MATERIAL SAFETY DATA SHEET (CLEAR NON-HEAT SEALABLE FILM)

Transcription

1 (CLEAR NON-HEAT SEALABLE FILM) SECTION I Issue Date: April, 2014 Product Name: BTP Amtopp, A Member of the Inteplast Group, LTD. 101 Inteplast Blvd./Highway 1593 Lolita, TX Emergency Phone Numbers: Inteplast Headquarters Amtopp Production Plant Product Information: Trade Names and Synonyms: Formulas: Chemical Family: Livingston, New Jersey x8044 Lolita, Texas BTP, slip film, food grade packaging film Proprietary Formulation Polyolefin Compound CAS Registry No: SECTION II Hazardous Ingredient This material safety data sheet has been prepared in compliance with the Federal OSHA Hazard Communication Standard 29 CFR This product does not contain ingredients which would be considered to be a hazardous chemical under that standard. InteTopp BTP as sold is considered to be a non-respirable solid. Page 1 of 5

2 SECTION III Health Hazard Inhalation: Considered a non-respirable solid. No significant irritation expected other than possible mechanical irritation. If adverse effect occurs, remove person(s) to uncontaminated area. Get medical attention. Eye: No significant irritation expected other than possible mechanical irritation. Flush eyes with plenty of water. Skin: No significant irritation expected other than possible mechanical irritation. Wash exposed skin with soap and water. None required. However, use of protective gloves/clothing is good industrial practice. Chronic Effects: None known. Page 2 of 5

3 SECTION IV Occupational Exposure Limits PEL (OSHA Permissible Exposure Limits): No OSHA PEL has been established for this particular product. TLV (ACGIH Threshold Limit Value): No ACSIN TLV has been established for this particular product. SECTION V Ingestion: Skin Contact: Eye Contact: Inhalation: Emergency First Aid Procedures SECTION VI Physical Data Boiling Point: Not Applicable Melting Point: ºF ºC Vapor Pressure: Not Applicable Water Solubility: Insoluble Specific Gravity: Water = Product Appearance: Natural, Colorless Product Odor: Odorless SECTION VII Fire and Explosion Hazard Flash Point: Above 500 ºF 260 ºC Auto-Ignition Temperature: > 735 ºF > 390 ºC Page 3 of 5

4 SECTION VII (continued) Fire and Explosion Hazard Fire Fighting Procedures: Individuals should perform only those fire fighting procedures for which they are trained. Agents approved for Class A hazards (e.g. halogenated agents, foam, steam) or water fog. Unusual Fire and Explosion Hazard: None SECTION VIII Reactivity Dangerous Reactions: None Identified. Hazardous Decomposition: Thermal decomposition can produce carbon monoxide, carbon dioxide, and other harmful products. Stability: Stable unless subjected to extremely strong acids. SECTION IX Protective Clothing: Respiratory Employee Protection However, use of protective gloves/clothing is good industrial practice. Safety glasses meeting the specification of ANSI Standard 2P7.1. SECTION X Storage Requirements: Spill or leak: Waste Disposal: Environmental Protection No special requirements. Contain and remove by mechanical means. Disposal must be in accordance with applicable Federal, State or Local Regulations. Page 4 of 5

5 SECTION XI DOT Classification: Regulatory Controls Non-regulatory commodity. SECTION XII Sara Title III Statement Sara Title III Section 302: Extremely Hazardous Substance(s): None Sara Title III Section 313: This product does not contain Toxic chemicals above the Deminims levels as listed, which are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (Emergency Planning and Community Right-To-Know Act and 40 CFR part 372). This information must be included in all MSDS that are copied and distributed for this material. Do not copy this Material Safety Data Sheet in Part --- You must copy, distribute and use the entire Material Safety Data Sheet. SECTION XIII Additional Information The information presented herein is believed to be factual as it has been derived from the works and opinions of persons believed to be qualified experts; however, nothing contained in this information is to be taken as a warranty or representation for which Amtopp Corporation bears legal responsibility. The user should review any recommendations in the specific context of the intended use to determine whether they are appropriate. Page 5 of 5