Wipers. Product Description: Part Numbers: Wipers. Imperial Seals
|
|
|
- Evangeline Willis
- 6 years ago
- Views:
Transcription
1 Imperial Seals Materials: Temp. Range Urethane -54 to 105 Highly Saturated Nitrile -40 to 160 Viton /Fluorocarbon -26 to 204 PEEK -70 to 260 Hytrel -54 to 149 Nitrile -40 to 120 T S X N dditional styles such as Seal Guard, Trailmobile and Hyster are available upon request. K H Product escription: are primarily designed to stop contaminants from entering a cylinder on the rod, however, they can also act as a secondary rod seal. If contaminants were to enter a cylinder it could lead to damage of the rod and/or other sealing components. properly selected wiper could help reduce the need for unscheduled maintenance and even increase the time between maintenance cycles. It is important to determine the correct style and material for an application. Hi-Tech Seals standard wiper material is urethane, however, Nitrile, HNR, Viton, PEEK and Hytrel wipers are available. When selecting the material for a wiper, remember to consider: required abrasion resistance, elasticity, resilience and fluid compatibility. s: W Wiper Prefix - Material - if other than Urethane (Nominal) Example: WN Urethane N-Style Wiper, Gland with 1-1/4 Nom. I
2 Imperial Seals T,, S and X styles R Max. T are a one piece snap-in type rod wiper designed for medium duty applications. The outside lip provides improved O.. ingression resistance. The T style wiper lip reduces apparent rod seal leakage with equivalent ingression resistance to a sharp lip wiper * T,, S and X are all available in the sizes listed below. W prefix most commonly represents Hi-Tech Seals T style wiper. * W W W W W W W W W W W W W W W W W W W W W W W W W * W W W W W W W W W W W W W W W W W W W W W W W W W
3 Imperial Seals T,, S and X Styles T S X * T,, S and X are all available in the sizes listed below. W prefix most commonly represents Hi-Tech Seals T style wiper. For specific styles or materials please contact Hi-Tech Seals. * W W W W W W W W W W W W W W W W W W W W W W W * W W W W W W W W W W W W W W W W W W W W W W
4 N - Style Imperial Seals R Max N are a light duty snap-in wiper that will retrofit into glands prescribed in MS WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN
5 Imperial Seals N - Style WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN WN
6 Imperial Seals K - Style R Max K Style are a one-piece snap-in type rod wiper, designed for medium duty applications. This style acts as a secondary rod seal x 1/64 hamfer WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK WK
7 Imperial Seals R Max H - Style H Style are a one piece snap-in type rod wiper designed for medium duty applications. This style acts as a secondary rod seal. The U-cup lip provides a reduction in apparent rod seal leakage while maintaining equivalent ingression resistance to a sharp lip wiper. WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH
8 Imperial Seals H - Style WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH WH
9 Imperial Seals R Max Metal Encased Style Style Metal Encased are created with a Nitrile (N) or Urethane (U) element encased in a high quality steel metal retainer. The Metal lad lip is rigid enough to handle tough scraping environments such as dry/wet mud, and ice, yet sensitive enough to exclude fine dust and/or moisture. Material W N W U W N W N W U W N W N W U, N W U W N W N W U W N W N W N W N W U W N W N W N W U W U W N W N Material W U, N W U W N W N W N W N W U W N W N W N W U,N W U W U W U W N W U W N W U, N W U W U W U W N W U W U 41
10 Imperial Seals - Metal Encased Style Material W N W N W U W U W U W N W U W N W N W U W U W N W U W U, N W U W U W N W U W U W U W U W U W N W N W U W U W U Material W N W U W U W U W U W N W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U W U Metal encased wipers are typically stocked in Nitrile (N) or Urethane (U), however, additional materials and sizes are available. 42
Loaded U-Cups. Product Description: Part Numbers: Loaded U-Cups. Imperial Seals. O-Ring Loaded w/ Beveled Lip. O-Ring Loaded
Imperial Seals Seal Materials: Temp. Range Urethane -54 C to 105 C Viton /Fluorocarbon -26 C to 204 C Hytrel /Fluorotrel -54 C to 149 C Carboxylated Nitrile -20 C to 135 C Highly Saturated Nitrile -40
Loaded U-Cups. Product Description: Part Numbers: - Loaded U-Cups. Imperial Seals. O-Ring Loaded w/ Beveled Lip. O-Ring Loaded
Imperial Seals Seal Materials: Temp. Range Polyurethane -54 C to 105 C Viton /Fluorocarbon -26 C to 204 C Hytrel /Fluorotrel -54 C to 149 C Carboxylated Nitrile -20 C to 135 C Highly Saturated Nitrile
Loaded U-Cups. Product Description: Part Numbers: - Loaded U-Cups. Imperial Seals. O-Ring Loaded w/ Beveled Lip. O-Ring Loaded
Seal Materials: Temp. Range Polyurethane -54 C to 105 C Viton /Fluorocarbon -26 C to 204 C Hytrel /Fluorotrel -54 C to 149 C Carboxylated Nitrile -20 C to 135 C Highly Saturated Nitrile -40 C to 160 C
Rectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
U-CUP SELECTION GUIDE
U-CUP SELECTION GUIDE ISO 9001 REGISTERED CONTENTS Introduction 1 Seal Selection 2 Profiles 3 Part Numbering 4 Specifying A Seal 5 Gland Dimensions vs Seal Dimensions 6 Design Criteria 7 Design Criteria
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
Engineered Valves Group. Revision 2. FABRI-VALVE High Performance Knife Gate Valve.
Engineered Valves Group XS 150 Revision 2 FABRI-VALVE High Performance Knife Gate Valve www.engvalves.com Fabri-Valve XS150 High Performance Knife Gate Valve XS150 High Performance Knife Gate Valve T he
Rod DISOGRIN Asymmetrical U-Cup Rod series U-cup with an asymmetrical profile of the sealing lips,
Industrial Seal Inc. offers a wide range of hydraulic and pneumatic rod seal profiles to meet the broad demands of the fluid power industry. These rod seals are offered in a variety of compounds and lip
Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
SIX R (P ) AND SEVEN R (P ) POSITION CYLINDERS Service Information
SIX R431006322 (P -063892-00001) AND SEVEN R431006321 (P -063981--00002) POSITION CYLINDERS Service Information The six and seven position cylinders are medium duty pneumatic positioning devices that operate
TYPE ECS SEAL METAL BELLOWS DRY-RUNNING SECONDARY CONTAINMENT Technical Specification
Low Temperature Design A Spacer Ring B Compression Ring C Retaining Ring D Wave Spring E O-ring F ent/drain Connection G Seat/Mating Ring H Insert I Bellows Assembly J Housing A K Spacer B F G H I C D
Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )
Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm
Inline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
CKL2 Series. Powerful chuck. Operational stroke length: 5, 6, 8, 10, 12, 16, 20, 23mm. Specifications. Switch specifications
RV* FH1 G B FH G A S Specifications Descriptions Size Cylinder bore size mm Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
Selection Materials. Check of Conditions When Using Hydraulic Cylinders 11. Selection of Cylinder Bore 12. Selection of Sealing Material
Materials Materials Check of Conditions When Using Hydraulic Cylinders of Cylinder Bore of Sealing Material Materials Check of Conditions When Using Hydraulic Cylinders Items Contents Materials. Set pressure
VESSEL & REACTOR VALVES. VS Series SPRAY & RINSE VALVES PROCESS VALVES
VS Series VESSEL & REACTOR VALVES SPRAY & RINSE VALVES PROCESS VALVES CLEANING VESSELS OR REACTORS WITHOUT OPENING TO ATMOSPHERE Spray & Rinse Valves Code: VRR-VRS Automatic models use an electric or air
Hose & Fitting Products
AB SEALS ABN 14 602 544 632 3 WELCH ST UNDERWOOD QLD 4119 Ph 07 3341 1200 Fax 07 3341 9399 Email sales@abseals.com.au SEALS YOU CAN RELY ON Hose & Fitting Products Effective 1 ST January 2015 Ver 14.12.03
SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.
qwer Air and Inert Gas Valves Brass, or Stainless Steel Bodies 1/" to 1" NPT Features Designed solely for installation in intrinsically safe areas, with properly approved and sized current and voltage-limiting
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
A18W35_MASE 130_F_EN MANUAL
A18W_MASE 10_F_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
Model GPR Primary Pressure Regulating Valve. Instruction Manual
Model GPR-2000 Primary Pressure Regulating Valve Instruction Manual Please read this instruction manual thoroughly before using the primary pressure regulating valve, so that you may do so correctly and
EBR. Metric. ClaronPolyseal Piston Bearing Rings. Nominal Dimensions & Machining Tolerances. Claron Part Number. Ød ØG
EBR EBR 32 EBR EBR 46 EBR 32 46 Piston Bearing Rings EBR mm +0.0-0.05 >mm +0.0-0.08 Ø 19 26 34 44 H9 ±0.20 ±0. ØG 22 29 37 43 47 EBR /1 EBR 55 EBR EBR 63 EBR 55 63 44 49 54 57 59 1 1 1 1 1 47 52 57 62
Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
MAINTENANCE FOR THE MODEL 210B-2 SRA
SAFETY PRECAUTIONS FOR THE System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris: During boring, chips may be ejected. Stay behind
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
Pneumatic retractable fitting for simple commercially available control units or process applications
Pneumatic Retractable Fittings hem Energy Pharm Food Water SensoGate W 3 Pneumatic retractable fitting for simple commercially available control units or process applications Variable and reasonably priced
Superiorities of MTB Breakers
Superiorities of MTB Breakers The hydraulic accumulators do not need N2 gas charging on the working site. Normally, MTB accumulators can be used for 2 years or longer without charging. On the other hand,
Diaphragm Series Pressure Gauge
Diaphragm Series Pressure Gauge Product Overview Diaphragm pressure gauge (chemical seals) is composed of a conventional pressure measuring instrument,a connector and a diaphragm seal. This combination
LEVEL Transmitters. ) of the liquid column above it and the atmospheric pressure (P atm
Hydrostatic level transmitters nivopress N GENERAL DESCRITION The NIVORESS N hydrostatic level transmitters are designed to measure the level of clean or contaminated liquids. The pressure sensor at the
DEWATERING PUMP SOLUTIONS. Pneumatic pumps
DEWATERING PUMP SOLUTIONS Pneumatic pumps PUMP UP YOUR BUSINESS A pneumatic pump is a great choice when failure is not an option. They re easy to use, safe and can handle almost anything you throw at them.
DI-DRO ADVANCED FORMING SYSTEMS
DI-DRO ADVANCED FORMING SYSTEMS WE PARTNER WITH YOU We partner with you to provide force-generating products and solutions to lower your costs and increase your productivity in the forming of manufactured
(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
FH500 Series. Open and close angle: 20 at open, -5 at closed. FH510-D FH512-D FH516-D FH520-D FH510-O FH512-O FH516-O FH520-O Actuation.
RV* FH G G FH G N/ S/F Specifications Double acting/single acting FH Series Open and close angle: at open, - at closed FH FH-D FH-D FH-D FH-D FH-O FH-O FH-O FH-O Actuation Double acting Single acting Working
Cut Protection and Abrasion Sleeves
52 02.4 Cut Protection and Cut Protection Sleeves 54-65 secutex 56-59 NoCut sleeve 58-61 62-63 Buffer Products 64-65 53 02.4 CUT PROTECTION AND ABRASION SLEEVES Cut Protection Sleeves secutex NoCut sleeve
Precision Rotary Airlocks and Diverter Valves
Precision Rotary Airlocks and Diverter Valves Utilizing over 40 Years of Mac Process Bulk Material Conveying Technology Airlocks and Diverters Schenck Process offers a wide range of airlocks and diverter
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
A17W23_MASE_MUS_EN MANUAL
A1W2_MASE_MUS_EN MANUAL CONTENTS 1 Identification 1.1 Manufacturer 1.2 Product name 1. Year of manufacture 1. Area of use 2 Technical specification 2.1 Design 2.2 Function 2. Technical data 2. Security
Pilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
REL-510H WARNING NOTICE 12 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD
OPERATORS ORS GUIDE REL-510H 12 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD Compatible with U style and RELIABLE R12 shell type 12 ton compression dies. RELIABLE EQUIPMENT & SERVICE CO., INC. 92 Steamwhistle
STRAIGHT CONNECTOR 5 80 N N N N N N N. Copyright 2016 by K-net All Rights Reserved
STRAIGHT CONNECTOR The Push-fit straight connectors make splicing microduct fast and easy. Simply push the microduct into the center of the connector. No tools are required. The connector can be connected
Product Data Screwed Valves
Screwed Valves Brass and Chrome PVC Stainless Steel Flow Control Check Valves - 15mm Flow Control Check Valves - 25mm AUSTRALIA Maric Brass & Chrome Screwed Valves p. 28 Availability & Specifications Maric
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS TYPE BV2-LD
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS TYPE BV2-LD 1. Storage & Protection 1.1. Storage The valves stay in the open position during the transportation. For incoming QC must check: a. Packing
Position locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to
RV* FH1 G G B FH Specifications Descriptions Cylinder bore size Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of
PC10 Piezoresistive Silicon Pressure Sensor
PC10 Piezoresistive Silicon Pressure Sensor Features With constant current and constant voltage excitation options Imported highly reliable pressure die Wide temperature compensation Normalized output
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II
3-PIECE BALL VALVE, 3600 PSI/ PN 248, WITH ISO DIRECT MOUNTING PAD 306M SERIES/ PED Category II 306M User Manual English Version Use for company in Europe who will place the product on the market, please
Switch Your Swivel! Hydraulic Live Swivels. Inline & 90 Swivels. 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax:
EXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure
The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and
Wheel operated Residual Pressure Valves
Wheel operated esidual Pressure Valves Offline Series CPV-10/O (For Oxygen,Inert,High purity and Medical gases) Series CPV-10/C (For Carbon dioxide and Carbon dioxide gas mixtures) Protects cylinder contents.
M A B MAB INFLATABLE GASKET SLIDE VALVES SERIES TSV FOR POWDERED AND GRANULAR SOLID MATERIALS
Automatic slide valves type TSV-150 with inflatable sealing system. The range of TSV slide valves supplied by MAB can always close against a head of flowing solids. The TSV series of inflatable gasket
Manual retractable fitting with safe-to-operate rotary drive
Manual Retractable Fittings SensoGate W M Manual retractable fitting with safe-to-operate rotary drive Revolutionary operation The SensoGate W M has a manual rotary drive, which enables the fitting to
FILTON SWIVEL JOINTS. technical manual
SWIVEL JOINTS technical manual FILTON SWIVEL JOINTS AN INTRODUCTION What are Swivel Joints? Swivel Joints are sealing devices which allow the leakproof transfer of fluid to and from slow and intermittent
Service Call: Procedure for Bleeding the Hydraulic Leveling System. Tools Required: S-Wrench 1/2, 9/16, 5/8, 11/16, & 3/4 Drain Pan
Service Call: Procedure for Bleeding the Hydraulic Leveling System Tools Required: S-Wrench 1/2, 9/16, 5/8, 11/16, & 3/4 Drain Pan Model(s): 5TC, 6TC, 5FC, HRM, HR-OM, HRX, TCX, RM, RMX, XM, & XML Tech-Tip
609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L)
1/8" Tube Thickness (3129L) 609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L) Per 3 76.2 3.47 88.1 40.28 36.0 914 1.30.59 100 ft. X 3129-0660 $26.01 4 101.6 4.47 113.5 40.28 48.0 1219 1.71.78
Sandvik Jaw Crushers
Sandvik Jaw Crushers Excellent durability thanks to welded frame. Range including models for mobile applications. 2 The product of decades of experience At Sandvik we have over a century of experience
Pressure Reducing Valve DMV 750
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Reducing Valve DMV 750 Advantages reduction
Operating Manual. R280 Pressure regulator made of brass. 1. Intended Use
Pressure regulator made of brass Operating Manual 1. Intended Use Line or outlet pressure regulators- /reducer for Air, gases and liquids which is designed to effect reduction to a downstream pressure
Operating instructions Safety Rope Emergency Stop Switches ZB0052 / ZB0053 ZB0072 / ZB0073
Operating instructions Safety Rope Emergency Stop Switches UK ZB0052 / ZB0053 ZB0072 / ZB0073 7390878 / 02 03 / 2011 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4
INTERPLANT STANDARD - STEEL INDUSTRY
INTERPLANT STANDARD - STEEL INDUSTRY IPSS STANDARD MAINTENANCE PRACTICE FOR PNEUMATIC OPERATED SHUT OFF VALVES No Corresponding IS Exists IPSS: 2-07-105-15 Formerly-: (New Standard) 0. Foreword 0.1. Interplant
M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions
BAC 13310 IM-P133-42 ST Issue 2 M45 ISO Ball Valve DN25 to 150 Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning 5.
Hoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
Diaphragm Vacuum Pumps and Compressors with Group C & D Explosion-Proof Motors Types: UN026, UN726, UN035, UN860
PROCESS Diaphragm Vacuum Pumps and Compressors with Group C & D Explosion-Proof Motors Types: UN026, UN726, UN035, UN860 Single & Twin-Head Designs OEM Installation Models UN860FTI EX UN726.3STI EX UN726.3FTI
Bray/ VAAS O-Ported Series Knife Gate Valve 770/780 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 770/780 Series Operations and Maintenance Manual Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 2 Commissioning
NEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
AT SERIES. Dart Valve Actuator. Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging Environments AT SERIES Dart Valve Actuator Durable, Accurate, Compact, Modular Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland
Telefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
Maintenance handbook
Maintenance handbook ontents HPU IDENTIFIATION SHEET... 4 1. MAINTENANE... 5 1.1 Filling level... 5 1.2 Fluid top-up... 5 1.3 Fluid replacing... 5 1.4 Fluid temperature control... 6 1.5 Functional control...
HNP. HNP073 Series. Flows up to 70 L/min Fluid viscosities to 700 cst PME HNP073
F L U I D C O N D I T I O N I N G P U R I F I E R S Flows up to 70 L/min Fluid viscosities to 700 cst PME HNP073 Introduction Extending service life Reliability of systems and the life of system components
REL-46 WARNING NOTICE 15 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD. Compatible with RELIABLE R15 and P Style dies. REL-46 Manual
OPERATORS ORS GUIDE REL-46 15 TON SINGLE ACTING REMOTE HYDRAULIC CRIMPING HEAD Compatible with RELIABLE R15 and P Style dies. RELIABLE EQUIPMENT & SERVICE CO., INC. 301 Ivyland Road Warminster, PA 18974
seal application limit
seal application limit table of content introduction seal-mart product portfolio superior manufacturing concept availability restrictions large diameter seals important guideline for application limit
MV-Series High-Pressure Valves USER GUIDE
MV-Series High-Pressure Valves USER GUIDE 369 Syringa Ridge Sandpoint, ID 83864 281.782.8312 www.vindum.com support@vindum.com V:1.0 (6-27-17) This page is intentionally blank. Copyright 2017 Vindum Engineering,
UCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)
SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER WCS75HDZ PRODUCT CODE No. 980482 INSTRUCTIONS FOR
REV0709. Parts List. Hydraulic Cylinder Model MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER. Max. Capacity: 55.2 Tons at 10,000 PSI
REV0709 Parts List Hydraulic Cylinder Model 10312 MODEL C SINGLE-ACTING, SPRING RETURN HYDRAULIC CYLINDER Max. Capacity: 55.2 Tons at 10,000 PSI REV0709 Item No. Part No. No. Req d Description 1 10606
MISCELLANEOUS OILFIELD TYPE "H" OIL SAVER RUBBERS SPIRAL LINE STRIPPERS JU STRIPPER RUBBERS RECORDER DIAPHRAGMS FOR MARTIN DECKER RECORDERS
TYPE "H" OIL SAVER RUBBERS SPIRAL LINE STRIPPERS JU STRIPPER RUBBERS RECORDER DIAPHRAGMS FOR MARTIN DECKER RECORDERS SIDEWINDER MUD MIXERS (REWORK) SIDEWINDER MUD MIXERS (COMPLETE) BRIDGE GATE GASKETS
Operating Instructions in compliance with Pressure Equipment Directive 2014/68/EU. FAS Brass Check Valve RDL
Operating Instructions in compliance with Pressure Equipment Directive 2014/68/EU FAS Brass Check Valve RDL Please read these operating instructions carefully to ensure a safe operation and keep the same
Desiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21
Desiccant Air Breathers DBE Section 3: SCHROEDER INDUSTRIES ACCESSORIES 21 Reservoir Accessories A hydraulic systems reservoir can play a significant role in the ingression of contamination into the system.
Hydraulic Live Swivels
Switch Your Swivel! Hydraulic Live Swivels Inline & 90 Swivels 304 & 440c Stainless Steel Heavy Duty Ball Bearing, Rebuildable Design Super Swivels was established in 1986. We manufacture heavy-duty, leak
Scubagaskets catalogue
Scubagaskets catalogue 111 O-ring Dimensions *New Products Product Codes METRIC SYSTEM Product Codes METRIC SYSTEM I.D. C/S O.D. I.D. C/S O.D. 001 0,74 1,02 2,78 211 20,22 3,53 27,28 1,95 X 1.00* 1,95
Pressure Transmitters 36 F-27839
Pressure Transmitters 36 F-27839 SPD310/SPD360 Air Differential schneider-electric.com 37 SPD310/SPD360 SPD310/SPD360 differential pressure transmitters are intended for use in air handling systems for
INTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
Low Friction Cylinders
CAT.ES-15 C Low Friction Cylinders Metal Seal Type ø30, ø0 newly added Compact Low Friction Cylinder Series MQQ Bore size Operating pressure range Actuation speed (MPa) (mm/s) Series MQQT Standard type
Vickers. Filters. Reservoir Vent Filters. Spin-on Air Filters & Adaptors. Rev. 3/98
Vickers Filters Reservoir Vent Filters Spin-on Air Filters & Adaptors Rev. 3/98 73 Introduction Prevent Airborne Ingression A key element of contamination control is reservoir vent filtration. Reservoir
Smooth Vent Valve XVD. Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
P+P Product Code 90015/20
v2 12/08 P+P ANTHRON SELF RESCUE SYSTEM USER INSTRUCTIONS P+P Product Code 90015/20 This manual does not constitute suitable and sufficient training in the use of this rescue equipment. Contact P+P for
2/2-way proportional valve
2/2-way proportional valve High sensitivity Type can be combined with 0... 16 bar DN 0.8... 4 mm 1/8, 1/4 or sub-base EEx approvals optional Type 8605 Digital control electronics Cable plug version Type
Groove Dimensions For Standard Wear Ring Widths
NYLON WER RING TEHNIL INFORMTION T E T X D X W W - YLINDER ORE - ROD DIMETER - MINIMUM ORE MINUS.253/.256 D - MXIMUM ROD DIMETER PLUS.253/.256 E - GROOVE WIDTH T - THIKNESS OF WER RING W - WIDTH OF WER
Spilt body Flange ball valve. TC-205MFF-PN1640 User Manual English Version. Document No: TC-205MFF-PN1640.Ur-manual. Date: 2007/04/2617. Version: 1.
Spilt body Flange ball valve TC-205MFF-PN1640 Series PED Category I,II TC-205MFF-PN1640 User Manual English Version Use for company in Europe who will place the product on the market, please amend which
PRESSURE DIFFERENTIAL PRODUCTS 2008 TRICO CORPORATION. ALL RIGHTS RESERVED.
PRESSURE DIFFERENTIAL PRODUCTS 2008 TRICO CORPORATION. ALL RIGHTS RESERVED. TYPES OF VENTS Expansion chambers Some equipment by design needs to breath Majority of equipment will come with some type of
Scubagaskets catalogue
Scubagaskets catalogue O-ring Dimensions *New Products Product Codes 001 1,95 X 1.00* 002 003 004 2,20 X 1,00* RO* 005 I.D.mm 0,74mm 1,95mm 1,07mm 1,42mm 2,20mm 2,40mm 2,57mm METRIC SYSTEM C/Smm O.D.mm
Leak testing of Valves. Standards for acceptable Rates of Valve Leakage
Leak testing of Valves Standards for acceptable Rates of Valve Leakage American Petroleum Institute (API) The API standard 598: Valve Inspection and Testing, covers the testing and inspection requirements
Grundfos GT TANK Keep it safe
GRUNDFOS GT TANK Grundfos GT TANK Keep it safe Long-life tanks for all needs Grundfos pressure tanks are all ideally suited and approved for use with drinking water. The material used ensures that there
for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity)
for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity This is a Pilot operated pressure reducing valve. It is suitable to install in the steam lines with the
Inline & 90 Swivels. Hydraulic Live Swivels. Heavy Duty Ball Bearing, Rebuildable Design
Hydraulic Live Swivels Available In BSPP Inline & 90 Swivels Heavy Duty Ball Bearing, Rebuildable Design www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 M1606.1711 Thousands
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HOSE/UMBILICAL CUTTER HCV100 PRODUCT CODE No. 980292 INSTRUCTIONS
Smooth Vent Valve. XVD Series
Smooth Vent Valve Series Valve / needle valve integrated construction requires only 1/4 the piping space of previous models. Particulates significantly reduced through the use of a metal diaphragm in the
E 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d
R e t u r n - S u c t i o n F i l t e rs E 158 E 198 E 248 Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min 20.90-5e 0.0-2d D e s c r i p t i o n Application For operation in
Gas Pressure Regulator HON 300
Gas Pressure Regulator HON 300 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 300.20 EDITION 01/2017 1. General The "General description 300.00" for the gas pressure