Page 1 of 1 04/19/13 SBR
|
|
- Alan Owen
- 5 years ago
- Views:
Transcription
1 Office of Roadway Engineering - Plan Insert Sheets Number Title Date Number Title Date Number Title Date Extension of Anchor Bolts 07/20/ Bikeway Pavement Marking Details 01/18/ Sign Mounting Details 11/27/ Web Cameras 04/20/ Concrete Barrier Mounted Sign Support Detail, Method A 11/27/ Radio Interconnect Details 04/20/ Concrete Barrier Mounted Sign Support Detail, Method B 11/27/ Ramp Meter Installation 07/20/ Concrete Barrier Mounted Sign Support Detail, Method C 11/27/ Uninterruptible Power Supply (UPS) and Controller Cabinet Foundation 04/20/ Sign Support Assembly, Pole Mounted, As Per Plan 11/27/ Uninterruptible Power Supply (UPS) Foundation Retrofit 04/20/ Split Foundation 11/27/ Breakaway Transformer Base Connector Design 01/15/ Protective Coating of Overhead Sign Support Sections 01/21/ Diamond Interchange 3-Phase Operation 07/18/ Protective Coating of Overhead Sign Support Sections, Method B 11/27/ Diamond Interchange 4-Phase Operation 07/18/ Dynamic Message Sign Truss Catwalk 04/20/ Signal Tether Attachment 04/19/ Overhead Sign Support, Type TC /27/ Overhead Signal Attachments, Span Wire 04/19/ Fixture Support Arm Repair Brackets 11/27/ Construction Access Points 04/16/ Controller Cabinet Generator Power Panel 04/20/ Maintaining Mainline Traffic Using Ramps 07/20/ Battery Backup System (BBS) Generator Power Panel 04/20/ Median Crossover of Passing Lane, Short Distance 10/15/ Prepare To Stop When Flashing (PTSWF) Sign Installation 04/20/ Median Crossover of Express Lane, Long Distance 10/15/ Wapiti Software Timing Master 11/27/ Traffic Control for Post Chip Seal Operations 07/18/ Sign Lighting Details 01/21/ Short-Duration Closure of Multi-Lane Divided Highway 07/20/ Wapiti Software Intersection Timing, 332 Cabinet 01/19/ Impact Attenuator Placement 07/20/ Wapiti Input File Information for 332 and 336 Cabinets 01/20/ Longitudinal Channelizer Detail 04/17/ Sepac Input File Information for 332 and 336 Cabinets 04/20/ Wapiti Software Intersection Timing, 336 Cabinet 01/19/ Magnetometer Detector Probe Installation on Bridge 11/27/ Typical Pole Entrance Fitting 11/27/ Aerial Cable Placement Methods 11/27/ Cable Storage Details I 11/27/ Cable Storage Details II 11/27/ Miscellaneous Fiber Optic Details 04/15/ Typical Loose Tube Cable Installation 04/20/ Cable Construction 11/27/ Rumble Stripes 04/20/12 Page 1 of 1 04/19/13 SBR
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48 1.5 (Typ.) Span Wire Clamp Assembly 3-Bolt Clamp Messenger Wire Bullring 1. NOTES S-Hook is matched to the strain pole design number (see table). S-Hook DESIGNED O FFICE O F RO A D W A Y ENGINEERING REVIEWED and turnbuckle are required only at one end of simple spans, all ends of " Bullring Tie as Required (Note 8) Wire Rope Clips (3) complex spans. S-Hook shall be closed at pole end. If S-Hook begins to yield during installation, it shall be removed and replaced. The wire tension shall be adjusted to minimize movement of signal heads in high winds. Typical tension is 600 to 800 lbs. REVISION DATE CHECKED Safety Tie Anchor Assembly (Typ.) (see Note 7) Backplate, 2. Lock wire shall be stainless steel, " soft temper, wound to prevent turning of the turnbuckle body. Finished span shall have at least 2" of space for turnbuckle adjustment. Turnbuckle shall not be overtightened. Use 8" hand tools, maximum. PIS NUMBER Louvered 3. If signal orientation is not perpendicular to span and tether wire, Thimble w/reflective then use an anchor extension. Clamp assembly must be attached to the Safety Tie Border flat side of the extender bar. (Note 4) 4. Install safety tie at each turnbuckle. This wire shall be 1 x 19, " stainless steel. Tie should be slack, but not so slack as to contact Wire Rope Clips (3) pole. Use 3 clips per end at 3-" spacing. Tether Wire Clamp Assembly Required (see Note 6) (X) (Note 7) Wire Rope Clips (3) Thimble (Safety Tie) Wire Rope Thimble (Tether) Clip (1) S-Hook Bullring Detail A Guy Grip Anchor Shackle " x 12" Eye-Eye Forged Turnbuckle (Note 1) Strain Pole Tether Wire (Note 5) Cast Wire Rope Clip Tether Wire shall be Horizontal with Minimal or No Sag Breakaway Tether Anchor (see PIS ) Detail B Use Extension if Necessary Only to Clear Backplate (Note 3). Signal Head Height Adjustment shall be by Top-Mounted Extensions Only Tether wire shall be 7-strand ASTM A475 HS or EHS Grade ". On all spans, install tether horizontally. Maintain clearance of 17 to 19 over roadway. Span wire clamp as per Standard Construction Drawing TC required for tether wire attachment or approved equal rated at 3000 lbs or higher. Alternate attachment method shall not be permitted. Safety tie anchor height above tether is adjusted in the field before S-Hook is installed. Dimension X (Safety Tie Height) shall be adjusted so that the minimum vertical clearance of the sagging tether wire above the pavement without the S-Hook installed is at least 14. Minimum distance between the safety tie clamp and tether clamp shall be 1.5 and contain enough slack for head to sway in high winds. Safety tie anchor may be any galvanized or stainless steel pole clamp assembly rated at 3000 pounds or higher. On spans with bullrings, a tie shall be provided between messenger and tether bullrings if a 14 clearance cannot be maintained after S-Hook opening. This vertical tie shall be 1 x 19, " stainless steel. Tie shall be slightly slack, tied back using cast wire rope clips as shown. Wire rope clips shall not be over-tightened. PLAN INSERT SHEET SIG NA L TETHER A TTA C H M ENT Bearing Plate: 0.25" Galvanized Mild Steel Bar, 0.25" x 2" x 3" Typ., Inserted Between Tether Wire Strain Pole Design No. Galvanized Mild Steel S-Hook Yield Point S-Hook Wire (+10% / -20%) Diameter (Inches) (Pounds) Extender and Extender, Bolted Through 2 Holes, Edges Rounded or Chamfered /8 1/ Span Wire Clamp Assembly Anchor Shackle Lock Wire (see Note 2) 2" Min. (see Note 2) Turnbuckle (Min. " Bolt Size) Safety Tie Thimble Thimble S-Hook: Turnbuckle End Must be Closed Breakaway Plate Chamfer or Round Outside of All Tether Wire Clamping Surfaces, 0.125". Typ., Both Sides Tether Wire Compression Spring PIS DETAIL A DETAIL B 1 1 (Top View) (Not to Scale) (Front View) (Bottom View)
49 Extender: Overlap at Least 3" and Fasten with at Least 2 Bolts Backplate (See Note 7) Tri-Stud Breakaway Clamp (Detail A) Center Panel May be Omitted if a Separable Part of Backplate Assembly at 2" Spacing (See Note 6) (NOTE 10) Clamp Assembly, " Slot Messenger Wire Single-Hole Extender Connector Hanger, " (Note 1) Adjustable-Drop Tri-Stud Wire Entrance Strain-Relief Spring (Note 11) (Note 4) 6" Drip Loop (Typ.) 1-4 SECTION SIGNAL HEAD SUSPENSION 2" Fluorescent Yellow Reflective Sheeting Border BACKPLATE LOUVER CONFIGURATION (Typ.) (See Note 7) Backplate (See Note 7) Spreader Bar Assembly: Cast Spreader Bar with Integral Serrated Rings Cast Wire Rope Clips (3) Spreader Bars (Note 9) Lashing Rod 3" Max. 18" 48" 5 SECTION SIGNAL HEAD SUSPENSION (NOTE 10) Field Notch One Corner of Backplate as Needed to Clear Spreader and Tether Wire Clamp Assembly, " Slot DETAIL B1: DOUBLE SPREADER BARS AND CROSS-BRACING ON DIAGONAL SPANS (FRONT VIEW) Messenger Wire Signal Cable Tape or Wrap Cables 6" Drip Loop (Typ.) 18" Cast Wire Rope Clips (3) Strain-Relief Tether Wire Cross Braces: Rounded Edges Spring (Note 11) Min " Thick 2" Width Galvanized Steel Breakaway Clamp, Full Width, Fixed Side Fully Flat Rounded Edges DETAIL A: BREAKAWAY TETHER ANCHOR Backup Tie (Note 8) (May be Field Drilled) Direction of Vehicle Travel Under Signal (TYPICAL, SEE NOTE 6) Spreader Bars (Note 9) DETAIL B2: DOUBLE SPREADER BARS AND CROSS-BRACING ON DIAGONAL SPANS (BOTTOM VIEW) (TYP.) 1 " Min. Tether Wire: ", 7-Strand Compression Spring (Note 11) Direction of Vehicle Travel Under Signal Cast Wire Rope Clip Rounded Edges NOTES 1. Adjust hanger and span wire clamp to eliminate all play between hanger and clamp by using shim washers as necessary. Cast " alumimum matching clamps and hangers with a tight initial fit shall be used. All signal head assemblies shall be installed in a plumb position and perpendicular to the approach lane. 3. All signal heads shall be installed with their lowest part (including tether attachment hardware and backplates) with a clearance above the roadway pavement at all points of 17 to 19. It is intended that this clearance be obtained without the use of bottom extenders, but rather by the careful selection of foundation heights, attachment heights, span wire sag, and other factors during the installation. If the installation cannot be adjusted to the proper clearance the Contractor shall advise the Engineer of all signals which exceed the maximum. The Engineer will, in consultation with the maintaining agency, direct the use of extenders or waive the maximum clearance requirement for each head. If extenders are necessary, adjustable signal hangers as detailed may be used. Only top extenders shall be used; see Note 6. Signal head rotation shall be prevented by the use of serrated rings and tri-studs or other positive devices incorporated in the signal housing and at critical locations in the supporting hardware. Only single-piece tri-stud entrance ports shall be used, not inserts. Nylon locking or deformed-thread nuts shall be used. 5. All conductors shall have adequate clearance between hangers, thimbles, bullrings, etc. in order to avoid damage from rubbing. For all tethered installations, breakaway tether anchor(s) shall be installed in bottom bracket. Bottom tether anchor extender shall be used only if there is interference between backplate and tether wire. Signal height adjustment shall be made by top- mounted extenders only. Breakaway clamp shall be full width with rounded edges. Clamp should compress tether wire only against a flat surface (Detail A). 7. All backplates shall have louvers and 2" fluorescent yellow reflective border. Border shall not be applied over louvers. Louvers should be oriented to scoop air from the front side and oriented with the openings facing alternate directions by groups, as shown. Louver open area shall be at least 8 percent of the total backplate area. 5-section backplates shall have notched top corners, as shown. 8. Backup tie shall be ", 7- strand wire identical to tether wire. Three cast wire rope clips on each side shall be used with 18" overlap and spacing as shown. Tie shall hang no lower than 16.5 above pavement, and must not rub against the breakaway clamp. Ties under 3-section heads are recommended in windy areas; shall be installed if specified in plans, or if directed by the Engineer. Spacing of clips may be adjusted to accommodate adjacent heads. Closely spaced adjacent heads may share a single backup tie and wire rope clips. There shall be a minimum of three wire rope clips between heads. 9. On diagonal spans, a double spreader bar assembly shall be used. Each spreader bar shall be cast aluminum or steel with integral serrations, two on the ends, one in the middle on the opposite side. These shall be attached as shown in Details B1 and B2. All spreader bar hardware shall be stainless steel, with nylon locking or deformed-thread nuts. 10. Multi-way heads with backplates shall not be used on tethered spans. Existing multi-way heads shall be separated as directed by the Engineer. Rewire as necessary to separate the heads per the 11. Compression spring, 0.375" OD, 0.054" wire diaproper alignment. meter, coils per inch, stainless steel 6" minimum length. O FFICE O F RO A D W A Y ENGINEERING DESIGNED REVIEWED PLAN INSERT SHEET PIS NUMBER REVISION DATE O VERHEA D SIG NA L A TTA C H M ENTS, SPA N W IRE CHECKED PIS
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationTripod Setup Guide (M-TPx)
Items needed: 1/2 inch wrench, mast level (M-MLA), medium size wire cutters, crescent wrench, all-purpose grease, tape measure, tie wraps, redi-mix cement (optional), shovel (optional), sledge hammer (for
More informationBALL STOP INSTALLTION GUIDE
BALL STOP INSTALLTION GUIDE GROUND SLEEVE INSTALLATION: 1. Locate the exact location of the ground sleeve. NOTE: Maximum recommended pole spacing is 20 feet on center. 2. Excavate the pole footing; refer
More informationTRAVSMART permanent single-cable horizontal lifeline system
The Travsmart single-line system provides a smooth travel. It allows the traveler to move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user s hands remain
More information8MAY15 US RACK, Inc Falcon Drive, Madera, CA
8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following
More informationIMPORTANT: If you have questions on the use, care, or suitability of this equipment for your application, contact DBI/SALA.
User Instruction Manual Precast Concrete Beam Horizontal Lifeline System This manual is provided as the Manufacturer s Instructions, and should be used as part of an employee training program as required
More informationSub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171
Transformer Business Department Regulator & Inductive Products Sub-Base Assembly For Type-ML 32 & VR-1 Step Voltage Regulator Single-Phase Liquid-Filled Part # GEK 35171 Last Update 11-19-2013 Tom Dauzat,
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationBEAMGUARD SAFETY POST TM INSTRUCTIONS
BEAMGUARD SAFETY POST TM INSTRUCTIONS READ THESE WARNINGS BEFORE USING THE BEAMGUARD SAFETY POST! 1. Before use of this system, read and understand all instructions, warnings, cautions and notes marked
More informationTHOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
More informationORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationSAMPLE PAGE. Section 2... Wire Rope
Section 2...................................................... Wire Rope Never use any kind of clip to directly connect two straight lengths of wire rope to form a continuous piece. Do not make up slings
More informationGUARDIAN FALL PROTECTION
2015 V2 GUARDIAN FALL PROTECTION Product Mini Catalog 2015 For more information, go to www.guardianfall.com or call 800.466.6385 OUR VISION TO ALWAYS BE THE MARKET S FIRST CHOICE FOR FALL PROTECTION AND
More informationInstallation and Training Manual
AirForce1 Tower Kit Installation and Training Manual FuturEnergy Limited Ettington Park Business Centre Stratford upon Avon CV37 8BT +44 (0)1789 451070 Table of Contents Safety Notes... 3 Parts Supplied
More informationOWNER'S MANUAL. Turnbuckle. Stanchions. Warning
GEMTOR, INC....when your life is on the line One Johnson Avenue Matawan, NJ 07747 732-583-6200 800-405-9048 Fax 732-290-9391 OWNER'S MANUAL Installation, Operating, Inspection and Maintenance Instructions
More informationTOWER INSPECTION REPORT
3010 S. Hwy 77, Suite 600 Waxahachie, Texas 75165 http://ctctower.com Office: 972/923-9504 Fax: 972/923-9619 TOWER INSPECTION REPORT PREPARED FOR MR. CUSTOMER 1,563 GUYED TOWER NEAR CITY, STATE JANUARY
More informationUtility Anchor System
Utility Anchor System The Dayton Superior Utility Anchor System is designed to economically simplify the lifting and handling of precast concrete elements. Its economics, ease of use and versatility will
More informationPULLTARP INSTALLATION & OPERATORS MANUAL
PULLTARP INSTALLATION & OPERATORS MANUAL Step 1. Mounting Positions Determine the mounting position for your truck Fig. 1 - Fig. 7. Fig. 1 Fig. 2 Fig. 3 A Mount Top Or Bottom Roll B Mount Top Or Bottom
More information3/8" Safety Cable Systems
3/8" Safety Cable Systems Ladder-Mount 3/8" Cable System (No Slider) Kits include appropriate length of aircraft cable, top and bottom support brackets, 12" tensioning turnbuckle, tension spring, and all
More informationInstallation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
More informationQUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift
INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your
More informationLow Wind High Yields Series
Low Wind High Yields Series Wind Turbines USER S MANUAL Introduction Low Wind High Yields Series rotor blades apply the latest advanced thermoplastic engineering and are manufactured by precision injection
More informationInstallation Guide Wall Mounted Angled Flagpole
Installation Guide 1.5m - 4m Angled Flagpole Dimensions Flagpole Dimensions Wall Bracket Dimensions 2m Aluminium 76mm Glassfibre 114.3mm angle from vertical 2000mm 250mm 300mm 1715mm Backplate thickness
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationAirwalker. Installation and Safety Information. Stretch Products for Dance, Therapy, Education, and Fitness
Airwalker Installation and Safety Information Stretch Products for Dance, Therapy, Education, and Fitness www.dyenamicmovement.com Airwalker is a Registered Trademark of Dye namic Movement Products, Inc.
More informationSCOPE Application, Design, Operations,
SCOPE Application, Design, Operations, Maintenance, etc.: Typical Traffic Control Signals Pedestrian Hybrid Beacons Emergency Vehicle One-Lane/Two-Way Facilities, Freeway Entrance Ramps, and Movable Bridges
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
More informationFigure 3B-1. Examples of Two-Lane, Two-Way Marking Applications
Figure 3B-1. Examples of Two-Lane, Two-Way Marking Applications A - Typical two-lane, two-way marking with passing permitted in both directions B - Typical two-lane, two-way marking with no-passing zones
More informationSafety System Installation Guide for ARE Wind Poles
Safety System Installation Guide for ARE Wind Poles V. 1 May 2011 ** Climbing pegs and ladder should be installed before the pole is erected.** A. Install climbing pegs Install climbing pegs (bolt set)
More informationS Surge Arresters
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type US, UH, and UX Station-Class Surge Arresters Installation and Maintenance Instructions Service Information S235-88-1 Contents Product Information...........................1
More informationFigure 1 - Parts Identification
Instructions for the following series products: Zorbit Energy Absorber Kits (See back page for specific model numbers.) User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems
More informationUSG Ceiling Solutions. LOGIX Integrated Ceiling Systems INSTALLATION GUIDE
USG Ceiling Solutions LOGIX Integrated Ceiling Systems INSTALLATION GUIDE LOGIX Integrated Ceiling Systems INSTALLATION GUIDE Logix Brand Integrated Ceiling Systems integrated ceiling systems from USG
More informationStand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS
1 Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new Stand-N-Fish Kayak Fishing System. Once installed on your kayak the Stand-N-Fish will take your kayak fishing
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationFigure 1 - Parts Identification. Copyright 2002, DB Industries, Inc.
User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems This manual is provided as the Maunfacturer s Instructions, and should be used as part of an employee training program
More informationFoundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationList of Figures. List of Tables
City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures
More informationTOWER INSTALLATION MANUAL For A.R.E. Guyed Pipe Towers Short Towers 43, 64 and 85 feet tall
TOWER INSTALLATION MANUAL For A.R.E. Guyed Pipe Towers Short Towers 43, 64 and 85 feet tall Contents 1) Introduction...2 2) Site Selection and Preparation...2 3) Tools List...3 4) Parts List...4 5) Tower
More informationPLACEMENT OF SIGNS RECOMMENDED PRACTICES SUB-SECTION
Page 1 of 6 RECOMMENDED PRACTICES PART SECTION SUB-SECTION HIGHWAY SIGNS GENERAL General Proper positioning of signs is an important element in the overall control of traffic within a roadway network.
More informationSECTION 10iS: TAILCONE
VAN'S AIRCRAFT, INC. F-1282-R BOTTOM RIGHT SKIN F-1283C J-STIFFENER F-1278 TOP SKIN F-00009-L ADAHRS BRACKET F-00009-R ADAHRS BRACKET F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN SECTION 10iS: TAILCONE
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationHealth & Safety Policy and Procedures Manual SECTION 25 RIGGING AND HOISTING EQUIPMENT
SECTION 25 RIGGING AND HOISTING EQUIPMENT 1. RIGGING AND HOISTING: These rules apply to all Maul Electric, Inc. employees and subcontractors. Note: Maul Electric, Inc. employees will utilize mechanical
More informationWEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
More informationSTATIONARY TRUCK INTERNAL HALYARD V-CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL INSTALLATION READ ALL INSTRUCTIONS BEFORE PROCEEDING
9390 South 300 West, Sandy, Utah 84070 801-562-0123 800-782-0500 ColonialFlag.com STATIONARY TRUCK INTERNAL HALYARD V-CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL INSTALLATION READ ALL INSTRUCTIONS BEFORE
More informationInstallation Instructions - Super Six Electric Arm Kits with Underbody Pivots , , ,
Installation Instructions - Super Six Electric Arm Kits with Underbody Pivots 501-2112, 501-2113, 501-2114, 501-2115 GR 0/23/12 60-0135 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call
More informationFall Protection Checklist. Guardrail System
Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the
More informationInstallation, Operating, Inspection and Maintenance Instructions Ladder Climber s Safety System. Warning
OWNER'S MANUAL Installation, Operating, Inspection and Maintenance Instructions Ladder Climber s Safety System Model # s: 6000, 6001, 6010 Warning You must read and fully understand all instructions, or
More informationVDOT 2016 Road and Bridge Standards Section Traffic Control Devices
CF-1 1301.10 Cabinet Foundation Type A Traffic Signal Equipment CF-2 1301.20 Cabinet Foundation CF-3 1301.30 Cabinet Foundation Type B Traffic Signal Equipment 1301.31 Cabinet Foundation Type B Traffic
More informationDomed Ceilings and Barrel Vaults
Page 1 of 12 Domed Ceilings and Barrel Vaults USG Drywall Suspension System These installation instructions are divided into two parts: Part 1 applies to domed ceilings, and Part 2 applies to vaulted ceilings.
More informationF-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN F-1281-R LOWER RIGHT SKIN F-1208-R FUSELAGE FRAME
F-1282-R BOTTOM RIGHT SKIN F-1283C J-STIFFENER F-1278 TOP SKIN F-00009-L ADAHRS BRACKET F-00009-R ADAHRS BRACKET F-1279-R UPPER RIGHT SKIN F-1280-R RIGHT SIDE SKIN SECTION 10: TAILCONE F-1279-L UPPER LEFT
More informationInstallation Instructions - Electric Steel Drive Systems for Arm Sets to ,
Installation Instructions - Electric Steel Drive Systems for Arm Sets to 22 208-025, 209-025 NB /0/ 607-0029 404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 Step.
More informationCLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
More informationSpring steel fasteners KWHS-14R. KwikWire. Hanging system
Spring steel fasteners KWHS-14R KwikWire Hanging system KwikWire Hanging System Takes the strain out of hanging with chain The KwikWire Hanging System is a flexible replacement for jack chain and all thread
More informationBANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline?
BANKSMAN / SLINGER 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? A. 16mm B. 10mm C. 12mm 2. What is the maximum temperature that a webbing sling can be
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationB-LINE SERIES. Spring steel fasteners KWHS-15. KwikWire. Hanging system
Spring steel fasteners KWHS-5 B-LINE SERIES KwikWire Hanging system KwikWire hanging system. Takes the strain out of hanging with chain Application Photos Applications for the KwikWire Hanging System include:
More informationINSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
More informationMSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
More informationSoma Wind Generators
Soma Wind Generators 13M WINH TOWER INSTALLATION MANUAL ERTIFIED to AS4100 Steel Structures ode AS3995 (1994) Design of Steel Lattice Towers and Masts AS1170.2 (1989) SAA Wind Loading Manufactured by SOMA
More informationSTAKING TRAFFIC CONTROL SIGNAL SYSTEMS
Locating the components of a traffic control signal is not an exact science; many factors influence the location of the components. These factors include: lane widths, radii, pedestrian curb ramp requirements,
More informationAmerican Flagpole & Flag Co. 1(800)
SENTRY CONCEALED HALYARD-REVOLVING TRUCK GROUND SET INSTALLATIONS INSTRUCTIONS 1. Dig foundation as detailed in SECTION A FOUNDATION SPECIFICATIONS, set sleeve in enter of hole with top 2 above grade.
More information3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS
A GENERAL TOWER & SITE ACCESSORIES 3 AND 6 SIDE ARMS, STRAIGHT/TAPERED TOWER SECTIONS 3 6 Tower Leg 2.38 O.D. x 5 Long Mounting Tube Tower Leg 2.38 O.D. x 5 Long Mounting Tube 3 Side Arm 6 Side Arm UNIVERSAL
More informationI. Purpose... 1 II. Introduction... 2 III. General and Safety Precautions... 2 IV. Reference Documents... 3 V. Installation Overview...
Figure 8 Cable Installation Guideline TABLE OF CONTENTS I. Purpose.... 1 II. Introduction... 2 III. General and Safety Precautions... 2 IV. Reference Documents... 3 V. Installation Overview... 4 A. Methods...
More informationSafe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More informationIS37 10 Metre Instrument Mast Handbook
IS37 10 Metre Instrument Mast Handbook Version 10.1 6 th February 2014 Environdata Australia Pty Ltd 42-44 Percy Street Warwick Queensland 4370 Australia Phone: (07) 4661 4699 Fax: (07) 4661 2485 International
More informationCHAPTER 2G. PREFERENTIAL AND MANAGED LANE SIGNS
2011 Edition - Revision 2 Page 275 Section 2G.01 Scope CHAPTER 2G. PREFERENTIAL AND MANAGED LANE SIGNS 01 Preferential lanes are lanes designated for special traffic uses such as high-occupancy vehicles
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationModel 6812C Dual Lane Scoreboard Owner s Manual
The Leader in Event Critical Timing Electronics Model 6812C Dual Lane Scoreboard Owner s Manual Portatree Eliminator Compatible Rev A RaceAmerica, Inc. P.O. Box 3469 Santa Clara, CA 95055-3469 (408) 988-6188
More informationInstallation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems , ,
Installation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems - 204-025, 206-025, 22-025 NB /0/ 607-0020 404 N. Marshall Ave. El Cajon CA. 92020 For technical support
More informationE Lightband Compression Tool Operating Procedure
2002159E Lightband Compression Tool Operating Procedure Organization Name MLB Diameter MLB Assembly Number MLB Assembly Revision MLB Serial Number Instructions: IF LCTS ARE NOT YET INSTALLED ON LIGHTBAND:
More informationBoat Boat Loader Fitting Instructions
Aerodynamic & Heavy Duty Roof Rack Systems Australian Made - Australian Owned www.rhinorack.com Boat Boat Loader Fitting Instructions CONTROLLED Balance point 3 Front eye nuts position 3 Transom eye nut
More informationMethods of installation of ADSS fiber optic cables
Methods of installation of ADSS fiber optic cables Two main methods recommended by the cable manufacturers: A. Mobile Cable Reel method generally recommended for span < 50 m B. Static Cable Reel method
More informationDESIGN CRITERIA DIVISION 4900 TRAFFIC SIGNALS
DESIGN CRITERIA DIVISION 4900 TRAFFIC SIGNALS 4901 GENERAL: These criteria shall be adhered to for the design of all publiclyfinanced or privately-financed traffic signal systems to be installed in the
More informationSTATIONARY TRUCK INTERNAL HALYARD CAM CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL COMMERCIAL INSTALLATION READ ALL INSTRUCTIONS BEFORE PROCEEDING
9390 South 300 West, Sandy, Utah 84070 801-562-0123 800-782-0500 ColonialFlag.com STATIONARY TRUCK INTERNAL HALYARD CAM CLEAT FLAGPOLES FOR QUICK AND PROFESSIONAL COMMERCIAL INSTALLATION READ ALL INSTRUCTIONS
More informationE-trike Li Assembly Guide
PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box
More informationInstallation Instructions - Steel 4 Spring Arm Kits , , , ,
Installation Instructions - Steel Spring Arm Kits 50-0709, 50-079, 50-0750, 50-075, 50-078 GR 8// 07-00 0 N. Marshall Ave. El Cajon CA. 900 For technical support call us at (800) 8-075 Step. Determining
More informationTroyer s Gourd Rack 8 unit F R H O P
B E A D I M-N L Vertical Parts F R H O P Horizontal Parts C G J Updated 11/16 Parts List A: Top of Pole B: Bottom of Pole C: 48 Ground Stake D: Top Perch rods 48 long E: Hub F: Rope Winder w/ attached
More informationGV Standard X-Vent. Setup, Commissioning & Installation Guide
GV Standard X-Vent Setup, Commissioning & Installation Guide Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
More informationWork Standard CABLE PULLING OPERATIONS
Page 1 of 19 ****This document supercedes BECo WMS 2.9-1.1**** 1.0 Purpose CABLE PULLING OPERATIONS 1.1 This Work Method Standard prescribes the preferred methods of removing and installing cables between
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More informationTower Accessories & Hardware
Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing
More information830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19
830 SureFlo Soap Systems Installation Instructions Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 INSTALLATION INSTRUCTIONS SureFlo SOAP DISPENSING SYSTEM FOAM VERSION ONLY B-830 Foam
More informationPUBLIC WORKS DEPARTMENT SIGN AND MARKING PROCEDURES AND GUIDELINES
PUBLIC WORKS DEPARTMENT SIGN AND MARKING PROCEDURES AND GUIDELINES 2015 FORWARD The Revised Code of Washington (RCW) 47.36, Traffic Control Devices, requires the Washington State Department of Transportation
More informationCORPORATE SAFETY MANUAL
CORPORATE SAFETY MANUAL Procedure No. 32-0 Revision: Date: May 2005 Total Pages: 10 PURPOSE To provide general guidelines for the inspection of all ropes, chains, cables, slings, etc. used for personnel
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationInstant Garage 20' x 12' 3" x 8' 3"
Instant Garage 20' x 12' 3" x 8' 3" Assembly Instructions Description Model # Instant Garage 20' x 12' 3" x 8' 3" - Grey CIG 1220 3503502 Recommended Tools OR THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED
More information2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions
SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit
More informationVERTICAL SURFBOARD CARRIER READ ME! IMPORTANT WARNING!
VERTICAL SURFBOARD CARRIER ENG RRAC09 30 min READ ME! Thank you for purchasing a Front Runner Vertical Surfboard Carrier. Before you start, take a moment to familiarize yourself with this Fitting Instruction
More informationNEW FEDERAL RULES BREAKAWAY SIGN SUPPORTS ARE REQUIRED
NEW FEDERAL RULES BREAKAWAY SIGN SUPPORTS ARE REQUIRED The Manual on Uniform Traffic Control Devices (MUTCD), which is the national standard used for all roads open to public travel, states that roadside
More informationMODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
More informationTRAFFIC CONTROL DEVICES
TRAFFIC CONTROL DEVICES SIGNS Temporary traffic control work zone signs include regulatory, warning and guide signs utilized to provide regulations, warnings and guidance information to road users impacted
More informationBEAMGUARD SAFETY POST TM
BEAMGUARD SAFETY POST TM INSTRUCTIONS-SAFETY FIRST! READ THESE WARNINGS BEFORE USING THE BEAMGUARDS! 1. Before use of this system, read and understand all instructions, warnings, cautions and notes marked
More informationA. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
More informationInstructions for the following series products:
Instructions for the following series products: U-Bolt Roof Anchors (See back page for specific model numbers.) User Instruction Manual U-bolt Roof Anchor This manual is intended to be used as part of
More informationInstallation Guide RHT-380. This Manual Must Be Read Before Operating The Equipment CUSTOMER COPY
Installation Guide This Manual Must Be Read Before Operating The Equipment RHT-380 Madison Heights, Michigan 48071 800-725-8377 www.snowexproducts.com CUSTOMER COPY Trynex International 2013 (REV B) F50767
More informationH8 Signs, Supports and Poles
Alberta Infrastructure and Transportation Roadside Design Guide November 2007 H8 Signs, Supports and Poles H8.1 Introduction This section identifies the appropriate roadside safety treatment for signs,
More informationHow to install AEA s 10 meter meteorological tower
How to install AEA s 10 meter meteorological tower Before you start: This guide assumes that you have obtained permission from the land owner, consulted with US Fish & Wildlife Service and obtained approval
More information