Moor, Tend Mooring And Unmoor Ship - Supervisor Level -
|
|
- Darlene Curtis
- 6 years ago
- Views:
Transcription
1 Marine Terminal Operations Competency Standard Moor, Tend Mooring And Unmoor Ship - Supervisor Level - Industry : Oil, Chemical and Gas Industry Competency Category : 2.0 Moor, tend mooring and unmoor ship Competency Unit : Ensure ship is correctly positioned alongside to enable connection or disconnection of loading arms, hoses and services Ensure mooring equipment is operated safely and efficiently Ensure mooring or unmooring operations are conducted safely and efficiently Ensure integrity of mooring system during ship's time alongside Ensure ship/shore access is positioned, maintained and removed safely and efficiently Competency Descriptor : On completion of this unit, learners will have the skills and knowledge to competently perform the task of mooring, tend mooring and unmooring ship at the supervisor level. Competency Level : Level 3 (Advanced Certificate) Version Number : 1.0 Effective Date : 1 September 2011 Developer : WSH Council (Logistics & Transport) Ship / Shore Interface Sub-committee Custodian : WSH Council / MOM
2 Copyright Workplace Safety and Health Council, Ministry of Manpower, Singapore All rights reserved. This document is provided for explicit use and guidance of Training Providers as information resource for curriculum development and assessment purposes. Any other use of this document or parts thereof, including reproduction, publication, distribution, transmission, retransmission or public showing, or storage in a retrieval system in any form, electronic or otherwise, for purposes other than that expressly stated in this document without the expressed permission of MOM is strictly prohibited.
3 Summary of Competency Units and Elements Covered The full details of the Competency Units at Supervisor level are set out in the subsequent pages. These descriptors cover the Competency Elements, Performance Criteria, Range and Context, Evidence Sources and Underpinning Knowledge. Summary of Competency Units and Competency Elements Competency Units Competency Elements Supervisor 2.1 Ensure ship is correctly positioned alongside to enable connection or disconnection of loading arms, hoses and services Ensure hoses or loading arms and other connections can be made Inform master or pilot of ship's position, relative to the required position 2.2 Ensure mooring equipment is operated safely and efficiently Select the correct mooring equipment for each particular application Assess condition and operation of mooring materials and equipment Monitor use of shipboard mooring equipment 2.3 Ensure mooring or unmooring operations are conducted safely and efficiently Ensure pattern of mooring lines meets prescribed plan for the vessel and berth Ensure the correct mooring equipment is used for each particular application Ensure that the agreed mooring plan is implemented Assess condition of mooring materials during mooring operations 2.4 Ensure integrity of mooring system during ship's time Ensure routine inspections of mooring equipment are conducted Page 1 of 31
4 alongside Ensure mooring tensions are maintained within prescribed limits (where monitoring equipment is fitted) 2.5 Ensure ship/shore access is positioned, maintained and removed safely and efficiently Test shore gangway to prescribed procedures Assumed Knowledge and Skills Learners for this unit are assumed to: be able to listen, read, speak and write English at a proficiency level equivalent to the Employability Skills System (ESS) Workplace Literacy Level 7 be able to manipulate numbers at a proficiency level equivalent to Employability Skills System (ESS) Workplace Numeracy Level 7 have completed and are certified Competent for the Competency Units at Operator Level or have at least 1 year working experience in Moor, Tend Mooring And Unmoor of Ship have completed the Oil/Petrochemical Industry Safety Course for Supervisor have completed the Basic Fire Fighting Course. Page 2 of 31
5 Competency Unit 2.1 Ensure ship is correctly positioned alongside to enable connection or disconnection of loading arms, hoses and services Competency Element Ensure hoses or loading arms and other connections can be made Performance Criteria A competent person should be able to successfully perform the following: Position of ship s manifolds with respect to Terminal equipment Ensure vessel is positioned within prescribed parameters Take appropriate action if vessel moves out of prescribed parameters Range and Context Operating parameters of all connecting equipment Significance of ship dimensions such as: Vessel freeboard Bow to centre manifold Manifold arrangements Berthing Procedures Units of measurement and terminology Hazards and safety precautions associated with incorrect positioning Berthing information that needs to be transmitted to master of tanker before the tanker can be brought alongside Types of additional berthing information which should be given in the event of changing weather conditions for the various types of berths: Jetty berths Conventional, multi-buoy moorings Single Point Moorings (SPMs) All offshore berths Safety procedures to follow when managing moorings while alongside Page 3 of 31
6 Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Position ship s manifolds with respect to Terminal equipment Ensure vessel is positioned within prescribed parameters Taking appropriate action if vessel moves out of prescribed parameters Verbal and/or Written Paper Operating parameters of all connecting equipment Significance of ship dimensions such as: Vessel freeboard Bow to centre manifold Manifold arrangements Berthing Procedures Units of measurement and terminology Hazards and safety precautions associated with incorrect positioning Underpinning Knowledge A competent individual needs to know and understand: Importance of positioning ship s manifolds with respect to Terminal equipment Importance of ensuring vessel is positioned within prescribed parameters What appropriate action need to be taken if vessel moves out of prescribed parameters Hazards and safety precautions associated with incorrect positioning Page 4 of 31
7 Competency Unit 2.1 Ensure ship is correctly positioned alongside to enable connection or disconnection of loading arms, hoses and services Competency Element Inform master or pilot of ship's position, relative to the required position Performance Criteria A competent person should be able to successfully perform the following: Communicate relevant information clearly and concisely Range and Context Understand communication procedures Understand operation procedures for all communication equipment Hazards of incorrect and/or misunderstood communication Factors affecting the risk of poor communication Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Communicate relevant information clearly and concisely Verbal and/or Written Paper Understand communication procedures Understand operation procedures for all communication equipment Hazards of incorrect and/or misunderstood communication Factors affecting the risk of poor communication Page 5 of 31
8 Underpinning Knowledge A competent individual needs to know and understand: Communication procedures Correct use of all communication equipment Importance of providing relevant information clearly and concisely Implications of incorrect and/or misunderstood communication Hazards of incorrect and/or misunderstood communication Factors affecting the risk of poor communication Page 6 of 31
9 Competency Unit 2.2 Ensure mooring equipment is operated safely and efficiently Competency Element Select the correct mooring equipment for each particular application Performance Criteria A competent person should be able to successfully perform the following: Check correct equipment selected for mooring scheme Range and Context Purposes of springs and head, stern and breast lines Factors affecting restraint capacity of moorings Effects of external or environmental factors on mooring equipment and materials Hazards and safety precautions associated with mixing mooring material types and sizes when intended for the same application Purpose of an efficient mooring system Development of mooring system to resist wind, current and tidal forces on a ship Purpose and role of mooring pattern Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Check correct equipment selected for mooring scheme Verbal and/or Written Paper Purposes of springs and head, stern and breast lines Factors affecting restraint capacity of moorings Page 7 of 31
10 Effects of external or environmental factors on mooring equipment and materials Hazards and safety precautions associated with mixing mooring material types and sizes when intended for the same application Underpinning Knowledge A competent individual needs to know and understand: How to select correct equipment for a mooring scheme Purpose of an efficient mooring system Purposes of springs and head, stern and breast lines Factors affecting restraint capacity of moorings Effects of external or environmental factors on mooring equipment and lines Hazards and safety precautions associated with mixing type and size of mooring lines Page 8 of 31
11 Competency Unit 2.2 Ensure mooring equipment is operated safely and efficiently Competency Element Assess condition and operation of mooring materials and equipment Performance Criteria A competent person should be able to successfully perform the following: The condition of all materials to be used in a mooring scheme should be properly assessed at regular intervals Corrective action should be taken regarding any substandard or defective mooring materials Mooring equipment should be subjected to the correct pre use inspections prior to a ship s arrival alongside Correct action should be taken regarding any mooring equipment which is found to be unserviceable Range and Context Effects of mechanical damage, corrosion and contamination on mooring materials Effects of splicing and other attempted repairs on properties and reliability of ropes Features which indicate that mooring equipment might be unserviceable Correct actions to take whenever mooring materials or equipment are found to be unserviceable Factors affecting the risk of incorrect assessment of mooring materials and equipment Understand the guidelines for handling, inspecting and removing from service wire mooring lines Understand the recommendations and guidelines for the care, handling, inspection and replacement of fibre ropes Page 9 of 31
12 Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process The condition of all materials to be used in a mooring scheme should be properly assessed at regular intervals Corrective action should be taken regarding any substandard or defective mooring materials Mooring equipment should be subjected to the correct pre use inspections prior to a ship s arrival alongside Correct action should be taken regarding any mooring equipment which is found to be unserviceable Verbal and/or Written Paper Effects of mechanical damage, corrosion and contamination on mooring materials Effects of splicing and other attempted repairs on properties and reliability of ropes Features which indicate that mooring equipment might be unserviceable Correct actions to take whenever mooring materials or equipment are found to be unserviceable Factors affecting the risk of incorrect assessment of mooring materials and equipment Underpinning Knowledge A competent individual needs to know and understand: How to properly assess, at regular intervals, condition of all materials to be used in a mooring scheme What corrective action need to be taken regarding any substandard or defective mooring materials What corrective action need to be taken regarding any mooring equipment which is found to be unserviceable Page 10 of 31
13 Importance of regular and pre use inspections of mooring materials and equipment and how to conduct such inspection Recommended guidelines for the care, handling, inspection and removing damage and unusable mooring lines from usage Effects of mechanical damage, corrosion and contamination on mooring materials Effects of splicing and other attempted repairs on properties and reliability of ropes Page 11 of 31
14 Competency Unit 2.2 Ensure mooring equipment is operated safely and efficiently Competency Element Monitor use of shipboard mooring equipment Performance Criteria A competent person should be able to successfully perform the following: Complete pre use safety checks before each piece of equipment is used Operate the mooring equipment correctly to match the mooring scheme and materials Set moorings at the optimum tension so as to minimise the effects of external factors Know that winch forces should be held on brakes with the brake settings correct for the required holding power Know that winches should not be used in self tensioning mode Range and Context All aspects of safety checks for mooring equipment Safe methods of leading ropes onto winch drums Operating procedures and safe operating envelopes for mooring equipment Brake Holding Power (BHP) and how BHP is affected by the direction of reeve and number of turns of rope on the winch drum Forces imposed during mooring operations Requirements for mooring tensions Effects of external factors such as tide, weather, waves and passing ships Hazards and safety precautions associated with incorrect equipment operation Factors affecting the risks of incorrectly operating mooring equipment Function and type of mooring winches Difference between automatic tension winches and manual winches Page 12 of 31
15 Characteristics of winch drum, split and undivided Understand the handling of SPM pick up ropes Characteristics of the different winch drives: steam, hydraulic and electric Function and characteristics of winch brakes Understand the guidelines for testing winch brakes Test frequency Test specification Supervision of testing Testing equipment Methods of testing Principle performance particulars for different size moorings winches Understand the strength of the mooring winch structure Understand recommended winch testing guidelines for: Type testing Individual tests On board acceptance tests and inspections Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Complete pre use safety checks before each piece of equipment is used Operate the mooring equipment correctly to match the mooring scheme and materials Set moorings at the optimum tension so as to minimise the effects of external factors Know that winch forces should be held on brakes with the brake settings correct for the required holding power Know that winches should not be used in self tensioning mode Verbal and/or Written Paper Page 13 of 31
16 All aspects of safety checks for mooring equipment Safe methods of leading ropes onto winch drums Operating procedures and safe operating envelopes for mooring equipment BHP and how BHP is affected by the direction of reeve and number of turns of rope on the winch drum Forces imposed during mooring operations Requirements for mooring tensions Effects of external factors such as tide, weather, waves and passing ships Hazards and safety precautions associated with incorrect equipment operation Factors affecting the risks of incorrectly operating mooring equipment Underpinning Knowledge A competent individual needs to know and understand: Importance of regular safety checks and pre use inspections of mooring materials and equipment How to complete pre use safety checks before each piece of equipment is used Methods of operating the mooring equipment correctly to match the mooring scheme and materials Importance of setting moorings at the optimum tension so as to minimize the effects of external factors Implications of using winches in self tensioning mode Effects of external factors such as tide, weather, waves and passing ships Hazards and safety precautions associated with incorrect equipment operation Factors affecting the risks of incorrectly operating mooring equipment Page 14 of 31
17 Competency Unit 2.3 Ensure mooring or unmooring operations are conducted safely and efficiently Competency Element Ensure pattern of mooring lines meets prescribed plan for the vessel and berth Performance Criteria A competent person should be able to successfully perform the following: Ensure mooring pattern is within acceptable limits of mooring plan Take appropriate action if mooring pattern is outside acceptable plan Range and Context Full range of mooring patterns for the Terminal Principles of safe mooring, including affects of: the vertical angle the mooring line forms with the quay the horizontal angle the mooring line makes with parallel side of the ship Understanding use of springs for fore and aft restraint Limitations of each mooring pattern Hazards and safety precautions associated with not complying with specified mooring pattern Importance of elasticity of a mooring line and the factors affecting it Understand general mooring guidelines Operational considerations that must be taken into account before selecting a mooring pattern Understand the requirements for multi buoy moorings Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Ensure mooring pattern is within acceptable limits of mooring plan Page 15 of 31
18 Taking appropriate action if mooring pattern is outside acceptable plan Verbal and/or Written Paper Full range of mooring patterns for the Terminal Principles of safe mooring, including affects of: the vertical angle the mooring line forms with the quay the horizontal angle the mooring line makes with parallel side of the ship Understanding of use of springs for fore and aft restraint Limitations of each mooring pattern Hazards and safety precautions associated with not complying with specified mooring pattern Underpinning Knowledge A competent individual needs to know and understand: How to execute a mooring pattern within an acceptable limits of mooring plan What appropriate action need to be taken if mooring pattern is outside acceptable plan Principles of safe mooring, including affects of vertical or horizontal angle and length of rope Limitations of various mooring pattern Hazards and safety precautions associated with not complying with specified mooring pattern Page 16 of 31
19 Competency Unit 2.3 Ensure mooring or unmooring operations are conducted safely and efficiently Competency Element Ensure the correct mooring equipment is used for each particular application Performance Criteria A competent person should be able to successfully perform the following: Ensure that the correct equipment as prescribed in the mooring scheme is used Range and Context Procedures to be followed if problems are encountered in complying with an approved mooring scheme Hazards and safety precautions associated with the use of incorrect equipment Factors affecting the risks of incorrect equipment being used Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Ensure that the correct equipment as prescribed in the mooring scheme is used Verbal and/or Written Paper Procedures to be followed if problems are encountered in complying with an approved mooring scheme Hazards and safety precautions associated with the use of incorrect equipment Factors affecting the risks of incorrect equipment being used Underpinning Knowledge Page 17 of 31
20 A competent individual needs to know and understand: How to use the correct mooring equipment for each particular application Importance of ensuring that correct equipment as prescribed in the mooring scheme is used What procedures to be followed if problems are encountered in complying with an approved mooring scheme Hazards and safety precautions associated with the use of incorrect equipment Factors affecting the risks of incorrect equipment being used Page 18 of 31
21 Competency Unit 2.3 Ensure mooring or unmooring operations are conducted safely and efficiently Competency Element Ensure that the agreed mooring plan is implemented Performance Criteria A competent person should be able to successfully perform the following: Ensure all mooring lines handled and secured according to the Terminal s procedures Ensure sufficient lines secured for expected stay of vessel Ensure that Terminal operators use appropriate Personal Protective Equipment (PPE) Ensure all safe working practices are observed during mooring operations Range and Context Types and limitations of moorings used at Terminal The role of mooring in berthing procedures Selection and correct usage of PPE Safe working practices involving handling of mooring lines Safe mooring and unmooring procedures Hazards and safety precautions associated with mooring and unmooring Factors affecting the risks of incorrect mooring or unmooring operations Importance of tending to mooring lines Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Ensuring all mooring lines handled and secured according to the Terminal s Page 19 of 31
22 procedures Ensuring sufficient lines secured for expected stay of vessel Ensuring that Terminal operators use appropriate PPE Ensuring all safe working practices are observed during mooring operations Verbal and/or Written Paper Types and limitations of moorings used at Terminal The role of mooring in berthing procedures Selection and correct usage of PPE Safe working practices involving handling of mooring lines Safe mooring and unmooring procedures Hazards and safety precautions associated with mooring and unmooring Factors affecting the risks of incorrect mooring or unmooring operations Underpinning Knowledge A competent individual needs to know and understand: Importance of ensuring that all mooring lines handled are secured according to the Terminal s procedures Importance of ensuring that there are sufficient lines secured for expected stay of vessel Types and limitations of moorings used at Terminal The role of mooring in berthing procedures Type of PPE to be worn by Terminal operators Safe working practices during mooring operations and implication if they are not followed. Hazards and safety precautions associated with mooring and unmooring Risks of incorrect mooring or unmooring operations Page 20 of 31
23 Competency Unit 2.3 Ensure mooring or unmooring operations are conducted safely and efficiently Competency Element Assess condition of mooring materials during mooring operations Performance Criteria A competent person should be able to successfully perform the following: Ensure that all moorings used for the same purpose are of the same materials, construction and size Ensure that the strength of wires or ropes are at least equal to those specified in the prescribed mooring plan Assess the condition and appropriateness of the mooring equipment offered by the ship Take appropriate action if any of the ship s mooring materials are defective or otherwise unsuitable for the agreed mooring plan Range and Context Assessment techniques for all types of mooring material likely to be used at the Terminal Procedures for rejecting unsuitable materials offered by ships Actions to be taken if suitable materials are not available Hazards and safety precautions associated with inappropriate or defective mooring materials Factors affecting the condition and rate of deterioration of mooring materials and influencing the choices made by ships personnel Understand the guidelines for handling, inspecting and removing from service wire mooring lines Safety hazards when handling synthetic lines Characteristics of synthetic line when it is being handled and stored Page 21 of 31
24 Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Ensuring that all moorings used for the same purpose are of the same materials, construction and size Ensuring that the strength of wires or ropes are at least equal to those specified in the prescribed mooring plan Assessing the condition and appropriateness of the mooring equipment offered by the ship Taking appropriate action if any of the ship s mooring materials are defective or otherwise unsuitable for the agreed mooring plan Verbal and/or Written Paper Assessment techniques for all types of mooring material likely to be used at the Terminal Procedures for rejecting unsuitable materials offered by ships Actions to be taken if suitable materials are not available Hazards and safety precautions associated with inappropriate or defective mooring materials Factors affecting the condition and rate of deterioration of mooring materials and influencing the choices made by ships personnel Underpinning Knowledge A competent individual needs to know and understand: Importance of ensuring that all moorings used for the same purpose are of the same materials, construction and size Importance of ensuring that the strength of wires or ropes are at least equal to those specified in the prescribed mooring plan Techniques of assessing the condition and appropriateness of the mooring equipment offered by the ship What appropriate action need to be taken if any of the ship s mooring materials are defective or otherwise unsuitable for the agreed mooring plan Page 22 of 31
25 Procedures for rejecting unsuitable materials offered by ships Hazards and safety precautions associated with inappropriate or defective mooring materials Factors affecting the condition and rate of deterioration of mooring materials Page 23 of 31
26 Competency Unit 2.4 Ensure integrity of mooring system during ship's time alongside Competency Element Ensure routine inspections of mooring equipment are conducted Performance Criteria A competent person should be able to successfully perform the following: Ensure mooring inspection procedures are carried out Check mooring inspections are undertaken at prescribed intervals and as necessary during adverse environmental conditions Take appropriate action if inspections cannot be completed or if faults or defects are found Range and Context Requirements for mooring tensions Effects of factors such as tide, weather, waves, passing ships Inspection procedures for in use equipment and materials Safe operating envelopes for mooring equipment and materials BHP and how BHP is affected by the number of turns of rope on the winch drum Identification of malfunctioning or unserviceable mooring materials and equipment Terminal procedures for equipment malfunctions and having repairs carried out Hazards and safety precautions associated with material or equipment malfunctions Factors affecting the risk of malfunction of in use mooring equipment and materials Function and rules of line tending Types of damage and wear experienced by rope Cuts Page 24 of 31
27 External abrasion and fusion Internal abrasion Hockling Broken core Ultraviolet damage Chemical damage Splices Damage to Eyes Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Ensuring mooring inspection procedures are carried out Check mooring inspections are undertaken at prescribed intervals and as necessary during adverse environmental conditions Taking appropriate action if inspections cannot be completed or if faults or defects are found Verbal and/or Written Paper Requirements for mooring tensions Effects of factors such as tide, weather, waves, passing ships Inspection procedures for in use equipment and materials Safe operating envelopes for mooring equipment and materials BHP and how BHP is affected by the number of turns of rope on the winch drum Identification of malfunctioning or unserviceable mooring materials and equipment Terminal procedures for equipment malfunctions and having repairs carried out Hazards and safety precautions associated with material or equipment malfunctions Factors affecting the risk of malfunction of in use mooring equipment and Page 25 of 31
28 materials Underpinning Knowledge A competent individual needs to know and understand: Importance of ensuring that mooring inspection procedures are carried out Method of conducting a mooring inspection and what to look for How to check that mooring inspections are undertaken at prescribed intervals and as necessary during adverse environmental conditions What appropriate action need to be taken if inspections cannot be completed or if faults or defects are found Requirements for mooring tensions and effects of factors such as tide, weather, waves, passing ships Hazards and safety precautions associated with material or equipment malfunctions Factors affecting the risk of malfunction of in use mooring equipment and materials Page 26 of 31
29 Competency Unit 2.4 Ensure integrity of mooring system during ship's time alongside Competency Element Ensure mooring tensions are maintained within prescribed limits (where monitoring equipment is fitted) Performance Criteria A competent person should be able to successfully perform the following: Know that winch forces should be held on brakes with the correct brake settings for the required holding power Know that winches should not be used in self tensioning mode Check tension levels are being kept within limits Take appropriate action if tensions are outside prescribed limits Take appropriate action if weather parameters are exceeded Range and Context Tension monitoring equipment and methods Operating ranges and tolerances of mooring equipment, materials and tension monitors Permissible weather parameters for ship to remain on berth. Terminal procedures for bad weather Appearance of different ropes under slack, acceptably loaded and overloaded conditions Hazards and safety precautions associated with slack or excessively loaded ropes and mooring equipment Factors affecting the risk of mooring pattern loads deviating excessively from the designed loadings Appreciation of procedures for calculating wind force and current strength Page 27 of 31
30 Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Process Know that winch forces should be held on brakes with the correct brake settings for the required holding power Know that winches should not be used in self tensioning mode Check tension levels are being kept within limits Taking appropriate action if tensions are outside prescribed limits Taking appropriate action if weather parameters are exceeded Verbal and/or Written Paper Tension monitoring equipment and methods Operating ranges and tolerances of mooring equipment, materials and tension monitors Permissible weather parameters for ship to remain on berth. Terminal procedures for bad weather Appearance of different ropes under slack, acceptably loaded and overloaded conditions Hazards and safety precautions associated with slack or excessively loaded ropes and mooring equipment Factors affecting the risk of mooring pattern loads deviating excessively from the designed loadings Appreciation of procedures for calculating wind force and current strength Underpinning Knowledge A competent individual needs to know and understand: That winch forces should be held on brakes with the correct brake settings for the required holding power That winches should not be used in self tensioning mode Page 28 of 31
31 Importance to check that tension levels are being kept within limits What appropriate action are to be taken if tensions are outside prescribed limits What appropriate action are to be taken if weather parameters are exceeded Hazards and safety precautions associated with slack or excessively loaded ropes and mooring equipment Factors affecting the risk of mooring pattern loads deviating excessively from the designed loadings Page 29 of 31
32 Competency Unit 2.5 Ensure ship/shore access is positioned, maintained and removed safely and efficiently Competency Element Test shore gangway to prescribe procedures Performance Criteria A competent person should be able to successfully perform the following: Test the shore gangways to prescribed procedure Take appropriate action if tests indicate malfunction Ensure that all walkways are: Clean and free from contamination Free from defect Unobstructed Well illuminated Safely rigged with nets and other safety equipment as required Range and Context Safe working loads of lifting gear General arrangements and working parameters of shore access equipment Gangway test and operating procedures Contingency actions Hazards and safety precautions associated with the positioning and use of access equipment Factors affecting the risks of accidents associated with access equipment Safety measures for access between ship and shore cover the following: Gangways and other means of access Gangway landing Lighting Evidence Sources The following is a list of examples of the kinds of evidence that would provide a guide as to where an individual is meeting the standards required to become competent in this competency element: Page 30 of 31
33 Process Testing the shore gangways to prescribed procedure Taking appropriate action if tests indicate malfunction Ensuring that all walkways are: Clean and free from contamination Free from defect Unobstructed Safely rigged with nets and other safety equipment as required Well illuminated Verbal and/or Written Paper Safe working loads of lifting gear General arrangements and working parameters of shore access equipment Gangway test and operating procedures Contingency actions Hazards and safety precautions associated with the positioning and use of access equipment Factors affecting the risks of accidents associated with access equipment Underpinning Knowledge A competent individual needs to know and understand: Method on how to test the shore gangways What appropriate action are to be taken if tests indicate malfunction Hazards and safety precautions associated with the positioning and use of access equipment Factors affecting the risks of accidents associated with access equipment Page 31 of 31
CURRICULUM, TRAINING AND ASSESSMENT GUIDE Part B
CURRICULUM, TRAINING AND ASSESSMENT GUIDE Part B Competency Framework : Marine Terminal (Ship/Shore Interface) Operations for Oil, Chemical and Gas Competency Category : Plan Transfer Operations Competency
More informationInternational Safety Guide Chapter 23 for Inland Navigation Tank-barges and Terminals. Chapter 23 MOORING
Chapter 23 MOORING This Chapter deals with the preparations and procedures necessary to provide and maintain an efficient mooring arrangement whilst the tanker is berthed at a jetty. Exchange of information
More informationNAVIGATION AND SEAMANSHIP Secure vessel at mooring, anchor, and berth
1 of 5 level: 3 credit: 4 planned review date: December 2005 sub-field: purpose: entry information: accreditation option: moderation option: Maritime People credited with this unit standard are able to:
More informationGUIDELINES FOR SURVEY OF OIL FLOATING STORAGE VESSELS FIXED AT ANCHORAGE
GUIDANCE NOTES GD03-2017 CHINA CLASSIFICATION SOCIETY GUIDELINES FOR SURVEY OF OIL FLOATING STORAGE VESSELS FIXED AT ANCHORAGE 2017 Effective from 1 March 2017 BEIJING Chapter 1 GENERAL 1.1 Application
More informationMooring and unmooring
Mooring and unmooring This ARBO chapter is part of the Health and Safety Index for the shipping industry. It is intended to help employers to comply with the requirements of health and safety legislation.
More informationPORT TALBOT BULK TERMINAL MOORING OPERATIONS MANUAL
PORT TALBOT BULK TERMINAL MOORING OPERATIONS MANUAL ABP Marine Operations & Tata Burdening Departments 2017 RESPONSIBILLITIES Tata Steel UK (TSUK) is the operator of the Port Talbot Harbour Bulk Terminal.
More informationSOP GEN-007X Crane and Winch Operations
Page 1 of 7 SOP GEN-007X 1.0 Introduction 2.0 Responsibility 3.0 References 4.0 Training and Qualifications 5.0 Operational Inspections 6.0 Maintenance and Load Tests 7.0 Cranes 8.0 Winches 9.0 Mobile
More informationREVISED SOLAS REGULATION II-1/3-8 AND ASSOCIATED GUIDELINES (MSC.1/CIRC.1175) AND NEW GUIDELINES FOR SAFE MOORING OPERATIONS FOR ALL SHIPS
E SUB-COMMITTEE ON SHIP DESIGN AND CONSTRUCTION 3rd session Agenda item 15 SDC 3/15/1 16 October 2015 Original: ENGLISH REVISED SOLAS REGULATION II-1/3-8 AND ASSOCIATED GUIDELINES (MSC.1/CIRC.1175) AND
More informationGeneral Requirements for Vessels
General Requirements for Vessels Unless otherwise specified the following is provided in order to facilitate smooth and efficient operations while your Vessel is moored at our Terminal. All Vessels shall
More informationINSTALLATION PROCEDURE FOR OPGW FIBER OPTIC CABLES
Page 1 of 15 INSTALLATION PROCEDURE FOR OPGW FIBER OPTIC CABLES Page 2 of 15 1. PURPOSE 2. SCOPE 3. REFERENCES 4. GENERAL INDEX 5. PROCEDURES 5.1 Line survey 5.2 Transport, loading, unloading and storage
More informationGUIDELINES FOR USE GUARD
GUIDELINES FOR USE GUARD G Guard Range of Load Arrestors Retractable Fall Arrest Safety Line for Protection of Machinery & Sensitive Loads GLOBESTOCK MILE OAK INDUST. ESTATE, MAESBURY ROAD, OSWESTRY, SHROPSHIRE
More informationSafe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant
Health and Safety Executive Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant Background Accidents involving
More informationSEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components
Slinging, lifting and moving materials and components Overview This unit identifies the competencies you need to move loads by slinging and lifting in accordance with approved procedures. You will be required
More informationCAVING REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS
CAVING REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS NOLRS VERSION 2.2 October 2009 Outdoor Council of Australia Ph: (08) 9248 6677 1800 660 540 Fax: (08) 9248 5799 Email: nolrs@outdoorcouncil.asn.au
More informationRisk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
More informationParticipate in a rescue operation
PUASAR001B Unit Descriptor Employability Skills Prerequisite Unit(s) Corequisite Unit(s) Application of the Unit Unit Sector Participate in a rescue operation This unit covers the competency to participate
More informationP+P Retractable Type Fall Arrester PK6S
Designers, Manufacturers and Suppliers of Personal Protective Equipment Users Manual English Version P+P Retractable Type Fall Arrester PK6S 1 Thank you for purchasing this P+P Retractable Type Fall Arrester.
More informationOPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Ratings: Able Seafarer Deck
Page 1 of 7 Compiled by Approved by Chief Examiner Syllabus Committee:22 November 2011 OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Ratings: Page 2 of 7 1. Contribute
More informationSEMFEW205 - SQA Unit Code H1VP 04 Joining materials by the manual MIG/MAG and other continuous wire processes
Joining materials by the manual MIG/MAG and other continuous wire Overview This unit identifies the competencies you need to prepare and operate manual MIG, MAG or cored-wire arc welding equipment, in
More informationRelease: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
More informationSEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Arc processes
SEMFWE305 HY20 04 Welding materials by the Semi-Automatic MIG/MAG and Flux Cored Overview This standard identifies the competencies you need to prepare and operate semi-automatic MIG, MAG and flux cored
More informationJetty Information Booklet
Page 1 of 15 JETTY INFORMATION BOOKLET Revison Name Change Date Signature 1 S.Chatterjee Section 2.3,2.7,2.8,2.9,2.10,2.11 1 Aug 10 Action Name Title Date Signature Preparation S.Chatterjee Operations
More informationOperate a bridge or gantry crane (remote operation only)
Operate a bridge or gantry crane (remote operation only) Code OHSCER210A Workplace Health and Safety Queensland is moving to a new learning and assessment system for certificates to work in prescribed
More informationASC Confined Space Refresher
ASC Confined Space Refresher 4 Hours 12 This course refreshers information on the entry to confined spaces, for maintenance, servicing of vessels or other necessary reasons for all ASC work environments.
More informationSKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment
Overview This standard is for those who carry out routine calibrations at prescribed intervals in order to keep equipment in calibration. The job role will involve: 1. Performing calibration 2. Identifying
More informationIMO INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION LADDERS. Proposal for an amendment to SOLAS and associated guidelines
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON SHIP DESIGN AND EQUIPMENT 50th session Agenda item 5 DE 50/WP.8 7 March 2007 Original: ENGLISH INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION
More informationTLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN FOREST MACHINE OPERATIONS ASSESSMENT SCHEDULE FMO4 SKIDDING
NPTC Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN FOREST MACHINE OPERATIONS
More information1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment
Orignal Issue Date : 28-10-10 Date of Revision: Page- - 1-1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment (Slings & Ropes) 2.0 Reference: 3.0 Associated
More informationWARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
More informationSEMIC05 Installing mechanical equipment
Overview This unit identifies the competences you need to install mechanical equipment, in accordance with approved procedures. This will require you to survey the site for the proposed installation, and
More informationGUIDELINES FOR USE -GUARD
GUIDELINES FOR USE -GUARD G-Guard Range of Load Arresters Retractable able Fall Arrest Safety Line for Protection on of Machinery & Sensitive Loads Directive 2006/42/EC GLOBESTOCK Ltd MILE OAK INDUST.
More informationHangt de baggerindustrie aan een (zijden) draadje
Lloyd s Register: Business unit Marine Hangt de bagger industrie aan een (zijden) draadje Door: Cor Dekker Senior Specialist Marine Equipment & Lifting Components The Group at a glance 278 offices delivering
More informationGuidance on Line Management Plans (LMP)
Guidance on Line Management Plans (LMP) 9 Guidance on Line Management Plans INTERTANKO 2019* All rights reserved Whilst every effort has been made to ensure that the information contained in this publication
More informationEUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction
Locate and avoid supply apparatus for Utilities Network Construction Overview This national occupational standard defines the competence involved in locating and avoiding supply apparatus by using appropriate
More informationAbseiling (Natural Surfaces) REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS
Abseiling (Natural Surfaces) REGISTRATION LEVELS AND ASSESSMENT REQUIREMENTS NOLRS VERSION 2.2 October 2009 Outdoor Council of Australia Ph: (08) 9248 6677 1800 660 540 Fax: (08) 9248 5799 Email: nolrs@outdoorcouncil.asn.au
More informationLEVEL 3 NPTC CERTIFICATE OF COMPETENCE IN THE THOROUGH EXAMINATION OF ARBORICULTURAL EQUIPMENT. ASSESSMENT SCHEDULE (Revised Aug 2010)
Building 500, Abbey Park Stareton Warwickshire CV8 2LY Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 3 NPTC CERTIFICATE OF COMPETENCE IN THE THOROUGH EXAMINATION OF ARBORICULTURAL
More informationproperly applied assessment in the use.1 landmarks.1 approved in-service of ECDIS is not experience The primary method of fixing required for those
STCW Code Table A-II/3 Specification of minimum standard of for officers in charge of a navigational watch and for masters on ships of less than 500 gross tonnage engaged on near-coastal voyages Ref: https://www.edumaritime.net/stcw-code
More informationWARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
More informationGeneral maintenance engineering applications
Unit 068 General maintenance engineering applications Level: 2 Credit value: 12 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
More informationFunction: Navigation at the support level
STCW Code Table A-II/5 Specification of Minimum Standards of Competence of Ratings as Able Seafarer Deck Ref: https://www.edumaritime.net/stcw-code Source: IMO Function: Navigation at the support level
More informationSEMMME3-073 Checking that completed assemblies comply with specification
Checking that completed assemblies comply with specification Overview This unit identifies the competences you need to carry out checks on mechanical assemblies, in accordance with approved procedures.
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationLEARNER GUIDE. Transporter Safety (TRO) PO Box 2026 Mountain Gate VIC 3156 p: ABN: RTO: 21396
LEARNER GUIDE Transporter Safety (TRO) PO Box 2026 Mountain Gate VIC 3156 p: 03 9763 5449 ABN: 37 106 951 900 RTO: 21396 ASSESSOR GUIDELINES GENERAL 1. Introduction 1.1 Scope As the Assessment Instruments
More informationTechnical Briefing Note
Technical Briefing Note Subject Date Issued Revision Glossary of Terms 14th Nov 2017 Rev 3 The purpose of this Technical Briefing Note is to provide a glossary of terms commonly used in fall injury prevention
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE AND OPERATION OF MOBILE ELEVATED WORK PLATFORMS
NPTC Registered Charity No. 1096429 NATIONAL AGRICULTURAL CENTRE STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7669 6553 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE
More informationRSPH Level 2 Certificate for Proficiency in Poultry Meat Inspection
RSPH Level 2 Certificate for Proficiency in Poultry Meat Inspection December 2017 Ofqual Qualification Number: 600/0301/7 GLH: 122 TQT: 132 Description The objective of the Level 2 Certificate for Proficiency
More informationOPERATIONS MANUAL RIGHT ANGLE CAPSTAN
OPERATIONS MANUAL RIGHT ANGLE CAPSTAN TABLE OF CONTENTS Patterson Heritage... 3 ISO 9001 Certification and Affiliates... 4 Warranty and Return Policy... 5 Important Operations Manual Instructions, Basic
More informationLock Out/Tag Out Control of Hazardous Energy
Lock Out/Tag Out Control of Hazardous Energy University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective UF
More informationSafe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More information8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
More informationSLOP RECEPTION AND PROCESSING FACILITIES
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL SERVICE AND TYPE ADDITIONAL CLASS PART 5 CHAPTER 8 SLOP RECEPTION AND PROCESSING FACILITIES JANUARY 2011 CONTENTS PAGE Sec. 1 General Requirements...
More informationGM/GN2646. Guidance on Axle Bearing Maintenance. Issue One: March 2011 Rail Industry Guidance Note for GM/RT2004 Issue Four
GN Published by: Block 2 Angel Square 1 Torrens Street London EC1V 1NY Copyright 2011 Rail Safety and Standards Board Limited GM/GN2646 Issue One: March 2011 Rail Industry Guidance Note for GM/RT2004 Issue
More informationNAVSEA STANDARD ITEM. 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide
NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 26 MARCH 2018 CATEGORY: I 1. SCOPE: 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide 2. REFERENCES:
More informationSHIP DESIGN AND EQUIPMENT
E MARITIME SAFETY COMMITTEE 92nd session Agenda item 13 MSC 92/INF.7 5 April 2013 ENGLISH ONLY SHIP DESIGN AND EQUIPMENT Sample form for ship-specific plans and procedures for recovery of persons from
More informationPRESSURE SYSTEMS POLICY
PRESSURE SYSTEMS POLICY PRESSURE SYSTEMS POLICY 1. Introduction 2. Policy Statement 3. Scope 4. Background 5. Roles & Responsibilities 6. Training 7. Contractors 8. Policy Review 1. Introduction The Kilmarnock
More informationGENERAL GUIDELINES FOR PROPER RIGGING PRACTICES AND INSPECTION & REMOVAL CRITERIA FOR SLINGS PER OSHA
GENERAL GUIDELINES FOR PROPER RIGGING PRACTICES AND INSPECTION & REMOVAL CRITERIA FOR SLINGS PER OSHA 1910.184 SAFE OPERATING PRACTICES -.Whenever any sling is used, the following practices shall be observed:
More informationGeneral maintenance engineering applications
Unit 868 General maintenance engineering applications UAN: J/600/6007 Level: Level 2 Credit value: 12 GLH: 55 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: This unit has been derived
More informationHealth & Safety Policy & Plan. Rightway Roofing.
Health & Safety Policy & Plan. Rightway Roofing. Valid: 02/2012-02/2013 Contents ( 1 ) Policy Statement. ( 2 ) Hazard Identification. ( 3 ) Hazard Management. ( 4 ) Induction & Training. ( 5 ) Monitoring
More informationEXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors
Appendix 1 Health & Safety Declaration, Roles and Responsibilities Each exhibitor and Informa appointed contractor must complete the Health and Safety Declaration form provided below to confirm they have
More informationLNG TANDEM OFFLOADING A KEY ENABLING TECHNOLOGY TO MAKE LNG PRODUCTION OFFSHORE HAPPEN
LNG TANDEM OFFLOADING A KEY ENABLING TECHNOLOGY TO MAKE LNG PRODUCTION OFFSHORE HAPPEN Fabrice Dumortier 1, Jean-Pierre Queau 1, Jean-Robert Fournier 2 1. SBM Offshore 2. SBM Offshore Keywords: 1. LNG;
More informationNew Mexico Institute of Mining & Technology. Fall Protection Program
New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately
More information11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions)
11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) This checklist shall be completed either by the Competent Person or a person trained and designated by the
More informationSIP005 GUIDANCE ON MOORING
SIP005 GUIDANCE ON MOORING DISCLAIMER This guidance has been produced by the ports industry, with assistance from the Health and Safety Executive, to help those who owe duties under health and safety legislation
More informationSafety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER)
Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Key word(s) : Work equipment. Using, maintaining and repairing. Information, instruction and supervision. Risk Assessment.
More informationLNG Bunker Checklist Ship to Ship
LNG Bunker Checklist Ship to Ship PRT : Planning Stage Checklist This part of the checklist should be completed in the planning stage of an LNG bunker operation. It is a recommended guideline for the,
More informationANNEX 2 RESOLUTION MEPC.124(53) Adopted on 22 July 2005 GUIDELINES FOR BALLAST WATER EXCHANGE (G6) THE MARINE ENVIRONMENT PROTECTION COMMITTEE,
Page 1 RESOLUTION MEPC.124(53) Adopted on 22 July 2005 GUIDELINES FOR BALLAST WATER EXCHANGE (G6) THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention on the International
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Requirements for Contractor Cranes, Multi-Purpose Machines and Material Handling Equipment at Naval Facilities; accomplish
More informationManagement Plan for Electrical Safety ISD #535
Management Plan for Electrical Safety ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9 ½ Street Rochester, MN 55904 507-328-4507 MANAGEMENT PLAN FOR ELECTRICAL SAFETY Table of Contents
More informationElectrical, electronic and control engineering at the operational level
STCW Code Table A-III/6 Specification of minimum standard of for electro-technical officers Ref: https://www.edumaritime.net/stcw-code Source: IMO Function: Electrical, electronic and control engineering
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationINSTRUCTIONS FOR USING THE RISK ASSESSMENT FORM
INSTRUCTIONS FOR USING THE RISK ASSESSMENT FORM 1. Envisage the task in hand and identify the hazards associated with carrying out the task. These hazards are to be listed and addressed individually in
More informationINNOVATIVE MOORING SYSTEMS
INNOVATIVE MOORING SYSTEMS VESSEL AUTOMOORING MODULES QUAY AUTOMOORING INSTALLATIONS DOCKLOCK brings mooring to a next level PAGE 2 FOR OVER A CENTURY THE WORLD S LEADING EXPERT IN MOORING, BERTHING AND
More informationRecognition for Unit of Competency
Apply seamanship skills and techniques when operating a small vessel with Teaching Section: Maritime Step 1: Read the unit competency requirements (If you have the skills/knowledge to meet these elements,
More informationSEMEEE36 Checking the compliance of electrical equipment against the specification
Checking the compliance of electrical equipment against the Overview This unit identifies the competences you need to carry out compliance checks on electrical equipment, in accordance with approved procedures.
More informationQPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems
Performing Engineering Operations QPEO2/037N Credit Value: 15 QCF Level: 2 GLH: 68 Maintaining electrical equipment/systems Learner Name: 2013 Excellence, Achievement & Learning Ltd EAL Assessment Route
More informationSEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment
Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,
More informationINSTRUCTIONS FOR USE
INSTRUCTIONS FOR USE 7100 Series Lanyards Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046 Deer Park, TX 77536 Phone :
More informationPRO Lifting Operations
MS&L Procedure PRO-4.5-0001-1-06 Lifting Operations Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control
More informationLifting Equipment Procedure. Committees / Group Date Consultation: Health and Safety Sub Committee Nov 2016
Title of Standard Operation Procedure: Lifting Equipment Procedure ocedure: Person(s) responsible for the Health and Safety Manager production of report e Reference Number: H&S Procedure 16 Version No:
More informationWorking Near, On or Above Water
APPROVALS Position Name Date President Donna Stobbart DISCLAIMER: City Transfer nor any person acting on its behalf, makes any warranty, express or implicit, with respect to the use of information, data,
More informationPART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT)
PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) WAC Page 296-307-320 Control of hazardous energy (lockout-tagout). 1 296-307-32001 What does this section cover? 1 296-307-32003 When does this section
More informationWorker s Safety Handbook for Rigger and Signalman
Worker s Safety Handbook for Rigger and Signalman Contents Preface 3 Proper Attire for Rigger and Signalman 4 Roles and Responsibilities of a Rigger 5 Good and Bad Rigging Practices 12 Inspection of Hooks
More informationCPCS renewal test factsheet
CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the
More informationAppointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet.
Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet. Planning and regulatory requirements (Regulatory requirements) The role or duties
More informationCURRICULUM DEVELOPMENT ADVISORY. Rigger and Signalman Course
CURRICULUM DEVELOPMENT ADVISORY Rigger and Signalman Course Version 1.0 1 Nov 2011 Workplace Safety and Health Council, Ministry of Manpower, Singapore (MOM) All rights reserved. This document is provided
More information"RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationSEMAER2_41 Dismantling and removing aircraft access structures
Overview This unit identifies the competences you need to dismantle and remove aircraft access structures, in accordance with approved procedures. You will be required to dismantle and remove the access
More informationUser Instruction Manual Fixed Beam Anchor
Instructions for the following series products: FIXED BEAM ANCHOR Model Numbers: The Ultimate in Fall Protection 2108406 2108407 2108408 2108409 2108410 2108411 User Instruction Manual Fixed Beam Anchor
More informationUniversity College Dublin Machinery/Equipment Risk Assessment Template
1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment
More informationIMCA Competence Assessment Portfolio June 2013
Self- Checklist Entry Level Criteria Acceptance Criteria Attained Completed diver training to IMCA-recognised closed bell Valid training/competence certificate or surface-supplied diver qualification*
More informationInspecting a motorsport vehicle during a competition
Unit 057 Inspecting a motorsport vehicle during a Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to inspect
More informationHARBOUR MASTER S WRITTEN INSTRUCTIONS FOR THE HANDLING OF BULK FLAMMABLE LIQUIDS...1
HARBOUR MASTER S WRITTEN INSTRUCTIONS, 2007 Issued in terms of the National Ports Act No. 12 of 2005, Section (74)(3) HARBOUR MASTER S WRITTEN INSTRUCTIONS FOR THE HANDLING OF BULK FLAMMABLE LIQUIDS...1
More informationSEMPEO SQA Unit Code FP2P 04 Maintaining fluid power equipment
Overview This standard covers a broad range of basic fluid power maintenance competences which will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education
More informationSection 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
More informationCONFINED SPACE WRITTEN PROGRAM
CONFINED SPACE WRITTEN PROGRAM Maple River Public Schools ISD#2135 Confined Space Entry Plan (Permit Required) Maple River Public School Plan last updated: October, 2014 Authority and Scope Regulation:
More informationTechnical Literature. Plasma. Rope Quick Q & A
Technical Literature Plasma Rope Quick Q & A Plasma Rope Properties & Performance Plasma Rope "Quick" Q & A This brief guide is designed as a quick reference guide to basic questions on Cortland s Plasma
More informationAppendix 11-B Anchor Handling Systems, Set Up and Handling
Revision History Revision Date Section Changes Number 1 Sept 1 Permanent Chaser Pendant (PCP) Drawing updated 2018 2 Pennant Buoy System Drawing updated 3 Working Wire/Chaser Termination on Drawing updated
More informationFALL PROTECTION SAFETY PROGRAM
FALL PROTECTION SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.66-29 CFR 1910.128, 129, 130, 131, (Proposed) - 29 CFR 1926.104-29 CFR 1926.500-503 BASIS: Approximately 300,000 disabling injuries
More information