MMC International. MSDS Material Safety Data Sheet. 1. Identification of the substance/mixture and of the company
|
|
- Jessica Wilkerson
- 5 years ago
- Views:
Transcription
1 1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Steroids Test A STERA0110 MMC International 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Frankenthalerstraat KA Breda The Netherlands Telephone : Fax : address : Info@mmcinter.com 1.4 Emergency telephone number Emergency Phone # : Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1A), H314 Acute toxicity, Inhalation (Category 4) Acute toxicity, Oral (Category 4) Acute aquatic toxicity (Category 1) Classification according to EU Directives 67/548/EEC or 1999/45/EC C Corrosive R35 Very toxic to aquatic organisms. Harmful by inhalation and if swallowed. 2.2 Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Hazard statement(s) H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H332 Harmful if inhaled. H400 Very toxic to aquatic life. Page 1 of 5
2 Precautionary statement(s) P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard Statements R-phrase(s) R20/22 Harmful by inhalation and if swallowed. R50 Very toxic to aquatic organisms. S-phrase(s) S24/25 Avoid contact with skin and eyes. S61 Avoid release to the environment. Refer to special instructions/ Safety data sheets. 2.3 Other hazards - none 3. Composition/information on ingredients 3.1 Mixture: Component CAS-No. Concentration Sulfuric acid % 4. First aid measures 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) Page 2 of 5
3 4.3 Indication of any immediate medical attention and special treatment needed No data available 5. Firefighting measures 5.1 Extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Sulphur oxides, Carbon oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information Use water spray to cool unopened containers 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal according to local regulations. 7. Handling and storage 7.1 Precautions to be Taken: Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 7.2 Other Precautions: "Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and bunged and then disposed of according to local, state, and federal regulations. Page 3 of 5
4 8. Exposure controls/personal protection 8.1 Ventilation Requirements: Use only in well-ventilated areas. 8.2 Personal Protective Equipment: Safety goggles, gloves, vapor respirator, protective clothing. 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Boiling Point: NE Melting Point: 3 C Evaporation Rate NE Vapor Pressure (mm Hg.): 1,33 hpa at 145,8 C Specific Gravity (H20 = 1): 1,80-1,84 g/cm 3 Vapor Density (AIR = 1): 3,39 Solubility In Water: Miscible Other Information: Appearance and Odor: colourless, Acidic odour 10. Stability and reactivity 10.1 Stability: Stable at room temperature in closed containers under normal storage and handling conditions Incompatibility (Materials to Avoid): (Strong) Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates, alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide, Azides, Perchlorates., Nitromethane, phosphorous, Strong oxidizing agents. Reacts violently with:, cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(iii) oxide, Powdered metals 10.3 Decomposition/By Products: No data available 10.4 Hazardous Polymerization: Does not occur. 11. Toxicological information 11.1 Information on toxicological effects May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the skin. May cause central nervous system depression. May cause liver and kidney damage. May cause adverse reproductive and fetal effects based on animal testing. 12. Ecological information 12.1 Adverse effects Prevent from entering sewers or waterways. May be toxic to some aquatic life. Page 4 of 5
5 13. Disposal considerations 13.1 Information on disposal Dispose according to local, state, and federal regulations. 14. Transport information 14.1 Information on transport Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture No data available 16. Other information 16.1 Risks Using this product under normal, properly instructed procedures should not be hazardous Further Information The information above is believed to be accurate and represents the best information currently available to us but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. Page 5 of 5
6 1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Steroids B Test STERB0110 MMC International 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Frankenthalerstraat KA Breda The Netherlands Telephone : Fax : address : Info@mmcinter.com 1.4 Emergency telephone number Emergency Phone # : Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1A), H314 Classification according to EU Directives 67/548/EEC or 1999/45/EC C Corrosive R Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Hazard statement(s) H314 Causes severe skin burns and eye damage. Precautionary statement(s) P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard Statements None Page 1 of 5
7 2.3 Other hazards - none 3. Composition/information on ingredients 3.1 Mixture: Component CAS-No. Concentration Sulfuric acid % 4. First aid measures 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) 4.3 Indication of any immediate medical attention and special treatment needed No data available 5. Firefighting measures 5.1 Extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. 5.2 Special hazards arising from the substance or mixture Sulphur oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. Page 2 of 5
8 5.4 Further information Use water spray to cool unopened containers 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal according to local regulations. 7. Handling and storage 7.1 Precautions to be Taken: Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 7.2 Other Precautions: "Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and bunged and then disposed of according to local, state, and federal regulations. 8. Exposure controls/personal protection 8.1 Ventilation Requirements: Use only in well-ventilated areas. 8.2 Personal Protective Equipment: Safety goggles, gloves, vapor respirator, protective clothing. 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Boiling Point: NE Melting Point: 3 C Evaporation Rate NE Vapor Pressure (mm Hg.): 1,33 hpa at 145,8 C Specific Gravity (H20 = 1): 1,80-1,84 g/cm 3 Vapor Density (AIR = 1): 3,39 Page 3 of 5
9 Solubility In Water: Miscible Other Information: Appearance and Odor: colourless, Acidic odour 10. Stability and reactivity 10.1 Stability: Stable at room temperature in closed containers under normal storage and handling conditions Incompatibility (Materials to Avoid): Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates, alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide, Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(iii) oxide, Powdered metals 10.3 Decomposition/By Products: No data available 10.4 Hazardous Polymerization: Does not occur. 11. Toxicological information 11.1 Information on toxicological effects May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the skin. May cause central nervous system depression. May cause liver and kidney damage. May cause adverse reproductive and fetal effects based on animal testing. 12. Ecological information 12.1 Adverse effects Prevent from entering sewers or waterways. May be toxic to some aquatic life. 13. Disposal considerations 13.1 Information on disposal Dispose according to local, state, and federal regulations. 14. Transport information 14.1 Information on transport Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. Page 4 of 5
10 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture No data available 16. Other information 16.1 Risks Using this product under normal, properly instructed procedures should not be hazardous Further Information The information above is believed to be accurate and represents the best information currently available to us but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. Page 5 of 5
11 1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Ephedrine HCl Test EPH0110 MMC International 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Frankenthalerstraat KA Breda The Netherlands Telephone : Fax : address : Info@mmcinter.com 1.4 Emergency telephone number Emergency Phone # : Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1A), H314 Chronic aquatic toxicity (Category 3), H412 Oxidizing solids (Category 3), H272 Acute toxicity, Oral (Category 3), H301 Eye irritation (Category 2), H319 Acute aquatic toxicity (Category 1), H400 Classification according to EU Directives 67/548/EEC or 1999/45/EC C Corrosive R35 O Oxidising R8 T Toxic R25 N Dangerous for the environment R Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Hazard statement(s) H272 May intensify fire; oxidiser. H301 Toxic if swallowed. H314 Causes severe skin burns and eye damage. Page 1 of 5
12 H319 H400 H412 Causes serious eye irritation. Very toxic to aquatic life. Harmful to aquatic life with long lasting effects. Precautionary statement(s) P220 Keep/Store away from clothing/ combustible materials. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P301 + P310 Immediately call a POISON CENTER or doctor/ physician. 2.3 Other hazards - none 3. Composition/information on ingredients 3.1 Mixture: Component CAS-No. Concentration Filmerine % Oil of vitriol % 4. First aid measures 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) 4.3 Indication of any immediate medical attention and special treatment needed No data available Page 2 of 5
13 5. Firefighting measures 5.1 Extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information Use water spray to cool unopened containers 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal according to local regulations. 7. Handling and storage 7.1 Precautions to be Taken: Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 7.2 Other Precautions: "Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and bunged and then disposed of according to local, state, and federal regulations. 8. Exposure controls/personal protection 8.1 Ventilation Requirements: Use only in well-ventilated areas. Page 3 of 5
14 8.2 Personal Protective Equipment: Safety goggles, gloves, vapor respirator, protective clothing. 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Boiling Point: 290 C* Melting Point: 3 C* Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): 1,33 hpa at 145,8 C * Specific Gravity (H20 = 1):1,84 g/cm3 at 25 C * Vapor Density (AIR = 1): 3,39 - (Air = 1.0) * Solubility In Water: Miscible* Other Information: * Info for oil of vitriol. Appearance and Odor: Transparent 10. Stability and reactivity 10.1 Stability: Stable at room temperature in closed containers under normal storage and handling conditions Incompatibility (Materials to Avoid): Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates, alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide, Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(iii) oxide, Powdered metals, Acids, Ammonia, Cyanides, Amines, Activated carbon 10.3 Decomposition/By Products: Other decomposition products - no data available 10.4 Hazardous Polymerization: Does not occur. 11. Toxicological information 11.1 Information on toxicological effects Headache, Nausea, Incoordination., Absorption into the body leads to the formation of methemoglobin which in sufficient concentration causes cyanosis. Onset may be delayed 2 to 4 hours or longer. Liver - Irregularities - Based on Human Evidence 12. Ecological information 12.1 Adverse effects Prevent from entering sewers or waterways. May be toxic to some aquatic life. Page 4 of 5
15 13. Disposal considerations 13.1 Information on disposal Dispose according to local, state, and federal regulations. 14. Transport information 14.1 Information on transport Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture No data available 16. Other information 16.1 Risks Using this product under normal, properly instructed procedures should not be hazardous Further Information The information above is believed to be accurate and represents the best information currently available to us but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. Page 5 of 5
16 Creation date: Friday, December 20th, Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Clenbuterol test CLEN0110 MMC International 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Frankenthalerstraat KA Breda The Netherlands Telephone : Fax : address : Info@mmcinter.com 1.4 Emergency telephone number Emergency Phone # : Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Acute toxicity, Oral (Category 2, 4), H300, H302 Skin irritation (Category 2), H315 Eye irritation (Category 2), H319 Skin corrosion (Category 1A, 1B), H314 Germ cell mutagenicity (Category 2), H341 Reproductive toxicity (Category 2), H361f Specific target organ toxicity - repeated exposure (Category 1), H372 Acute aquatic toxicity (Category 1), H400 Chronic aquatic toxicity (Category 1), H410 Flammable liquids (Category 3), H226 Classification according to EU Directives 67/548/EEC or 1999/45/EC Xn Harmful R22 Xi Irritant R36/38 T+ Very toxic R28 T Toxic R48/24/25 C Corrosive R34/R35 N Dangerous for the R50/53 environment Page 1 of 5
17 Creation date: Friday, December 20th, Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Hazard statement(s) H226 Flammable liquid and vapour. H300 Fatal if swallowed. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H319 Causes serious eye irritation. H341 Suspected of causing genetic defects. H361f Suspected of damaging fertility. H372 Causes damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. Precautionary statement(s) P264 Wash hands thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor/ physician. Supplemental Hazard Statements None 2.3 Other hazards - none 3. Composition/information on ingredients 3.1 Mixture: Component CAS-No. Concentration Distilled water % Acetic acid First aid measures 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. Page 2 of 5
18 Creation date: Friday, December 20th, 2013 In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) 4.3 Indication of any immediate medical attention and special treatment needed No data available 5. Firefighting measures 5.1 Extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, Hydrogen chloride gas, harmful metal oxides. 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information Use water spray to cool unopened containers 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal according to local regulations. Page 3 of 5
19 Creation date: Friday, December 20th, Handling and storage 7.1 Precautions to be Taken: Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 7.2 Other Precautions: "Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and bunged and then disposed of according to local, state, and federal regulations. 8. Exposure controls/personal protection 8.1 Ventilation Requirements: Use only in well-ventilated areas. 8.2 Personal Protective Equipment: Safety goggles, gloves, vapor respirator, protective clothing. 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Boiling Point: NE Melting Point: >100 C Evaporation Rate NE Vapor Pressure (mm Hg.): NE Specific Gravity (H20 = 1): 1 g/cm 3 Vapor Density (AIR = 1): NE Solubility In Water: Miscible Other Information: Appearance and Odor: Yellow colour, Acidic odour 10. Stability and reactivity 10.1 Stability: Stable at room temperature in closed containers under normal storage and handling conditions Incompatibility (Materials to Avoid): Oxidizing agents, Soluble carbonates and phosphates, Hydroxides, Metals, Peroxides, permanganates, e.g. potassium permanganate, Amines, Alcohols, Nitric acid, Strong oxidizing agents, Strong bases, Strong reducing agents, Nickel, Strong acids, and its alloys, Steel (all types and surface treatments), Aluminum, Alkali metals, Brass, Magnesium, Zinc, cadmium, Copper 10.3 Decomposition/By Products: No data available 10.4 Hazardous Polymerization: Does not occur. Page 4 of 5
20 Creation date: Friday, December 20th, Toxicological information 11.1 Information on toxicological effects May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the skin. May cause central nervous system depression. May cause liver and kidney damage. May cause adverse reproductive and fetal effects based on animal testing. 12. Ecological information 12.1 Adverse effects Prevent from entering sewers or waterways. May be toxic to some aquatic life. 13. Disposal considerations 13.1 Information on disposal Dispose according to local, state, and federal regulations. 14. Transport information 14.1 Information on transport Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture No data available 16. Other information 16.1 Risks Using this product under normal, properly instructed procedures should not be hazardous Further Information The information above is believed to be accurate and represents the best information currently available to us but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. Page 5 of 5
21 Creation date: Friday, December 20th, Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Stanozolol Oxandrolone test STOX0110 MMC International 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Frankenthalerstraat KA Breda The Netherlands Telephone : Fax : address : Info@mmcinter.com 1.4 Emergency telephone number Emergency Phone #: Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Skin corrosion (Category 1A), H314 Acute toxicity, Oral (Category 3) Acute toxicity, Inhalation (Category 1) Skin irritation (Category 2) Eye irritation (Category 2) Specific target organ toxicity - single exposure (Category 3) Classification according to EU Directives 67/548/EEC or 1999/45/EC C Corrosive R35 Toxic if swallowed. Very toxic by inhalation. Irritating to eyes, respiratory system and skin. 2.2 Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Hazard statement(s) H301 Toxic if swallowed H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H319 Causes serious eye irritation. H330 Fatal if inhaled. Page 1 of 5
22 Creation date: Friday, December 20th, 2013 H335 May cause respiratory irritation. Precautionary statement(s) P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P284 Wear respiratory protection P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard Statements None 2.3 Other hazards R-phrase(s) R25 R26 R36/37/38 S-phrase(s) S26 S36/37/39 S45 Toxic if swallowed. Very toxic by inhalation. Irritating to eyes, respiratory system and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). 3. Composition/information on ingredients 3.1 Mixture: Component CAS-No. Concentration Sulfuric acid % 4. First aid measures 4.1 Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. Page 2 of 5
23 Creation date: Friday, December 20th, 2013 In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed Headache, Tremors, To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. The most important known symptoms and effects are described in the labelling (see section 2.2) 4.3 Indication of any immediate medical attention and special treatment needed No data available 5. Firefighting measures 5.1 Extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. 5.2 Special hazards arising from the substance or mixture Dangerous oxides 5.3 Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. 5.4 Further information Use water spray to cool unopened containers 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear vapor respirator, safety goggles, rubber gloves, and disposable coveralls (discard coveralls after use). Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. 6.2 Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (dry soda ash, calcium carbonate, earth, sand, or vermiculite recommended; do not use flammable substances such as sawdust). Scoop up with a non-sparking tool. Ventilate and wash spill site after collection. Place in container for disposal according to local regulations. 7. Handling and storage 7.1 Precautions to be Taken: Page 3 of 5
24 Creation date: Friday, December 20th, 2013 Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in well-ventilated areas. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 7.2 Other Precautions: "Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and bunged and then disposed of according to local, state, and federal regulations. 8. Exposure controls/personal protection 8.1 Ventilation Requirements: Use only in well-ventilated areas. 8.2 Personal Protective Equipment: Safety goggles, gloves, vapor respirator, protective clothing. 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Boiling Point: NE Melting Point: 3 C Evaporation Rate NE Vapor Pressure (mm Hg.): 1,33 hpa at 145,8 C Specific Gravity (H20 = 1): 1,80-1,84 g/cm 3 Vapor Density (AIR = 1): 3,39 Solubility In Water: Miscible Other Information: Appearance and Odor: colourless, Acidic odour 10. Stability and reactivity 10.1 Stability: Stable at room temperature in closed containers under normal storage and handling conditions Incompatibility (Materials to Avoid): Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, picrates, Cyanides, Chlorates, alkali halides, Zinc salts, permanganates, e.g. potassium permanganate, Hydrogen peroxide, Azides, Perchlorates., Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene, cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, phosphorous(iii) oxide, Powdered metals, Strong acids and oxidizing agents 10.3 Decomposition/By Products: No data available 10.4 Hazardous Polymerization: Does not occur. Page 4 of 5
25 Creation date: Friday, December 20th, Toxicological information 11.1 Information on toxicological effects May be fatal or cause blindness if ingested. Harmful if inhaled. May be absorbed through the skin. May cause central nervous system depression. May cause liver and kidney damage. May cause adverse reproductive and fetal effects based on animal testing. 12. Ecological information 12.1 Adverse effects Prevent from entering sewers or waterways. May be toxic to some aquatic life. 13. Disposal considerations 13.1 Information on disposal Dispose according to local, state, and federal regulations. 14. Transport information 14.1 Information on transport Keep in tightly closed container. Keep cool and dry. Prevent from freezing. Avoid all ignition sources (heat, open flame, spark). Avoid incompatible materials. Do not ingest or inhale. Avoid contact with skin, eyes, and clothing. Avoid prolonged or repeated exposure. Wash thoroughly after handling. 15. Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture No data available 16. Other information 16.1 Risks Using this product under normal, properly instructed procedures should not be hazardous Further Information The information above is believed to be accurate and represents the best information currently available to us but does not purport to be all inclusive and shall be used only as a guide. We make no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their particular purposes. Page 5 of 5
26 M.M.C. International Steroid Substances Steroid Test A Colour Steroid Test B Colour Steroid Test B Colour with UV Light Stanozolol/ Oxandrolone Test Clenbuterol/ Oxymetholone Test Alfadolone Orange Yellow Nil Androsterone Orange Yellow White Beclometasone Brown yellow Orange Nil Betamethasone Orange brown Pink Orange Nil Boldenone Base (Equipoise, Ganabol) (pure powder) Warm red after 2 min. Dark Orange after 2 min. Bright Light Orange Boldenone Undecanoate (oil) Dark brownish-red Dark Red Bright Light Orange Boldenone Undecylenate (oil) Orange - Light Brown Dark Orange Brown Bright Light Orange-Yellow Carbenoxolone (CBX) Orange Yellow Yellow Cholesterol Violet Orange White Clenbuterol (Spiropent, Ventipulmin) Purple - Ephedrine Test Clomiphene (Androxal, Clomid, Omifin) Dark brown with yellow-green on the sides of the ampoule Dark brown with yellow-green on the sides of the ampoule Nil Dark brown to black No reaction Dark brown to black Cortisone Orange Yellow Green Desoxycortone Blue black Yellow Yellow Dexamethasone Yellow Orange pink Nil Dienestrol Yellow Orange red Nil Diethylstilbestrol (DES) Orange ( yellow green) Nil Dimethisterone Brown green Orange red Yellow Drostanolone Propionate (Masteron) (oil) Bright green Yellow-Orange Orange Dydrogesterone (Duphaston) - Orange Green-Yellow Enoxolone Orange Yellow Green-Yellow Ephedrine (also for Pseudo- and Nor-Ephedrine) Orange Estradiol (Oestradiol) Orange Yellow Green Estriol Orange No colour Orange in daylight Estrone (Oestrone) Orange Green yellow Green yellow Ethinylestradiol Pink Red orange Orange Fludrocortisone (Florinef) Brown Orange -Brown Green Fludroxycortide (Haelan, Cordran) Yellow Yellow Quenched Fluocinolone (Flucort-N) Yellow Yellow Quenched Fluocortolone Red brown Orange yellow Weak Fluoxymesterone (Halotestin) Yellow Yellow Quenched Hydrocortisone (Cortisol) Yellow brown Green, orange (dichroic) Green Hydroxyprogesterone Blue, violet (dichroic) Yellow Quenched Mestranol Red Orange red Orange Metenolone Enanthate (Primobolan) (Oil) Dark Orange-Brown Dark Orange-Brown Yellow-Orange Methandrostenolone (Averbol, Dianabol, Danabol) (pill) Red Red Nil Red-Brown - - Methasterone (Superdrol) (pill) Light green Light yellow Nil Nandrolone Decanoate (Deca-Durabolin) (oil) Red-Brown Orange-Brown Green Nandrolone Decanoate (Deca-Durabolin) (pure powder) Yellow Green Light Orange Green - - -
27 Steroid Substances Steroid Test A Colour Steroid Test B Colour Steroid Test B Colour with UV Light Stanozolol/ Oxandrolone Test Clenbuterol/ Oxymetholone Test Nandrolone Phenylpropionate (Durabolin) (oil) Nil Yellowish-Orange Green Norethandrolone Red orange Orange -Brown Green Norethisterone Orange brown Orange -Brown Orange Noretynodrel Brown red Orange -Brown Orange Oxandrolone (Anavar, Oxandrin) (pill) No color change No color change Nil Yellow Green after 15 minutes - - Oxymetholone (Anadrol, Anapolon) (pill) No color change Faint yellow Nil - Gray - Prednisolone Brown Orange pink Green Prednisone Orange Yellow Green Progesterone Yellow Yellow Quenched Spironolactone (Aldactone) - ( yellow green) Green Stanozolol (Winstrol) (pill) No color change No color change Nil Olive Green after 15 minutes - - Sustanon 250 (Oil mixture of 4 testosterone esters) Orange-Brown Orange-Brown Greenish-Yellow Tamoxifen Citrate (Nolvadex, Istubal, Valodex) (pill) Yellow Dark Orange Bright yellow Bright Orange Nil Testosterone Cypionate (oil) Orange-Red Orange-Red Greenish-Yellow Testosterone Enanthate (oil) Orange Orange Blue-Greenish Testosterone Enanthate (pure powder) No color change Very faint yellow Blue-Greenish Testosterone Propionate (oil) Olive green Yellow Blue-Greenish Testosterone Propionate (pure powder) No color change No colour Blue-Greenish Trenbolone Acetate (oil) Yellow > light orange Yellow > light orange Green Trenbolone Enanthate (powder) Yellow > light orange Yellow > light Orange Green Trenbolone Enanthate (oil) Light orange Light Orange Green Triamcinolone Yellow ( yellow green) NIL > Green (Slow) The Stanozolol/ Oxandrolone, Clenbuterol/ Oxymetholone and Ephedrine tests contain crystals this is part of the test. Ephedrine Test Other Steroid substances which are not mentioned on this list, may create another or a similar color. In such cases, please notify the Manufacturer, so we can analyze and update this chart. For the most recent version of this chart please visit our website or shop.narcotictests.com Phone: +31 (0) KA Breda The Netherlands Frankenthalerstraat Info@mmcinter.com shop.narcotictests.com
28 Step 1: Step 2: Tap the ampoule a few times on a table or other hard surface, making the crystals fall down. Hold the plastic cap between your thumb and index finger. Break the ampoule s top. Step 3a: Step 3b: Use the included spatula to put the material directly into the ampoule (1) or in the cap (2). For liquid materials (e.g. Testosteron Enanthate ), use an included pipette and put a drop into the ampoule. Step 4: Step 5: Put the cap back on the open ampoule. Check the colour against the colour indicated in the enclosed colour chart. Step 6 (Group B only): Hold the test ampoule under the UV light (included) Check the colour against the colour indicated in the enclosed colour chart. Since MMC tests are fully neutralised as they are used, you can simply deposit the test into the glass recycling bin after use.
MMC International. MSDS Material Safety Data Sheet. 1. Identification of the substance/mixture and of the company
1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Synthetic Cannabinoids Test SCA0110 MMC International 1.2 Relevant identified
More informationMMC International. MSDS Material Safety Data Sheet. 1. Identification of the substance/mixture and of the company
1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : Ketamine KETA0110 MMC International 1.2 Relevant identified uses of the substance
More informationMMC International. MSDS Material Safety Data Sheet. 1. Identification of the substance/mixture and of the company
1. Identification of the substance/mixture and of the company 1.1 Product identifiers Product name : Product number : Brand : GBL test GBL0110 MMC International 1.2 Relevant identified uses of the substance
More informationManganese (Mn) 1000 ppm ICP in HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS
Manganese (Mn) 1000 ppm ICP in HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Manganese (Mn)
More informationPotassium Bromide 0.1M (0.1N) Volumetric Solution MATERIAL SAFETY DATA SHEET SDS/MSDS
Potassium Bromide 0.1M (0.1N) Volumetric Solution MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Potassium
More informationLanthanum 1000 mg/litre AAS in HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS
Lanthanum 1000 mg/litre AAS in HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Lanthanum
More information: ASP50F Adhesive Side Powder, Fluorescent
SECTION 1: Identification 1.1. Identification Product form Substance name Product code : Substance : ASP50F Adhesive Side Powder, Fluorescent : ASP50F 1.2. Relevant identified uses of the substance or
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Cinnamic Acid
Cinnamic Acid CAS No 140-10-3 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Cinnamic Acid CAS-No.
More informationSAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 Version. Revision Date. 0. Print Date
Crime Science Technology 235 Avenue de la Recherche 59120 Loos (FRANCE) Phone : +33.(0).3.20.47.33.07 Mail : info@crimesciencetechnology.com SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
More informationOxalic Acid 0.5M (1N) Volumetric Solution MATERIAL SAFETY DATA SHEET SDS/MSDS
Oxalic Acid 0.5M (1N) Volumetric Solution MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Oxalic
More informationMATERIAL SAFETY DATA SHEET SDS/MSDS
Hafnium 1000 ppm Single Element Standard for ICP in HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Clove Oil
Clove Oil CAS No 8000-34-8 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Clove Oil CAS-No.
More informationCauses serious eye irritation. Harmful to aquatic life with long lasting effects.
Zinc Sulphate 0.05M Volumetric Solution HNO 3 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name
More informationSAFETY DATA SHEET according to 1907/2006/EC, Article 31
SAFETY DATA SHEET according to 1907/2006/EC, Article 31 NEO 800 Page 1/5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name NEO 800 1.2
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name : 1.2. Relevant identified uses of the substance or mixture and uses advised against
More information: PC SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 06/15/2015 Revision date: 12/01/2016 Supersedes: 06/15/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Silicone Rubber Thinner
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Silicone Rubber Thinner : 636C 1.2. Relevant
More informationRhodamine 6g Safety Data Sheet
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name Product code : Substance : : LV505 1.2. Relevant identified uses of
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: : Version: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Glutaraldehyde :
More informationNanotubes, carbon (cas ) MSDS
Click http//www.guidechem.com/cas-308/308068-56-6.html for suppliers of this product Nanotubes, carbon (cas 308068-56-6) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More informationSDS/MSDS. 1.4 Emergency telephone number Emergency Phone # : (9:00am - 6:00 pm) [Office hours]
Lithium 10000 ppm ICP in HNO3 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Lithium 10000
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Olive Oil
Olive Oil CAS No 8001-25-0 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Olive Oil CAS-No.
More informationMaterial Safety Data Sheet Version 2.0 Creation date: 24/10/2013 Updated: 24/10/2013
KURA BIOTEC SPA Material Safety Data Sheet Version 2.0 Creation date: 24/10/2013 Updated: 24/10/2013 Gnechen J2 Puerto Varas, Chile T Chile: +56 9 82336932 T Usa: (+1 424) 258 5087 inquiries@kurabiotec.com
More informationAntimony ppm single Element Standard for ICP in HCl MATERIAL SAFETY DATA SHEET SDS/MSDS
Antimony 10000 ppm single Element Standard for ICP in HCl MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product
More informationivermectin MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking
ivermectin 70288-86-7 MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name : Ivermectin REACH No. : A registration number is not available
More information1.4. Emergency telephone number : US Emergency Telephone No (STERIS); (CHEMTREC)
Date of issue: 01/12/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name : Mixture : Pump Oil Product code
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 11/11/2015
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 11/11/2015 : Mixture : Product code : 2019-2153 1.2. Relevant identified uses of the substance or mixture and uses
More informationAluminum nitride (AlN) (cas ) MSDS
Click http//www.guidechem.com/cas-243/24304-00-5.html for suppliers of this product Aluminum nitride (AlN) (cas 24304-00-5) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More informationSafety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Telephone: or Fax: Emergency Phone #:
Page 1 of 9 Safety Data Sheet 1121 5 th Street NW Washington, DC 20001 www.edvotek.com Version 2 Revision Date 10/24/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Cadmium chloride Product Number:
More informationAcetonitrile with 0.1% Formic Acid for LCMS MATERIAL SAFETY DATA SHEET SDS/MSDS
Acetonitrile with 0.1% Formic Acid for LCMS MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name :
More information: 201, DURAGLOSS VINYL/LEATHER DRESSING
Revision date: 05/28/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : Part# 201 8oz, 202,
More informationName Product identifier % Classification (GHS-US)
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Synthetic Blood : SYNB8 1.2. Relevant identified
More information: MIKROSIL Casting Compound
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : : MCM100 1.2. Relevant identified uses of the
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 03/16/2016
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 03/16/2016 : Mixture : Product code : 2019-21526X 1.2. Relevant identified uses of the substance or mixture and uses
More informationMaterial Safety Data Sheet Version 2.0 Creation date: 01/02/2013
KURA BIOTEC SPA Gnechen J2 Puerto Varas, Chile Material Safety Data Sheet Version 2.0 Creation date: 01/02/2013 T Chile +56 9 8233 6932 T US +1 424 258 5087 inquiries@kurabiotec.com kurabiotec.com 1. PRODUCT
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : L-(+)-Lactic Acid
L-(+)-Lactic Acid CAS No 50-21-5 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : L-(+)-Lactic
More informationPropylene glycol monostearate (cas ) MSDS
Click http//www.guidechem.com/cas-132/1323-39-3.html for suppliers of this product Propylene glycol monostearate (cas 1323-39-3) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More informationSDT (Stereospecific Detection Technologies) GmbH Material Safety Data Sheet
SDT (Stereospecific Detection Technologies) GmbH Material Safety Data Sheet according to Regulation (EC) No. 1907/2006 Version 1.4 Revision Date 04.09.2014 Print Date 16.06.2016 GENERIC EU MSDS - NO COUNTRY
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Manganese Nitrate 45-50%
Manganese Nitrate 45-50% MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Manganese Nitrate 45-50%
More informationSAFETY DATA SHEET DALER ROWNEY GEORGIAN OIL UNDERPAINTING WHITE. Georgian Oil Underpainting White. Peacock Lane Bracknell, RG12 8SS England
Page 1 of 8 1. Identification of the mixture and of the company 1.1 Product identifiers Product name Product number Brand CAS-No Georgian Oil Underpainting White 111-xxx-003 Daler-Rowney Not Applicable
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/information on ingredients
SECTION 1: Identification Manganese Nitrate Date of issue: 12/27/2016 Version: 1.0 1.1. Identification Product form : Mixture Product name : Manganese Nitrate CAS No : 17141-63-8 1.2. Relevant identified
More information: Enzyme Drain Opener
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture : Product code : 2050-7010 1.2. Relevant identified uses of the substance or mixture and uses
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : m-phosphoric Acid
m-phosphoric Acid CAS No 37267-86-0 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : m-phosphoric Acid
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product Name Zinc Benzoate NO. 553-72-0 1.2 Relevant identified uses of the substance
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Symphony Product code : 80162 1.2. Relevant identified uses
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations. H320 - Causes eye irritation
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : M28257 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.3. Details
More informationDowex 50W-X8 (cas ) MSDS
Click http//www.guidechem.com/cas-111/11119-67-8.html for suppliers of this product Dowex 50W-X8 (cas 11119-67-8) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product
More information: Cleaners, liquids (all purpose cleaners, sanitary products, floor cleaners, glass cleaners, carpet cleaners, metal cleaners)
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 07/16/2018 Revision date: 03/16/2016 : Mixture : Product code : 2019-2152 1.2. Recommended use and restrictions on
More information: Presto Neutral Deodorant Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 02/09/2018 Revision date: 04/15/2015 : Mixture Product code : 1273-132 1.2. Recommended use and restrictions on use
More informationIdentified uses : Laboratory chemicals, Manufacture of substances. Warning. Causes serious eye irritation. none
Guangzhou Donghuang Chemical Technology Co., LTD ADD:Room 501, Building C, No. 288, Zhongshan Middle Avenue, Tianhe District, Guangzhou,China. TEL:+86 20-82596870 FAX:+86 20-28876020 WEB:www.dh-nd.com
More information: Electronic Cell Cleaner
Date of issue: 04/17/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Electronic
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 04/15/2015
Revision date: 04/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : Product code : 565-4311 1.2. Relevant
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Barium Oxide
Barium Oxide CAS No 1304-28-5 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Barium Oxide CAS-No.
More informationDFO (1,8- Diazafluorene-9-one) 50g. Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date:12/26/2012 Supersedes:01/27/2011 Version: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name
More informationBromide Bromate Volumetric Solution 0.25 M (0.5N) MATERIAL SAFETY DATA SHEET SDS/MSDS. Hazard symbol(s) Page 1 of 7
Bromide Bromate Volumetric Solution 0.25 M (0.5N) MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Bromide
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : M77342 1.2. Relevant identified uses of the
More information: 301, DURAGLOSS TONNEAU COVER & VINYL CONVERTIBLE DRESSING
301, DURAGLOSS TONNEAU COVER & VINYL CONVERTIBLE Revision date: 05/28/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Potassium Meta Periodate
Potassium Meta Periodate CAS No 7790-21-8 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Potassium
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : M77927 1.2. Relevant identified uses of the
More informationSAFETY DATA SHEET ISSUE DATE: VERSION 3
SAFETY DATA SHEET ISSUE DATE: 26.01.14 VERSION 3 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Hydrogen peroxide 3% solution stabilized
More information1.1 Product identifiers Product Name : ACS Material Graphite Fluoride (Carbon Monofluoride) Brand : ACS Material LLC CAS-No.
Version: 1.1 / EN Revision Date: 05/09/2017 SECTION 1: IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY 1.1 Product identifiers Product Name : ACS Material Graphite Fluoride (Carbon Monofluoride) Brand
More informationSafety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Tris-HCl-SDS-2- Mercaptoethanol Product Number: 658
SDS- Tris-HCl-SDS-2-Mercaptoethanol Page 1 of 8 Safety Data Sheet 1121 5 th Street NW Washington, DC 20001 www.edvotek.com Version 2 Revision Date 11/27/2013 1. PRODUCT AND COMPANY IDENTIFICATION Product
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code Other means of identification : Mixture : Ad-Wet 90 CA :
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Carbol Fuchsin Powder
Carbol Fuchsin Powder CAS No 4197-24-4 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Carbol
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Sodium Bromate
Sodium Bromate CAS No 7789-38-0 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Sodium Bromate CAS-No.
More information: MP70 Multi-Purpose Hand Wipes
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : MP70 Multi-Purpose Hand Wipes : MP70 1.2. Recommended use and restrictions on use Use of the substance/mixture
More informationSAFETY DATA SHEET. Part Number: , PROTEX ALCLEAN
Page 1 (8) SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Trade name 1.2 Relevant identified uses of the substance or mixture and uses advised
More information: Red Caries Indicator
SECTION 1: Identification 1.1. Product identifier Red Caries Indicator Revision date: 09/05/2014 Date of issue: 09/05/2014 Version: 1.0 Product form : Mixture Product name : Red Caries Indicator Other
More informationEstr-4-ene-3,17-diol,(3a,17b)- (cas ) MSDS
Click http//www.guidechem.com/cas-359/35950-87-9.html for suppliers of this product Estr-4-ene-3,17-diol,(3a,17b)- (cas 35950-87-9) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More information: Polyol Ester based lubricant for use in air conditioning systems.
Revision date: : Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name Product code : POE68-55 Ester Refrigerant Oil : POE68-55
More informationN-FORMYL PIPERIDINE CAS NO MATERIAL SAFETY DATA SHEET SDS/MSDS
N-FORMYL PIPERIDINE CAS NO 2591-86-8 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : N-Formyl
More informationBenzalkonium Chloride 50% Solution CAS No MATERIAL SAFETY DATA SHEET SDS/MSDS
Benzalkonium Chloride 50% Solution CAS No 63449-41-2 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product
More information: Focus LD 121 Laundry Detergent
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 2105-2109 : 1.2. Relevant identified uses of the substance or mixture and uses
More informationACETIC ACID 2M (2N) VOLUMETRIC SOLUTION NIST TRACEABLE MATERIAL SAFETY DATA SHEET SDS/MSDS
ACETIC ACID 2M (2N) VOLUMETRIC SOLUTION NIST TRACEABLE MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : 3-Chloro-4-Fluoro Aniline
3-Chloro-4-Fluoro Aniline CAS No 367-21-5 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : 3-Chloro-4-Fluoro
More information1.2 Relevant identified uses of the substance or mixture and uses advised against
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY 1.1 Product identifier Product Name: Calcium Liquid 1.2 Relevant identified uses of the substance or mixture and uses advised against Liquid
More informationSafety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Phenolphthalein Stock Solution Product Number:
SDS- Phenolphtalein Stock Solution Page 1 of 9 Safety Data Sheet 1121 5 th Street NW Washington, DC 20001 www.edvotek.com Version 2 Revision Date 10/28/2015 1. PRODUCT AND COMPANY IDENTIFICATION Product
More information: Bromocresol Green, 0.04% w/v, Aqueous
Date of issue: 08/13/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC11830
More informationMATERIAL SAFETY DATA SHEET SDS/MSDS. Buffer Solution ph 9.2 (Borate)
Buffer Solution ph 9.2 (Borate) MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Buffer Solution
More informationPropanoic acid,2-methyl-, butyl ester (cas ) MSDS
Click http://www.guidechem.com/cas-97/97-87-0.html for suppliers of this product Propanoic acid,2-methyl-, butyl ester (cas 97-87-0) MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Potassium Hydrogen Phthalate
Potassium Hydrogen Phthalate CAS No 877-24-7 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Potassium
More informationSafety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: NBT/BCIP Tablets Product Number:
SDS- NBT/BCIP Tablets Page 1 of 9 1121 5 th Street NW Washington, DC 20001 www.edvotek.com Safety Data Sheet Version 2 Revision Date 10/17/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name: NBT/BCIP
More information1. Identification of the substance/mixture and of the company/undertaking
1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name: 1.2 Relevant identified uses of the substance or mixture and uses advised against Use of the
More information: MCM100CA Mikrosil Catalyst
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : MCM100CA Mikrosil Catalyst : MCM100CA 1.2. Relevant identified uses of the substance or mixture and uses
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name Product code : Substance : : M77439 1.2. Relevant identified uses of
More informationSafety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : M27757 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.3. Details
More information: Bonide Shotgun Repels-All Animal Repellent Concentrate
Bonide Shotgun Repels-All Animal Repellent Concentrate Date of issue: 05/14/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Cinnamaldehyde
Cinnamaldehyde CAS No 104-55-2 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Cinnamaldehyde
More information1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Starch Soluble
Starch Soluble CAS No 9005-84-9 MATERIAL SAFETY DATA SHEET SDS/MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : Starch Soluble CAS-No.
More information: Sulfate Standard, 100 ppm
Date of issue: 04/18/2013 Revision date: 04/18/2013 Supersedes: 04/07/2010 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More informationX BOND CONSTRUCTION ADHESIVE SEALANT
1. Product & Company Identification 1.1 Identification of the substance or preparation: Product name: X Bond Construction Adhesive Sealant Physical form: Paste Odour: Organic solvent odour CAS No.: Mixture
More informationadvice (show the label where possible).
Revision date: 10/15/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Product code : 40105 1.2. Relevant
More information: 221, DURAGLOSS LEATHER CONDITIONER
Revision date: 05/28/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : Part# 221 8oz, 222
More information: KCP122 Blood Collection Tube - VACUTAINER Purple Top
KCP122 Blood Collection Tube - VACUTAINER Purple Top SECTION 1: Identification 1.1. Identification Product form Product name : Mixture CAS No : 65501-24-8 Product code : KCP122 Blood Collection Tube -
More information: SenSATIVAx LYSIS BUFFER
SenSATIVAx LYSIS BUFFER Revision date: 04/17/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Trade name : Substance
More informationDIETHYL ETHOXY METHYLENE MALONATE CAS No MATERIAL SAFETY DATA SHEET SDS/MSDS
DIETHYL ETHOXY METHYLENE MALONATE CAS No 87-13-8 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name
More information: Perma Gloss Floor Finish
SECTION 1: Identification 1.1. Identification Product form Product name Date of issue: 02/09/2018 Revision date: 04/15/2015 : Mixture Product code : 1273-1023 1.2. Recommended use and restrictions on use
More informationSafety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Cells Fixing Agent Product Number:
SDS Cells Fixing Agent Page 1 of 8 1121 5 th Street NW Washington, DC 20001 www.edvotek.com Safety Data Sheet Version 2 Revision Date 05/23/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Cells
More informationMATERIAL SAFETY DATA SHEET SDS/MSDS. CAS No
Calcium-D-Saccharate Tetrahydrate CAS No 5793-89-5 MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product
More informationMATERIAL SAFETY DATA SHEET SDS/MSDS KOVAC'S INDOLE REAGENT
KOVAC'S INDOLE REAGENT MATERIAL SAFETY DATA SHEET SDS/MSDS SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Kovac's Indole Reagent
More information