P.C. Flow Regulator Valve Series FR101. General Description

Transcription

1 P.C. Flow Regulator Valve Series FR11 Compensated Flow Regulator Valve. NOTE: When used with a fixed displacement pump, pressure to the cartridge must be controlled by a relief valve located between the pump and the FR11 cartridge. For additional information see Technical Tips on pages FC1-FC. Cartridge design Acts as a fixed orifice in reverse flow condition Adjustable Style Outlet Regulated Maximum Flow Fixed.5 LPM ( GPM) Adjusted.5 LPM (7 GPM) Maximum Min. Operating 5 Bar (35 PSI) See Regulated Flow vs. Curve Accuracy (Fixed) 3.8 LPM (1 GPM) ±% LPM (-3 GPM) ±15% LPM (- GPM) ±1% Adjustment Range (Adj. Version) Cartridge ±3% Nominal - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better of 5 to SSU ( to cst).3 kg (.5 lbs.) Cavity No. C1- Form Tool Rougher None Finisher NFT1-F Performance Curves Regulated Flow vs. (Through cartridge only) Regulated Flow Regulated Flow LPM ( GPM) Fixed 11.3 LPM (3 GPM) Fixed 3.8 LPM (1 GPM) Fixed 1.7 LPM (.5 GPM) Adjustable (Max. Range) Bar PSI LPM (.5 GPM) Adjustable (Min. Range) Bar PSI Minimum Operating fr11.pm.5, bl, / FC15

2 P.C. Flow Regulator Valve Series FR11 Screw and Knob Adjust - 1/" Internal Hex. 5. (1.) Dia. Knob Fixed Style 55.1 (.17) 78.1 (3.8) 1.9 (.85) 7/8-1 UNF-A 7/8-1 UNF-A. (.5) Outlet 31.8 (1.5) Outlet Ø 15.8 (.) THIRD-ANGLE PROJECTION FR11 1 Compensated Flow Regulator (Restrictive) Adjustment Style Flow Setting/ Range Optional Setting Code Adjustment Style F Fixed Style present at factory K Knob Adjust S Screw Adjust Code Fixed Style Flow LPM (1 GPM) 7.5 LPM ( GPM) LPM (3 GPM) 15 LPM ( GPM) LPM (5 GPM).5 LPM ( GPM) Optional Setting Flow setting specified in.38 LPM (.1 GPM) increments other than standard Code / Kit. No. Omit Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) Code Code Knob/Screw Style Flow Range LPM (.5-.8 GPM) LPM (.8-1. GPM) LPM ( GPM) LPM (1.-. GPM) LPM ( GPM) LPM (3.-.5 GPM) LPM (.3-.7 GPM) P 1/ NPTF (B1--*P) P 3/8 NPTF (B1--*P) 8P 1/ NPTF (B1--*8P) T SAE- (B1--*T) TT SAE- (B1--TT) 8T SAE-8 (B1--*8T) T8T SAE-8 (B1--T8T) B 3/8 BSPG (B1--B) Steel body only. fr11.pm.5, bl, / FC1

3 P.C. Flow Control Valve Series FC11 Compensated Flow Control. For additional information see Technical Tips on pages FC1-FC. Compact size for reduced space requirements Free flow in reverse condition Full Flow Outlet Metered Flow Metered Flow Outlet Free Flow Maximum Flow Maximum 5.5 LPM (15 GPM) 1 Bar (3 PSI) Performance Curves Regulated Flow vs. Drop (Through cartridge only) 8 3 Min. Operating Cartridge See Regulated Flow vs. Curve - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better Regulated Flow Bar PSI Drop ( P) of 5 to SSU ( to cst) Drop vs. Flow (Through cartridge only) PSI Bar kg (.5 lbs.) Cavity No. C1- Form Tool Rougher None Finisher NFT1-F Drop ( P) LPM 8 15 GPM 3 Flow (Q) 3 8 fc11.pm.5, bl, / FC17

4 P.C. Flow Control Valve Series FC11 Screw and Knob Adjust - 1/" Internal Hex (1.5) Dia. Knob Tamper Resistant 35. (1.) 58. (.3) Max. 1. (.) 7/8-1 UNF-A Metered Flow Outlet Free Flow 31.8 (1.5) THIRD-ANGLE PROJECTION Full Flow Outlet Metered Flow Ø 15.8 (.) FC11 1 Compensated Flow Control Adjustment Style Flow Range Optional Setting Code Adjustment Style K Knob Adjust ( ) S Screw Adjust T Tamper Resistant Cap (717783) Optional Setting Flow setting specified in.38 LPM (.1 GPM) increments other than standard Code Code Flow Range and Standard Setting LPM (.3-1. GPM) (1.9 LPM (.5 9 Bar (1 PSI) P) LPM (.75-. GPM) (3.8 LPM (1 9 Bar (1 PSI) P) LPM (.-.5 GPM) (11.3 LPM (3 9 Bar (1 PSI) P) 15-3 LPM (.-8. GPM) (.5 LPM ( 9 Bar (1 PSI) P) Code / Kit. No. Omit Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) P 1/ NPTF (B1--*P) P 3/8 NPTF (B1--*P) 8P 1/ NPTF (B1--*8P) T SAE- (B1--*T) TT SAE- (B1--TT) 8T SAE-8 (B1--*8T) T8T SAE-8 (B1--T8T) B 3/8 BSPG (B1--B) Steel body only. fc11.pm.5, bl, / FC18

5 P.C. Flow Control Valve Series FA11 Fully Adjustable, Compensated Flow Control Valve. For additional information see Technical Tips on pages FC1-FC. Fully adjustable from.75 LPM (. GPM) to. LPM (5.5 GPM) All external parts are finished in yellow zinc dichromate. This enables them to withstand a hour salt spray test. Compact size for reduced space requirements Metered Flow Outlet Free Flow Maximum Flow Maximum Maximum Leakage at Shutoff at 15 SSU (3 cst) Cartridge.75 LPM (. GPM). LPM (5.5 GPM) 1 Bar (3 PSI) 8 cc/min. (5 cu. in.min.) at 75% of crack pressure Performance Curves Regulated Flow vs. Drop (Through cartridge only) Regulated Flow C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better Bar PSI Drop ( P) 1 3 of 5 to SSU ( to cst).3 kg (.5 lbs.) Cavity No. C1- Form Tool Rougher None Finisher NFT1-F fa11.pm.5, bl, / FC19

6 P.C. Flow Control Valve Series FA11 Detented Knob.8 (.19) Hollow Hex. 5. (1.) Dia. Knob Tamper Resistant Cap 3. (1.3) 5. (.13) 1.1 (.9) 31.8 (1.5) 7/8-1 UNC-A Ø 15.8 (.) Ø 15.7 (.) THIRD-ANGLE PROJECTION FA11 1 Compensated Flow Control Valve Adjustment Style Optional Flow Setting Code Adjustment Style D Detented Knob K Knob Adjust ( ) S Screw Adjust T Tamper Resistant Cap (717785) Description Flow Setting x 1 i.e. 5 =.5 GPM Code / Kit. No. Omit Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) Code P 1/ NPTF (B1--*P) P 3/8 NPTF (B1--*P) 8P 1/ NPTF (B1--*8P) T SAE- (B1--*T) TT SAE- (B1--TT) 8T SAE-8 (B1--*8T) T8T SAE-8 (B1--T8T) B 3/8 BSPG (B1--*B) Steel body only. fa11.pm.5, bl, / FC

7 Compensated Priority Flow Regulator Valve. For additional information see Technical Tips on pages FC1-FC. Caution: If the priority line is blocked so that no flow can pass through the control orifice; the compensator spool will shift, blocking the bypass port and allowing inlet pressure to go to full system relief pressure. The FP11 cartridge does not provide a pressure relieving function. P.C. Priority Flow Regulator Valve Series FP11 Bypass Priority Maximum Fixed 3. LPM (8 GPM) Priority Flow Adjusted 33.8 LPM (9 GPM) Maximum 5.3 LPM (15 GPM) Flow Minimum See Valve Performance Curves Flow Maximum 5 Bar (35 PSI) Minimum See Valve Performance Curves Accuracy (Fixed) ±% Cartridge design Acts as a fixed orifice in reverse flow condition (Priority line only) Screw and Knob Adjust - 1/" Hollow Hex (1.5) Dia. Knob Adjustment Range (Adj. Version) ±% Nominal Cartridge - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better of 5 to SSU ( to cst).3 kg (.5 lbs.) Cavity No. C1-3 7/8-1 UNF-A Priority Bypass 15.8 (.) (3.3) (.8) 17. (.8). (1.8) Fixed Style 1.8 (.8) 7/8-1 UNF-A Form Tool Regulator NFT1-3R Finisher NFT1-3F THIRD-ANGLE PROJECTION fp11.pm.5, bl, / FC1

8 P.C. Priority Flow Regulator Valve Series FP11 Performance Curves (Through cartridge only) Regulated Flow vs. Load vs. Priority Flow Minimum Operating Flow (Q) Priority Flow Bar PSI Load Load on Bypass - Bar Load on Priority - Bar Bar PSI 1. Minimum Operating Regulated Flow Minimum Flow Flows Regulated Flow Flow vs. Regulated Flow Fixed Style LPM GPM Minimum Flow (Shaded Area) LPM GPM Flow FP11 1 Compensated Flow Regulator Adjustment Style Flow Setting/ Range Optional Setting Code Adjustment Style F K S Fixed Style present at factory Knob Adjust Screw Adjust Code Fixed Style Flow LPM (1 GPM) 7.5 LPM ( GPM) LPM (3 GPM) 15 LPM ( GPM) LPM (5 GPM).5 LPM ( GPM) 7.3 LPM (7 GPM) 8 3 LPM (8 GPM) Optional Setting Flow setting specified in.38 LPM (.1 GPM) increments other than standard Code Knob/Screw Style Flow Range LPM (.7-1. GPM) LPM (.8-1. GPM) LPM ( GPM).-1.1 LPM ( GPM) LPM (.3-3. GPM) LPM ( GPM) LPM (.5-7. GPM) LPM ( GPM) Code / Kit. No. Omit Nitrile / (SK1-3N) V Fluorocarbon / (SK1-3V) Code P 1/ NPTF (B1-3-*P) P 3/8 NPTF (B1-3-*P) 8P 1/ NPTF (B1-3-*8P) T SAE- (B1-3-*T) 8T SAE-8 (B1-3-*8T) B 3/8 BSPG (B1-3-B) 8B 1/ BSPG (B1-3-*8B) Steel body only. fp11.pm.5, bl, / FC

9 Restrictive Type Compensator Valve Series FCR11 Restrictive Type Compensator. This valve is designed to be used in conjunction with an external orifice, fixed or variable, to provide a constant flow regardless of changes in load or pressure. For additional information see Technical Tips on pages FC1-FC. Stable and quiet response Contamination tolerant Standard valve bodies and common cavities Seal variations and other options available Performance Curve Contol P (Through cartridge only) In Regulated Supply Orifice Diameter IN. MM Bar (8 PSI).8 Bar ( PSI) 11 Bar (1 PSI) Ø 15.8 (.) Regulated. (1.8) Supply 1.8 (.8) LPM GPM 3 8 Controlled Flow 38 1 Ø 17. (.8) 7/8-1 UNF-A Maximum Flow Maximum Accuracy Cartridge fcr11.pm.5, bl, / 38 LPM (1 GPM) 5 Bar (35 PSI) ±1% Spring rating to 1 Bar (3 PSI) - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better of 5 to SSU ( to cst).1 kg (.3 lbs.) Cavity No. C1-3 Form Tool Rougher NFT1-3R Finisher NFT1-3F FC FCR11F 1 Compensator Valve (Fixed Style) Code Press. Differential Omit 11 Bar (1 PSI).8 Bar ( PSI) Bar (8 PSI) Code / Kit No. Omit Nitrile / (SK1-3N) V Fluorocarbon/ (SK1-3V) Differential * Add A for aluminum, omit for steel. Steel body only. Code P 1/ NPTF (B1-3-*P) P 3/8 NPTF (B1-3-*P) 8P 1/ NPTF (B1-3-*8P) T SAE- (B1-3-*T) 8T SAE-8 (B1-3-*8T) B 3/8 BSPG (B1-3-B) 8B 1/ BSPG (B1-3-*8B)

10 Restrictive Type Compensator Valve Series FCR11 Restrictive Type Compensator. This valve is designed to be used in conjunction with an external orifice, fixed or variable, to provide a constant flow regardless of changes in load or pressure. For additional information see Technical Tips on pages FC1-FC. Stable and quiet response Contamination tolerant Standard valve bodies and common cavities Seal variations and other options available Performance Curve Contol P (Through cartridge only) Orifice Diameter IN. MM Bar ( PSI) 5.5 Bar (8 PSI) 11 Bar (1 PSI) In Ø.9 (1.) Regulated Regulated 73.8 (.91) Supply Supply 13 (.51) LPM GPM Controlled Flow Ø 8.5 (1.1) 1-5/1-1 UN-A 1-1/" Hex. Maximum Flow Maximum Accuracy Cartridge 15 LPM ( GPM) 5 Bar (35 PSI) ±1% Spring rating to 1 Bar (3 PSI) - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better of 5 to SSU ( to cst).3 kg (.75 lbs.) Cavity No. C1-3 Form Tool Rougher NFT1-3R Finisher NFT1-3F FCR11F 1 Compensator Valve (Fixed Style) Code Press. Differential Omit 11 Bar (1 PSI).8 Bar ( PSI) Code / Kit No. Omit Nitrile / (SK1-3) V Fluorocarbon / (SK1-3V) Differential Code 1T SAE-1 (B1-3-*1T) 1T SAE-1 (B1-3-*1T) fcr11.pm.5, bl, / FC5

11 Priority-Type Compensator Valve Series FCP11 Priority Type Compensator. This valve is designed to be used in conjunction with an external orifice (fixed or variable) to provide a constant flow to the priority port. Excess flow is bypassed through port. For additional information see Technical Tips on pages FC1-FC. () Stable and quiet response Contamination tolerant Standard valve bodies and common cavities Bypass Priority () Supply Performance Curve Contol P (Through cartridge only) Orifice Diameter In. MM Bar ( PSI) 5.5 Bar (8 PSI) 11. Bar (1 PSI) Ø 19.1 (.75) Ø 15.8 (.) Bypass 3.1 (.8) Priority () Supply 1.8 (.8) LPM GPM 3 8 Flow (Q) 38 1 Maximum Flow 5 LPM (15 GPM) Flow Setting 38 LPM (1 GPM) Maximum Accuracy Cartridge 5 Bar (35 PSI) ±1% Spring rating to 1 Bar (3 PSI) - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) SAE Class or better of 5 to SSU ( to cst).1 kg (.3 lbs.) Cavity No. C1- Form Tool Rougher NFT1-R Finisher NFT1-F Ø 17.3 (.8) FCP11F 1 Compensator Valve (Fixed Style) Code Press. Differential Omit 11 Bar (1 PSI).8 Bar ( PSI) Bar (8 PSI) Code / Kit No. Omit Nitrile / (SK1-N) V Fluorocarbon / (SK1-V) 7/8-1 UNF-A Differential Code P 3/8 NPTF (B1--*P) T SAE- (B1--*T) 8T SAE-8 (B1--*8T) B 3/8 BSPG (B1--B) Steel body only. fcp11.pm.5, bl, / FC

12 Priority-Type Compensator Valve Series FCPH11 Priority Type Compensator. This valve is designed to be used in conjunction with an external orifice (fixed or variable) to provide a constant flow to the priority port. Excess flow is bypassed through port. For additional information see Technical Tips on pages FC1-FC. () Stable and quiet response Contamination tolerant Standard valve bodies and common cavities Steel variations and other options available Bypass Priority Supply () Performance Curve Flow vs. Orifice Diameter (Through cartridge only) (IN.) MM Maximum Flow 9. LPM (5 GPM) Flow Setting 75. LPM ( GPM) Maximum Max. Reducing or Relieving Setting 38 Bar (55 PSI) 35 Bar (5 PSI) Orifice Diameter Cartridge - C to C (Nitrile) (- F to + F) C to C (Fluorocarbon) (-5 F to +5 F) LPM GPM Flow (Q) 75.8 SAE Class or better of 5 to SSU ( to cst).8 kg (. lbs.) Cavity No. C1- Form Tool Rougher NFT1-R Finisher NFT1-F fcph11.pm.5, bl, / FC7

13 Priority-Type Compensator Valve Series FCPH11 3. (1.) 37.7 (1.8) 38.1 (1.5) Dia. Knob 39. (1.5) 38.9 (1.53) () Supply 1-1/1-1 UNF-A 1-1/" Hex. Priority 79.7 (3.1) Bypass Ø. (.87) Screw/Knob Version Fixed Cap/Tamper Resistant Version THIRD-ANGLE PROJECTION FCPH11 1 Compensator Priority Type Adjustment Style Differential Code Adjustment Style F Fixed style, present at factory K Knob Adjust ( ) S Screw Adjust T Tamper Resistant Cap (717785) Code Differential Omit 11 Bar (1 PSI) Code / Kit. No. Omit Nitrile / (SK1-) V Fluorocarbon / (SK1-V) Code 1T SAE-1 (B1--*1T) fcph11.pm.5, bl, / FC8