FT Sea Duck. Designed By: Josh Bixler Drawing By: Dan Sponholz SPECIFICATIONS SHEET & TILE KEY RECOMMENDED SETTINGS
|
|
|
- Melvyn Fletcher
- 5 years ago
- Views:
Transcription
1 FT Sea Duck Designed By: Josh Bixler Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 42 in 067 mm CENTER OF GRAVITY CG 2.5 in 64 mm WG SPAN 56 in 397 mm WG CHORD 9 in 229 mm WG AREA in dm 2 DRY WEIGHT 39.2 oz g ALL UP WEIGHT AUW 45.9 oz 30 g WG LOADG WL 3.4 oz/ft g/dm 2 WG CUBIC LOADG WCL 7.2 SHEET & TILE KEY RECOMMENDED SETTGS THROW EXPO AILERON 6 30% ELEVATOR 6 30% RUDDER 6 30% NOTE: DUPLICATE PARTS ARE ON SHEETS 6-7 AND TILES Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
2 DRAWG KEY FOLD TYPES A B C A - FOLD (ABOVE) B - FOLD (BESIDE) C - FOLD (COVER) LE TYPE/COLOR SYMBOLS PART NUMBER CUT 50% SCORE CREASE NAME MATERIAL MODEL - VERSION QUANTITY L R 45 DOUBLE BEVEL 45 SGLE BEVEL EDGE BEVEL MIRRORED PART CAVITY REMOVE PAPER REFERENCE/ OPTIONAL CENTER OF GRAVITY (CG) 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
3 FT Sea Duck SHEET OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz FUSELAGE SHEETG - TOP 02 FUSELAGE CAB FUSELAGE SHEETG - FRONT 09 BATTERY TRAY 08 HATCH SUPPORT 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
4 FT Sea Duck SHEET 2 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz G2 SQUARE POWER POD 0 FUSELAGE G TOP ANGLE GAUGE 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
5 FT Sea Duck SHEET 3 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz 45 SGLE BEVEL ENGE COWLG VERTICAL STABILIZER - RIGHT 45 DOUBLE BEVEL 23 2 PONTOON PYLON 24 2 PONTOON PONTOON SHEETG 6 HORIZONTAL STABILIZER 45 SGLE BEVEL PONTOON SPACER 25 4 WG SPAR - B Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
6 FT Sea Duck SHEET 4 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz 45 SGLE BEVEL 45 DOUBLE BEVEL 2 WG SPAR - A 20 WG - LEFT 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
7 FT Sea Duck SHEET 5 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz 0 TAIL BOOM - RIGHT 3 2 PUSH ROD GUIDE 2 2 TAIL BOOM - BOTTOM FUSELAGE DOUBLER - LOWER FUSELAGE SHEETG - STEP 07 FUSELAGE HATCH - REAR BULKHEAD 45 SGLE BEVEL 8 VERTICAL STABILIZER - LEFT 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
8 FT Sea Duck SHEET 6 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz 2 2 TAIL BOOM - BOTTOM TAIL BOOM - LEFT PUSH ROD GUIDE ENGE COWLG 4 2 WG SPAR - B PONTOON PONTOON PYLON DOUBLE BEVEL 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
9 FT Sea Duck SHEET 7 OF 7 Designed By: Josh Bixler Drawing By: Dan Sponholz 45 SGLE BEVEL 45 DOUBLE BEVEL XX 2 PONTOON SK 9 WG - RIGHT PONTOON SPACER PONTOON SPACER 5 2 POWER POD 25 4 PONTOON SPACER 206 Flite Test, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use.
10 FT SEA DUCK v..0 TILE 03 FUSELAGE SHEETG - TOP
11 FT SEA DUCK v..0 TILE 2
12 FT SEA DUCK v..0 TILE 3 02 FUSELAGE CAB
13 FT SEA DUCK v..0 TILE 4
14 04 FUSELAGE SHEETG - FRONT FT SEA DUCK v..0 TILE 5
15 FT SEA DUCK v..0 TILE 6
16 09 BATTERY TRAY FT SEA DUCK v..0 TILE 7
17 08 HATCH SUPPORT FT SEA DUCK v..0 TILE 8
18 FT SEA DUCK v..0 TILE 9
19 FT SEA DUCK v..0 TILE 0
20 FT SEA DUCK v..0 TILE
21 FT SEA DUCK v..0 TILE 2 G2 SQUARE 90
22 5 2 POWER POD FT SEA DUCK v..0 TILE 3
23 FT SEA DUCK v..0 TILE 4
24 0 FUSELAGE FT SEA DUCK v..0 TILE 5
25 G TOP ANGLE GAUGE FT SEA DUCK v..0 TILE 6
26 FT SEA DUCK v..0 TILE ENGE COWLG
27 FT SEA DUCK v..0 TILE 8 45 SGLE BEVEL 7 VERTICAL STABILIZER - RIGHT
28 FT SEA DUCK v..0 TILE PONTOON PYLON 45 DOUBLE BEVEL
29 FT SEA DUCK v..0 TILE PONTOON
30 26 2 PONTOON SHEETG FT SEA DUCK v..0 TILE 2
31 6 HORIZONTAL STABILIZER 45 SGLE BEVEL FT SEA DUCK v..0 TILE 22
32 25 4 PONTOON SPACER FT SEA DUCK v..0 TILE 23
33 22 WG SPAR - B FT SEA DUCK v..0 TILE 24
34 FT SEA DUCK v..0 TILE 25
35 FT SEA DUCK v..0 TILE SGLE BEVEL
36 FT SEA DUCK v..0 TILE DOUBLE BEVEL
37 FT SEA DUCK v..0 TILE 28
38 FT SEA DUCK v..0 TILE 29
39 2 WG SPAR - A FT SEA DUCK v..0 TILE 30
40 20 WG - LEFT FT SEA DUCK v..0 TILE 3
41 FT SEA DUCK v..0 TILE 32
42 FT SEA DUCK v..0 TILE 33 0 TAIL BOOM - RIGHT 2 2 TAIL BOOM - BOTTOM
43 FT SEA DUCK v..0 TILE 34
44 FT SEA DUCK v..0 TILE 35
45 FT SEA DUCK v..0 TILE PUSH ROD GUIDE
46 05 FUSELAGE DOUBLER - LOWER FT SEA DUCK v..0 TILE 37
47 06 FUSELAGE SHEETG - STEP FT SEA DUCK v..0 TILE 38
48 07 FUSELAGE HATCH - REAR BULKHEAD FT SEA DUCK v..0 TILE 39
49 45 SGLE BEVEL 8 VERTICAL STABILIZER - LEFT FT SEA DUCK v..0 TILE 40
50 FT SEA DUCK v..0 TILE TAIL BOOM - BOTTOM TAIL BOOM - LEFT
51 FT SEA DUCK v..0 TILE 42
52 FT SEA DUCK v..0 TILE 43
53 FT SEA DUCK v..0 TILE 44
54 3 2 PUSH ROD GUIDE 4 2 ENGE COWLG FT SEA DUCK v..0 TILE 45
55 22 WG SPAR - B FT SEA DUCK v..0 TILE 46
56 24 2 PONTOON FT SEA DUCK v..0 TILE 47
57 23 2 PONTOON PYLON 45 DOUBLE BEVEL FT SEA DUCK v..0 TILE 48
58 FT SEA DUCK v..0 TILE 49
59 FT SEA DUCK v..0 TILE DOUBLE BEVEL
60 FT SEA DUCK v..0 TILE 5 45 SGLE BEVEL
61 FT SEA DUCK v..0 TILE 52
62 XX 2 PONTOON SK FT SEA DUCK v..0 TILE 53
63 9 WG - RIGHT FT SEA DUCK v..0 TILE 54
64 25 4 PONTOON SPACER FT SEA DUCK v..0 TILE 55
65 5 2 POWER POD 25 4 PONTOON SPACER 25 4 PONTOON SPACER FT SEA DUCK v..0 TILE 56
FT Sea Duck. Designed By: Josh Bixler Drawing By: Dan Sponholz SPECIFICATIONS SHEET & TILE KEY RECOMMENDED SETTINGS
FT Sea Duck www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 42 in 1067 mm CENTER OF GRAVITY CG 2.5 in 64 mm WG SPAN 56 in 1397 mm WG
Akcent-2 - Building Instructions
Akcent-2 Home Pictures Building Instructions Ordering Akcent-2 - Building Instructions Note! The pictures show older kits with "diser" wings. The new kits come with nicer D-box wings. Servo locations are
aero naut Electric Model Aeroplane Quido Order-No. 1303/00
aero naut Electric Model Aeroplane Quido Order-No. 1303/00 Quido is a small model that accompanies you wherever you go. The prefabricated parts are mostly balsa and just need to be assembled according
Designed by Steve Shumate Adapted from the North Star design by Laddie Mikulasko. Polaris EX Introduction
1 Model Aero Polaris Designed by Steve Shumate Adapted from the North Star design by Laddie Mikulasko Polaris EX Introduction We re excited to introduce the Polaris EX seaplane parkflyer! Based on the
AVA Building Instructions
Suggested Assembly Sequence: AVA Building Instructions 1. Insert fittings in rudder and trial fit rudder on boom 2. Attach stab to v-mount and position ahead of rudder ¼, sanding the v-mount as needed.
Horizontal Fuselage. Top Vertical Fuselage 1. Lay out the Top Vertical Fuse Front(1), Top Vertical Fuse Back(2), and Vertical Stabilizer(3).
Rumbuilder 71 B-17 Congrats on your Rumbuilder B-17! We re glad you chose to fly with us! If you have any problems, or missing/broken kit pieces, please contact us. We d be happy to replace any damaged
BlueArrow. Venus DLG. Construction and Flight Manual. Note: Read this manual carefully before construction and flight!
BlueArrow Venus DLG Construction and Flight Manual Note: Read this manual carefully before construction and flight! 1 1. Introduction Thank you for choosing this fantastic Venus DLG brought to you by BlueArrow
BASIC AIRCRAFT STRUCTURES
Slide 1 BASIC AIRCRAFT STRUCTURES The basic aircraft structure serves multiple purposes. Such as aircraft aerodynamics; which indicates how smooth the aircraft flies thru the air (The Skelton of the aircraft
Dornier Do R 4 Super-Wal
Dornier Do R 4 Super-Wal Model Aviation Laddie Mikulasko s Dornier Do R 4 Super-Wal Build the multiengine, record-setting seaplane. Article, plans, instructions, and photos by Laddie Mikulasko. Complete
Model Aero Sportster Indroduction
1 Model Aero Sportster Indroduction We are excited to introduce the Model Aero Sportster! Inspired by classic designs of the past, the Sportster is a relaxing slow flyer, equally at home indoors or outside
Aegea Assembly Notes:
Aegea Assembly Notes: The Aegea model is a thermal Duration (TD) model made up of components from Phil Barnes 1 (bagged wing and tail group) and Terry Luckenback 2 (Pretty Mantis fuse). Due to its construction
We hope you ll enjoy the Drifter as much as we have! Scott DeTray Model Aero Specifications:
We are excited to bring you the Drifter RC airboat. You re probably thinking it doesn t fly so what is Model Aero thinking??? We have always liked RC vehicles of all types and have had a fondness for airboats
MiG-29 Scale EDF Radio Control model airplane
MiG-9 Scale EDF Radio Control model airplane Wingspan : 45mm Model No : FF-D004 UNDER SFETY PRECUTIONS This radio control is not a toy! - lways keep this instruction manual ready on hand for quick reference.
Instructions for Fun Foam Critter 4/25/2007 BP Hobbies LLC 140 Ethel Road W Suite J Piscataway NJ,
Instructions for Fun Foam Critter 4/25/2007 BP Hobbies LLC 140 Ethel Road W Suite J Piscataway NJ, 08854 http://www.bphobbies.com Specifications: Wing Span: 20" Length: 20" Flying Weight: 5.5-7.0 oz Controls:
Miss Mayflower. Build Manual
Miss Mayflower Build Manual Thank you for the purchase of the Miss Mayflower, this new exciting craft will give you fun on many types of terrain including snow, gravel, pavement, grass, water, and when
MICRO - DLG. This kit should only take 30 minutes to compile, very simple and quick.
MICRO - DLG This kit should only take 30 minutes to compile, very simple and quick. You will need: Hot Glue ( small tip preferably ) Sharp razor blade Ruler a strip of strong fiber tape Thin nose Pliers
Model Aero AT-6 Texan Introduction
1 Model Aero AT-6 Texan Introduction We are excited to introduce the Model Aero AT-6 Texan! Originally used as an advanced trainer by the U.S. Armed Forces, the AT-6 is a relaxing slow flyer, equally at
Blaster 2 & 2e Assembly Guide
Blaster 2 & 2e Assembly Guide from 123 Radford Road Leamington Spa Warwickshire UK CV31 1LG www. sales@ 2009 HyperFlight Revision 5, 1/05/09 R5.odt Warning, this is not a toy! If you are new to the hobby
robart HOW-TO Series Model Incidence Meter
robart HOW-TO Series Model Incidence Meter The term incidence is something of a misnomer since this highly versatile tool is capable of measuring or comparing angles other than incidence of a wing or tail.
Last Revised 3/17/15 RMRC Mako
Ready Made RC, LLC Assembly Instructions for: Last Revised 3/17/15 RMRC Mako Page 1 Thank you for purchasing the RMRC Mako! It is important to read the manual in its entirety before your maiden flight.
Southern Eagles Soaring
Southern Eagles Soaring N56LS Standard Cirrus Disassembly / Assembly Procedure. Version 2, 2017 You landed out so what now? First, hopefully you made arrangements with someone who has a hitch on their
STOL CH rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3.
STOL CH 750 3 rd Edition Drawings, dated April 16, 2012 Summary of changes from Edition 2 Revision 1 to Edition 3. Page Date Drawing Title 75-G-0 04/12 Three View Drawing 1. Edition 3 75-G-1 04/12 Drawings
Slipso400 August 17, 2006
Slipso400 August 17, 2006 Contents 1 Introduction 3 2 Preparation 4 3 Wing 5 3.1 Preface.............................................. 5 3.2 Building.............................................. 5 3.2.1
WHAT IS GLIDER? A light engineless aircraft designed to glide after being towed aloft or launched from a catapult.
GLIDER BASICS WHAT IS GLIDER? A light engineless aircraft designed to glide after being towed aloft or launched from a catapult. 2 PARTS OF GLIDER A glider can be divided into three main parts: a)fuselage
IVAN S LAKEMASTER BY IVAN PETTIGREW CONSTRUCTION NOTES
IVAN S LAKEMASTER BY IVAN PETTIGREW CONSTRUCTION NOTES August 2015 The LakeMaster started out to be a scaled down version of Ivan s Seagull which has been a fantastic model for over 20 years. The Seagull
1 of 6 16/8/18, 6:07 pm
Trevor Boundy FW: 25 PT-19 - Redesign and Fabrication of Fuselage Stab Mount 1 message Tandy Walker To: Trevor Boundy Wed, Aug 15, 2018
Aircraft Stability and Control Prof. A. K. Ghosh Department of Aerospace Engineering Indian Institute of Technology-Kanpur. Lecture- 25 Revision
Aircraft Stability and Control Prof. A. K. Ghosh Department of Aerospace Engineering Indian Institute of Technology-Kanpur Lecture- 25 Revision Yes, dear friends, this is the mann ki baat session for lateral
1/10 th Scale 1956 Ted Jones Classic Hydroplane
1/10 th Scale 1956 Ted Jones Classic Hydroplane Preparation These plans show outside sheeting of 3/32 balsa laminated with 1/64 birch ply. This makes a light and strong skin for this boat. Optionally you
AIRCRAFT PRIMARY CONTROLS A I R C R A F T G E N E R A L K N O W L E D G E
1.02.02 AIRCRAFT PRIMARY CONTROLS 1. 0 2 A I R C R A F T G E N E R A L K N O W L E D G E CONTROLLING AIRCRAFT AIRCRAFT CONTROL SYSTEM In general, we use control inputs of the following devices in cabin:
Aerodynamics Principles
Aerodynamics Principles Stage 1 Ground Lesson 3 Chapter 3 / Pages 2-18 3:00 Hrs Harold E. Calderon AGI, CFI, CFII, and MEI Lesson Objectives Become familiar with the four forces of flight, aerodynamic
II.E. Airplane Flight Controls
References: FAA-H-8083-3; FAA-8083-3-25 Objectives Key Elements Elements Schedule Equipment IP s Actions SP s Actions Completion Standards The student should develop knowledge of the elements related to
Aerobatic Trimming Chart
Aerobatic Trimming Chart From RCU - Chip Hyde addresses his view of Engine/Motor thrust. I run almost no right thrust in my planes and use the thottle to rudd mix at 2% left rudd. to throttle at idle.
Chapter 3: Aircraft Construction
Chapter 3: Aircraft Construction p. 1-3 1. Aircraft Design, Certification, and Airworthiness 1.1. Replace the letters A, B, C, and D by the appropriate name of aircraft component A: B: C: D: E: A = Empennage,
Stability and Flight Controls
Stability and Flight Controls Three Axes of Flight Longitudinal (green) Nose to tail Lateral (blue) Wing tip to Wing tip Vertical (red) Top to bottom Arm Moment Force Controls The Flight Controls Pitch
Introduction. Have Fun Pat Morgan patsplanes.com. The cool paper airplane site!
Folded Designs Introduction Since at least 1909 paper planes have been folded and flown and become addictive to the true fan. I have been folding paper airplanes for over 45 years and designing them for
CIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 55-40: RUDDER GENERAL. Rudder 55-40: RUDDER. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Rudder CHAPTER 55-40: RUDDER GENERAL 55-40: RUDDER 1. General The rudder provides airplane directional (yaw) control and includes a rudder trim tab used for yaw trim
Table of Contents. Career Overview... 4
Table of Contents Career Overview.................................................. 4 Basic Lesson Plans Hot-Air Balloons Activity 1 Your First Hot-Air Balloon.... 5 Activity 2 Surface Area and Volume...
REPLACING THE AFT RUDDER CABLES
REPLACING THE AFT RUDDER CABLES Note: You must have the assistance of a qualified Aircraft Mechanic to perform this procedure. A logbook entry with the mechanics signature is required. Please read these
Brief Maintenance Manual DAR-Solo
Brief Maintenance Manual DAR-Solo Sofia 2009 Page: 1 TABLE OF CONTENTS Introduction 3 Limitations and safety information 4 General view of DAR-Solo prototype 7 Technical Data 8 Inspection before and after
Principles of glider flight
Principles of glider flight [ Lecture 2: Control and stability ] Richard Lancaster Email: Richard@RJPLancaster.net Twitter: @RJPLancaster ASK-21 illustrations Copyright 1983 Alexander Schleicher GmbH &
SEAGULL SPORT FLYING BOAT BY IVAN PETTIGREW CONSTRUCTION NOTES
SEAGULL SPORT FLYING BOAT BY IVAN PETTIGREW CONSTRUCTION NOTES The Seagull came into being in 1994. Often when camping at a peaceful lake I thought it would be nice to have a quiet electric glider in order
CIRRUS AIRPLANE MAINTENANCE MANUAL
RUDDER 1. GENERAL The rudder provides airplane directional (yaw) control and includes a rudder trim tab used for yaw trim adjustment. The rudder is of conventional design with skin, spar and ribs manufactured
Foam Plate Glider: Sonic Silhouette
Designed by: Ritchie Kinmont Project #40 Page 1/25 Foam Plate Glider: Sonic Silhouette About this project: The Foam Plate Glider Sonic Silhouette is the first in a series of flying glider projects made
14. Ai le ron quick-connect system
14. Ai le ron quick-connect system When attaching the wings to the fuselage the aileron control system is automatically coupled via angled bellcranks, two of which are mounted in the fuselage and one in
Related Careers: Aircraft Instrument Repairer Aircraft Designer Aircraft Engineer Aircraft Electronics Specialist Aircraft Mechanic Pilot US Military
Airplane Design and Flight Fascination with Flight Objective: 1. You will be able to define the basic terms related to airplane flight. 2. You will test fly your airplane and make adjustments to improve
CONSTRUCTION NOTES BY: MARK HUNT ISSUED:
INSIGHT V4 CONSTRUCTION NOTES BY: MARK HUNT ISSUED: 3/22/06 Pg.1 INDEX Title Page 1 Index 2 Introduction 3 Material list 4 Foam Cutting Notes 5 Wing 5 Stab 8 Vertical Fin 8 Fuselage Foam Parts 9 Fuselage
Build This World Record Fuselage Model
Build This World Record Fuselage Model Here You Have Complete Instructions and Plans to Build a Plane of Sure-fire Performance that Established a World Record at the 1932 National Airplane Model Competition
Bench Trimming A Stunt Ship
Bench Trimming A Stunt Ship by Brett Buck "Bench Trimming" - this refers to setting up the initial trim of the airplane in the shop prior to flight. Since people have been flying stunt in its current form
ELF. The Vladimir s HYPERFLIGHT. Jewel Like and very cool - small in stature yet huge in performance - Elf and safety in one glorious package!
19/7/11 09:04 Page 2 BENCHMARKS - By Steve Dorling HYPERFLIGHT Jewel Like and very cool - small in stature yet huge in performance - Elf and safety in one glorious package! The Vladimir s Models Elf from
Aircraft - Very Heavy Lift at Very Low Cost
Aircraft - Very Heavy Lift at Very Low Cost Stephen Funck This is a span loader for standard shipping containers. The design goal is the lowest cost per ton / mile. Low wing loading allows for low flight
Preliminary Design Review (PDR) Aerodynamics #2 AAE-451 Aircraft Design
Preliminary Design Review (PDR) Aerodynamics #2 AAE-451 Aircraft Design Aircraft Geometry (highlight any significant revisions since Aerodynamics PDR #1) Airfoil section for wing, vertical and horizontal
Annex E(M) - Final inspection checklist - monowheel
Annex E(M) - Final inspection checklist - monowheel A/C Reg... Owner...Kit S/N...Date... (U.K. Only) L.A.A No...Inspector...Insp. No... Note: This check list only covers specific items for inspection of
The Metric Glider. By Steven A. Bachmeyer. Aerospace Technology Education Series
The Metric Glider By Steven A. Bachmeyer Aerospace Technology Education Series 10002 Photographs and Illustrations The author wishes to acknowledge the following individuals and organizations for the photographs
DISCLAIMER: This scanned version of the Schweizer 2-33A Sailplane manual is provided without warranty of completeness or accuracy.
DISCLAIMER: This scanned version of the Schweizer 2-33A Sailplane manual is provided without warranty of completeness or accuracy. It is solely as a service to builders of scale model aircraft who are
Ottawa Remote Control Club Wings Program
+ Ottawa Remote Control Club Wings Program Guide line By Shahram Ghorashi Chief Flying Instructor Table of Contents Rule and regulation Quiz 3 Purpose of the program 4 Theory of flight Thrust 4 Drag 4
Hawk Talk ALL CLUB MEMBERS ARE ENCOURAGED TO ATTEND BOARD MEETINGS. President s Message!
Hawk Talk THE VOICE OF THE OMAHAWKS R/C INC Vol 67, # 03 Corporate Office- 1 5 4 4 2 S e w a r d S t, O m a h a, N E 6 8 1 5 4-4 1 1 6 President Rick Sessions Editor/Publisher Secretary Greg Nelson Vice
FUN-FLY MISSION; DART-LIKE STABILITY
FUN-FLY MISSION; DART-LIKE STABILITY by BLAINE STETLER Kenny Martin, 11, pilots his Notforsale. (Photo by Jeff Tibbetts.) Below: left to right: Kenny Martin (kneeling), 11, of Summerfield, FL; Scott Roddenberry,
First Flight Glossary
First Flight Glossary (for secondary grades) aeronautics The study of flight and the science of building and operating an aircraft. aircraft A machine used for flying. Airplanes, helicopters, blimps and
EXAMPLE MICROLIGHT AIRCRAFT LOADING CALCULATIONS
1. Introduction This example loads report is intended to be read in conjunction with BCAR Section S and CS-VLA both of which can be downloaded from the LAA webpage, and the excellent book Light Aircraft
1939 STOUT TROPHY WINNER
1939 STOUT TROPHY WINNER This model's 36-minute flight won the Stout Trophy and qualified the builder as captain of the American Moffett team. Bob Toft. Has won a second in gas, first in rubber at Nationals.
Steps for W17, W14,W07, Wing Assembly Sonex #815
CAUTION: This document is in no way a publication of Sonex Aircraft LLC. or any other corporation. All products mentioned are not necessarily recommended for use, but are included for informational purposes
Homework Exercise to prepare for Class #2.
Homework Exercise to prepare for Class #2. Answer these on notebook paper then correct or improve your answers (using another color) by referring to the answer sheet. 1. Identify the major components depicted
English Translation/Interpretation for Class F3B-RES thermal-gliders (Rudder, Elevator, spoilers)
English Translation/Interpretation for Class F3B-RES thermal-gliders (Rudder, Elevator, spoilers) Contents: 1. General Provisions: 1 2. Model 2 3. Contest Field Layout 2 4. Competition flights 3 5. Reflights
SHEET 2: VERTICAL INSTALLATION
IMAGE OW1291 OW1293 OW1295 OW1297 AVATAR OW1301 OW1303 OW1305 OW1307 OW1311 OW1313 OW1315 OW1317 OW1331 OW1333 OW1335 OW1337 SHEET 2: VERTICAL INSTALLATION SHEET 3: HORIZONTAL INSTALLATION Drawing: 760883XX
NEW DESIGNS. Print in Landscape Mode with ¼ inch borders. Hinges (2) degrees. 1 Seating Type Optional
2017 IDEAS NEW DESIGNS Ken Simpson Designs Drawn 06-01-2017 Rev. 07-02-2017 The SPORTSMAN 10'L x 36 W x 15 H 475 pound Capacity Print in Landscape Mode with ¼ inch borders. Hinges (2) 36 30 8 degrees Click
GEOL 106: Earthquake Country Activity 08: Discharge Measurements. Name: Date:
Name: Date: Discharge Calculation Discharge = Velocity X Area or Q = VA Calculate the Discharge for the measurements shown at the right. Q = Discharge Measurement Do not collect water samples in the area
VIII.A. Straight and Level Flight
VIII.A. Straight and Level Flight References: FAA-H-8083-3; FAA-H-8083-25 Objectives Key Elements Elements Schedule Equipment IP s Actions SP s Actions Completion Standards The student should develop the
BUILDING INSTRUCTION Glider TASER unplugged. Taser unplugged Building instruction September
Wingspan [mm]: 2000 Takeoff weight [g]: From 400 Airfoil: AG 455ct-02f AG47ct-02f by Mark Drela BUILDING INSTRUCTION Glider TASER unplugged www.pcm.at 1 CONTENTS DATA 1. Kit contents 2. What else do you
Chapter 5 Wing design - selection of wing parameters - 4 Lecture 22 Topics
Chapter 5 Wing design - selection of wing parameters - Lecture Topics 5.3.9 Ailerons 5.3.0 Other aspects of wing design Example 5. 5.3.9 Ailerons The main purpose of the ailerons is to create rolling moment
A6M3 Zero CONSTRUCTION. WW II Japanese Aerial Samurai. THE WING The wing is a basic foam-core affair, sheeted with balsa. Retracts are an option, but
CONSTRUCTION By Mark Rittinger A6M3 Zero WW II Japanese Aerial Samurai T The Imperial Japanese Navy s Type 0 fighter is probably the most recognized Japanese aircraft of World War II. Coming as a bit of
Advisory Circular AC 120-CPCP DEVELOPMENT AND IMPLEMENTATION OF CORROSION PREVENTION AND CONTROL PROGRAM (CPCP)
LAMPIRAN KEPUTUSAN DIREKTUR JENDERAL PERHUBUNGAN UDARA NOMOR : SKEP/85/IV/2008 TANGGAL : 21 April 2008 Advisory Circular AC 120-CPCP DEVELOPMENT AND IMPLEMENTATION OF CORROSION PREVENTION AND CONTROL PROGRAM
BUIDLING INSTRUCTION GLIDER MINI-RACE. MINI-Race building instruction January
Wingspan [mm]: 950 Aspect ratio: 7,7 Wing area [dm2]: 11,7 Wing loading [g/dm²] : 16 Takeoff weight [g]: 190 Airfoil: AG03 mod BUIDLING INSTRUCTION GLIDER MINI-RACE www.pcm.at 1 CONTENTS DATA 1. Kit contents
!""#$%!!!!!!!!!!!!!!! "#$%!&'()*!$%!*(%+!,-!.-'/!()/!.'$*%!%,0($1#,!()/!%2--,#3!!4//!(!%2(''!(2-5),!-.!5&! *'*6(,-0!.-0!'-)1!'*6*'!.'$1#,%3!!!!!!!!
""#$% "#$%&'()*$%*(%+,-.-'/()/.'$*%%,0($1#,()/%2--,#34//(%2(''(2-5),-.5& *'*6(,-0.-0'-)1'*6*'.'$1#,%3 70$*),,#*,*2&'(,*8$,#,#*9:;
Preliminary Analysis of Drag Reduction for The Boeing
Preliminary Analysis of Drag Reduction for The Boeing 747-400 By: Chuck Dixon, Chief Scientist, Vortex Control Technologies LLC 07. 31. 2012 Potential for Airflow Separation That Can Be Reduced By Vortex
HOW AND WHY DO GLIDERS FLY - WHAT SHAPE SHOULD THEY BE?
HOW AND WHY DO GLIDERS FLY - WHAT SHAPE SHOULD THEY BE? What is flight? We all understand that air is a fluid, not dissimilar to, if lighter than, water, and we can all appreciate that an immerse body
Winnipeg Headingley Aero Modellers. Things About Airplanes.
Winnipeg Headingley Aero Modellers Things About Airplanes. Table of Contents Introduction...2 The Airplane...2 How the Airplane is Controlled...3 How the Airplane Flies...6 Lift...6 Weight...8 Thrust...9
STOL CH V10-4SP Jury Strut Angle. Position the jury strut angle at rib station #2 (drawing 7-V-10) drill and Cleco.
7V10-4SP Jury Strut Angle Position the jury strut angle at rib station #2 (drawing 7-V-10) drill and Cleco. SECTION 4C - Page 1 of 11 SECTION 4C - Page 2 of 11 Turn the wing over. 7V7-1 Nose Skin TIP:
My Background. Joe Wurts 1
My Background Flying RC sailplanes since 1976 First competition 1977 US Nationals, placed 2 nd Only pilot to win world champion for both FAI recognized soaring disciplines FAI world record holder for declared
Big News! Dick Kline Inventor of the KF AirFoil Contacts rcfoamfighters.
Big News! Dick Kline Inventor of the KF AirFoil Contacts rcfoamfighters. (Copy of Email from Dick Kline to rcfoamfighters on 3/28/09) --------------------------------------------------------------------------------
SECTION 23iS/U: SIDE SKINS
SECTION 23iS/U: SIDE SKINS F-1203G-R BULKHEAD SIDE CHANNEL F-01248-R-1 ARM REST F-01205D SEAT BACK ADJUSTMENT GUIDE, 4 PLACES F-01205B-1 ROLL BAR ATTACH PLATE, F-01248B-1 FUSELAGE PIN LATCH, F-01204J BULKHEAD
1 General. 1.1 Introduction
1 General 1.1 Introduction The contents of this book will focus on the anatomy of the aeroplane and the various systems that enable it to operate both on the ground and in the air. Flight controls Landing
AIRCRAFT STRUCTURAL DESIGN & ANALYSIS K. RAMAJEYATHILAGAM
AIRCRAFT STRUCTURAL DESIGN & ANALYSIS K. RAMAJEYATHILAGAM To invent an airplane is nothing To build one is something But to fly is everything Lilienthal DAY 1 WHAT IS AN AIRCRAFT? An aircraft is a vehicle,
Rockets. Student Journal. After School STEM Academy
Rockets Student Journal After School STEM Academy 1 2 Activity 1 ACTIVITY 1: SODA STRAW ROCKET ACTIVITY 1. 2. Cut out one big rectangle, otherwise known as your rocket body. Curl the rectangle lengthwise
F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN F-1281-R LOWER RIGHT SKIN F-1208-R FUSELAGE FRAME
F-1282-R BOTTOM RIGHT SKIN F-1283C J-STIFFENER F-1278 TOP SKIN F-00009-L ADAHRS BRACKET F-00009-R ADAHRS BRACKET F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN SECTION 10: TAILCONE F-1279-L UPPER LEFT
August HAPPY BIRTHDAYS Joesph Litosky - September 1 Robert Guienot - September 11 Edward Mickle - September 27
AUGUST CLUB MEETING The next Wright Flyers club meeting will be on Saturday, August 25 at 12:00 Noon at the WF Field. MINUTES OF JULY MEETING There are no minutes; the meeting was cancelled. HAPPY BIRTHDAYS
Parkzone Vapor Repair tutorials
Propeller replacement The propeller is held on by the threaded shaft. You will need to grip the shaft/cog with your fingers or some pliers and rotate the propeller anticlockwise when viewed from the front.
{sweet. handling. Creating designs that give your airplane great flying qualities NEAL WILLFORD 50 APRIL 2006
{sweet handling Creating designs that give your airplane great flying qualities NEAL WILLFORD { 50 APRIL 2006 Jim Koepnick it s safe to say no designer wants to create a lousy flying airplane. Why is it
AIRFOILS Part 1. By Chris Heintz, P. Eng.
Heintz' Textbook AIRFOILS Part 1 By Chris Heintz, P. Eng. [This article is part 1 of a 4 part series, where aeronautical engineer Chris Heintz discusses light aircraft airfoils.] We have to keep in mind
The Wright Brother's Flyer
History of flight 1903 Orville and Wilbur Wright and the First Flight. Orville and Wilbur Wright were very deliberate in their quest for flight. First, they spent many years learning about all the early
Irrigation &Hydraulics Department lb / ft to kg/lit.
CAIRO UNIVERSITY FLUID MECHANICS Faculty of Engineering nd Year CIVIL ENG. Irrigation &Hydraulics Department 010-011 1. FLUID PROPERTIES 1. Identify the dimensions and units for the following engineering
Trimming and Flying a Hand Launch Glider A basic and beginners guide by Kevin Moseley
Trimming and Flying a Hand Launch Glider A basic and beginners guide by Kevin Moseley First and foremost, I am by no means a master at what I have done, or do, in hlg or the class. I am fortunate enough
Rigging the Pitts by Doug Sowder, IAC #14590
Rigging the Pitts by Doug Sowder, IAC #14590 Pitts not flying so straight anymore? Don t believe that a Pitts can fly hands-off? Maybe you need to set aside a Saturday and do some rigging. The maintenance
Section 1a: Airfields Can Be Dangerous Places! Learn the rules for access to an airfield. Read the statements below and tick the correct answer.
AIR ACTIVITIES BADGE Stage 3 Name: Pack: 1 Section 1a: Airfields Can Be Dangerous Places! Learn the rules for access to an airfield. Read the statements below and tick the correct answer. 1. The Troop
The author's TD Coupe, used as a towplane, and the Airhopper. The gas model is equipped with an automatic towline release.
THE AIRHOPPER BY STANLEY ORZECK PLANS BY PAUL PLECAN An eight-foot sailplane either towed by a gas model or launched by hand tow. The author's TD Coupe, used as a towplane, and the Airhopper. The gas model
VIII.A. Straight and Level Flight
VIII.A. Straight and Level Flight References: FAA-H-8083-3; FAA-H-8083-25 Objectives Key Elements Elements Schedule Equipment IP s Actions SP s Actions Completion Standards The student should develop the
Translation of 109 high speed trials. Spring Plane: 109 F with G wings W.Nr Original german text is included.
Translation of 109 high speed trials Spring 1943 Plane: 109 F with G wings W.Nr. 9228 Original german text is included. What is so special about the 109 horizontal stabilizer trim? Like modern jets the
No Description Direction Source 1. Thrust
AERODYNAMICS FORCES 1. WORKING TOGETHER Actually Lift Force is not the only force working on the aircraft, during aircraft moving through the air. There are several aerodynamics forces working together
MANDATORY BULLETIN No.: SAFETY RELATED. EV a SR. Appendix 1 Bulletin Flow Chart
Appendix 1 Bulletin Flow Chart Form No.: QS-406/F-03A Issue: Date of Issue: Page: 2 APPENDIX 2 Inspection of Nicopress Pressing Tooling: Vernier calliper or Nicopress check gauge Felt-tip pen to mark clamps
CARL GOLDBERG PRODUCTS LTD.
CARL GOLDBERG PRODUCTS LTD. P.O. Box 818, Oakwood, GA 30566 678-450-0085 Fax: 770-532-2163 www.carlgoldbergproducts.com copyright 2003 Carl Goldberg Products, Ltd. WARNING! THIS IS NOT A TOY! THIS IS NOT
Miles M-57 Aerovan. Ok so on with the build.
Miles M-57 Aerovan Now it s been a few years since I have produced a design for Model World so young Mr Van Geffen decided I had sat on my laurels for too long and it was time to get the thumb screws out