SOUTH AFRICAN NATIONAL STANDARD

Size: px
Start display at page:

Download "SOUTH AFRICAN NATIONAL STANDARD"

Transcription

1 ISBN SOUTH AFRICAN NATIONAL STANDARD Tissue paper Part 5: Disposable wiping paper (in rolls) WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS

2 Table of changes Change No. Date Scope Amdt Amended to change the clause on inspection of rolls and to delete the test method for brightness. Foreword This South African standard was approved by National Committee SABS/TC 006/SC 03, Paper, board and pulps Paper, Tissue, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was approved for publication in January This document supersedes SANS :2008 (edition 1). A vertical line in the margin shows where the text has been technically modified by amendment No. 1. SANS 1887 consists of the following parts, under the general title Tissue paper: Part 1: General requirements. Part 2: Toilet paper. Part 3: Facial tissues. Part 4: Paper towels. Part 5: Disposable wiping paper (in rolls). Part 6: Paper dressing (medical) towels. Part 7: Paper serviettes. Part 8: Paper-towel rolls for centre-feed dispensing devices. Part 9: Wrappers for citrus and deciduous fruit. Annexes A and B form an integral part of this document. Annex C is for information only.

3 Contents Page Foreword 1 Scope Normative references Definitions 3 4 Requirements Packing Marking Inspection and methods of test Inspection Conditioning Dimensions Basis weight (grammage) Tensile properties, dry Tensile properties, wet Water absorption rate Total water absorption Brightness... 7 Amdt ph value... 7 Annex A (normative) Notes to purchasers... 8 Annex B (normative) Sampling and compliance with this part of SANS Annex C (informative) Quality verification of disposable wiping paper (in rolls) 10 Bibliography

4 This page is intentionally left blank 2

5 Tissue paper Part 5: Disposable wiping paper (in rolls) 1 Scope This part of SANS 1887 covers three types of tissue paper in rolls, intended for use as wiping paper in industrial, workshop, laboratory, office, agricultural and other environments where hands and tools and other equipment need to be wiped, cleaned or dried. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Information on currently valid national and international standards can be obtained from the SABS Standards Division. ISO 186, Paper and board Sampling to determine average quality. SANS , Tissue paper Part 1: General requirements. 3 Definitions For the purposes of this part of SANS 1887, the definitions given in SANS apply. 4 Requirements 4.1 Type Rolls of wiping paper shall be of one of the following types, as specified by the purchaser (see annex A): Type 1 (economy grade): an economy single-ply lower grammage grade intended for use where a cheap, reasonably strong, reasonably absorbent tissue is required, but where appearance and softness are relatively unimportant. The major area of application would be where heavily soiled items require cleaning that necessitates the use of large quantities of wiping paper, e.g. workshops. Type 2 (standard grade): a standard single-ply grade intended for use where a wet strength tissue is required, with reasonable qualities of appearance, strength, absorbency and softness. The general area of application would be the likes of light workshops and sculleries. 3

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-24871-0 SOUTH AFRICAN NATIONAL STANDARD The selection, use and maintenance of respiratory protective equipment Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-26055-2 SOUTH AFRICAN NATIONAL STANDARD Transportable pressure receptacles for compressed, dissolved and liquefied gases Basic design, manufacture, use and maintenance Published by SABS

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-20190-6 Any reference to SABS 0134 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The safeness of private swimming

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-21403-6 SOUTH AFRICAN NATIONAL STANDARD The warehousing of dangerous goods Part 2: The storage and handling of gas cylinders Table of changes Change No. Date Scope Foreword This South African

More information

RepublicofSouthAfrica

RepublicofSouthAfrica RepublicofSouthAfrica EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticeforal, abeterinformedcitizenry,theruleoflaw,worldtradeandworldpeace, thislegaldocumentisherebymadeavailableonanoncommercialbasis,asit

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-34475-7 ISO 10460:2005 SOUTH AFRICAN NATIONAL STANDARD Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing This national standard is the identical implementation

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-19012-5 SANS 50567:1997 Edition 1 and nat.amdt 1 EN 567:1997 Edition 1 Any reference to SABS EN 567 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November

More information

ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales

ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales INTERNATIONAL STANDARD ISO 4344 Second edition 2004-02-01 Steel wire ropes for lifts Minimum requirements Câbles en acier pour ascenseurs Exigences minimales Reference number ISO 2004 PDF disclaimer This

More information

ISO INTERNATIONAL STANDARD. Personal protective equipment for protection against falls from a height Single-point anchor devices

ISO INTERNATIONAL STANDARD. Personal protective equipment for protection against falls from a height Single-point anchor devices INTERNATIONAL STANDARD ISO 14567 First edition 1999-03-01 Personal protective equipment for protection against falls from a height Single-point anchor devices Équipements individuels de protection contre

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13729 First edition 2012-07-01 Ships and marine technology Ship s mooring and towing fittings Closed chocks Navires et technologie maritime Corps-morts et ferrures de remorquage

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-25419-3 SANS 347:2012 SOUTH AFRICAN NATIONAL STANDARD Categorization and conformity assessment criteria for all pressure equipment Published by SABS Standards Division 1 Dr Lategan Road

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 61245 Edition 2.0 2015-03 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 2782-1 Second edition 2016-04-15 Rubber, vulcanized or thermoplastic Determination of permeability to gases Part 1: Differential-pressure methods Caoutchouc vulcanisé ou thermoplastique

More information

YY Translated English of Chinese Standard: YY PHARMACEUTICAL INDUSTRY STANDARD

YY Translated English of Chinese Standard: YY PHARMACEUTICAL INDUSTRY STANDARD Translated English of Chinese Standard: YY1057-2016 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net PHARMACEUTICAL INDUSTRY STANDARD YY OF THE PEOPLE S REPUBLIC OF CHINA ICS

More information

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

ISO Vacuum gauges Calibration by direct comparison with a reference gauge INTERNATIONAL STANDARD ISO 3567 First edition 2011-12-15 Vacuum gauges Calibration by direct comparison with a reference gauge Manomètres Étalonnage par comparaison directe avec un manomètre de référence

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16148 Second edition 2016-04-15 Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 4302 Second edition 2016-10-01 Cranes Wind load assessment Appareils de levage à charge suspendue Évaluation des charges dues au vent Reference number ISO 4302:2016(E) ISO 2016

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 9523 Third edition 2015-08-01 Touring ski-boots for adults Interface with touring ski-bindings Requirements and test methods Chaussures de ski de randonnée pour adultes Zone

More information

ISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods

ISO INTERNATIONAL STANDARD. Snowboard plate-bindings without a release mechanism Requirements and test methods INTERNATIONAL STANDARD ISO 14790 Second edition 2005-02-01 Snowboard plate-bindings without a release mechanism Requirements and test methods Fixations de surf des neiges de type à plaque sans mécanisme

More information

Gear hobs Accuracy requirements

Gear hobs Accuracy requirements BRITISH STANDARD Gear hobs Accuracy requirements ICS 21.200 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS ISO 4468:2009 BS ISO 4468:2009 This British Standard was published

More information

ISO INTERNATIONAL STANDARD. Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis

ISO INTERNATIONAL STANDARD. Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis INTERNATIONAL STANDARD ISO 12213-2 Second edition 2006-11-15 Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis Gaz naturel Calcul du facteur de compression

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 10462 Third edition 2013-12-15 Gas cylinders Acetylene cylinders Periodic inspection and maintenance Bouteilles à gaz Bouteilles d acétylène Contrôle et entretien périodiques

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13732-1 First edition 2006-09-01 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces Ergonomie des

More information

Taiwan Bicycle Industry Standard

Taiwan Bicycle Industry Standard Taiwan Bicycle Industry Standard TBIS 4210-9 First edition 2016.01.01 Cycles Safety requirements for bicycles Part 9: Saddles and seat post test methods Reference number: TBIS 4210-9:2015 (FDTS) Contents

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9073-16 First edition 2007-12-01 Textiles Test methods for nonwovens Part 16: Determination of resistance to penetration by water (hydrostatic pressure) Textiles Méthodes d'essai

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 10256-3 First edition 2016-12-01 Protective equipment for use in ice hockey Part 3: Face protectors for skaters Équipements de protection destinés à être utilisés en hockey sur

More information

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Specifications and testing of LPG cylinder valves Self-closing

ISO INTERNATIONAL STANDARD. Gas cylinders Specifications and testing of LPG cylinder valves Self-closing INTERNATIONAL STANDARD ISO 14245 First edition 2006-02-15 Gas cylinders Specifications and testing of LPG cylinder valves Self-closing Bouteilles à gaz Spécifications et essais pour valves de bouteilles

More information

ISO INTERNATIONAL STANDARD. Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance

ISO INTERNATIONAL STANDARD. Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance INTERNATIONAL STANDARD ISO 10425 First edition 2003-08-15 Steel wire ropes for the petroleum and natural gas industries Minimum requirements and terms of acceptance Câbles en acier pour les industries

More information

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing

ISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 1940-1 Second edition 2003-08-15 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances

More information

ISO INTERNATIONAL STANDARD. Transportable gas cylinders Inspection and maintenance of cylinder valves

ISO INTERNATIONAL STANDARD. Transportable gas cylinders Inspection and maintenance of cylinder valves INTERNATIONAL STANDARD ISO 22434 First edition 2006-09-01 Transportable gas cylinders Inspection and maintenance of cylinder valves Bouteilles à gaz transportables Contrôle et maintenance des robinets

More information

ISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods

ISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods INTERNATIONAL STANDARD ISO 6570 First edition 2001-06-15 Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods Gaz naturel Détermination de la teneur en hydrocarbures liquides

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Operational procedures for the safe removal of valves from gas cylinders

ISO INTERNATIONAL STANDARD. Gas cylinders Operational procedures for the safe removal of valves from gas cylinders INTERNATIONAL STANDARD ISO 25760 First edition 2009-06-15 Gas cylinders Operational procedures for the safe removal of valves from gas cylinders Bouteilles à gaz Modes opératoires de dépose en toute sécurité

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 14456 First edition 2015-09-15 Gas cylinders Gas properties and associated classification (FTSC) codes Bouteilles à gaz Propriétés des gaz et codes de classification associés

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 19078 Second edition 2013-01-15 Gas cylinders Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas

More information

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 606 Fourth edition 2015-08-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 24431 Second edition 2016-11-01 Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60534-2-3 Edition 3.0 2015-12 colour inside Industrial-process control valves Part 2-3: Flow capacity Test procedures INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 23.060.40;

More information

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 2006 PDF disclaimer

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 6605 Third edition 2017-06 Hydraulic fluid power Test methods for hoses and hose assemblies Transmissions hydrauliques Méthodes d essai pour les tuyaux et flexibles Reference

More information

Transfusion equipment for medical use. Part 4: Transfusion sets for single use, gravity feed

Transfusion equipment for medical use. Part 4: Transfusion sets for single use, gravity feed Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1135-4 Sixth edition 2015-12-01 Transfusion equipment for medical use Part 4: Transfusion sets for single use, gravity feed Matériel de transfusion

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 2210.3:2009 AS/NZS 2210.3:2009 Australian/New Zealand Standard Occupational protective footwear Part 3: Specification for safety footwear (ISO 20345:2004, MOD) AS/NZS 2210.3:2009 This Joint Australian/New

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13970 First edition 2011-12-01 Recreational diving services Requirements for the training of recreational snorkelling guides Services relatifs à la plongée de loisirs Exigences

More information

ISO INTERNATIONAL STANDARD. Small craft Watertight cockpits and quick-draining cockpits

ISO INTERNATIONAL STANDARD. Small craft Watertight cockpits and quick-draining cockpits INTERNATIONAL STANDARD ISO 11812 First edition 2001-12-15 Small craft Watertight cockpits and quick-draining cockpits Petits navires Cockpits étanches et cockpits rapidement autovideurs Reference number

More information

EUROPEAN pr I-ETS TELECOMMUNICATION September 1995 STANDARD

EUROPEAN pr I-ETS TELECOMMUNICATION September 1995 STANDARD INTERIM DRAFT EUROPEAN pr I-ETS 300 671 TELECOMMUNICATION September 1995 STANDARD Source: ETSI TC-TM Reference: DI/TM-01029 ICS: 33.180.20 Key words: Optical transmission, optical connectors Transmission

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10691 First edition 2004-08-15 Gas cylinders Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after filling Bouteilles

More information

ISO 5355 INTERNATIONAL STANDARD. Alpine ski-boots Requirements and test methods. Chaussures de ski pour skis alpins Exigences et méthodes d'essai

ISO 5355 INTERNATIONAL STANDARD. Alpine ski-boots Requirements and test methods. Chaussures de ski pour skis alpins Exigences et méthodes d'essai INTERNATIONAL STANDARD ISO 5355 Fourth edition 2005-07-01 Alpine ski-boots Requirements and test methods Chaussures de ski pour skis alpins Exigences et méthodes d'essai Reference number ISO 2005 Provläsningsexemplar

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 17289 First edition 2014-07-01 Water quality Determination of dissolved oxygen Optical sensor method Qualité de l eau Dosage de l oxygène dissous Méthode optique à la sonde Reference

More information

Däck (PR-märkta serier) och fälgar för lantbrukstraktorer och -maskiner Del 3: Fälgar (ISO :2006, IDT)

Däck (PR-märkta serier) och fälgar för lantbrukstraktorer och -maskiner Del 3: Fälgar (ISO :2006, IDT) SVENSK STANDARD SS-ISO 4251-3:2006 Fastställd 2006-08-03 Utgåva 3 Däck (PR-märkta serier) och fälgar för lantbrukstraktorer och -maskiner Del 3: Fälgar (ISO 4251-3:2006, IDT) Tyres (ply rating marked series)

More information

ISO INTERNATIONAL STANDARD. Flow-metering devices for connection to terminal units of medical gas pipeline systems

ISO INTERNATIONAL STANDARD. Flow-metering devices for connection to terminal units of medical gas pipeline systems INTERNATIONAL STANDARD ISO 15002 Second edition 2008-07-01 Flow-metering devices for connection to terminal units of medical gas pipeline systems Dispositifs de mesure de débit pour raccordement aux prises

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition

ISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition INTERNATIONAL STANDARD ISO 11625 Second edition 2007-08-15 Gas cylinders Safe handling Bouteilles à gaz Sécurité de manutention Reference number ISO 2007 PDF disclaimer This PDF file may contain embedded

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 4210-2 Second edition 2015-09-01 Cycles Safety requirements for bicycles Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles Cycles Exigences

More information

BRITISH STANDARD BS 341-4: Transportable gas container valves. Part 4: Pressure relief devices ICS

BRITISH STANDARD BS 341-4: Transportable gas container valves. Part 4: Pressure relief devices ICS BRITISH STANDARD BS 341-4:2004 Transportable gas container valves Part 4: Pressure relief devices ICS 23.060.40 This British Standard, having been prepared under the direction of the Standards Policy and

More information

ISO INTERNATIONAL STANDARD. Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate

ISO INTERNATIONAL STANDARD. Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate INTERNATIONAL STANDARD ISO 9444-2 First edition 2009-06-01 Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate Acier inoxydable laminé à chaud en

More information

Protective equipment for use in ice hockey. Part 2: Head protection for skaters

Protective equipment for use in ice hockey. Part 2: Head protection for skaters Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10256-2 First edition 2016-12-01 Protective equipment for use in ice hockey Part 2: Head protection for skaters Équipements de protection destinés

More information

ISO INTERNATIONAL STANDARD. Cranes and lifting appliances Selection of wire ropes Part 1: General

ISO INTERNATIONAL STANDARD. Cranes and lifting appliances Selection of wire ropes Part 1: General INTERNATIONAL STANDARD ISO 4308-1 Third edition 2003-05-01 Cranes and lifting appliances Selection of wire ropes Part 1: General Grues et appareils de levage Choix des câbles Partie 1: Généralités Reference

More information

tbs TDC8(5630)P 3 Draft Tanzania Standard Textiles Ropes Specifications: Part 2. Ropes made from Man-made fibres (First edition)

tbs TDC8(5630)P 3 Draft Tanzania Standard Textiles Ropes Specifications: Part 2. Ropes made from Man-made fibres (First edition) tbs TDC8(5630)P 3 Draft Tanzania Standard Textiles Ropes Specifications: Part 2. Ropes made from Man-made fibres (First edition) TANZANIA BUREAU OF STANDARDS 0. FOREWORD 0.1 The range of man-made fibre

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10651-5 First edition 2006-02-01 Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators

More information

Part 2: Fluid power systems O-rings. Housing dimensions for general applications

Part 2: Fluid power systems O-rings. Housing dimensions for general applications Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3601-2 Second edition 2016-07-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10464 First edition 2004-08-15 Gas cylinders Refillable welded steel cylinders for liquefied petroleum gas (LPG) Periodic inspection and testing Bouteilles à gaz Bouteilles rechargeables

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 4126-9 First edition 2008-04-15 Safety devices for protection against excessive pressure Part 9: Application and installation of safety devices excluding stand-alone bursting

More information

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid INTERNATIONAL STANDARD ISO 23181 First edition 2007-08-15 Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid Transmissions hydrauliques Éléments

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10692-2 First edition 2001-08-01 Gas cylinders Gas cylinder valve connections for use in the micro-electronics industry Part 2: Specification and type testing for valve to cylinder

More information

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales INTERNATIONAL STANDARD ISO 2944 Second edition 2000-03-15 Fluid power systems and components Nominal pressures Transmissions hydrauliques et pneumatiques Pressions nominales Reference number ISO 2944:2000(E)

More information

ISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées

ISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées INTERNATIONAL STANDARD ISO 1977 Second edition 2006-08-15 Conveyor chains, attachments and sprockets Chaînes de manutention, plaques-attaches et roues dentées Reference number ISO 1977:2006(E) ISO 2006

More information

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes

ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes INTERNATIONAL STANDARD ISO 4250-3 Third edition 2006-08-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2006(E)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 13289 First edition 2011-12-01 Recreational diving services Requirements for the conduct of snorkelling excursions Services relatifs à la plongée de loisirs Exigences pour la

More information

ISO INTERNATIONAL STANDARD. Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs

ISO INTERNATIONAL STANDARD. Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs INTERNATIONAL STANDARD ISO 11334-4 First edition 1999-02-01 Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs Aides à la marche manipulées

More information

ISO INTERNATIONAL STANDARD. Pulps Determination of drainability Part 1: Schopper-Riegler method

ISO INTERNATIONAL STANDARD. Pulps Determination of drainability Part 1: Schopper-Riegler method Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5267-1 Second edition 1999-03-01 Pulps Determination of drainability Part 1: Schopper-Riegler method Pâtes Détermination de l'égouttabilité Partie

More information

ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 2: Housing dimensions for general applications

ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 2: Housing dimensions for general applications INTERNATIONAL STANDARD ISO 3601-2 First edition 2008-06-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et pneumatiques Joints toriques Partie

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8655-4 First edition 2002-09-15 Piston-operated volumetric apparatus Part 4: Dilutors Appareils volumétriques à piston Partie 4: Diluteurs Reference number ISO 8655-4:2002(E)

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing

ISO INTERNATIONAL STANDARD. Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing INTERNATIONAL STANDARD ISO 22435 First edition 2007-09-01 Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing Bouteilles à gaz Robinets de bouteilles avec détendeur

More information

ISO INTERNATIONAL STANDARD. Gas cylinders Fitting of valves to gas cylinders. Bouteilles à gaz Montage des robinets sur les bouteilles à gaz

ISO INTERNATIONAL STANDARD. Gas cylinders Fitting of valves to gas cylinders. Bouteilles à gaz Montage des robinets sur les bouteilles à gaz INTERNATIONAL STANDARD ISO 13341 Second edition 2010-10-01 Gas cylinders Fitting of valves to gas cylinders Bouteilles à gaz Montage des robinets sur les bouteilles à gaz Reference number ISO 13341:2010(E)

More information

AWS C2.21M/C2.21:2003 An American National Standard. Specification for Thermal Spray Equipment Acceptance Inspection

AWS C2.21M/C2.21:2003 An American National Standard. Specification for Thermal Spray Equipment Acceptance Inspection AWS C2.21M/C2.21:2003 An American National Standard Specification for Thermal Spray Equipment Acceptance Inspection Key Words Thermal spray equipment, flame arc, plasma, HVOF, acceptance inspection AWS

More information

ISO 5359 INTERNATIONAL STANDARD. Low-pressure hose assemblies for use with medical gases

ISO 5359 INTERNATIONAL STANDARD. Low-pressure hose assemblies for use with medical gases INTERNATIONAL STANDARD ISO 5359 Third edition 2008-06-15 Low-pressure hose assemblies for use with medical gases Flexibles de raccordement à basse pression pour utilisation avec les gaz médicaux Reference

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 24801-2 Second edition 2014-04-01 Recreational diving services Requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous diver Services relatifs à

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION ISO/TS 16973 First edition 2016-04-01 Respiratory protective devices Classification for respiratory protective device (RPD), excluding RPD for underwater application Appareils de

More information

Safe transport of radioactive materials Leakage testing on packages

Safe transport of radioactive materials Leakage testing on packages INTERNATIONAL STANDARD ISO 12807 Second edition 2018-09 Safe transport of radioactive materials Leakage testing on packages Sûreté des transports de matières radioactives Contrôle de l'étanchéité des colis

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD This is a preview - click here to buy the full publication ISO 80601-2-69 First edition 2014-07-15 Medical electrical equipment Part 2-69: Particular requirements for basic safety

More information

ISO 3724 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using particulate contaminant

ISO 3724 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using particulate contaminant INTERNATIONAL STANDARD ISO 3724 Second edition 2007-08-15 Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using particulate contaminant Transmissions hydrauliques Éléments

More information

ISO INTERNATIONAL STANDARD. Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General

ISO INTERNATIONAL STANDARD. Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General INTERNATIONAL STANDARD ISO 7146-1 First edition 2008-10-15 Plain bearings Appearance and characterization of damage to metallic hydrodynamic bearings Part 1: General Paliers lisses Aspect et caractérisation

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14573 First edition 2002-05-01 Corrected version 2003-05-15 Snowboard strap bindings for soft boots Requirements and test methods Fixations de surf des neiges pour chaussures

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 23269-1 First edition 2008-02-01 Ships and marine technology Breathing apparatus for ships Part 1: Emergency escape breathing devices (EEBD) for shipboard use Navires et technologie

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 5167-5 First edition 2016-03-01 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 5: Cone meters

More information

SVENSK STANDARD SS-ISO :2005. Däck och fälgar (metrisk serie) för lantbrukstraktorer

SVENSK STANDARD SS-ISO :2005. Däck och fälgar (metrisk serie) för lantbrukstraktorer SVENSK STANDARD Fastställd 2005-09-19 Utgåva 3 Däck och fälgar (metrisk serie) för lantbrukstraktorer och -maskiner Del 1: Beteckningar, dimensioner, märkning och däck/fälg-koordination (ISO 7867-1:2005,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 7396-1 Third edition 2016-02-15 Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum Systèmes de distribution de gaz médicaux Partie

More information

ISO 4081 INTERNATIONAL STANDARD. Rubber hoses and tubing for cooling systems for internal-combustion engines Specification

ISO 4081 INTERNATIONAL STANDARD. Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 4081 Third edition 2010-06-01 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Tubes et tuyaux en caoutchouc

More information

First edition

First edition TECHNICAL SPECIFICATION ISO/TS 15453 First edition 2017-04 Gas cylinders Seamless steel and aluminium-alloy gas cylinders Evaluation of existing gas cylinders and consideration of their safe use in other

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD Second edition 1995-05-01 Fluid power systems and components - Connectors and associated components - Nominal pressures Transmissions hydrauliques et pneuma tiques - Raccords et

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 5366 First edition 2016-10-01 Anaesthetic and respiratory equipment Tracheostomy tubes and connectors Matériel d anesthésie et de réanimation respiratoire Raccords et tubes de

More information

ISO INTERNATIONAL STANDARD. Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method

ISO INTERNATIONAL STANDARD. Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method INTERNATIONAL STANDARD ISO 10498 First edition 2004-06-01 Ambient air Determination of sulfur dioxide Ultraviolet fluorescence method Air ambiant Dosage du dioxyde de soufre Méthode par fluorescence dans

More information

Yacht Harbours Minimum Requirements

Yacht Harbours Minimum Requirements PRIVATE CIRCULATION SVS/2_12_0066 ISO 2012 All rights reserved ISO TC 228/WG 8 Date: 2012-03-29 ISO/WD Nxx41 ISO TC 228 / WG 8 Secretariat: Yacht Harbours Minimum Requirements Ports de Plaisance Élément

More information

ISO 2503 INTERNATIONAL STANDARD

ISO 2503 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 2503 Third edition 2009-07-15 Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied

More information

INTERNATIONAL STANDARD. Cranes - Safety signs and hazard pictorials - General principles

INTERNATIONAL STANDARD. Cranes - Safety signs and hazard pictorials - General principles INTERNATIONAL STANDARD ISO 13200 First edition 1995-12-15 Cranes - Safety signs and hazard pictorials - General principles Appareils de levage a Charge suspendue - - Principes g&gt-aux Signaux de s&uritg

More information

ISO Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors

ISO Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5356-2 Third edition 2012-11-15 Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Matériel

More information

ISO INTERNATIONAL STANDARD. Sleep apnoea breathing therapy Part 2: Masks and application accessories

ISO INTERNATIONAL STANDARD. Sleep apnoea breathing therapy Part 2: Masks and application accessories INTERNATIONAL STANDARD ISO 17510-2 Second edition 2007-10-01 Sleep apnoea breathing therapy Part 2: Masks and application accessories Thérapie respiratoire de l'apnée du sommeil Partie 2: Masques et accessoires

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 17089-1 First edition 2010-11-15 Measurement of fluid flow in closed conduits Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement Mesurage

More information

ISO INTERNATIONAL STANDARD. Personal fall-arrest systems Part 1: Full-body harnesses

ISO INTERNATIONAL STANDARD. Personal fall-arrest systems Part 1: Full-body harnesses INTERNATIONAL STANDARD ISO 10333-1 First edition 2000-07-01 Personal fall-arrest systems Part 1: Full-body harnesses Systèmes individuels d'arrêt de chute Partie 1: Harnais complet Reference number ISO

More information

ISO/TR TECHNICAL REPORT. Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation)

ISO/TR TECHNICAL REPORT. Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) TECHNICAL REPORT ISO/TR 12148 First edition 2009-02-15 Natural gas Calibration of chilled mirror type instruments for hydrocarbon dewpoint (liquid formation) Gaz naturel Étalonnage des instruments du type

More information