12V AIR STATION ALL-IN-ONE

Transcription

1 [ACT 027] Manual E 6/9/05 10:18 PM Page 3 Multi use 12V AIR STATION ALL-IN-ONE OWNER S MANUAL MODEL NO: C71A-54 KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, READ THE MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE.

2 [ACT 027] Manual E 6/9/05 10:18 PM Page 4 Multi use 12V AIR STATION ALL-IN-ONE HIGH-PRESSURE APPLICATIONS Car tires Bicycle tires Basketball Sporting equipment Party balloons HIGH-VOLUME APPLICATIONS Air mattresses Rafts Inflatable toys Pool toys 1

3 [ACT 027] Manual E 6/9/05 10:18 PM Page 5 12V AIR STATION C1 C2 B1 B2 A1 A2 A3 B3 B4 A7 A6 A5 A4 B5 B6 B7 B8 A9 A8 B9 A1. High-pressure air compressor on/off switch A2. Built-in digital tire gauge with preset auto-stop function A3. Storage compartment A4. 12V car cigarette lighter adapter (3.4 m cable) A5. Pressure hose A6. Thread connector A7. Deflation valve A8. Ball adapter A9. Balloon adapter B1. High-volume air inflator on/off switch B2. Adapter storage B3. Inflation outlet B4. Deflation outlet B5. Large adapter B6. Medium adapter B7. Small adapter B8. Inflatable connector B9. Extension hose C1. Built-in LED light C2. Light switch 2

4 [ACT 027] Manual E 6/9/05 10:18 PM Page 6 INFLATION INSTRUCTION HIGH-PRESSURE AIR COMPRESSOR The Air Compressor has been specially designed for simple and fast inflation of car tires, bicycle tires, basketball, sporting equipment, and party balloons. The air compressor provides a small quantity of air at a relatively high pressure. INFLATING A CAR TIRE AND BICYCLE TIRE 1. With power switch in O (off) position, roll out the 12V cord from storage compartment, and connect the 12V car cigarette lighter adapter to the cigarette lighter socket in your car. 2. To choose desired pressure format PSI, BAR, KPA, press the M button. Each press of the M button cycles through the pressure format. 3. Press + or - for 3 seconds to check pre-set level. Adjust to desired level by pressing + or -. Once pre-set pressure is set, wait a few seconds for display to change back to zero. 4. Screw the thread connector onto tire s valve stem. When connected correctly the gauge will display the current pressure in the tire. 5. Turn the I/O switch to the I position. Your compressor will now inflate your tire to the pre-set pressure level, and will shut off automatically. 6. Remove the thread connector from the tire. 7. Disconnect the 12V car cigarette lighter adapter from the cigarette lighter socket and store the 12V cord into the compartment area. Note:To avoid over-inflation of tires, please check the recommended car tire pressure in the vehicle s owner s manual. For bicycle tire, please check the tire marking. INFLATING SPORTING EQUIPMENT (I.E. BASKETBALL) OR PARTY BALLOONS 1. With power switch in O (off) position, roll out the 12V cord from storage compartment, and connect the 12V car cigarette lighter adapter to the cigarette lighter socket in your car. 2. Screw the ball/balloon adapter into the thread connector. 3. Insert the ball/balloon adapter into valve of the object to be inflated. 3

5 [ACT 027] Manual E 6/9/05 10:18 PM Page 7 INFLATION INSTRUCTION 4. Turn the I/O switch to the I position. Operate the air compressor until the desired firmness is reached, or the object is fully inflated. 5. Pull ball/balloon adapter from the inflated object s valve and unscrew ball/balloon adapter from the thread connector. 6. Disconnect the 12V car cigarette lighter adapter from the cigarette lighter socket and store the 12V cord into the compartment area. Note: If a pressure reading is required during inflation, the built-in pressure gauge will provide an estimated reading only. CAUTION Do not run the air compressor continuously for more than 20 minutes. After each 20 minutes, allow it to cool for a minimum of 20 minutes. Do not leave the air compressor unattended while in operation. Keep out of reach of children. Do not exceed maximum pressure of 120 psi. The built-in pressure gauge will provide an estimated reading only. Please use a digital pressure gauge for more accuracy pressure information. 4

6 [ACT 027] Manual E 6/9/05 10:18 PM Page 8 INFLATION INSTRUCTION HIGH-VOLUME AIR INFLATOR The Air Inflator is designed for quick and easy inflation and deflation of high air volume objects such as air mattresses, rafts, inflatable toys and pool toys. BEFORE INFLATING Choose the appropriate inflatable adapter. There are four inflatable adapters and an extension hose provided for high-volume inflation/deflation. The small and medium adapters must be used with the inflatable connector provided. The inflatable connector and large adapter can be directly attached to the inflation air outlet. INFLATING PROCEDURE 1. With power switch in O (off) position, roll out the 12V cord from storage compartment, and connect the 12V car cigarette lighter adapter to the cigarette lighter socket in your car. 2. Insert the appropriate inflatable adapter into inflation outlet. 3. Insert adapter into the air valve of the object to be inflated. 4. Turn the I/O switch to the I position. Operate the air inflator until the desired firmness is reached. 5. Remove adapter from the inflated object valve and close the valve cap. 6. Disconnect the 12V car cigarette lighter adapter from the cigarette lighter socket and store the 12V cord into the compartment area. DEFLATING PROCEDURE 1. With power switch in O (off) position, roll out the 12V cord from storage compartment, and connect the 12V car cigarette lighter adapter to the cigarette lighter socket in your car. 2. Insert the inflatable adapter into deflation outlet. 3. Insert adapter into the valve of the object to be deflated. 4. Turn the I/O switch to the I position. Operate the air inflator until desired deflation is reached. 5. Remove adapter from the deflated object valve. 6. Disconnect the 12V car cigarette lighter adapter from the cigarette lighter socket and store the 12V cord into the compartment area. 5

7 [ACT 027] Manual E 6/9/05 10:18 PM Page 9 INFLATION INSTRUCTION INFLATION TIPS FOR LARGE OBJECTS The performance of an air inflator depends on air flow rate, size of adapter and the valve of the inflatable object. The smaller the valve and/or adapter used, the lower the air flow rate. Therefore, always buy inflatable objects with the largest possible valves. Typically, air mattresses or large inflatable objects may have two sizes of air valve, always inflate from the largest valve to get maximum performance. CAUTION Do not run the air inflator for continuously for more than 20 minutes. After each 20 minutes, allow it to cool for a minimum of 20 minutes. Do not leave the air inflator unattended while in operation. Keep out of reach of children. Make sure the stop valve or resisted valve is opened, before inflation or deflation. 6

8 [ACT 027] Manual E 6/9/05 10:18 PM Page 10 GENERAL SAFETY MEASURES GENERAL SAFETY MEASURES AND PRECAUTIONS THAT APPLY TO THE USE OF AIR COMPRESSOR/INFLATOR. The following instructions apply to both the air compressor and air inflator. Safe operation of the air compressor and inflator require that you read the instructions and safety precautions carefully and follow all instructions before using the air compressor or inflator. 1. The air compressor and inflator are designed for occasional use. Inflation over a long period will overheat the air compressor or air inflator and may cause damage. 2. The air compressor and inflator must not operate for more than 20 minutes at a time, after which it must be switched off and set aside to cool for at least 20 minutes before restarting. 3. If the air compressor or inflator emits abnormal sounds or overheats, turn it off immediately and let it cool off for minimum 40 minutes. 4. Inspect air compressor, inflator and batteries before use. If cracked, broken or damaged parts are found, qualified technicians should repair damaged parts. 5. Incorrect use of air compressor/ inflator may result in personal injury and/or property damage. 6. Never expose the air compressor, inflator to rain, frost or temperatures above 50 ºC (122 ºF). 7. Never use the air compressor or inflator near flammable fluids or gases. Make sure your working area is well-lit. 8. Protect yourself against electric shock. Avoid physical contact with grounded surfaces such as pipes, radiators, electric stoves, refrigerators, etc. 9. Never allow children to connect/ disconnect the air compressor or inflator to/from power sources. Never leave children unattended with the air compressor or inflator and never allow them to play with the accessories. 10. Never allow anyone to pump air into mouth, ears, nose, etc of people, or animals. The air compressor/inflator is not a toy. 7

9 [ACT 027] Manual E 6/9/05 10:18 PM Page 11 GENERAL SAFETY MEASURES 11. Store air compressor and inflator in a secure location. If the air compressor/inflator for long periods of time, it should be stored in a dry space inaccessible to children. 12. Make sure the cord is not exposed to hot objects, oil or sharp edges. 13. Keep the air compressor and inflator clean to maintain maximum output and safety. Examine the plug and cable pack at regular intervals and have them repaired by qualified technicians if they are damaged. 14. Unplug the 12V car cigarette lighter adapter from the cigarette lighter socket in your car when is not in use. 15. Warning! For your own safety, you should only use accessories and parts specified in the instructions, or recommended for use by the manufacturer. Use of accessories and other parts that are not mentioned in the instructions may entail an increased risk for the user of the air compressor and inflator. 8

10 [ACT 027] Manual E 6/9/05 10:18 PM Page 12 WARRANTY This Active Products equipment carries a one-year limited warranty against defects in manufacturing workmanship. This Limited Warranty shall be limited to the repair or replacement of parts which prove defective under normal use and service and which on examination shall indicate, to Active Product s satisfaction, they are defective. Active Products reserves the right to request the return of defective parts. Shipping charges may apply. Before returning any parts, contact the toll-free hotline AIRMAN ( ). If Active Products confirms the defect and approves the claim, Active Products will elect to replace such parts without charge. The foregoing warranty does not apply to defects resulting from faulty installation, operation, disassembly, alterations or remodeling, or misuse, misapplication, neglect, abuse, accident, tornado, hurricane, and earthquake; or lack of proper maintenance, cleaning and care. Warranty will not apply if this product is used for commercial or rental purposes. This warranty shall not extend to anyone other than the original purchaser of this product. Should this product become defective within the stated warranty period, do not return to store, but call AIRMAN ( ). Have the sales receipt handy. 9

11 [ACT 027] Manual E 6/9/05 10:18 PM Page

12 [ACT 027] Manual E 6/9/05 10:18 PM Page 14 Imported by: Active Products Inc. Toronto, Ontario, Canada M3B 2M3 Toll free: AIRMAN ( ) Made in China