Form MMS 123A1123S Electronic Version. Application. We have incorrect pressure tests for the annulars on subject ABP The ABP shows we
|
|
- Melinda Wilson
- 5 years ago
- Views:
Transcription
1 U.S Department of the Interior 0MB Control Number Minerals Management Service MMS 0MB Approval Expires 08/31/2008 Form MMS 123A1123S Electronic Version Lease Area/Block Well Name ST 01 BP 00 Well Type Exploration Status Approved Operator Shell Offshore Inc Pay.gov Amount Pay.gov Amount Tracking ID Tracking ID 01/14/10 Currently drilling with 15.1 ppg mud weight Expect to be able to drill down to the revised casing point with this same mud weight Leak off on the window is 16.5 ppg Request to set 11 3/4 liner deeper Please see attached revised Drilling Prog Engineering CaIc 123S sheet and Weilbore Schematic Thank you Jane 10/21/09 approval received Frank Patton/Jane chady for below change in test pressures on each DP size We have incorrect pressure tests for the annulars on subject ABP The ABP shows we will test to psi The rated working pressure for the annular preventer varies with drill pipe size and we cannot test all the sizes of drill pipe we plan to run to this pressure We request to test the annulars to 70% of their rated working pressure Thank you for your assistance Jane On 5/8 drill pipe the working pressure is psi Test to 7000 psi On 7/8 drill pipe the working pressure is 7500 psi Test to 5250 psi On 1/2 drill pipe the working pressure is 5000 psi Test to 3500 psi Revision 7/16/2009 Request to set liner set at 30300MD TVD Liner top is 25800MD/ TVD Attachments 123S Schematic 3.PPFGMW Drillers request to set liner without cementing pressure testing or shoe testing Anadarko also requests an an exception that the blind shear rams will also not be tested in association with the setting of the liner Plans are to begin this weekend Revision 6/1 0/2009 Per request of Frank Patton 6/10/2009 Anadarko notifies of change of the directional plan and associated bottom hole location change now planned for MC 984 STOO BPO1 OCS-G Last Casing 11-7/8 Liner set at TVD /26100 MD Top of Liner TVD MD Shoe Test 16.5 ppge FIT Current Depth TVD /28516 MD Mud Weight 14.7 ppg The original directional plan/profile was to maintain the current /- 19 degree of hole inclination to Total Depth Sands being encountered are wet and the well trajectory direction is downdip on structure In an attempt to remain as high on the structure as possible and increase chances of encountering hydrocarbons from this point forward we are now planning to drop angle from 19 degrees back to vertical The original proposed directional plan targeted bottom hole location coordinates at Total Depth of TVD /32000 MD of The proposed directional plan change of dropping the inclination back to vertical and maintaining same through Total Depth of TVD MD would now give proposed bottom hole location of Electronically generated on 01/15/2010 Page of TREX
2 U.S Department of the Interior 0MB Control Number Minerals Management Service MMS 0MB Approval Expires 08/31/2008 Form MMS 123N123S Electronic Version Lease Area/Block Well Name ST 01 BP 00 Well Type Exploration Status Approved Operator Shell Offshore Inc The proposed new bottom hole location is departure of 1199 from the original bottom hole location 1183 and 195 of the original bottom hole location Request for directional plan revision Plans are to start the directional revision /- 3/21/2009 In support of this request please find the following attachments dated 3/4/3009 that have been re attached MMS 123S and attachments Requested departures geological prognosis Evaluation program PP/MW/FG Proposed schematic Engineering Calculations Directional surveys BOP Plats pressures The bottom hole location moved from original BHL 07/01/2009 Request to deepen well to 33210MD/ 32647TVD Currently drilling at 31592MD/ 31028TVD Mud weight 14.7 Shoe test MD TVD 11 7/8 set Revised Attachments include -MMS Form 123S -Proposed Schematic -PP MW FG Plot -Projection to TD survey supplemental Electronically generated on 01/15/2010 Page of
3 U.S Department of the Interior Minerals Management SenAce MMS 0MB Control Number MB Approval Expires 08/31/2008 Lease ArealBlock WelIName ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc General Well Information API Number Approval Date 01/15/2010 Approved By Frank Patton Date of Request 01/14/2010 Req Spud Date 12/20/2009 Kickoff Point Water Depth ft 4045 Drive Size in 36 Mineral Code Hydrocarbon RKB Elevation 82 Drive Depth ft 4465 Subsea BOP Yes Verbal Approval Date Verbal Approval By Proposed Well Location Surface Location LEASE OCS Area/Block lu Authority Federal Lease Entered NAD 27 Data Calculated NAD 27 Departures Calculated NAD 27 X-Y Coordinates Lat Lon Surface Plan Plan Lease OCS Area/Block Bottom Location LEASE OCS Area/Block Entered NAD 27 Data Calculated NAD 27 Departures Calculated NAD 27 X-Y Coordinates Lat Lon Bottom Plan Plan Lease OCS Area/Block Approval Comments Electronically generated on 01/ Page of9
4 U.S Department of the Interior 0MB Control Number Minerals Management SenAce MMS 0MB Approval Expires 08/31/2008 Lease ArealBlock Well Name ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Geologic Information H2S Designation Absent H2S TVD Anticipated Geologic Markers Name Top MD Base Salt Lower Miocene Rig Information RIG SPECIFICATIONS ANCHORS Yes Rig Name NOBLE JIM THOMPSON Type SEMISUBMERSIBLE ID Number Function DRILLING Constucted Year 1982 Shipyard INGALLS Refurbished Year RATED DEPTHS Water Depth 6500 Drill Depth CERTIFICATES ABS/DNV 12/31/2009 Coast Guard 05/28/2010 SAFE WELDING AREA Approval Date 06/10/1999 District Remarks Electronically generated on 01/ Page of
5 U.S Department of the Interior 0MB Control Number Minerals Management SenAce MMS 0MB Approval Expires 08/31/2008 Lease ArealBlock Well Name ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Number Question IResponse Response Text Will you maintain quantities of mud and mud YES material including weight materials and additives sufficient to raise the entire system mud weight 1/2 If hydrocarbon-based drilling fluids were used is YES the drilling rig outfitted for zero discharge and will zero discharge procedures be followed If drilling the shallow casings strings nserless will N/A you maintain kill weight mud on the rig and monitor the weilbore with an ROV to ensure that it If requesting waier of the conductor casing hae N/A you submitted log to MMS GG that is with in 500 feet of the proposed bottom hole location for th Will the proposed operation be coered by an EPA YES GMG Discharge Permit please provide permit number in comments for this question Will all wells in the well bay and related production N/A Subsea well equipment be shut-in when moving on to or off of an offshore platform or from well to well on the plat Electronically generated on 01/ Page of
6 U.S Department of the Interior Minerals Management SenAce MMS 0MB Control Number MB Approval Expires 08/31/2008 Lease Area/Block WelIName ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Permit Attachments File Type File Description Status Required Attachments pdf Drilling prognosis and summary of drilling cementing and mud Attached processes pdf Directional Program Attached pdf Proposed Well Location Plat Attached pdf BOP Dierter Schematics with Operating Procedures Attached pdf Pore pressure PP Mud Weight MW and Fracture Gradient FG Plot Attached pdf Proposed Wellboi-e Schematic Attached pdf Engineenng Calculation Attached Optional/Supplemental Attachments pdf Departure List Attached pdf Loop Current Operating Practicespdf Attached pdf pay Attached Contacts Information Name Hardy Boudreaux Company Shell 0flhore Inc Phone Number Address hardyboudreauxshell.com Contact Description Permitting Name Hal Edwards Company Shell Offshore Inc Phone Number Address Contact Description Sr Staff Well Engineer Electronically generated on 01/ Page of9
7 U.S Department of the Interior 0MB Control Number Minerals Management Sen4ce MMS 0MB ApproaI Expires 08/31/2008 Lease Area/Block Well Name ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Name Jane Chady Company Shell Offshore Inc Phone Number Address jane.chadyshell.com Contact Description Permitting Name Randy Allen Company Shell Offshore Inc Phone Number Address randy.allenshell.com Contact Description Permitting Electronically generated on 01/ Page of
8 U.S Department of the Interior 0MB Control Number Minerals Management SenAce MMS 0MB Approval Expires 08/31/2008 Lease ArealBlock Well Name ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Well Design Information Interval Number Type Casing Name Conductor Section Casing Size Casing Weight Casing Burst Rating Collapse Rating Depth if Pore Pressure Number in lb/if Grade psi MD TVD ppg HCQ GENERAL INFORMATION PREVENTER INFORMATION TEST INFORMATION Hole Size in Type Blowout Annular Test psi 3500 Mud Weight ppg 14.6 Size in BOPDiverter Test psi 7900 Mud Type Code Synthetic Base Welihead Rating psi Test Fluid Weight ppg 14.6 Fracture Gradient ppg 16.8 Annular Rating psi Casing/Liner Test psi 3600 Liner Top Depth ft 0.0 BOP/Diverter Rating psi Formation Test ppg 16.5 Cement Volume cuft 1515 Interval Nurther Type Liner Name Intermediate Section Casing Size Casing Weight Casing Burst Rating Collapse Rating Depth It Pore Pressure Number in lb/if Grade psi MD TVD ppg P-hO GENERAL INFORMATION PREVENTER INFORMATION TEST INFORMATION Hole Size in Type Blowout Annular Test psi 3500 Mud Weight ppg 15.2 Size in BOP/Diverter Test psi 8600 Mud Type Code Synthetic Base Wellhead Rating psi Test Fluid Weight ppg 15.2 Fracture Gradient ppg 16.4 Annular Rating psi Casing/Liner Test psi 1600 Liner Top Depth if BOP/Diverter Rating psi Formation Test ppg 16.4 Cement Volume cuff 216 Interval Number Type Liner Name Intermediate Section Casing Size Casing Weight Casing Burst Rating Collapse Rating Depth ft Pore Pressure Number in lb/if Grade psi MD TVD ppg HCQ GENERAL INFORMATION PREVENTER INFORMATION TEST INFORMATION Hole Size in Type Blowout Annular Test psi 3500 Mud Weight ppg 15.5 Size in BOP/Diverter Test psi 9300 Mud Type Code Synthetic Base Wellhead Rating psi Test Fluid Weight ppg 15.5 Fracture Gradient ppg 16.9 Annular Rating psi Casing/Liner Test psi 2200 Liner Top Depth if BOP/Diverter Rating psi Formation Test ppg 16.9 Cement Volume cuff 104 Electronically generated on 01/ Page of
9 U.S Department of the Interior Minerals Management SenAce MMS 0MB Control Number MB ApproaI Expires 08/31/2008 Lease ArealBlock WeIlName ST 01 BP 00 Well Type Exploration Status Approed Operator Shell 0fhore Inc Open_Hole Depth ft Pore Pressure MD TVD ppg GENERAL INFORMATION PREVENTER INFORMATION TEST INFORMATION Hole Size in Type Blowout Annular Test psi 3500 Mud Weight ppg 15.6 Mud Type Code Synthetic Base Size in Welihead Rating psi BOPDiverter Test psi 9300 Test Fluid Weight ppg 0.0 Fracture Gradient ppg 16.9 Annular Rating psi Casing/Liner Test psi Liner Top Depth ft 0.0 BOP/Diverter Rating psi Formation Test ppg 0.0 Cement Volume Cu ft PAPERWORK REDUC11ON ACT OF 1995 PRA STATEMENT The PRA 44 U.S.C 3501 et seq Requires us to inform you that we collect this information to obtain knomedge of equipment and procedures to be used in drilling operations MMS uses the information to ealuate and approe or disapproe the adequacy of the equipment and/or procedures to safely perform the proposed drilling operation Responses are mandatory 43 U.S.C 1334 Proprietary data are coered under 30 CFR An agency may not conduct or sponsor and person is not required to respond to collection of information unless it displays currently lid 0MB Control Number Public reporting burden for this form is estimated to arage 27 hours per response including the time for reaewing instructions gathering and maintaining data and completing and rewewing the form Direct comments regarding the burden estimate or any other aspect of this form for the Information Collection Clearance Officer Mail Stop 4230 Minerals Management Senice 1849 Electronically generated on 01/ Page of9
10 DATE OPERATOR LOCATION WELL NAME WATER DEPTH 25/8/2009 SHELL 4045 Ft NBLE RKB TO MUDLINE 4127 Ft RKB TO WELLHEAD 4117 Ft Ht ML to WELLHEAD Ft WELLHEAD TYPE FMC UWD-15 LB RLDS CONNECTOR TYPE H4 DRILLING to Waterline Riser Adapter Shoulder ITop of Element J 4083 IBottom of Element hop of Adapter Spool ITop of Element I 4095 IBottom of Element ITop of Ram Body ITop of Ram Body ITopof Ram Body ITop of Ram Body ITop of Ram Body SWALLOW STACK CONNECTOR H ITopofWellhead DATUM NOTE Ram block thickness IRKBtoMudline
BLACK HILLS PLATEAU PRODUCTION COMPANY
BLACK HILLS PLATEAU PRODUCTION COMPANY DRILLING PROGRAM Homer Deep Unit 9 11CH SHL: 300 FNL, 200 FWL, NWNW Sect. 9 T8S R98W BHL: 1350 FSL, 2100 FEL NWSE Sect. 15 T8S R98W Garfield & Mesa Counties, Colorado
More informationAPPENDIX A1 - Drilling and completion work programme
APPENDIX A1 - Drilling and completion work programme Information about the well and drilling To the extent possible, the international system of units (SI) should be adhered to, and the drilling programme
More informationSUBSEA KILL SHEET EXERCISE No. 5
Subsea Kill Sheet Exercise No. 5 SUBSEA KILL SHEET EXERCISE No. 5 Name: Date: Complete the Subsea vertical kill sheet provided on pages 2 and 3. Then answer questions 1 to 12. Please round calculations
More information30 C.F.R. Subpart D Oil and Gas Drilling Operations
Justia> Law> United States> Code of Federal Regulations> Title 30 - Mineral Resources> CHAPTER II--MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR > PART 250--OIL AND GAS AND SULPHUR OPERATIONS
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 06/29/2015
More informationINTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96)
BOP CLASSIFICATION SYSTEM FOR ONSHORE NEWFOUNDLAND AND LABRADOR INTERPRETATION NOTE ISSUED UNDER THE PETROLEUM DRILLING REGULATIONS (CNR 1150/96) PREPARED BY THE PETROLEUM RESOURCE DEVELOPMENT DIVISION
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 03/16/2016
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 15871 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Date: Tracking No.: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Submitted
More informationNew generation of solid expandable liners help give operators a jump on trouble zones
New generation of solid expandable liners help give operators a jump on trouble zones By Pat York, Weatherford SINCE SOLID EXPANDABLE technology has gained credibility as an effective contingency option,
More informationMIA Training Example (Catalano 2H)
MIA Training Example (Catalano 2H) The Catalano 2H is a relatively new 4-string gas well drilled in an area where active underground coal mining is taking place. It is a cased-hole completion and the production
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 102948 Status: Submitted RAILROAD COMMISSION OF TEXAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking No.: Approved 10/13/2015
More informationWhy Do Not Disturb Is a Safety Message for Well Integrity
Why Do Not Disturb Is a Safety Message for Well Integrity Presented at the Practical Well Integrity Conference 9-10 December, 2014 in Houston By Ron Sweatman, Principal Advisor, Reservoir Development Services,
More informationDeepwater Horizon Incident Internal Investigation
Not all Information has been verified or corroborated. Subject to review based on additional information or analysis. Deepwater Horizon Incident Internal Investigation 1 Areas of Discussion Investigation
More informationRailroad Commission of Texas
Workshop Railroad Commission of Texas Casing, Cementing, Drilling Well Control, and Completion Requirements Chairman Houston, Barry Texas T. Smitherman Commissioner David J. Porter Commissioner December
More informationOil Well Potential Test, Completion or Recompletion Report, and Log
Tracking No.: 16947 Status: Submitted RAILROAD COMMISSION OF TEAS Oil and Gas Division API No. 42- Oil Well Potential Test, Completion or Recompletion Report, and Log 1. FIELD NAME (as per RRC Records
More information1. The well has been shut in on a kick and the kill operation has not started.
Well Control Methods Day 2 1. The well has been shut in on a kick and the kill operation has not started. Shut in drill pipe pressure Shut in casing pressure 500 psi 700 psi After stabilization, both pressures
More informationDEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management
DEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management DOCUMENT NUMBER: 800-0810-003 TITLE: EFFECTIVE DATE: AUTHORITY: POLICY: PURPOSE: APPLICABILITY: DISCLAIMER: Guidelines for Development
More informationOffshore Managed Pressure Drilling Experiences in Asia Pacific. SPE paper
Offshore Managed Pressure Drilling Experiences in Asia Pacific SPE paper 119875 Authors: Steve Nas, Shaun Toralde, Chad Wuest, SPE, Weatherford Solutions Sdn Bhd, SPE, Weatherford Indonesia SPE, Weatherford
More informationWorked Questions and Answers
Worked Questions and Answers A Learning Document for prospective Candidates For the Rotary Drilling Well Control Test Programme Copyright, IWCF June 2000 Revision No.1, November 2000 IWCF 2000 page 1 of
More informationW I L D W E L L C O N T R O L PRESSURE BASICS AND CONCEPTS
PRESSURE BASICS AND CONCEPTS Pressure Basics and Concepts Learning Objectives You will be familiarized with the following basic pressure concepts: Defining pressure Hydrostatic pressure Pressure gradient
More informationTexas Administrative Code
TITLE 16 PART 1 CHAPTER 3 RULE 3.13 Texas Administrative Code ECONOMIC REGULATION RAILROAD COMMISSION OF TEXAS OIL AND GAS DIVISION Casing, Cementing, Drilling, Well Control, and Completion Requirements
More informationINTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
INTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following
More informationDEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management
DEPARTMENT OF ENVIRONMENTAL PROTECTION Office of Oil and Gas Management DOCUMENT NUMBER: 800-0810-003 TITLE: EFFECTIVE DATE: AUTHORITY: POLICY: PURPOSE: APPLICABILITY: DISCLAIMER: Guidelines for Development
More informationSURFACE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
SURFACE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following graphs.
More informationPHE KE30-A8 WORKOVER PROGRAM
PHE WMO KE30-A8 WORKOVER PROGRAM PHE KE30-A8 WORKOVER PROGRAM Prepared by: Ross Webber. Hendra Wahyudi. Chandra Maulana. George Lattimore Adi Benanjaya Achmad Soendaroe. Tri Wiyono DRILLING ENGINEER SR.
More informationRPSEA UDW Forum June 22 & 23, Secure Energy for America
RPSEA UDW Forum June 22 & 23, 2010 Secure Energy for America PROJECT TEAM RPSEA Operator Advisory Committee Anadarko Chevron Shell ConocoPhillips Subcontractors IntecSea NOV CTES General Marine Contractors
More informationUnderstanding pressure and pressure
CHAPTER 1 1-1 PRESSURE BASICS Remember to think downhole. The concepts provided in this section cover the foundations for good well control. Understanding pressure and pressure relationships is important
More informationCasing Design. Casing Design. By Dr. Khaled El-shreef
Casing Design By Dr. Khaled El-shreef 1 Casing Design CONTENTS Function of Casing Casing Types & Tools Strength Properties Casing Specification Casing Design 2 1 RUNNING AND CEMENTING CASING Reasons for
More informationChapter 4 Key Findings. 4 Key Findings
Chapter 4 Key Findings 211 4 Key Findings 212 Chapter 4 Key Findings This summarizes the key findings of the investigation team based on its extensive review of available information concerning the Macondo
More informationFrequently Asked Questions (FAQ s)
NTL No. 2015-N01 Information Requirements for Exploration Plans, Development and Production Plans, and Development Operations Coordination Documents on the OCS for Worst Case Discharge and Blowout Scenarios
More informationA New and Simplified Method for Determination of Conductor Surface Casing Setting Depths in Shallow Marine Sediments (SMS)
AADE-07-NTCE-41 A New and Simplified Method for Determination of Conductor Surface Casing Setting Depths in Shallow Marine Sediments (SMS) Paknejad, A., Texas A&M University; Schubert, J., Texas A&M University
More informationDAY ONE. 2. Referring to the last question, what mud weight would be required to BALANCE normal formation pressure?
DAY ONE 1. Normal formation pressure gradient is generally assumed to be: A..496 psi/ft B..564 psi/ft C..376 psi/ft D..465 psi/ft 2. Referring to the last question, what mud weight would be required to
More informationNOT TO COPY -- NO DISSEMINATE WITHOUT WRITTEN AGREEMENT. Presentation JB AG JCN JR 1
Presentation JB AG JCN JR 1 Kicks & blowouts A kick is an unexpected influx into a well of a formation fluid. Should this influx be uncontrolled... -- during its way from the bottom of the hole up in the
More informationAugust 21, Deepwater MPD / PMCD
August 21, 2011 Deepwater MPD / PMCD Managed Pressure Drilling (MPD) Pressure held on top of riser while drilling. Drill in overbalance condition Pressurized Mud Cap Drilling (PMCD) Pressure of mud column
More informationNORSOK STANDARD SYSTEM REQUIREMENTS BOP, DIVERTER AND DRILLING RISER SYSTEM (SYSTEM NO.: 12-30, 12-40)
NORSOK STANDARD SYSTEM REQUIREMENTS BOP, DIVERTER AND DRILLING RISER SYSTEM (SYSTEM NO.: 12-30, 12-40) Rev.1, Dec. 1994 CONTENTS 1 FOREWORD 2 2 SCOPE 2 3 NORMATIVE REFERENCES 2 4 DEFINITIONS AND ABBREVIATIONS
More informationRAILROAD COMMISSION OF TEXAS OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG
RAILROAD COMMISSION OF TEXAS 1701 N. Congress P.O. Box 12967 Austin, Texas 78701-2967 Status: Form W-2 OIL WELL POTENTIAL TEST, COMPLETION OR RECOMPLETION REPORT, AND LOG Date: Tracking.: Approved 03/11/2015
More informationIWCF Equipment Sample Questions (Combination of Surface and Subsea Stack)
IWCF Equipment Sample Questions (Combination of Surface and Subsea Stack) 1. Given the volumes below, how much hydraulic fluid will be required to carry out the following operations (no safety margin)?
More informationPractice Exam IADC WellSharp Driller and Supervisor
Workover & Completion Day 4 1. In a workover operation of a shut in well a Lubricator is being used together with a Wireline BOP / Wireline Valve. Which Barrier is classified as the Primary Barrier? A.
More informationInvestigation of Blowout and Fire Eugene Island Block 284 OCS-G 0991 Well A-13 March 1, 2001
OCS Report MMS 2001-084 Investigation of Blowout and Fire Eugene Island Block 284 OCS-G 0991 Well A-13 March 1, 2001 Gulf of Mexico Off the Louisiana Coast U.S. Department of the Interior Minerals Management
More informationRULES OF THE OIL AND GAS PROGRAM DIVISION OF WATER RESOURCES CHAPTER DRILLING WELLS TABLE OF CONTENTS
RULES OF THE OIL AND GAS PROGRAM DIVISION OF WATER RESOURCES CHAPTER 0400-52-06 DRILLING WELLS TABLE OF CONTENTS 0400-52-06-.01 Drilling Equipment 0400-52-06-.03 Casingheads 0400-52-06-.02 Blowout Prevention
More informationTerrace Petroleum Corporation Cunning Wolf UL No. 602H, 1980 FNL and 467 FWL Section 6, Block 23, ULS Pecos County, Texas
Terrace Petroleum Corporation Cunning Wolf UL No. 602H, 1980 FNL and 467 FWL Section 6, Block 23, ULS Pecos County, Texas 3-29-13 DAY 1 Previously built location, roads, built and lined reserve pits. Move
More informationChapter 5 HORIZONTAL DRILLING
Chapter 5 HORIZONTAL DRILLING Chapter 5 How much money am I about to put on the table for a horizontal well? Did I do sufficient planning? Keys to Successful Horizontal Wells Multi-disciplined teams working
More informationIWCF Equipment Sample Questions (Surface Stack)
IWCF Equipment Sample Questions (Surface Stack) 1. During a well control operation 4000 psi was shut in below the middle pipe rams. Ram type BOP data: Model: Cameron U type Rated Working Pressure: 15000
More informationEvaluation of deepwater kicks and future countermeasures
WELLS AND WELL INTERVENTION Evaluation of deepwater kicks and future countermeasures Paal Skalle, Per Holand 2 and Sigbjørn Sangesland Norwegian University of Science and Technology and 2 SINTEF/ExproSoft
More informationExtended leak off testing
Extended leak off testing Rev: 1.0 03/01/01 Purpose To ensure minimal operational time and risk exposure to personnel, process, production and equipment. The following extended leak off test procedures
More informationECD Reduction Tool. R. K. Bansal, Brian Grayson, Jim Stanley Control Pressure Drilling & Testing
ECD Reduction Tool R. K. Bansal, Brian Grayson, Jim Stanley Control Pressure Drilling & Testing Drilling Engineering Association, Fourth Quarter Meeting November 20, 2008 1 Presentation outline Description
More informationIntroduction. DEEPWATER DRILLING RISER INTEGRITY - FATIGUE, WEAR, INSPECTION AND MONITORING by Dr Hugh Howells and Dave Walters 2H Offshore Inc
DEEPWATER DRILLING RISER INTEGRITY - FATIGUE, WEAR, INSPECTION AND MONITORING by Dr Hugh Howells and Dave Walters 2H Offshore Inc Presented at OMAE, New Orleans, February 2000 Introduction Characteristics
More informationBlowout during Workover Operation A case study Narration by: Tarsem Singh & Arvind Jain, OISD
1. Introduction An incident of gas leakage from a well took place during workover operations. Subsequently, the gas caught fire on the fourth day in which twelve persons were injured. Two contract workers,
More informationThe Alberta Energy Regulator (AER) has approved this directive on January 31, Introduction Purpose of This Directive...
Directive 008 Release date: January 31, 2018 Effective date: January 31, 2018 Replaces previous edition issued February 29, 2016 Surface Casing Depth Requirements The Alberta Energy Regulator (AER) has
More informationDrilling Morning Report
REPORT DATE 5/0/200 Report # AFE # Casing OD(in) WT(lbs/ft) Grade Btm MD(ft) Btm TVD(ft) DCRB04 TVD: 32 MD: 32 Progress: 32 Planned TD:,500 Current Hole Size: Days From Spud: Spud Date: 5//0 Days on Well:
More informationBP SIT Testing Franks Facility Lafayette
BP SIT Testing Franks Facility Lafayette General Information Status: Franks test well Lafayette La. Rig: Franks Test Rig Casing: 13 3/8, 0 to 4,600 Workstring: 4 ½ IF Brine: Fresh Water Directional: Straight
More informationMIA Training Example (Beattie No. 99)
MIA Training Example (Beattie No. 99) The Beattie No. 99 is a Turn-of-the-20 th Century gas well with no construction information available. Since the production casing is all that is accessible at the
More informationAppendix K Appendix K
Appendix K BOP Leaks There were five minor leaks in the Deepwater Horizon BOP control system: three were identified after the BOP stack was latched to the wellhead in February 2010, and two were identified
More informationOil, Gas and Salt Resources of Ontario
Oil, Gas and Salt Resources of Ontario Provincial Operating Standards Version 2.0 Oil, Gas and Salt Resources of Ontario Provincial Operating Standards, Version 2.0 Version 2.0 of the Oil, Gas and Salt
More informationSolid Expandable Tubular Technology: The Value of Planned Installation vs. Contingency
Solid Expandable Tubular Technology: The Value of Planned Installation vs. Contingency Chris Carstens Unocal Corporation 14141 Southwest Freeway Sugar Land, Texas 77478 Mike Breaux Unocal Corporation 14141
More informationA Novel Approach to Capitalize WITSML Data in Geospatial Platform for Realtime Monitoring and Risk Assessment
A Novel Approach to Capitalize WITSML Data in Geospatial Platform for Realtime Monitoring and Risk Assessment Dr. Sethupathi Arumugam PhD Principal Consultant Biswa Ranjan Patra Principal Consultant Shebi
More informationCasing! 07 An Overview!
Casing! 07 An Overview! Introduction to Well Engineering - 07 - Casing 1 Contents 1. Introduction 4 2. Component Parts Of A Casing 7 3. Casing Terminology 8 3.1 Conductor Casing (30" O.D.) 9 3.2 Surface
More informationBANDAR PANJI-1 WELL CONTROL INCIDENT REPORT
BANDAR PANJI-1 WELL CONTROL INCIDENT REPORT EXECUTIVE SUMMARY I was requested by management to review the Banjar Panji-1 drilling operations from the conception of the Integrated Drilling Management approach
More informationTibor Szabó DRILLING THROUGH SHALLOW GAS ZONES IN HUNGARY
Tibor Szabó Petroleum Engineering Department University of Miskolc, Hungary DRILLING THROUGH SHALLOW GAS ZONES IN HUNGARY The prospecting activity for CH is more than 60 years old in Hungary. During this
More informationW I L D W E L L C O N T R O L SHUT-IN PROCEDURES
SHUT-IN PROCEDURES Shut-in Procedures Learning Objectives You will learn general shut-in procedures: For surface BOPs. For subsea BOPs. You will learn to interpret shut-in pressures and be able to perform
More informationSubsea Safety Systems
Subsea Safety Systems The ELSA-HP has been developed to service the high pressure horizontal tree completion and intervention market. With systems designed and qualified up to 15,000 psi, 250 degf and
More informationInternational Well Control Forum. IWCF Drilling Well Control Syllabus Level 3 and 4 March 2017 Version 7.0
International Well Control Forum IWCF Drilling Well Control Syllabus and 4 March 2017 Version 7.0 IWCF Drilling Well Control Syllabus and 4 Contents Guidance Notes... 5 1.1. Introduction... 5 1.2. Who
More informationRailroad Commission of Texas. Chairman Barry T. Smitherman Commissioner David Porter Commissioner Christi Craddick
Railroad Commission of Texas Chairman Barry T. Smitherman Commissioner David Porter Commissioner Christi Craddick 1 RRC Regulations Primary directives: - Prevent Waste - Promote Conservation - Protect
More informationAppendix M Structural Analysis of the Macondo #252 Work String. Appendix M Structural Analysis of the Macondo #252 Work String
Appendix M Structural Analysis of the Macondo #252 Work String Appendix M Structural Analysis of the Macondo #252 Work String Structural Analysis of the Macondo #252 Work String SES Document No.: 1101190-ST-RP-0003
More informationWell Control Drill Guide Example Only. Drill Guide is the list of drills, questions and attributes that are in DrillPad.
Well Control Drill Guide Example Only Drill Guide is the list of drills, questions and attributes that are in DrillPad. This Well Control Drill Guide will be used in conjunction with the rig-specific well
More informationCased-Hole Logging Environment
Cased-Hole Logging Environment 2 Planning a Production Logging Job Planning is an important part of a production logging job. Frequently these jobs can only be done in safety during daylight. Thus, the
More informationThe SPE Foundation through member donations and a contribution from Offshore Europe
Primary funding is provided by The SPE Foundation through member donations and a contribution from Offshore Europe The Society is grateful to those companies that allow their professionals to serve as
More informationPROPOSED NEW SUB- CODE 1 RIG UP AND TEAR. Possibly Fits into Existing Code. 7/26/2018 Review PROPOSED NEW CODE EXISTING OPERATION
NW NW 1 RIG UP AND TAR 1 no sub-code RIG UP AND TAR DOWN Start: Rig released from previous well, nd: Rig fully rigged up, acceptance tests successfully completed, and signed off. DOWN 1 1 Rig Under Tow
More informationOIL/GAS WELL COMPLETION REPORT. Well Name and Number Surveyed elevation (feet): KB GL
1800 Washingn Blvd. Baltimore Maryland 21230 OIL/GAS WELL COMPLETION REPORT Permit No. Name of Operar Address Well Name and Number Surveyed elevation (feet): KB GL Well Location Field (If wildcat, so state)
More informationPTRT 1471: Exploration and Production I. Chapter 6: Drilling and Well Completion
PTRT 1471: Exploration and Production I Chapter 6: Drilling and Well Completion Well Planning Drilling is a major investment (over $100m for offshore) Planning is aimed at maximizing investment Wells are
More informationRig Math. Page 1.
Page 1 The Calculator and Main Keyboard Display Numerical 10-key pad used for entering numerical values Trigonometric Functions These keys will be used where wellbore angle is an issue These are the keys
More informationAbandonment Program for Paramount Fort Liard F 36
Abandonment Program for Paramount Fort Liard F 36 Well Name: Paramount et al Liard F 36 Area: 60 0 10 N, 123 0 15 W Location: Latitude: 60 0 05 27 Longitude: 123 0 22 00 UWI: 300F366010123150 WID: 1841
More informationMarine Technology Society
Marine Technology Society Dynamic Positioning Conference 21-22 October, 1997 Session I Review of DP Applications, Consequences and Cost of Failures Drilling Fundamentals-DP Operations-Drilling with Riser
More informationMASTER S THESIS. A Discussion of Well Control Methods. Faculty of Science and Technology. Study program/ Specialization: Spring semester, 2013
Faculty of Science and Technology MASTER S THESIS Study program/ Specialization: Petroleum Engineering Spring semester, 2013 Open Writer: Øystein Røssland (Writer s signature) Faculty supervisor: Professor
More informationDilution-Based Dual Gradient Well Control. Presented at the 2011 IADC Dual Gradient Workshop, 5 May 2011 by Paul Boudreau, Dual Gradient Systems LLC
Dilution-Based Dual Gradient Well Control Presented at the 2011 IADC Dual Gradient Workshop, 5 May 2011 by Paul Boudreau, Dual Gradient Systems LLC In this very short presentation, we will Review Dilution-based
More informationInvestigation of Loss of Well Control Eugene Island Block 277 OCS-G Well A-2 Off the Louisiana Coast July 6, 2001
OCS Report MMS 2002-040 Investigation of Loss of Well Control Eugene Island Block 277 OCS-G 10744 Well A-2 Off the Louisiana Coast July 6, 2001 U.S. Department of the Interior Minerals Management Service
More informationW I L D W E L L C O N T R O L CIRCULATION & WELL CONTROL
CIRCULATION & WELL CONTROL Learning Objectives You will learn: The importance of pump rates and pressures during well control operations Pressure relationships Basic calculations necessary in well control
More informationDRILLING HOSE SOLUTIONS
DRILLING HOSE SOLUTIONS HIGH PRESSURE FLEXIBLE LINES FOR A WIDE RANGE OF DRILLING APPLICATIONS HIGH QUALITY - HIGH STANDARD WE DELIVER ACCORDING TO THE HIGHEST LEVELS OF SPECIFICATIONS AND STANDARDS WITH
More informationMonte Besler Consultant FracN8R Consulting LLC UNITED STATES
Monte Besler Consultant FracN8R Consulting LLC UNITED STATES Engineered Safety and Environmental Aspects of Well Construction and Fracturing Design Monte Besler FRACN8R Consulting, LLC Surface Considerations
More informationStudy Guide IADC WellSharp Driller and Supervisor
Times to Flow Check: Before pulling out of the hole Before pulling BHA into the BOP When bit is pulled into the casing Increase in cuttings at shakers with same ROP On connections Upon abnormal trip tank
More informationCoal and Water Protection. PADEP: Well Plugging & Subsurface Activities Division Bureau of Oil and Gas Planning & Program Management
Coal and Water Protection PADEP: Well Plugging & Subsurface Activities Division Bureau of Oil and Gas Planning & Program Management Review of Applicable Regulations & Laws Coal protective casing: A string
More informationLearn more at
IBP1833_06 COST EFFICIENT ARTIFICIAL BUOYANT SEABED DRILLING SOLUTION Dan Moutrey 1, Frank Lim 2 Copyright 2006, Instituto Brasileiro de Petróleo e Gás - IBP This Technical Paper was prepared for presentation
More informationBUCCANEER ALASKA OPERATIONS, LLC. BUCCANEER ALASKA OPERATIONS, LLC Cook Inlet Exploratory Drilling Program. Community Outreach: KPB Assembly
Community Outreach: KPB Assembly Agenda 1. Project Overview 2. 3. Waste Management 4. Environmental Management 5. Permits Required & Processing Schedule Processing 6. Q & A / Agency Feedback 2 Project
More informationChapter 5 Drilling and Well Testing Practices
Chapter 5 Drilling and Well Testing Practices Drilling and Well Testing Practices Activities in rotary drilling, completing, testing and maintaining a well. Health and safety requirements shall be covered
More informationSafety and Risk Engineering. HSE Case Implementation Clive Rawson
Safety and Risk Engineering HSE Case Implementation Clive Rawson Purpose ALARP Risk Assessment Major Accident Events Bowties Safety Critical Systems Performance Standards Implementation Getting HSE Case
More informationNiko Deepwater Weatherford MPD DODI Ocean Monarch Nelson Emery Niko Indonesia Drilling Superintendent
Niko Deepwater Weatherford MPD DODI Ocean Monarch Nelson Emery Niko Indonesia Drilling Superintendent 26 Feb - 2014 SPE Thailand 1 Outline Drivers for MPD: 1. Safety of personnel in remote operations 2.
More informationAbstract Objective Scope of Study Introduction Procedures
AADE-05-NTCE-71 A Practical Solution to Control Gas Migration Ned Shiflet, Forest Oil Corporation; Michael O. Dion, TAM International; and David P. Flores, TAM International This paper was prepared for
More informationPerformance and Value of the invision System : Offshore in Coiled Tubing Operations
Performance and Value of the invision System : Offshore in Coiled Tubing Operations Case Study #0004 Date November 01 21, 2017 Location Gulf of Mexico, Deep Water Introduction Intelligent Wellhead Systems
More informationKicks Controlling Techniques Efficiency in Term of Time
Engineering, 2017, 9, 482-492 http://www.scirp.org/journal/eng ISSN Online: 1947-394X ISSN Print: 1947-3931 Kicks Controlling Techniques Efficiency in Term of Time Ali K. Darwesh, Thorkild Maack Rasmussen,
More informationFaculty of Science and Technology. Master Thesis. Writer: Audun Tufte Veisene (Writer s signatures)
Faculty of Science and Technology Master Thesis Study program/ Specialization: Petroleum Engineering/ Drilling Technology Spring semester, 2014 Open Writer: Audun Tufte Veisene (Writer s signatures) Faculty
More informationThe Developing Design of the Blowout Preventer in Deep Water
The Developing Design of the Blowout Preventer in Deep Water IADC World Drilling 2011 Conference & Exhibition 15-16 June 2011, Bella Centre, Copenhagen Eric Brown Project Manager National Oilwell Varco
More informationCommentary on the book by Andrew Hopkins. By Graham Dalzell
Commentary on the book by Andrew Hopkins By Graham Dalzell How we drill oil wells The disaster itself how it happened; (anonymised)- oil, well and drilling companies Andrew s conclusions on the Human,
More informationCasing Design for High Pressure/High Temperature Wells
Casing Design for High Pressure/High Temperature Wells P. I. Edaigbini A. A. Maikobi Department of Petroleum Engineering, Abubakar Tafawa Balewa University, P.M.B.048, Bauchi, Nigeria Abstract A satisfactorily
More informationDevelopment of a Subsurface Mudline Packer to Reduce Risk of Flow after Cementing and Sustained Casing Pressure, While Providing a Platform for P&A.
Development of a Subsurface Mudline Packer to Reduce Risk of Flow after Cementing and Sustained Casing Pressure, While Providing a Platform for P&A. Sean Yakeley, Ed Wood and Yang Xu (Baker Hughes Inc)
More information5. INSPECTION AND TESTING PROCEDURES
5. INSPECTION AND TESTING PROCEDURES 5-1 GENERAL a. If BOPE inspection and/or testing is required on the division s Permit to Conduct Well Operations (Form OG 111), inspections must be made by a division
More informationNORSOK Standard D-010 Rev 4, August 2012
Foreword 2 Introduction 2 1 Scope 4 2 Normative and informative references 4 2.1 Normative references 4 2.2 Informative references 5 3 Terms, definitions and abbreviations 5 3.1 Terms and definitions 6
More informationRIH intermediate section casing in Bazian-1 exploration oil well
Energy and Sustainability V 559 RIH intermediate section casing in Bazian-1 exploration oil well A. K. Darwesh Petroleum Engineering Department, Engineering Faculty, Koya University, Kurdistan Abstract
More informationWellCAP IADC WELL CONTROL ACCREDITATION PROGRAM
WellCAP IADC WELL CONTROL ACCREDITATION PROGRAM WELL SERVICING OPERATIONS (WIRELINE, COILED TUBING & SNUBBING) CORE CURRICULUM AND RELATED FORM WCT-2WSI INTRODUCTORY LEVEL For information on how an course
More information