; (not for sale);

Size: px

Start display at page:

Download "; (not for sale);"

Clifton Lamb
5 years ago
Views:

1 1. PRODUCT AND COMPANY IDENTIFICATION Product name : REVERT Total Protein Stain 100 ml; REVERT Total Protein Stain 250 ml Part Number(s) : ; (not for sale); Lot Number : Brand : LI-COR Supplier : LI-COR, Inc Superior Street P.O. Box 4425 Lincoln, NE USA Telephone : (402) Toll Free Number : (800) Fax : (402) Emergency Phone # Information : 24 Hour Phone (CHEMTREC) (800) (215) Preparation Information : LI-COR, Inc. (800) HAZARDS IDENTIFICATION Emergency Overview GHS Classification in accordance with 29CFR 1910 (OSHA HCS) Skin irritation (Category 2), H315 Serious eye damage (Category 1), H318 Acute aquatic toxicity (Category 3), H402 For the full text statements mentioned in this Section, See Section GHS Label elements, including precautionary statements Pictogram : Signal word : Danger Hazard Statement(s) H315 H318 Precautionary statement(s) P260 P264 P273 P280 : Causes skin irritation : Causes serious eye damage. : Do not breathe mist, vapors, spray : Wash skin thoroughly after handling : Avoid release to the environment. : Wear protective gloves/eye protection/face protection Page 1 of 7

2 P305+P330+P331 P302+P352 P305+P351+P338 P310 P322+P313 P362 P501 : IF SWALLOWED: rinse mouth, Do NOT induce vomiting : IF ON SKIN: Wash with plenty of soap and water. : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. : Immediately call a POISON CENTER or doctor/physician. : If skin irritation occurs: Get medical advice/attention : Take off contaminated clothing and wash before reuse. : Dispose of contents/container to an approved waste disposal plant. HMIS Classification Health hazard: 2 Flammability: 0 Physical hazards: 0 NFPA Rating Health hazard: 2 Fire: 0 Reactivity Hazard: 0 3. COMPOSITION/INFORMATION ON INGREDIENTS Component Classification Concentration Acetic Acid Water Skin Irrit. 2, H315 Eye Dam. 1, H318 <10% >90% 4. FIRST AID MEASURES General advice Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Do NOT induce vomiting. Immediately call a physician. 5. FIREFIGHTING MEASURES Conditions of flammability Page 2 of 7

3 Not flammable or combustible. Suitable extinguishing media Foam. Dry power. Carbon dioxide, Water spray. Sand. Unsuitable extinguishing media Do not use a heavy water stream. Special protective equipment for firefighters Wear self-contained breathing apparatus for firefighting if necessary. Hazardous combustion products Hazardous decomposition products formed under fire conditions. Corrosive vapours. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate unnecessary personnel Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Notify authorities if liquid enters sewers or public waters. Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of in accordance with local regulatory guidelines. Keep in suitable, closed containers for disposal. Store away from other materials. 7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapor or mist. Wash exposed skin thoroughly after handling. Wash contaminated clothing before reuse. Conditions for safe storage Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Contains no substances with occupational exposure limit values Personal protective equipment Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Page 3 of 7

4 Full contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 mm Eye protection Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin and body protection Impervious clothing; the type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Hygiene measures Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Color Safety data Liquid Green ph 2-3 Melting point/freezing point Boiling point Flash point Ignition temperature Auto ignition temperature Lower explosion limit Upper explosion limit Vapor pressure Density Water solubility soluble Partition coefficient: n-octanol/water Relative vapor density Odor Odor Threshold Evaporation rate 10. STABILITY AND REACTIVITY Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions Reacts violently with (some) bases: release of heat Page 4 of 7

5 Conditions to avoid Sources of ignition. Direct sunlight Materials to avoid Strong oxidizers, metals. Strong bases. Hazardous decomposition products Other decomposition products-carbon monoxide. Carbon dioxide. Thermal decomposition generates: Corrosive vapours. 11. TOXICOLOGICAL INFORMATION Acute toxicity Oral LD50 Inhalation LC50 Dermal LD50 Other information on acute toxicity Skin corrosion/irritation Causes skin irritation, causes serious eye damage.serious eye damage/eye irritation Eyes: Causes serious eye damage. Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity IARC: ACGIH: NTP: OSHA: Reproductive toxicity Teratogenicity No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. Specific target organ toxicity - single exposure (Globally Harmonized System) Specific target organ toxicity - repeated exposure (Globally Harmonized System) Page 5 of 7

6 Aspiration hazard Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Liver-Irregularities-Base on Human Evidence (Anionic Surfactant) Synergistic effects Additional Information RTECS: Not available 12. ECOLOGICAL INFORMATION Toxicity Persistence and degradability Bio accumulative potential Mobility in soil PBT and vpvb assessment Other adverse effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. 13. DISPOSAL CONSIDERATIONS Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product. 14. TRANSPORT INFORMATION DOT (US) Not dangerous goods IMDG Not dangerous goods IATA Page 6 of 7

7 Not dangerous goods 15. REGULATORY INFORMATION SARA 302 Components SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 Components SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA 311/312 Hazards Acute Health Hazard Massachusetts Right to Know Components No components are subject to the Massachusetts Right to Know Act. Pennsylvania Right to Know Components CAS-No. Water Acetic Acid Revision Date New Jersey Right to Know Components CAS-No. Water Acetic Acid Revision Date California Prop. 65 Components This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. 16. OTHER INFORMATION Further information Prepared By LI-COR, Inc. Safety and Compliance Department 4647 Superior Street, Lincoln, NE (402) Page 7 of 7

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Version 1.2 Revision Date 11/4/2016.

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Version 1.2 Revision Date 11/4/2016. 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Sapphire 700 Stain Part Number(s) : 928-40022 Brand : LI-COR Supplier : LI-COR, Inc. 4647 Superior Street P.O. Box 4425 Lincoln, NE 68504 USA Telephone