1/ / " Length 36" Length 1/4 x 3/ / / / / / / / / / /16 x 5/ / / / / / / / / / /8 x 3/ / / / / / / / / /
OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationthreaded rod Keystock Diamond Case Linear Shafting strapping seals tools
threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationWagner Die Supply W A G N E R P U N C H E S ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL. Diemaking & Diecutting Source and Resource
W A G N E R P U N C H E S www.wagnerdiesupply.com ONTARIO, CA TACOMA, WA DALLAS, TX ELMHURST, IL America s Punch Experts - Since 1947. Since we opened our doors in 1947, Wagner has focused on providing
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationTAZGO DIVISION. Available Services: Shearing, Plate Burning, Saw Cutting, Drilling
TAZGO DIVISION STEEL~STAINLESS~ALUMINUM Beams ~ Channel ~ Flat bar ~ HR Rounds ~ CR Rounds Angle ~ Square Tube ~ Rectangle Tube Pipe~ DOM~ Plate~ HR sheets ~ CR sheets~ Galvanized Sheets ~ Cross Members
More informationQuality Cutting Tools Carbide Tipped Solid Carbide 2009
Quality Cutting Tools Carbide Tipped Solid Carbide 2009 Keyseats Counterbores End Mills Drills Reamers INDEX BY NAME 2 INDEX OF PRODUCTS PAGE SHANK CUTTERS Chamfer Cutters 17 Corner Rounding Cutters 18
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationProtoTrak Knee Mill Model K3 ~ EMX Control 2 - Axis CNC ~ 3 - Axis DRO
P# 0 DRILL 1/4" DIA. X.20 DP. (4) EQUALLY SPACED ON A.530 DIA. B.H.C. 1.625 DIA 1/8" SLOT X.05 DEEP (2).6875 RAD.5625 RAD.5962 Events ID On Print 10 Points.1875 Tool List 10 Points Events ID On Print Plot
More informationA Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationunittool punch & die company TOOLING for Fabricating & Duplicating Type Machines H&O DIE SUPPLY, INC
CATALOG F&D-91 TOOLING for Fabricating & Duplicating Type Machines INTRODUCING New! 1/2" & 5/8" Drop In Tooling unittool punch & die company TOOLING FOR FABRICATING & DUPLICATING TYPE MACHINES Manufactured
More informationDigital Finishing Group
Titan 600 Slit, cut, crease, 2-dimensional perforation in one sheet pass High versatile, high productive and extremely low cost Proudly designed and manufactured in the U.S.A. The Titan 600 can make up
More informationSelective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric
THE INNOVATOR OF OUR INDUSTRY Selective Fit Pins and Bushings Precision Guiding for Dies Innovation, Quality, and a Full Line, both Inch and Metric Protected by U.S. and International Patents Overview
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
More informationF13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F13.11 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General...F13.11.03
More informationEffective September, 2005 Copyright 2005 PAGE
-42 DTX Junction Boxes: Dust-Ignitionproof, Watertight Cast iron box and cover for surface mounting. Cast aluminum box and cover for surface mounting. Applications DTX dust tight and watertight boxes are
More informationMelin Tool Micro Catalog
MICRO END MILL TOOL CATALOG Micro sized solid carbide end mills & drills Melin Tool Micro Catalog» New Micro 3 Flute Series» Over 3000 MICRO items INSIDE» Expanded manufactering facility & product line
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationEngineered Valves Group. Revision 2. FABRI-VALVE High Performance Knife Gate Valve.
Engineered Valves Group XS 150 Revision 2 FABRI-VALVE High Performance Knife Gate Valve www.engvalves.com Fabri-Valve XS150 High Performance Knife Gate Valve XS150 High Performance Knife Gate Valve T he
More informationDrop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated
Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation
More informationl DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
More informationXCE: Explosionproof Control Enclosures
XCE SERIES XCE: Explosionproof Control Enclosures FEATURES 64 standard sizes available Pre-drilled for hinges (hinges optional) Pre-drilled for sub-panel (sub-panel optional) One-piece, NEMA 4 water-tight
More informationTHE MANUFACTURER ADVANTAGE
MICRO END MILL TOOL CATALOG Micro sized solid carbide end mills & drills THE MANUFACTURER ADVANTAGE get to know who makes your micros Melin Tool Micro Catalog»» New Micro 3 Flute Series»» Over 3000 MICRO
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationPRECISION END MILL HOLDERS
PREISION EN MILL HOLERS High ccuracy Royal end mill holders are among the most accurate on the market: - Runout is guaranteed to be < 0.0002" TIR - Tapers are ground to T-3 specifications or better to
More informationThese products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have
More informationExtended Family. Titleist Forged Irons. Forged for Feel and Precision. Forged 1025 Mild Carbon Steel. Forged 410 Stainless Steel
F O R G I N G E X C E L L E N C E T I T L E I S T F O R G E D I R O N S Titleist Forged Irons Titleist has a rich forged iron history. That s because Titleist irons have been trusted by many of the world
More informationCOMPETITION EQUIPMENT. Enjoy the game
COMPETITION EQUIPMENT Enjoy the game Competition Equipment The only board approved by FINA for world championships Powered by DURAFLEX aluminium springboards have been used exclusively in all Olympic diving
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationOutlet Structures T-12
Description This section provides guidance and details for outlet structures for use primarily with BMPs utilizing sedimentation, (i.e., extended detention basins (EDBs), retention ponds, and constructed
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationproduct manual H-1200 & H-1250 Universal and Portable Penetrometers
07.09 product manual H-1200 & H-1250 Universal and Portable Penetrometers Introduction Universal Penetrometer H-1200 Direct-reading instrument for precision penetration measurements of bituminous materials,
More informationINTRODUCTION. Disclaimer
3 INTRODUCTION The Steel Framing Industry Association (SFIA) was formed with the objective of assisting companies having interests in the cold-formed steel framing industry to be more successful by unifying
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationCOMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
More informationEverything you need to know about flatteners and levelers for coil processing
http://www.thefabricator.com/xp/fabricator/articles/fabricating/fabricating03/02web56 9.xml Provided by: Welded Tube Pros LLC, www.weldedtubepros.com Doylestown, OH. Tel: 330-658-7070 Email contact for
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationIEEE RAS Micro/Nano Robotics & Automation (MNRA) Technical Committee Mobile Microrobotics Challenge 2016
IEEE RAS Micro/Nano Robotics & Automation (MNRA) Technical Committee Mobile Microrobotics Challenge 2016 OFFICIAL RULES Version 2.0 December 15, 2015 1. THE EVENTS The IEEE Robotics & Automation Society
More informationRunning Track Certification. ASBA Technical Meeting December 2013
Running Track Certification ASBA Technical Meeting December 2013 Number of tracks in US (roughly) 2001 US Dept of Education (digest of educational statistics) 26,500 public high schools, 10,500 private
More informationDimensionair Air Gages Air Plugs. Features. Plug identification. Ordering Information Millimar. Air Gaging Instruments
7-56 Dimensionair Air Gages Air Plugs Features Calibrated I.D. tooling for the Dimensionair Air Gaging Systems Tooling is interchangeable without adjusting system magnification. Federal Air Plugs have
More informationMini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements on a strut system. Channel Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm)
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationPART 3 MODULE 6 GEOMETRY: UNITS OF GEOMETRIC MEASURE
PART 3 MODULE 6 GEOMETRY: UNITS OF GEOMETRIC MEASURE LINEAR MEASURE In geometry, linear measure is the measure of distance. For instance, lengths, heights, and widths of geometric figures are distances,
More informationfor Cold-Formed Steel Framing Products
Technical Guide for Cold-Formed Steel Framing Products The data in this guide is based upon the 2007 American Iron and Steel Institute s S00-07 North American Specification for the Design of Cold-Formed
More informationMilling Cutters & Saws
Milling s & Saws Side Milling s High Speed Steel Plain & Tooth Plain 2 1/2 3/16 14 603220 2 1/2 1/4 14 603221 2 1/2 5/16 14 603222 2 1/2 3/8 14 603223 2 5/8 3/16 14 603224 2 5/8 1/4 14 603225 2 5/8 5/16
More informationThe total solution for Extruded aluminium components
The total solution for Extruded aluminium components Extrusions can be supplied in small or large order quantities with an exceptionally fast turnaround; Capalex is THE first choice for your standard profile
More informationIntroduction. Steel balls. Cage
Introduction linear rail.advantages. - Consists of a robust table and frame equipped with precision balls - Simplicity of design and compact size ensure optimum performance Table End plate Frame Steel
More informationThermcraft Tube Furnace General Use
Page 1 of 9 Thermcraft Tube Furnace General Use The Thermcraft furnace is a general use, 3 zone tube furnace capable of reaching temperatures of 1200 C. The large 6 diameter quartz tube is capable of holding
More information27,000 SIZES 2,000 MATERIALS ENDLESS POSSIBLITIES WASHERS 2013 CATALOG
27,000 SIZES 2,000 MATERIALS ENDLESS POSSIBLITIES WASHERS 2013 CATALOG Washers, Spacers and Shims Made to Order Choose from a wide variety of sizes and materials with no tooling charges when you order
More information3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring
More informationTwo Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
More informationR.J.W. LTD. Motorised CNB USER MANUAL. 10. Safe Operation Procedure for cutting Charpy/Izod Notch
10. Safe Operation Procedure for cutting Charpy/Izod Notch 10mm Specimen with 2mm V Notch Caution notes a) DO NOT STALL THE MACHINE! ATTEMPTING TO CUT A MATERIAL WHICH IS TOO HARD OR USING A BROACH WHICH
More informationSwage Socket (open)...86 Swage Button...87 Swage Socket (closed)...87 Swaging Sleeve for Flemish Eye...88 Mid Grip Clips...89 Wire Rope Clips...
Swage Socket (open).........................86 Swage utton...............................87 Swage Socket (closed).......................87 Swaging Sleeve for lemish ye................88 Mid Grip lips..............................89
More informationINTRODUCING SCHEDULE. Lawful owner Stefano Gollini. The paragraphs preceded by this symbol, if not respected can lead to damages to the machine
RIBAGAS Page. 2 of 5 ART. 1 0 7 0 RIBAGAS 4 INTRODUCING SCHEDULE REGISTER N YEAR STATEMENT OF CONFORMITY UR Chill Tech. srl DECLARE UNDER ITS OWN RESPONSIBILITY THAT THE ABOVE MENTIONED MACHINE SUITS THE
More informationSae 4 Bolt Flange Port Dimensions
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with sae 4 bolt flange port
More informationNUT EYEBOLTS Available in 304 & 316 Stainless Steel
Forged Industrial Hardware NUT EYEBOLTS Available in 304 & 316 Stainless Steel In Stock / Immediate Delivery No Minimums Plain and Shoulder Pattern Available Sizes: Plain: 1/4-2 to 24 Shoulder: 1/4-1-1/2
More informationCHEMICAL. Straight cut rod is provided in the materials listed below and includes nuts / washers.
161 STRAIGHT CUT ROD Straight cut rod is provided in the materials listed below and includes nuts / washers. Straight Rod 22-1/2 Bent Rod A 307 THREADED ANCHOR ROD, ZINC PLATED (ASTM B633, CLEAR CHROMATE)
More informationVisit: 27
Visit: http://www.kwrs.com 7 SINGLE PART SLINGS Eyes are typically formed using a flemish eye splice. The ends are secured by pressing a metal sleeve over the ends of the strands of the splice. Pull follows
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationAnderson Greenwood Type 4142 piped away pressure relief valves
7 Anderson Greenwood Type 4142 piped away pressure relief valves High capacity weight or spring loaded pressure relief valves that pipe away to a closed header system. Designed to work closer to a tank's
More informationBSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested)
Approved 34802;34803;36922;37662 1,2 34802 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build
More informationV-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1
ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH
More informationOH MARINE EQUIPMENT made to last
OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationfor Cold-Formed Steel Framing Products
Technical Guide for Cold-Formed Steel Framing Products Technical Data in this publication is applicable to the following SFIA Member Company: For a complete directory of SFIA Members who are certified
More informationINDUSTRIAL CUTTING EQUIPMENT
INDUSTRIAL CUTTING EQUIPMENT Catalogue : NIWC 1046 We reserve the right to introduce changes to our product range and /or designs without prior notice Cold Cutting Equipment Section No. Description Colour
More informationAUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for
More informationThe SAG type flat, rubber-steel, balance ropes
ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines
More informationApproved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong
Approved 8380;8500 2 8380 phenolic/novolac epoxy ^(ValidationDate). 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. Specially designed tank coating with excellent
More informationHarvard Trip Balance BA710. Impact Test Equipment Ltd & User Guide. User Guide
Harvard Trip Balance BA710 Impact Test Equipment Ltd www.impact-test.co.uk & www.impact-test.com User Guide User Guide Impact Test Equipment Ltd. Building 21 Stevenston Ind. Est. Stevenston Ayrshire KA20
More informationSEMFWE SQA Unit Code H1W9 04 Forming platework using power rolling machines
Overview This standard identifies the competencies you need to bend and form plate for fabrications in accordance with approved procedures using power operated pinch or pyramid rolls which may be hand
More informationEast Building, PHH-30 U.S. Department New Jersey Avenue S.E. of Transportation Washington, D.C DOT-SP (TENTH REVISION)
East Building, PHH-30 U.S. Department 1200 New Jersey Avenue S.E. of Transportation Washington, D.C. 20590 Pipeline and Hazardous Materials Safety Administration DOT-SP 11025 (TENTH REVISION) EXPIRATION
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24
15720;15760 1 15720 novolac epoxy VValidationDate). 1 Product description This is a two component amine cured novolac epoxy coating. It is a light coloured conductive coating with very good chemical resistance.
More informationProcedia Engineering Procedia Engineering 2 (2010)
Available online at www.sciencedirect.com Procedia Engineering Procedia Engineering 2 (2010) 002681 2686 (2009) 000 000 Procedia Engineering www.elsevier.com/locate/procedia 8 th Conference of the International
More informationVan Staal NO LIMITATIONS
Van Staal NO LIMITATIONS There are select types of fishermen who strive to push themselves and their equipment to the limit. These fishermen have passion that demands more than ordinary fishing tackle.
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
More informationFASTENERS, CLAMPS & STRAPS
Bands...169 Buckles...170 Cable Ties...171 Clip, Ring & Pin Kits...168 Clips, Rings & Pins...168 Hose Clamps...170,171 Screw Anchor Expanders...168 Strap Tensioners & Adaptors...172 Tie Wire...172 Tie
More informationIf a fair coin is tossed 10 times, what will we see? 24.61% 20.51% 20.51% 11.72% 11.72% 4.39% 4.39% 0.98% 0.98% 0.098% 0.098%
Coin tosses If a fair coin is tossed 10 times, what will we see? 30% 25% 24.61% 20% 15% 10% Probability 20.51% 20.51% 11.72% 11.72% 5% 4.39% 4.39% 0.98% 0.98% 0.098% 0.098% 0 1 2 3 4 5 6 7 8 9 10 Number
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationVSL MINING & TUNNELING SYSTEMS VSL. mining and tunneling
VSL MINING & TUNNELING SYSTEMS VSL mining and tunneling VSL Mining & Tunneling Bolt systems VSL offers three type of bolting system for the mining & Tunnelling industry VSL-S Solid Threaded bolts. Continuous
More informationDorsey Standard Bore Gages
Dorsey Standard Bore Gages A time proven design made better by Dorsey This design of rugged production line bore gages has been an industry standard for more than 75 years. Dorsey offers precise replacement
More informationSection 3000 CONVEYOR CHAIN LUBRICATION SCHEMATIC...39 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR Section 3000 Index
Section 3000 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR...36 Versatile type of lubrication able to feed liquid to elevated, distant or inaccessible points. CONVEYOR CHAIN LUBRICATION SCHEMATIC...39
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationSKF Transmission chain
SKF ransmission chain Standard and compliance SKF s are manufactured in state of the art facilities. ight quality controls are employed to assure product conformance to the ISO standards and the existing
More informationSPOKES & NIPPLES FOR BICYCLE 2017
SPOKES & NIPPLES FOR BICYCLE 2017 HISTORY AND PRESENT Based in Lomagna, in the heart of Lombardy, Alpina Raggi S.p.A. was founded in 1926 and focusses its activity on the production of spokes and nipples.
More informationInfo Counting chamber (haemacytometer)
Info Counting chamber (haemacytometer) 1. What is a counting chamber and what is it used for? A counting chamber is a precision measuring instrument made of special optical glass. It is used to count cells
More informationRoadNews 14 // September VÖGELE pavers rehabilitate race track in Brno, Czech Republic. Paving at Top Speed
VÖGELE pavers rehabilitate race track in Brno, Czech Republic. Paving at Top Speed VÖGELE pavers rehabilitate race track in Brno, Czech Republic. Paving at Top Speed Seite 1/11 Job Site Details 1/2 Rehabilitation
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More information1. KNOBBED CYLINDERS (CYLINDER BLOCKS)
1. KNOBBED CYLINDERS (CYLINDER BLOCKS) Visual Sense: Discrimination of Size, Matching Material: Four blocks, each containing ten cylinders with knobs, with each cylinder fitting into its respective hole
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More information