MXV. Vertical Multi-Stage In-Line Pumps. Construction. Applications
|
|
- Agnes Foster
- 5 years ago
- Views:
Transcription
1 MXV Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant bearing sleeves lubricated by the puped liquid. A pup with thrust bearing and sleeve coupling for use of any standard otor with IM V construction. Applications For water supply systes. For clean non-explosive liquids, without solid, filaentary or abrasive atter (with adaptation of sealing aterials on request). A universal pup for civil and industrial use, for pressure-boosting systes, fire-extinguishing systes, high-pressure washing plants, irrigation, agricultural uses and sport installations. Operating conditions Teperature of liquid: fro - C to + C. Operating environent teperature: up to C. Maxiu perissible pressure in pup casing: bar. The electropups MXV series coply with the European Regulation no. /. Motor Standard-type: - pole induction otor, z. Construction IM V (EN -). Motor suitable for operation with frequency converter. Classification schee IE for three-phase otors fro, to,, IE fro,. Insulation class F. Protection IP. three-phase with rated voltage: up to / V; fro / V. Rated speed of rotation ( z): MXV rp MXV rp. MXV -, -, - MXV -, -, - All parts that coe into contact with the liquid, including wet-end covers, are in chroe-nickel stainless steel AISI. Materials (wetted parts) Coponent Material Flange External jacket Suction casing Delivery casing Chroe-nickel steel Stage casing. EN (AISI ) Ipeller Lower cover Upper cover Spacer sleeve Pup sha Chroe-nickel steel Plug. EN (AISI ) Bearing sleeve Corrosion-resistant, ceented carbide Bearing in stage casing Ceraic aluina Mechanical seal ard etal/carbon/epdm. ISO - KU Wear ring PTFE O-rings NBR Internal parts in contact with the liquid in chroe-nickel stainless steel, AISI with pup casing and upper cover in cast iron. Materials (wetted parts) Coponent Material Pup casing Cast iron Upper cover GJL EN External jacket Stage casing Chroe-nickel steel Ipeller. EN (AISI ) Spacer sleeve Pup sha Chroe-nickel steel Plug. EN (AISI ) Bearing sleeve Corrosion-resistant, ceented carbide Bearing in stage casing Ceraic aluina Mechanical seal ISO - KU ard etal/carbon/epdm Wear ring PTFE O-rings NBR Direction of rotation: clockwise as seen fro the otor. Variants (to be specified when ordering) Pup with threaded ports (G). Pup with flanged ports (F). Pup without otor. Pup with standard otor. Other variants (on request) With counter-flanges in chroe-nickel steel. O-rings FPM. Other echanical seal. Pup with otor of Client's choice (if available). Single-phase otor V, up to.. Other voltage ratings. Frequency z. Direction of rotation: anticlockwise as seen fro the otor. Variants (to be specified when ordering) Pup without otor. Pup with standard otor. Other variants (on request) O-rings FPM. Other echanical seal. Pup with otor of Client's choice (if available). Other voltage ratings. Frequency z. Pup with support feet for horizontal installation ( or ). Support feet for horizontal installation, set. Welding counter-flanges, PN (steel).
2 MXV MXV -, -, - MXV -, -, - Designation MXV - G * Series ports in Rated capacity in /h (n rp) Nuber of stages Construction variants special seal code (no code = standard seal) threaded ports flanged ports with otor (or without otor) * with no further designation = with standard otor Regulation (EU) No / G F Designation MXV - * Series ports in Rated capacity in /h (n rp) Nuber of stages Construction variants special seal code (no code = standard seal) with support feet for horizontal installation, variant with otor (or without otor) * with no further designation = with standard otor - The benchark for ost efficient water pups is MEI,. - The efficiency of a pup with a tried ipeller is usually lower than that of a pup with the full ipeller diaeter. The triing of the ipeller will adapt the pup to a fixed duty point, leading to reduced energy consuption. The iniu efficiency index (MEI) is based on the full ipeller diaeter. - The operation of this water pup with variable duty points ay be ore efficient and econoic when controlled, for exaple, by the use of a variable speed drive that atches the pup duty to the syste. Pipe connection Installations../ Vertical installation (Standard).../../../ Pup with threaded ports: pipes screwed into the ports Pup with threaded ports: pipes with union couplings (locally available) Pup with flanged ports: pipes with counter-flanges.. orizontal installation. Variant : suction on the le, delivery on the right. Variant : suction on the right, delivery on the le. Variable parts Variable parts Pup size MXV - MXV Nuber of stages Stage casings with bearing Pup size MXV - MXV Nuber of stages Stage casings with bearing
3 MXV Coverage chart Ip. g.p.. MXV n /in /h l/in./ Ip. g.p.. MXV n /in ,, /h l/in.
4 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in. %. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : NPS. /h ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C V V A*,,,,,,,,,,, A*,,,,,,,,,,, Motor power,,,,,,,, P,, /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in.. %.. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : NPS. /h ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C V V A*,,,,,,,, A*,,,,,,,,,, Motor power,,,,,, P,,,, /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in. %. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : NPS /h. ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C V V A*,,,,, A*,,,,,,,,,,, Motor power P,,,,,,,,,,, /h l/in,,,,,,
7 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in. % NPS. /h.. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D V V A* A*,,,,,,,,,,,, Motor power,,,,, P,,, /h l/in,,
8 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in % NPS /h. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D V V A* A*,,,,,,, Motor power,,,, P,, /h l/in,,,,,,,,,,,,,,,,,,,,,,,
9 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in % NPS Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. /h. = Power with reference to one stage. A* Calpeda otor currents Pup type MXV -/C MXV -/C MXV -/C MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D V V A* A*,,,,,, Motor power,,, P,, /h l/in,,,,,,,,,,,,,,,,
10 - MXV - - MXV Diensions and weights AD Counterflanges in stainless steel M G ISO P () G / / fm ( MX -) G () () a () f G h..../ () af h DE DK DG d Flanges DE EN - PN - DK DG oles N. Ø n n s () Filling () Draining Pup MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV (G) threaded ports MXV (F) flanged ports () () G P ISO af L h f M fm P AD n n,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Motor M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V M V G G G G G G G G G G G G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / () Standard position of terinal box. (for other positions rotate otor through or ),,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, () MXV (F) = MXV (G) + kg () With standard otor s,,,,,,,,,,,,,,,,,,,,, without otor with otor MXV (G) () () kg() kg(),,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, () Net weight
11 - MXV - - MXV Diensions and weights AD - P () M DG DK DE DG DK DE G / () G / () f G / () G / () fm Flanges EN - PN - oles DE DK DG N. Ø h a../ G / () () () () Filling and air vent () Air vent suction side () Draining G / ()../ Ø Pup Motor without otor with otor () () MXV () () P a h f M fm P AD kg () kg () MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/C MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D MXV -/D,,,,,,,, M V M V M V M V M V M V M V M V M V M V M V M V,,,,,,,,,,,,, MXV -/C, M V,, MXV -/C,, M V,, MXV -/C, M V,, MXV -/D M V MXV -/D M V MXV -/D M V MXV -/D M V MXV -/D, M V, MXV -/D, M V, MXV -/D M V MXV -/C, M V,, MXV -/C,, M V,, MXV -/C, M V,, MXV -/D M V MXV -/D M V MXV -/D M V MXV -/D, M V, MXV -/D M V () Standard position of terinal box. (for other positions rotate otor through or ) () MXV (L) : + kg () With standard otor () Net weight MXV () : + kg
12 MXV - Characteristic curves and perforance n rp. Ip. g.p... MXV - % NPS. /h l/in /h., Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV -,,,,,,,,,,, Motor power P,,,,,,,,,,, /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - % NPS. /h l/in... Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. /h. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV -,,,,,,,,,, Motor power P,,,,,,,,,, /h l/in,,,,,,,,,,,,,,,,,,,,,,
14 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in. % NPS /h..... Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV -,,,,,,,,,,, Motor power P,,,,,,,,, /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - % NPS /h l/in.... Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec.. /h. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV -,,,,,,,,,,,, Motor power P /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16 MXV - Characteristic curves and perforance n rp MXV - Ip. g.p.. % NPS /h l/in.. Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. /h. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - Motor power,,,,,,,, P /h l/in,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17 MXV - Characteristic curves and perforance n rp Ip. g.p.. MXV - /h l/in. % NPS.... Test results with clean cold water, without gas content. A safety argin of +. is recoended for the NPS value. Tolerances in accordance with UNI EN ISO : ead and power values valid for liquids with density ρ =, kg/d and kineatic viscosity ν = ax /sec. /h. = Power with reference to one stage. Pup type MXV - MXV - MXV - MXV - MXV - MXV - Motor power,,,,, P /h l/in,,,,,,,,,,,,,,,,,,,,,,,
18 - MXV - - MXV Diensions and weights AD Counterflanges in stainless steel M G ISO P () G / / fm ( MXV -) G () () a () f G h..../ () af h DE DK DG d Flanges DE EN - PN - DK DG oles N. Ø n n s () Filling () Draining Pup MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV (G) MXV (F) Motor threaded flanged ports ports P () () G ISO a af h f M fm P AD n n,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, A A A A A A A A A A A A A A A A A A A A A A A A A A A A B B S S G G G G G G G G G G G G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / G / () Standard position of terinal box. (for other positions rotate otor through or ) s,,,,,,,,,,,,,,,,,,,,, () MXV (F) = MXV (G) + kg () With standard otor without otor with otor MXV (G) () () kg () kg () () Net weight
19 - MXV - - MXV Diensions and weights AD - P () M DG DK DE DG DK DE G / () G / () f G / () G / () fm Flanges DE DK EN - PN - DG oles N. Ø h a../ G / () () () () Filling and air vent () Air vent suction side () Draining G / ()../ Ø Pup Motor without otor with otor MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - MXV - P a h f,,,,,,,,,,,,,,,,,,,,,,,,, LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LB LB LA LA LA LA LA LB () () M fm P AD MXV () kg () () kg () () Standard position of terinal box. (for other positions rotate otor through or ) () MXV (L) : + kg () With standard otor () Net weight MXV () : + kg
20 MXV Features Long Service Life with Standard Motor Pup with thrust bearing without additional axial loads on the otor bearings. Any standard otor V design (suitable to be lied in vertical position) can be used, of our choice or of Client s choice. Easy Assebly of the Motor With the single-piece sleeve coupling the pup unit can be supplied fully assebled also without the otor. This eliinates the risk of daage caused by shiing of the pup sha during transportation. The otor is siply inserted in the coupling and fastened to the flange without the necessity for adapting the axial position of the pup sha. Extra Safety Single-piece coupling guard to be reoved only by eans of a tool, positioned around the lantern bracket, thus avoiding accidental pushing and rubbing against the coupling. Low Cost Installation Vertical construction with reduced pup height for installation in sall spaces. In-line connections to siplify the piping layout with the possibility of inserting the pup in straight pipe-lines. Disassebly, inspection or cleaning of internal parts without reoval of piping... MXV -, -, - Robust and Reliable Single PN construction for all pup sizes. The suction and discharge nozzles arranged in-line absorb the forces of the piping on the pup without the creation of distorting loads causing local friction and early wears. The lantern brackets copact and robust design aintains a sure alignent between rotating and fixed parts, reducing vibration. The upper cover design prevents entrapent of air around the echanical seal. Low-Noise Operation The water filled shroud around the stages and thick external walls, work together for low-noise operation. Low-noise standard otor... MXV -, -, -
21 MXVL AISI L The electropups MXVL series coply with the European Regulation no. /. Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant bearing sleeves lubricated by the puped liquid. A pup with thrust bearing and sleeve coupling for use of any standard otor with IM V construction. Applications For water supply systes. For clean non-explosive liquids, without solid, filaentary or abrasive atter (with adaptation of sealing aterials on request). A universal pup for civil and industrial use, for pressure-boosting systes, fire-extinguishing systes, high-pressure washing plants, irrigation, agricultural uses and sport installations. Operating conditions Teperature of liquid: fro - C to + C. Operating environent teperature: up to C. Maxiu perissible pressure in pup casing: bar. Motor Standard-type: - pole induction otor, z. Construction IM V (EN -). Motor suitable for operation with frequency converter. Classification schee IE for three-phase otors fro, to,, IE fro,. Insulation class F). Protection IP. three-phase with rated voltage: up to / V; fro / V. Rated speed of rotation ( z): MXVL rp MXVL rp. MXVL -, -, - MXVL -, -, - All parts that coe into contact with the liquid, including wet-end covers, are in chroe-nickel-olybdenu stainless steel AISI L. Materials (wetted parts) Coponent Material Flange External jacket Suction casing Delivery casing Chroe-nickel-olybdenu steel Stage casing. EN (AISI L) Ipeller Lower cover Upper cover Spacer sleeve Pup sha Chroe-nickel-olybdenu steel Plug. EN (AISI L) Bearing sleeve Corrosion-resistant, ceented carbide Bearing in stage casing Ceraic aluina Mechanical seal ard etal/carbon/epdm. ISO - KU Wear ring PTFE O-rings NBR Internal parts in contact with the liquid with pup casing and upper cover in chroe-nickel-olybdenu stainless steel AISI L. Materials (wetted parts) Coponent Material Pup casing Chroe-nickel-olybdenu steel Upper cover. EN (AISI L) External jacket Stage casing Chroe-nickel-olybdenu steel Ipeller. EN (AISI L) Spacer sleeve Pup sha Chroe-nickel-olybdenu steel Plug. EN (AISI L) Bearing sleeve Corrosion-resistant, ceented carbide Bearing in stage casing Ceraic aluina Mechanical seal ISO - KU ard etal/carbon/epdm Wear ring PTFE O-rings NBR. Direction of rotation: clockwise as seen fro the otor. Variants (to be specified when ordering) Pup with threaded ports (G). Pup with flanged ports (F). Pup without otor. Pup with standard otor. Other variants (on request) With counter-flanges in chroe-nickel steel. O-rings FPM. Other echanical seal. Pup with otor of Client's choice (if available). Single-phase otor V, up to.. Other voltage ratings. Frequency z. Direction of rotation: anticlockwise as seen fro the otor. Variants (to be specified when ordering) Pup without otor. Pup with standard otor. Other variants (on request) O-rings FPM. Other echanical seal. Pup with otor of Client's choice (if available). Other voltage ratings. Frequency z. Pup with support feet for horizontal installation ( or ). Support feet for horizontal installation, set. Welding counter-flanges, PN (steel).
22 MXVL AISI L MXVL -, -, - MXVL -, -, - Designation MXV L - G * Series AISI L vesion ports in Rated capacity in /h (n = rp) Nuber of stages Construction variants special seal code (no code = standard seal) threaded ports flanged ports with otor (or without otor) * with no further designation = with standard otor G F Designation MXV L - * Series AISI L vesion ports in Rated capacity in /h (n = rp) Nuber of stages Construction variants special seal code (no code = standard seal) with support feet for horizontal installation, variant with otor (or without otor) * with no further designation = with standard otor Regulation (EU) No / - The benchark for ost efficient water pups is MEI,. - The efficiency of a pup with a tried ipeller is usually lower than that of a pup with the full ipeller diaeter. The triing of the ipeller will adapt the pup to a fixed duty point, leading to reduced energy consuption. The iniu efficiency index (MEI) is based on the full ipeller diaeter. - The operation of this water pup with variable duty points ay be ore efficient and econoic when controlled, for exaple, by the use of a variable speed drive that atches the pup duty to the syste. Pipe connection Installations../ Vertical installation (Standard).../../../ Pup with threaded ports: pipes screwed into the ports Pup with threaded ports: pipes with union couplings (locally available) Pup with flanged ports: pipes with counter-flanges.. orizontal installation. Variant : suction on the le, delivery on the right. Variant : suction on the right, delivery on the le. Variable parts Variable parts Pup size MXVL - - MXVL Nuber of stages Stage casings with bearing Pup size MXVL - MXVL Nuber of stages Stage casings with bearing
23 MXVL AISI L Coverage chart Ip. g.p.. MXVL n /in /h l/in./ Ip. g.p.. MXVL n /in ,, /h l/in. For characteristic curves, diensions and weights see cap.
24 MXVL AISI L Features Long Service Life with Standard Motor Pup with thrust bearing without additional axial loads on the otor bearings. Any standard otor V design (suitable to be lied in vertical position) can be used, of our choice or of Client s choice. Easy Assebly of the Motor With the single-piece sleeve coupling the pup unit can be supplied fully assebled also without the otor. This eliinates the risk of daage caused by shiing of the pup sha during transportation. The otor is siply inserted in the coupling and fastened to the flange without the necessity for adapting the axial position of the pup sha. Extra Safety Single-piece coupling guard to be reoved only by eans of a tool, positioned around the lantern bracket, thus avoiding accidental pushing and rubbing against the coupling. Low Cost Installation Vertical construction with reduced pup height for installation in sall spaces. In-line connections to siplify the piping layout with the possibility of inserting the pup in straight pipe-lines. Disassebly, inspection or cleaning of internal parts without reoval of piping... MXV -, -, - Robust and Reliable Single PN construction for all pup sizes. The suction and discharge nozzles arranged in-line absorb the forces of the piping on the pup without the creation of distorting loads causing local friction and early wears. The lantern brackets copact and robust design aintains a sure alignent between rotating and fixed parts, reducing vibration. The upper cover design prevents entrapent of air around the echanical seal. Low-Noise Operation The water filled shroud around the stages and thick external walls, work together for low-noise operation. Low-noise standard otor... MXV -, -, -
MXV-E. Variable Speed Multi-Stage Vertical Pumps (max 2900 rpm)
Variable Speed Multi-Stage Vertical Pups (ax 9 rp) Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant
More informationIn-line Twin Pumps. Fields of Application. Medium Handled Liquids not chemically or mechanically aggressive to the pump materials.
Type Series Booklet./- In-line Twin Pups Fields of Application F Heating systes F Air-conditioning systes F Cooling circuits F Water supply systes Mediu Handled Liquids not cheically or echanically aggressive
More informationSTN. Plastic Magnetic Drive Centrifugal Pumps STN 40 PP-GF. Pompe S.r.l. Available upon request :
STN Plastic Magnetic Drive Centrifugal Pups STN 40 PP-GF Copact, Plastic and Fluoroplastic Magnetic drive Horizontal - Single Stage - Centrifugal pups PP-GF (Polypropylene-Glass filled) - CFR-ETFE (Carbon
More informationKPS - KPF - KP GENERAL DATA PERIPHERAL PUMPS
KS - KF - K ERIERL UMS KS /6 KF /6 K 8/8 K 6/6 - K 6/2 GENERL DT pplications eripheral centrifugal pup with copact diensions. ble to generate high heads and suitable for doestic installations, water supply
More informationVPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More information50Hz. water solutions. O SerieS DGO DRO
Hz water solutions O SerieS DGO DRO D a t a b o o k l e t EN water solutions O SerieS DGO DRO Hz D a t a b o o k l e t O SERIES O Series General characteristics AISI stainless steel lifting and carrying
More informationPage - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302
CONTENTS. Page - SPECIFICATIONS 200 SPECIFICATION 200 SELECTION CHART PFC 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 204 PERFORMANCE CURVE 3 205 PERFORMANCE CURVE
More informationTPR Series. Vertical Multistage Centrifugal Pumps. 60Hz
TPR Series Vertical Multistage Centrifugal Pumps z Contents General Data Performance Range Product Range Applications Pump Motor Operating Conditions TPR Materials TPR(S)(N) Materials Type Key Operating
More informationThe Handtmann Armaturenfabrik. Safety without compromise. Safety valves for liquids, gases, and steam
The Handtann Araturenfabrik Safety without coproise for liquids, gases, and stea f Safety Valves FoodSafe Tradition Meets Innovation fro Handtann are first choice for hygienically sensitive product areas
More informationOn-Off switch. Selectable manual control for commissioning. Remote start input for control via an irrigation controller, or external sensor.
SPEEDMAN VARIABLE SPEED PUMP SET VARIABLE SPEED PUMP SET PRODUCT DESCRIPTION Variable speed / constant pressure system consisting of a Davey VM vertical multistage pump with Speedman controller, VSD unit,
More informationSubmersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series
Submersible Electric Pumps for drainage of clean and slightly dirty water DIWA Series Submersible pumps for clean and slightly dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres,
More information4/S8 CONSTANT VOLUME DAMPERS RKP-C, RKP-C-N, RKP-P, KVR-R. v 2.6 (en)
4/S8 v 2.6 (en) RKP-C, RKP-C-N, RKP-P, KVR-R 294 www.kliaoprea.hr www.kliaoprea.hr 295 INSTAATION RKP-C RKP-C -2... C 5...% rh ±5% set value Working teperature : Relative huidity: Constant flow: 1 x ØD
More informationMZT PUMPI PUMP YOUR WAY TO SUCCESS MULTISTAGE CENTRIFUGAL PUMPS - MS,DMS,MSTD,MSS
UM YOUR WAY TO SUCCESS MULTISTAGE CENTRIFUGAL UMS - MS,DMS,MSTD,MSS Catalog 9 CONTENT GENERAL DATA.................................................... 3 Description.......................................................
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with
More informationHand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
More informationDEEP WELL SUBMERSIBLE PUMPS. An ISO 9001 & Company
C.R.I. PUMPS DEEP WELL SUBMERSIBLE PUMPS EVERGREEN SERIES - 5Hz An ISO 91 & 141 Company Submersible Pumps C.R.I. Submersible Pumps are the products of the expertise gained from over four decades of experience,
More informationSolenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design, Pressure range: Suction volume flow: 33 to 113 mbar 3 to 58 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated and
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationTA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative
More informationGMD20..NL, GMD30..NL* GHV20..NL, GHV30..NL* GHV40..NL, GTKS20..NL* Series
GMD20..NL, GMD30..NL* GHV20..NL, GHV30..NL* GHV40..NL, GTKS20..NL* Series Fixed and Variable speed Booster sets Maximum operating pressure 16 bar. Flow rates up to 56 m 3 /h 50 Hz * FOR NEDERLAND MARKET
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationLiquid ring vacuum pumps single-stage
Liquid ring vacuum pumps single-stage LPH 40106, LPH 40411, LPH 40516 Pressure range: Suction volume flow: 150 to 1013 mbar 50 to 270 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum pumps are displacement
More informationKSB Delta Compact Type Series Booklet
Pressure Booster System KSB Delta Compact Type Series Booklet Legal information/copyright Type Series Booklet KSB Delta Compact All rights reserved. The contents provided herein must neither be distributed,
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationSTAINLESS STEEL GRAND SERIES
STAINLE STEEL GRAND SERIES STAINLE STEEL GRAND SERIES DEEPWELL SUBMERSIBLE PUMPS STAINLE STEEL - GRAND SERIES C.R.I. Always equips itself in advance to face the exponentially growing technological challenges
More informationDesign. Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing. Working Principle
SB Pompetravaini-NSB API SB Liquid Ring Compressor for Gas Processing A family of API liquid ring compressors has been developed and has been in the market for nearly a decade, they are specifically made
More informationPRODUCTS CATALOGUE 2017 / Torino - Strada Settimo 388/15 Tel (+39) /43 Fax (+39)
PRODUCTS CATALOGUE 2017 / 2018 10156 Torino - Strada Settimo 388/15 Tel (+39) 011.223.68.42 /43 Fax (+39) 011.223.67.67 info@ebarbero.com www.ebarbero.com CATALOGO INDEX PRODOTTI 2017 / 2018 Pumps for
More informationSIHI LPH-X - Liquid Ring Compressors
- Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a
More informationOPERATING INSTRUCTIONS MANUAL FOR QACV PNEUMATIC DOSING PUMP
This operating instructions contains safety information that if ignored can endanger life or result in serious injury. They are indicated by this icon. Use of this pump with radioactive chemicals is forbidden!
More informationTechnical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
More informationFixed Displacement Pump KFA for commercial vehicles in open circuits
RE 91 501/05.98 Replaces: 11.96 Fixed Displacement Pump KFA for commercial vehicles in open circuits Sizes 23...107 Series 6 Nominal pressure 300 bar Peak pressure 350 bar KFA List of contents Features
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationLiquid ring compressors
Liquid ring compressors KPH 85220, KPH 85227 Compression pressures: Suction volume flow: 2 to 7 bar 940 to 1450 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
More informationKSB Delta Compact Type Series Booklet
Pressure Booster System KSB Delta Compact Type Series Booklet Legal information/copyright Type Series Booklet KSB Delta Compact All rights reserved. The contents provided herein must neither be distributed,
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationBall Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 26, LEM 51 Pressure range: Suction volume flow: 33 to 113 mbar 3 to 58 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges GN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless steel filter Bolted
More informationThe flow direction must be observed during installation. It can be recognized by the following features: Flow direction. Gasket
6.2 Installation of the Safety Valve The correct installation within a plant is essential for the proper operation of a safety valve. Installation in this sense is e.g. - the choice of the gaskets - the
More informationAccessories. Accessories for pressure maintenance
Accessories Accessories for pressure aintenance IMI PNEUMATEX / Accessories and ervice / Accessories Accessories High quality accessories coplete the range of PNEUMATEX pressure aintenance products. Thus
More informationOXYGEN and SYSTEM OXY
OXYGEN and SYSTEM OXY Used to mix the treated liquid with air allowing a high degree of oxygen exchange Particularly indicated for an efficient oxigenation in waste water treatment plant as well as industrial
More informationRP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
More informationFixed Displacement Motor A4FM
Fixed Displacement Motor 4FM RE 91 12/4. replaces: 3.95 and RE 91 1 for open and closed circuits Sizes 22...5 Series 1, Series 3 Nominal pressure up to bar Peak pressure up to 45 bar Index Features 1 Ordering
More informationPressure and Flow Control Valves DBGM, German and European Patents
Pressure and Flow Control Valves DBGM, German and European Patents Absolutely Reliable Pressure and Flow Control In water mains of sizes DN 50 to DN 150, ERHARD Control Valves in straight or angle pattern
More information60HZ XIANDAI PUMP. CDL/CDLF Vertical Multistage Pump ZHEJIANG XIANDAI PUMP CO.,LTD. ZHEJIANG XIANDAI PUMP CO.,LTD.
TECNICAL DATA INCLUDED IN TIS BROCURE MAY BE CANGE FROM TIME TO TIME DUE TO TE PRODUCT IMPROVEMENTS UNDERTAKES BY TE MANUFACTURER. TE COMPANY RESERVES TE UNCONDITIONAL RIGTS TO IMPLEMENT SUC CANGES WITOUT
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationS1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators
0231150/8 IM-P023-55 ST Issue 8 S1, S2, S3, S5, S6, S7, S8, S12 and S13 Separators Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 25, LEM 5 Pressure range: Suction volume flow: 33 to 113 mbar 4 to 6 m³/h CONSTRUCTION SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated
More informationE 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow
More informationEtanorm V Type Series Booklet
Vertical Low-pressure Pump Etanorm V Type Series Booklet Legal information/copyright Type Series Booklet Etanorm V All rights reserved. The contents provided herein must neither be distributed, copied,
More informationDisplacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
More informationCALEFFI. Flow rate metering device. 683 series 01040/10 GB. Function
low rate metering device 683 series CCRI 040/ GB ISO 900 M 64 ISO 900 No. 0003 unction he flow rate metering device is used to measure the flow rate within a circuit. When used for central heating purposes,
More informationSTAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
More informationMSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection
1170850/1 IM-P117-36 ST Issue 1 MSC-P and MSC-N Manifolds for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1. Safety information 2. General product information
More informationTA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
More informationKBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions
4059051/3 IM-P405-48 EMM Issue 3 KBV21i and KBV40i Key Operated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4.
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationTurbo Blowers. Combustion Excellence Since Features. Benefits
Turbo Blowers Features Integral molded scroll design Turbine bladed impeller Steel inlet guard Precisely balanced impellers eliminate vibration Complete line of available accessories for adapting to any
More informationCALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
More informationSteam Trap BK 15 (DN40, DN 50) Original Installation Instructions English
Steam Trap BK 15 (DN40, DN 50) EN English Original Installation Instructions 810682-03 1 Contents Page Important Notes Usage for the intended purpose... 4 Safety note... 4 Danger... 4 Attention... 4 Application
More informationSTAD. Balancing valves DN 15-50
STAD Balancing valves DN 15-50 IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the
More informationDual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications
Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents
More informationNeotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions
Before installation these instructions must be fully read and understood 2 Safety Please read these instructions carefully. 2.1 General danger potential Not paying attention to this instruction Incautious
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationTelefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationCRP INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SAMPLING VALVES
CRP INSTALLATION, OPERATING AND MAINTENANCE INFORMATION FOR INLINE SAMPLING VALVES Sampling Valves Installation Commissioning and Operating Instructions SD IL 300 & SD IL 400 Inline Sampling Valve This
More informationLevel switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
More informationSelf-Aligning Cylindrical Roller Bearings. Plummer Block Housing. Series ACB, sealed on both sides. Series SLG01
Self-Aligning Cylindrical Roller Bearings Series ACB, sealed on both sides Plummer Block Housing Series SLG01 KRW Self-Aligning Cylindrical Roller Bearings sealed on both sides ACB self-aligning cylindrical
More informationLevel switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
More informationTechnical information
Technical information 1.1 Design Elektror medium pressure blowers of the RD range are radial ventilators with double-wall impellers made from sheet aluminium respectively from sheet steel. They are directly
More informationVariable Displacement Double Pump A20VO. Series 1, for open circuits Axial piston - swashplate design, Back to back - design
Brueninghaus Hydromatik Series 1, for open circuits Axial piston - swashplate design, Back to back - design RE 93100/02.97 Sizes 60...260 Nominal Pressure up to 350 bar Peak Pressure up to 400 bar Preliminary
More informationExpansion Vessels for Potable Installations
4. Expansion Vessels for Potable Installations Domestic installations lose millions of litres of potable water due to expansion water leaking from the vent and expansion pipe. Flamco s Airfix diaphragm
More informationOverflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationTA-FUSION-P. NPT threads / ANSI flanges
TA-FUSION-P NPT threads / ANSI flanges Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P
More informationNeotecha SAPRO - Tank Valve Type ST for aseptic sampling with bottles Installation, Operation and Maintenance Instruction
7 Before installation these instructions must be fully read and understood 1.4 Illegal technical changes It is illegal to do mechanical changes of the design of the Sapro tank valve, or to use parts of
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationProp. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
More informationTA-Modulator. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control
TA-Modulator Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control IMI TA / Control valves / TA-Modulator TA-Modulator The
More informationDN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
More informationProportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
More informationGRUNDFOS DATA BOOKLET. Hydro Solo-E. Complete pressure boosting systems 50/60 Hz
GRUNDFOS DATA BOOKLET Complete pressure boosting systems 5/6 z Contents Product data Performance range 3 Operating conditions Inlet pressure Type key Product range 5 Construction 5 Installation 5 Mechanical
More informationFixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
More informationSeated valves VRB 3, VRG 3
Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations
More informationABS lifting unit 2,3 kn
1 597 0533 GB 04.2014 en Installation and Operating Instructions Translation fro original instruction www.sulzer.co Installation and Operating Instructions for (for DL6151113) 2 Sulzer reserves the right
More informationLiquid ring compressor
Liquid ring compressor KLH 47005, KLH 47105 Compression pressures: Suction volume flow: 2 to 11 bar 56 to 65 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors of
More informationSCA Series Inverted Bucket Steam Traps
0770050/5 IM-P077-06 ST Issue 5 SCA Series Inverted Bucket Steam Traps Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning
More informationTRAILED SPRAYERS RPS SERIES
TRAILED SPRAYERS RPS SERIES The outstanding quality of the new series of trailed sprayers fro Lochann Plantatec is the result of over fifty years of practical experience, the application of state-of-the-art
More informationMonitoring device NTS 30
P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit
More informationKBV21i and KBV40i Air Actuated Boiler Blowdown Valves
4059051/1 IM-P405-48 AB Issue 1 KBV21i and KBV40i Air Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
More informationSUCTION FILTERS. BYPASS VALVE Setting: 30 kpa (0,30 bar) ± 10% WORKING TEMPERATURE From -25 to +110 C
COMPONNTS SUCTION ILTRS S MATRIALS Head: Aluiniu alloy Spinon cartridge: Steel ypass valve: Polyaide Seals: NR Nitrile (KM on request fl uoroelastoer) Indicator housing: rass APPLICATION XAMPL PRSSUR (ISO
More informationPressure regulating valves Types OFV, OFV-SS
Data sheet Pressure regulating valves Types OFV, OFV-SS OFV are angle-way pressure regulating valves, which have ajustable opening pressure and cover the differential pressure range ( P): 2-8 bar (29 116
More informationMagnetic Level Gauges
Bulletin B 03 04 Magnetic Level Gauges Remote Reading Systems Magnetic Level Switches Magnetic level gauges OPERATING PRINCIPLE The operation of the magnetic level gauge is based on some elementary physical
More informationSTAD-C. Balancing valves DN 15-50
STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated
More informationMaterials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
More information