There is virtually nothing you can do to a boat that we can not repair as good or better than new!
|
|
- Prosper Warren
- 6 years ago
- Views:
Transcription
1 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
2 Does not look too bad from 50
3 The worst of it cut out
4 Guide coat blocked down and waiting for gel
5 Starting to shape the glass
6 Some more sanding and buffing to do
7 Stripped and ready to start on the deck
8 New carpet & recessed pan
9 Spraying one of the colors
10 Time to start reassembling everything
11 New cowling graphics
12 New seats by Quality Manufacturing Plus
13 Polished jack plate
14 Trailer was rock chipped all over
15 Looks good now
16 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
17 A couple of jet skis got a little close
18 New glass almost ready to shape
19 Painted and ready to reinstall rubrail
20 This boat was rear ended in traffic
21 What is left of the engine. The rest of it was laying on the back deck
22 As good if not better than new! Just waiting on the new decals to come in
23 Ready to go!
24 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
25 A Triton in for refurbishing
26 Sanded and getting ready for new flake
27 The trailer also needed refurbishing
28 New carpet getting installed
29 Trailer is done, now where is the boat
30 Out of detail and almost ready to go!
31 Another boat ready to go
32 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
33 This trailer came in for refurbishing
34 It needed repainting, bunks, etc
35 Painted and striped
36 Waiting for the paint to cure for reassembly
37 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
38 A Bullet 21 XRD in for refurbishing
39 Removed the deck for a new transom
40 Transom in and bilge area painted
41 Almost ready to repaint the accent stripes...
42 Ready for the new carpet, seats, etc
43 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
44
45 Taking off layers of paint & gelcoat
46 Gelcoat is finally done!
47 We installed new seats, gauges, steering, etc
48 We also reburbished the trailer!
49 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
50 This Bayliner rolled into a tree
51 The bad ground out and ready to glass up
52 Almost ready to paint
53 Sanding the new gel
54 All done with new rub rail and ready for the customer to pick up
55 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
56 This customer hit an underwater object with the engine. The engine cowl hit the boat!
57 A close up picture to show the damage!
58 Working down the new fiberglass
59 Ready for the engine & jackplate!
60 The engine needed some repairs also!
61 We had to do a little welding work!
62 Ready to go to detail!
63 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
64 A Thundercraft project
65 New paint, wheels, tires, engine, etc
66 New interior
67 Ready for the customer to pick up
68 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
69 This boat had some bad cracks on the hull
70 Bad glass out, new glass being fitted
71 Takes a lot of glass and blocking to insure the repair is straight and true
72 Lots of sanding and buffing
73 Ready to load on the trailer
74 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
75 We can also replace skegs!
76 Custom camo paint jobs are also available
77 Repower jobs and custom rigging jobs are easy
78 This boat was a bare hull when we started!
79 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
80 This boat was hit in traffic!
81 The damage was all the way down the side!
82 Cutting out the bad to rebuild it
83 Working down the glass
84 All finished and ready to go!
85 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
86 This one hit a bouy
87 Bad glass on deck cut out
88 Glassed up and ready to shape
89 Blocking down the black guide coat
90 Ready to install new rub rail
91 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
92 Engine impact caused the engine cowling to hit the boat
93 This one had a few cracks to fix
94 Almost ready to spray
95 Ready to go to detail
96 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
97 Front deck was really soft
98 The deck peeled up due to the rotten wood
99 New flooring glassed in
100 Deck painted and we replaced the hatches
101 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
102 This one was brought in to refurbish the hull
103 Lots of chips, gouges & scrapes
104 Looking good
105 Ready to pick up!
106 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
107 Another custom refurbish job!
108 This one needed a lot of work!
109 Bottom of the hull was really bad
110 Flake and clear ready to be worked down
111 New seats, carpet, steering, etc!
112 Ready for the customer to pick up!
113 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
114 Factory requested repair on a Kenner
115 Almost ready to paint
116 Ready to reinstall the engine!
117 This one had a small accident
118 As good if not better than new
119 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
120 This boat hit a tree!
121 Bad areas cut out and new fiberglass being applied. A lot of work to be done
122 A lot of sanding and shaping to do
123 New flake sprayed and ready to sand
124 Ready to go to detail!
125 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
126 This one found and underwater bridge
127 Damaging most of the bottom
128 Ready for detail!
129 Customer hit something and bottom started delaminating
130 Ready for gelcoat
131 Ready to block down and buff
132 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
133 Another car wreck victim
134 Another shot of some of the damage
135
136
137
138 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
139 This one rolled down a hill on the trailer
140 Bow stand got bent
141 All the bad glass ground out
142 Spraying the burgundy gel coat
143 Bow stand repaired and painted
144 All done and ready for detail
145 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
146 This boat had severe hull delamination due to a poor previous repair at another facility
147 A large section actually peeled off
148 Ready to start grinding and laying glass
149 Laying one of many layers of fiberglass
150 Shaping the new glass with body file
151 Almost ready to spray with gelcoat
152 Ready to flip over and send to detail
153 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
154 This one had cracks in the hull
155 One of the stringers was loose
156 Ready to recarpet
157 Ready for detail
158 This boat had a lot of cracks on the hull..
159 We found more on the bottom
160 Working the glass down
161 Ready to go to detail!
162 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
163 This customer knocked transom loose!
164 All done and better than new!
165 Ready for the customer!
166 This floor in this older boat had been scabbed together
167 Old floor is out and almost ready for new
168 New floor in and gelcoated per customers request!
169 There is virtually nothing you can do to a boat that we can not repair as good or better than new!
170 This customer was hit by another boat
171 The deck and hull was damaged!
172 Cutting out the bad areas
173 Removed part of the deck for access
174 Glass is shaped and gelcoat is going on hull
175 Hull is ready to block down and buff
176 Putting the deck back together
177 Ready for the customer!
1982 Hydrostream Viking Restoration
1982 Hydrostream Viking Restoration Part 2c: The Rebuild Daniel W. Rickey Winnipeg, Manitoba Canada daniel@cancercare.mb.ca 2000-09-22 Introduction Part one of this report showed how the shoddy manufacturing
More information[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING:
Progression 22 This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 22. As you compare Progression s many superior features to the competition, it will
More informationProgression 24LD Stern Drive
Progression 24LD Stern Drive This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 24LD. As you compare Progression s many superior features to the competition,
More information1982 Hydrostream Viking Restoration
1982 Hydrostream Viking Restoration Part 1: Discovery Daniel W. Rickey Winnipeg, Manitoba Canada daniel@cancercare.mb.ca 2000-06-19 Introduction The following photos illustrate some of the work I have
More informationSurfboard Repairs Chapter 7
Surfboard Repairs Chapter 7 The Complete Surfing Guide for Coaches - Bruce "Snake" Gabrielson Repair Problems Boards continuously get bumped, hit rocks, break fins, get dropped, and many other things that
More informationThere Is Three Different Types Of Loads
Boat Transporting There Is Three Different Types Of Loads Larger Boats With IPS Hulls. For Example: Fishermen, Tyees, Pro Vs. Boats Without IPS Hulls. For Example: WC, A, Rebel Models. Boats Which Are
More informationThe Refit of a Classic Cheoy Lee 41
DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/tr/html4/loose.dtd"> The Refit of a Classic Cheoy Lee 41 The Refit of Astraea Site Navigation Phase I Phase 1B Phase 1B Cont
More informationStevenson Projects Building the Hull Top Deck and Bulkheads
Stevenson Projects Building the Hull 1. Print out both piece sheets. 2. Cut out one keel piece and glue it to a piece of balsa wood or dense cardboard. Cut out the second keel piece and glue it to the
More information34. Aft view of the boat at it s highest point.
32. The repaired holes. Still looks pretty ugly, though maybe not quite as bad. The epoxy probably isn t strong enough to make any difference in strength, but you never know of a piece of masking tape.
More informationPROBLEM? Coaches are not only concerned with coaching crews; they have an underlying responsibility for crew
EQUIPMENT CHECKS KAT ASTLEY CHRIST S COLLEGE BOATMAN -And ex-irresponsible college rower! - IS EQUIPMENT YOUR PROBLEM? Yes! ARA states clearly: Coaches are not only concerned with coaching crews; they
More informationMaintenance. Since your boat has a relatively high building number, you probably have some small interior changes to the old standard:
Maintenance You were asking for tips of maintenance. The boat was made from the best materials available in those days, and you may find the boat being in a remarkable good condition after all these years.
More informationPAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro
1980 82 PAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro Introduction: The 1980 turbine Pay N Pak is a good subject for a model race boat. It has a low profile, mild pickle-fork setback, long
More informationNauticStar 1900 Sport Offshore
NauticStar 1900 Sport Offshore Year: 2011 Length: Make: Model: 18 ft 8 in NauticStar Price: $ 22,900 1900 Sport Offshore Location: Wilmington, NC, United States Beam: Draft: 8 ft 1 ft 1 in Hull Material:
More informationPLATE BOATS ENGINEERED EXCITEMENT
PLATE BOATS ENGINEERED EXCITEMENT PLATE BOATS >> ENGINEERED EXCITEMENT >> PLATE BOATS >> ENGINEERED EXCITEMENT >> PLATE BOATS >> ENGINEERED EXCITEMENT SUPREMACY EIGHT MODELS SO TOUGH THEY NOW COME COMPLETE
More informationWeathering tips with Laurence Farrugia
Weathering tips with Laurence Farrugia Some notes taken during (and checked by) Laurence Farrugia weathering demonstration Disclaimer from Laurence This is not the technique, it is a technique I have used
More informationwww.crevalleboats.com Introducing the all-new 24 Bay & 26 Bay from Crevalle! Boat show attendees often refer to Crevalle as a Crossover or Hybrid boat. The fact is, this was the engineering and design
More informationHIGHFIELD OM540 & HONDA BF100 - special offer!
HIGHFIELD OM540 & HONDA BF100 - special offer! Highfield OM540 specially designed for XXXI Euro-African Spearfishing Championship in Mali Lošinj www.losinj-spearfishing.com We are presenting a SPECIAL
More information1/10 th Scale 1956 Ted Jones Classic Hydroplane
1/10 th Scale 1956 Ted Jones Classic Hydroplane Preparation These plans show outside sheeting of 3/32 balsa laminated with 1/64 birch ply. This makes a light and strong skin for this boat. Optionally you
More informationChapter 2. Before You Get Underway. Copyright Coast Guard Auxiliary Association, Inc.
Chapter 2 Before You Get Underway 1 We ll Discuss: 1 Capacity 2 Float Plan 3 Pre-Departure Checks 4 Trailering & Fueling - Safety 5 Launching and Retrieving 6 Boat Maintenance 7 Boating Accessories 2 Capacity
More informationMurray F Reid. Marine Surveyor and Consultant CONDITION REPORT (HULL EXTERIOR) 10 February Catamaran SAMURI
Murray F Reid Marine Surveyor and Consultant 21 Blue Gum Lane Kerikeri 0293 Bay of Islands NEW ZEALAND Phone: +64 9 407 8988 Mobile: +64 21 233 0487 survey@marinesolutions.co.nz CONDITION REPORT (HULL
More informationPhoto Essay: How to Build a Nova Scotian Grand Banks Dory By Jeff Spira Plans available at: http://spirainternational.com/ How to Build a Nova Scotian Grand Banks Dory By Jeff Spira In Lunenburg, Nova
More informationGrain Surfboards Frequently Asked Questions
Grain Surfboards Frequently Asked Questions Section 1: Grain Boards 1. How does building a Grain board differ from building a foam board? 2. They look more like furniture than surfboards. Are Grain boards
More informationOwners Mannual for ICS Quality Baths
2018 pg1 Owners Mannual for ICS Quality Baths ICS Quality Baths is a major supplier of many types of bathtubs. Care instructions vary from type to type, but all of our tubs are easy to clean. For general
More informationThere is an Adobe PDF file available, detailing the HP Nissan Outboard Motor.
1995 Tracker 16' Sportsman aluminum hull fishing boat, with an excellent condition and compression, recently tuned up and serviced, 1988 Nissan 25 HP Outboard. The boat has three installed seats (fore,
More informationWith a Contender, You re Always in the Game. Powered by
From the marlin rich waters of the Caribbean Islands, up the checkered coastal towns of the eastern seaboard. You ll find Contender Boats - In the Game No matter if you re bumping around the bay, or battling
More informationMARIA HF31. SCALE: 1/72 Length: 365 mm width: 85mm height: 295 mm
MARIA HF31 SCALE: 1/72 Length: 365 mm width: 85mm height: 295 mm HISTORY: Maria HF 31 is a fishing Ewer whose home base was Finkenwerder in northern Germany. Maria HF31 operated in the North Sea for more
More information2018 Panfish 16. Page 1 of Panfish 16. Transom height 21.4" Bottom width 4' Max. recommended HP. Average package weight
2018 Panfish 16 Length 16' 2'' Transom height 21.4" Beam 5' 10'' Deadrise at bow 13 degrees Bottom width 4' Deadrise at transom 6 degrees Max. recommended HP 40 HP Hull material 0.090 5052 marine alloy
More informationREDEFINE EXPECTATIONS
REDEFINE EXPECTATIONS The revolutionary design of the X3 allows you to use the boat in the most extreme conditions. The X3 will deliver you dry and safe across shallow flats, wind blown bays, and even
More informationQingdao Lian Ya Boat Co.,Ltd Tel: / Mobile
Lian Ya Profile: Qingdao Lian Ya Boat Co.,Ltd Lian Ya team is a professional designer manufacturer, of RIB Boat,Inflatable boat, fiberglass boat with CE certificate. Located in Qingdao, China Our main
More informationPeinert ZEPHYR. Assembly. The Zephyr is easily rigged; there are only three removable parts - the seat, the foot stretcher, and the rigger arm.
Peinert ZEPHYR Assembly The Zephyr is easily rigged; there are only three removable parts - the seat, the foot stretcher, and the rigger arm. Removal and installation of the seat. If the seat is in the
More informationLITTLE TRI construction
LITTLE TRI construction I have built almost anything that can sail. At the age of 12 my first sail thing, an ice boat. I used skates which had to be mounted on shoes as runners. Big fun, very fast, only
More informationREPAIR MANUAL. Materials
REPAIR MANUAL Materials Balsa: Raw material for FST (Future Shape Technology series) and HELIUM rails or parabolic stringers. It is what gives our unique product its excellent performance characteristics.
More informationSHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
More informationMORE MELGES POWER TO YOU.
MORE MELGES POWER TO YOU. PRESENTING THE ALL NEW MELGES POWER 26: CULMINATION. COLLABORATION. SHEER PASSION FOR PERFECTION. From the creative and innovative minds at Melges Boat Works comes a boat that
More informationFinnish Yacht Surveyor Association MARINE SURVEY REPORT
Finnish Yacht Surveyor Association MARINE SURVEY REPORT Place and date of the survey: Kotka Wooden Boat Center, and the sea area outside Kotka, in Finland. Conditions during the survey: The yacht was lifted
More informationBluewater 23t. Deck Hand-laminated deck cap with 10 rod holders One forward anchor locker with FRP liner One forward fish box with foam insulation
Bluewater 23t The 23t is tournament bred, incorporating virtually all the must-haves demanded by a true fishing fanatic. If that s you, this is your boat. We package the 23t with almost all of the options
More informationPRODUCT CATALOGUE 2018
Rigid & Inflatable Boats KOLIBRI PONTOON BOATS KOLIBRI Boat Manufacturing Company a. 4, K.Gordienka str. Dnipro, Ukraine t. +8 (06) 7 7 76 f. +8 (06) 7 7 79 t. +8 (096) 148 11 1- service g. 48 8 19.06
More informationLOD 39.8, LWL 29.1, Beam 11, Draft 4.7 (centerboard up), Displacement 21,000 lbs Designer: Wirth M. Munroe Built 1956 by Warren Bailey.
COMANCHE LOD 39.8, LWL 29.1, Beam 11, Draft 4.7 (centerboard up), Displacement 21,000 lbs Designer: Wirth M. Munroe Built 1956 by Warren Bailey. Comanche was designed and built in Miami for Jack Price,
More informationOwners Mannual for I C S Quality Tubs
2018 pg1 Owners Mannual for I C S Quality Tubs I C S Quality Baths is a major supplier of many types of bathtubs and care instructions vary from type to type. Please identify your tub type from the following
More informationTrim Tab Wind Vane for boats with transom mounted rudders
Trim Tab Wind Vane for boats with transom mounted rudders If your boat has a transom mounted rudder, you can build this self-steering windvane for around $150, using regular wood working tools and some
More informationPART II Building the MDV-1
21 PART II Building the MDV-1 The MDV-1 is a simple, easily driven, seaworthy boat intended for both rowing and power propulsion. Its general-purpose design is suitable for inshore waters around the world.
More informationThe Wheel Shop. You go to a shop that sells tricycles. There are 18 wheels in the Wheel Shop.
Problem of the Month The Wheel Shop Level A: You go to a shop that sells tricycles. There are 18 wheels in the Wheel Shop. How many tricycles are in the shop? Explain how you know. Problem of the Month
More informationSEA RAY 290 BOWRIDER SEA RAY
SEA RAY 290 BOWRIDER SEA RAY Builder: SEA RAY Year Built: 2003 Model: Runabout Price: $32,900 USD Off the market LOA: 29' 0" (8.84m) Beam: 9' 8" (2.95m) Min Draft: 1' 11" (0.58m) Max Draft: 3' 2" (0.97m)
More informationCWS Maritime Services
CWS Maritime Services REPORT OF MARINE SURVEY Audio Gauging of the vessel "PAUL JOHANSEN" 1970 Smedvik mek Versted PREPARED EXCLUSIVELY FOR: Farley Blackman CONDUCTED BY: Chuck Solarek on July 9, 2012
More informationRybovich Express Blue
Rybovich Express Blue Make: Model: Length: Rybovich Express 44 ft Price: $ 525,000 Year: 1989 Condition: Used Location: St Augustine, FL, United States Boat Name: Hull Material: Number of Engines: 2 Fuel
More informationTHE SOUTHPORT STORY EXPERIENCE THE BEST RIDE OF YOUR LIFE.
SOUTHPORT FLEET THE SOUTHPORT STORY Southport Boats is the culmination of a dream that began in North Carolina when a team of experienced boat builders, passionate fishermen, and offshore racing enthusiasts
More informationphotos by JURIJ KORENC production STUDIO 37
photos by JURIJ KORENC production STUDIO 37 www.studio37.si Elan Marine d.o.o. Begunje 1, SI-4275, Begunje na Gorenjskem, Slovenia Phone: +386 4 535 13 70, Fax: +386 4 535 13 60 E-mail: elan.marine@elan.si
More informationPre-Paint>Fuselage>Empennage>Fit vertical tail fin. Objectives of this task: Materials and equipment required: Fit the spar extender
Pre-Paint>Fuselage>Empennage>Fit vertical tail fin Objectives of this task: To fit the vertical tail fin to the fuselage, including fitting the static probe, static tube, optional strobe light wiring and
More informationVacuum Bagging Wings Instruction Manual Purdue University
Vacuum Bagging Wings Instruction Manual Purdue University Note: Do not leave the vacuum pump running unattended! Revision: Original Release 10/31/15 Vacuum bagged wings are quick to build, light weight,
More informationFOUR-ON-THE SNOW Newsletter
FOUR-ON-THE SNOW Newsletter A publication of Tucker Sno-Cat Corporation Made in the USA since 1942 NO SNOW TOO DEEP NO ROAD TOO STEEP February 2015 Volume 7 Issue 2 Rear engine Tucker Sno-Cat Vehicles
More informationTransom. Stern. Starboard side. Stem between planing and displacement hulls. Sample. page
Chapter 1 Review questions 1. Label the illustration of the boat opposite using the list of terms provided. Bow, stern, port side, all-round light, stem, transom, deck, portside, starboard side, coaming,
More informationKeel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
More informationBicycle Noise Diagnosis
Bicycle Noise Diagnosis Bottom bracket noise is a common complaint but most times the noise could be coming from another area on the bicycle. Noises that are telegraphing through the frame often sound
More informationCall for Additional Information (cell) NIMBLE KODIAK Trawler
Call for Additional Information NIMBLE KODIAK Trawler The Pilothouse of the Ted Brewer designed Nimble KODIAK sets this boat apart from any production boat built today. The KODIAK has a pilothouse 6 ft.,
More informationWinners Of The Classic Boat Professional Boat Builders Trophy 1997 NORTH QUAY DAYBOATS NORTH QUAY 15, 17 & 19 GAFF RIGGED DAYBOATS
North Quay Marine NEW TRADITIONS IN BOATBUILDING Winners Of The Classic Boat Professional Boat Builders Trophy 1997 NORTH QUAY DAYBOATS NORTH QUAY 15, 17 & 19 GAFF RIGGED DAYBOATS These are designed by
More informationCampbell Boat Bulkhead Replacement
Campbell Boat Bulkhead Replacement Bob & Buddy Steele Assisted by Brad Riggen, Ron Fasola, Freddie Kuerner Our story begins in the late spring of 2012, with the purchase of my 1974 Campbell Cuddy Cabin
More informationE-trike Li Assembly Guide
PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box
More informationJ Boats J/30 Patch of Blue
J Boats J/30 Patch of Blue Make: J Boats Model: J/30 Length: 30 ft Price: $ 27,900 Year: 1981 Condition: Used Location: Seattle, WA, United States Boat Name: Hull Material: Draft: Number of Engines: 1
More informationAidan Tuckett B.Sc.(Hons).
1 of 11 Aidan Tuckett B.Sc.(Hons). MARINE SURVEYOR Accredited Member of the Yacht Designers and Surveyors Association REPORT OF A CONDITION SURVEY CARRIED OUT ON THE VESSEL: xxxxxxxxxxxxx 2 of 11 CONTENTS.
More informationI N S P E C T I O N R E P O R T
I N S P E C T I O N R E P O R T Project : Yacht III Shipyard : ITM, Marseille, France (Sub)contractor : ACA Marine CCS Coating Advisor : Shaun Pyne Persons contacted : Gilles Bredy, Laurent Francois (ITM)
More informationConstruction Chapters Index
Construction Chapters Index 9 7 8 Chapters Index c. c. c. c. c. c. c7. c8. c9. c0. c. c. c. c. c. c. c7. Balsa Wood Skeleton Strip Planking Hull Fairing Keel Bulb Mould Lead Bulb Casting Keel Construction
More informationINSTALLING YOUR CLC RUDDER
INSTALLING YOUR CLC RUDDER These instructions are written to help you install the CLC rudder kit on your wooden kayak. The rudder can be fitted to your boat during construction or after completion. Please
More informationWe hope you ll enjoy the Drifter as much as we have! Scott DeTray Model Aero Specifications:
We are excited to bring you the Drifter RC airboat. You re probably thinking it doesn t fly so what is Model Aero thinking??? We have always liked RC vehicles of all types and have had a fondness for airboats
More informationBoat Strength Errata & Updates 5/7/18 Sheet 1 of 5
Boat Strength Errata & Updates 5/7/18 Sheet 1 of 5 Formulas 1-2 and 1-3, page 7: Instead of averaging LOA and LWL and when LOA is more than 108% and instead of averaging BOA and BWL when BOA is over 112%,
More informationOCEANIS 400 DECK FITTINGS
DECK FITTINGS Anodized aluminum stemhead fitting with (2) rollers, one tilting Anodized aluminum toerails (4) anodized aluminum mooring cleats (4) roller fairleads aft and amidships Aft anchor roller to
More informationCOLLECTION
info@oxxeaninflatables.com www.oxxeaninflatables.com COLLECTION About OXXEAN Inflatables is dedicated to the manufacture of high quality PVC rigid inflatable boats. We are committed to exceed customer
More informationAll of our boats are designed by sailors, who are very aware of the little details that make life aboard more enjoyable for all involved.
Catalina 250 First introduced in 1994, the Catalina 250 has already become what many consider a modern classic. This proper, safe and affordable pocket cruiser. was designed for the growing sailing family.
More informationUSS Charles F Adams DDG-2 Philadelphia Open House. May 17-18, 2010
USS Charles F Adams DDG-2 Philadelphia Open House May 17-18, 2010 Starboard Side P1000506 Port side looking aft 39 radar is bolted to a bracket that is welded to the main deck. Note that the air vents
More informationDemon Yachts Kite. Boat Show Boat. Aldeburgh United Kingdom 24,995
Demon Yachts Kite Demon Yachts Kite Aldeburgh United Kingdom 24,995 Boat Show Boat The Kite is a gaff sloop-rigged centreboarder with a light and airy twoberth cabin, a generous cockpit, light carbon spars
More informationSTANDARD SPECIFICATIONS
STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2
More informationFlow Kayaks. SharpSki 6.5 Review
Flow Kayaks SharpSki 6.5 Review 1 Summary I love this boat Melbourne Paddler Overview An elite class ocean racing ski with features similar to the more popular elite models, such as the Fenn Elite, Fenn
More informationGar Wood Triple Cockpit Runabout
Gar Wood Triple Cockpit Runabout Make: Gar Wood Hull Material: Model: Triple Cockpit Runabout Number of Engines: 1 Length: 28 ft Price: $ 195,000 Year: 1936 Fuel Type: Wood Gas/Petrol Condition: Used 809
More informationaero naut Order No. 3009/00
aero naut Order No. 3009/00 Introduction: The model should be assembled following the sequence of the stages of construction described in these instructions. The laser-cut components are individually numbered.
More informationSTEALTH 1200 OWNER'S MANUAL
STEALTH 1200 OWNER'S MANUAL Decoy Slots Gun Rack With Shell Holder Tie-Down Slots Side Storage Compartments Watertight storage compartment front and back Molded-In Handle Drain Plug Oar Lock Space Cup
More informationInuit Owners Manual. Inuit 13.5
Inuit Owners Manual We have advanced the design and comfort level of the Inuit series beyond any other touring kayak. The Tru-Track hull offers straight tracking despite the shorter hull length plus it
More informationbenefits Triton owner Table of Contents
Letter from Earl Bentz If you re looking for an aluminum boat with the quality, dependability and value built into all Tritons, our 2015 line has just the boat for you. Examine the fit, finish and features
More informationAruba 8 ss Sit-In Kayak. Aruba 10 Sit-In Kayak RECREATIONAL KAYAKS. 2 sundolphin.com
PRODUCT CATALOG RECREATIONAL KAYAKS Aruba 8 ss Sit-In Kayak Aruba 10 Sit-In Kayak Lightweight easy to carry Adjustable, padded seat back Storage compartment On-board storage with shock cord deck rigging
More informationClassic Crosby Wianno Senior in excellent condition. Just launched for the 2018 season SALTWORKS is ready to go to her next owners
http://www.yachtworld.com/brooklin Brooklin Boat Yard - John Maxwell P.O. Box 143 Brooklin, ME 04616, United States Tel: 207-359-2193 Tel: 207-387-8383 Fax: 207-359-8871 brokerage@brooklinboatyard.com
More informationCOMPARISON BETWEEN THE MACGREGOR 26 AND THE HUNTER EDGE. November 20, 2008
COMPARISON BETWEEN THE MACGREGOR 26 AND THE HUNTER EDGE November 20, 2008 PRICE: (Retail) MACGREGOR 26M HUNTER EDGE Base price, standard boat $21,500 $32,990 Surge Brakes Option $584 Std This is an option
More informationDO IT YOURSELF WHEEL STRAIGHTENING For the FORD MODEL A
Check back to my website for updates to the following document. Look for the document on my Services page. As I develop new processes, I will revise the document and share the info. Thank You. Dave Gerold
More informationXXXXXXX, 200X Beneteau Oceanis 473
1 of 9 Aidan Tuckett B.Sc.(Hons). MARINE SURVEYOR Accredited Member of the Yacht Designers and Surveyors Association REPORT OF A CONDITION SURVEY CARRIED OUT ON THE VESSEL: XXXXXXX, 200X Beneteau Oceanis
More informationBUILDING INSTRUCTIONS
Z I P P M A N U FA C T U R I N G A Zippkits R/C Boat BUILDING INSTRUCTIONS 2010 Zipp Manufacturing Frankfort, New York 13340 www.zippkits.com Table of Contents Introduction 1 Engine Mounting 30 S E C T
More informationBassmaster College & High School Retail Purchase Bonus
Letter from Earl Bentz 2017 marks Triton s 20th Anniversary as America s premier fishing boat manufacturer! From Day One, the Triton team has focused on building premium boats that exceed the needs of
More informationFor sale: SY BRENDANUS, a Sparkman & Stephens S&S 34
For sale: SY BRENDANUS, a Sparkman & Stephens S&S 34 Marcel Doswald: Seestrasse 19; CH 6373 Ennetbürgen; Tel.: +41 41 610 71 41; doswald@intermarin.ch BRENDANUS is ready to sail. All you need for a long
More informationThe Port Isaac 40 Charter Catamaran.
The Port Isaac 40 Charter Catamaran. Although we have been building this cat for about 11 years now, it is still probably the best kept secret in the charter world. We can only build up to four Cats each
More informationHunter 216. Curtis Stokes & Associates - David P. Robinson
Hunter 216 Year: 2006 Length: Make: 21 ft 6 in Hunter Model: 216 Price: $ 9,900 Location: Queen Anne, MD, United States Beam: Draft: 7 ft 11 in 3 ft 6 in Hull Material: Composite Fuel Type: Gas/Petrol
More informationTECHNICAL SPECIFICATION. Boat type: FRSQ 600 A. Engine configuration: Revision status
Boat type: FRSQ 600 A Boat design / purpose: Hull material Engine configuration: Propulsion: G.A. drawing no.: Fast rescue boat Aluminium Outboard Single Outboard 3FP-100039 Revision status Rev. Revision
More information1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
More informationNext Generation BY FREDDY FOOTE. OVER the last few months, the entire
Next Generation BY FREDDY FOOTE Not content to be on of the leaders of alloy boat building in New Zealand, Surtees have given much of their range a full revamp. Freddy Foote heads along to check out the
More informationPeinert Dolphin. Assembly
Peinert Dolphin Assembly The Dolphin is easily rigged; there are only four removable parts - the seat, the foot stretcher, the rigger arm, and the fin. Removal and installation of the seat. If the seat
More informationStep 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the seam joint is.
WhiplashGV Instruction Manual Email: Brian@Blazermarine.com Phone: 513-598-1769 Step 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the
More informationSCOUT RYBOVICH. LOA: 37' 0" (11.28m) Builder: RYBOVICH. Beam: 11' 3" (3.43m) Year Built: Max Draft: 3' 5" (1.04m) Model: Sport Fisherman
SCOUT RYBOVICH Builder: RYBOVICH Year Built: 1965 Model: Sport Fisherman Price: $369,000 USD Off the market Location: United States LOA: 37' 0" (11.28m) Beam: 11' 3" (3.43m) Max Draft: 3' 5" (1.04m) Cruise
More informationCONDITION AND VALUATION SURVEY
EDGEWATER MARINE SERVICES of ALASKA MEMBER SOCIETY OF ACCREDITED MARINE SURVEYORS (S.A.M.S. ) P.O. Box 3505, Homer, AK. 99603 (907) 235-1063 Phone/Fax or Cell 299-1839 CONDITION AND VALUATION SURVEY This
More informationBoard Glassing Chapter 6
Board Glassing Chapter 6 The Complete Surfing Guide for Coaches - Bruce "Snake" Gabrielson Glassing Guidelines Like shaping, there is probably any number of ways to successfully glass a blank. Yet there
More informationThe Lido 14 Class Association presents. Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership
The Lido 14 Class Association presents Family fun in the Lido 14 and the benefits of Lido 14 Class Association Membership Table of Contents and Helpful Links Like Fun? The definitive family boat, One Design
More informationChapter 1 Boat systems
Chapter 1 Boat systems Hulls Two common types of boating hulls, displacement and planing, are shown in Figure 5.1. A displacement hull is a type of hull that ploughs through the water, displacing a weight
More informationPPM-8240 JEEP XJ REAR SPRING HANGER BRACKET Version 1.1
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-8240 JEEP XJ REAR SPRING HANGER BRACKET Version 1.1 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
More informationANATOMY OF FUSELAGE REPAIRS
ANATOMY OF FUSELAGE REPAIRS The first part of this file is about doing a repair on the glassed-over fuselage. The latter part covers some repairs on composite fuselages. The glassed-over fuse will stand
More informationParts Catalogue issue: 15.1
Parts Catalogue issue: 5. Issue 5. Page 2 Page 3 Page 4-5 Page 6 Page 7 Page 8 Page 9 Page 0 Sportjet 460 exterior Sportjet 520 exterior 460-520 models fittings 460-520 models console 460-520 models engine
More informationStellar Surf Skis Manual File for future reference in a safe place
Stellar Surf Skis Manual File for future reference in a safe place Serial Number Date of Purchase Location of Purchase Kayaking can be very dangerous and physically demanding activity. The paddler of this
More information