Telescopic winch handle Speedfriend"
|
|
|
- Osborn Griffin
- 5 years ago
- Views:
Transcription
1 Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch; handle grip on ball bearing; made of nylon (fiberglass), ensure the same strength as steel handles. Made of nylon/fiberglass, fitted with carbon surface coating, ball bearing handgrip, "Lock In" winch system. Length Length (8") (8") (10") (10") Spare winch handles Winch handle Made of black light alloy, fitted with nylon handgrip and safety locking system; universal model with international hexagon. Made of pressed mirror polished stainless steel; universal square size 17, fitted with safety lock. Length Length Winch handle pocket Made of soft PVC, section 90x60 ; length 290 Telescopic winch handle Speedfriend" Made of composite material; stainless steel ball bearing handgrip; the telescopic system can change the force rate and the recovery speed of the sheet, thus improving the performance; universal fitting with lock. Travel /254 Winch handle holder Made of sturdy white sail fabric with trims, universal model, elegant package. Universal winch handle holder Made of black nylon, suitable for winch handles; 3-screw mounting, used instead of PVC pockets. Ø base Size Spreader covers Made of abrasion resistant soft PVC, may also be used as stanchion head protection. Size For max cable size x x x Sail only in couple 688
2 Sailguard" sail savers Made of white nylon; easily installed without dismounting the shrouds; supplied in an elegant package. Suitable for stays up to 9 Sail only for pieces. Jib furling system with manual return line; genuine Sea Sure" product Made of stainless steel, fitted with nylon pulley. Suitable for all types of keels Genuine "Sea Sure" swivel Made of stainless steel, suitable for jib furling systems, fitted with stainless steel bearing. HOOD Seal Flex furling device fitted with profile This furling device was designed to offer small boats the same advantages of large boats, maintaining a low cost. Easy to install, one piece plastic profile fitted with embed inside a steel cable to improve performance (maximum forestay length m pin to pin). Removable drum for high performance; made of anti-uv plastic material, rust-proof and Derlin ball bearing to provide perfect sliding. With stay up to For boat size from 18 to
3 57 BAMAR FURLER CROCIERA" Designed for easy mounting without special tools, supplied with a simple instruction manual. The drum provides space for the forestay turnbuckle to simplify the installation. Fitted with modular oval extruded anodized alloy aluminium foil elements, 1.5 metres long, twin groove, which provide a high aerodynamic performance. The drum has special stainless steel spacer chain plates for best positioning over the deck; the chain plates are pierced for best height adjustment and anchor crossing. The swivelling head and the drum work on double sphere Derlin balls which do not require lubrication and only need little maintenance. The drum is made of anodized aluminium and its stainless steel components are insulated with a nylon film. Designed for mounting over existing headstay by releasing it from head chain plate. The size of the lower headstay terminal should be lower than 13 for models /054/055 and lower than 23 for models /057. Technical features Reference C C0T C C C ROD # * Ø Fune 1x19 ** Max sail m 2 (150%) LFT max m 8 8,7 10, ,5 A B C D E F G H I J L Ø M Ø N O P Q R S T U V W X Y Z Ø a Ø d Ø i Ø m Kit base Headstay extention length overall KK 4,12 meters length overall KK 5,99 meters length overall KK 9,13 meters length overall KK 12,23 meters length overall KK 15,32 meters
4 Chain plates, sail battens HOOKS - SNAP SHACKLES - SLIDERS - SHEET FAIRLEADS - U-BOLTS - SNAP HOOKS - PLATES - CHAIN PLATES - BATTENS - TERMINAL CAPS 58 Multipurpose hooks Made of polished stainless steel. Version wire Ø size Length ragged edge ragged edge grapnel grapnel grapnel Masthead plate Made of stainless steel; fitted with two shrouds fittings, one forestay and one jib halyard with pulley. Suitable for boat size from m 3,5 to m 4, hole stainless steel U bolt; suitable for boom size 40/50, width V" plate made of stainless steel for boom, with four holes. Designed to mount the boom s blocks V" plate made of stainless steel for mast 50/ chain plate fors.s. shroud fitting size 15x1,5 with pin Ø stainless steel hook for sheets and other uses Bent chain plate Length hole Ø Plug Material x10 stainless steel Bent chain plate fitted with two holes From Ø pins Adjustment Stroke Material x in 3 68 stainless steel x in 3 68 stainless steel Double chain plate made of stainless steel, fitted with adjusting holes. Pin Ø Forestay holder stainless steel Stainless steel forestay holder Ø hole Height various holes size Base Height x x
5 58 Hollow chain plates Made of stainless steel, to be used in place of rigging screws. tape size hole Ø x x x x Hollow chain plates Made of heavy stainless steel Length Width Thickness hole Ø , ,5 8 "U" plate suitable for the mast foot Made of stainless steel, "U" shape; fitted with adjusting holes a Balck nylon hook Jack Holt" for retention spi rope Balck nylon hook Jack Holt" for spi retention and various uses Boom brackets Made of stainless steel wire, suited for hoist block wang fitting, etc. Wire Ø Width Height Pins Jib slide balck nylon hook Jack Holt" for retention spi sheet Balck nylon hook Jack Holt" for spi retention and various uses Up to Hole Ø Material Nylon Nylon Nylon tab, for wheel retention so that is does not slip off Heavy duty wheel stopper clips made of stainless steel, thickness 1,6 with oval holes used for adjustment Slides for high-resistant mainsails Made of stainless steel, also suitable as boom holding points. B C D , , ,5 25 Mainsail slides Width B" max traction load kg Material Nylon Nylon Nylon Nylon 692
6 Snap shackle, suitable for holding and stretching side fabric. cable passing Material Nylon Mainsail slide A B C Width Material ,5 23 nylon ,5 23 nylon Slides for semicircular mainsails A B D E Material ,5 nylon ,0 nylon Mainsail slide shackle Ø plug (Pin) Suitable for slider model Material nylon nylon * / nylon * Long type, plug Ø (Pin) 8, light 42, specially suited for fence nylon mainsails black nylon sheet fairlead Sheet fairlead with inner stud Made of stainless steel For rope size / / /10 "V" bolts suitable for chain plates, fitted with welded upper plate Made of stainless steel L1 L2 L3 B D Sheet fairleads Hole Hole *Passing reforcement made of stainless steel Strong grip/step Made of polyester webbing, fitted with stainless steel shackle and stainless steel ring; suitable as boon hoist blocks, life-line fitting or many other uses, wherein a strong and sturdy fitting is required. For pipes up to Ø
7 58 Battens for sails and boat awnings Suited for satin fibreglass sails; high resistant and remarkable flexibility; designed according to the latest technologies and based on regatta demands /47/51/52/ /48/ /12/14/16 Plate Round Ø Bar length m Terminals minimum order in mt 2 m bars bars 3/4/6 m x4,0-2 o x2, * x4,0-2 o * x2, x2, x3, x3,0-2 o x4,0-2 o *sold in pairs Terminal caps For battens For battens * * *Sold in pairs (a large one and a small one) Sail batten protection caps Made of nylon, the kit includes two terminals and mounting screws. for flat battens / / Heavy Duty 35/40 694
STANDARD SPECIFICATIONS
STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2
MANUAL REEFING SYSTEMS
MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations
OH MARINE EQUIPMENT made to last
OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or
Essential Rig Tuning Guide The Ins and Outs of tuning your mast.
Essential Rig Tuning Guide The Ins and Outs of tuning your mast. Tuning Your Rig The main goal in tuning your mast is to achieve a spar that s straight. By doing this it will help you gain control of sail
MKIII JIB REEFING & FURLING
MKIII JIB REEFING & FURLING MKIII OFFSHORE BOATS 22' - 100'+ (7 m - 30 m+) JIB REEFING & FURLING MKIII jib reefing and furling systems are modern and elegantly styled. Constant refinements to these dependable,
2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.
VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working
Sail Measurement Form
Sail Measurement Form Yelkenbicer's database of boat rig specifications is extensive and in most cases, no further information is required to prepare a sail. However, if your boat's rig is custom or has
J/70 Building Specification
DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI
Furlex 104S-404S (Standard)
104S-404S (Standard) The 4th generation of an icon The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design blended with innovation
LS LX RX STRENGTH PERFORMANCE INNOVATION / 11
H E A D S A I L F U R L I N G & R E E F I N G S Y S T E M S Race developed technology : The LS/LX/RX Range has been developed according to a specific technological concept to establish the west-about solo
Rig Fittings. PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05
26 PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed brass wire type. (3mm suits 1m or M, 4ba for 10r and RA class). 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type, less than 1/2 weight of chromed
FDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange
Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is
Topaz OMEGA Rigging Instructions
Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom
OWNER S MANUAL OWNER'S MANUAL TABLE OF CONTENT. 1. Introduction. 2. EC Documentation a) Certificate of homologation b) Declaration of conformity
OWNER'S MANUAL TABLE OF CONTENT 1. Introduction 2. EC Documentation a) Certificate of homologation b) Declaration of conformity 3. Description a) Hull identification b) Design category c) Technical data
Reckmann Furling Systems
Reckmann Furling Systems A+ Rigging Official Reckmann distrubitor Reckmann manual furlers Above Deck MF elow Deck MF/DF The manual furling systems of the MF series are the continuation of a long tradition
Keel-stepped and deck-stepped masts,
Keel-stepped and deck-stepped masts, C-sections and F-sections The T-base and deck ring systems are made to fit both Seldén s conventional mast sections and their matching furling sections. They are also
Specification of Monotype-XV Accepted 1993
Specification of Monotype-XV Accepted 1993 3. CONSTRUCTION AND MEASUREMENT RULES 3.1 FUSELAGE MAX MIN 3.1.1 Length overall 7465 7435 3.1.2 Distance from bow to mast step pivoting point(middle hole of the
The 4th generation of an icon
104S 204S 304S 404S The 4th generation of an icon For carefree sailing The fourth generation of is an uncompromising evolution of the world s best selling jib furling and reefing system. Proven design
ASSEMBLY MANUAL HOBIE CATSY
ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY
CR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
FLYING SAIL FURLERS. nex : The new generation of flying sail. furlers from Profurl
FLYING SAIL FURLERS nex : The new generation of flying sail furlers from Profurl Fast, safe and easy flying sail hoisting, and improved boat performance: this is what Profurl offers you with its range
RUDDER & TILLER HARDWARE Battlestick Tiller Extensions - Features & Information 77 Battlestick Tiller Extensions 78 Rudder Hardware 79
One of the best parts about working at Ronstan is getting to know the diverse range of sailors that we interact with every day. Whether we are talking to world-class racing sailors, a young newcomer to
CLEATS. Special cleats. 44 Barton Marine control the power
SPECIAL Special cleats CLEATS A wide range of specialised glass filled nylon cleats designed for a variety of uses onboard. Tubular cleats Available in sizes, these handy cleats have many uses where light
Hoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
Symptom: The basic symptom is your sail will not roll in or out without force. The drum unit is hard to turn. Your sail will not roll out on its own.
Schaefer 2100 roller furler drum replacement on Catalina 320 Danny Jensen, A BOA VIDA hull #972, Thanks to contributions Chris Burti, Jeff Hare and C320 group for comments Photos were taken and edited
ANCHORING and MOORING
SAILING EQUIPMENT ANCHORING and MOORING Ancoraggio e Ormeggio Accessori Vela Anchors, Chain-Anchor Connectors Pag. 02 Bungee Chains, Sail Mooring Tie, Centipede Ropes Sail Ties, Spreader Cover Pag. 07
FURLING SYSTEMS. English - Version 3 profurl.com. Jules Verne Trophy, Vendée Globe... Profurl raises the performance!
FURLING SYSTEMS English - Version 3 profurl.com 1 Jules Verne Trophy, Vendée Globe... Profurl raises the performance! RACING NEWS PROFURL HAS BEEN DOMINATING THE WORLD OF YACHT RACING! Whether it was the
Melges 32 59,950. Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs. Builder/Designer Year: 2005
Melges 32 59,950 Builder/Designer Year: 2005 Builder: Soca Sailboats Designer: Reichel/Pugh Construction: Composite Dimensions Length: 32' Beam: 3' Min Draft: 2.11' Displacement: 1769 kgs Engine Make:
Innovative german products.
R Innovative german products. Dear Customer, I started to develope the first LOOP Product in 2005. Sailing on several racing boats, I missed a strong and light Block. That was the beginning of our LOOP
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES 2005 The Bavaria Match 35 was designed in 2003 by J&J Design and was adopted as an international/recognised class in 2005xxxx. INDEX PART I ADMINISTRATION
ZINK PLATED HOOKS & CONNECTORS
574 0508 274 366 customerservices@bridoncookes.co.nz ZINC PLATED HOOKS Zinc Plated Certified.... 576 Maillon Rapides... 576 Zinc Plated Coercial.... 578 Forged Hooks.... 578 Karabiners.... 579 Trigger
Seldén offer a full range of spinnaker equipment for keelboats. It consists of five aluminium pole sections, three carbon fibre sections, low weight
56 Seldén offer a full range of spinnaker equipment for keelboats. It consists of five aluminium pole sections, three carbon fibre sections, low weight composite end fittings, telescopic whisker poles,
SELDÉN CX AND GX. Furling systems for Code 0 and asymmetric spinnakers
É CX GX Furling systems for Code 0 and asymmetric spinnakers B T R O O G G B T R O G G B T R O B T R O G G R O B T B T R O G G B T R O B T R O G G O R T T B B B T R O G G R O B T R O G G O O R R T B B
Bowsprit Hinge on "Bumble Chugger" By Robin Whittle, Shrimper 124 (Bumble Chugger) (Winter 2003)
Bowsprit Hinge on "Bumble Chugger" By Robin Whittle, Shrimper 124 (Bumble Chugger) (Winter 2003) In April 2003 Practical Boat Owner (PBO) published an article which I had written on the use of the bowsprit
Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an
By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul
Carbo Racing Foil Instruction Manual Unit 0, 1, 2, 3
Carbo Racing Foil Instruction Manual Unit 0, 1, 2, 3 WARNING!: Strictly follow all instructions to avoid an accident, damage to your vessel, personal injury or death. See www.harken.com/manuals for additional
ATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
420 Rigging Guide.
A smaller version of the olympic 470 class, the 420 was formerly a youth development class. It has a good class following, and is a good introduction to performance boats. With a PY number of 1087 it s
Safety Afloat. Before you go sailing:
RIGGING MANUAL Safety Afloat This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Please read the manual before
Tuning Guide January 2012
Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level
ASSEMBLY MANUAL. Last up-date : January 2005 HOBIE MAX RACE
ASSEMBLY MANUAL Last up-date : January 005 HOBIE MAX RACE List of the parts Necessary tools spanners nr 7 It is advisable to be at least two people to assemble the Hobie Max pair of niversal pliers TABLE
FLEXIBLE FURLER 4/6 INSTALLATION / OPERATING INSTRUCTIONS
FLEXIBLE FURLER 4/6 INSTALLATION / OPERATING INSTRUCTIONS 44 James Street, Homer, NY 13077 Tel. 607 749 4599 Fax 607 749 4604 Website: www.sailcdi.com Updated July 2006 WARNINGS READ BEFORE INSTALLING
IOM RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM 2017
INTERNATIONAL ONE METRE CLASS 2017 RIGS AND SAILS CERTIFICATION CONTROL - CHECK LIST FORM RIGS AND SAILS CONTROLLED 1 2 3 (circle, or cross out as appropriate) Hull Registration Number... Certification
ANCHORING and MOORING
SAILING EQUIPMENT ANCHORING and MOORING Ancoraggio e Ormeggio Accessori Vela Anchors, Chain-Anchor Connectors Pag. 02 Bungee Chains, Sail Mooring Tie, Centipede Ropes Sail Ties Pag. 07 Pag. 842 Spreader
LAST UPDATE: JUNI 2016 MEASUREMENT FORM GENOA / JIB / STAYSAIL
LAST UPDATE: UNI 2016 Interactive PDF Complete Information on this form will enable PRIME SAILS to design the best professinal sail for your boat. BILLING ADDRESS Full name Street, No. Phone Postcode /
RIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.
This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.
Mainz Product Catalogue
2019 Mainz Product Catalogue Stainless steel wire, fittings, hardware and tools for wire balustrades Stainless steel wire Stainless steel hardware and fittings Tools Mainz Pty Ltd Ph: (08) 92756246 www.wirebalustrades.com.au
U.S.SPARS. Operational Manual
US SPARS is a part of group Z-Spars, the world s largest spar builders. From a small shop in Paris making bows and arrows to the largest spar producing group on the planet, the Z-Spars Group is now at
Schaefer recognized this issue and they offer to replace the drum bearing assembly for $
Schaefer 2100 roller furler drum replacement on Catalina 320 Danny Jensen, A BOA VIDA hull #972, Thanks to contributions Chris Burti, Jeff Hare and C320 group for comments Photos were taken and edited
TUNE YOUR SAILS SPEED
TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best
Furling Systems for. Code0 and Gennaker. Performance Series I Competition Series. Rev. 01/2018
Furling Systems for and Gennaker Performance Series I Competition Series Rev. 01/2018 09/2017 F E Furling process 1 2 3 D C B For furling large, flying sails. The sail furls around an AT-cable, which is
HADRON H2 CLASS RULES
HADRON H2 CLASS RULES 2018 The Hadron H2 was designed in 2015 by Keith Callaghan and is manufactured under licence by Hadron Dinghies Ltd. INDEX PART I ADMINISTRATION Section A General A.1 Language...
aero naut Order No. 3009/00
aero naut Order No. 3009/00 Introduction: The model should be assembled following the sequence of the stages of construction described in these instructions. The laser-cut components are individually numbered.
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
International J/24 Class Rules Changes As approved by ISAF Effective 1 st April 2013
Class Rule 3.2.5 International J/24 Class 2012-13 Rules Changes As approved by ISAF Effective 1 st April 2013 The deck shall be fitted with two stanchions on each side, port and starboard, as detailed
Keel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL By Ian Farrier not be possible if the towing vehicle is a van. When trailering, allow extra distance for stopping. Watch also for low bridges,
Water Polo Goals. Anti Goal - FINA 1080mm CODE PRODUCT DESCRIPTION WEIGHT VOLUME. 750mm 1080mm
18 Water Polo Goals Anti Goal - FINA 1080mm Anti Goal FINA 1080 750mm 1080mm The FINA approved Anti Goal sets the standard for international Water Polo competetion equipment and is used extensively in
Schaefer s New Mainsail Furler Answers All Your Questions
Boom Furler FAQ s Schaefer s New Mainsail Furler Answers All Your Questions Q: Why put a mainsail furler on your boat? A: Contemporary mainsail furlers allow you to: Shorten sail without leaving the safety
SHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
COASTAL IN-BOOM FURLING SYSTEM. Installation Manual
COASTAL IN-BOOM FURLING SYSTEM Installation Manual 1 TABLE OF CONTENTS Page Number 3. Disclaimer 4. Components packing list & required tools 5. Gooseneck bracket location 6. Installation sail track 7.
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for
2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions
SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit
Section 12. Chassis Equipment
AUSTRALIAN Section 12 S-12 Chassis Equipment Jockey Wheels & Stands U Bolts Jockey Wheel Receivers Brake Kits Bearings Axles Springs Adjustable Legs Permanent Fixed Steps Ladders Jerry Can Holders Jerry
PORTABLE CAPSTAN WINCHES LINE-UP
PORTABLE CAPSTAN WINCHES LINE-UP P a g e 2 PCW5000 APPLICATION: PULLING ENGINE: 4-STROKE HONDA GXH-50 cc CAPACITY: MAX. PULLING FORCE: 1000 kg SPEED WITH: 57 mm DRUM: 12 m/min 85 mm DRUM: 18 m/min WEIGHT
Security and confidence at height.
A Security and confidence at height. Vertical Systems DISTRIBUTED BY M DBI-SALA Vertical Systems are designed to complement your ability to work while meeting all applicable OSHA and ANSI standards. Vertical
Dear Tennis friends. Furthermore we offer: fair prices reliable delivery times technical know-how high product quality
Promotion Dear Tennis friends in our new catalogue you find all items to equip your tennis court in a professional way and to create ideal conditions for training and match. Please trust to our know-how
nex : The new generation of flying sail
FLYING SIL FURLERS nex : The new generation of flying sail furlers from Profurl Fast, safe and easy flying sail hoisting, and improved boat performance: this is what Profurl offers you with its range of
Forestay fittings and halyard routing
Festay fittings and halyard routing Cutter stay on masthead rigs On fractional rigs the festay fitting is either fitted directly on to the mast combined with the halyard box (Seldén combi boxes). The festay
RIGGING SERVICES AND PRICE LIST
RIGGING SERVICES AND PRICE LIST Mast Stepping RIG 100 FULL SERVICE Build, clean and step rig. Static tune to approx. sailing tension. Rig boom and control lines, run halyards. Make electrical connections
Follow these easy steps to properly assemble your new Zim 420
Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other
10.2. Basketball Single Post System
Basketball Basketball Single Post System The basketball single post is made from special aluminium profiles. The structure is supported by one post in the ground. The post measures a cross section of 120
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw
BoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications
BoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications David Halladay BoatSmith Inc. info@boatsmithfl.com 561.632.2628 15 March 2013 LOA: 48 ft 2 in BOA: 22 ft LWL: 41 ft 6 in Weight:
Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18. ASSEMBLY MANUAL : HOBIE CAT 14 Std & Race HOBIE CAT 14 STD & RACE
Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 1/18 HOBIE CAT 14 STD & RACE Ref :MMHC14SR_GB Emetteur :MF Date :Dec 2014 Revision : 1 Page 2/18 TABLE OF CONTENT Part list... 3 Ropes and
J/97 One-Design Class Rules for the UK and Ireland
J/97 One-Design Class Rules for the UK and Ireland 1.0 Objectives 1.1 These J/97 Class Rules are to preserve J/97's recreational features, including ease of handling, low cost of ownership, safety, comfort,
Weta Basic Rigging Guide
Weta Basic Rigging Guide A quick reference guide of how to rig your Weta, with some tips to make rigging quick and easy! For a more indepth guide see our Weta Manual under Weta Owners on the website. 1.
Miller DuraHoist Safety Systems
Portable Confined Space System designed for manhole and confined space entry/ retrieval and fall arrest applications. Portable Fall Arrest Post provides three independent swivel tie-off points for fall
2009 Trade catalogue
2009 Trade catalogue Products & references Nautix Windsurf Accessories Zi des Cinq Chemins - 56520 Guidel - France Tel: +33.2.97.65.32.69 - Fax: +33.2.97.65.03.54 info@nautix.com - www.nautix.com 1) BOOMS
MUSTO PERFORMANCE SKIFF
INTERNATIONAL MUSTO PERFORMANCE SKIFF CLASS RULES 2012 The Musto Performance Skiff was designed in 1999 by Dr Joachim Harpprecht and was adopted as an International class in 2007. Musto Performance Skiff
M32 CATAMARAN ASSEMBLY MANUAL
M32 CATAMARAN ASSEMBLY MANUAL 1 M32 CATAMARAN ASSEMBLY MANUAL MANUAL SUMMARY M32 ASSEMBLY Parts and tools Instructions MAST PLATFORM Parts and tools Instructions MAST STEPPING Instructions MAIN HALYARD
Volleyball. Order online at
Volleyball A great range of competition and practice volleyball posts to suit any school, college or sports centre, a full installation service is available for wall fixed posts and floor fixings, please
FARR 280-SPECIFICATION
FARR 280-SPECIFICATION Page 1 of 5 Specifications Length Overall Length Waterline Beam Keel Draft Displacement Keel Weight 8.72 m / 28.6 ft. 8.02 m / 26.3 ft. 2.87 m / 9.4 ft. 2.1 m / 6.89 ft. 1600 kg
Order No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
Proven Design, Performance & Reliability
FLYING SAIL FURLERS Proven Design, Performance & Reliability Ronstan s Flying Sail Furlers have been developed over recent years for use by some of the world s top racing syndicates. Encouraged by their
Flagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
1 MAY A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand
1 MAY 2011 A division of Rolly Tasker Sails (Thailand) Co Ltd., 84/2 Moo 2, Chaofa Road, T. Vichit, A. Muang, Phuket 83000, Thailand STORAGE FOR SAIL PARTS CNC MACHINE CENTRE 1 1 DEADEYE ID 19 mm. 6C
1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
Making Spars for the Schooner Jeanette
Making Spars for the Schooner Jeanette..... by Byron Rosenbaum Figure 1. Byron Rosenbaum s 1:16-scale radio-controlled model of the schooner Jeanette. All photographs by the builder. The spars required
MASTS AND SAILS. February 2015
RIGGING SERVICES AND PRICELIST 2015 MAST STEPPING FULL SERVICE $14.00/boat ft + $20.00 STEP AND TUNE ONLY $12.00/boat ft + $20.00 STEP ONLY $10.00/boat ft + $20.00 MIZZEN MAST As above at half boat ft
OPERATIONAL CHECK LIST
www.spinnakersailing.com (650) 363-1390 OPERATIONAL CHECK LIST https://twitter.com/#!/spinnakersailin http://www.facebook.com/spinnakersailingrwc http://www.spinnakersailing.com/newsletter.html Dear Sailor,
Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade
Appendix 1: How To Install the Northeaster Dory Sailing Component Kit Upgrade 143 Northeaster Dory Sailing Rig Upgrades: Adding sail track, an outhaul, and camcleats for the jib We ll start with the mast.
SPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt
CLIENT NAME: LOCATION: CALM BUOY INSPECTION:
INSPECTOR REVIEWED INSPECTION OF CALM BUOY OVERALL PHOTO REVISION DESCRIPTION: Preliminary / Final Page: 1 TABLE OF CONTENT 1. MANAGEMENT SUMMARY... 3 1.1. SCOPE OF WORK:... 3 1.2. CORRECTIVE ACTIONS...
AMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2011 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
Table of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7
Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Placing the
QuikVang. The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40
QuikVang The Original High-Performance Vang INSTALLATION AND OPERATING INSTRUCTIONS MODEL D-30 MODEL D-40 33 Broadcommon Road, Bristol, RI 02809 USA T: 401.253.4858 F: 401.253.2552 www.hallspars.com 1
Setup &Tuning guide. Updated 1st February 07
Setup &Tuning guide Updated 1st February 07 Boat preparation Tape a piece of batten to the backstay ram with a calibrated scale drawn on it. This will allow you to reproduce the same backstay settings
Retractable Security Cover for a Swim Spa
Parts List Retractable Security Cover Kit 3" PVC pipe Leading edge Cover Track (pre-attached to Swim Spa) Optional cover pump (for outdoor installations) Rocky Roller Kit 2 Roller A-Frame Brackets 1/2"