DNS. Monoblock directional control valves DNS - Directional control valve

Size: px
Start display at page:

Download "DNS. Monoblock directional control valves DNS - Directional control valve"

Transcription

1 Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I

2 DNS echnical data Nominal flow 45 l/min.9 US gpm Nominal pressure 3 bar 435 psi Maximum tank pressure 5 bar 75 psi Maximum internal leakage ( or -> and ) p= bar (45 psi) emperature range Oil viscosity Fluid 8 cm³/min.49 in³/min - C +85 C NR seals (max peak + C) - C + 3 C HNR seals from 5 mm²/s to 9 mm²/s (5 cst to 9 cst) Hydraulic fluids as defined in ISO standard SNDRD version Section 398SMD6I

3 Dimensions DNS L Standard Dimensions per number of sections Code N of sections L Weight mm in kg lb 4,37 5,, ,94 7, ,5 9,4, ,.5 5, ,67 3, SMD6I

4 DNS Flow curve Flow curve - [bar] OIL = 5 C 9 v OIL = mm / s DNS-6 DNS-5 6 DNS-4 DNS-3 DNS [l/min] esting parameters: Spool type Flow curve - esting parameters: Spool type Flow curve - esting parameters: Spool type 4 398SMD6I

5 Flow curve DNS Metering [l/min] OIL = 5 C v OIL = mm / s bar 5 bar 4 bar 35 5 bar [mm] esting parameters: Spool type 398SMD6I

6 DNS VNR - Check valve VNR External treatment he VNR is a check valve on line which prevents the flow going from the downstream section to the upstream one. he VNR will always be located between the last two sections of the directional control valve. section directional control valve 3 section directional control valve SMD6I

7 External treatment DNS ower unit L y y My D D y his option is used when you want electro-hydraulic or just hydraulic actuation of the directional control valve. With this option, the electro-hydraulic kit will not be supplied with connecting pipes. y y y y y 398SMD6I

8 DNS Element type S Left (standard) D Right ort is usually the nearest port to the actuator side SMD6I

9 hread ports DNS hread ports - Code ype orque Nm hread ports - Code ype orque Nm Not processed L /4'' GS ISO /8'' GS ISO 79 4 /'' GS ISO M4x.5 ISO 9974 M6x.5 ISO C M8x.5 ISO I M6x.5 ISO W M8x.5 ISO L /4'' GS ISO /8'' GS ISO 79 4 /'' GS ISO M6x.5 ISO C M8x.5 ISO I M6x.5 ISO W M8x.5 ISO /6'' - 8 SE ISO 96 8 E 3/4'' - 6 SE ISO /6'' - 8 SE ISO 96 8 E 3/4'' - 6 SE ISO 96 4 hread ort Code ype orque Nm hread port Code ype orque Nm /'' GS ISO N Mx.5 ISO J Mx.5 ISO R 7/8'' - 4 SE ISO Not processed L /4'' GS ISO /8'' GS ISO 79 4 /'' GS ISO M4x.5 ISO 9974 M6x.5 ISO C M8x.5 ISO I M6x.5 ISO W M8x.5 ISO /6'' - 8 SE ISO 96 8 E 3/4'' - 6 SE ISO SMD6I

10 DNS L Standard kit for lever holder ctuator Z Lever holder with stroke limiter 4 4 M 4 4 M M M Without lever holder, standard appendix Cable fitting on actuator side M6 x, SMD6I

11 ctuator DNS M Joystick a M b a=spool st section b=spool nd section G Joystick with spool lock Joystick functions a b a 3, 6.4 a b b a lso available in other configurations. K Hydraulic control Hydraulic control Y Y Y X X Y X X bar mm 398SMD6I

12 DNS ctuator neumatic X Y X Y a = Large chamber he pneumatic actuator is located on the side where the spool control is normally placed and is the main actuator. he directional control valve will also be supplied as standard with the lever holder on the opposite side. b = Small chamber neumatic control bar 8 6 b a mm a = Large chamber b = Small chamber 398SMD6I

13 ctuator DNS H Dual effect S Simple effect port y y y y y y y y a = Large chamber b = Small chamber b = Small chamber X Simple effect port Electro-hydraulic control y y y y [bar] OIL = 5 C v OIL = mm / s b a [mm] a = Large chamber a = Large chamber b = Small chamber 398SMD6I

14 DNS ctuator U Dual effect I Simple effect port y y y y a = Large chamber W Simple effect port b = Small chamber b = Small chamber Electro-pneumatic control y y [bar] 8 OIL = 5 C 7 v OIL = mm / s b a [mm] a = Large chamber a = Large chamber b = Small chamber 4 398SMD6I

15 Spool types Spool type 3 Spool type 4 Spool type 5 Spool type ositions ositions ositions ositions DNS 3 4,, 3 4, 3 4,,,, 3 4,,,, 7 Spool type 3 ositions 3 4,,, 8 Spool type ositions 3 4, 398SMD6I

16 DNS Spool type ositions Spool types 3 4, 7 Spool type ositions 4 3 4,,, 3 Spool type ositions 4 3 4,,, 7 Spool type ositions 4 3 4,,, 6 398SMD6I

17 ositioning device DNS C Neutral position in Neutral position in, detent in Neutral position in, detent in D E F Detent in,, Neutral position in Neutral position in H L Q Detent in Detent in Detent in, R S NS 3 Neutral position in Neutral position in Neutral position in, detent in 3 N 4 S 3 R 4 Neutral position in, detent in 4 Detent in 3,,, Neutral position in 398SMD6I

18 DNS ositioning device VL ressure limiter device valve port and L o select pressure limiter device valves, the directional control valve must have at least 3 sections SMD6I

19 ositioning device DNS V ilot operated check valve port and o select check valves, the directional control valve must have at least 3 sections SMD6I

20 DNS Lever options Straight standard knob Code Description h [mm] h [in] Straight standard knob 9 4,3 Straight standard knob C Straight standard knob 84 7,4 D Straight standard knob 4 8,4 h E Straight standard knob 54 F Straight standard knob 34,97 Ergonomic lever Code Description h [mm] h [in] L Straight vertical O ent 5 vertical R ent 3 vertical M Straight horizontal h Y ent 5 horizontal Q ent 3 horizontal SMD6I

21 ctuator DNS Straight C Rotated D Rotated 9 towards SMD6I

22 DNS ctuator C Stroke limiter M Male dual control M Cable fitting M6 x SMD6I

23 ctuator Microswitch DNS Characteristics of microswitch positioner Contact rating 6(5) at 5V.C 5 Hz 3 at 3V D.C. L/R= 5 ms emperature range - to 85 C Expected mechanical life million cycles at Hz Insulation Up to MΩ Y Dual effect microswitch Simple effect microswitch port MICRO CONCS MICRO CONCS OS. OS. OS. OS. OS. OS. O Simple effect microswitch port MICRO CONCS OS. OS. OS. 398SMD6I

24 DNS hread ports Carry-over option L With carry-over port C.O. C.O SMD6I

25 hread ports DNS 398SMD6I

26 DNS Instructions for ordering DNS Ripetere per ogni sezione del distributore Spool types Sections 3 Sections 4 5 Sections Sections 6 Sections External treatment N None V lack paint Z Galvanising ower unit E lack painted power supply Galvanised power supply 3 Element type S Left (standard) D Right 4 hread ort Not processed L /4' GS ISO 79 3/8'' GS ISO 79 3 /'' GS ISO 79 M4x.5 ISO 9974 M6x.5 ISO 9974 C I W M8x.5 ISO 9974 M6x.5 ISO 649 M8x.5 ISO 649 E 9/6'' - 8 SE ISO 96 3/4'' - 6 SE ISO 96 5 hread ort Not processed L /4' GS ISO 79 3/8'' GS ISO 79 3 /'' GS ISO 79 M4x.5 ISO 9974 M6x.5 ISO 9974 C I W M8x.5 ISO 9974 M6x.5 ISO 649 M8x.5 ISO 649 E 9/6'' - 8 SE ISO 96 3/4'' - 6 SE ISO 96 6 Options on port --LS open - open (standard) open - plugged C D plugged - open open - not processed E not processed - open 7 8 Maximum pressure valve type VM replacement plug 6 6 bar bar bar bar 6 bar 7 bar 8 bar 3 bar 4 bar 5 bar 6 bar 7 bar 8 bar bar bar bar bar 3 bar 4 bar 5 bar bar 7 bar 8 bar 9 bar 3 bar 9 ype of lead seal G Dowel C Cap R Sealed Sealing provided N None hread ort L /4' GS ISO 79 3/8'' GS ISO 79 /'' GS ISO 79 C I M6x.5 ISO 9974 M8x.5 ISO 9974 M6x.5 ISO 649 W E M8x.5 ISO 649 9/6'' - 8 SE ISO 96 3/4'' - 6 SE ISO 96 ctuator L Standard kit for lever holder Z Lever holder with stroke limiter Without lever holder, standard appendix Cable fitting on actuator side M G K Joystick Joystick with spool lock Hydraulic control neumatic H S X U Dual effect electro-hydraulic control Simple effect electro-hydraulic control port Simple effect electro-hydraulic control port Dual effect electro-pneumatic control I Simple effect electropneumatic control port W Simple effect electropneumatic control port 6 398SMD6I

27 Instructions for ordering DNS Spool types Spool type 3 Spool type 4 Spool type Spool type Spool type Spool type 7 3 Spool type Spool type Spool type 7 Spool type 4 Spool options Standard spool 5-5 l/min Standard spool -5 l/min C D Nickel-plated spool 5-5 l/ min Nickel-plated spool -5 l/ min N None 5 6 ositioning device NN None Neutral position in Neutral position in, detent in C Neutral position in, detent in D Detent in,, E F H L Q Neutral position in Neutral position in Detent in Detent in Detent in, R S NS N S Neutral position in Neutral position in Neutral position in, detent in 3 Neutral position in, detent in 4 Detent in 3,,, R Neutral position in For selection, see the relevant chapter 7 8 VL ressure limiting valve below port None 9 VL 9 bar rocessed and plugged VL bar V ilot operated check valve VL bar 6 VL 6 bar VL bar 7 VL 7 bar 3 VL 3 bar 8 VL 8 bar 4 VL 4 bar VL 5 bar VL 6 bar VL 7 bar VL 8 bar VL 9 bar VL bar VL bar VL bar VL 3 bar VL 4 bar VL 5 bar 9 VL ressure limiting valve below port None 9 VL 9 bar rocessed and plugged VL bar V ilot operated check valve VL bar 6 VL 6 bar VL bar 7 VL 7 bar 3 VL 3 bar 8 VL 8 bar 4 VL 4 bar VL 5 bar VL 6 bar VL 7 bar VL 8 bar VL 9 bar VL bar VL bar VL bar VL 3 bar VL 4 bar VL 5 bar Lever options N None S Without lever h 9 mm / 4.3 in h 34 mm / 5.8 in C D E F h 84 mm / 7.4 in h 4 mm / 8.4 in h 54 mm / in h 34 mm /.97 in L O R M Straight vertical ent 5 vertical ent 3 vertical Straight horizontal Y Q ent 5 horizontal ent 3 horizontal Lever holder position Straight Rotated 9 towards (right inlet) C D Rotated 8 Rotated 9 towards N None 3 ctuator N None C Stroke limiter M Male dual control Cable fitting Y Dual effect microswitch Simple effect microswitch port O Simple effect microswitch port 4 Voltage and connector N None V DIN V DIN SMD6I

28 DNS Instructions for ordering 5 hread ort and /'' GS ISO 79 N Mx.5 ISO 9974 J Mx.5 ISO 649 R 7/8'' - 4 SE ISO 96 6 hread ort Not processed /'' GS ISO 79 C M8x.5 ISO /6'' - 8 SE ISO 96 L /4' GS ISO 79 3 M4x.5 ISO 9974 I M6x.5 ISO 649 E 3/4'' - 6 SE ISO 96 3/8'' GS ISO 79 M6x.5 ISO 9974 W M8x.5 ISO Options on port --LS open - open (standard) open - plugged C plugged - open D open - not processed 8 hread ports Carry-over option (standard) With carry-over port 8 398SMD6I

Monoblock directional control valves ML - Directional control valve

Monoblock directional control valves ML - Directional control valve Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow

More information

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US

More information

SDM to 8 sections monoblock valve D1WWDA02A

SDM to 8 sections monoblock valve D1WWDA02A SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information

More information

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options.

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options. Catalog HY14-255/US echnical Information ilot Operated ressure Reducing Valves Series VMY*6 General Series VMY*6 valves consist of the main stage with valve spools and the pilot stage with the proportional

More information

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP) 4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31

More information

Fitted with a main pressure relief valve and a load check valve on every working section.

Fitted with a main pressure relief valve and a load check valve on every working section. SDS18 1 to 12 sectional directional control valve Fitted with a main ressure relief valve and a load check valve on every working section. Available with arallel and series-arallel (tandem) circuit. Otional

More information

180 Series Rotary Shear Directional Control Valve

180 Series Rotary Shear Directional Control Valve 180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44

More information

Directional Control Valves Technical Information Model 1500

Directional Control Valves Technical Information Model 1500 Single spool monoblock valve. 26.4 l/min [7 US gal/min] maximum flow. 138 bar [2 psi] maximum pressure with relief. 27 bar [3 psi] maximum pressure without relief. Garden tractors, mowers, utility equipment,

More information

Directional Control Valves. Technical Information

Directional Control Valves. Technical Information Directional Control Valves echnical Information Using this manual Organization and headings o help you quickly find information in this manual, the material is divided into sections, topics, subtopics,

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

Inverse Prop. Pressure-Relief Cart., Size 2 4

Inverse Prop. Pressure-Relief Cart., Size 2 4 Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in

More information

MECHANICALLY OPERATED DIRECTIONAL VALVES Rotary Type : DRT/DRG-02 Cam Operated : DCT/DCG-01, 03 Threaded Connection/Sub-plate Mounting

MECHANICALLY OPERATED DIRECTIONAL VALVES Rotary Type : DRT/DRG-02 Cam Operated : DCT/DCG-01, 03 Threaded Connection/Sub-plate Mounting MCHNICLLY ORD VLVS Rotary ype : DR/DRG- Cam Operated : DC/DCG-, hreaded Connection/ Mounting General Information Up to 5 Ma (6 SI), L/min (6. U.S.GM) ub. C-6 hese valves are chiefly used to shift the pilot

More information

Cooler-Bypass Thermostat Valve, Size 16

Cooler-Bypass Thermostat Valve, Size 16 Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral

More information

005 Series Modular Valves

005 Series Modular Valves 5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular

More information

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing

More information

Leak-Free Load-Control Valve SAE ½ psi flange

Leak-Free Load-Control Valve SAE ½ psi flange Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control

More information

Monoblock Directional Control Valve RMB 202

Monoblock Directional Control Valve RMB 202 Monoblock Directional Control Valve RMB 202 Key valve features RMB 202 is a 2-section mono block valve, especially designed for front-end loaders. The valve is prepared for quick connecting couplings,

More information

2-way flow control valve Model 2FRM 6

2-way flow control valve Model 2FRM 6 R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D

More information

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation Directional Control Valve RS 280 3 RS 2802 3102RS28001 R S 280 is a modular parallel sect nal valve. Suitable applications are medium sized and big truck loaders, medium sized backhoe loaders and other

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D681- D685 SECION GE MOOG SERVO- ND ROORIONL CONROL VLVES General 2 enefits and Functionality 3 General echnical

More information

Pressure reducing valve, pilot operated, Model 3DR

Pressure reducing valve, pilot operated, Model 3DR RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional

More information

L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE

L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE L15 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE TAKE CONTROL Take control with Muncie Power Products L15 directional control valve. The L15 is constructed with high-grade, iron castings and nickel-plated

More information

Fixed Displacement Motor A4FM

Fixed Displacement Motor A4FM Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Hand & mechanical directional valves

Hand & mechanical directional valves www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated

More information

LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE

LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE

More information

Pressure relief valve, direct operated Type DBD

Pressure relief valve, direct operated Type DBD Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly echnologies neumatics Service Automation Mobile Hydraulics RE 25 402/06.02 Replaces: 03.98 Material No.: 00772632a ressure

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information

Pressure reducing valve, pilot operated

Pressure reducing valve, pilot operated Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content

More information

Inverse Proportional Pressure-Relief Cartridge, Size 10

Inverse Proportional Pressure-Relief Cartridge, Size 10 Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges

More information

4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...

4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1... 4/3 Directional valve elements L8L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L8L1...(EDC-LV) RE 1831-17 Edition: 2.216 Replaces: 7.12 Size 6 Series Maximum

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D 6 8 1 - D 6 8 5 SECION G E MOOG SERVO- ND ROORIONL CONROL V LV E S General 2 enefits and Functionality 3 General

More information

Leak-Free Load-Control Valve, Size 20

Leak-Free Load-Control Valve, Size 20 Leak-Free Load-Control Valve, Size 20 Qmax = 350 l/min [92 gpm], pmax = 420 bar [6000 psi] leak-proof, two-stage hydraulic, manifold mounting 20--P... 1 Description Whenever large loads are to be precisely

More information

Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1

Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size

More information

Pilot valve PPCD04-PPRV DATA SHEET

Pilot valve PPCD04-PPRV DATA SHEET CLSSIC ilot valve CD4-RV D SHEE 294 297 Description SVB pilot valve is a small smooth valve, based on homas Magnetes propotional pressure reducing valve, that controls a limited-flow control feed to a

More information

Pressure reducing valve, direct operated, type DR 5 DP Huade América 1

Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, type DR 5 DP Size 5 up to 31.5MPa up to

More information

PTS1120TSJB PTS2120TSTSJB

PTS1120TSJB PTS2120TSTSJB Engineering & Manufacturing Solutions Specifications: 18 gpm (68.0 lpm) Nominal Capacity. Rated up to 3000 psi (207 bar). Port Sizes: -Inlet/Outlet #12 SAE. -Work Ports #10 SAE. 10 Micron Filtration Recommended.

More information

3-Way Pressure-Reducing Cartridge, Size 2 4

3-Way Pressure-Reducing Cartridge, Size 2 4 -Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher

More information

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31. F MODULES YUKEN's Modular Valves are stack type valves, and require no piping. hey not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min

More information

SystemStak Valves. ISO4401 Size 02

SystemStak Valves. ISO4401 Size 02 SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and

More information

Size 10 (D05) p max 320 bar (4600 PSI) Technical Features. Technical Data. Port dimensions ZB10A(B) SMT_0019 ZB K -

Size 10 (D05) p max 320 bar (4600 PSI) Technical Features. Technical Data. Port dimensions ZB10A(B) SMT_0019 ZB K - ase late with with ressure Relief Valve for Serial lates ssemblies Z0 Size 0 (D05) p max 320 bar (4600 SI) echnical Features ank cover mounted base manifold for hydraulic power packs which require one

More information

Proportional Throttle Cartridges, Size 16

Proportional Throttle Cartridges, Size 16 Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact

More information

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:

More information

Fixed Displacement Motor A4FM

Fixed Displacement Motor A4FM Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min

More information

Pump safety block. Type DBA, DBAW, DBAE(E) Features. Contents. RE Edition: Replaces: 11.10

Pump safety block. Type DBA, DBAW, DBAE(E) Features. Contents. RE Edition: Replaces: 11.10 ump safety block ype D, DW, DE(E) RE 25891 Edition: 2013-05 Replaces: 11.10 Size 16, 25, 32 Component series 2 Maximum operating pressure 350 bar Maximum flow 400 l/min H5872 Features Depressurized start-up

More information

Digital directional & flow control valves D-DF(R)G

Digital directional & flow control valves D-DF(R)G Digital directional & flow control valves D-DF(R)G Functional Symbols Model Code D-DFG- D-DFG-~ D-DFRG-/ D-DFG--C--- Digital directional & flow control valve Size Spool type (neutral position) : ll ports

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

PRESSURE SEQUENCE VALVE TYPE UZK

PRESSURE SEQUENCE VALVE TYPE UZK PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set

More information

directional control valve series cv691

directional control valve series cv691 directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages

More information

VSD03M DIRECTIONAL CONTROL VALVES

VSD03M DIRECTIONAL CONTROL VALVES NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator

More information

Hand pump type CH. Product documentation. 300 bar 8.3 cm 3 /stroke. Operating pressure p max : Displacement volume V max stroke :

Hand pump type CH. Product documentation. 300 bar 8.3 cm 3 /stroke. Operating pressure p max : Displacement volume V max stroke : Hand pump type CH Product documentation Operating pressure p max : Displacement volume V max stroke : 300 bar 8.3 cm 3 /stroke D 7147 CH 04-2018-1.1 by HAWE Hydraulik SE. The reproduction and distribution

More information

Double Pilot Operated Cartridge Check Valve, Size 8

Double Pilot Operated Cartridge Check Valve, Size 8 Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type

More information

VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B

VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B VICKERS SystemStak Valves ISO 441-3; NF-D3; 315 bar (45 psi); 6 L/min (15.7 USgpm) 1 G 227 uild a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space

More information

Dual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications

Dual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents

More information

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided

More information

PLD 03 T A CASAPPA S.p.A.

PLD 03 T A CASAPPA S.p.A. GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...

More information

PRESSURE COMPENSATORS TECNORD

PRESSURE COMPENSATORS TECNORD PRESSURE COMPENSATORS 2-way, Compensating / Reducing Valves GPM PSI LPM BAR MODEL CAVITY PAGE 8 3500 30 245 DF-CP2 7/8 14 UNF 60 16 3500 60 245 QC-CP2 Special 62 Typical Schematic Typical application for

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System Sectional Design and Flow Sharing rinciple Reference: 31--959-EN-3 Stand: 9.216 1/2 2/2 31--959-EN-3/9.216 Contents age 1 General... 5 1.1 Description... 5 1.2 Advantages...

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US Industrial Hydraulic Valves Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-2500/US Industrial Hydraulic Valves WARNING USR RSPONSIBILITY FAILUR OR IMPROPR

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)

More information

VP-PSERIES INTERCHANGE > Stucchi profile

VP-PSERIES INTERCHANGE > Stucchi profile VSERES NERHANE > Stucchi profile EHNAL EAURES AN OONS nterchange Stucchi profile Sealing description Nitrile NR onnection system Screw SUH SOLUONS Available sizes from /4 to Material /treatment arbon steel

More information

3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX

3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX /-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.

More information

Pressure reducing/relief valve, pilot operated type UZCP10

Pressure reducing/relief valve, pilot operated type UZCP10 ressure reducing/relief valve, pilot operated type UZC10 NS10 up to 1, Ma up to 80 dm /min D SHEE - OER RION MNU NUL WK 420 280 07.2014 LICION he pressure reducing/relief valve type UZC10 pilot operated

More information

Directional spool valves type WE6 electrically. operated type WE6 series 32

Directional spool valves type WE6 electrically. operated type WE6 series 32 Directional spool valve electrically operated type WE6 series NS 6 up to 1,5 Ma up to 80 dm /min WK 40 970 06.011 LICION Directional spool valves type WE6 electrically operated are intended for change

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20

More information

Pressure relief valve, direct operated

Pressure relief valve, direct operated ressure relief valve, direct operated R 25402/05.0 Replaces: 10.05 /1 ype DBD Nominal sizes to 0 Component series 1X Maximum operating pressure 0 bar Maximum flow 0 l/min H5585 Overview of contents Contents

More information

Change-Over Pressure Filter DFDK

Change-Over Pressure Filter DFDK Change-Over Pressure Filter up to 8 l/min, up to 35 bar 3 6 4 6 4 8 33 5 66.x 66.x 99.x 3.x 3 3.x 64 3.x 396 3.x. TECHNICAL SPECIFICATIONS. FILTER HOUSING Construction The filter housings are designed

More information

SATURNSERIES INTERCHANGE > ISO (for the couplings)

SATURNSERIES INTERCHANGE > ISO (for the couplings) Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push

More information

Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series)

Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, sandwich

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

WK /2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32. Size 32 up to 42 MPa 700 dm 3 /min DESCRIPTION OF OPERATION

WK /2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32. Size 32 up to 42 MPa 700 dm 3 /min DESCRIPTION OF OPERATION 2/2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32 Size 32 up to 42 MPa 700 dm 3 /min WK 490 907 04.1999r. 2/2 way cartridge valve type URZS 32 can be used to build hydraulic systems

More information

Directional Control valves

Directional Control valves Chapter 10.1 Chapter 10 Directional Control valves 10.1 Check Valves Figure 10.1 Check valve wo conditions: free flow or "checked" flow Usually has a cracking pressure of 69 a 104 a (10-15 psi) If used

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed

More information

SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B:

SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B: Catalog HY14-255/US Technical Information General Description sandwich type pressure s are typically used in combination with proportional directional control valves. The keeps the pressure drop over the

More information

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking: direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting

More information

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001 Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables

More information

corporation For Technical Support... To Order Parts... Call: Fax: Call: Fax:

corporation For Technical Support... To Order Parts... Call: Fax: Call: Fax: c User Manual -osition Regulator 6604 and Kit 6844959 his manual provides installation and operator instructions for Cascade's -osition Regulator. he Regulator enables up to four pressure selections, allowing

More information

VEP-PSERIES INTERCHANGE > Stucchi VEP profile

VEP-PSERIES INTERCHANGE > Stucchi VEP profile VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available

More information

Pressure-Relief Cartridge Valve, Size 4

Pressure-Relief Cartridge Valve, Size 4 Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure

More information

3-Way Safety Block DSV

3-Way Safety Block DSV 3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB Engineering & Manufacturing Solutions Specifications: MDC rated for -4 gpm (-151 lpm) MDCF rated for -3 gpm (-114 lpm) Rate for 3 PSI (27 bar) Port Sizes #16 SAE (1-5/16-12) all ports Weighs 16 lbs. (7.3

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve High sensitivity Type can be combined with 0... 16 bar DN 0.8... 4 mm 1/8, 1/4 or sub-base EEx approvals optional Type 8605 Digital control electronics Cable plug version Type

More information

OMS Technical Information. Versions OMS. Versions

OMS Technical Information. Versions OMS. Versions Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes

More information

Series MX pressure regulators 3/

Series MX pressure regulators 3/ CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges

More information

Reflux 819/FO. Pressure Regulators

Reflux 819/FO. Pressure Regulators ressure Regulators ressure Regulators is a pilot-controlled pressure regulator for medium and high pressure applications. is normally a fail to open regulator that will open under the following conditions:

More information

E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm

E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or

More information