EC safety data sheet. 1.) Identification of the substance/preparation and of the company/undertaking. 2.) Hazards identification

Transcription

1 1.) Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation Trade name edding 8404 aerospace marker Use of the substance/preparation Ink for use in drawliners Company/undertaking identification Address edding Aktiengesellschaft Bookkoppel 7 D Ahrensburg Telephone no. +49 (0) / Information provided by / telephone +49 (0) Emergency telephone +49 (0) (Toxic Substance Emergency Call Centre Berlin) Advice on Safety Data Sheet sdb_info@umco.de 2.) Hazards identification Hazard symbols R phrases Particular information pertaining specific risk for human / environment The product does not require a hazard warning label in accordance with Directive 1999/45/EC. No special hazards have to be mentioned. But please observe the information given in this safety data sheet. 3.) Composition / information on ingredients Chemical characterization Aqueous preparation Hazardous ingredients ETHANE-1,2-DIOL EC no Index no CAS no Concentration > 1 < 5 %-b.w. Classification Xn; R22 Hazard symbols Xn R phrases 22 CARBON BLACK EC no Index no. - CAS no Concentration > 5 < 15 %-b.w. Classification - Hazard symbols - R phrases - Other information (chapter 3.) The data subject of this Material Safety Data sheet refer to the ink contained in this product (marker). Seite 1(5)

2 4.) First aid measures General information In case of persisting adverse effects, consult a physician. Remove contaminated clothing and shoes immediately, and launder thoroughly before reusing. After inhalation Ensure supply of fresh air. After skin contact Wash off immediately with soap and water. After eye contact Separate eyelids, wash the eyes thoroughly with water (15 min.). After ingestion Rinse mouth thoroughly with water. Summon a doctor immediately. Never give anything by mouth to an unconscious person. 5.) Fire-fighting measures Suitable extinguishing media Foam; Carbon dioxide; extinguishing powder; Water spray jet Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases None known Special protective equipment for fire-fighters Use self-contained breathing apparatus. Wear protective clothing. 6.) Accidental release measures Personal precautions Refer to protective measures listed in sections 7 and 8. Avoid contact with skin, eyes and clothing. Environmental precautions Do not discharge into the drains/surface waters/groundwater. Methods for cleaning up/taking up Take up with absorbent material (e.g., sand, kieselguhr, universal binder). When picked up, treat material as prescribed under heading "Disposal considerations". 7.) Handling and storage Handling Advice on safe handling Provide good ventilation of working area (local exhaust ventilation, if necessary). Observe the usual precautions for handling chemicals. Advice on protection against fire and explosion No special measures necessary. Storage Requirements for storage rooms and vessels Store product in closed containers. Advice on storage assembly None known Further information on storage conditions Keep container tightly closed and dry in a cool, well-ventilated place. Seite 2(5)

3 8.) Exposure controls / personal protection Exposure limit values ETHANE-1,2-DIOL CAS no EC no /39/EWG Ethylene glycol TWA 52 mg/m³ 20 ml/m³ STEL 104 mg/m³ 40 ml/m³ Skin Ethane 1,2-diol particulate TWA 10 mg/m³ Sk Ethane 1,2-diol vapour TWA 52 mg/m³ STEL 104 mg/m³ Sk CARBON BLACK CAS no EC no Carbon black TWA 3,5 mg/m³ STEL 7 mg/m³ Personal protective equipment Respiratory protection If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified. Hand protection In case of intensive contact, wear protective gloves (EN 374). Before use, the protective glove should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves. Eye protection Safety glasses (EN 166) Skin protection Clothing as usual in the chemical industry. General protective and hygiene measures Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Avoid contact with eyes and skin. Remove soiled or soaked clothing immediately. Wash hands before breaks and after work. Seite 3(5)

4 9.) Physical and chemical properties General information Form Colour Odour liquid black weak Important health, safety and environmental information Changes in physical state Value Flash point Density Value Solubility in water 10.) Stability and reactivity Materials to avoid None known. no data available not applicable no data available miscible Hazardous decomposition products No hazardous decomposition products known. 11.) Toxicological information Experience in practice Repeated and prolonged skin contact may cause removal of natural fat from the skin and irritation of the skin. Eye contact with the product may lead to irritation. Other information (chapter 11.) Product specific toxicological data are not known. 12.) Ecological information Other adverse effects Ecological data are not available. Do not discharge product unmonitored into the environment. 13.) Disposal considerations Product Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company. Packaging Residuals must be removed from packaging and when emptied completely disposed of in accordance with the regulations for waste removal. Incompletely emptied packaging must be disposed of in the form of disposal specified by the regional disposer. 14.) Transport information Other information (chapter 14.) The product is not defined under national/international road, rail, sea and air transport regulations as a hazardous material. Seite 4(5)

5 15.) Regulatory information Labelling in accordance with EC directives The product does not require a hazard warning label in accordance with EC Directive 1999/45/EC. The data subject of this Material Safety Data sheet refer to the ink contained in this product (marker). Hazard symbols R phrases Special labelling for certain preparations "Safety data sheet available for professional user on request." Council Directive 96/82/EC on the control of major-accident hazards involving dangerous substances Annex I, part 1 + 2: not mentioned. With regard to possibly appropriate decomposition products see Chapter ) Other information Sources of key data used to compile the data sheet: EC Directive 67/548/EC resp. 99/45/EC as amended in each case. Regulation (EC) No 1907/2006 (REACH) as amended in each case. EC Directives 2000/39/EC, 2006/15/EC as amended in each case. National Threshold Limit Values of the corresponding countries as amended in each case. Transport regulations according to ADR, RID, IMDG, IATA as amended in each case. The data sources used to determine physical, toxic and ecotoxic data, are indicated directly in the corresponding chapter. Relevant R-phrases (chapter 3): 22 Harmful if swallowed. Department issuing safety data sheet UMCO Umwelt Consult GmbH Georg-Wilhelm-Str. 183 b, D Hamburg Tel.: / Fax: / umco@umco.de This information is based on our present state of knowledge. However, it should not constitute a guarantee for any specific product properties and shall not establish a legally valid relationship. Seite 5(5)