2014 GUNSMITHING PRICE LIST

Transcription

1 2014 GUNSMITHING PRICE LIST PROHASKA S PRECISION SHOOTING 606 E BREWSTERST APPLETON WI PROHASKA S PRECISION SHOOTING CAN ACCOMMODATE OTHER GUNSMITHING JOBS NOT LISTED IN THIS PRICE LIST. PLEASE CALL WITH ANY QUESTIONS: OUR GUNSMITHING PRICING AND SERVICES AT ANY TIME.

2 SERVICE CHARGES Per Man Hour $60 Per Man Half Hour $30 Per Man and Machine Hour $75 Minimum Charge per gun $30 Inspect firearm and prepare written quote Clean & Oil Customer Gun Consists of completely stripping gun, cleaning all parts, inspecting for wear or damage, and written suggestions to customer for needed parts/repairs/adjustments Price No Charge Basic Cleaning $35 METAL FINISHING Metal Checkering Engine-Turning Bolt Engine-Turning Small Parts Draw-Filing SIGHT WORK $75 Sight in Customer Gun- Does not include cost of ammo, targets, etc. $65 Bore Sighting Customer Gun $15 Pattern Shotgun- Does not include cost of ammo, targets, etc. $65 Drill and Tap Barrel or Receiver for Sights $20 Cut Dovetail in Barrel $75 Install Front Site Ramp Sweat-on Type $65 Screw-on Type (including drill & tap) $50 Band Type Install Insert in Pistol Sight $40 Install Front or Mid-Rib Bead on Shotgun (plus cost of sight) $35 Plug hole and re-drill for bead $50 Install Receiver Sights Gun Drilled and Tapped $35 Install Handgun Sights Scope Mounting Gun Already Drilled and Tapped $45 Lapping in Rings $20 GENERAL BARREL, ACTION & RIFLE WORK Check Headspace $50 Make Chamber Cast $65 Remove Stuck Fired Case From Chamber Remove Live Round from Chamber

3 GENERAL BARREL, ACTION & RIFLE WORK (cont d) Remove Obstruction from Bore Remove Fouling from Barrel Lap Barrel $90 Cut and Crown Barrel (sight work additional) $65 Install Pre-threaded and chambered barrel- not including polishing & bluing $115 Lap in Bolt Lugs- not including setting back barrel or fitting new barrel $60 Welding on New Bolt Handle (Installing?) $80 Forging Bolt Handle $90 Inlet New Bolt to Stock and Receiver Make and Install Spring Install Safeties Dakota, Gentry, Mod 70 type Safety w/shroud (+finishing) $115 Mark II/Beuhler type $55 Chapman Swing Safety Lever $95 Triggers (Installation or adjustment) Shilen, Timney, Dayton-Traister, Moyer type $65 Double-Set $175 Single-Set $95 Install Muzzle Brake $105 Recontour Front or Rear Receiver Ring $95 Install Barrell Band Swivel SHOTGUN WORK Long Forcing Cone Non-plated bores, per barrel $55 Plated bores, per barrel $75 Resolder Rib- Not including bluing Resolder Forend Lug- Not including bluing Raising Dent in Barrel- Not including bluing $100 Straighten/Adjust Barrel $75 Polish Chamber/Bore $55 Back-Boring- Per Barrel, non-plated bores Open/Modify Choke- Per Barrel or tube, non-plated bores $55 Install Screw-In Choke (plus tubes) Win-Choke, Colonial, etc. (non-plated bore) $120 Port Barrel- per Barrel $115 Refitting Hinge Pin Lug $175

4 MUZZLE LOADER WORK Pull Ball Remove Broken Ramrod from Barrel $65 HANDGUN WORK Chamfer Revolver Barrel $35 Chamfer Revolver Cylinder $45 Revolver Action Job- Clean, smooth action, not including replacement parts $90 Rebarrel Revolver- Remove old barrel, replace with new factory barrel, labor only $75 Straighten Crane on Revolver $40 Install Crane Lock $40 Remove/Modify Revolver Hammer Spur $40 Convert Revolver From Square Butt to Round Butt $80 Semi-Auto Pistol Action Job- Clean, smooth action, not including any parts $75 Tighten Slide of 1911 Auto $80 Fit Barrel to 1911 Auto, Not including barrel Non-Ramped Barrel $80 Ramped Barrel $130 Fit and Install Barrel Bushing on 1911 Auto- Does not include cost of bushing $35 Bevel Magazine Well of 1911 Auto $45 Checker Front of Frame on 1911 Auto $175 Stipple Frame $65 Open and Modify Ejection Port of 1911 Auto Slide $45 Throat, Polish Barrel, and Feed Ramp of 1911 Auto $40 Fit New Trigger to 1911, Does not include cost of trigger $35 Fit Custom Hammer to 1911, Does not include cost of hammer $70 Cut Slide for BO MAR, w/o sight Plain Cut $135 w/slide Shields $160 Cut Slide for Dovetail Front Sight, w/o sight $75 Cut Slide for Novak Rear, w/o sight $85 Install Stake-On Front, w/out sight $45 Flatten Slide Top & Serrate, w/out sight $115 Dehorn & Break Edges for Carry (not including refinishing) $65 Full Melt Down Beveling $45 Modify 1911 Auto Frame for Beavertail Safety- Includes fitting of safety, does NOT include cost of safety or refinishing $100 Install Auto Pistol Compensator $220

5 STOCK WORK Wood Finishing (Does not include any shaping) Hunter Finish Unfilled oil or lacquer finish on average stock $120 Same finish but on complicated stock $140 Gunsmith Finish Filled, rubbed oil finish on average stock $170 Same finish but on complicated Stock $215 Spray Finish Lacquer or polyurethane $130 Poly-Satin Finish $200 High Gloss Filled Grain Poly Finish $300 Recutting Checkering, hour per panel Simple pattern $85 Complicated Pattern $125 Glass Bedding Barrel Action Hunting Rifle $110 Match Rifles, M-1 Garand, M1A, etc. $160 Pillar Bed $125 Install Recoil Pad- Labor only does not include cost of recoil pad $55 Install Adjustable Butt Plate- Labor only does not include cost of butt plate $105 Install Sling Swivels- Std and Q/D, Labor only does not include cost of sling swivels $45 Install Stock Cross Bolt (not including refinish) $60 Install Recoil Reducer Simple installation in butt stock $35 Hydraulic butt plate-style (Gra-Coil or Counter Coil ) $100 Drill Stock & Install Recoil Reducer $75 Inletting and Finishing of Semi-Finished Stock- Not including checkering, recoil pad, special butt plate grip cap or other attachments $425 Fit, Bed and Finish Fiberglass Stock Blank $260 Prefinished Synthetic Stock- Fit and install barreled action $95 Camo Painting Stock $85 Install Adjustable Comb Hardware $175 Stock Fitting-plus labor and supplies cost $80