WELDING TOOLS AND ACCESSORIES

Size: px
Start display at page:

Download "WELDING TOOLS AND ACCESSORIES"

Transcription

1 WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Hoses / Automatic roller for oxygas hoses Quick action coupling to 91 Cutting nozzles and other flame accessories

2

3 HOSES HOSES EN ISO 3824 Gas Ø Maximum pressure (bar) Coil length (m) Single hoses Acetylene 6.3 x W Oxygen 6.3 x W Acetylene 6.3 x W Oxygen 6.3 x W Acetylene 6.3 x W Oxygen 6.3 x W Acetylene 6.3 x W Oxygen 6.3 x W LPG* 6.3 x W LPG* 6.3 x W Acetylene 10 x W Oxygen 10 x W Acetylene 10 x W Oxygen 10 x W Acetylene 10 x W Oxygen 10 x W LPG 10 x W LPG/Acetylene* 10 x W Oxygen 8 x W Acetylene 8 x W Argon 6.3 x W Argon 10 x W Twin hoses TWIN (Oxygen - Acetylene) 6.3 x W TWIN (Oxygen - Acetylene) 6.3 x W TWIN (Oxygen - Acetylene) 8 x W TWIN (Oxygen - Acetylene) 10 x W TWIN (Oxygen - LPG)* 10 x W * Propylene excluded THE DATE PRINTED ON THE HOSE IS THE MANUFACTURING DATE _ret AUTOMATIC ROLLER FOR OXYGAS HOSES TUBEREEL AUTOMATIC ROLLER FOR OXYGAS HOSES Automatic roller for twin hoses diameter 8 or 10 mm. Automatic roller for twin hoses diameter 8 or 10 mm. Allows the operator to choose the hose length suitable to his application Maximum length for inside diameter 8 mm: 20 m Maximum length for inside diameter 10 mm: 15 m Provided without hoses On the ground Roller s dimensions On a wall W From the ceiling 89

4 ISO EN 561 QUICK ACTION COUPLINGS QUICK ACTION COUPLINGS is the new range of quick couplings designed and manufactured by Weldline. Safety, Performance and Easy to Use are keys words that characterize this new range. is avalable in several versions: By type of gas - presence of a mechanical coding For mounting on the regulator, between pipes and on the blowpipe With integrated FBA (Flash Back Arrestor) Advantages: Safety - Gas flow stopped during disconnection due to an internal mechanism - Specific design limiting accidental disconnections Ease of use and ergonomics - «Push System» connection with automatic locking - Studied design to allow to use with one hand Perfomances - 4 levels of tightness - Compatible with any welding or cutting blowpipe thanks to limited pressure looses Connection between hoses A 1 Fuel Gas 2 Oxygen Ø hoses Female connector Male connector 6.3 and 10 W W and 8 W and 10 W W and 8 W Neutral gas (Argon,...) 4 and 6.3 W W Recommendations for use Flame installation Also available in kits : Females kit Tested and approuved by Males kit Separated flash-back arrestor (to place as close as possible from the flame) A Integrated flash-back arrestor W W C D Female / Male kit W Regulator connection B 4 Fuel gas 5 Oxygen 6 Neutral gas (Argon,...) 4 Thread Ø hoses M16 x 150 Left W and 10 3/8 Left W M16 x 150 Right W /8 Right 6 and 10 W /4 Right W x 100 Right W /8 Right 4 W /4 Right W Female connector Male connector W W W Blowpipes entry connection C Thread 7 with integrated FBA D SECURTOP 662 Inlet hoses Outlet Ø 6.3 and 10 W Oxygen Ø 6,3 and 8 W Fuel Gas Fuel gas Oxygen Kit Oxygen + Fuel gas 16 x 150 Left 16 x 150 Right W Male connector W Ø 6.3 and 10 Ø 6.3 and 8 Ø 6.3 and 10 Ø 6.3 and 8 female 7 W W W W

5 Visit our factory B B A Usable with neutral gas also: between hoses, on regulator. Mounting on thread Thread 8 Fuel gas 16x150 Left W /8 Left W x150 Right W Oxygen 3/8 Right W /4 Right W Female coupling Technical characteristics and usable gases: Label Gas Pressure Letter Color Name Letter max. (bar) * Maximal flowrate without flash-back arrestor Max Flowrate (m 3 /h)* Acetylen A 1,5 14 Propane P 5 22 F Red Hydrogen H Methane M 5 40 MPS Y 5 24 Propylene L Blue Oxygen Air D 90 N Black CO 2 B Nitrogen, neutral gas N 92 91

6 CUTTING NOZZLES AND ACCESSORIES G1 cutting nozzles and IC cutting nozzles CUTTING NOZZLES AND ACCESSORIES G1 profi le Acetylene Gauge Cutting thickness IC profi le Acetylene Tip cleaners Used to clean welding and cutting nozzles to restore nozzle performance. Contains a range of round needle files in a metal carry case. THERMISHIELD See page 96 W / W W / W W / W W / W W / W W / W W W / W Spark lighter Propane Propane W / W W / W W Traditional tool with five renewal flints. W / W W / W W / W W / W W / W PROTECFLAM W Gun model with ten renewal flints. Heat shield protection for walls and floors during gas welding, brazing or soldering. PROTECFLAM Single use 200 x 250 mm Asbestos free Inspection mirrors Mirror with magnetic stand W Blister pack of 3 shields W PROTECFLAM TECH Very flexible (memory effect) Long life duration - Both sides usable 200 x 250 mm No toxic fumes release Circular telescopic mirror W Spare part: mirror W R For all angle viewing. Fast and accurate visual inspection of hidden areas with an almost limitless number of positions. W

Gas Welding Hoses and connections, the weak link

Gas Welding Hoses and connections, the weak link Gas Welding Hoses and connections, the weak link By Leif Andersen, Technical Product Manager Welding, WSS Regulators with flashback arrestors and the shank with its welding or cutting attachment are made

More information

Product Catalogue 2018

Product Catalogue 2018 Product Catalogue 2018 Oxy-fuel Cutting and Welding Technology Mechanische Werkstätten Wurzen GmbH Oxy-fuel Cutting and Welding Technology Mould and Tool Production Oxy-fuel Cutting and Welding Technology

More information

OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS

OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS Items needed for demonstrations: Fire extinguisher PPE (Personal Protective Equipment): o Lab coats/welding jackets o Leather gloves

More information

PRESSURE CONTROL REGULATORS

PRESSURE CONTROL REGULATORS REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities

More information

Specifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA

Specifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA WELDING, BRAZING AND CUTTING KITS Tesuco offers a range of oxygen / acetylene and oxygen / LPG kits to suit the industries they are designed for. This includes complete cutting and welding kits and kits

More information

CI-SfB 732 (5-1) x. - laboratory fittings

CI-SfB 732 (5-1) x. - laboratory fittings CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves

More information

Visit our Web site: http: //

Visit our Web site: http: // CONTENTS: Medium Duty Victor Style Welding And Cutting Outfit MANUFACTURED BY AN ISO 9001 REGISTERED FIRM Visit our Web site: http: // www.northerntool.com TABLE OF CONTENTS Page INTRODUCTION... 1 SECTION

More information

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through

More information

Section 6. Gas Welding & Cutting

Section 6. Gas Welding & Cutting Section 6. Gas Welding & Cutting TronicFlame Gas Welding & Cutting Kits GCWKIT-AB1 GWKOA Welding & Cutting Kit-Oxy/Acet With FBA's 1 Ea. 9346277041966 GCWKIT-LB1 GWKOL Welding & Cutting Kit-Oxy/LPG With

More information

Genuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment.

Genuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment. Gas Kits These kits contain CIGWELD s renowned COMET Regulators, Blowpipe and Cutting Attachment. COMET Custom Kit COMET Regulators Independently certified to AS4267 (COMET TM 700 & 500 Oxygen & Acetylene

More information

How Flashback Arrestors Work

How Flashback Arrestors Work What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors

More information

One Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT.

One Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT. One Piece Cutting Torch Cuts 300 mm QUALITY GAS EQUIPMENT www.tesuco.com.au Cuts 300 mm Key Features Gas specific injector designed for maximum efficiency For cutting up to 300 mm and for gouging applications

More information

Air-Propane Equipment QUALITY GAS EQUIPMENT.

Air-Propane Equipment QUALITY GAS EQUIPMENT. Air-Propane Equipment QUALITY GAS EQUIPMENT www.tesuco.com.au Combination Chart SNT1000 SNT600 M20 x 1 SNT220 SSB80-SPX SNT75 M20 x 1 SNTBSB7 SNTBSB5 SNTBSB3 SSB80 SBM2B SNTBT28M SNTBT22M M14 x 1 SNTBT18M

More information

Gas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT.

Gas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT www.tesuco.com.au Introduction Beginning in 1988, Tesuco has established itself as a specialist equipment supplier for all gas welding, heating

More information

BRAZING EQUIPMENT PORTAPAK KIT

BRAZING EQUIPMENT PORTAPAK KIT BRAZING EQUIPMENT PORTAPAK KIT Portapak Trolley Single Stage 2 Gauge Acetylene Regulator Single Stage 2 Gauge Oxygen Regulator Acetylene Flashback Arrestor Oxygen Flashback Arrestor 5 Meter Oxy / Acetylene

More information

NEW Edge Series Products: OUTFITS and REGULATORS

NEW Edge Series Products: OUTFITS and REGULATORS NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com

More information

MINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH

MINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH MINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH The MINITHERM torch range has been developed to meet the need of trade and industry for a small injector torch to handle special jobs. A large number

More information

BRAZING & CUTTING. Kits Easy To Use

BRAZING & CUTTING. Kits Easy To Use BRAZING & CUTTING Kits Easy To Use Easy to use kits fully or partly (equipped with quick connections) assembled kits for brazing (kits no. 1 and no. 2) or cutting (kits no. 3 and no. 4). HIGH QUALITY PRODUCED

More information

Safe Work Instructions For Oxygen Acetylene Equipment

Safe Work Instructions For Oxygen Acetylene Equipment Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018

More information

OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT

OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT Introduction: The oxy-acetylene torch can be used for various tasks. It can be used for cutting steel, welding steel, brazing and for heating metal. The oxy-acetylene

More information

Chiyoda's High-Pressure Gas Control System and Equipment

Chiyoda's High-Pressure Gas Control System and Equipment Chiyoda's High-Pressure Gas Control System and Equipment 2012 CHIYODA HELPS YOUR GAS RELATED JOBS... Since the establishment 1946, we started as a manufacturer of Gas Welding & Cutting Equipment. Nowadays

More information

A guide to Part 10 of the

A guide to Part 10 of the OCCUPATIONAL HEALTH AND SAFETY DIVISION Welding, Cutting, Burning and Soldering A guide to Part 10 of the Occupational Safety General Regulations October 2007 A GUIDE TO PART 10 WELDING, CUTTING, BURNING

More information

Wilkins Safety Group

Wilkins Safety Group Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes

More information

INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches.

INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches. THE HARRIS PRODUCTS GROUP INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches. IMPORTANT: For your own safety read these instructions. Failure to do so can lead to serious injury. www.harrisproductsgroup.com.au

More information

TRADE OF HEAVY VEHICLE MECHANIC

TRADE OF HEAVY VEHICLE MECHANIC TRADE OF HEAVY VEHICLE MECHANIC PHASE 2 Module 1 Induction/Customer Care/Bench Fitting/Welding UNIT: 5 Table of Contents Aims and Objectives... 1 Learning Outcome:... 1 Setting up an Oxyacetylene torch...

More information

Installation Instructions for NP100 Series Nitrogen Control Panels

Installation Instructions for NP100 Series Nitrogen Control Panels Installation Instructions for NP100 Series Nitrogen Control Panels Installation of the Nitrogen Control Panel involves installing the rough-in box and making the necessary piping connections in accordance

More information

X11 Overview 1. Product Catalogue. Gas Welding, Cutting, Soldering and Heating.

X11 Overview 1. Product Catalogue. Gas Welding, Cutting, Soldering and Heating. X11 Overview 1 Product Catalogue. Gas Welding, Cutting, Soldering and Heating. 2 X11 Overview Contents. Content 03 Capture 1. Introduction. 05 How to Order 06 X11 Overview 08 X21 Overview 10 MIG/MAG and

More information

BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England

BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England www.bcga.co.uk TECHNICAL INFORMATION SHEET 29 OXY-FUEL GAS EQUIPMENT

More information

GENERAL CATALOGUE 2O16

GENERAL CATALOGUE 2O16 GENERAL CATALOGUE 2O16 LABORATORY TAPS INDEX TECHNICAL INFORMATION PAGES DRY SERVICE CONTROLS PAGES PRESENTATION TECHNICAL INFORMATION DESIGN AND MANUFACTURING 1 2-3 4 BENCH MOUNTED WALL MOUNTED PENDANT

More information

OXYGEN - ACETYLENE Cutting - Welding - Heating and Brazing Kit

OXYGEN - ACETYLENE Cutting - Welding - Heating and Brazing Kit GAS EQUIPMENT INDUSTRIAL CUTTING & WELDING SETS REGULATORS CUTTING EQUIPMENT WELDING - BRAZING - HEATING GAS CUTTING MACHINES AIR - PROPANE HEATING EQUIPMENT TORNADO REGULATORS HIGH PRESSURE REGULATORS

More information

flashback arrestors Regulator end

flashback arrestors Regulator end flashback arrestors Regulator end Regulator end flashback arrestors are safety devices fitted to the outlet of a regulator. They incorporate a number of features designed to protect upstream equipment

More information

TRAINING TASK 1- for regional heat skill competition

TRAINING TASK 1- for regional heat skill competition TRAINING TASK 1- for regional heat skill competition General Information Standards Complete the task within 2 hrs. The standard of work required to gain maximum marks are: it yourself or ask a fellow student

More information

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 Cal/OSHA Gas Systems for Welding GAS WELDING Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 When performing gas welding, the following precautions, work procedures,

More information

Cutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA

Cutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA Smith Equipment American Classic Heavy Duty, Welding & Outfits Cuts up to 8"- Welds up to /2" These premium heavy duty outfits feature Smith s proven in-tip gas mixing technology and include torch mount

More information

Description. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive

Description. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive Description Oxyacetylene or fusion welding is one of the oldest methods of joining metal. Oxyacetylene welding equipment is very common in an automotive shop and has many uses. It is most often used to

More information

Oxy-Fuel Safety Training. Participant s Guide

Oxy-Fuel Safety Training. Participant s Guide Oxy-Fuel Safety Training Page 1 of 19 Contents What s Included?... 3 Oxy-Fuel Safety Training Objectives... 4 Chapter 1: Safety & Responsibility... 6 Chapter 2: Gases in the Work Area... 7 Chapter 3: Equipment

More information

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the

More information

EXOTHERMIC TORCH ADAPTER. Instruction Manual

EXOTHERMIC TORCH ADAPTER. Instruction Manual EXOTHERMIC TORCH ADAPTER Instruction Manual CAUTION FLAME TECH ALWAYS RECOMMENDS USING FLASH BACK ARRESTORS (must purchase separately) Pre-operation Checklist Before you begin, the following routine checks

More information

SUPER-PARFLAM Safety ISO 5175 heavy class (1) and EN Connection profiles ISO 7289 and EN 561

SUPER-PARFLAM Safety ISO 5175 heavy class (1) and EN Connection profiles ISO 7289 and EN 561 SUPER-PARFLAM Safety ISO 5175 heavy class (1) and EN 730-1 Connection profiles ISO 7289 and EN 561 For oxy-fuel systems ISO connection profiles 1 Mono or duo: total safety... 2 1 - Protecting installations

More information

Geräte zum Schweißen, Schneiden und Erhitzen

Geräte zum Schweißen, Schneiden und Erhitzen Geräte zum Schweißen, Schneiden und Erhitzen 3 Zylinderdruckregler - 451 451-type cylinder pressure regulator Cylinder pressure regulator with two pressure gauges used on cylinder outlets to reduce the

More information

Hose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule

Hose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule Hose Fittings Little Torch Hose Nuts Type Nut Thread & Number Hose ID Size 16173 Oxygen 9/16 in-18 RH 1/8 in (3 mm) 16174 Fuel Gas 9/16 in-18 LH 1/8 in (3 mm) 16174 1882 Little Torch Hose Tailpiece Type

More information

Series MG Mixing Tubes

Series MG Mixing Tubes Series MG Mixing Tubes Fuel gas / air mixers 30-60.8-1 Air/fuel gas mixing devices for use with all MAXON premix burner systems to provide thorough blending of air/gas mixture. Mixing tubes available for

More information

Working Environment Safety Assessment

Working Environment Safety Assessment For your own safety and/or safety of your workforce, and to improve the efficiency of your business practices, you should be aware of, and be up to date with, the key safety issues and good practices relevant

More information

proline manifolds and outlets

proline manifolds and outlets proline manifolds and outlets central gas supply for industrial gases Edition 1/2015 GCE worldwide www.gcegroup.com the GCE Business GCE has almost 100 years of experience in the manufacture and supply

More information

oxyacetylene welding/cutting torch set

oxyacetylene welding/cutting torch set instructions for oxyacetylene welding/cutting torch set model no: SGA2.V2 & SGA6.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

More information

Mastar Outfits KL550-TR KL550-4P-T

Mastar Outfits KL550-TR KL550-4P-T Ranked #1 for Commercial Refrigeration Technicians Mastar Highly rated by commercial refrigeration technicians, Mastar outfits contain all the necessary top of the line components for welding, cutting

More information

CUTTING AND WELDING TORCHES HANDLES

CUTTING AND WELDING TORCHES HANDLES INSTRUCTIONS MANUAL GALA SOL, S.A. FABRICA DE APARATOS Y MAQUINAS DE SOLDADURA Y CORTE AUTOGENOS C/ ALBARRACIN 25-27 TFNO.: 976 513 055 FAX: 976 515 303 50015 ZARAGOZA e-mail: galasol@galasol.com GALA

More information

fig.1 Instructions for: Gas welding/cutting kit

fig.1 Instructions for: Gas welding/cutting kit Instructions for: Gas welding/cutting kit MOdel No: SGA1.v3 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly

More information

HERZ-Motorised flow controler

HERZ-Motorised flow controler HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48

More information

HVAC-R QUALITY GAS EQUIPMENT.

HVAC-R QUALITY GAS EQUIPMENT. HVAC-R QUALITY GAS EQUIPMENT www.tesuco.com.au WE THANK YOU FOR CHOOSING OUR QUALITY GAS EQUIPMENT For many years, Tesuco has supplied, introduced or developed gas related products for the HVAC-R industry.

More information

Connection solutions for the gas industry Date: 04/2013

Connection solutions for the gas industry Date: 04/2013 Catalogue 20 WEH Connectors Pressure-tight connections in seconds for gaseous applications Connection solutions for the gas industry Date: 04/2013 WEH - We Engineer Hightech All rights reserved, WEH GmbH

More information

Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant

Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision

More information

DISPOSABLE GAS EQUIPMENT

DISPOSABLE GAS EQUIPMENT REGULATORS AND ACCESSORIES The disposable cylinders have different valving requirements to those cylinders that are designed to be refilled. As a result, there are dedicated regulators and other accessories

More information

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES LAB TABLE OF CONTENTS Content Page Table of Content 2 BROEN-LAB

More information

UNDER A SPECIFIC HEAT PROCESS, two pieces of material

UNDER A SPECIFIC HEAT PROCESS, two pieces of material Applying Fuel Gas Welding (FGW) Processes and Techniques UNDER A SPECIFIC HEAT PROCESS, two pieces of material can be fused or joined together. This is the principal function of ing. Metal is commonly

More information

CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS. October 2007

CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS. October 2007 CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS October 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE SECTION PURPOSE

More information

V-24 OXYGEN LANCE VALVE

V-24 OXYGEN LANCE VALVE INSTRUCTIONS for F-4737-U May, 2009 V-24 OXYGEN LANCE VALVE w/ C -Size Inlet w/ B -Size Inlet V-24 Oxygen Lance with 1/8" Pipe Holder... 9728D65... 2218939 V-24 Oxygen Lance with 1/4" Pipe Holder... 9728A65...

More information

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL ATD-8402 90LB PRESSURE BLASTER INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS FOR SANDBLASTER 1. Before opening the tank release the air pressure on the sand tank. To do this, turn off

More information

Risk Management Department. Compressed Gas Safety

Risk Management Department. Compressed Gas Safety Risk Management Department Compressed 1 Introduction Many maintenance and vocational education operations require the use of compressed gases. 2 Introduction In this presentation we will discuss: Hazards

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases

OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases TRAINING SOURCE: Safety Division, Central Welding Supply, www.centralwelding.com Oxygen & Acetylene Safety Topics covered Oxygen:

More information

BEST BUY. Cutting and Welding Torches GAS RANGE. UK Sales Export Sales

BEST BUY. Cutting and Welding Torches GAS RANGE.  UK Sales Export Sales 290 RANGE Cutting and Welding Torches BEST BUY Features Cuts to 10" (250mm) Solid brass and stainless steel construction Nozzle mix design for maximum safety Backfire resistant design Easy gri control

More information

IRwin Methane Leak Detector. Innovation makes the difference

IRwin Methane Leak Detector. Innovation makes the difference IRwin Methane Leak Detector Innovation makes the difference Innovative methane detector system for easy survey of gas pipelines IRwin is a portable methane leak detector for fast and easy survey of gas

More information

PRESSURE REDUCING STATION INSTALLATION, OPERATIONS & MAINTENANCE MANUAL

PRESSURE REDUCING STATION INSTALLATION, OPERATIONS & MAINTENANCE MANUAL PRESSURE REDUCING STATION INSTALLATION, OPERATIONS & MAINTENANCE MANUAL Company Registered Office: Crown House, Stockport, Cheshire, SK13RB No. 850 0700 67 Registered in England and Wales No. 05058855

More information

GasBloc Multifunctional gas control Combined regulator and safety shut-off valves single-stage atmospheric operating mode GB-(LEP) 057 D01

GasBloc Multifunctional gas control Combined regulator and safety shut-off valves single-stage atmospheric operating mode GB-(LEP) 057 D01 Gasloc Multifunctional gas control Combined regulator and safety shut-off valves single-stage atmospheric operating mode G-(LEP) 057 D01 3.10 Printed in Germany Edition 05.11 Nr. 249 584 1 6 Technical

More information

Old documentation - Only for your information! Product is not available any more!

Old documentation - Only for your information! Product is not available any more! Gasloc Multifunctional gas control Combined regulator and safety shut-off valves single-stage atmospheric operating mode G-(LEP) 057 D01 3.10 Technical description Multifunctional gas control valve as

More information

MODULE 3 THE BRAZING PROCESS

MODULE 3 THE BRAZING PROCESS MODULE 3 THE BRAZING PROCESS ISSUED BY REVISION NUMBER REVISION DATE DOCUMENT NUMBER S. GINBEY 0 5 th May 2014 QP74 Module 3 The Brazing Process Preparation of joints and materials The removal of all oxides

More information

Welding, Cutting, and Brazing

Welding, Cutting, and Brazing Welding, Cutting, and Brazing Hazards of Welding Operations Fire hazards Metal splatter Electric shock Explosion hazards Released gases Radiant energy Where would these hazards be found on oil and gas

More information

HD 9/18-4 ST. Adaptation according to requirements thanks to retrofitting capability. Individual configurability saves investment costs

HD 9/18-4 ST. Adaptation according to requirements thanks to retrofitting capability. Individual configurability saves investment costs The space-saving stationary high-pressure cleaners from Kärcher with up to 6 supply points can be individually configured according to requirements and impress with low wear and tear. 1 2 3 4 1 2 Adaptation

More information

MEDICAL GAS OUTLETS & PROBES

MEDICAL GAS OUTLETS & PROBES MEDICAL GAS OUTLETS & PROBES Quick-connect medical gas outlets for operative connection of the medical equipment to medical gas supply systems TECHNICAL DATA Maximum inlet pressure to 10 bar Vacuum rarefaction

More information

Bauman Machine Inc. COMPRESSED GAS CYLINDER SAFETY

Bauman Machine Inc. COMPRESSED GAS CYLINDER SAFETY Bauman Machine Inc. COMPRESSED GAS CYLINDER SAFETY Many industrial and laboratory operations require the use of compressed gases for a variety of different operations. Compressed gases present a unique

More information

INSTRUCTION MANUAL. Models: OX2550KC WK5500OX DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS

INSTRUCTION MANUAL. Models: OX2550KC WK5500OX DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS DANGER INSTRUCTION MANUAL OXY-MAP Torches Models: OX2550KC WK5500OX EXTREMELY FLAMMABLE GASES USED WITH TORCH FIRE/EXPLOSION HAZARD CARBON MONOXIDE HAZARD This Oxygen Cutting and Welding Torch is unlike

More information

GasBloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating GB-M(P) 055 D01

GasBloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating GB-M(P) 055 D01 Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating G-M(P) 055 D01 Two stage operating mode G-(LEP)Z 055 D01 3.0 Printed in Germany Edition 05.11 Nr.

More information

Old documentation - Only for your information! Product is not available any more!

Old documentation - Only for your information! Product is not available any more! Gasloc Multifunctional gas control Combined regulator and safety shut-off valves Electrically modulating G-M(P) 055 D01 Two stage operating mode G-(LEP)Z 055 D01 3.0 Printed in Germany Edition 05.11 Nr.

More information

MillerWelds.com A-Miller ( )

MillerWelds.com A-Miller ( ) As the leader in welding and cutting technology, Miller has always made it a top priority to provide the very best solutions to the industry no matter how challenging the application. With that very principle

More information

Gas Apparatus

Gas Apparatus Gas Apparatus www.airliquide.ca -800-87-7697 Gas Apparatus Put safety first in gas welding and cutting applications Important Product Safety Recommendations Before use, safely secure cylinders to a wall

More information

OXY Integral. INTERCON ENTERPRISES INC Tel: Fax: Internet:

OXY Integral. INTERCON ENTERPRISES INC Tel: Fax: Internet: OXY Integral INTERCON ENTERPRISES INC Tel: 800 665 6655 Fax: 604 946 5340 E-Mail: sales@intercononline.com Internet: www.intercononline.com Manual Integral 2006 1 INDEX 2-3 PREFACE 4 INTRODUCTION 5 Principle

More information

CUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment

CUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment CUTTING TORCH SAFETY The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment Introduction Safe operation for the use of gas cutting, heating and welding requires a clear understanding

More information

Universal grips. Flaming slabs

Universal grips. Flaming slabs Devices for flaming 3 Universal grips - LEM LEM/S grip The LEM/S universal grip is compatible with HB, MPS, MPT, SECUR/2000 and RF/2000 lances. LEM/S grip M0007 LENGTH WEIGHT M0007 245 mm 0,5 kg Flaming

More information

HIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY)

HIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY) HIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY) INDUSTRIAL GAS EQUIPMENT AND WELDING SOLUTIONS ABOUT US To Our Valued Customers, CHOICE Something we will all like to have but do not always get!

More information

Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified

Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze

More information

Process gas requirements (Core, VWI, and OptiMix gas connect consoles)

Process gas requirements (Core, VWI, and OptiMix gas connect consoles) Process gas requirements (Core, VWI, and OptiMix gas connect consoles) You must supply the process gases and supply gas plumbing for your cutting system. See Table 7 on page 46 for supply gas quality,

More information

Pressure regulators for a wide range of applications

Pressure regulators for a wide range of applications Pressure regulators Pressure regulators for a wide range of applications Pressure regulators are used to reduce a gas from a higher input pressure (p1) to a lower output pressure (p2). They are used everywhere

More information

What is Oxy-Fuel Welding?

What is Oxy-Fuel Welding? Oxy-Fuel Welding What is Oxy-Fuel Welding? Process the fuses metal together Does not require electricity Uses a torch and filler rod Similar equipment as Oxy-Fuel Cutting Where is Oxy-Fuel Welding used?

More information

BY GREGGERSEN CATA LOG

BY GREGGERSEN CATA LOG MEDICAL DEVICES BY GREGGERSEN CATA LOG COMBINATION UNITS t h e r e i s n o s u b s t i t u t e CATALOG COMBINATION UNITS Hawk variants AND THEIR AREAS OF APPLICATION The HAWK PORTABLE EMERGENCY TREATMENT

More information

SAFETY AND OPERATION MANUAL

SAFETY AND OPERATION MANUAL SAFETY AND OPERATION MANUAL Congratulations on purchasing the GASPONY 1 Portable Welding/Cutting Outfit! This manual is designed to help you get the most out of your GASPONY 1. CAREFULLY REVIEW ALL SAFETY

More information

Flow and Energy Measurement F-5400 THERMAL MASS FLOW METER

Flow and Energy Measurement F-5400 THERMAL MASS FLOW METER THERMAL MASS FLOW METER s Series Thermal Mass Flow Meters provide accurate and reliable flow measurement for natural gas, compressed air, and other industrial gas applications. Natural Gas Compressed Air

More information

TURBO SET 1000 E D $'9 5(9

TURBO SET 1000 E D $'9 5(9 TURBO SET 1000 Instructions for use and maintenance HOW TO GAS WELD WITH TURBO SET 1000 With gas welding always work methodically : before starting a weld ensure that the parent metal in the weld area

More information

4 Machine maintenance and repair

4 Machine maintenance and repair 3.3 lift device consists of: lift motor, lead screw, guide rod, lifting seat Lift motor Lead screw Guide rod Lifting seat Diagram 3.3 3.4 torch holder set The torch holder consist of holder connection,

More information

Instructions for Use. Plug connection for medical gas and vacuum acc. to DIN / 2004 DIN EN ISO

Instructions for Use. Plug connection for medical gas and vacuum acc. to DIN / 2004 DIN EN ISO Instructions for Use Plug connection for medical gas and vacuum acc. to DIN 13260-2 / 2004 DIN EN ISO 9170-1 Table of Contents Page 1. MANUFACTURER S DATA... 3 2. INTRODUCTION... 4 3. APPLICATION... 5

More information

Diving Standards. Health & Safety Authority March 2017

Diving Standards. Health & Safety Authority March 2017 2017 Diving Standards Health & Safety Authority March 2017 This information is provided for reference only. As standards are under regular review, readers can validate the status of Irish standards on

More information

BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB

BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM BROEN-LAB UNIFLEX TM FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM PREMIUM LAB BROEN-LAB UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN-LAB-LAB UniFlex TM 4-5 Fittings for Non-burnig 2.0 Gases/Vacuum

More information

OWNER S MANUAL. Page: 1 of 8

OWNER S MANUAL. Page: 1 of 8 Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

Pressure Regulators. Instructions for Use

Pressure Regulators. Instructions for Use Pressure Regulators Instructions for Use 702-0032.11 May 2014 1. Symbols Warning! Caution! Indicates a potentially hazardous situation which, if not avoided, could result in personal injury to the user

More information

CODE OF PRACTICE 47 THE SAFE USE OF INDIVIDUAL PORTABLE OR MOBILE CYLINDER GAS SUPPLY EQUIPMENT

CODE OF PRACTICE 47 THE SAFE USE OF INDIVIDUAL PORTABLE OR MOBILE CYLINDER GAS SUPPLY EQUIPMENT CODE OF PRACTICE 47 THE SAFE USE OF INDIVIDUAL PORTABLE OR MOBILE CYLINDER GAS SUPPLY EQUIPMENT 2018 CODE OF PRACTICE 47 THE SAFE USE OF INDIVIDUAL PORTABLE OR MOBILE CYLINDER GAS SUPPLY EQUIPMENT 2018

More information

REGULATORS AND FLOWMETERS

REGULATORS AND FLOWMETERS REGULATORS AND FLOWMETERS SINGLE STAGE RC RANGE BROMSI Gas cylinders are available in many different shapes and sizes, with different valve connections - either vertical or horizontal. To suit this, Tesuco's

More information

For use with select HPC Fire Pits ONLY- refer to product catalog or website. 100K BTU Maximum WARNING: FOR OUTDOOR USE ONLY

For use with select HPC Fire Pits ONLY- refer to product catalog or website. 100K BTU Maximum WARNING: FOR OUTDOOR USE ONLY For use with select HPC Fire Pits ONLY- refer to product catalog or website. 100K BTU Maximum : FOR OUTDOOR USE ONLY Small Tank LP Kit (STLPK) Installation & Operation Instructions Installation We suggest

More information

CHAPTER 26 WELDING AND CUTTING

CHAPTER 26 WELDING AND CUTTING CHAPTER 26 WELDING AND CUTTING Revised 7/2010 1 WELDING AND CUTTING Responsibilities 1. The County Safety Officer is responsible for providing appropriate safety instructions for supervisor's use on welding

More information

Purge Star & Ring Purge Systems

Purge Star & Ring Purge Systems March 2013 Operator s Manual Purge Star & Ring Purge Systems Additional instruction for Purge Star Single Hose, Purge Star Double (bypass) Hose and Ring Purge with bypass hose and gas dump valve feature.

More information