CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

Size: px
Start display at page:

Download "CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint"

Transcription

1 Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8, R1/, R3/8, R1/2) Series 6000 super-rapid fittings have been designed with a special collet which provides an homogeneous tight on the whole surface of plastic tubes, thus ensuring high reliability and a long service life, also after connections and disconnections of the tube are repeated several times. The wide range of these fittings includes many types of threads: metric, BSP and BSPT. Sprint models are characterized by great reliability of female threads, both BSP and BSPT, with non-flat surfaces. This is possible thanks to a Teflon ring on the male thread, which guarantees a perfect seal between the two threads. GENERAL DATA Fitting with connecting tube Material body and collet: nickel-plated brass; O-Ring: NBR; thread seal: PTFE - NBR - PA Threads series 6000 Micro: M3 - M5 - M7 - G1/8 - G1/ series 6000: GAS conical ISO 7 (BSPT) GAS cylindrical ISO 228 (BSP) M5-M6 and other metric threads available on request NPT on request Pressure Tube to connect Diameters Fluid Temperature min -0,9 bar - max 16 bar (see tubing) Rilsan, PA , polyethylene, PU, Hytrel Polyester series 6000 Micro: ø mm series 6000: ø mm compressed air (for other types of fluid, contact our engineers) series 6000 Micro: -10 C 80 C (see data for tubing used) series 6000: -20 C 80 C (see data for tubing used) /

2 Fittings Mod. S6510 Male Connector Sprint Mod. A D C F G H L SW SW1 Weight (g) S6510-1/8 G1/8 3,8 8,8 13,2 5, ,5 9 S6510-1/ G1/ 5,5 8,8 15,2 7 19,5 1 2,5 15 S /8 5 G1/8 3,8 9,8 13,2 5, S / 5 G1/ 5,5 9,8 15, S /8 6 G1/8 6 11,7 13,2 5, S / 6 G1/ 5,5 11,7 15, S /8 6 G3/8 6,5 11,7 20,5 8 22, S /8 8 G1/8 7,5 13,7 15,2 5, S / 8 G1/ 6,5 13,7 15, S /8 8 G3/8 6 13,7 20,5 8 23, S /2 8 G1/2 7,5 13,7 2, S / 10 G1/ 8,3 15, 18,5 7 28, S /8 10 G3/8 5,3 15, 20,5 8 25, S /2 10 G1/2,8 15, 2, S / 12 G1/ 10,3 18,3 20,5 7 29, S /8 12 G3/8 9,3 18,3 20,5 8 28, S /2 12 G1/2 5,8 18,3 2, S /8 1 G3/8 10,3 20,5 2,5 8 30, S /2 1 G1/2 6,3 20,5 2,5 9 26, S /2 16 G1/2 9 23,5 26, S / 16 G3/ 3,5 23,5 27,3 9 26,5 2-6 Fittings Mod Micro Metric-BSP Male Connector Mod. A D F H L SW1 Weight (g) M3 3 M3 5,8 2,5 10,2 1, M5 3 M5 5,8 3, M7-M M7 9, 5 17,5 2, /8-M G1/8 11, , M7-M 6 M7 10, /8-M 6 G1/8 11, /8-M 8 G1/8 12, 5 18, /-M 10 G1/ 1, = with gasket = with O-Ring /

3 Fittings Mod Metric-BSP Male Connector Mod. A D C F G H L SW SW1 Weight (g) M5 M5 6 7,8 8, M6 M6 6,5 8,8 9,9,5 20,5 9 2, /8 G1/8 5 8,8 13, , / G1/ 6,5 8,8 16, 7 20,5 15 2, M5 5 M5 6 8,8 9, M5 6 M5 6 11,7 13, /8 6 G1/8 5 11,7 13, / 6 G1/ 6 11,7 16, /8 8 G1/8 8,5 13,7 15, / 8 G1/ 7 13,7 16, 7 2, /8 8 G3/8 6,5 13,7 20, / 10 G1/ 9,8 15, 18, /8 10 G3/8 5,3 15, 20,5 7 2, / 12 G1/ 10,5 18,3 20,5 7 29, /8 12 G3/8 5,8 18,3 20, Fittings Mod. 663 Metric-BSP Female Connector Mod. A D C F G L SW Weight (g) 663 -M5 M5 6,5 7,8 8,8 20, /8 G1/ /8 5 G1/8 10 9, /8 6 G1/ , / 6 G1/ 11,5 11,9 16,5 27, /8 8 G1/8 9,5 13,7 15, / 8 G1/ 11,5 13,7 16, / 10 G1/ 11,3 15, 18,5 31, /

4 Fittings Mod. S6520 Swivel Male Elbow Sprint Mod. A D C E F H M SW SW1 Weight (g) S6520-1/8 G1/8 3,5 1,5 9 5,5 17, S6520-1/ G1/ 3,5 1, , S /8 5 G1/8 5,5 1,5 10 5,5 20, S / 5 G1/ 5,5 1, , S /8 6 G1/ ,7 5, S / 6 G1/ 15 12, S /8 6 G3/8 15,5 12, S /8 8 G1/ ,2 5,5 22, S / 8 G1/ ,2 7 22, S /8 8 G3/8 5 16,5 1,2 8 22, S /2 8 G1/ ,2 9 22, S / 10 G1/ 5,8 18,5 16, S /8 10 G3/8 5, , S /2 10 G1/2 5,8 19,5 16, S / 12 G1/ 7, ,5 7 26, S /8 12 G3/8 7, ,5 8 26, S /2 12 G1/2 7,3 20,5 19,5 9 26, S /8 1 G3/8 8, ,5 8 28, S /2 1 G1/2 8,3 21,5 21,5 9 28, Fittings Mod Micro Metric Swivel Male Elbow Mod. A D E H M SW SW1 Weight (g) M3 3 M3 13,7 2,5 13, M5 3 M5 13,7 3,5 13, = with gasket = with O-Ring /1.05.0

5 Fittings Mod Metric-BSP Swivel Male Elbow Mod. A D C E F H M SW SW1 Weight (g) M5 M5 3,5 12,5 9 17, /8 G1/8 3,5 1, , / G1/ 3,5 15, , M5 5 M5 5,5 12, , M5 6 M , /8 6 G1/ , / 6 G1/ 16 12, /8 8 G1/ ,2 6 22, / 8 G1/ ,2 7 22, /8 8 G3/ ,2 7 22, / 10 G1/ 5,8 19,5 16, /8 10 G3/8 5,8 19,5 16, / 12 G1/ 7, ,5 7 26, /8 12 G3/8 7,3 20,5 19,5 7 26, Fittings Mod. S6500 Metric Fix Male Elbow Mod. A D C E F H M SW Weight (g) S6500-1/8 R1/8 3,5 8,5 9 7,5 17,5 8 9 S6500-1/ R1/ 5 11, S /8 5 R1/8 5,5 8,5 10 7,5 20, S / 5 R1/ 5,5 11, , S /8 6 R1/8 9 12,7 7, S / 6 R1/ 11,5 12, S /8 8 R1/8 5 10,5 1,2 6,5 22, S / 8 R1/ 5 11,5 1,2 12,5 22, S /8 8 R3/ ,2 11,5 2, S / 10 R1/ 5, ,5 11, S /8 10 R3/8 5, , S / 12 R1/ 7,3 1,5 19, , S /8 12 R3/8 7,3 13,5 19,5 11,5 26, /

6 Fittings Mod Long Swivel Male Elbow Sprint Mod. A D C E F H M SW SW1 Weight (g) /8 6 G1/8 33,8 12,7 5, / 6 G1/ 3 12, /8 8 G1/8 5 3,8 1,2 5,5 22, / 8 G1/ ,2 7 22, Fittings Mod Micro Complete Metric Adjustable Single Banjo Mod. A B C F H L S W SW Weight (g) M3 3 M3 5,8 1,2 2,5 9,3 3,5 6 1, M5 3 M5 6,5 16 3,2 11,9, Fitting Mod M5 Metric Fix Male Elbow Mod. A D C E F H M SW Weight (g) M5 M5 3, , /

7 Fittings Mod. S630 Swivel Male Tee Sprint Mod. A D C E F H L SW SW1 Weight (g) S630-1/8 G1/8 3,5 1,5 9 5, S /8 5 G1/8 5,5 1,5 10 5, S / 5 G1/ 5,5 1, S /8 6 G1/ ,7 5, S / 6 G1/ 15 12, S /8 8 G1/ ,2 5, S / 8 G1/ , S /8 8 G3/8 5 16,5 1, S / 10 G1/ 5,8 18,5 16, S /8 10 G3/8 5, , S /2 10 G1/2 5,8 19,5 16, S / 12 G1/ 7, , S /8 12 G3/8 7, , S /2 12 G1/2 7,3 20,5 19, S /2 1 G1/2 8,3 21,5 21, Fittings Mod. 632 Micro Metric Swivel Male Tee Mod. A D E H L SW SW1 Weight (g) M3 3 M3 13,7 2,5 21, M5 3 M5 13,7 3,5 21, / = with gasket = with O-Ring

8 Fittings Mod. 632 Metric-BSP Swivel Male Tee Mod. A D C E F H L SW SW1 Weight (g)) 632 -M5 M5 3,5 12, /8 G1/8 3,5 1, M5 5 M5 5,5 12, /8 6 G1/ , / 6 G1/ 16 12, /8 8 G1/ , / 8 G1/ , /8 8 G3/ , / 10 G1/ 5,8 19,5 16, /8 10 G3/8 5,8 19,5 16, / 12 G1/ 7, , /8 12 G3/8 7,3 20,5 19, Fittings Mod. S60 Lateral Swivel Male Tee Sprint Mod. A D C E F H L M SW SW1 Weight (g) S60-1/8 G1/8 3,5 1,5 9 5,5 37,5 17, S60 5-1/8 5 G1/8 5,5 1,5 10 5,5 0,5 20, S60 6-1/8 6 G1/ ,7 5,5 0, S60 6-1/ 6 G1/ 15 12, S60 8-1/8 8 G1/ ,2 5,5 22, S60 8-1/ 8 G1/ ,2 7 5,5 22, S60 8-3/8 8 G3/8 5 16,5 1, , S / 10 G1/ 5,8 18,5 16,5 7 51, S /8 10 G3/8 5,8 18,5 16, S /8 12 G3/8 7,3 19,5 19,5 8 5,5 26, S60 1-1/2 1 G1/2 8,3 21,5 21, , /

9 Fittings Mod. 62 Micro Lateral Metric Swivel Male Tee Mod. A D E H L M SW SW1 Weight (g) 62 3-M3 3 M3 10,7 2,5 21, 13, M5 3 M5 12,2 3,5 21, 13, = with gasket = with O-Ring Fittings Mod. 62 Lateral Metric-BSP Swivel Male Tee Mod. A D C E F H L M SW SW1 Weight (g) 62 -M5 M5 3,5 12, , /8 G1/8 3,5 1, , M5 5 M5 5,5 12, ,5 20, /8 6 G1/ , / 6 G1/ 16 12, /8 8 G1/ ,2 6,5 22, / 8 G1/ ,2 7 6,5 22, /8 8 G3/ ,2 7 6,5 22, / 10 G1/ 5,8 19,5 16,5 7 52, /8 10 G3/8 5,8 19,5 16,5 7 52, / 12 G1/ 7, ,5 7 53,5 26, /8 12 G3/8 7,3 20,5 19, , /

10 Fittings Mod. 652 Micro Metric Swivel Male Y Mod. A D F H L M SW SW1 Weight (g) M3 3 M3 12 2,5 20, M5 3 M5 12 3,5 20, = with gasket = with O-Ring Fittings Mod S650 Mod. 651: Metric Adjustable Male Y Mod. S650: Swivel Male Y Sprint Mod. A D F H L M SW Weight (g) 651 -M5 M , M5 6 M5 2,5 29,5 12,5-27 S650-1/8 G1/8 18 5, S /8 6 G1/8 2,5 5,5 1,5 12, S /8 8 G1/8 28,5 5,5 8,5 1,5 1 8 S / 8 G1/ 28, , Fittings Mod Complete BSP Swivel Single Banjo * Complete Metric Swivel Single Banjo * = not swivel Model with gasket Mod. A B C E F H L M SW W Weight (g) Notes M5 M5 5,7 8,8 15,8 18 2,5 Ø 8 10 * /8 G1/8 7,5 10, ,5 Ø /8 6 G1/8 8 10,2 12, Ø / 6 G1/ 10 9,1 12,7 6 25, Ø /8 8 G1/8 8 10,2 1, ,5 Ø / 8 G1/ 10 9,1 1,2 6 25,3 27,5 5 Ø / 10 G1/ 8,8 9,1 16,5 6 25, Ø 18 2 /

11 Fittings Mod Complete BSP Swivel Double Banjo Mod. A B C E F H L M W SW Weight (g) /8 G1/8 7,5 10, Ø /8 6 G1/8 8 10,2 12, Ø / 6 G1/ 10 9,1 12,7 6 25,3 52 Ø /8 8 G1/8 8 10,2 1, Ø / 8 G1/ 10 9,1 1,2 6 25,3 55 Ø / 10 G1/ 8,8 9,1 16,5 6 25,3 58 Ø Fittings Mod assembled with Mod. 1631, 1635 Double Banjo Mod. A C F L O V W Weight (g) M ,1 Ø /8 7, ,5 9,8 Ø / ,7 8 1,5 9,8 Ø / ,7 52 1,5 13,2 Ø / ,2 51 1,5 9,8 Ø / ,2 55 1,5 13,2 Ø 18 3 Fittings Mod with gaskets = Single Banjo Stem = Double Banjo Stem = Triple Banjo Stem Mod / Drawings and dimensions on page /

12 Fittings Mod assembled with Mod. 1631, 1635 Single Banjo Mod. A C F M O V W Weight (g) M ,1 Ø M ,1 Ø /8 7,5 9 21,5 1,5 9,8 Ø M ,1 Ø M ,1 Ø / ,5 9,8 Ø M5 6 6,5 12,7 22,5 9 5,1 Ø M6 6 6,5 12,7 22,5 9 5,1 Ø / ,7 2 1,5 9,8 Ø / ,7 26 1,5 13,2 Ø / ,2 25,5 1,5 9,8 Ø / ,2 27,5 1,5 13,2 Ø / ,2 28,5 1,5 16,7 Ø / 10 8,8 16,5 29 1,5 13,2 Ø * / ,3 16,5 30,5 1,5 16,7 Ø * / ,8 16,5 32 1,5 21 Ø * = assembly required with Mod. SCU, SVU, SCO... M5 only * = assembly required with Mod only Fittings Mod Metric Male Adaptor Sprint Mod. G D H T L SW Weight (g) M5 M5 16,5 2,5 8 3 * /8 G1/8 5,5 16,5 27, /8 5 G1/8 5, , / 5 G1/ /8 6 G1/8 5, , / 6 G1/ /8 8 G1/8 5,5 20,5 31, / 8 G1/ 7 20,5 33, / 10 G1/ /8 10 G3/ , /8 12 G3/ , /2 1 G1/ * = with O-Ring /

13 Fittings Mod. S Male Elbow Sprint Mod. A D E F H L M SW SW1 Weight (g) S /8 6 G1/8 1 12,7 5,5 32,5 20, S / 6 G1/ 1 12,7 7 3,5 20, S /8 8 G1/8 1 1,2 5,5 32,5 22, S / 8 G1/ 1 1,2 7 3,5 22, S /8 8 G3/8 1,5 1, , S / 10 G1/ 15,5 16,5 7 39,5 26, S /8 10 G3/8 15,5 16,5 8 39,5 26, S /2 10 G1/ , , S / 12 G1/ 15,5 19,5 7 0,5 26, S /8 12 G3/8 15,5 19,5 8 0,5 26, S /2 12 G1/ , , Fittings Mod Micro Bulkhead Connector Mod. A B F L MAX T Weight (g) M7x0,75 5,8 18, 5 11, /

14 Fittings Mod Bulkhead Connector Mod. A B F L N MAX SW SW1 T Weight (g) 6590 M10x1 8, , M12x1 9, , M1x1 12, , M16x1 1, ,5 11, M18x1 16,3 1,5 20, , M20x1 18,8 39,5 19,2 1, M22x1 20,5 1,5 20,2 17, Fittings Mod Micro Union Connector Mod. A G L S Weight (g) ,8 19,9 2,2 2 Fittings Mod Union Connector Mod. A F G L N S S1 S2 Weight (g) , ,2 1, , ,2 1, , ,2 1, , ,5 5 2,2 1, , 17 1,5 20,2 5 2,2 1, , ,5 19,2 5,2 2,2 1, ,5 21 1,5 20,2 5,2 2,2 1,6 7 /1.05.1

15 Fittings Mod Reducer Union Connector Mod. A B F G L M N Weight (g) , , , , , Fittings Mod BSP Female Bulkhead Mod. A D E F G H L K (max) K (min) SW SW1 Weight (g) /8 6 G1/8 10 M12x1 16, 6 2,5 8, / 6 G1/ 11,5 M12x1 18, , /8 8 G1/8 10 M15x1 18, , / 8 G1/ 11,5 M15x1 18,5 7 28,5 9, /8 10 G3/8 12,8 M18x1 2,5 8 32, Fittings Mod Micro Elbow connector Mod. A M SW Weight (g) ,7 6 3 /

16 Fittings Mod Elbow connector Mod. A C F M SW Weight (g) ,5 9 17, , , , ,2 22, ,8 16, ,3 19,5 26, ,3 21,5 28, Fittings Mod. 650 Micro Tee Connector Mod. A L M SW Weight (g) , 13,7 6 Fittings Mod. 650 Tee Connector Mod. A C F L M SW Weight (g) 650 3, , , , , ,2 5 22, ,8 16, ,3 19, , ,3 21, , /

17 Fittings Mod Cross Junction Mod. A F L M SW Weight (g) , , ,2 9 2, , , , Fittings Mod Micro Y Union Mod. A F L M SW Weight (g) , Fittings Mod Y Union Mod. A C F L M Weight (g) , , ,5 1, , , /

18 Fittings Mod Micro Cartridge Mod. A B F G H L S Weight (g) ,9 6,2 6,3 9,2 6 1 Fittings Mod Cartridge Mod. A B D DE F G H H2 L S* P min (Kg) P max (Kg) Weight (g) ,5 8,8 1 8, ,1 1,5 8, ,5 9,8 15 9, ,5 3,1 15,5 9, ,8 12,2 12 3,6 16,5 11, ,8 1,2 1 3, , ,8 16,2 16,5 3,1 20,5 15, S* = metallic ( ) or synthetic seat ( ,02) Fittings Mod Female Plug Mod. A G L Weight (g) , , ,8 18, , , Fittings Mod Enlarger Junction Mod. A G C F L T Weight (g) ,5 12,7 33,5 16, , /

19 Fitting Mod Micro Reducer Junction Mod. A F G L T Weight (g) , ,5 2 Fittings Mod Reducer Junction Mod. A G C F L T Weight (g) ,5 9 29, , , ,7 3 20, ,5 12,7 36, ,5 12,7 33, , , ,3 16,5 0, ,3 16,5, ,3 18,8 5, /

20 Fittings Mod Junction Mod. G L Weight (g) , , , Fittings Mod Junction Elbow Mod. A G C L F T M SW Weight (g) , ,5 17, ,5 12, ,5 1, , , , Fittings Mod Protection caps Colour: Black Self-extinguishing material, class V0 Mod. A F L Weight (g) ,7 10, , ,7 11, ,7 12, , , , /

21 Accessory Mod Micro Plastic Male Plug Mod. G L P T Weight (g) ,5 6 13,5 1 Accessory Mod Plastic Male Plug Mod. G L P T Weight (g) ,5 8 20, ,5 8 22, ,5 12 2, , , , ,5 3 Accessory Mod. SP Disconnecting tube set The set includes keys to disconnect tubes with diameters between and 12 mm. Mod. SP /

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

screw fittings - nickel plated brass series SC

screw fittings - nickel plated brass series SC screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical

More information

Prestolok PLM Metal Push-to-Connect Fittings

Prestolok PLM Metal Push-to-Connect Fittings Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.

57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2. 57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200

More information

Flow control valves Series RFU - RFO 2/

Flow control valves Series RFU - RFO 2/ CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5

More information

Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver

Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver Flow control valves Unidirectional and bidirectional (meter-in, meter-out, orifice) banjo flow controllers Series SCU, MCU, SVU, MVU, SCO, MCO Ports M5, 1/8, 1/4, 3/8, 1/2 BSPP (without adapters) General

More information

DN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve

DN 1/2 to 2 Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials

More information

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.

Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L. Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18

More information

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

DN 3/8" to 4" Female BSP - 10 C C Max Pressure : 16 Bars up to DN 2 Specifications : Removable stainless steel filter Female / Female

DN 3/8 to 4 Female BSP - 10 C C Max Pressure : 16 Bars up to DN 2 Specifications : Removable stainless steel filter Female / Female Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP - 10 C + 120 C Max Pressure : 16 Bars up to DN 2 Specifications : Removable stainless steel filter Female / Female Materials :

More information

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g

patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE a n d ot h e r p e n di n g SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

Water Fittings & Hose

Water Fittings & Hose Connector Plugs A d1 d R H Male Type Brass Part R Di H A Number Series BSPT CM251 1/8 9 17 22 25 200 CM252 Series 1/4 9 19 26 29 1/4 Flow CM253 3/8 9 19 30 30 CM351 1/8 13 25 26 35 CM352* 300 1/4 13 25

More information

THREAD/SCREW - Drill & Tap Chart

THREAD/SCREW - Drill & Tap Chart Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials

More information

Materials : Forged carbon steel A105N

Materials : Forged carbon steel A105N Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining

More information

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2 ISO G and ISO R Thread Options Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes

More information

Materials : Stainless steel ASTM A351 CF8M

Materials : Stainless steel ASTM A351 CF8M Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 3/4" Male, hose coupling - 10 C + 150 C Max Pressure : 16 Bars Specifications : Anti blow-out stem Locking device With hose coupling Materials

More information

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New > Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

More information

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006

Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006 Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055

More information

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/

COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/ COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1

More information

AVP-F. p setting range (bar) Code No. 003H6200

AVP-F. p setting range (bar) Code No. 003H6200 Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator

More information

DN 1/2" to 2 Female - Female BSP - 20 C C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore

DN 1/2 to 2 Female - Female BSP - 20 C C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Female - Female BSP - 20 C + 180 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Materials

More information

Parker Legris Machine Safety: Product Sheets

Parker Legris Machine Safety: Product Sheets Parker Legris Machine Safety: s Blocking Fittings Blocking fittings include a pneumatic monostable 2/2 normally closed (N) function. These fittings are directly installed onto the pneumatic cylinder supply

More information

BIMBAR INFLATABLE PACKERS AND ACCESSORIES

BIMBAR INFLATABLE PACKERS AND ACCESSORIES BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced

More information

DN 1/2" to 2" Female / Female BSP - 5 C + 60 C Max Pressure : 5 Bars Specifications : Anti blow-out stem Double o ring NBR on stem Full bore

DN 1/2 to 2 Female / Female BSP - 5 C + 60 C Max Pressure : 5 Bars Specifications : Anti blow-out stem Double o ring NBR on stem Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female / Female BSP - 5 C + 60 C Max Pressure : 5 Bars Specifications : Anti blow-out stem Double o ring NBR on stem Full bore Materials

More information

F l o w c o n T R o l v a l v E S

F l o w c o n T R o l v a l v E S Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,

More information

Push-in fittings QB, NPT

Push-in fittings QB, NPT General technical data Connecting thread UNF NPT Size Standard Design Push-pull principle Mounting position An Tpe of seal on threaded plug Sealing ring Coating Operating and environmental conditions Operating

More information

Piloted Non-Return Valves

Piloted Non-Return Valves ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product

More information

Beamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL

Beamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG PRESSURE GENERATORS 97 Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG pressure generators are portable hand-operated pressure generators and ultimate field calibration pumps 98 Calibration pumps

More information

CI-SfB 732 (5-1) x. - laboratory fittings

CI-SfB 732 (5-1) x. - laboratory fittings CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves

More information

BTV. Internally threaded 2-way control valve. Flow characteristics. Function

BTV. Internally threaded 2-way control valve. Flow characteristics. Function Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and

More information

Propor tional Re lief Valve s

Propor tional Re lief Valve s www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves

More information

DN 1/4" to 3" Female BSP - 10 C C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore

DN 1/4 to 3 Female BSP - 10 C C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 3" Female BSP - 10 C + 120 C Max Pressure : 25 Bars ( up to DN 1 ) Specifications : Anti blow-out stem With PTFE packing Full bore Materials

More information

Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting

Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.

More information

Prestolok PLS Stainless Steel Push-to-Connect Fittings

Prestolok PLS Stainless Steel Push-to-Connect Fittings Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance

More information

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Flow Control Valves NORTH MERICN FITTINGS & FLOW CONTROL VLVE CTLOG > Release 8.6 Nickel-Plated Brass Right ngle Flow Control Valves /Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel esign : Meter-Out,

More information

CAST IRON VALVES FLOAT VALVE

CAST IRON VALVES FLOAT VALVE CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm

More information

Series KJ. Miniature One-touch Fittings. Applicable Tube

Series KJ. Miniature One-touch Fittings. Applicable Tube Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing,

More information

SIMPLAIR PIPING TOOL. JXT Company

SIMPLAIR PIPING TOOL. JXT Company SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

Pressure Equalising Valves Model , for Differential Pressure Gauges

Pressure Equalising Valves Model , for Differential Pressure Gauges Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to

More information

TOTALINE BRASS FITTINGS

TOTALINE BRASS FITTINGS LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50

More information

Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting

Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in

More information

Expansion Thermometers Stainless Steel Series, Model 70

Expansion Thermometers Stainless Steel Series, Model 70 Mechanical Temperature Measurement Expansion Thermometers Stainless Steel Series, Model 70 WIKA Data Sheet TM 81.01 Applications General-purpose temperature measuring instruments for gaseous, liquid and

More information

Pressure reducing valves Index

Pressure reducing valves Index Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel

More information

Product Range. Product Range

Product Range. Product Range Product Range Product Range EXCELLENT SOLUTIONS FOR COMPRESSED AIR With more than 30 years experience in pneumatic field, Aignep is an Italian leading manufacturer of compressed air elements. Aignep is

More information

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw. Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces

More information

High Pressure Cylinder Valves

High Pressure Cylinder Valves High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series

More information

Technical Information Ball valves for high pressure applications

Technical Information Ball valves for high pressure applications Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be

More information

INSERT FITTINGS INSERT FITTINGS

INSERT FITTINGS INSERT FITTINGS Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4

More information

Spectrotec. Pressure regulators for acetylene

Spectrotec. Pressure regulators for acetylene spectro tec Spectrotec Pressure regulators Regulator BT61 ca. 166 1/8"-NPT 83 113 48 1/4"-NPT 60 1/4"-NPT 33 105 Pressure regulator BT61 AC Specially For flow rates up to 8 m³/h acetylene Pressure regulator

More information

FULL FLOW GAS BALL VALVES: LONDON EN 331 APPROVED. GAS BALL VALVES

FULL FLOW GAS BALL VALVES: LONDON EN 331 APPROVED. GAS BALL VALVES FULL FLOW GAS BALL VALVES: EN 331 APPROVED. GAS BALL VALVES 066 BALL VALVE, FULL FLOW SIZE PRESSURE CODE PACKING 1/4" (DN 8) 5bar/72,5psi 066B014 12/192 3/8" (DN ) 5bar/72,5psi 066B038 12/192 1/2" (DN

More information

Push-in fittings CRQS, stainless steel

Push-in fittings CRQS, stainless steel Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and

More information

World Area Differences Technical Information

World Area Differences Technical Information World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8

More information

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges

F Fittings with 24 cone as per DIN EN ISO Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Fittings with 24 cone as per DIN EN ISO 8434-1 Fitting accessories, plug-type connectors, hydraulic pipes, pipe clamps, pressure gauges Issue 8-17 E F 9.300 Advantages NNWorldwide spread high-pressure

More information

prevo.g COMPRESSED AIR QUICK COUPLING offers the following advantages: Light Heavy duty User friendly Compatible with mm profile couplings.

prevo.g COMPRESSED AIR QUICK COUPLING offers the following advantages: Light Heavy duty User friendly Compatible with mm profile couplings. prevo.g COMPRESSED AIR QUICK COUPLING Prevo.G compressed air quick coupling offers the following advantages: Light Heavy duty User friendly Compatible with 7.2-7.4 mm profile couplings. Due to its material

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

Underground irrigation

Underground irrigation Prograers Turbines and Pop-ups Solenoid valves ittings Accessories and Hoses 70 Irrigation located in set areas, and the only time that you need to invest into it, is the time it takes to set it up, then

More information

R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids

R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet

More information

Hydraulic hand test pump Models CPP700-H and CPP1000-H

Hydraulic hand test pump Models CPP700-H and CPP1000-H Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory

More information

LEAK TROUBLESHOOTING

LEAK TROUBLESHOOTING LEAK TROUBLESHOOTING If you suspect that your TMC isolation system is leaking (most often evidenced by going through air/nitrogen tanks too quickly), this guide will help you to find and fix the problem.

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and

More information

YORKEX HARD KUTERLON PLASTIC COATED. Wall 10mtr 25mtr

YORKEX HARD KUTERLON PLASTIC COATED. Wall 10mtr 25mtr YORKSHIRE COPPER TUBE BS EN1057 YORKEX H/HARD YORKEX CHROME YORKEX HARD (T/X) PLATED O/D Press O/D Press O/D Press Wall Stock Lth 65C Wall Stock Lth 65C Wall Stock Lth 65C MM 3mtr 6mtr Bar MM 3mtr 6mtr

More information

GENERAL CATALOGUE 2O16

GENERAL CATALOGUE 2O16 GENERAL CATALOGUE 2O16 LABORATORY TAPS INDEX TECHNICAL INFORMATION PAGES DRY SERVICE CONTROLS PAGES PRESENTATION TECHNICAL INFORMATION DESIGN AND MANUFACTURING 1 2-3 4 BENCH MOUNTED WALL MOUNTED PENDANT

More information

Push-in fittings NPQH

Push-in fittings NPQH Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard

More information

Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L

Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L Calibration Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L WIKA data sheet CT 91.05 for further approvals see page 2 Applications Calibration service companies and service industry Calibrations

More information

FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:

FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to: LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are

More information

MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET

MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN

More information

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing

Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs

More information

GUKO FDA. einfach. gut. beraten.

GUKO FDA. einfach. gut. beraten. GUKO FDA Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-25 C + 90 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noise Linear and angular compansion Inner

More information

KOMPLETNÍ PNEUMATICKÉ ROZVODY

KOMPLETNÍ PNEUMATICKÉ ROZVODY KOMPLETNÍ PNEUMATICKÉ ROZVODY KOPR s.r.o. Kněžmost Sokolská 170 294 02 Kněžmost PRICE LIST BRASS QUICK FITTINGS RAP 7 2009 WE OFFER : - quantity discounts - other parts made to customer specifications

More information

VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)

VBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32) VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to

More information

Proportional Relief Valves

Proportional Relief Valves www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves

More information

Push-In Fitting Type with Stop Valve

Push-In Fitting Type with Stop Valve http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

Cable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories

Cable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into

More information

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)

FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel) // FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator

More information

Metric Hose End Fittings to Braided AQP Hose

Metric Hose End Fittings to Braided AQP Hose ack to HOME Metric Hose End Fittings to raided QP Hose T Inc. offers a comprehensive line of Metric to -N hose ends and adaptors. luminum hose ends attach easily to popular -N braided hose and fit directly

More information

ptfe and stainless steel hoses

ptfe and stainless steel hoses ptfe and stainless steel hoses 3 table of contents Description P.004 Description of FX01 hoses P.004 Description of FX02 hoses P.004 Description of FX03 hoses P.005 Description of FX06 hoses P.005 DESCRIPTION

More information

Cost effective. Smooth. Reliable. LOG Internal Hole Gripper

Cost effective. Smooth. Reliable. LOG Internal Hole Gripper LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications

More information

R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid

R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder

More information

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS FILTER REGULATORS MODEL NO: CAT155 & CAT156 PART NO: 3120169 & 3120170 FITTING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0117 INTRODUCTION Thank you for purchasing this CLARKE Filter/Regulator.

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

AKIT1901LM (Metal levers) AKIT1901XM (Cross Handles)

AKIT1901LM (Metal levers) AKIT1901XM (Cross Handles) PALLADIAN EXPOSED TUB SET WITH HANDSHOWER AKIT1901LM (Metal levers) AKIT1901XM (Cross Handles) COLORS/FINISHES WARRANTY FEATURES Palladian metal levers or cross handles Floor mounted exposed two handle

More information

Push-in fittings NPQH

Push-in fittings NPQH Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard

More information

New, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!

New, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job! MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted

More information

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN Data sheet Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN 40-100 Description AB-PM is ideal for staged installation and commissioning AB-PM is a combined

More information

Overview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)

Overview of types.   T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2) Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an

More information

Serie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection

Serie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection Flanged back flow preventer with controllable reduced pressure zone made in Application fields WATER FIRE FIGHTING DRINKING WATER 64 www.brandoni.it The ECO 3F flanged backflow preventers, which have a

More information