SPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:
|
|
- Nigel Rose
- 6 years ago
- Views:
Transcription
1 SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at:
2 FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than the ISO 99/ spool valves. Two models are available : - Series 8 (VDM size ISO 0) = standardised size : 8 mm - Series 9 (VDM size ISO 0) = standardised size : 6 mm GNRL Fluid air or neutral gas, fi ltered, lubricated or not Operating pressure, to 8 bar (série 8) / to 0 bar (series 9) (with internal pilot pressure supply) 0 to 8 bar (série 8) / -0,90 to 0 bar (series 9) (with external pilot pressure supply) mbient temperature + C to +0 C (series 8) / + C to +60 C (series 9) Flow (Qv at 6 bar) series 8 00 l/min (NR) series 9 0 l/min (NR) s single or joinable G/8 - G/ CONSTRUCTION VLV Body series 8 light alloy and cover in POM (polyacetal) series 9 Injected aluminium and cover in P (polyarylamide) Internal parts series 8 stainless steel, light alloy and POM (polyacetal) series 9 POM (polyacetal) and aluminium Seals NBR (nitrile) PILOT / solenoid valve NC, series 0, with CNOMO N (x) mounting surface (see P0B) LCTRICL CHRCTRISTICS Type of coil Size SPCIFICTIONS x / NC-NC NO-NO function symbol SPOOL VLVS solenoid air operated ISO VDM 6 subbase-mounted body CNOMO pilots, size Voltages V = operators solenoid air operated pilot () () spring spring Consumption W pilot pressure (bar) Insulation class min. max. size F IP 6 = Pressure, = Outlets, = xhausts Protection degree spring NC-NO, 0 ISO spring, 0 ISO differential, , 0 ISO / solenoid differential 0 ISO ISO solenoid air 0 ISO pressure held, 8 ISO W, 0 ISO pressure applied, 8 ISO / W, 0 ISO pressure release, 8 ISO W, 0 ISO (M) Type of manual operator on pilot(s): : impulse The series 8 spool valve is equiped with seals which allow either : - internal supply (mark INT) / external supply (mark XT) xternal supply allows use of this material with fl uids from 0 to 8 bar The equipment is supplied with internal supply (seals in INT position) OPTION : Intrinsically safe solenoid pilot valve x ia Internal pressure supply (INT) P68- INT XT /-/ Series 8-9 Type ISO sizes 0-0 = Return = Pilot lectrical connection spade plug size connector, DIN 60, 9, mm, industry standard B, rotatable by 90 catalogue numbers spool valve + solenoid valve quantity and cat. n internal supply external supply, 0 ISO , 0 ISO with connector size + x + x + x INT XT (M) 00-D xternal pressure supply (XT)
3 ISO 0-0 SPOOL VLVS SUBBSS ND CCSSORIS CCSSORIS DSIGNTION Connector size with cable, m long Connector size with built-in visual indication and protection, with cable outlet, m long (see P9-). dditional accessories: see P68-0. catalogue number 8867 V =/~ 8880 SUBBSS Type of subbase DSIGNTION Type of port SIZ PORTS catalogue number Single subbase Side ISO 0 ISO 0 G /8 G /8 G /8 M00 G / G / G / M006 - G /8 - M007 Joinable subbases () Side ISO 0 ISO 0 Set of endplates G / - G / Set of plugs on main pressure () and exhausts (-) G / for different pressure supplies (see below) 88 - G / - M008 Set of endplates G /8 - G /8-880 Set of plugs on main pressure () and exhausts (-) for different pressure supplies (see below) 88 () Joinable subbases are connected together with modular rods. Joinable subbases are fastened to a symmetrical mounting rail to N 00 by means of a hexagon socket screw. P Picture : Spool valves with pad-mount pilots on joinable subbases Mounting principle of the set of plugs allowing the joinable subbases to be supplied with different pressures. P, mm P68-
4 JOINBL SUBBSS with side outlets and, and side, and with mating surfaces to ISO 07/ - size 0 ISO 0-0 SPOOL VLVS JOINBLS SUBBSS CONNCTION OPTIONS The endplates provide for connection of pressure port () and exhaust (-) at the sides at the ends of the assembly (see fi g. and ). The joinable subbases provide for connection of outlet and on the right-hand side (see fi g. and ). Connection of and on the sides of endplates or the left-hand and right-hand sides of the subbases. Blank off unused holes. s are joined together with modular rods. fi g. (right-hand side view) - - fi g. UNIT SUPPLID WITH TWO DIFFRNT PRSSURS insertion of a set of blanks P P spool valves supplied with P, mm spool valves supplied with P Joinable subbases are connected together with modular rods. Joinable subbases are fastened to a symmetrical mounting rail to N 00 by means of a hexagon socket screw. P68-
5 ISO 0 SPOOL VLVS DIMNSIONS ND WIGHT DIMNSIONS (mm), WIGHT (kg) Spool valve on single subbase - series 9 Pilot with connector size. For connector M see P0-. weight spool valve + subbase with pilot with pilots 0,6 0, , 8 Ø, n Ø -- G / - G / - M 7 9,6 ==, 0 7 Spool valve on joinable subbases - series 9 9 0,, number of subbases dimension B weight spool valve + pilots + subbases + end plates 66, 9,00 8,,0 0,,060 6,,70 7, 70, , 89, ,0, x Ø, 8 6 n Ø -- G /8 - G / - M 6, B P68-
6 ISO 0 SPOOL VLVS DIMNSIONS ND WIGHT DIMNSIONS (mm), WIGHT (kg) Spool valve on single subbase - series 8 B C Bottom view D Q T F L M N P R G == H J K S Spool Port orifi ces valve M G / G /8 Weight (kg) Spool spool valve + subbase valve with pilot with pilots 8 0,0 0,00 Spool Dimensions (mm) valve B B C D F G H J K L M N P Q R S ØT / / / / / / ,, 0 8, 8, , P68-6 P68-
7 ISO 0 SPOOL VLVS DIMNSIONS ND WIGHT DIMNSIONS (mm), WIGHT (kg) Spool valve on joinable subbases - series 8 C B C D G F K L H H H S T U N P X Q Q Q W Y P X J x ØV V == Spool Dimensions (mm) valves B B C D F G H H H J K L N P Q / / / / / / ,8, 8, 8, 9 Spool valves s mounting 8 (ISO 0) : Ø, P68-6 Dimensions (mm) S T U U V V X 8 7, - - 9,,7 Spool Port orifi ces valves M G / G /8 Number of subbases dimensions (mm) 8 (ISO 0) weights (kg) spool valves + pilots + subbases + ends W Y 66, 9,60 8,,600 0,,90 6,,80 7, 70,60 8 6, 89, ,0 monostable spool valve weighs.06 kg less than a bistable valve P68-7
8 V DC SPOOL VLVS solenoid air operated ISO VDM 6 subbase-mounted body CNOMO pilots, size GNRL Fluid ir or neutral gaz, fi ltered, lubricated or not Operating pressure to 0 bar (with internal supply to pilot) -0,90 bar to +0 bar (with external supply to pilot) mbient temperature + C to +60 C Flow (Qv at 6 bar) 0 l/min (NR) - conforming to ISO 68 C =,0 x 0 8 m /s.pa (sonic conductance) b = 0,8 (absolute static pressure) Base ISO VDM 6 Single or joinable subbases x/-/-/ Series 9 Type ISO size 0 (6 mm) CONSTRUCTION SPOOL VLVS Body Injected aluminium Top cover, end covers P (polyarylamide) Internal parts POM (polyacetal) and aluminium Seals NBR (nitrile) PILOTS (see page P0B) Solenoid valves / NC, series 0, pad mounting ISO 8 (CNOMO N, size) Ports = Pressure supply - = Outlets - = xhausts 8/8 = Pilot exhaust Type of SV Voltage Consumption Insulation class Protection degree lectrical connection Series 0 V =,W F IP 6 Centralised M connection CNOMO 0.6.0N on socket with male pins SPCIFICTIONS x / NC-NC / / symbols functions (M) Type of manual override on pilot(s): : impulse P68-8 pilot () () Solenoid-air pilot - Spring Solenoid-air pilot - Spring Solenoid-air pilot - Differential Solenoid air pilot - Solenoid differential pilot pressure () (bar) catalogue number spool valve with series 0 pilot(s) - pilot pressure supply: min. max. internal (M) external (M), , , , Solenoid-air pilot and Pressure held W Solenoid-air operated Pressure applied W Solenoid-air operated Pressure release W Solenoid-air operated, , , P68-7
9 V DC ISO 0 SPOOL VLVS CHOIC OF QUIPMNT (see table on page P68-) DISPLY ND CONNCTION OF M CONNCTOR (V DC only) DISPLY ND CONNCTION OF M CONNCTOR (V DC only) Bistable valves Monostable valves B D C () () F Contact Connection = Coil = Common (0V) = Coil : Operator pilot valve () B: Yellow LD indicating energisation of pilot valve (operator) C: Return pilot valve (), bistable or / D: Yellow LD indicating energisation of pilot valve () : Bulkhead connector, male contacts, CNOMO 0.6.0N, for electrical connection of two pilot valves. F: Yellow LD indicating energisation of pilot valve. NOT: The built-in electrical protection is provided by bi-directional Transil diodes. ssignment is as per ISO/CD00 standard. Monostable spool valves Bistable and / spool valves P68-8 P68-9
10 SPCIFICTIONS ISO 0 SPOOL VLVS CCSSORIS Description Diagram catalogue number Blanking plate to cover interface ISO 0 This plate allows later assembly of a spool valve. Plate Sandwich flow regulator This unit, which is fi tted between a subbase and a valve, incorporates fl ow regulators in the exhaust and. These flow regulators are designed to control the speed of a cylinder rod. Spool valve MODUL Sandwich pressure regulator module This module, which is placed between a subbase and a spool valve, is designed to control the pressure as follows: - djustable pressure: 0. to 0 bar - G/8 () port on top for pressure gauge connection - Locking pull-turn-push type adjustment button on port (supply pressure) on port on port regulator fl ow at 6 bar: 0 l/min weight: 0.0kg regulator fl ow at 6 bar: 0 l/min weight: 0.0kg regulator fl ow at 6 bar: 0 l/min weight: 0.0kg Spool valve () MODUL Button on port side L = 8mm L L =mm on and regulator fl ow at 6 bar: 0 l/min weight: 0.70kg 6007 G/8 bracket connection for pressure gauge mounting Sandwich fl ow regulator P68-0 Sandwich pressure regulator module P68-9
11 V DC ISO 0 SPOOL VLVS DIMNSIONS ND WIGHT DIMNSIONS ND WIGHTS SPOOL VLVS ON SINGL SUBBSS Side Bottom Detail of underside hole pattern 8 Mounting holes Ø. 8 Mounting holes Ø ,6 ==, 0 9, Total weight with pilot Total weight with pilots = 0,0 kg = 0,0 kg Catalogue Connection number subbases M G /8 G / M G / G / Total weight with pilot Total weight with pilots = 0, kg = 0,9 kg Catalogue Connection number subbases M G /8 G /8 00 M G / G / SPOOL VLVS ON JOINBL SUBBSS WITH SID OUTLTS Ports --: G /8 Ports -: G / Ports -: M,, 6, , 8 6, x Ø, 0 B 0 Number Dimensions of subbases (mm) B Weights (kg) subbases + endplates + spool valves with pilot with pilots 0 6,,66 9,87, 8 8,700,8 8,7, 6 7,86, ,9, ,99, ,7 0,609 P68-0 P68-
Pneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
More informationPneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
More informationMULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
More informationPneumatic spool valve islands
neumatic spool valve islands A7.GB.R MGA SOOL VALV ISLANDS MGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their design,
More informationTECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
More informationNugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
More informationValves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot
ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043
More informationNugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationValves to ISO 5599/1 standards pilot and solenoid actuated size
Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted
More informationseriesuds ISO Valves to ISO 5599/1 standard
seriesuds ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and pneumatic functions according to the interface to ISO 5599/1
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
More informationseries UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS
series UDS ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and functions according to the interface to ISO 5599/1 standard
More informationfiltered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More information3-Way Safety Block DSV
3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with
More informationInverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
More informationProp. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1 and ISO2 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation.
More informationInverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
More informationInverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
More informationSpool compact valves pilot and solenoid actuated G 1/8 - G 1/4
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 DESCRIPTION Valves series "MEK", in the 5/ and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow.
More informationInverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
More information1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type
Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing
More informationSPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
More informationseriesek Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 DESCRIPTION Spool valves series EK 2.43 MATERIALS TECHNICAL DATA SPARE PARTS
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, 5/ and pneumatic functions. The piloting solenoid valve can be assembled perpendicular
More informationSeries 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
More informationV83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
More informationSolenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationSafety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
More informationValves series A1 1/2, 3/2, electrically operated
1/, 3/, electrically operated Executions 3/ NC 0113 A1E430 3/ NO 3 0 A1E431 1 3 3/ 03 A1E43 3/ NC 3/, 0137 A1K430 08 A1K43 Series of spool valves, with static seals, high flow, for panel mounting. Coils
More informationProportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
More informationRegulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
More informationDirectional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationDesde1963. Válvulas Pilotadas. Proveedor Integral. la Industria
esde96 Válvulas Pilotadas Proveedor Integral de Por Soluciones Aire para la Industria Otras válvulas de proceso Cuerpos de Bronce, hierro fundido y conexión bridada, para completar la gama de soluciones.
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationIntrinsically safe solenoid valves on/off controls - ATEX certification
www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationSolenoid Valves VUVG Overview
Solenoid Valves VUVG Overview Universal valve Combination of basic valve and E-boxes Width 10 mm and 14 mm In-line valves VUVG-L and VUVG-S Sub-base valves VUVG-B Internal or external pilot air supply
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S 3 4 2 Electropneumatically operated valves Series 3 and 4 Series 3: G1/8, 3/2 - way and 5/2 - way Series 4: G1/8, G1/4 and G1/2 3/2, 5/2 and 5/3 - way GENERAL DATA Construction Valve group
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationMass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8626 can be combined with Inline MFC for full scale rates from 25 l N /min to 1.500 l N /min; 1/4 to 3/4 High accuracy Short settling time Fieldbus option Type
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
More informationMECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More information2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
More informationEx-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC
www.atos.com Table -2/E Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification TEX, IEEx, E valve body spool ex-proof solenoid ex-proof inductive
More informationPARTICULATE FILTER/REGULATOR
PRTICULTE FILTER/REGULTOR High flow with a wide range of adjustable output pressure ranges Optional low profile integrated gauge, Optional extended temperature range of -40 C to +80 C Threaded ports allow
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationMass Flow Meter (MFM) for Gases
873 Mass Flow Meter (MFM) for Gases Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy Short response time Compact design and digital
More informationMV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:
MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve
More informationValvex Valves for Mining Applications
Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.
More information2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm Port connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationBores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
More informationMOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE
TYPICAL PERFORMANCE SPECIFICATIONS DESCRIPTION These proportional valves are direct operated pressure reducing valves. They can be used to control pressure in parts of a circuit. This valve incorporates
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1.1.1 Key to the circuit diagram Circuit diagram The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies
More informationHeavy Metal Stainless Steel Valves
2.10 page 187 2.10 Heavy Metal Stainless Steel Valves Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.12. 316
More informationG1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
More informationCheck valve hydraulically pilot operated
Check valve hydraulically pilot operated RE 6/7.5 Replaces:. / Types SV and SL Nominal sizes to Component series X Maximum operating pressure 5 bar Maximum flow 55 l/min H555 Overview of contents Contents
More informationMATERIALS SPARE PARTS. iting pressure (b. Spool compact valves series MEK
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 Valves series "MEK", in trie and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow. The kind
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationE28/Q28 Safety Exhaust Valve Externally Monitored
E8/Q8 Safety Exhaust Valve Externally Monitored ulletin 9EM4 the total systems approach to air preparation Features Externally Monitored Safety Exhaust Valve Function When applications demand a safe environment
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
More information4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)
4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31
More informationTANDEM MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR
SIT Group 836-837 TANDEM MULTIFUNCTIONAL GAS CONTROL MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR ALL ADJUSTMENTS ACCESSIBLE FROM ABOVE
More information2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm ort connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital
More informationFEPA PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG
PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG TECHNICAL CHARACTERISTICS Number of ways / positions : 3/2, 3/3, 5/2, 5/3, 5/4 Nominal sizes (ND) : 4, 6, 9, 12 Medium : compressed
More informationRE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09.
Meter out pressure compensator Sandwich plate design Type SCA... /Series X Sizes 6, 5 up to 35 bar up to 35 L/min RE 9 47/.96 RE 9 47/.96 Replaces: 9.87 Sandwich plate design Load compensation in lines
More informationFlow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,
More informationRegulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K
Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK
More informationCALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
More informationMULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE
SIT Group SIT -3- SIGMA MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE 9.955. Subject to change without notice Application Domestic gas appliances: central heating boilers, combi boilers, instantaneous
More informationSDM to 8 sections monoblock valve D1WWDA02A
SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationModular Type Regulators
Modular Type Regulators Series AR AC Regulator Series AR Port size Options AFARAL, 1/4 Bracket AFAR AWAL AR4-A, 1/2 Round type pressure gauge With set nut (for panel mount) AFAFMAR P.45 to 5 AR4-6-A ot
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationGas Pressure Regulator HON 300
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction
More informationPneumatic pressure switch 20DD
Sensor system: stainless steel 0,2 to 6 bar Microswitch with gold plated contacts (suitable for intrinsically safe operation) High accuracy (max. scattering < 1,5%) Excellent sealing properties (better
More informationSeries IRV1000/2000/3000
CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one
More information3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More information