PRAYAAG TECHNOLOGIES 4/19, PARTHASARATHY STREET, AYYAVOO COLONY, CHENNAI , SOUTH INDIA
|
|
- Madeline Ross
- 5 years ago
- Views:
Transcription
1 PRAYAAG TECHNOLOGIES 4/19, PARTHASARATHY STREET, AYYAVOO COLONY, CHENNAI , SOUTH INDIA GOWIN S CABLE BLOWING MACHINE SERIES 1020 PRODUCT LITEREATURE
2
3 GOWIN 1020 SERIES AT GLANCE
4 KNOW ABOUT OUR BLOWING MACHINE AIR CHAMBER TOP AND BOTTOM UNIT TOP SIDE CABLE DRIVE UNIT CABLE DRIVE SLOT BOTTOM CABLE DRIVE UNIT AIR MOTOR DUCT CLAMMPING CLAW ALLUMINIUM STAND CABLE DRIVE CLAMMPING STUDS DUCT PRESSURE GUAGE AIRCHAMBER CLAMMPING STUDS
5 Gowin, s Cable Blowing Machine Series Actual Image
6 M A C H I N E A T W O R K S I T E
7 Connection lay out for the blowing machine with FRLS and Air compressor ( 400 CFM, 10 Kg/ Bar ) ( Note; some FRLS models the moisture remover may be built in with filter unit and may not be visible )
8 Accesssaries for blowing machine Aluminium Split Cpoulers ALUMINIUM SPLIT COUPLERS WITH QUICK FIX The Aluminium Split Couplers used at Optical Fibre Cable blowing operations to connect the underground laid OFC duct to couple with cable blowing machine at ground level or at convenient locations,or at when the regular coupling joints may burst during the course of blowing, are made of high grade aluminium alloy, can withstand fungus attacks and corrosion free, its typical design, very convenient to use at work sites, very simple to fix and remove at trench depths or man holes, no spanners required, just small 10 mm lever is enough to fix. Comes in size 40 mm X 40 mm, 50mmX50mm, 32mmX32mm also 40mmX32mm, 40mmX50mm, 50mmX32mm.
9 D I T ( Duct Integrity Test Apparatus) Duct Integrity Test apparatus can be conveniently used for testing of various parameters like duct alignment, air tightness test, shuttle test and also useful for cleaning before installations of O F C in Plb/ silicore ducts of various diameter 32mm,40mm and 50mm with safer environment. Can Blow rope inside the duct to enable manual pulling of OFC for shorter distance and emergencires (Available On Demand) Not part of Package
10 Rubber U seals and Roller Plier Cable U seals used to arrest air leakage from air chamber while cable moves in the duct. Available for Various diameters Circlip Plier for fixing spacers accordingly for the different cable sizes and box spanner to fix air chamber Circlip plier Box Spanner
11 TOOLS AND SPARES FOR BLOWING
12 Technical Information 1. The Equipment is made up of all aluminium alloy metal 2. High torque high R P M pneumatic power drive system fitted to run the cable push rollers 3.pneumatic power drive system consumes air 4 cfm at 7.5 Kg bar pressure 4.Equipment weighs 36 Kgs and physical die mentions : Length : 750 mm, Width : 400 mm and height : 400 mm 5.Separate FRLS attachment provided with stand to feed moist free, lubricated air to pneumatic power drive system. 6. The equipment can blow O F Cable at an velocity 90 meters per minute at normal & good ducting conditions. 7.Machine can blow O f Cable of size 10 mm dia to20 mm dia of any configuration armoured or unarmoured Products salient Features Machine weighs only 35 kgs, it is very easy to shift from one work point to other point easily Since operation of equipment controls only two levers, no dedicated operator required Semi skilled person can learn and operate the machine No cumbersome connections and power pack, fuel arrangements required. Predetermined cable rollers to fit cable diameter ensures no damage to the cable at an abnormal blowing conditions or sudden block of cable.
13 Machine can blow O F C at an velocity of 90 meters per minute at an normal and good ducting condition. The maximum Chamber to chamber distance of blowing is depends upon various parameters like ducting conditions and plb duct friction ratio ( lubrications) However if the ducting parameters are good the machine can blow OFC at 1500 meters from blowing point to exit. If the duct lube lubricants were used the blowing distance will be more and cable moves into duct with lessor friction. THE FOLLOWING CAPACITY OF AIR COMPRESSOR PORTABLE DIESEL DRIVEN IS NEEDED TO OPERATE BLOWING MACHINE. FOR DUCT SIZES 32 MM 10.5 KG/BAR-350 CFM FOR DUCT SIZES 40 MM 10.5KG/BAR-400 CFM FOR DUCT SIZES 50 MM 12.0KG/BAR-450 CFM NOTE : C F M ( CUBIC FEET PER MINUTE)
14 For any technical clarifications and suggestions contact Venugopal Dayalan C E O / Technical Prayaag Technologies 4/19, parthasarathy Street, chennai , South India E Mail: dayalan@prayaag.co.in Mobile : Web :
P/N for 1.25" SDR P/N for 1.50" SDR P/N for 2.00" SDR
CABLE OVERBLOWING JUNCTION BOX OPERATION & MAINTENANCE MANUAL P/N 89066 for 1.25" SDR P/N 89067 for 1.50" SDR P/N 89068 for 2.00" SDR Copyright 2017 by All rights reserved. No part of this publication
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationSEMEMI SQA Unit Code H2B7 04 Assisting in the installation of compressed air equipment
Assisting in the installation of compressed air equipment Overview This unit identifies the competences you need to assist in the installation of compressed air equipment and systems, in accordance with
More informationFUNDAMENTALS OF PRESSURE REGULATORS ROBERT BENNETT MANAGER OF TRAINING ELSTER AMERICAN METER
FUNDAMENTALS OF PRESSURE REGULATORS ROBERT BENNETT MANAGER OF TRAINING ELSTER AMERICAN METER SUPPLY = DEMAND FUNCTION OF A REGULATOR A regulator may be defined as a "mechanism for controlling or governing
More informationRight-Angle Tube Roller Model
SPECIFICATIONS Model no. Free Speed (RPM) Throttle Rotation Max. Torque Ft-Lb Air Pressure psi Air Inlet Hose Air Flow @Free Speed Spindle Weight 909-1700 95 Lever type Reversible 240 90 1/2 NPT 1/2 I.D.
More informationFIBERGLASS MULTI-GARD MULTI-CELL RACEWAY
FIBERGLASS MULTI-GARD MULTI-CELL RACEWAY Heavy Wall Bullet Resistant Bends Terminators Couplings Adapters Expansion Joints Epoxy Kits Spacers 23240 Chagrin Blvd Suite 405 Cleveland, OH 44122 216-464-3400
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationVertex VP Operation and Maintenance
AIRBENCH LTD Vertex VP Operation and Maintenance This Edition: 2 October 2018 AirBench Ltd, 14 Grange Farm Road, Colchester CO2 8JW www.airbench.com +44 (0) 1206 791191 Copyright AirBench Ltd 2016 Page
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationAPT Electrofusion Ducting
APT Electrofusion Ducting Installation Guide Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608 838 6433 www.franklinfueling.com Safety Important!
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationWork Standard CABLE PULLING OPERATIONS
Page 1 of 19 ****This document supercedes BECo WMS 2.9-1.1**** 1.0 Purpose CABLE PULLING OPERATIONS 1.1 This Work Method Standard prescribes the preferred methods of removing and installing cables between
More informationSuperwinch DC Electric & Hydraulic Winches Each winch data sheet comprises of two pages. HUSKY PRO 12v & 24v
TM TM Superwinch DC Electric & Winches Each winch data sheet comprises of two pages 12v & 24v DC Electric Winches HUSKY PRO 12v & 24v 2.5 Tonne Winches - 2.5 Tonne to 6 Tonne H9W 2.5 Tonne H8 & H10 3.56
More informationJ138RSH and J150RSH 3/8" J138RSH 1/2" J150RSH. 3/8" Drive Sealed Head Ratchet 1/2" Drive Sealed Head Ratchet. Operation and Maintenance Manual WARNING
J138RSH and J150RSH Operation and Maintenance Manual 3/8" J138RSH 1/2" J150RSH WARNING To reduce the risk of injury, read and understand these safety warnings and instructions before using the tool. Keep
More informationPTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
More informationHand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual
More informationAtlas Copco Tools & Assembly Systems. Air Line Accessories Optimizers- FRL
Atlas Copco Tools & Assembly Systems Air Line Accessories Optimizers- FRL MIDI Optimizer FRL Why use an Atlas Copco FRL? Atlas Copco filters, regulators, and lubricators are designed to help you get maximum
More informationMAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL.
MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. INDEX DESCRIPTION PAGE (1)SPECIFICATION 2 (2)OUTSIDE DIMENSION LAYOUT 3 (3)INSPECTION REPORT 4 (4)PREPARATION FOR OPERATION 5 4-1.LUBRICATING
More informationRocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
More informationSTATIONARY TRUCK INTERNAL HALYARD V-CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL INSTALLATION READ ALL INSTRUCTIONS BEFORE PROCEEDING
9390 South 300 West, Sandy, Utah 84070 801-562-0123 800-782-0500 ColonialFlag.com STATIONARY TRUCK INTERNAL HALYARD V-CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL INSTALLATION READ ALL INSTRUCTIONS BEFORE
More informationVTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
More informationInsert Ring. Protection Ring from Tube Deformation. Protect tubes from deformation. Ultra soft tube is connectable to Fitting.
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Protection Ring from Deformation Insert Ring 668 Protect tubes from deformation. Ultra soft tube is connectable to Fitting. Necessary for the connection
More informationVACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationCHAPTER 1. DESCRIPTION AND COMPONENTS This chapter describes the weapon and the types of ammunition in detail and provides a table of general data.
CHAPTER 1 DESCRIPTION AND COMPONENTS This chapter describes the weapon and the types of ammunition in detail and provides a table of general data. 1-1. DESCRIPTION The M249 AR is a gas-operated, air-cooled,
More informationWire rope lubrication system. Increases wire rope life and reduces lubrication time, lubricant waste and environmental contamination
Wire rope lubrication system Increases wire rope life and reduces lubrication time, lubricant waste and environmental contamination Importance of lubrication The use of lubricant on a steel wire rope considerably
More informationShifting Lever. RAPIDFIRE Plus 11-speed
(English) DM-SL0005-04 Shifting Lever Dealer's Manual RAPIDFIRE Plus 11-speed MTB XTR SL-M9000 DEORE XT SL-M8000 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY... 4 LIST OF TOOLS TO BE USED... 7 INSTALLATION...
More informationH11.13 PIVOTS SERIES 490 H11 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H11 HORIZONTAL AND VERTICAL PIVOT WINDOWS SERIES 490 01.07.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com SERIES 490 CONTENTS
More informationRCV-125 REMOTE CONTROL SYSTEM IMPORTANT WARNING FOR SAFER BLAST CLEANING
OWNER S MANUAL RCV-125 REMOTE CONTROL SYSTEM IMPORTANT WARNING FOR SAFER BLAST CLEANING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved
More informationModel No Product Name Handpiece Only Complete System
Ney QC 700 E 30,000 RPM IECE 30,000 R N HANDPIE IVEN HA R DRIV AIR D Owner & Operator's Manual Model No Product Name 7201326 Handpiece Only 7201325 Complete System Description Page Safety... 2 Setup...
More informationC-Line Electrical Connectors
C-Line Electrical Connectors Product Catalog (417) 532-7121 PO Box 908 722 Durham Rd Lebanon, MO 65536 Manufactured by: PO Box 908 722 Durham Rd Lebanon, MO 65536 Company Information C-Line Electrical
More informationThe Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times
Tseries Series AB AB Air Air Boosters Boosters The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times.01/1 MANIFOLD MOUNTED VALVES FOR EASY SERVICING
More informationTECHNICAL BULLETIN PINPOINT CONDUIT COUPLING AND SPLICING RECOMMENDATIONS
TECHNICAL BULLETIN PINPOINT CONDUIT COUPLING AND SPLICING RECOMMENDATIONS CONTENTS: 1.0 General Information 2.0 Preparation and Splicing of PinPoint Wire 3.0 PinPoint Direct Bury Splice Kit Specifications
More informationRARS5000 AIR BODY SAW OWNER S OPERATING MANUAL
RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the
More informationCrab and Lobster Live Holding System Part II (Water Pumps, Air Pumps and Pipework)
Crab and Lobster Live Holding System Part II (Water Pumps, Air Pumps and Pipework) 1990/2/SF/AM The increased demand for crabs and lobsters, and the requirement to export live shellfish has led to the
More informationPressure switch and Thermostat CAS
Data sheet Pressure switch and Thermostat CAS The CAS Series consists of a series of pressure controlled switches and temperature controlled switches. In this series, special attention has been given to
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationNEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
More informationC MICRO-DUCT TUBE BLOWING MACHINE
OPERATOR MANUAL C-1250-02 MICRO-DUCT TUBE BLOWING MACHINE Copyright 2017 by CBS Products (KT) Ltd All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever
More information3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM EN
TURNBACK FERRULES T ferrule TKH ferrule 3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM EN 134113 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for
More informationIntroduction. Key features of the Viper Maxi MKII WRL include:
Page 1 Index Page 2 Viper Introduction... 3 The Viper Wire Rope Lubricator Kit components.... 4 Viper Kit components assembled and numbered.. 5 Assembly instructions... 6-8 Ratchet Strap instructions.
More informationStep 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the seam joint is.
WhiplashGV Instruction Manual Email: Brian@Blazermarine.com Phone: 513-598-1769 Step 1: Block sand the transom to remove the seam joint. The end result should be a flat transom without a ledge where the
More informationHomestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationCABLEGRIPS GALVANISED STAINLESS ARAMID FOR QUICK AND EFFICIENT CABLE INSTALLATION AND SUPPORT
CABLEGRIPS GALVANISED STAINLESS ARAMID FOR QUICK AND EFFICIENT CABLE INSTALLATION AND SUPPORT CABLEGRIPS FOR QUICK AND EFFICIENT CABLE INSTALLATION AND SUPPORT slingco hand woven cable grips Cable grips
More informationOsborne Engineering Limited. OEJ Equalised thrust bearing internals
Osborne Engineering Limited OEJ Equalised thrust bearing internals General Description The Osborne Equalised J style thrust bearing assembly operates by generating and maintaining a substantial oil film
More informationTube Cutter with Measuring tape built-in
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Cutter with Measuring tape built-in 658 Series Cutter TUBE VALVE CONTROLLER FITTING Model Code of Cutter (Example) Cutter Model Code of Cutter Blade (Example)
More informationTube for Clean Environment Polyurethane Tube Clean-Room Package
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Clean Environment Polyurethane Clean-Room Package 642 Fine Flexibility. Suitable for Small Bending Radius in General Pneumatic Piping. Cleaned and
More informationBase engine for use in U.S., the U.S. Territories, and Canada
210G / 210G LC 12 13 Engine 210G / 210G LC Base engine for use in U.S., the U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
More informationDaily Investment on Pneumatic Conveyor
Daily Investment on Pneumatic Conveyor Pallav Chanakya Biswas Semester:- 7 th Roll no :- B03 / Session: 2017-18 Abstract:- Every pneumatic system, makes use of pipes or ducts called transportation lines
More informationAIRLINE-SERIES HELMET AIR FILTER
OWNER S MANUAL AIRLINE-SERIES HELMET AIR FILTER IMPORTANT WARNING FOR SAFER BLAST CLEANING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved
More informationGENTLE AIR BLOWN FIBER BLOWING MACHINE
GENTLE AIR BLOWN FIBER BLOWING MACHINE WITH CLUTCH for Round Fiber OPERATION & MAINTENANCE GENTLE AIR USA CABLE BLOWING MACHINE Copyright 2018 by QC Final Inspection by: Date: Unit Serial Number: Build
More informationTypical Strength of Glued Connection. Typical Strength of Screwed Connection
Rodder Introduction DCD offers one of the most comprehensive range of Rodders available anywhere in the world - from the smallest 1/8 dia. Fish Tapes to the rugged 1/2 Rodders. The Rod DCD rods are manufactured
More informationPrice List January SECUROPE Life Line
4, rue des Etangs L-7303 Steinsel email :marketing@fallprotec.com Fax : +352 26 36 08 41 Tel : +352 26 55 09 30 Price List January 2009 SECUROPE Life Line Code N Quantity for 1 system Designation Unit
More informationSeries Environmental Chambers
3119-600 Series Environmental Chambers Challenges in Non-Ambient Testing Testing at non-ambient temperatures adds another layer of challenges to your testing laboratory. Ensuring you get accurate and stable
More informationPneumatic Wet Sander. (4,500 rpm) Operation Instruction
Pneumatic Wet Sander (4,500 rpm) Operation Instruction ON / OFF Safety Lever Features ON / OFF 4 6 3 5 2 5 3 6 7 4 Safety Lever 2 8 Rubber Sleeve Ergonomic handle comforts the users hand, its excellent
More information4-7 kw/ hp. Dual Output Compressors (Air/Nitrogen) Driving Nitrogen Forward
GN 4-7 kw/5.5-10 hp Dual Output Compressors (Air/Nitrogen) Driving Nitrogen Forward Total capability, total responsibility Right at the heart of your business, Atlas Copco delivers quality compressed air
More informationBoatWasher Swede, , MS Float
BoatWasher Swede, 400-600, MS Float Cleans the hull from algea, barnacles and other fouling. Cleans both motor- and sailing yachts. Three sizes of washers fits most boat types, up to approximate 25-meter
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationPTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
More informationHIRE EQUIPMENT LIST. 110 or 240 volt Electric single phase unit, 8 145psig. Diesel driven unit, 150psig c/w HP cylinder reserve.
BREATHING AIR EQUIPMENT Mobile Breathing Air Units F9 BA20D BA25D BA50D BA60D 110 or 240 volt Electric single phase unit, 8 cfm @ 145psig. Diesel driven unit, 20cfm @ 150psig c/w HP cylinder reserve. Diesel
More informationMANUAL SEALLESS STEEL STRAPPING TOOL MODEL A
OPERATION MANUAL / SPARE PARTS LIST MANUAL SEALLESS STEEL STRAPPING TOOL MODEL A337.0001 13.1912.01 13191201.en/MAS/ 10.02 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 WARRANTY CONDITIONS AND LIABILITY 4 3 APPROPRIATE
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
More informationINSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN
INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l
More informationPilot HON 630a, HON 640
product information serving the gas industry worldwide pplication, characteristics, technical data pplication pilot for gas pressure regulators HON 0, HON 0, HON 0, HON 0 suitable for natural gas and all
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationPart # Balanced SCUBA Regulator Assembly for M-48 SuperMask and MOD-1 Installation Guide
KIRBY MORGAN Kirby Morgan Dive Systems, Inc. Part #200-125 Balanced SCUBA Regulator Assembly for M-48 SuperMask and MOD-1 Installation Guide Part Number Description Qty 200-120 Balanced SCUBA Regulator
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 11 AIR COMPRESSORS AND DISTRIBUTION SYSTEM The material needed for outcome 2 is
More informationModel Air Caddy Orig TABLE OF CONTENTS
92-0919 Orig. 020201 Model 75-0114 Air Caddy TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 SPECIFICATIONS 7 MAINTENANCE 9 INSTALLATION AND OPERATION 11
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
More informationUnderground Cable Installation Practices
Underground Cable Installation Practices Install 05 (previously MP 1008 Issue 2) Issue #3 August 2016 1 of 12 UNDERGROUND CABLE INSTALLATION PRACTICES CONTENTS PAGE 1. General... 2 2. Precautions... 3
More informationBRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx
Reference number: BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS DESIGNATED USE The brake winch RUP 503-[...]T series is a load lifting / lowering device. Device is equipped with safety brake for
More informationMARINE FABRICS. Fishing Net Machines
Fishing Net Machines Fishnets are essential to Catch Fish. The nets on use get worn-out/ torn. The fishermen have then to replace these nets. There is thus Continuous Recurring Demand. Hence wherever there
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk SOFTLINE CUTTER SL80 PRODUCT CODE No. 980248 INSTRUCTIONS FOR INSTALLATION,
More informationSINEO Microwave Digestion Core Technology (2012)
SINEO Microwave Digestion Core Technology (2012) Ⅰ. Technology of Vessel: 1. Composite fiber outer vessel In recent years, the application of composite fibers is becoming increasingly popular, and it is
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationPremium Auto Feed System. Products and Solutions for Assembly
Premium Auto Feed System Products and Solutions for Assembly ASG Automation Product Group Engineered Performance The ASG Automation group provides pre-engineered and custom solutions to meet the comprehensive
More informationOWNER S TECHNICAL MANUAL
EL SERIES OWNER S TECHNICAL MANUAL DP7002 1 Air Operated Diaphragm Pump Description The DP7002 1 air operated diaphragm pump is the ideal device for the pumping, transfer and dispensing of chemical liquids,
More information30T A/Manual Hydraulic Shop Press
30T A/Manual Hydraulic Shop Press Operation Manual 1 1. Important Information 1.1 Safety Information 1.1.1 Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when
More informationM-14 Stern Shaft Sealing Apparatus
Guideline No.M-14 (201705) M-14 Stern Shaft Sealing Apparatus Issued date: May 9,2017 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
More informationSCUBAPRO. Balanced Power Inflator
SCUBAPRO Balanced Power Inflator USE THIS GUIDE AS A REFERENCE WHEN SERVICING THE BALANCED POWER INFLATOR Important note: The following information is not designed to be a complete training guide for servicing
More informationWIRE ROPE PULLING MACHINE
WIRE ROPE PULLING MACHINE Spare parts list and exploded view Specifications Dimensions Item No. 0.8T 1.6T 3.2T 5.4T Rated Capacity kg 800 1600 3200 Rated Forward Handpower N 343 441 441 Rated Forward Travel
More informationSG-7R46 SG-7R45 BR-IM41-R CJ-7S40 WARNING CAUTION SERVICE INSTRUCTIONS. Inter-7 Hub. Inter-M Brake Cassette joint NOTE:
t WARNING It is important to completely understand the operation of your bicycle's brake system. Improper use of your bicycle's brake system may result in a loss of control or an accident, which could
More informationOperating Manual. --N5021 Wide Crown Stapler--
Operating Manual --N5021 Wide Crown Stapler-- NOTE: Please read and fully understand the instructions in this manual before operating the pneumatic power tool. Carefully read through this OPERATOR'S MANUAL
More informationSUPPLEMENT TO AIRCRAFT FLIGHT MANUAL FOR MOTOR-DRIVEN ROPE WINCH TYPE RPM 11/01
SUPPLEMENT TO AIRCRAFT FLIGHT MANUAL FOR MOTOR-DRIVEN ROPE WINCH TYPE RPM 11/01 (Langenthaler-Winch) Aircraft-Manufacturer: Avions Robin SA Type of Aircraft: Robin DR 300-180R DR400-180R DR 400-200R DR
More informationOPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS
OPERATOR S MANUAL FOR AirVANTAGE 10,000 OPM 3 x 4 in. (75 x 110 mm) ORBITAL SANDERS Declaration of conformity AirVANTAGE Tools 10018 Lower Azusa Road, Unit #C; El Monte, California 91731 USA declare on
More informationRear Drive System SERVICE INSTRUCTION. Specifications SI-R670B
- SERVICE INSTRUCTION SI-R670B t Rear Drive System Before use, read these instructions carefully, and follow them for correct use. In order to realize the best performance, we recommend that the following
More informationproduct manual HM-4140, HM-4150, HM-4160 HM-4160A HM-4150 Humboldt FlexPanels
12.09 product manual HM-4140, HM-4150, HM-4160 HM-4160A HM-4150 Humboldt FlexPanels Introduction: This manual covers the installation and operation of Humboldt FlexPanels for Triaxial and Permeability
More informationSF SERIES CNG COMPRESSOR MODEL HF-4MH. 4 Nm3/Hour Displacement OPERATION MANUAL
SF SERIES CNG COMPRESSOR MODEL HF-4MH 4 Nm3/Hour Displacement OPERATION MANUAL 1 Content 1. General Description...3 2. Main technical parameters...3 3. Structural principle...4 3.1Main structure...4 3.2Compressor
More informationInformation Sheet. About this information sheet. Floor and wall loadings. Attachment of process module to floor. PlasmaPro Estrelas100
Information Sheet PlasmaPro Estrelas100 About this information sheet This data sheet provides basic information about the installation of a PlasmaPro Estrelas100 tool. Some of the information in this sheet
More informationAccessories. Model F7.5 FIBER OPTIC CABLE PLACING EQUIPMENT SHERMAN & REILLY, INC.
Model F7.5 FIBER OPTIC CABLE PLACING EQUIPMENT Parts & Accessories SHERMAN & REILLY, INC. P.O. Box 11267 400 West 33rd Street Chattanooga, TN 37401 USA Phone 423 756 5300 Fax No. 423 756 2948 Toll-free
More informationFTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
More information2019 MADONE ASSEMBLY MANUAL
2019 MADONE ASSEMBLY MANUAL 2019 MADONE Rim brakes and Di2 drivetrain Rim brakes and mechanical drivetrain Disc brakes and Di2 drivetrain Disc brakes and mechanical drivetrain TABLE OF CONTENTS Common
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are
More informationIntroduction to Pneumatics
Introduction to Pneumatics Pneumatics Symbols Air generation and distribution Table 1: Symbols use in energy conversion and preparation ITEM SYMBOL MEANING Compressor SUPPLY Pressure Source Pneumatic Pressure
More informationMANUAL REEFING SYSTEMS
MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationCOMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING
INCH-POUND 2 July 2010 SUPERSEDING A-A-55826 5 September 1996 COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING The General Services Administration has authorized the use
More information