screw fittings - nickel plated brass series SC
|
|
- Morgan Tyler
- 6 years ago
- Views:
Transcription
1 screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical acc. to ISO /1 or conical acc. to ISO /1, M acc. to ISO R/ outside tube diameter...1 mm materials nickel plated brass suggested piping materials polyamide (PA), polyurethane (PU/CP), polyethylene (PE), PTFE (PT) pipe tolerances +/- 0,0mm until diameter mm, +/- 0,1mm from diameter mm medium compressed air, neutral gases medium temperature C operating pressure bar, depending on the maximum pressure of the piping used assembly instruction 1. cut the hose squarely 2. put swivel nut at the hose 3. push the hose and lock nut over the hose cone until the limit stop is reached. close the lock nut by hand or, if necessary, with a hexagon spanner SC01N-EN-/0 STASTO Automation KG page 1 of
2 SC straight male stud fitting - cylindrical thread /2, Mx0, 3, SC-0-M-N-D /2, G1/" SC-0-1-N-D Mx0, SC-0-M-N-0 G1/", SC-0-1-N-0 Mx0, SC-0-M-N-0 Mx1, 2 SC-0-X1,-N-D Mx1, 2 SC-0-X1,-N-D G1/",, SC-0-1-N-0,, 2 SC-0--N-0 G3/" 2 2 SC-0-3-N SC-0--N-0 / G1/", SC-0-1-N-0 /,, SC-0--N-0 / G3/" 2 SC-0-3-N-0 / 2 0 SC-0--N-0 / G1/", 2, SC--1-N-0 /, 2, 2 SC---N-0 / G3/" SC--3-N-0 / 2 SC---N-0 / G3/", 1 3 SC--3-N-0 /, SC---N-0 1/, 3, 2 SC-1--N-0 /2, R1/",, SCC-0-1-N R1/" SCC-0-1-N R1/" 2, 1 SCC-0-1-N SCC-0--N R3/",, SCC-0-3-N / R1/" 2, 1 SCC-0-1-N / SCC-0--N / R3/",, 2 SCC-0-3-N / R1/" 2, SCC--1-N /, 2 SCC---N / R3/", 3 SCC--3-N / 3 SCC---N / R3/", 3, 1 3 SCC--3-N / 3, 1 0 SCC---N 1/, 3, 2 SCC-1--N SCC straight male stud fitting - conical thread SCC swivel male stud fitting - conical thread SC01N-EN-/0 STASTO Automation KG CH3 R1/" 3 SCC-0-1-N-YA 0 2 SCC-0--N-YA / R1/" 3 2 SCC-0-1-N-YA / 0 SCC-0--N-YA / 2 3 SCC---N- / R3/", 3 3 SCC--3-N- page 2 of
3 SC straight female fitting G1/" SC-0-1-N 2 2 SC-0--N / G1/" SC-0-1-N / 2 2 SC-0--N / G3/", 2, SC-0-3-N / SC-0--N /, SC---N / G3/", 3 SC--3-N / G3/",, 1 SC--3-N SC straight connector [mm] D2 [mm] 2, SC-0-N 3, SC-0-N / / 3 SC-0-N / / 3 3 SC--N / / 1 1 SC--N 1/, 1/,, 3 SC-1-N SC L-swivel union D2 D3 G1/" 1, 2, / G1/" L,, 2,, 2 SC-0-1-N-0-2 SC-0--N-0-2 SC-0-1-N-0- / 1, 2, 2 SC-0--N-0- / 1, 2, 2 SC---N-0- / G3/" 1 SC--3-N-0-,,, SC L-swivel union SC01N-EN-/0 STASTO Automation KG /2, Mx0, /2, G1/" Mx0, G1/" Mx0, G1/" / G1/" / / L,,, 2,, 2,, 2,,, 2,, G3/" 2,, / 2, / G3/", page 3 of SC-0-M-N 2 SC-0-1-N SC-0-M-N 2 SC-0-1-N SC-0-M-N 2 SC-0-1-N, 2 SC-0--N 2 3 SC-0-1-N, SC-0--N 3 2 SC-0-3-N,, SC---N, 3 SC--3-N
4 SC swivel male elbow - cylindrical thread G1/" / G1/" / / CH3 SC-0-1-N-0-3 SC-0--N SC-0-1-N-0-3 SC-0--N SC---N-0- SCC male elbow - conical thread /2, /2, Mx0, 1, SCC-0-M-N R1/", SCC-0-1-N R1/", SCC-0-1-N Mx1, SCC-0-MX1,-N Mx1, SCC-0-MX1,-N R1/" SCC-0-1-N SCC-0--N R3/",, SCC-0-3-N / R1/" SCC-0-1-N / SCC-0--N / R3/", 2 SCC-0-3-N / R1/" 1,, 2 SCC--1-N /,, SCC---N / R3/",, 3 SCC--3-N / 2, 0 SCC---N / R3/", 2, 1 SCC--3-N / 2, 1 0 SCC---N 1/, 2 3 SCC-1--N SC elbow connector,, /, SC-0-N, SC-0-N 2 SC-0-N /,, 3 SC--N / 1 0 SC--N 1/, 3 3 SC-1-N SC female elbow SC01N-EN-/0 STASTO Automation KG G1/" G1/", / G1/" / / / G3/" page of, SC-0-1-N SC-0-1-N SC-0--N 2 SC-0-1-N, SC-0--N, 2 SC---N, 2, 1 0 SC--3-N
5 SC cross connector 3 3 SC-0-N SC-0-N / 2 SC-0-N / SC--N SCC T-fitting - conical thread R1/" 3 1 SCC-0-1-N R1/" 2 SCC-0-1-N,, 3 SCC-0--N / R1/",, 3 SCC-0-1-N /,, 1 SCC-0--N /, 1 SCC---N / R3/", 1 1 SCC--3-N / R3/", 2, 0 1 SCC--3-N / SCC---N 1/, 2 2 SCC-1--N SC swivel- male end fitting D2 D3 G1/" 1, 2, / G1/" / 1, 2, / 1, 2, / G3/" L,, 3 SC-0-1-N-0-3 SC-0-N-0-1 SC-0-1N-0-2 SC-0-N-0-2 SC--N-0- SC--3N-0-2,,,,, SC swivel- male end fitting SC01N-EN-/0 STASTO Automation KG Mx0, G1/" Mx0, G1/" / L,, 2,, 2 2,,, G1/", / 2, / G3/" 2, / / G3/" page of 1 SC-0-M-N SC-0-1-N SC-0-M-N SC-0-1-N 3 SC-0--N 2 SC-0-1-N,, SC-0--N, 3 SC-0-3-N 2,,, 2 SC---N,, 3 3 SC--3-N
6 SC2C T-fitting - conical thread L R1/", 3, SC2C-0-1-N R1/" 3, 2 SC2C-0-1-N 2, 3 SC2C-0--N / R1/", 0, 3 SC2C-0-1-N /, 3, 0 SC2C-0--N /,, SC2C---N / R3/",, 1 SC2C--3-N / R3/", 2,, 1 2 SC2C--3-N / 2,, 1 0 SC2C---N 1/, SC2C-1--N SC2 bulkhead fitting Mx0, 0, Mx1, / Mx1, / Mx1 0 / Mx1 1/, Mx1 3 / SC2-0-N SC2-0-N 3 SC2-0-N, 3 SC2--N 3, 1 SC2--N, 2 SC2-1-N SC2 T-connector, SC2-0-N SC2-0-N 2 SC2-0-N / 1, SC2--N / 0 1 SC2--N 1/, 3 SC2-1-N SC swivel nut with antikink spiral SC01N-EN-/0 STASTO Automation KG Mx1 SC-0-N-YA / Mx1 3, 1 SC-0-N-YA / Mx1, SC--N-YA / Mx1 1 1 SC--N page of
7 SC swivel nut /2, Mx0, 1 SC-0-MX0,-N Mx0,, 1 SC-0-MX0,-N Mx0, 2 SC-0-MX0,-N Mx1, SC-0-MX1-N / Mx1, SC-0-MX1-N / Mx1, SC--MX1-N / Mx1 1 SC--MX1-N 1/, Mx1 1, SC-1-MX1-N SC3 banjo /2, /2, M, SC3-0-M-N M 3, SC3-0-M-N-M* /2, G1/" 1, SC3-0-1-N M,, SC3-0-M-N M, SC3-0-M-N-M* 1/" 1 SC3-0-1-N M SC3-0-M-N M, SC3-0-M-N-M* 1/" 1 SC3-0-1-N 1/" 2,, SC3-0--N / 1/" 1 SC3-0-1-N / 1/" 2,, 2 SC3-0--N / 3/" 2,, 3 SC3-0-3-N / 1/" 2,, SC3---N 3/",, 1 SC3--3-N / *for banjo flow control valve and unidirectional banjo flow control valve SC3 double banjo SC3-0-M-N M 3, 1/" 1 0 SC3-0-1-N M 3, SC3-0-M-N 1/" 1 0 SC3-0-1-N 1/" 3, 3 SC3-0--N / 1/" 1 0 SC3-0-1-N / 1/", 3 SC3-0--N / 3/", 2 SC3-0-3-N / 1/", SC3---N / 3/" 1, SC3--3-N SC0 plug adapter height C C 0 C 0 C SC0-0-D 3 SC0-0-D / 3 2 SC0-0-D illustrations are for information only and are non-binding all designs, configurations, measurements and materials are subject to change without prior notice SC01N-EN-/0 STASTO Automation KG page of
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationPrestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationNew, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
More informationTOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
More informationBarbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
More informationSTC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationTechnifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
More informationProduct Range. Product Range
Product Range Product Range EXCELLENT SOLUTIONS FOR COMPRESSED AIR With more than 30 years experience in pneumatic field, Aignep is an Italian leading manufacturer of compressed air elements. Aignep is
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationCENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES
P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationNHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationParker Legris Machine Safety: Product Sheets
Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply
More informationPneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationKOMPLETNÍ PNEUMATICKÉ ROZVODY
KOMPLETNÍ PNEUMATICKÉ ROZVODY KOPR s.r.o. Kněžmost Sokolská 170 294 02 Kněžmost PRICE LIST BRASS QUICK FITTINGS RAP 7 2009 WE OFFER : - quantity discounts - other parts made to customer specifications
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationFlow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
More informationCompression Fittings
Advantages o flaring, soldering or other preparation of tubing necessary to assemble. This economical fitting is readily available in a broad selection of styles. anufactured from CA 360, CA 35 or CA 377
More informationGas Welding Hoses and connections, the weak link
Gas Welding Hoses and connections, the weak link By Leif Andersen, Technical Product Manager Welding, WSS Regulators with flashback arrestors and the shank with its welding or cutting attachment are made
More informationNickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8
More informationDifferential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
More informationAVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationSpare parts list ( ) Spare parts list Puzzi 8/1 C *CUL
Spare parts list (5.970-773.0) Spare parts list Puzzi 8/1 C *CUL 10.02.2012 www.kaercher.com EN Table of contents Spare parts list Puzzi 8/1 C *CUL (5.970-773.0)... 6 10 Tank (0.164-775.0)... 7 20 Individual
More informationFLOWMETER UNITS FLOWMETER DEVICES, BY-PASS SYSTEMS
FLOWMETER UNITS The range of anesthesia flowmeter units series FM, SF and RM, available in different configurations, makes it possible to offer many options to meet various requirements in the operating
More informationINSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
More informationSimple to install connection fails. The Talbot Pushfit fitting is pressure rated PN 16.
Talbot Pushfit Talbot Pushfit - Fittings for Water Pipe Talbot Grippa Universal Service Connector The Talbot Pushfit connection is a tried and tested method of connecting low, The Talbot Grippa is a universal
More informationSpare parts list ( ) Spare parts list HD 1090 WS *
Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...
More informationGENERAL CATALOGUE 2O16
GENERAL CATALOGUE 2O16 LABORATORY TAPS INDEX TECHNICAL INFORMATION PAGES DRY SERVICE CONTROLS PAGES PRESENTATION TECHNICAL INFORMATION DESIGN AND MANUFACTURING 1 2-3 4 BENCH MOUNTED WALL MOUNTED PENDANT
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationF Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges
Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure
More informationCI-SfB 732 (5-1) x. - laboratory fittings
CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves
More informationDifferential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.
More informationPART NO. UPC DESCRIPTION QTY LBS
24 Iron Pipe Fittings Product Applications For use with brass, copper or iron pipe. Designed for low and medium pressure pipe line connections. Typically used in water, grease, fuels, LP and natural gas,
More information>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
More informationSeries KJ. Miniature One-touch Fittings. Applicable Tube
Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing,
More informationISO INTERNATIONAL STANDARD. Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements
INTERNATIONAL STANDARD ISO 17165-1 First edition 2007-10-15 Hydraulic fluid power Hose assemblies Part 1: Dimensions and requirements Transmissions hydrauliques Flexibles de raccordement Partie 1: Dimensions
More informationDN 1/4" to 3" Female BSP - 10 C C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 3" Female BSP - 10 C + 120 C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore Materials
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationSTAD. Balancing valves DN 15-50
STAD Balancing valves DN 15-50 IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the
More informationPush-in fittings QB, NPT
General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating
More informationBeamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL
Beamex PG PRESSURE GENERATORS 97 Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG pressure generators are portable hand-operated pressure generators and ultimate field calibration pumps 98 Calibration pumps
More informationMODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL
MODEL MN-PWV PRESSURIZED WATER VESSEL ASSEMBLY OPERATING MANUAL Prepared by CR Manning Edited by SC Woidtke Rev August 22, 2011 PRESSURIZED WATER VESSEL OPERATING MANUAL 1. Background 1.1 The Pressurized
More informationEncore PE 50-lb Feed Hopper
Instruction Sheet P/N 160429-01 Encore PE 50-lb Feed Hopper WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related
More informationBROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB
BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum
More informationBY GREGGERSEN CATA LOG
MEDICAL DEVICES BY GREGGERSEN CATA LOG COMBINATION UNITS t h e r e i s n o s u b s t i t u t e CATALOG COMBINATION UNITS Hawk variants AND THEIR AREAS OF APPLICATION The HAWK PORTABLE EMERGENCY TREATMENT
More informationTechnical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
More informationSelf-operated Regulators Accessories Differential Pressure and Flow Regulators
Self-operated Regulators Accessories Differential Pressure and Flow Regulators Compression-type fittings Needle valves Compensation chambers Orifice plates Welding neck flanges Control lines Application
More informationInstructions for Use. Plug connection for medical gas and vacuum acc. to DIN / 2004 DIN EN ISO
Instructions for Use Plug connection for medical gas and vacuum acc. to DIN 13260-2 / 2004 DIN EN ISO 9170-1 Table of Contents Page 1. MANUFACTURER S DATA... 3 2. INTRODUCTION... 4 3. APPLICATION... 5
More informationISO Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5356-2 Third edition 2012-11-15 Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Matériel
More informationLEAK TROUBLESHOOTING
LEAK TROUBLESHOOTING If you suspect that your TMC isolation system is leaking (most often evidenced by going through air/nitrogen tanks too quickly), this guide will help you to find and fix the problem.
More informationSPECIALIST GAS VALVES AND FITTINGS
SPECIALIST GAS VALVES AND FITTINGS 0 HISTORY 1830 1900 1987 1997 1998 2007 2009 Creation of Chuchu Decayeux Chuchu Decayeux manufactures and creates gas lighting systems Chuchu Decayeux begins to specialize
More informationY:\Machine Manuals & Spare Parts Lists\PARTS BREAKDOWN\Commercial CW Gas\HD850WS Page 1
1.0 PIECE PARTS - parts listing 1 5311-0710 Nut 1 2 5443-2820 Hose Stem 1 3 6362-3950 O-Ring Seal 14.0x1.78 1 4 6414-2820 Strainer 1 5 6313-0030 Spring 2 6 5321-1980 Handhold 1 7 5066-2120 Cover 1 8 5363-1350
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationJRGURED Pressure reducing valves
JRG JRGURED Pressure reducing valves JRGURED 12 11 6 5 7 3 1 4 2 8 10 9 The JRGURED pressure reducing valves is a compact fitting for water systems consisting of a strainer and a pressure reducing valve.
More informationptfe and stainless steel hoses
ptfe and stainless steel hoses 3 table of contents Description P.004 Description of FX01 hoses P.004 Description of FX02 hoses P.004 Description of FX03 hoses P.005 Description of FX06 hoses P.005 DESCRIPTION
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationSafety valves. Component-tested safety valves DN Compressed Air Accessories II Hoses, valves etc. 15. Technical data. Exhaust capacity air
Component-tested s DN 6 Safety valves serve to blow out non-poisonous and non flammable gases into the atmosphere in order to protect pressure tanks against overpressure. Please note: Only s that have
More informationSpare parts list ( ) Spare parts list HD 1.8/13 C Ed
Spare parts list (5.972-842.0) Spare parts list HD 1.8/13 C Ed 26.05.2015 www.kaercher.com EN Table of contents Spare parts list HD 1.8/13 C Ed (5.972-842.0)... 6 10 Housing... 7 11 Housing... 8 12 Hand
More informationSERVICE KITS SPECIFICATIONS GENERAL DESCRIPTION. RM052S-XXX-XX Two Post Lift / Ram
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). RM052S-XXX-XX RM052S-XXX-XX TWO POST LIFT / RAM For use with 5 gallon /
More informationConnection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
More informationHow to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow
One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter
More information2016 /17 Catalog. distributed exclusively throughout the U.S by
BALL VALVES/SEACOCKS Ball Valve ½ NPS 90659 2211 Ball Valve ¾ NPS 90660 2228 Ball Valve 1 NPS 90661 2235 Ball Valve 1¼ NPS 90662* 2242 Ball Valve 1½ NPS 90663 2259 Ball Valve 2 NPS 90664 2266 THRU-HULL
More informationRM052S-XXX-XX TWO POST LIFT / RAM
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). INGERSOLL RAND COMPANY LTD 209 NORTH MAIN STREET BRYAN, OHIO 43506 (800)
More informationTraining. tm PA90 Series - Lung Demand Valve
D Training Dräger tm12842 PA90 Series - Lung Demand Valve Index Section 1 Instructions for Use Section 2 Introduction and Safety Warnings Section 3 Product Description Section 4 Operating Principle Section
More informationSpare parts list ( ) Spare parts list HDS 700 B
Spare parts list (5.955-875.0) Spare parts list HDS 700 B 02.09.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 700 B (5.955-875.0)... 6 10 Individual parts... 7 11
More informationPneumatic Function Fittings Metric & Inch
Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches
More informationDamao Range. Single & Double Line Pressure Regulator - 4 or 8 bar
Damao Range Single & Double Line Pressure Regulator - 4 or 8 bar Single and Double line pressure regulator for double stage medical gas distribution systems. 10 to 4 bar pressure regulator for all medial
More informationSTAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationCoiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
More informationTECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
More informationNHR-X-X Encore Feed Hoppers
Instruction Sheet P/N 60986-0 NHR-X-X Encore Feed Hoppers WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.
More informationSERVICE KITS SPECIFICATIONS GENERAL DESCRIPTION. y Use only genuine ARO replacement parts to assure compatible. RM051S-XXX-XX Single Post Lift / Ram
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). RM051S-XXX-XX RM051S-XXX-XX SINGLE POST LIFT / RAM For use with 5 gallon
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationSEMI FIXED/PORTABLE LINE PROPORTIONERS SLP NPR270
SEMI FIXED/PORTABLE LINE PROPORTIONERS SLP Simple Inexpensive Foam Proportioner Portable Inlet Pressure Choices 90 to 200 PSI Foam Rate 44 GPM to 362 GPM Salt Water Compatible Special Flow And Pressure
More informationCoding of banjo flow controllers. Actuation M = Manual S = Screwdriver
Flow control valves Unidirectional and bidirectional (meter-in, meter-out, orifice) banjo flow controllers Series SCU, MCU, SVU, MVU, SCO, MCO Ports M5, 1/8, 1/4, 3/8, 1/2 BSPP (without adapters) General
More informationSanitizer Parts. Sanitizer Parts. Replacement Parts for Sanitizers
Sanitizer Parts for Sanitizers 513 Automatic Feeder Model 300, 302, 300-19, 300-29 Order No.: R171016 R171026 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded
More informationR84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
More informationRM051S-XXX-XX SINGLE POST LIFT / RAM
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). INGERSOLL RAND COMPANY LTD 209 NORTH MAIN STREET BRYAN, OHIO 43506 (800)
More informationSpare parts list ( ) Spare parts list HD 1090
Spare parts list (5.955-696.0) Spare parts list HD 1090 26.01.2015 * www.kaercher.com EN Table of contents Spare parts list HD 1090 * (5.955-696.0)... 6 10 Individual parts... 7 11 Individual parts...
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationDN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
More informationpatented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationBall Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Shut-off Valve Ball Valve Series 564 ontrol Open/lose Air Supply. Ensure Effective Area for Variety of Tube Dia. Easily Adjustable
More informationPump On Demand. Skimmer System
Pump On Demand Skimmer System POD (Pump on Demand) Skimmer System Application Out-of-the-box LNAPL recovery in 2-inch and larger-diameter wells. The POD Skimmer model TR-610 recovers light-end hydrocarbons
More informationCylinder Controls. Operating information. For ATEX specific products contact Sales Office. 2/2 Blockers. PDE2600PNUK Parker Pneumatic
A range of speed controls, flow controls and back pressure sensors designed to be mounted directly onto the cylinder in the optimum position for maximum performance. "Push-in" or threaded connection Multifunction
More informationTANK MATE INCLUDES: TOOLS REQUIRED: CONRADER VALVES 3/4 WRENCH **TUBING CUTTERS TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING
CONRADER VALVES TANK MATE AUTOMATIC DRAIN VALVE INSTALLATION KIT INCLUDES: TEE PETCOCK TEE ASSEMBLY 8 FOOT NYLON TUBING WV-1 DRAIN VALVE TOOLS REQUIRED: 3/4 WRENCH **TUBING CUTTERS ** NEEDED TO CUT METAL
More informationPush-In Fitting Type with Stop Valve
http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage
More information