e2c 20 - easy to connect

Size: px

Start display at page:

Download "e2c 20 - easy to connect"

Magdalene Walker
5 years ago
Views:

1 closer contacts Fieldbus Communications e2c 20 - easy to connect

e2c 20 / IP 20 Distributed I/O System for Switch Cabinets Switch cabinets and distribution boxes continue to rely on wiring systems that can be controlled using standard fieldbus components, while

Interfaces to Profibus, DeviceNet and Ethernet/IP fieldbus systems are made available over the bus coupler.

switch cabinet and a small number of I/O signals.

2 e2c 20 / IP 20 Distributed I/O System for Switch Cabinets Switch cabinets and distribution boxes continue to rely on wiring systems that can be controlled using standard fieldbus components, while enabling easy connection to sensors and actuators. e2c 20 is a compact, IP20 rated, modular fieldbus station that enables a wide range of flexible applications. Interfaces to Profibus, DeviceNet and Ethernet/IP fieldbus systems are made available over the bus coupler. A proven, cost-effective solution for simple applications IP 20 wiring systems are ideal for applications involving small assembly and handling machines where no long distances exist between the switch cabinet and a small number of I/O signals. e2c 20 provides special features such as practical, removable terminal blocks, making it possible to wire and maintain systems and machines of this type cost-effectively. Installation The station is mounted on a standard DIN rail. Wires are connected over spring cage terminals, which ensure fast and reliable wiring. Individual modules in the station are easy to replace. This is done by releasing the latch on the lower side of the module and taking the module out of the module group. No tools are required to replace the module. Since the terminal block (orange) can be completely removed from the module, it is not necessary to disconnect any of the wires before replacing a module. Simply pull out the latch located at the upper end of the terminal block. Afterwards, the block can be easily inserted into another module. Module Locking Terminal Block Locking 2 Fieldbus Communications / e2c 20 - easy to connect Introduction Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

Fieldbus Communications e2c 20 - easy to connect Introduction the bus coupler The bus coupler is a component that depends on the fieldbus and exchange process, in addition to the diagnostic data from

The I/O modules are attached next to the bus coupler. Interface to sensors and actuators: I/O modules Special modules Modules are available with both digital and analog inputs and outputs.

Analog modules can have 4 (input modules) or 2 channels (output modules), which cover the most commonly used measuring ranges.

3 Fieldbus Communications e2c 20 - easy to connect Introduction the bus coupler The bus coupler is a component that depends on the fieldbus and exchange process, in addition to the diagnostic data from the station. At the same time, the bus coupler uses the internal bus to control communication with the attached I/O modules. The station is supplied with power entirely over the bus coupler. The I/O modules are attached next to the bus coupler. Interface to sensors and actuators: I/O modules Special modules Modules are available with both digital and analog inputs and outputs. Digital I/O modules are available with 4, 8 or 16 channels. The different number of channels allows users to adapt the station as needed. Analog modules can have 4 (input modules) or 2 channels (output modules), which cover the most commonly used measuring ranges. To extend the power capacity for the system, sensors and actuators beyond 10A or to create separate power groups, two modules are available. While one module is rated up to 230V/10A for the use with relay outputs, all other I/O modules can be supplied by a 24VDC/10A supply module. Additional system modules provide connections to 24VDC, ground (0V) and earth (shield). End cap The station is terminated with an end cap. The end cap protects contacts for the internal bus and power supply from inadvertent contact or damage. The benefits Fieldbus independent I/O modules Power feeding at the bus coupler Mounting the modules on standard DIN rail Exchange of an I/O module inside the sssembly without additional tools Connection via spring-type terminals Removable terminal blocks Wiring does not have to be disconnected if the module is changed Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

4 Product Characteristics Especially suitable for robotic applications (resistance to torsion). Very good resistance to oils, coolants and lubricants as well as emulsions. Suitable for use in C-Tracks. Very good resistance to flying weld slag (e.g.) unfinished constructions). Very good resistance to acids, lye and chemical cleaning agents. Very good electromagnetic resistance (EMC) and shielded systems. Very good vibration and shock resistance. approved. CSA approved. 4 Fieldbus Communications / e2c 20 - easy to connect Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

Fieldbus Communications e2c 20 - easy to connect Contents 0920 PSL 001 / 0920 DSL 001 / 0920 ESL 001 e2c 20 Network Adapters for DeviceNet, Profibus, and EtherNet/IP applications.

5 Fieldbus Communications e2c 20 - easy to connect Contents 0920 PSL 001 / 0920 DSL 001 / 0920 ESL 001 e2c 20 Network Adapters for DeviceNet, Profibus, and EtherNet/IP applications. page UEM 011 / 0922 UEM 014 e2c 20 I/O modules with 4 digital inputs. 4 In (Analog) 16 In 8 in 4 in 0922 UEM 012 / 0922 UEM 015 e2c 20 I/O modules with 8 digital inputs UEM 013 / 0922 UEM 016 e2c 20 I/O modules with 16 digital inputs. page page page UEM 030 / 0922 UEM 031 / 0922 UEM 032 / 0922 UEM 033 e2c 20 I/O modules with 4 analog inputs. page 12 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

0922 UEM 034 / 0922 UEM 035 e2c 20 I/O module with 2 analog inputs. 2 in (Analog) page 13 0922 UEM 50 e2c 20 I/O modules with 2 digital relay outputs.

6 0922 UEM 034 / 0922 UEM 035 e2c 20 I/O module with 2 analog inputs. 2 in (Analog) page UEM 50 e2c 20 I/O modules with 2 digital relay outputs. 2 Out page UEM 020 / 0922 UEM 021 / 0922 UEM 022 e2c 20 I/O modules with 4 digital outputs. 4 Out page UEM 023 e2c 20 I/O module with 8 digital outputs. 8 Out page UEM 024 e2c 20 I/O module with 16 digital outputs. 16 Out page Fieldbus Communications / e2c 20 - easy to connect Contents Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

Fieldbus Communications e2c 20 - easy to connect Contents 0922 UEM 040 / 0922 UEM 041 / 0922 UEM 042 / 2 Out (Analog)

supply terminals page 20-21 0921 UEC 502 / 0921 UEC 503 / 0921 UEC 504 / 0921 UEC 505 e2c 20 potential distribution

page 22 ASBV 8/LED FBK 20 / 0925 UAC 400/3 M e2c 20 connection accessory, actuator/sensor distribution box and receptacle

7 Fieldbus Communications e2c 20 - easy to connect Contents 0922 UEM 040 / 0922 UEM 041 / 0922 UEM 042 / 2 Out (Analog) 0922 UEM 043 e2c 20 I/O modules with 2 analog outputs page UEC 500 / 0921 UEC 501 e2c 20 potential power supply terminals page UEC 502 / 0921 UEC 503 / 0921 UEC 504 / 0921 UEC 505 e2c 20 potential distribution terminals. page UEC 001 e2c 20 end cap module. page 22 ASBV 8/LED FBK 20 / 0925 UAC 400/3 M e2c 20 connection accessory, actuator/sensor distribution box and receptacle connector, M23. page 22 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

8 0920 DSL 001 e2c 20 DeviceNet Network Adapter PSL 001 e2c 20 Profibus-DP/V1 Network Adapter ESL 001 e2c 20 EtherNet/IP Network Adapter. 8 Fieldbus Communications / e2c 20 - easy to connect Network Adapters Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

9 Fieldbus Communications e2c 20 - easy to connect Network Adapters Technical Data Degree of protection IP 20 Operating temperature range -20 C (-4 F) to +60 C (140 F) Weight DSL 001: 155 g PSL 001: 150 g ESL 001: Bus system Baud rate setting automatic Address range / Rotary address DSL 001: 0-63 dec switches PSL 001: 1-99 dec MAC ID ESL 001: Devicenet (0920 DSL 001) ID number Product type: 12, Product code: 256 EDS file 0920 DSL 001.eds Transmission rate 125, 250, 500 kbit/s Profibus DP (0920 PSL 001) ID number GSD file EtherNet/IP (0920 ESL 001) Id number EDS file Transmission rate System data 06D4 hex Lum_06D4.gsd 10/100 MBit/s 0920 DSL 001 Number I/O modules max. 32 I/O data total 33 byte I incl. status / 32 byte O I/O data digital 256 I / 256 O I/O data analog 16 channel 0920 PSL 001 Number I/O modules max. 32 I/O data total 128 byte I / 128 byte O I/O data digital 1024 I / 1024 O I/O data analog 64 channel Reverse polarity protection yes 0920 ESL 001 Number I/O modules max 32 I/O data total I/O data digital I/O data analog System power Rated voltage Voltage range Power consumption Reverse polarity Current for I/O modules Current limit protection for I/O modules Field power Rated voltage Voltage range Current in jumper contacts Diagnostics Module status Network status Expansion module status Field power status Accessories (incl.) 24 V DC V DSL 001: V PSL 001: V ESL 001: yes max V yes 24 V DC V max. 10 A DSL 001: LED, green/red PSL 001: LED, green/red DSL 001: LED green/red PSL: 001: LED green LED, green/red LED, green 0921 UEC 001: end cap module Part numbers 0920 DSL PSL ESL 001 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

10 0922 UEM 011 (PNP) / 0922 UEM 014 (NPN) e2c 20 4-point 12V/ 24V DC discrete input modules 0922 UEM 012 (PNP) / 0922 UEM 015 (NPN) e2c 20 8-point 12V/ 24V DC discrete input modules UEM 013 (PNP) / 0922 UEM 016 (NPN) e2c 20 8-point 12V/ 24V DC discrete Input modules. 10 Fieldbus Communications / e2c 20 - easy to connect Modules Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

11 Fieldbus Communications e2c 20 - easy to connect Modules Technical data Operating temperature range -20 C (-4 F) to +60 C (140 F) Weight UEM 011 / UEM 012 / UEM 014 UEM 015: 70 g UEM 013 / UEM 016: 65 g Power supply Nominal voltage from USystem 5 V Power consumption UEM 011 / UEM 012 / UEM 014 UEM 015: max. 35 ma UEM 013 / UEM 016: max. 45 ma Input power supply Nominal voltage Voltage range from UAUX 24 V DC V Inputs Type 2 acc. to IEC Nominal input voltage 24 V DC Signal state V Signal state V Input current at 24 V 6 ma Input circuit UEM 011 / UEM 012 / UEM 013: PNP UEM 014 / UEM 015 / UEM 016: NPN Number of digital channels UEM 011 / UEM 014: 4 UEM 012 / UEM 015: 8 UEM 013 / UEM 016: 16 Channel status indicator Module diagnostics Indication LED, green Network status LED, red/green Part numbers 0922 UEM UEM UEM UEM UEM UEM 016 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

12 0922 UEM 030 e2c 20 4-channel 12-bit 0 to 20mA analog current input UEM 031 e2c 20 4-channel 12-bit 4 to 20mA analog current input. Technical data Degree of protection IP 20 Operating temperature range 0 C (32 F) to +60 C (140 F) Weight 70 g Power supply Rated voltage Power consumption from USystem 5 V max. 200 ma Inputs Measurement signal Resolution Measuring fault Input impedence UEM 030: 0-20 ma UEM 031: 4-20 ma UEM 032: 0-10 V UEM 033: V 12 bit ± 25 C (77 F) UEM 030 / UEM 031: 120 Ohm UEM 032 / UEM 033: 500 kohm Conversion time 4 ms per module Number of analog channels UEM 032 e2c 20 4-channel 12-bit 0 to 10V analog voltage input UEM 033 e2c 20 4-channel 12-bit -10 to +10V analog voltage input. Diagnostic UEM 030 / UEM 032 / UEM 033: no Channel status indicator UEM 031: low voltage LED, green/red Diagnostic Indication Network status LED, red/green Part numbers 0922 UEM UEM UEM UEM Fieldbus Communications / e2c 67 - easy to connect Modules Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

13 Fieldbus Communications e2c 67 - easy to connect Modules 0922 UEM 034 e2c 20 2-channel RTD input (PT / Ni / Resistors). Technical data Degree of protection IP 20 Operating temperature range 0 C (32 F) to +60 C (140 F) Weight 70 g Power supply Rated voltage Power consumption Inputs Sensor types from USystem 5 V max. 200 ma UEM 034: PT100, PT200, PT500, PT1000, PT50, Ni100, Ni120, Ni200, Ni500, Ni1000, resistor measurement (10, 20, 100 mohm) UEM 035: B, R, S, N, K, E, J, T, 30 mv (1µV/bit) Connection technology Resolution UEM 034: 2 or 3-wire UEM 035: 2-wire UEM 034: 0.1 C (0.18 F) / 10 mohm 0922 UEM 035 e2c 20 2-channel thermocouple input (B/R/S/N/K/E/J/T Type, 30mV, 1µV/bit). UEM 035: 0.1 C (0.18 F) / 1uV Conversion time 200 ms / all channels Measuring fault ± 0.1% full 25 C (77 F) Data format 16 bit integer (2 s complement) Number of channels 2 Diagnostics Over range Channel status indicator LED, green/red Diagnostics Indication Network status LED, red/green Part numbers 0922 UEM UEM 035 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

14 0922 UEM 050 e2c 20 2-point 230V ac/ 2A, 24V dc/ 2A relay output. 14 Fieldbus Communications / e2c 20 - easy to connect Modules Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

15 Fieldbus Communications e2c 20 - easy to connect Modules Technical data Operating temperature range Weight Power supply Rated voltage Power consumption Output power supply Rated voltage Voltage range Outputs Switching voltage (resistive load) Switching current (at rated voltage) Minimum load Switching delay time Switching cycle -20 C (-4 F) to +60 C (140 F) 70 g from USystem 5 V max. 65 ma 24 V DC V Relay 5-30 V 2.0 A 48 V 0.8 A 110 V 0.3 A 250 V 2 A V DC V DC V DC V AC 100 µa, 100 mv per channel Off->On: max. 10 ms On->Off: max. 10 ms (resistive load) (inductive load) Number of digital channels 2 Channel type N.O. Channel status indicator LED, green Module diagnostics Indication Network status LED, red/green Part numbers 0922 UEM 050 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

16 0922 UEM 020 e2c 20 4-point 24V dc/0.5a discrete output UEM 021 / 0922 UEM 022 e2c 20 4-point 24V dc/0.5a discrete output w/ diagnostics UEM 021: 0.5 A / 0922 UEM 022: 2 A 0922 UEM 023 e2c 20 8-point 24V dc/0.5a discrete output UEM 024 e2c point 24V dc/0.3a discrete output with a 20-pin connector. 16 Fieldbus Communications / e2c 20 - easy to connect Modules Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

17 Fieldbus Communications e2c 20 - easy to connect Modules Technical data Operating temperature range -20 C (-4 F) to +60 C (140 F) Weight UEM 020 / UEM 022 / UEM 021 UEM 023: 70 g UEM 024: 65 g Power supply from USystem Rated voltage 5 V Power consumption UEM 020 / UEM 021 UEM 022: max. 35 ma UEM 023: max. 40 ma UEM 024: max. 45 ma Channle type Channel status indicator Module diagnostics Indication Channel diagnostics (only UEM 022 / UEM 021) Indication N.O. LED, green Network stats LED red/green Broken wire Over current limit Shiort-circuit Over temperature LED, red Output power supply Rated voltage Voltage range from UAUX 24 V DC V Outputs UEM 020 / UEM 023 / UEM 021: Type 0.5 A acc. to IEC UEM 022: Type 2 A acc. to IEC UEM 024: Type 0.3 A acc. to IEC Rated output current UEM 020 / UEM 021 / UEM 023: 0.5 A UEM 022: 2 A UEM 024: 0.3 A Short circuit-proof yes Max output current UEM 020 / UEM 021: 2A per module UEM 022: 8 A per module UEM 023: 4 A per module UEM 024: 1.6 A per module Overload-proof yes Number of digital channels UEM 020 / UEM 021 / UEM 022: 4 UEM 023: 8 UEM 024: 16 Part numbers 0922 UEM UEM UEM UEM UEM 024 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

18 0922 UEM 040 e2c 20 2-channel 12-bit 0 to 20mA analog current output UEM 041 e2c 20 2-channel 12-bit 4 to 20mA analog current output UEM 042 e2c 20 2-channel 12-bit 0 to 10V analog voltage output UEM 043 e2c 20 2-channel 12-bit - 10 to 10V analog voltage output. 18 Fieldbus Communications / e2c 20 - easy to connect Modules Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

19 Fieldbus Communications e2c 20 - easy to connect Modules Technical data Degree of protection IP 20 Operating temperature range -0 C (32 F) to +60 C (140 F) Weight 70 g Power supply Rated voltage Power consumption from USystem 5 V UEM 040 / UEM 041max. 65 ma UEM 042: max. 120 ma UEM 043: max. 250 ma Output power supply from UAUX Rated voltage 24 V (only UEM 040 / UEM 041) Voltage range V (only UEM 040 / UEM 041) Outputs Output signal Resolution Measuring fault UEM 040: 0-20 ma UEM 041: 4-20 ma UEM 042: 0-10 V UEM 043: V 12 bit ± 0.1% Full 25 C (77 F) Resistive load UEM 040 / UEM 041: max. 500 Ohm UEM 042 / UEM 043: min. 5 kohm Conversion time UEM 040 / UEM 041: 2 ms UEM 042: 2ms per channel UEM 043: 2 ms per module Number of analog channels 2 Diagnostics yes Channel status indicator LED, green/red Diagnostics Indication Network status LED, red/green Part numbers 0922 UEM UEM UEM UEM 043 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

20 0921 UEC 500 e2c 20 system module for additional power supply of 24 VDC UEC 502 e2c 20 potential distributor for 24V dc (8x) and 0V (8x) field power UEC 501 e2c 20 system module for additional power supply of 110/230 V AC, 10A (for relay modules) UEC 503 e2c 20 potential distributor for 24 dc field power (8x). 20 Fieldbus Communications / e2c 20 - easy to connect Accessories Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

21 Fieldbus Communications e2c 20 - easy to connect Accessories 0921 UEC 504 e2c 20 potential distributor for 0V field power (8x) UEC 505 e2c 20 2-channel 12-bit - 10 to 10V analog voltage output. Technical data Operating temperature range Weight Power supply Rated voltage Voltage range Power supply Rated voltage Voltage range -20 C (-4 F) to +60 C (140 F) UEC 500 / UEC 501: 70 g UEC 502 / UEC 503 / UEC 504 / UEC 505: 65 g from USystem 24 V DC V DC from UAUX 5 V 1 A Field power UAUX Rated voltage 24 V DC (± 20%) Current in jumper contacts 10 A 0921 UEC 501 Field power Rated voltage Current in jumper contacts UAUX 24/48 V DC, 110/220 V AC 10 A 0921 UEC 502 Connection points Number 24 V 4 Number 0 V UEC 503 Connection points Number 24 V UEC 504 Connection points Number 0 V UEC 505 Connection points Number earth/shield 8 Part numbers 0921 UEC UEC UEC UEC UEC UEC 505 Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

22 0921 UEC 001 e2c 20 end cap module. ASBV 8/LED FBK 20 e2c 20 connection accessory, actuator/sensor distribution box with LED operation and function indicators, 8 ports, combined FIX- CON/MER socket, 5 poles, 2 signals per socket, earth connection with 20 pole ribbon cable connection at the rear UAC 400/3 M e2c 20 connection accessory, receptacle connector, M23 female connector for rear mounting, assembled with ribbon cable and connector, solder contacts potted with epoxy. Part numbers 0921 UEC 001 ASBV 8/LED FBK UAC 400/3 M 22 Fieldbus Communications / e2c 20 - easy to connect Accessories Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

23 Fieldbus Communications e2c 20 - easy to connect Part Number Index Part Number Page Part Number Page 0920 DSL ESL PSL UEC UEC UEC UEC UEC UEC UEC UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UEM UAC 400/3 M 22 ASBV 8/LED FBK The policy of Lumberg, Inc. is to sell our products through Authorized Stocking Distributors. Our distributors provide the market with technical support, service, and local stock. For application assistance or for the location of your nearest Lumberg, Inc. Distributor, please visit our website: Specifications in this manual are subject to change without notice. Lumberg, Inc. also reserves the right to make modifications and makes no guarantee to the accuracy of the information contained herein. Lumberg s Warranty, Terms and Conditions apply. For literature and media questions or concerns: Contact Marketing Communications at info@lumbergusa.com Fieldbus Communications - e2c 20 - easy to connect / Lumberg, Inc. / Justice Road, Midlothian, VA / Tel. (804) / Fax (804)

, Automation Components 14121 Justice Road Midlothian, VA 23113 - USA Phone + 1

com Fieldbus Communications - e2c 20 www.lumbergusa.

24 Copyright Lumberg, Inc. All rights reserved. Printed in USA. Lumberg, Inc., Automation Components Justice Road Midlothian, VA USA Phone Fax info@lumbergusa.com Fieldbus Communications - e2c 20 Lumberg Automation Components GmbH & Co. KG Im Gewerbepark Schalksmühle Postfach Schalksmühle - GERMANY Phone +49 (0) Fax +49 (0) info@lumberg.de NP-E2-C1-1106

Zelio Relays RSL Slim Interface Plug-In Relays

Zelio Relays RSL Slim Interface Plug-In Relays Catalog 8501CT0901 2009 Class 8501 CONTENTS Description............................................. Page Introduction.................................................3