Code 61 4-Bolt Flanges
|
|
- Cecilia Shaw
- 6 years ago
- Views:
Transcription
1 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: 4-Bolt s O Ring Boss National Pipe hread Socket eld Pipe Socket eld ube Butt eld Pipe Cover Plates Union Plates Gage Blocks ransitions Blanking Plates 42-1
2 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: O Ring Boss (ORB) / ORB / O Ring Face ORB Socket Head Mounting Kit Supplied ORB #8 (3/4-16) 1/2 11/ #12 (1-1/16-12) 3/4 13/ #12 (1-1/16-12) / #16 (1-5/16-12) / #16 (1-5/16-12) / #20 (1-5/8-12) / #20 (1-5/8-12) / #24 (1-7/8-12) / #24 (1-7/8-12) / #32 ( ) / #32 ( ) / ORB / Companion Face ORB #8 (3/4-16) 1/2 5/ #12 (1-1/16-12) 3/4 3/ #12 (1-1/16-12) / #16 (1-5/16-12) / #16 (1-5/16-12) / #20 (1-5/8-12) / ORB #20 (1-5/8-12) / #24 (1-7/8-12) / #24 (1-7/8-12) / #32 ( ) / #32 ( ) /
3 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: National Pipe hread (NP) / NP / O Ring Face NP Socket Head Mounting Kit Supplied NP /2-14 1/2 11/ /4-14 3/4 13/ / / / / / / / / / / / / / / / / / NP / Companion Face NP /2-14 1/2 5/ /4-14 3/4 3/ / / / / / / / NP / / / / / / / / / /
4 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Socket eld Pipe (SP) / SP / O Ring Face SP Hex Head Mounting Kit Supplied Socket eld Pipe /2 (0.845) 1/2 11/ /4 (1.055) 3/4 13/ /4 (1.055) / (1.320) / (1.320) / (1.670) / (1.670) / (1.910) / (1.910) / (2.385) / (2.385) / (2.888) / (2.888) / (3.510) / (3.510) / (4.010) / (4.010) / (4.510) / SP / Companion Face SP /2 (0.845) 1/2 5/ /4 (1.055) 3/4 3/ /4 (1.055) / (1.320) / (1.320) / (1.670) / (1.670) / (1.910) / Socket eld Pipe (1.910) / (2.385) / (2.385) / (2.888) / (2.888) / (3.510) / (3.510) / (4.010) / (4.010) / (4.510) /
5 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Socket eld ube (S) / S / O Ring Face S Hex Head Mounting Kit Supplied Socket eld ube /2 (0.505) 1/2 11/ /8 (0.630) 1/2 11/ /4 (0.755) 3/4 13/ (1.005) 3/4 13/ (1.005) / (1.255) / (1.255) / (1.510) / (1.510) / (1.760) / (2.010) / (2.010) / S / Companion Face S /2 (0.505) 1/2 5/ /8 (0.630) 1/2 5/ /4 (0.755) 3/4 3/ (1.005) 3/4 3/ (1.005) / Socket eld ube (1.255) / (1.255) / (1.510) / (1.510) / (1.760) / (2.010) / (2.010) /
6 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Sch 80 Butt eld Pipe (BP) / Sch 80 Butt eld Pipe / O Ring Face Hex Head Mounting Kit Supplied Sch 80 Butt eld Pipe BP /2 Sch 80 1/2 11/ /4 Sch 80 3/4 13/ Sch / Sch / Sch / Sch / Sch / Sch / Sch / Sch / Sch 80 Butt eld Pipe / Companion Face BP /2 Sch 80 1/2 5/ /4 Sch 80 3/4 3/ Sch / Sch / Sch 80 Butt eld Pipe Sch / Sch / Sch / Sch / Sch / Sch /
7 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Blanking & Cover Plates O Ring Face Blanking Plates 1/2 Hex Head Mounting Kit Supplied c/w O Ring /4 13/ / / / / / / / / For O Ring Head Style Blanking Plugs, See Flat Face Blanking Plates 1/ /4 13/ / / / / / / / / Gage Steel.030 Gasket Hex Head Mounting Kit Supplied Protective Cover Plates /4 13/ / / / / / / / /
8 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Union Plates Companion Union Plates /4 3/ / / / / / / / / Sandwich Union Plates 1/ /4 13/ / / / / / / / /
9 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: Sandwich Style Gage Blocks 1.00 Sandwich Style Gage Blocks #6 ORB /4 13/ / / / / / / All sandwich style gage blocks come with #6 ORB side port and are 1.00 thick c/w O Ring / / #6 ORB Sandwich Style Gage Blocks /4 13/ / All sandwich style gage blocks come with #6 ORB side port and are 1.00 thick c/w O Ring / / / / / / /
10 INDUSRIES D. 730 Eaton ay, Annacis Business Park oll Free ebsite: ransition s P R P R Q Q Step-Up ransition Step-Down & Orientation ransitions Part No. Comp O Ring P Q R Part No. Comp O Ring P Q R /4 1/ / Q Split Kit Required for mounting See part number 1585-SIE P R /2 1/ /2 3/ /4 3/ / / / Code 62 ransition Socket Head Mounting Kit Supplied Part No. Code 62 Comp O Ring P Q R /2 1/ /4 3/ For Code 62 ransitions See Page Socket Head Mounting Kit Supplied 42-10
(714) Irvine Pipe & Supply, Inc.
STEEL PIPE STEEL STEEL SCHEDULE 40 PIPE TYPE 316 STANDARD LENGTH: 20 (AVAILABLE IN 5 & 10 LENGTHS) SIZE 1/4 #SP62 3/8 #SP63 1/2 #SP65 3/4 #SP67 1 #SP610 1-1/4 #SP612 1-1/2 #SP615 2 #SP620 2-1/2 #SP625
More informationProcess Industry Practices Pipeline Systems
September 2013 Process Industry Practices Pipeline Systems PIP PLX03CS5S01 Pipeline Systems, ASME B31.8 Material Specification Inside Production, Well Site Facility, Class 300, Carbon Steel, 0.03125" (1/32
More informationFlange Catalog. Your choice for Hydraulic Components.
Flange Catalog Your choice for Hydraulic Components www.dmic.com SAE Port Flanges A Comprehensive Lineup of Industry Leading Premium Port Flanges Due to our policy of continual product improvement, the
More informationPIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process
February 2018 Piping PIP PN03SA0S03 Piping Material Specification 3SA0S03 Class 300, 304/304L Stainless Steel, Socket Weld, C.A.-None, Low Temperature Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationDirectional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationGripTight Isolation Plug Test Plug Standard Sizes
GripTight Isolation Plug Test Plug Standard s PAGE 1 OF 9 PIPE SIZE SCH 5 10 20 30 40 60 80 100 120 140 160 XXS 3/4" GTDBB 075P5 GTDBB 075P10 N/A N/A GTDBB 075P40 N/A GTDBB 075P80 N/A N/A N/A GTDBB 075P160
More informationPIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, C.A., Process
May 2016 Piping PIP PN03SA0S01 Piping Material Specification 3SA0S01 Class 300, 304/304L Stainless Steel, Socket Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationInstallation Guide RHT-380. This Manual Must Be Read Before Operating The Equipment CUSTOMER COPY
Installation Guide This Manual Must Be Read Before Operating The Equipment RHT-380 Madison Heights, Michigan 48071 800-725-8377 www.snowexproducts.com CUSTOMER COPY Trynex International 2013 (REV B) F50767
More informationTEST SPECIFICATION NYT-677-C
TEST SPECIFICATION NYT-677-C CODE OF TESTS FOR TESTING KM-2 VENT VALVE PORTION, PC. 748715 (DWG. VV-389) (AB TEST RACK) ISSUE NO. 2 WARNING: HIGH PRESSURE AIR IS PRESENT IN THE TEST RACK AND ASSEMBLY BEING
More informationMUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
More informationThread Gages Tolerances
Class X Thread Gage s on Half-Angle of Thread ± N NN' on Major or Minor Diameter on Pitch Diameter Above Above /2 Dia. 4 Dia. Through Through 4 Dia. 8 Dia. s Above 8 Dia. Through 2 Dia. Threads per Inch
More informationPIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, C.A. Process (PTFE Packing/Gaskets)
May 2016 Piping PIP PN03SV0S01 Piping Material Specification 3SV0S01 Class 300, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A. Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationEngineering Data Sheet
Page 1 of 6 CE MARKING AND THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC Valves must be installed into a well designed system and it is recommended that the system be inspected in accordance with the appropriate
More informationInstallation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
More informationPiece Weight. List Price. Basket Strainer-Plastic. Wash Tray Plug. TIP TOE Tub Drain. Shower Drain Grids
PLUMBING SPECIALTIES PS_1018 EFFECTIVE OCTOBER 1, 2018 (SUPERCEDES PS_0918) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Bath Coupling Elbow 123-096
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationGas Valve Replacement Kit
Kit Part Number:PGRKIT01 Parts List 1. Honeywell VK8115V 2. /Orifice Gasket. Torx Screws ( pcs) 4. Venturi/Blower Housing Gasket 5. # 25 Torx Wrench. 1 2 4 Recommended tools: A. Pipe Wrench. B. Phillips
More informationTSX1600L Rite-Lock Power Arm Kit, left Stowing W/One Top Mount Pivot W/20" Base & 27" Upper
Ref TSX1600L Tarp System, Left Stowing Top Mount W/ Long Upper SN:TS 1 1 10210 Gear Motor, Tarp Stretcher w/5 Year Warranty 24V - S/N: TS 1 2 103810L Pivot, Assembled Front Arm for 103796 Power Kit Passenger
More informationEncore PE 50-lb Feed Hopper
Instruction Sheet P/N 160429-01 Encore PE 50-lb Feed Hopper WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related
More informationPIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
More informationNominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)
PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationPier Port single sided 12' x 18' full set (including adapter post AP1, nic dock brackets)
Pier Port 600 Series Pier Port 500 Series Pier Port S100 Series Pier Port single sided 12' x 18' full set $3,990 Pier Port single sided 12' x 21' full set $4,390 Pier Port single sided 12' x 24' full set
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationSpare Parts catalogue 2012
Spare Parts catalogue 2012 TriFlo Pump Number Description Part # Pump Model Quantity 1 Barrel Union Nut 9-2008 AH, XH, ET, ST, SK 2 2 Barrel Union Pipe Socket 9-2007 AH, XH, ET, ST, SK 2 3 O-ring Barrel
More informationVG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 11, 005 GAS009R1 VGG VGD0 VGD0 Description Only when assembled to SKP
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationSpecifications For Threaded and Butt Weld Hammer Unions
.02 Introduction Pacific Hoseflex offers a comprehensive range of standard and sour gas. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. - Three lug
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationNo October, Eaton. Gear Pumps. Parts Information. Series 26 Model Single Gear Pumps
Eaton Gear Pumps No. 6-634 October, 1995 Parts Information Series 26 Model 26000 Single Gear Pumps Pump Parts Drawing Righthand (CW) pump rotation shown. 14b 17 11 4D 1 25 9 4A 10 4B 14a 40 Plug 3 7 13
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationH4802, H4802-1, H , and Pole Tampers
SERVICE MANUAL H4802, H4802-1, H-4802-6, and 43227 Pole Tampers Serial Codes FKA, FKF, FKM, FZP, FZR, FZT, and FZV Read and understand all of the instructions and safety information in this manual before
More informationAPPENDIX A MAIN ASSEMBLIES
32 Gorski G2000SS Diving Helmet Technical Manual APPENDIX A MAIN ASSEMBLIES MANIFOLD BODY ASM SEE APPENDIX C 25 ft.lbs (34 Nm) 22 SS Blank Plug INNER 90 in.lbs COMPONENTS (10 Nm) INNER COMPONENTS SEE APPENDIX
More informationTechnical Service Parts Breakdown
Drive / Shaft Drive Shaft Solenoid Brushholder C.E. Housing Model 1 1A 1B 2 3 4 M125R2001SEP K072105476S N/A N/A S2104463S M007105863S M012105498S M125R2001SEPN K072105476S N/A N/A S2104463S M007105863S
More informationPVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationNHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed
More informationProduct Catalogue. Version 8.0. GSection. Hendrickson Suspension
Product Catalogue GSection Version 8.0 Hendrickson Suspension Section G Air Suspension Components Hendrickson HTE Suspension G:28 PRODUCT CATALOGUE 8.0 Hendrickson HTE Suspension - Part List Part No. Item
More informationNHR-X-X Encore Feed Hoppers
Instruction Sheet P/N 60986-0 NHR-X-X Encore Feed Hoppers WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.
More informationPARTS: AIRPREP AFTERCOOLERS AND AIR DRYERS
PARTS: AIRPREP AFTERCOOLERS AND AIR DRYERS MOTOR AND FAN PARTS ITEM/MODEL ACS/ADS 250 ACS/ADS 400 ACS/ADS 750 ACS/ADS 950 ACS/ADS 1200 ACS/ADS 1600 Air motor 1300-040-03 1300-040-03 1300-040-03 1300-090-03
More information4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More information10.1 Main Unit. INDEPENDENT WHOLESALE WELDING SUPPLY Ph: Fax: Website:
10.1 Main Unit 10.1 Main Unit 1 Case 60031802 1 2 Cross feed holder 60031803 1 3 Cross feed liner 60031804 1 4 Handle 60031805 1 5 Fan cover 60031806 1 6 Bottom plate 60031807 1 7 Heat shield 60031808
More informationFisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves
Instruction Manual Lever-Lock Handlever Actuator Fisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications...
More information20 to 280l/min 21MPa. econnecting a remote control valve to the vent port allows remote control of adjustment pressure.
Pressure Reducing (and heck) Valve eatures PRSSUR RU ( ) VV to 8l/min Pa -***-*- R -***-*- Specifications qthis valve is used when part of the circuit uses pressure that is lower than the main circuit.
More informationPart No (Low Changeover) Part No (High Changeover) Part No (High Changeover)
ELX-S TM UNIT 60% 665020 (Low Changeover) 305274 (High Changeover) 305305 (High Changeover) IMPORTANT: This catalog is published as an aid in identifying the detail parts that make up this complete device.
More informationFisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves
Instruction Manual D103319X012 Lever-Lock Handlever Actuator Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Contents Introduction................................. 1 Scope of Manual.........................
More informationNo March, Eaton. Gear Pumps. Parts Information. Model Multiple Gear Pumps B2 Series
Eaton Gear Pumps No. 6-628 March, 1993 Parts Information Model 25380 Multiple Gear Pumps B2 Series Pump Parts Drawing 13 50 1 25 12 11 5 9 8 17 16 3 6 15 45 28 49 9 8 17 16 48 29 26 Item 2 Backplate see
More informationCATALOGUE // The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification. Fort Vale Engineering Ltd. 2009
CATALOGUE // 20 19 18 16 17 The Fort Vale Range of Equipment to suit Hydrogen Peroxide Tank Specification 15 14 Fort Vale Engineering Ltd. 2009 THIS PAGE IS INTENTIONALLY BLANK HYDROGEN PEROXIDE EQUIPMENT
More informationPARTS CATALOG. MOBILE IBC SERVICES, LTD. 30 South 4 th Street Dennison, Ohio
2016 PRTS CTLOG MOILE IC SERVICES, LTD. 30 South 4 th Street Dennison, Ohio 44621 TOTEPRTS Mobile IC Services 3/1/2016 Page 1: Page 2: Page 3: Page 4: Page 5: Page 6: Page 7: Page 8: Page 9: Page 10: Page
More informationVG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators
VG Series VGG and VGD Gas Valves for use with SKP Electro-hydraulic Actuators Technical Instructions Document No. 155-51P5 VG August 1, 01 VGG VGD0 VGD0 Description Only when assembled to Series SKP actuators
More informationStandard Series Pipe Clamps Clamp Pair Selection
Standard Series Pipe lamps lamp Pair Selection Behringer s clamp pairs are available in different materials and incorporate a modular insert by group size. Standard series pipe clamps are available in
More informationEaton Vickers Vane Pump V and VQ series Cartridge Kits and Spare Parts
Eaton Vickers Vane Pump V and VQ series Cartridge Kits and Spare Parts www.hydpump.com - Complete single and double vane pumps - Cartridges kits and its spare parts - Single and double vane pump shafts
More informationMSC Guidelines for Refrigeration Machinery
Procedure Number E1-32 Revision Date: 07/27/10 S. J. Kelly, CDR, Chief of Engineering Division References: a. 46 CFR Part 56.50-105 Low Temperature Piping b. 46 CFR Part 58.20 Refrigeration Machinery c.
More informationHP10168 & HP10169 KITS HP10152 / HP10154 / HP10156
HP10168/&HP10154 HP10169/KITS HP10152 HP10156 HP10152: 2" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10154: 4" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10156: 6" AMP
More informationUCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)
SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient
More informationReplaces Ryan Sod Cutter Parts
Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationMetric Hose End Fittings to Braided AQP Hose
ack to HOME Metric Hose End Fittings to raided QP Hose T Inc. offers a comprehensive line of Metric to -N hose ends and adaptors. luminum hose ends attach easily to popular -N braided hose and fit directly
More informationTIE STALLS FEATURES RECTANGULAR POST RECTANGULAR CHANNEL POST ROUND POST
TIE STALLS TIE STALLS-1 FEATURES Designed to promote cow cleanliness and laying behavior. Versatile rectangular or channel posts have easy adjustable headrails. Stall is higher for increased cow comfort.
More informationSection: R100 Bulletin: R100.50A Date: 12/07 Supersedes: 08/06 THE STANDARD
Section: R100 Bulletin: R100.50A Date: 12/07 Supersedes: 08/06 THE STANDARD APPROVED APPROVED THE ELECTROLEV (PROBE) COLUMN CONNECTIONS Connections may be flanged, socket welded, butt welded or screw type.
More informationFoundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
More informationTIE STALLS FEATURES RECTANGULAR POST RECTANGULAR CHANNEL POST ROUND POST
TIE STALLS TIE STALLS-1 FEATURES Designed to promote cow cleanliness and laying behavior. Versatile rectangular or channel posts have easy adjustable headrails. Stall is higher for increased cow comfort.
More informationGEMO 1.3 SANITARY ISO2037
SANIARY ISO2037 51 UES AND FIINGS Catalog able of Contents page 53 66 ISO2037 FIINGS Introduction & Order Information ends 8009 S2WK.. 55 8010 SL2WS... 55 8011 S2WCL... 55 8012 SL2WS... 56 ees 8013 S7W...
More informationSae 4 Bolt Flange Port Dimensions
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with sae 4 bolt flange port
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationSafe-T-Stopper. Gas-Free* Service Tee Renewal and Removal for CenterPoint Energy. *In a controlled gas environment
Safe-T-Stopper Gas-Free* Service Tee Renewal and Removal for CenterPoint Energy *In a controlled gas environment 1 Presentation Goals What is the Safe-T-Stopper? What are the tool s benefits? What is the
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationCopyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written
MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationType OS2 Slam-Shut Device
Instruction Manual D102778X012 Type OS2 April 2018 Type OS2 Slam-Shut Device! Warning Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion
More informationDistributor Catalog 2. Quick Connect 0.2 mm slot. Metric Connection. Wave Cyber ( Shanghai ) Co., Ltd.
Distributor Catalog 2 Quick Connect 0.2 mm slot Metric Connection www.wave-cyber.com Wave Cyber ( Shanghai ) Co., Ltd. TOP MOUNT 6 LATERAL (Φ35MM) DISTRIBUTOR (2 ~ 2 TANKS) QUICK CONNECTION ITEM PART DESCRIPTION
More informationLIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)
LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
More informationFloat Operated Level Controllers
CONTENTS Float Operated Level Controllers IM0015 Nov. 2014 PAGE Introduction 1 Scope 1 Description 1 Specification 1 Control Installation 2 INTRODUCTION Side Mount Back Mount Prior to installing, the instructions
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationLV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE
More informationStraightaway 130. Sliding & Folding Door Systems. Product Overview. Features. Technical Specifications. Coburn Product Data Sheet
Sliding & Folding Door Systems Coburn Product Data Sheet Straightaway 0 Sliding & Folding Door Systems Product Overview The Straightaway 0 is a quiet and dependable system designed for interior and exterior
More informationK Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationPibiviesse High Performance Control Ball Valve
Pibiviesse High Performance Control Ball Valve Sizes 2 to 48 Pressure rating up to ANSI 2500# Anti-cavitation and low noise trim available High turndown High rangeability Unique self-cleaning effect Single
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More informationPilot valves for pilot operated servo valves
Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)
More informationBollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt
More informationNorth American 8773 Braided Flexible Connections
Combustion North American 8773 Braided Flexible Connections Bulletin 8773 8773 Flexible braided hoses for gas, oil, steam, compressed air and oxygen service are ideal for applications requiring a high
More informationCENTRIFUGAL COMPRESSORS
CENTRIFUGAL COMPRESSORS RENEWAL PARTS Supersedes: 60.49-RP2 (27) Form 60.49-RP2 (37) COMPRESSOR MODEL YDHA-36 and LHA-36 YDHA-4 and LHA-4 YDHA-46 and LHA-46 YPHA-50N and LHA-50N YDHA-50W and LHA-50W HA-57,
More informationOpening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º
17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000
More informationBulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves
Service Bulletin Series PR25MA, PR25P, PR25S, PR32P, PR32S Effective: July 1, 1995 Pilot Operated Pressure Reducing Valves WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationOperation and Maintenance Manual for the Bell Gas Management Panel. Part Number: A46983AA. Document Number: P1836-OM-296 Revision: 3
Operation and Maintenance Manual for the Bell Gas Management Panel Part Number: A46983AA Document Number: P1836-OM-296 Revision: 3 (Intentionally Blank) APPROVAL SHEET Document Information Manual No Advitium
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationSBU 220. Spare parts list. Hydraulic breakers. SBU 220 s/n BES Construction Tools PC AB No
SBU 220 Spare parts list Hydraulic breakers SBU 220 s/n BES090753 2018 Construction Tools PC AB No. 9800097101 2018-01 General information This spare parts list applies to the following: Part number Description
More information